LLC « Severstal-Gonvarri-Kaluga »
description
Transcript of LLC « Severstal-Gonvarri-Kaluga »
LLC «Severstal-Gonvarri-Kaluga»
SEVERSTAL–GONVARRI–KALUGA PLANNING
First cut 23.06
First cut 18.10
First pack 19.07
GENERAL INFORMATION
Start of the project 2 quarter 2009 Put in the operation 3 quarter 2010 Investment in the non-current assets 30 million Euros Production capacity is about 170 000 tons per year Quantity of job positions: 50
LAYOUT STEEL SERVICE CENTER SGK
5
1 Blanking Line
2
Cut to length
3
Slitting Line
ITINERARY FOR FACTORY TOUR
Entry from GSK
EQUIPMENT
1 Blanking Line
1 Cut to Length Line
1 Slitting Line
BLANKING LINEIt’s a cutting line that process irregular shapes. Using a specific tool, forms can be adapted to the final shape of the part.
Technical capabilities
Input coil:
The thickness of the rolled metal: 0,6 - 3 mmCoil width: 200 - 1855 mmInternal diameter of the coil: 508 - 610 mmOuter diameter of the coil: 1000 - 2100 mm Maximum coil weight: 30 tons
Output blanks:
Maximum size of formats: 850x4000 mm The minimum size of formats : 200x200 mm
Uncoiling maximum speed 90 m/minFeeding maximum speed 120 m/minAbility to provide accuracy along the length of ± 0,1 mm
SLITTING LINETechnical capabilities
Input coil: The thickness of the rolled metal: 0,8 – 6 mm Coil width: 600 - 1850 mm Internal diameter of the coil: 508 -610 mm Outer diameter of the coil l: 900 – 2100 mm Maximum coil weight: 32 tons
Output coil:
Internal diameter: 508 -610 mmMaximum outer diameter: 2100 mmMaximum weight: 32 tonsMinimum strip width 30 mm (depending on the
thickness of rolled metal)
Maximum processing speed 300 m/min Ability to provide accuracy along the width of ± 0,5 mm
CUT TO LENGTH LINE
Technical capabilities
Input coil:
The thickness of the rolled metal: 0,5 – 3 ммCoil width: 200-1850 mm Internal diameter of the coil: 508-610 mm Outer diameter of coil: 900–2100 mm Maximum coil weight: 30 tons
Output parameters of sheets:
Maximum sheet length: 4000 mm Minimum sheet length: 200 mm Maximum weight stack: 10 tons
Maximum processing speed 90 m/minAbility to provide accuracy along the length of ± 0,5 mm