LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime...

17

Transcript of LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime...

Page 1: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 2: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 3: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 4: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 5: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 6: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 7: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 8: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 9: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 10: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 11: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 12: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 13: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 14: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 15: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 16: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond
Page 17: LMST 3(1-2) - Nanyang Technological University · as in turning, milling, ... and on ductile-regime machining of brittle materials. ... at the wafer surface were machined with diamond