LIVESTER BF · LIVESTER BF AT A GLANCE Outstanding performances for PES fibers and their blends...
Transcript of LIVESTER BF · LIVESTER BF AT A GLANCE Outstanding performances for PES fibers and their blends...
LIVESTER BFMULTIFUNCTIONALDYEING ACCELERATORFOR PES
BOZZETTO GROUP R&D TEAMHAS DEVELOPEDA MULTIFUNCTIONAL DYEINGACCELERATOR FOR POLYESTERBASED ON A NEW POLYMER
LIVESTER BFPATENTEDIT201700029963EP18160085.9
LIVESTER BFAT A GLANCE
Outstanding performances for PES fibers and their blends dyeing with disperse dyestuff.
Free from critical chemicals of concern for human andenvironmental health. Benzoates free.
In 100% PES dyeing goods, it allows to achieve excellent exhaustion of the disperse dyestuff also attemperatures lower than 130°C, for hanks, bobbins andfor fabrics in beam and jet.
Outstanding application at boiling point (OBA):no pressure equipment needed.
Perfect for uneven shades recovery.
ODORLESS: improved workplace environment condition.
Light and wet fastness are not affected; easily removed by washing after dyeing.
Excellent dispersing power
›
›
›
›
›
›
›
›
SWELLING POWER (PES/EL)
Methodology:Treatment by exhaustionat 120°C for 35 minL.R. = 1:10;grad = 2.5°C/ min;pH 4 - 4.52% CI DISPERSE BLUE 79:1
WITHOUT PRODUCT 4% LIVESTER BF 4% TRADITIONAL CARRIER
WITHOUT PRODUCT LIVESTER BF TRADITIONAL CARRIER
L 32.10 19.11 20.05
a -4.08 1.18 0.96
b -25.24 -21.04 -20.87
C 25.57 21.07 20.89
h 260.81 273.21 272.63
CIE-LAB VALUES
WASHING FASTNESSUNI EN ISO 105C06 -C1S-
WITHOUT PRODUCT LIVESTER BF TRADITIONAL CARRIER
N/D 4/5 4
DEEPNESSWITHOUTPRODUCT
LIVESTER BF TRADITIONALCARRIER
OPTIMIZED PES DYEINGPROCESS
STANDARD PES DYEING PROCESS
BOZZETTO PES DYEING PROCESS
A: 2% CI DISPERSE BLUE 79:11.5% PERMULSIN PDE2g/l ACETIC ACID (80%)
B: 2g/l NAOH 36°BÈ4g/l SODIUM HYDROSULFITE
C: 1g/l ISOPON ACR (80%)
A: 2% CI DISPERSE BLUE 79:10.3% PERMULSIN PDE4% LIVESTER BF2g/l ACETIC ACID (80%)
B: 3% ISOPON FPS
’
35’
20’
10
10’
DISPERSING POWERMethodology: Dyeing bath (pH 4):0.2% C.I. DISPERSE BLUE 183 0.3% C.I. DISPERSE RED 159
WITHOUT PRODUCT 4% LIVESTER BF 4% TRADITIONAL CARRIER
FILTRATION AT 90°C
HIGH BIODEGRADABILITYBIODEGRADABILITY ( = BOD/COD) with NOT adopted biomass, average of4 replicas and 5 "blanks"
Test duration expressed in days. Conditions: 19°C, dark.
BOZZETTO SOLUTIONSFOR PESFIMBIL E-AS > Non-foaming, silicone-free wetting agent.
ISOPON ACR > Neutralizing/Buffering agent.
ISOPON FPS > Reducing/Dispersing agent. Specific for R.C. processesin acid conditions. It is also available in powder form (ISOPON FPS PWD).
ISOPON HFP > Desorption accelerator of unfixed dyestuff for R.C. in acid medium. Advised for PES/EL blends.
ISOPON SPO > Dispersing agent with anti-oligomer properties to be used in standard alkaline R.C.
PERINTROL FHB CONC > Crease and rope-mark inhibitor.
PERMULSIN AO 300 > Dispersing-sequestering agent withanti-oligomer properties.
PERMULSIN ELF > NSF dispersing and solubilizing agent, EXTRA LOW FORMALDEHYDE.It is also available in powder form (PERMULSIN ELF EXTRA).
PERMULSIN PDE > Levelling/dispersing agent. High yield in critical working conditions.It is also available the concentrated version (PERMULSIN PDE CONC).
ARE YOU INTERESTED IN LIVESTER BF?
CONTACT OUR GLOBAL DYEING PRODUCT MANAGER
ANDREA RIGANTINI FOR A CUSTOMIZED CONSULTING.
ANDREA WILL PROVIDE FULL ASSISTANCE FOR YOUR
SPECIFIC PRODUCTION REQUIREMENTS.
THANK YOU