TM LIVE ON-SITE & WEBCAST

AUCTIONThursday, April 19, 2007Beginning at 10:00 A.M. EDT883 East Tolna RoadShrewsbury, PA 17361 USA

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com

ALUMINUM DIE CASTING MACHINES

ZINC DIE CASTING MACHINES

TRIM PRESSES

VERTICAL MACHINING CENTERS

CNC TURNING

SHOT BLAST MACHINES

DEBURRING LINE

MACHINE SHOP

COORDINATE MEASURING MACHINES

QC & INSPECTION

ROLLING STOCK

AIR COMPRESSORS & DRYERS

BRIDGE CRANES

PALLET WRAPPER

MISCELLANEOUS

------- SODICO (Southern Die-Casters, Inc.) -------MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER

Featuring: HPM & Prince Cold Chamber Die Casting Machines from 450-Ton to 850-Ton, Techmire 66NT Zinc Machines, Extensive CNC Machining Including Chiron FZ 8W, FZ 12W VMCs & Mori-Seiki CNC Turning Centers, Shot Blast, Finishing, Complete Machine Shop & Plant Support

Chiron FZ12W & FZ08S/W High Speed Vertical Machining Centers

1998-2001 CNC

Techmire 66 NT Zinc Die Casting Machine

(2) AVAILABLE 1999

ZINC DIE CASTING MACHINES, ALUMINUM DIE CASTING MACHINES, TRIM PRESSES

— 2 —

ALUMINUM DIE CASTING MACHINESHPM MDL. II-800-A, Serial Number R00134/81-096, New 1981, Fully Factory Rebuilt (Pins, Bushings, Ways, Surface Platens, New Allen Bradley SLC 5/03, Etc.) and Updated in 2000 by HPM. Machine Is Equipped With Air Safety Ratchet, Motorized Die Height Adjustment; C-Frame Shot End Piston Bottles, and Multiplier Type Intensification, Hydraulic Ejection and Core Circuits. Machine Is Equipped With Rimrock MDL. 410 Sprayer and Rimrock 305 Auto-ladle, Striko/Westomat Dosing Furnace (New in 2004) (to Be Sold Either as a Complete Package or Separately).

Prince 800 Ton Cold Chamber Aluminum Die Cast Machine, Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 410 Sprayer and 305 Auto-ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/03 Controls.

Prince MDL. 525 CCA (450 Ton), Serial Number D-90019, New in 1990. Featuring Automatic Tie Bar Pull on Top Helper Side Tie Bar, Hydraulic Bumper Plate Ejection System Via Twin Cylinders, Prince Binary 1 Shot System, AB PLC 2/30 Controls With XY Com Interface, Inserted Shot Positions, Air Safety Ratchet, Hydraulic Motorized Die Height Adjustment, Core Circuits and Many More Features! Two (2) Machines Available!

Ex-Cell-O B&T 650 Ton Cold Chamber Die Cast Machine, Serial Number DC-7340. Featuring Motorized Die Height Adjustment, Allen Bradley SLC 5/02 Controls and Core Circuits. Machine Is Equipped With Rimrock MDL. 410 Sprayer and Rimrock 305 Auto-ladle (to Be Sold Either as a Complete Package or Separately). Special Note: This B&T Is a “Large Frame Machine” Featuring 32" of Tie Bar Clearance!

Prince 600 Ton, Serial Number D-7014, New in 1970. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 310 Sprayer and 305 Auto-Ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/04 Controls.

Kux/Wickes MDL. HP-625, Serial Number 1585, New in 1972. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits, Rimrock 310 Sprayer and 305 Auto-ladle. Machine Has Been Updated and Features Allen Bradley SLC 5/02 Controls.

HPM D-400-A, Serial Number 67-116. Equipped With: Air Safety Ratchet, Motorized Die Height, Pedestal Shot End With Intensification, Core Circuits.

HPM D-250-A, Serial Number 81001, New in 1981. Equipped With Air Safety Ratchet, Motorized Die Height Adjustment, C-Frame Shot End With Intensification, Core Circuits.

Large Selection of DME Master Unit Die Holders!

Rimrock Spare Parts (New in Box) to Be Sold Separately!

TRIM PRESSES72-Ton Greenerd Hydraulic C-Frame Trim Press, MDL. H10-25RS, S/N 1-31-73

35-Ton 4-Post Trim Press, 24" x 33" Bed, 29" Daylight

35-Ton 4-Post Trim Press, 24" x 32" Bed, 15" x 25" Posts, 30" Daylight

35-Ton 4-Post Trim Press, 24" x 30" Bed, 18" x 24" Between Posts, 16" Daylight

35-Ton 4-Post Trim Press, 20" x 29" Bed, 10" x 20" Between Posts, 30" Daylight

35-Ton 4-Post Trim Press, 24" x 33" Bed, 15" x 25" Between Posts, 30" Daylight

35-Ton Denison Multipress, MDL. LA35C92A112D15A104, 28" x 54", S/N 898128042AP20

35-Ton Dennison Multipress, MDL. LA35C92A104D13, S/N 4812P20

(2) 35-Ton Dennison Multi Press, 28" x 54" Bed

30-Ton Modern Hydraulics 4-Post Trim Press, MDL. 1R, 30" x 45" Bed, 20" x 35" Between Posts, 30" Daylight, S/N 1543

(3) Dennison Multipress

Techmire 66 NT Zinc Die Casting Machine

(2) AVAILABLE 1999

HPM II-800-A w/Striko Dosing Furnace

2000

800-TON

Prince 850-Ton Aluminum Die Casting Machine

850-TON

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com

ZINC DIE CASTING MACHINES

Techmire MDL. 66 NT, Serial Number 1999-66NTR-1105, New in

1999 - Just From Production. Two Available. This Is a Very Rare

Find; Don’t Miss out on This Opportunity to Upgrade to 66NT

Technology!

ZINC DIE CASTING MACHINES, ALUMINUM DIE CASTING MACHINES, TRIM PRESSES

— 3 —

B&T 28-Ton Rapid PressXLO B&T 50-Ton Trim Press

Rimrock ControlsTilting Furnace

HPM D-250-A, C-Frame Shot, Hyd. Ejection

Lester 250-Ton Hot Chamber

Prince 800-Ton Aluminum Die Casting Machine w/Rimrock 410 & 305 Auto Ladle

800-TON

Kux-Wickes HP-600 w/Rimrock Ladle & Sprayer

600-TON

HPM D-400-A Aluminum Die Casting Machine

400-TON

Prince 525 CCA 450-Ton Aluminum Die Casting Machine

450-TON 1991

(2) AVAILABLE

Can't make it to the auction in person? Bid live online at www.BIDITUP.com

VERTICAL MACHINING CENTERS

— 4 —

DIRECTIONSFrom Harrisburg International Airport MDT, Harrisburg, PA: (approximately 46 miles from site)Start going toward the airport exit on Harrisburg International Airport. Turn left on Airport Dr. Airport Dr. becomes White House Ln. Turn left on 2nd St. [PA-230]. Turn right on Eisenhower Blvd. Take ramp onto I-283. Take ramp onto I-76. Take Exit #242/PA-83 onto I-83 toward York Baltimore/Harrisburg. Take Exit #4/PA-851 toward Shrewsbury. Turn left on E. Forrest Ave. [PA-851]. Turn right on T582. Turn right on E. Tolna Rd. Arrive at 883 E. Tolna Rd. and look for auction signs.

Hampton Inn (1 mile from site)1000 Far Hills Dr.New Freedom, PA717-235-9898

Country Inn & Suites By Carlson York(13 miles from site)245 St. Charles WayYork, PA717-747-5833

Holiday Inn Express(13 miles from site)140 Leader Heights Rd.York, PA717-741-1000

LODGING

Chiron FZ12W High Speed Vertical Machining Center

1998–2000 CNC

(4) AVAILABLE

Excel PMC-5T18 & Enshu DTLC Vertical Machining Centers

1992 & 98 CNC

Chiron FZ08S/W Vertical Machining Center

CNC2001

VERTICAL MACHINING CENTERS2000 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant Thru Spindle, Mist Collector, Knoll Chip Conveyor, Manuals, GE Fanuc Series 21i-M Control, S/N 141-62

2000 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer , Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 141-57

1999 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 141-28

1998 Chiron High Speed Vertical Machining Center, MDL. FZ12W, (2) 26" x 13.8" Work Areas, 21" X-Axis, 12" Y-Axis, 16" Z-Axis, 10,500 RPM, 12-ATC High Speed Basket Type Tool Changer, Coolant Thru Spindle, Mist Collector, Knoll Chip Conveyor, Manuals, GE Fanuc Series 21-M Control, S/N 469-78

2001 Chiron High Speed Vertical Machining Center, MDL. FZ08S/W, (2) 21.7" x 11.8" Work Areas, 12" X-Axis, 10" Y-Axis, 11.4" Z-Axis, 15,000 RPM, 24-ATC Magazone Type Tool Changer, Knoll Chip Conveyor, Coolant, Manuals, GE Fanuc Series 21-M Control, S/N 204-56

1998 Excel Vertical Machining Center, MDL. PMC-5T18, 17" x 27" Table, 20" X-Axis, 16" Y-Axis, 18" Z-Axis, 8,000 RPM, 7.5 HP, BT40 Taper, 18-ATC, Coolant, Fanuc Series 21-M Control, S/N 5S5T1218

1992 Enshu Vertical Machining Center, MDL. DTCL, 15 3⁄4" x 27 1⁄2" Table, 219.7" X-Axis, 15.7" y-Axis, 11.8" Z-Axis, 10,000 RPM, 30-Taper, 16-ATC, Coolant, Fanuc Series O-M Control, S/N 233

*LARGE QUANTITY OF CNC TOOLING

FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATIONCALL 818-508-7034

CNC TURNING, DEBURRING LINE

— 5 —

CNC TURNING 1998 Okuma CNC Lathe, MDL. LB10 II, 19" Swing Over Bed, 13.39" Over Carriage, 5.9" X-Axis, 13.79" Z-Axis, 6.69" Max Turning Diameter, 6,000 RPM, 12-Station Turret, Tail Stock, Enomoto Chip Conveyor, Okuma OSP U10L Control, S/N 0312

1998 Okuma CNC Lathe, MDL. LB10 II, 19" Swing Over Bed, 13.39" Over Carriage, 5.9" X-Axis, 13.79" Z-Axis, 6.69" Max Turning Diameter, 6,000 RPM, 12-Station Turret, Tail Stock, Enomoto Chip Conveyor, Okuma OSP700L Control, S/N 0113

1997 Okuma CNC Lathe, MDL. LNC8, 15 3⁄4" Swing, 6 3⁄4" X-Axis, 15.75" Z-Axis, 9" Turning Diameter, 15" Turning Length, 12-Station Turret, Okuma CNC Control, S/N D524

1993 Hardinge CNC Lathe, MDL CHNCI, 6" Swing Over Table, 6" X-Axis, 12" Z-Axis, 6" Turning Diameter, 4,000 RPM, GE Fanuc Series O-T Control, S/N CN-4675-T-C

(2) Mori Seiki NC Lathe, MDL. SL-OH, 7 1⁄2" Swing, 4.92" X-Axis, 7.86" Z-Axis, 8.3" Turning Diameter, 16 1⁄2" Max Turning Length, 8-Station Turret, Yasnac Control, S/N 1137, 1143

DEBURRING LINEAlmco Vibratory Deburring System, 48" Diameter Vibratory Deburring Mill Feeds to a 22" Wide Shaker Conveyor, Parts then flow to an Incline Conveyor System to Parts Delivery Hopper, Includes 32" Diameter Offline Vibratory Deburring Mill, Almco System Controls

Almco Deburring Line

LEASE/FINANCINGAVAILABLE

DIRECT FROM

BIDITUP Capital

Corporation

Mori Seiki SL-OH

Hardinge CHNCI CNC Lathe

CNC

1993

Okuma LNC8 CNC Lathe

CNC

1997

Okuma LB10 II CNC Lathe

CNC

(2) AVAILABLE 1998

Register at www.BIDITUP.com and receive auction updates via email.

SHOT BLAST MACHINES, MACHINE SHOP

— 6 —

SHOT BLAST MACHINESPangborn Roto Blast Shot Blast Machine, MDL. GN Rotoblast Barrel, 36" Wide Blast Chamber, Dust Collector, S/N 6GNR-63401

Pangborn Shot Blast Machine, MDL. GN, 36" Wide Blast Chamber, S/N 6GN-6R/S-880793

Wheelabrator Shot Blast Machine, MDL. 170, S/N 170084

MACHINE SHOPKingston Engine Lathe, MDL. HJ-1700, 12" x 88" Bed, 16" Swing x 70" Centers, 10" 3-Jaw Chuck, 2 1/2" Capacity, Tool Post

Cadillac Engine Lathe, MDL. 1428G, 11" x 44" Bed, 14" Swing x 28" Centers, 8" 3-Jaw Chuck, 1 5/8" Capacity, Tool Post

Hardinge Tool Room Lathe, 3 1/2" x 30" Dovetail Bed, 9" Swing x 20" Centers, 1 1/8" Collet Closure

Hardinge Tool Room Lathe, 6 3/4" x 36" Dovetail Bed, 11" Swing x 22" Centers, 1 1/4" Collet Closure

(3) McLean Bench Top NC Lathe, Coolant, McLean Control, Manuals

Lagun FTV-25 Vertical Mill, 10" x 50" T-Slotted Power Feed Table, 4,200 RPM VS, 2-Axis DRO

Bridgeport Series II Vertical Mill, 9" x 48" T-Slotted Power Feed Table, 2 HP, 4,200 RPM VS, Topaz 2-Axis DRO, S/N 249585

Bridgeport Vertical Mill, 9" x 42" T-Slotted Power Feed Table, 1 1/2 HP, 4200 RPM VS, 2-Axis DRO

Bridgeport Vertical Mill, 9"x 36" T-Slotted Table, 3 HP, S/N 36208

2002 Ipsco International Pin Cutoff and Grind Machine, MDL. PCO-2, S/N 00143

Richmond Radial Drill, MDL. SR2, 8" Diameter Column x 4' Arm, 24" x 36" Table, 100–1,500 RPM

RMT Radial Drill Press, MDL. Commander, 24" x 40" T-Slotted Table, Tooling, Coolant, Manuals

Amada-Wasino 8" x 20" Hydraulic Surface Grinder, MDL. SG-52A, 8" Wheel, S/N 11-012

Harig 6" x 18" Hydraulic Surface Grinder, MDL. 618W, 8" Grind Wheel, Dust Collector

Clausing 6" x 12" Hydraulic Surface Grinder, 8" Wheel

Brown & Sharpe 5" x 10" Hydraulic Surface Grinder

Ex-Cell-O RAM Type EDM, 5 1/2" x 10" Magnetic Chuck, Coolant

Wellsaw Horizontal Band Saw, MDL. 600, S/N 12035

Ridgid 535 Pipe Threader; Barker Horizontal Mill, MDL. PMD; (5) Burr King 2" Vertical Belt Grinder, MDL. 760; (2) Porter Cable 6" Vertical Belt Grinder; Jackson Horizontal and Vertical Head Index Drilling Table; Ettco Auto Lead Screw Tapper, MDL. ATV-5; Syncro Tapper, with 4-Station Rotary Table and Coolant; Ettco ATV-3 Multihead Tapper; Procunier Lead Screw Tapper; Dumore Horizontal Tapper; Syncro Tapper; Misc Tapping Machines; Dennison Bench Top Multipress; Atlas Bench Top Drill Press, MDL. 1421, 21" Swing; Powermatic 20" Floor Type Drill Press; Delta 16" Floor Type Drill Press; 16" Bench Top Drill Press; Orbit 12" Floor Type Drill Press; (2) Padflex 1000 Pad Printer, with Autoroll Digital Control; 5' x 4' Welding Table; Baldor Double End Pedestal Grinders, 1/2 HP; Tooling for Boring, Milling and Drilling; Chucks, Machining Vises; 12" Rotary Tables

Pangborn GN Rotoblast Pangborn GN Rotoblast

Wheelabrator 170 Barrel Blast Area

Cadillac Engine Lathe Ex-Cell-O EDM

Kingston Engine Lathe Ipsco PCO-2

2002

36"

TO SCHEDULE AN AUCTION OR APPRAISALCALL 818-508-7034

SHOT BLAST MACHINES, MACHINE SHOP

— 7 —

Hydraulic Surface Grinders Lagun & Bridgeport Vertical Mills

Radial Arm Drill RMT Radial Drill Press Bridgeport Vertical Mill Multi-Head Tapper Enco Tapper

Drill Presses 6" Belt Grinder Burr King Belt Grinders Tapper Padflex 1000 Pad Printer

Bench Top NC LatheRidgid Pipe ThreaderArbor PressesWells Horizontal Band SawDrill Bench

Can't make it to the auction in person? Bid live online at www.BIDITUP.com

COORDINATE MEASURING MACHINES, QC & INSPECTION, ROLLING STOCK

— 8 —

COORDINATE MEASURING MACHINESGiddings & Lewis Cordax CMM, MDL. Discovery D-8, 22" x 26" Table, Renishaw TP1S Probe & PC Control, Remote Control Unit, S/N 04270799

Sheffield Cordax CMM, MDL. 1805MEA, 20" x 44" Table, Sheffield Measurement Processor, Renishaw TP6 Probe, S/N C-6122-0390

QC & INSPECTIONJ & L Metrology EPIC 30E 30" Optical Comparator, 8 “x 32" Table, Quadra-Chek 3000 Control

Deltronic 14" Bench Top, Optical Comparator, Quadrachek 2000 DRO

Wilson Hardness Tester

Setra Digital Scales

Granite Surface Plates

Pin Gauges; Plug Gauges; Digital Indicators; Digital Height Gauges; Microscopes; Calipers; Pratt & Whitney Super Micrometer; Thread Gauges; Torque Gauges; Calibration Kits

ROLLING STOCKCaterpillar LPG Forklift, MDL. GC15, 3,000 LB, Side Shift, Hard Tires, Triple Mast, S/N ZEM01050

Toyota LPG Forklift, MDL. 5F-GC10, 1,800 LB x 130", Hard Tires, Side Shift, Double Mast, S/N 11640

Schaaeff Stand-Up Forklift, MDL. E3000YE, 3,000 LB x 152", S/N 30-1594

Genie Manlift, MDL. 2-30/20HD, 500 LB Max Load, Air Tires, S/N 30-87-1612

Jones & Lamson 30" Epic 30E Optical Comparator

Inspection Sample Inspection

Toyota ForkliftCaterpillar Forklift

Genie Manlift Stand-Up Forklift

Bausch & Lomb & Sheffield Coordinate Measuring Machines

Can’t make it to the auctionin person? Bid live online at

www.BIDITUP.com

WEB

CA

ST

30"

BIDITUP AUCTIONS & APPRAISALS WORLDWIDEwww.BIDITUP.com

COORDINATE MEASURING MACHINES, QC & INSPECTION, ROLLING STOCK

— 9 —

Ingersoll-Rand TMS0780 Dryer

Lantech Pallet Wrappers CNC Tooling

Pallet Racking

Dust Collector View of Trim Presses & Support Large Qty. Aluminum

Sullair 125 HP Compressor

125 HP 2004

Sullair 50 HP Compressor

50 HP

Quincy 25 HP Skid Mounted Compressors

25 HP

Acco 5-Ton Bridge Crane

5-TON

Acco 4-Ton Bridge Crane

4-TON

FOR LEASE & FINANCE SERVICES - BIDITUP CAPITAL CORPORATION CALL 818-508-7034

AIR COMPRESSORS & DRYERS, BRIDGE CRANES, PALLET WRAPPER, MISCELLANEOUS

— 10 —

TO SCHEDULE AN AUCTION OR APPRAISALCALL 818-508-7034

AIR COMPRESSORS & DRYERSSullair 125 HP Air Compressor, MDL. 20-125

2004 Ingersoll-Rand Air Dryer, MDL. TMS0780, S/N TMS0780-0402/3079

Sullair 50 HP Air Compressor, MDSL. 20-50

(2) Quincy 25 HP Skid Mounted Air Compressors

5 HP Air Compressor

BRIDGE CRANESAcco 5-Ton Underhung Bridge Crane, Yale Hoist, 20' Span x 150' Run, Remote Control

Acco 4-Ton Underhung Bridge Crane, 25' Span x 50' Run, Pendant Control

PALLET WRAPPERLantech 48" Pallet Wrapper, 88" Wrap Height, Digital Control

MISCELLANEOUS4-Compartment Dust Collector; Hobart Beta MIG 250 Welder; Thermal Arc Pak 5XT Plasma Cutter; Large Quantity of Drilling & Boring Tooling; Huot Tooling Storage Cabinets; Pallet Racking; (100’s) Wire Baskets; (100’s) Steel Parts Bins; Dump Hoppers; Barrels; Rig-Off Hydraulic Die Lift Cart; Presto Die Lift Cart; Trailer; Tool Chests; Clamps; Vises; Aluminum Ladders; Tool Boxes; Hand Tools; Large Qty Boring and Milling Tooling; Dake Arbor Presses; Floor Scales; Multiple Tool Crib & Storage Systems; Tube Stock; Wire Spools; Hose Spools; Fittings; Elbows; Tees; Connectors; Plastic Tubs & Totes; Lockers; Fans; Chairs; Tables; Microwaves; Refrigerators; Large Quantity of High End Office Equipment and Furniture

Portable Welder Pressure Washer

Pedestal Grinders Aluminum Stock

Ladles Serta Digital Scales

Tooling Tooling

Wire Baskets Metal BinsH-Frame PressToolboxes

LEASE/FINANCINGAVAILABLE DIRECT FROM BIDITUP Capital Corporation

LARGE QUANTITY

AIR COMPRESSORS & DRYERS, BRIDGE CRANES, PALLET WRAPPER, MISCELLANEOUS

— 11 —

Trailer

Office Furniture

Monitors

PC Equipment

Copiers & Faxes

Office Furniture Office Furniture

Office Furniture Office Furniture Parts Rolloff Stands

Dump Hoppers

LARGE QUANTITY

REAL ESTATE FOR SALE OR LEASE

883 E. Tolna Road

Shrewsbury, PA 17361

County: York

Total Space: 57,768 SF

Lot Size: 3.26 Acres

Year Built: 1974

Space Type: Manufacturing

Heavy Power and Large Natural Gas Service

Ample Parking

3 High Dock Doors

1 Grade Level Door

CONTACT RUSS BARDOLF AT 717-854-5357

FOR MORE INFORMATION

Register at www.BIDITUP.com and receive auction updates via email.

TM

LIVEON-SITE &WEBCAST

MACHINERY AUCTION APRIL 19, 2007

--------- SODICO (Southern Die-Casters, Inc.) ---------MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER

Featuring: HPM & Prince Cold Chamber Die Casting Machines from 450-Ton to 850-Ton, Techmire 66NT Zinc Machines, Extensive CNC Machining Including Chiron FZ 8W, FZ 12W VMCs &

Mori-Seiki CNC Turning Centers, Shot Blast, Finishing, Complete Machine Shop & Plant Support

FOR THE COMPLETE TERMS & CONDITIONS OF THIS AUCTIONPlease visit our website — www.BIDITUP.com and click on Sodico

NOW OFFERING IN-HOUSE FINANCING & LEASING. Call 818.508.7034

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

TM MACHINERY AUCTION, LOOK INSIDE!

ATTENTION: PLANT MANAGER OR EQUIPMENT

BUYER

11426 Ventura BoulevardStudio City, California 91604Phone: 818.508.7034Fax: 818.508.3025info@biditup.com

Koster Industries Inc., PA License #AY-000096-LFrank J. Sangiorgi, PA License #AU005093

IP-7209377

AUCTIONThursday, April 19, 2007Beginning at 10:00 A.M. EDT

PREVIEWWednesday, April 18, 20079:00 A.M. to 4:00 P.M. EDT

LOCATION883 East Tolna RoadShrewsbury, Pennsylvania 17361

See page 4 for directions & lodging

WEBCASTCan’t attend the auction in person? You can participate and bid in real time via the Internet. Preview assets with detailed digital photos, lot catalogs, and in-depth descriptions.

For more information, visit www.BIDITUP.comPlease note, all webcast participants must submit a

FEATURED AUCTIONThursday, April 19, 2007

Shrewsbury, Pennsylvania

SODICO(Southern Die-Casters, Inc.)

MAJOR EAST COAST ALUMINUM & ZINC DIE CASTER

For a Complete Listing of Upcoming Auctions, Visit www.BIDITUP.com

Register Online and Receive Auction Updates & Information via E-mail.

25% deposit and signed registration forms no later than 24 hours before a sale.

Chiron FZ12W & FZ08S/W High Speed Vertical Machining Centers HPM II-800-A w/Striko Dosing Furnace