Load Balancing From UMTS to GSM

download Load Balancing From UMTS to GSM

of 2

Transcript of Load Balancing From UMTS to GSM

  • 7/26/2019 Load Balancing From UMTS to GSM

    1/2

    Load Balancing from UMTS to GSM

  • 7/26/2019 Load Balancing From UMTS to GSM

    2/2

    Load Balancing from UMTS to GSM

    Currently, I have configured DRD and LDR on UMTS cells. However, this last one (LDR algorithm) takes actions slowly a

    congested.

    - PUC is a good algorithm, but it just works between interfrequency cells.

    Do you know another way to balance traffic load between interRAT cells before UE accesses an UTRAN cell?

    *****************************

    -change the selection/reselection parameters

    -enable cell breathing (LDB)

    *****************************

    Increase 2D and 2F event threshold to push more traffic on GSM

    Disable intersystem 2G->3G HO for CS service if active

    Review the idle mode parametrisation (selection/reselection param)