LLC Training Syllabus

8/4/2019 LLC Training Syllabus

1/11


2/11

BACKGROUND

Proper knowledgable resources in RF are always in highdemands Knowledgeable resources may be built through:

Direct involvement with the projectsTraining programs on the tools, methods, and vendorsequipments

Understanding this, Lexcorp Lerning Center (LLC) hasdesigned excellent training programs The designed training programs match with the resourcerequirement needs because of the inhouse training tools


3/11

TRAINING FACILITIES AND TOOLS

Spacious and comfortable training rooms Computer in each table for accessing the trainingapplications Training tools:TEMS Equipments RF Planning Tool Simulation Command Handling tools Simulation of real cellular network architecture Access to other supporting tools (CRONOS,CRONERF, EXERT, MAPINFO)


4/11

TRAINING CONTENTS

Introduction to RF Cellular GSM Features, Planning and Optimization WCDMA Features, Planning and Optimization


5/11

Tools

Network DesignDataLive Data Statistics

Live MSMeasurement

Digital Map Data

Mapinfo

TEMS

TEMS CELLPLANNER

Command Handling
http://aa.wrs.yahoo.com/_ylt=A0S0zu0Gly9O9yQA8GTNQwx.;_ylu=X3oDMTBwamcwbjI1BHBvcwM0BHNlYwNzcgR2dGlkA0kxMjFfNzI-/SIG=1g8msf9mu/EXP=1311770502/**http:/id.images.search.yahoo.com/images/view?back=http%3A%2F%2Fid.images.search.yahoo.com%2Fsearch%2Fimages%3Fp%3Dmapinfo%26ei%3DUTF-8%26fr2%3Dtab-web&w=500&h=381&imgurl=www.ccsni.com%2Fimages%2Fmapinfo.jpg&rurl=http%3A%2F%2Fwww.ccsni.com%2Fsurveying%2Ftrack_record4.htm&size=119k&name=mapinfo+jpg&p=mapinfo&oid=5b1e36ba840d984a&fr2=tab-web&no=4&tt=30562&sigr=11g7vkaic&sigi=110k5m1n3&sigb=12e145lcq&type=JPG&.crumb=ILCfC/v4Vg5http://aa.wrs.yahoo.com/_ylt=A0S0zu0Gly9O9yQA8GTNQwx.;_ylu=X3oDMTBwamcwbjI1BHBvcwM0BHNlYwNzcgR2dGlkA0kxMjFfNzI-/SIG=1g8msf9mu/EXP=1311770502/**http:/id.images.search.yahoo.com/images/view?back=http%3A%2F%2Fid.images.search.yahoo.com%2Fsearch%2Fimages%3Fp%3Dmapinfo%26ei%3DUTF-8%26fr2%3Dtab-web&w=500&h=381&imgurl=www.ccsni.com%2Fimages%2Fmapinfo.jpg&rurl=http%3A%2F%2Fwww.ccsni.com%2Fsurveying%2Ftrack_record4.htm&size=119k&name=mapinfo+jpg&p=mapinfo&oid=5b1e36ba840d984a&fr2=tab-web&no=4&tt=30562&sigr=11g7vkaic&sigi=110k5m1n3&sigb=12e145lcq&type=JPG&.crumb=ILCfC/v4Vg5


6/11

Introduction to RF Cellular Target Audience:Fresh Graduate, Drive Tester DataCollection or Junior Engineer, those want to develop and

complete themselves with excellent knowledge, Skill andCompetence for entering the world of RF engineering

Business

Training Objectives:After Completion of this training the studentwill be able with high confidence to explain about RF engineering,

major step process on planning and optimization, wireless conceptfor 2G and 3G, and what need to measure on drive test for

planning and optimization. Workshop also will be conducted

during the training to help the student improve their skill and

knowledge after theory discussion.

Workshops RF Basic Planning Based on certain requirement

(Number of Sites / Traffic / Location / Frequency)

Drop Call Analysis

Syllabus:Day 1

Introduction to RF EngineeringMultiple Access Method

(FDMA/TDMA/CDMA)

2G and 3G Comparison

2G and 3G architecture

Basic Channelization on 3G

Hard, Soft and Softer Handover

Power Control (Open and Close Loop)

Cell Reselection, Location Update procedure

Day 2Step by step RF Planning process

Antenna System Review

RF site survey and site Investigation

Coverage Vs Capacity

Wireless Concept (Rayleigh Fading, Log

Normal Fading, Time Dispersion)

Drive Test KPI

Basic Optimization

Investment:Rp. 2,000.000/student


7/11

GSM FEATURES, PLANNING AND OPTIMIZATION

PreRequisite:Has participated in the Introduction to RF Cellular training, or

Passed the Assessment Test

Target Audience: Junior RF engineer with at least 1 year experience asdrivetester, Initial tuning engineer those want to develop and complete

themselves with excellent knowledge, Skill and Competence for entering

the world of RF engineering Business as consultant

Training Objectives: After Completion of this training the student will beable with high confidence to explain about GSM Planning with manual and

planning tools include Frequency Plan. Optimization based on drill down

analysis from drive test and Statistics Measurement. GSM Basic and

importance feature. Optimization Rules and how deal with network with

small bandwidth

WorkshopsCell Planning, Frequency Plan with Planning Tools

Statistics Analysis (Identify drop cause , parameter , and top worse

cells)

Syllabus:Day 1GSM Features

Locating, Idle Mode , HCS , Intra cell

Handover, MultiBand Cell

Adaptive configuration of logical channel

Assignment to other Cell, Cell Load

Sharing

DTX, Extended Range,Power Control

Frequency Hopping

AMR , Full Rate and Half Rate

Day 2GSM planning (Nominal Cell Plan ,

Survey , System Design)

Optimization Cases ( Low Signal strength,

Interference, Handover and Call Setup

Failure)

Optimization Rules

BSIC Confusion

Maio and HSN ManagementStrategic Optimization

Day 3-4WorkshopInvestment:Rp. 3,000.000/student


8/11

WCDMA FEATURES, PLANNING AND OPTIMIZATION

PreRequisite:Has participated in the Introduction to GSM Features, Planning

and Optimization training, or Passed the Assessment Test

Target Audience: Junior RF engineer with at least 3 years experience asInitial tuning engineer those want to develop and complete themselves

with excellent knowledge, Skill and Competence for entering the world of

RF engineering Business as consultant

Training Objectives: After Completion of this training the student willbe able with high confidence to explain about WCDMA Planning with

manual and planning tools include Frequency Plan. Optimization based

on drill down analysis from drive test and Statistics Measurement.

WCDMA Basic and importance feature. Optimization Rules and how

deal with network with small bandwidth

WorkshopsCell Planning, Monte Carlo simulation with Planning Tools

Statistics Analysis (Identify drop cause, parameter, and top worse

cells)

Syllabus:Day 1

WCDMA Introduction and interfaceChannelization Code

Rake Receiver

Power Control

Soft Handover and IRAT

Load Sharing and Capacity Management

Day 2HSPA principles

WCDMA Cell Planning PrinciplesDeploying Second Carrier

Securing Coverage

Tuning Neighbor Definition

Power setting and Feature Tuning

Day 3-4Workshop

Investment:Rp. 3,500.000/student


9/11

ASSESSMENT TEST, CERTIFICATION and RESOURCE DATABASE

To ensure the objectives of the training can be achieved for all the students wewill conduct an assessment test prior to the actual training

Candidates not passing the assessment test might be:

Required to continue the self preparation and retake the test, or

Join the training as in the pre-requisite statement

After completing the training, a post-training assessment test will be given to

check on the

Training effectiveness

Training objective successful levels

As assessment of students RF skill and knowledge to match with the

available RF jobs

LLC will provide a passing certificate for all students and students data will bekept in LLC resource database for immediate needs of available

jobs/assignments


10/11

HOW TO ENROLL

CONTACTs:DERRY (085881977419, [email protected])

Lexcorp Head Office (02170883967, Jl. Prapanca Raya No. 12A,Jakarta Selatan)

Lexcorp Learning Center Office (0217662084, Jl. H. Nawi RayaNo. 10-A)

For Available Training schedule, please contact us.

Customized Training Schedule may be given for a student groups ofminimum 10.
mailto:[email protected]:[email protected]


11/11

LLC Training Syllabus

Documents

Transcript of LLC Training Syllabus