Liste de publications de BATir-SMC Bouillard, P., … based on a triangular piezoelectric patch. ......

-

12-03-2013 /45

Liste de publications de BATir-SMC

Ouvrages publiés en collaboration (6)

20101. Deraemaeker, A., & Worden, K. (2010). New trends in vibration based structural health

monitoring. Springer.

2. Breitkopf, P., & Filomeno Coelho, R. (2010). Multidisciplinary Design Optimization inComputational Mechanics. ISTE/John Wiley and Sons.

20093. Filomeno Coelho, R., & Breitkopf, P. (2009). Optimisation multidisciplinaire en mécanique.

Hermès Science Publications / Lavoisier.

4. Bouillard, P., & Diez, P. (2009). Adaptive modeling and simulation. Barcelona: CIMNE.

20085. Bouillard, P., Rammer, Y., & Vantomme, J. (2008). Structural design of constructions

subjected to exceptional or accidental actions. Bruxelles: Presses universitaires deBruxelles.

20056. Bouillard, P., & Lemaire, J. C. (2005). L'apprentissage des sciences en question(s).

Bruxelles: Espace de Libertés.

Ouvrages édités à titre de seul éditeur ou en collaboration (2)

20127. Raman, S., Bouillard, P., & Deraemaeker, A. (2012, juillet 09). XFEM approach for the

modeling of strain discontinuities in beams due to piezoelectric actuation mechanisms.

8. Raman, S., Tondreau, G., & Deraemaeker, A. (2012, juin 18). Design of a point loadactuator based on a triangular piezoelectric patch.

https://dipot.ulb.ac.be/dspace/bitstream/2013/126660/1/129.pdf

Parties d'ouvrages collectifs (15)

Soumis pour publication9. Richardson, J. N., Filomeno Coelho, R., Bouillard, P., & Adriaenssens, S. (2012). Grid

Shell Topology Optimization: Design of Steel Grid Shell Canopies. In Form Finding andOptimization of Shell Structures.

2013

-

12-03-2013 /45

10. Descamps, B., & Filomeno Coelho, R. (2013). Graph theory in evolutionary truss designoptimization. In Metaheuristic Applications in Structures and Infrastructures (pp. 241-268).Elsevier B.V.

201011. Deraemaeker, A. (2010). Vibration based structural health monitorin using large sensor

arrays: overview of instrumentation and feature extraction based on model filters. In CISMLecture Notes Vol 520. Springer.

12. Filomeno Coelho, R., Xiao, M., Breitkopf, P., Knopf-Lenoir, C., Villon, P., & Sidorkiewicz,M. (2010). Reduced-order Models for Coupled Problems. In P. Breitkopf & R. FilomenoCoelho (Eds.), Multidisciplinary Design Optimization in Computational Mechanics (pp.119-197). ISTE/John Wiley and Sons.

13. Massart, T., Kouznetsova, V., Peerlings, R., & Geers, M. (2010). ComputationalHomogenization for Localization and Damage. In V. Kouznetsova, M. Vaz Junio, E. deSouza Neto, & P. Munoz-Rojas (Eds.), Advanced Computational Material Modeling: FromClassical to Multi-Scale Techniques (pp. 111-164). Wiley.

200914. Filomeno Coelho, R., Breitkopf, P., Knopf-Lenoir, C., & Villon, P. (2009). Optimisation

de problèmes couplés avec modèles réduits. In R. Filomeno Coelho & P. Breitkopf(Eds.), Optimisation multidisciplinaire en mécanique (pp. 123-175). Hermès SciencePublications / Lavoisier.

200815. Bouillard, P., Menchel, K., Santafé, B., & Massart, T. (2008). Progressive collapse

simulation techniques for RC structures. In P. Bouillard, Y. Rammer, & J. Vantomme(Eds.), Structural Design of Constructions subjected to exceptional or accidental actions(pp. 92-114). Bruxelles: Presses universitaires de Bruxelles.

200616. Massart, T., Peerlings, R., Geers, M., & Bouillard, P. (2006). A multi-scale computational

approach for the fracture behaviour of quasi-brittle materials. In B. Topping (Ed.),Innovation in computational structures technology (pp. 303-324). Stirlingshire, Scotland:Saxe-Coburg Publications.

200517. Bouillard, P., Mertens, T., Hazard, L., & Villon, P. (2005). Les méthodes numériques

alternatives pour la simulation de la propagation des ondes à moyennes fréquences. In P.Breitkopf (Ed.), La méthode des éléments finis: extensions et alternatives (pp. 349-382).Paris: Lavoisier.

200418. Filomeno Coelho, R., Bouillard, P., & Bersini, H. (2004). PAMUC - A new method to

handle with constraints and multiobjectivity in evolutionary algorithms. In A. Osyczka &T. Burczynski (Eds.), IUTAM Symposium on Evolutionary Methods in Mechanics (pp.91-100). Kluwer Academic Publishers, Dordrecht.

19. Bouillard, P., Mertens, T., & Massart, T. (2004). Numerical modeling of wave propagationin the medium frequency range: overview and trends. In B. Topping & C. Mota Soares

-

12-03-2013 /45

(Eds.), Progress in Computational Structures Technology (pp. 59-76). Saxe-CoburgPublications.

200320. Deraemaeker, A., & Ladevèze, P. (2003). CRE Model Updating method in structural

dynamics with uncertain measurements. In Inverse Problems in Engineering Mechanics.Elsevier, Tanaka-Dulikravich edition.

200021. Deraemaeker, A., Ladevèze, P., Collard, E., & Leconte, P. (2000). Identification of damped

joints parameters using the error in the constitutive relation. In Inverse Problems inEngineering. Elsevier, Tanaka-Dulikravich edition.

199822. Bouillard, P., & Ihlenburg, F. (1998). Error estimation and adaptivity for the finite

element solution in acoustics. In P. Ladevèze & J. T. Oden (Eds.), Advances in AdaptiveComputational Methods in Mechanics (pp. 477-492). Elsevier.

199623. Notay, Y., Saint-Georges, P., & Warzée, G. (1996). Fast iterative solvers for finite element

analysis in general and shell analysis in particular. In B. Topping (Ed.), Advances in FiniteElement Technology (pp. 273-282). Edinburgh: Civil-Comp Press.

Articles dans des revues avec comité de lecture (108)

Soumis pour publication24. Filomeno Coelho, R. (2012). Metamodels for mixed variables based on moving least

squares - Application to the multi-objective optimization of rigid frames. Optimization andEngineering.

25. Guenot, M., Lepot, I. I., Sainvitu, C. C., Goblet, J., & Filomeno Coelho, R. (2012). Adaptivesampling strategies for non-intrusive POD-based surrogates. Engineering computations.

26. Descamps, B., & Filomeno Coelho, R. (2012). A lower-bound formulation for the geometryand topology optimization of truss structures under multiple loading. Structural andmultidisciplinary optimization.

27. Xiao, M., Filomeno Coelho, R., Breitkopf, P., Knopf-Lenoir, C., Villon, P., & Zhang, W.H. (2012). Constrained proper orthogonal decomposition based on QR-factorization foraerodynamical shape optimization. Applied mathematics and computation.

28. Menchel, K., Massart, T., & Bouillard, P. (2009). A new pushover analysis procedurefor structural progressive collapse based on an optimised load amplification factors.Computers & structures.

29. Massart, T., & Selvadurai, P. A. (s.d.). Computational analysis of dilatancy-inducedpermeability evolution in degrading geomaterials. International journal of rock mechanicsand mining sciences.

-

12-03-2013 /45

30. Chettah, A., Mercatoris, B., Sacco, E., & Massart, T. (s.d.). Localisation analysis inmasonry using Transformation Field Analysis. Engineering fracture mechanics.

Accepté pour publication31. Richardson, J., Nordensen, G., Laberenne, R., Filomeno Coelho, R., Bouillard, P., &

Adriaenssens, S. (2013). Flexible optimal design of a bracing system for façade designusing multiobjective genetic algorithms. Automation in construction.

32. Richardson, J., Adriaenssens, S., Bouillard, P., & Filomeno Coelho, R. (2013). Symmetryand asymmetry of solutions in discrete and continuous structural topology optimization.Structural and multidisciplinary optimization.

33. Lebon, J., Le Quilliec, G., Breitkopf, P., Filomeno Coelho, R., & Villon, P. (2013). A two-pronged approach for springback variability assessment using sparse polynomial chaosexpansion and multi-level simulations. International Journal of Material Forming.

201334. Filomeno Coelho, R. (2013). Co-evolutionary optimization for multi-objective design under

uncertainty. Journal of mechanical design, 135(2), 021006.

201235. Mercatoris, B., & Massart, T. (2012, décembre 07). Energy consistency in

homogenisation-based upscaling scheme for localisation in masonry shells. Internationaljournal of fracture, 178, 259-279.

36. Massart, T., & Selvadurai, P. A. (2012, juillet 20). Stress-Induced Permeability Evolutionin a Quasi-Brittle Geomaterial. Journal of Geophysical Research: Solid Earth, 117, 07207.doi:doi:10.1029/2012JB009251

37. Pardoen, T., & Massart, T. (2012, mai 14). Interface controlled plastic flow modeled bystrain gradient plasticity theory. Comptes rendus. Mécanique, 340(4-5), 247-260. doi:http://dx.doi.org/10.1016/j.crme.2012.02.008

38. Piezel, B., Mercatoris, B., Trabelsi, W., Laiarinandrasana, L., Thionnet, A., & Massart, T.(2012, mai 09). Bending effect on the risk for delamination at the reinforcement/matrixinterface of 3D woven fabric composite using a shell-like RVE. Composite structures, 94,2343-2357. doi:http://dx.doi.org.ezproxy.ulb.ac.be/10.1016/j.compstruct.2012.03

39. Sonon, B., Francois, B., & Massart, T. (2012, mars 28). A unified level set basedmethodology for fast generation of complex microstructural multi-phase RVEs. Computermethods in applied mechanics and engineering, 223-224, 103-122.

40. Dumoulin, C., Karaiskos, G., Carette, J., Staquet, S., & Deraemaeker, A. (2012, mars21). Monitoring of the ultrasonic P-wave velocity in early-age concrete with embeddedpiezoelectric transducers. Smart materials and structures, 21.

41. Berke, P., & Massart, T. (2012, mars). Slip rate dependent friction as a potentialcontribution to displacement bursts in nanoindentation of Nickel. Tribology international,47, 167-174. doi:http://dx.doi.org/10.1016/j.triboint.2011.10.020

-

12-03-2013 /45

42. Richardson, J. N., Adriaenssens, S., Bouillard, P., & Filomeno Coelho, R. (2012).Multiobjective topology optimization of truss structures with kinematic stability repair.Structural and multidisciplinary optimization. doi:10.1007/s00158-012-0777-5

https://dipot.ulb.ac.be/dspace/bitstream/2013/110164/1/RICHARDSON_ET_AL_SMO_2011.pdf

43. Richardson, J. N., Adriaenssens, S., Filomeno Coelho, R., & Bouillard, P. (2012). Coupledform finding and grid optimization approach for single layer grid shells. Engineeringstructures.

201144. Massart, T., Mercatoris, B., Berke, P., Piezel, B., Laiarinandrasana, L., & Thionnet, A.

(2011, décembre 31). Multi-scale modelling of heterogeneous shells structures. ComputerAssisted Mechanics and Engineering Sciences, 18, 53-71.

45. Santafe Iribarren, B., Berke, P., Bouillard, P., Vantomme, J., & Massart, T. (2011, octobre01). Investigation of the influence of design and material parameters in the progressivecollapse analysis of RC structures. Engineering structures, 33(10), 2805-2820. doi:http://dx.doi.org/10.1016/j.engstruct.2011.06.005

46. Menchel, K., Massart, T., & Bouillard, P. (2011, août). Identification of progressive collapsepushover loads based on a kinetic energy criterion. Structural Engineering and Mechanics,39(3), 427-447.

47. Deraemaeker, A., Tondreau, G., & Bourgeois, F. (2011). Equivalent loads for two-dimensional distributed anisotropic piezoelectric tranducers with arbitrary shapes attachedto thin plate structures. <The >Journal of the Acoustical Society of America, 129(2),681-690.

48. Descamps, B., Filomeno Coelho, R., Ney, L., & Bouillard, P. (2011). Multicriteriaoptimization of lightweight bridge structures with a constrained force density method.Computers & structures, 89, 277-284. doi:10.1016/j.compstruc.2010.11.010

49. Filomeno Coelho, R., Lebon, J., & Bouillard, P. (2011). Hierarchical stochasticmetamodels based on moving least squares and polynomial chaos expansion -Application to the multiobjective reliability-based optimization of 3D truss structures.Structural and multidisciplinary optimization,(43), 707-729.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91660/1/RFC_ET_AL_SMO_2010.pdf

50. Filomeno Coelho, R., & Bouillard, P. (2011). Multiobjective reliability-based optimizationwith stochastic metamodels. Evolutionary computation, 19(4), 525-560. doi:10.1162/EVCO_a_00034

https://dipot.ulb.ac.be/dspace/bitstream/2013/91661/1/RFC_EC_2010.pdf

51. Xiao, M., Breitkopf, P., Filomeno Coelho, R., Knopf-Lenoir, C., & Villon, P. (2011).Enhanced POD projection basis with application to shape optimization of car engine intakeport. Structural and multidisciplinary optimization. doi:10.1007/s00158-011-0757-1

https://dipot.ulb.ac.be/dspace/bitstream/2013/110021/1/XIAO_ET_AL_2011.pdf

-

12-03-2013 /45

52. Mercatoris, B., & Massart, T. (2011). A coupled two-scale computational scheme forthe failure of periodic quasi-brittle thin planar shells and its application to masonry.International journal for numerical methods in engineering.

201053. Deraemaeker, A., Preumont, A., Reynders, E., De Roeck, G., Kullaa, J., Lamsa, V.,

Worden, K., Manson, G., Barthorpe, R., Papatheou, E., Kudela, P., Ostachowicz, W.,Malinowski, P., & Wandowski, T. (2010). Vibration-based structural health monitoringusing large sensor networks. Smart Structures and Systems, 6(3).

54. Deraemaeker, A., & Nasser, H. (2010). Numerical evaluation of the equivalent propertiesof Macro Fiber Composite (MFC) transducers using periodic homogenization. Internationaljournal of solids and structures, 47, 3272-3285.

55. Xiao, M., Breitkopf, P., Filomeno Coelho, R., Knopf-Lenoir, C., Sidorkiewicz, M., & Villon,P. (2010). Model reduction by CPOD and Kriging - Application to the shape optimization ofan intake port. Structural and multidisciplinary optimization,(41), 555-574.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91663/1/XIAO_ET_AL_2009.pdf

56. Berke, P., El Houdaigui, F., & Massart, T. (2010). Coupled friction and roughness surfaceeffects in shallow depth spherical nano-indentation. Wear, 268, 223-232. doi:10.1016/j.wear.2009.07.015

https://dipot.ulb.ac.be/dspace/bitstream/2013/66513/1/Elsevier_43406.pdf

57. Massart, T., & Pardoen, D. (2010). Strain gradient plasticity analysis of the grain sizedependent strength and ductility of polycrystals with evolving grain boundary confinement.Acta materialia, 58, 5768-5781.

58. Brugger, C., Coulombier, M., Massart, T., Raksin, J., & Pardoen, T. (2010). Strain gradientplasticity analysis of the strength and ductility of thin metallic films using an enrichedinterface model. Acta materialia, 58, 4940-4949.

59. Mazzoni, L., Pardoen, T., & Massart, T. (2010). Analysis of size effects associated to thetransformation strain in TRIP steels with strain gradient plasticity. European journal ofmechanics. A, Solids, 29, 132-142. doi:10.1016/j.euromechsol.2009.08.001


60. Postiaux, N., Bouillard, P., & Romainville, M. (2010). Référentiels de compétences etpilotage de formation à l'université: usages, rôles et limites. Recherche et formation, 64,15-30.

200961. De Marneffe, B., Preumont, A., Avraam, M. T., Deraemaeker, A., & Horodinca, M. (2009).

Vibration Isolation of Precision Payloads: A Six-axis Electromagnetic Relaxation Isolator.Journal of guidance, control, and dynamics, 32(2), 395-401.

62. Deraemaeker, A., Nasser, H., Benjeddou, A., & Preumont, A. (2009). Mixing rules for thepiezoelectric properties of Macro Fiber Composites. Journal of intelligent material systemsand structures, 20(12), 1391--1518. doi:10.1177/1045389X09335615

-

12-03-2013 /45

https://dipot.ulb.ac.be/dspace/bitstream/2013/62720/1/paper_v2.pdf

63. Filomeno Coelho, R., Breitkopf, P., Knopf-Lenoir, C., & Villon, P. (2009). Bi-level modelreduction for coupled problems - Application to a 3D wing. Structural and multidisciplinaryoptimization,(39), 401-418.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91664/1/RFC_SMO_2009.pdf

64. Menchel, K., Massart, T., Rammer, Y., & Bouillard, P. (2009). Comparison and studyof different progressive collapse simulation techniques for RC structures. Journal ofStructural Engineering, 135(6), 685-697. doi:10.1061/(ASCE)0733-9445(2009)135:6(685)

65. Mercatoris, B., & Massart, T. (2009). Assessment of periodic homogenisation-basedmultiscale computational schemes for quasi-brittle structural failure. International journal ofmultiscale computational engineering, 7(2), 153-170.

66. Mercatoris, B., Massart, T., & Bouillard, P. (2009). Multi-scale detection of failure in planarmasonry thin shells using computational homogenisation. Engineering fracture mechanics,76(4), 479-499. doi:10.1016/j.engfracmech.2008.10.003


67. Berke, P., Tam, E., Delplancke, M.-P., & Massart, T. (2009). Study of the rate dependentbehaviour of pure Nickel in conical indentation through numerical simulation coupled toexperiments. Mechanics of materials, 41(2), 154-164.

200868. Preumont, A., De Marneffe, B., Rodrigues, G., Nasser, H., & Deraemaeker, A. (2008).

Dynamics and control in precision mechanics. Revue Europeenne de MecaniqueNumerique, 17(5-7), 597-611.

69. Deraemaeker, A., Reynders, E., De Roeck, G., & Kullaa, J. (2008). Vibration-basedstructural health monitoring using output-only measurements under changing environment.Mechanical systems and signal processing, 22, 34-56.

70. Nasser, H., Deraemaeker, A., & Belouettar, S. (2008). Electric field distribution in macrofiber composite using interdigitated electrodes. Advanced materials research, 47-50,1173-1176.

71. Preumont, A., De Marneffe, B., & Deraemaeker, A. (2008). The damping of a trussstructure with a piezoelectric transducer. Computers & structures, 86, 227-239.doi:10.1016/j.compstruc.2007.01.038

72. Filomeno Coelho, R., Breitkopf, P., & Knopf-Lenoir, C. (2008). Model reduction formultidisciplinary optimization - Application to a 2D wing. Structural and multidisciplinaryoptimization,(37), 29-48.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91665/1/RFC_SMO_2008.pdf

73. Mazzoni, L., Pardoen, T., & Massart, T. (2008). Strain gradient plasticity analysis oftransformation induced plasticity in multi-phase steels. International journal of solids andstructures, 45, 5397-5418. doi:10.1016/j.ijsolstr.2008.05.025

-

12-03-2013 /45


74. Bouillard, P., Almeida, J., Decouvreur, V., & Mertens, T. (2008). Some challengesin computational vibro-acoustics: verification, validation and medium frequencies.Computational mechanics, 42(2), 317-326.

75. Decouvreur, V., Ladevèze, P., & Bouillard, P. (2008). Updating 3D acoustic modelswith the constitutive law error method: a two-step approach for absorbing materialcharacterization. Journal of sound and vibration, 310, 985-997.

76. Mertens, T., Gamallo, P., Astley, J., & Bouillard, P. (2008). A mapped finite and infinitepartition of unity method for convected acoustic radiation in axisymmetric domains.Computer methods in applied mechanics and engineering, 197, 4273-4283.

200777. Decouvreur, V., Deraemaeker, A., Ladevèze, P., & Bouillard, P. (2007). Building a suited

reduced modal basis for updating 3D acoustic models with the Constitutive Law Errormethod. Computer methods in applied mechanics and engineering, 196, 3400-3408.

78. Ganguli, A., Deraemaeker, A., & Preumont, A. (2007). Regenerative chatter reductionby active damping control. Journal of sound and vibration, 300, 847-862. doi:10.1016/j.jsv.2006.09.005

79. Preumont, A., Horodinca, M., Romanescu, I. I., De Marneffe, B., Avraam, M. T.,Deraemaeker, A., Bossens, F., & Abu-Hanieh, A. M. (2007). A six-axis single-stage activevibration isolator based on Stewart platform. Journal of sound and vibration, 300, 644-661.doi:10.1016/j.jsv.2006.07.050

80. Pierret, S., Filomeno Coelho, R., & Kato, H. (2007). Multi-disciplinary and multipleoperating points shape optimization of three-dimensional compressor blades. Structuraland multidisciplinary optimization,(33), 61-70.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91666/1/PIERRET_SMO_2007.pdf

81. Massart, T., Peerlings, R., & Geers, M. (2007). Structural damage analysis of masonrywalls using computational homogenisation. International journal of damage mechanics,16(2), 199-226.

82. Massart, T., Peerlings, R., & Geers, M. (2007). An enhanced multi-scale approachfor masonry walls computations with localization of damage. International journal fornumerical methods in engineering, 69(5), 1022-1059. doi:10.1002/nme.1799

83. Hazard, L., & Bouillard, P. (2007). A partition of unity formulation for the structuraldynamics of viscoelastic sandwich plates. Computer methods in applied mechanics andengineering, 196, 4101-4116.

200684. Ganguli, A., Deraemaeker, A., Romanescu, I. I., Horodinca, M., & Preumont, A. (2006,

août). Simulation and Active Control of Chatter in Milling via a Mechatronic Simulator.Journal of vibration and control, 12(8), 817-848. doi:10.1177/1077546306064708

-

12-03-2013 /45

85. Saadé, K., Warzée, G., & Espion, B. (2006, juillet). Modeling distortional shear inthin-walled elastic beams. Thin-walled structures, 44(7), 808-821. doi:10.1016/j.tws.2006.04.003


86. Ladevèze, P., Puel, G., Deraemaeker, A., & Romeuf, T. (2006). Validation of structuraldynamics models containing uncertainties. Computer methods in applied mechanics andengineering, 195(4-6), 373-393.

87. Deraemaeker, A., & Preumont, A. (2006). Vibration based damage detection usinglarge array sensors and spatial filters. Mechanical systems and signal processing, 20,1615-1630. doi:10.1016/j.ymssp.2005.02.010

88. Kireeva, O., Mertens, T., & Bouillard, P. (2006). A coupled EFGM-CIE method for acousticradiation. Computers & structures, 84, 2092-2099.

89. Decouvreur, V., De Bel, E., & Bouillard, P. (2006). On the effect of the dispersionerror when updating acoustic models. Computer methods in applied mechanics andengineering, 195, 394-405.

200590. Ganguli, A., Deraemaeker, A., Horodinca, M., & Preumont, A. (2005, août). Active

damping of chatter in machine tools: demonstration with a “hardware-in-the-loop”simulator. Proceedings of the Institution of Mechanical Engineers. Part I, Journal ofsystems and control engineering, 219, 359-369.

91. Filomeno Coelho, R., & Bouillard, P. (2005). A multicriteria evolutionary algorithm formechanical design optimization with expert rules. International journal for numericalmethods in engineering,(62), 516-536.

https://dipot.ulb.ac.be/dspace/bitstream/2013/91667/1/RFC_IJNME_2005.pdf

92. Massart, T., Peerlings, R., & Geers, M. (2005). A dissipation-based control method forthe multi-scale modelling of quasibrittle materials’. Comptes rendus. Mécanique, 333(7),521-527.

93. Massart, T., Peerlings, R., Geers, M., & Gottcheiner, S. (2005). Mesoscopic modeling offailure in brick masonry accounting for three-dimensional effects. Engineering fracturemechanics, 72, 1238-1253. doi:10.1016/j.engfracmech.2004.09.007


94. De Bel, E., Villon, P., & Bouillard, P. (2005). Forced vibrations in the medium frequencyrange solved by a partition of unity method with local information. International journal fornumerical methods in engineering, 62, 1105-1126.

200495. Saadé, K., Espion, B., & Warzée, G. (2004, juin). Non-uniform torsional behavior and

stability of thin-walled elastic beams with arbitrary cross sections. Thin-walled structures,42(6), 857-881. doi:10.1016/j.tws.2003.12.003


-

12-03-2013 /45

96. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2004). Updating 2Dacoustic models with the constitutive relation error. Journal of sound and vibration,278(4-5), 571-582.

97. Barthe, D., Deraemaeker, A., Ladevèze, P., & Le Loch, S. (2004). Validation and updatingof models of industrial structures based on the constitutive relation error. AIAA journal,42(7), 1427-1434.

98. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2004). Updating 2Dacoustic models with the constitutive relation error method. Journal of sound and vibration,278(4-5), 773-787.

99. Deraemaeker, A., Ladevèze, P., & Romeuf, T. (2004). Model validation in the presence ofuncertain experimental data. Engineering computations, 21(8), 808-833.

100. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2004). Validation of2D Acoustic Models Based on the Error in Constitutive Relation. Journal of sound andvibration, 278(4-5), 773-787.

101. Peerlings, R., Massart, T., & Geers, M. (2004). A thermodynamically motivated implicitgradient damage framework and its application to brick masonry cracking. Computermethods in applied mechanics and engineering, 193(30-32), 3403-3417. doi:10.1016/j.cma.2003.10.021


102. Massart, T., Peerlings, R., & Geers, M. (2004). Mesoscopic modelling of failure anddamage-induced anisotropy in brick masonry. European journal of mechanics. A, Solids,23(5), 719-735. doi:10.1016/j.euromechsol.2004.05.003


103. Boeve, J. L., Ducarme, V., Mertens, T., Bouillard, P., & Angeli, S. (2004). Surfacestructure, model and mechanism of an insect integument adapted to be damaged easily.Journal of nanobiotechnology, 2, 10. doi:10.1186/1477-3155-2-10

104. Bouillard, P., Lacroix, V., & De Bel, E. (2004). A wave oriented meshless formulation foracoustical and vibroacoustical applications. Wave motion, 39(4), 295-305.

2003105. Deraemaeker, A., Ladevèze, P., & Le Loch, S. (2003). Results obtained by the CRE

updating method using a plate model. Mechanical systems and signal processing, 17(1),47-54.

106. Filomeno Coelho, R., Bersini, H., & Bouillard, P. (2003). Parametrical mechanical designwith constraints and preferences: application to a purge valve. Computer methods inapplied mechanics and engineering, 192(39-40), 4355-4378.

https://dipot.ulb.ac.be/dspace/bitstream/2013/123857/1/RFC_CMAME_2003.pdf

107. Massart, T., Bouillard, P., Geers, M., & Peerlings, R. (2003). Anisotropic damage effects inmasonry walls. Journal de Physique. Colloques, 105, 149-157.

-

12-03-2013 /45

108. Lacroix, D., & Bouillard, P. (2003). Improved sensitivity analysis by a coupled FE-EFGmethod. Computers & structures, 81(26-27), 2431-2439.

109. Lacroix, V., Bouillard, P., & Villon, P. (2003). An iterative defect-correction type meshlessmethod for acoustics. International journal for numerical methods in engineering, 57(15),2131-2146.

2002110. Saadé, K., Espion, B., & Warzée, G. (2002, septembre). Modelisation des poutres à parois

minces soumises à la torsion mixte. Revue M, 47(3), 131-139.

111. Deraemaeker, A., Ladevèze, P., & Leconte, P. (2002). Reduced bases for model updatingin structural dynamics based on Constitutive Relation Error. Computer methods in appliedmechanics and engineering, 191(21-22), 2427-2444.

112. Lacroix, V., & Bouillard, P. (2002). A parallel Element-Free Galerkin formulationfor acoustic analyses: rationale and strategy. European journal of mechanical andenvironmental engineering, 47(1), 3-10.

2001113. Karamanos, K., Nicolis, G., Massart, T., & Bouillard, P. (2001). Dissipation in Laplacian

fields across irregular boundaries. Physical review. E, Statistical, nonlinear, and softmatter physics, 64, 10 pages.

114. Kanok-Nukulchai, W., Barry, W. J., Saran-Yasoontorn, K., & Bouillard, P. (2001). Onelimination of shear locking in the Element-Free Galerkin Method. International journal fornumerical methods in engineering, 52(7), 705-725.

115. Suleau, S., & Bouillard, P. (2001). Accurate acoustic computations using a meshlessmethod. Computer Assisted Mechanics and Engineering Sciences, 8, 455-468.

116. Irimie, S. E., & Bouillard, P. (2001). Residual A Posteriori Error Estimation for the FiniteElement Solution of the Helmholtz Equation. Computer methods in applied mechanics andengineering, 190(31), 4027-4042.

2000117. Suleau, S., Deraemaeker, A., & Bouillard, P. (2000). Dispersion and pollution of meshless

solutions for the Helmholtz equation. Computer methods in applied mechanics andengineering, 190, 639-657.

118. Irimie, S. E., & Bouillard, P. (2000). Effectivity of the Verfürth's error estimator for the FEsolution of the Helmholtz equation. Comptes rendus des séances de l'Académie dessciences. Série 2, Mécanique-physique, Chimie, Sciences de l'univers, Sciences de laTerre, 328, 67-71.

119. Suleau, S., & Bouillard, P. (2000). 1D Dispersion Analysis for the Element-Free GalerkinMethod for the Helmholtz Equation. International journal for numerical methods inengineering, 47(6), 1169-1188.

1999

-

12-03-2013 /45

120. Deraemaeker, A., Babuska, I., & Bouillard, P. (1999). Dispersion and pollution of the FEMsolution for the Helmholtz equation in one, two and three dimensions. International journalfor numerical methods in engineering, 46, 471-499.

121. Deraemaeker, A., Babuska, I., & Bouillard, P. (1999). Mesure de la dispersion pour lasolution éléments finis de l'équation de Helmholtz. Comptes rendus de l'Académie dessciences. Série 2, Mécanique, physique, chimie, sciences de l'univers, sciences de laterre, 327, 103-108.

122. Bouillard, P. (1999). Admissible fields and error estimation in acoustic FEA with lowwavenumbers. Computers & structures, 73(1-5), 227-237.

123. Bouillard, P. (1999). Influence of the pollution on the admissible field error estimation forFE solutions of the Helmholtz equation. International journal for numerical methods inengineering, 45, 783-800.

124. Bouillard, P., & Ihlenburg, F. (1999). Error estimation and adaptivity for the finite elementsolution in acoustics. Computer methods in applied mechanics and engineering, 176(1-4),147-163.

125. Bouillard, P., & Suleau, S. (1999). Optimized meshless method for acoustics. Comptesrendus des séances de l'Académie des sciences. Série 2, Mécanique-physique, Chimie,Sciences de l'univers, Sciences de la Terre, 327, 109-114.

1998126. Bouillard, P., & Suleau, S. (1998). Element-free Galerkin method for Helmholtz problems:

formulation and numerical assessment of the pollution effect. Computer methods inapplied mechanics and engineering, 162(1-4), 317-335.

127. Saint-Georges, P., Notay, Y., & Warzée, G. (1998). Efficient iterative solution ofconstrained finite element analyses. Computer methods in applied mechanics andengineering, 160, 101-114.

1996128. Bouillard, P., Allard, J.-F., & Warzée, G. (1996). A Posteriori Error Estimation for the Finite

Element Method in Acoustics. Communications in numerical methods in engineering, 12,581-594.

129. Bouillard, P., Allard, J.-F., & Warzée, G. (1996). Accuracy Control for Acoustic FiniteElement Analyses. Acustica United with Acta Acustica, 82, 156.

130. Saint-Georges, P., Warzée, G., Beauwens, R., & Notay, Y. (1996). High performancePCG solvers for FEM structural analyses. International journal for numerical methods inengineering, 39, 1313-1340.

1991131. Warzée, G., & Warzée, N. (1991). Traitement d'images et utilisation de la CAO pour la

fabrication de prothèses. Onde électrique, 71(4), 26-29.

-

12-03-2013 /45

Communications publiées lors de congrès ou colloques nationaux etinternationaux (259)

Accepté pour publication132. Brehm, M., Massart, T., & Deraemaeker, A. (2013). Modeling of concrete cracking for the

design of SHM systems: comparison of implicit gradient damage models and simplifiedlinear representations. In Proceedings of.

133. Tondreau, G., & Deraemaeker, A. (s.d.). Experimental localization of small damages usingmodal filters. IMAC-XXXI: Conference and Exposition on Structural Dynamics.

134. Dumoulin, C., Karaiskos, G., & Deraemaeker, A. (2013, mars 14). Monitoring of crackpropagation in reinforced concrete beams using embedded piezoelectric transducers.Proceedings of 8th International Conference on Fracture Mechanics of Concrete andConcrete Structures.

135. Karaiskos, G., Flawinne, S., Sener, J.-Y., & Deraemaeker, A. (2013, juillet 08). Designand validation of embedded piezoelectric transducers for damage detection applicationsin concrete structures. Proceedings of 10th International Conference on DamageAssessment of Structures (DAMAS 2013).

136. Filomeno Coelho, R., & Herrera, M. (2013). Metamodels for mixed variables by multiplekernel regression. 10th World Congress on Structural and Multidisciplinary Optimization(WCSMO 10), Orlando, Florida, USA, May 19-24.

137. Richardson, J. N., Filomeno Coelho, R., & Adriaenssens, S. (2013). Robust topologyoptimization of 2D and 3D continuum and truss structures using a spectral stochastic finiteelement method. 10th World Congress on Structural and Multidisciplinary Optimization(WCSMO 10), Orlando, Florida, USA, May 19-24.

2012138. Karaiskos, G., Tondreau, G., Figueiredo, E., Farrar, C., & Deraemaeker, A. (2012, juillet

06). Application of modal filters for damage detection in the presence of non-linearities.Proceedings of 6th European Workshop on Structural Health Monitoring.

139. Carette, J., Dumoulin, C., Karaiskos, G., Staquet, S., & Deraemaeker, A. (2012, juillet05). Monitoring of the E-modulus in early age concrete since setting time with embeddedpiezoelectric transducers. Proceedings of Structural Faults + Repair, 14th InternationalConference and Exhibition.

140. Dumoulin, C., Karaiskos, G., Carette, J., Staquet, S., & Deraemaeker, A. (2012, mai02). Monitoring of the ultrasonic P-wave velocity in early-age concrete using SmartAggregates. Proceedings of International Conference on Structural Nonlinear Dynamicsand Diagnosis (CSNDD).

141. Brehm, M., Massart, T., & Deraemaeker, A. (2012). Towards a more realisticrepresentation of concrete cracking for the design of SHM systems: updating anduncertainty evaluation of implicit gradient cracking models. In Proceedings of.

-

12-03-2013 /45

142. Brehm, M., Massart, T., & Deraemaeker, A. (2012). Application of an updated notchedbeam model using an implicit gradient cracking approach for the purpose of damagedetection based on dynamic strains. In Proceedings of.

143. Richardson, J. N., Adriaenssens, S., Bouillard, P., & Filomeno Coelho, R. (2012).Symmetry of solutions in discrete and continuous structural topology optimization. CST2012 - Eleventh International Conference on Computational Structures Technology,Dubrovnik, Croatia, September 4-7.

144. Guenot, M., Lepot, I., Sainvitu, C., & Filomeno Coelho, R. (2012). Online training of data-driven POD-based surrogates for optimization. 6th European Congress on ComputationalMethods in Applied Sciences and Engineering - ECCOMAS 2012, Vienna, Austria,September 10-14.

145. Filomeno Coelho, R. (2012). Extending moving least squares to mixed variables formetamodel-assisted optimization. 6th European Congress on Computational Methods inApplied Sciences and Engineering - ECCOMAS 2012, Vienna, Austria, September 10-14.

146. Kato, H., & Filomeno Coelho, R. (2012). Study on the effectivenesss of polynomial chaosexpansion as uncertainty propagation model of supersonic turbine performance. JSME-KSME Thermal and Fluids Engineering Conference TFEC 8, Songdo Convensia Center,Incheon, Korea, March 18-21.

147. Descamps, B., & Filomeno Coelho, R. (2012). A simultaneous analysis and designformulation for the shape and topology optimization of large-scale trusses. WCCM 10- Proceedings of the Tenth World Congress on Computational Mechanics, São Paulo,Brazil, July 8-13.

148. Lebon, J., Filomeno Coelho, R., Breitkopf, P., & Villon, P. (2012). Non-intrusive sparsemoving least squares applied to structural optimization under uncertainty. 6th EuropeanCongress on Computational Methods in Applied Sciences and Engineering - ECCOMAS2012, Vienna, Austria, September 10-14.

149. Lebon, J., Filomeno Coelho, R., Breitkopf, P., & Villon, P. (2012). A non-intrusivemetamodelling strategy based on sparse mixed polynomial basis applied to multiobjectiveoptimization under uncertainty. WCCM 10 - Proceedings of the Tenth World Congress onComputational Mechanics, São Paulo, Brazil, July 8-13.

150. Descamps, B., & Filomeno Coelho, R. (2012). Shape and topology optimization forthe stress-based truss design under multiple loading. EngOpt 2012 - 3rd InternationalConference on Engineering Optimization, Rio de Janeiro, Brazil, July 1-5.

151. Xiao, M., Breitkopf, P., Filomeno Coelho, R., & Zhang, W. (2012). Constrained reduced-order modeling for the great number of constraints' problem. 4th International Conferenceon Multidisciplinary Design Optimization and Application (ASMDO), Xi'an, China,November 5-9.

152. Filomeno Coelho, R., & Herrera, M. (2012). Multicriteria evolutionary optimization of trussstructures with mixed variables. 4th International Conference on Multidisciplinary DesignOptimization and Application (ASMDO), Xi’an, China, November 5-9.

-

12-03-2013 /45

153. Sonon, B., Hashemi Afrapoli, M. A., Verbrugge, J.-C., Francois, B., & Massart, T. (2012).Effect of fabric on elastic properties of a lime treated clayey sand. Proceeding of theinternational symposium - Ground improvement works, II (pp. 489-499).

154. Hashemi Afrapoli, M. A., Kadiri, H., Massart, T., Verbrugge, J.-C., & Francois, B. (2012).Influence of the clay content of a lime-treated soil on its compression strength. Proceedingof the international symposium - Ground improvement works, II (pp. 365-372).

155. Hashemi Afrapoli, M. A., Zine, N., Massart, T., Verbrugge, J.-C., & Francois, B. (2012).Lime-treatment of sand improved by bentonite addition. European Young TechnicalEngineers Conference (EYGEC).

2011156. Dechamps, Y., Bouillard, P., & Rammer, Y. (2011, octobre 12). Environmental Risk

Analysis for High-Rise Buildings In Belgium With The European Seveso Directives. WhyTall? Green, Safety & Humanity. Séoul, Corée du Sud: Council on Tall Buildings & UrbanHabitat.

157. Deraemaeker, A., & Tondreau, G. (2011, septembre 13). Comparison of damagelocalization based on modal filters using strains measurements and accelerationmeasurements. IWSHM2011.

https://dipot.ulb.ac.be/dspace/bitstream/2013/105081/1/paper_DERAEMAEKER_TONDREAUv2.pdf

158. Deraemaeker, A. (2011). Assessment of damage localization based on spatial filters usingnumerical crack propagation models. Proceedings of DAMAS 2011.

159. Tondreau, G., Reynders, E., & Deraemaeker, A. (2011). Towards a more realisticmodeling of the uncertainty on the identified mode shapes due to measurement noise.Proceedings of DAMAS 2011.

160. Tondreau, G., Deraemaeker, A., & Papatheou, E. (2011). Experimental damage detectionusing modal filters on an aircraft wing. Proceedings of Eurodyn 2011.

161. Progneaux, A., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2011). Model updating inacoustics based on local error estimators. ADMOS 2011.

162. Progneaux, A., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2011). Updatingacoustical FE models: localization of unreliable physical. Internoise. Osaka, Japon.

163. Filomeno Coelho, R., Lebon, J., Bouillard, P., Breitkopf, P., & Villon, P. (2011). Modelselection methods for stochastic metamodels - Application to multiobjective reliability-based optimization. 9th World Congress on Structural and Multidisciplinary Optimization -WCSMO 9, Granship/Shizuoka Cultural Foundation, Shizuoka, Japan, June 13-17.

164. Filomeno Coelho, R., Lebon, J., Bouillard, P., Breitkopf, P., & Villon, P. (2011). Sparseapproximation schemes for optimization under uncertainty. Advanced COmputationalMethods in ENgineering - ACOMEN, University of Liège, Liège, Belgium, November14-17.

-

12-03-2013 /45

165. Lebon, J., Filomeno Coelho, R., Bouillard, P., & Breitkopf, P. (2011). Model selectiontechniques applied to structural reliability using bilevel hierarchical metamodels. 11thNational Congress on Computational Mechanics (USNCCM 11), Minneapolis, Minnesota,July 25-29.

166. Descamps, B., Bouillard, P., Filomeno Coelho, R., & Ney, L. (2011). The principia designmethod for the form finding and optimization of truss grids. International Association forBridge and Structural Engineering (IABSE) - International Association for Shell and SpatialStructures (IASS) Symposium 2011, London, UK, September 20-23.

167. Lebon, J., Filomeno Coelho, R., Bouillard, P., & Breitkopf, P. (2011). Validation ofmetamodeling strategies for probability assessment in a non-intrusive stochastic finiteelement context. ADMOS 2011 - Proceedings of the Fifth International Conference onAdaptive Modeling and Simulation, Paris, France, June 6-8.

168. Xiao, M., Breitkopf, P., Filomeno Coelho, R., Knopf-Lenoir, C., & Villon, P. (2011).CPOD2 : Réduction de modèles par POD contrainte pour l'optimisation de forme enmécanique. 10ème Colloque National en Calcul des Structures, Giens, France, May 9-13.

169. Lebon, J., Filomeno Coelho, R., Bouillard, P., & Breitkopf, P. (2011). Sélection de modèleappliquée à l'optimisation fiabiliste par métamodèles stochastiques hiérarchiques. 10èmeColloque National en Calcul des Structures, Giens, France, May 9-13.

170. Richardson, J. N., Adriaenssens, S., Bouillard, P., & Filomeno Coelho, R. (2011).Multicriteria topology optimization of truss structures with kinematic stability repair. SecondAfrican Conference on Computational Mechanics - AfriCOMP11, Cape Town, SouthAfrica, January 5-8.

171. Descamps, B., Bouillard, P., & Filomeno Coelho, R. (2011). Recherche d'équilibre etd'optimalité au travers d'un processus de conception intégrée. Séminaire LOCI, Facultéd'architecture, d'ingénierie architecturale, d'urbanisme, Louvain-la-Neuve, Belgium,February 8.

172. Kato, H., & Filomeno Coelho, R. (2011). A study on uncertainty propagation modelingin flow analysis. JMSE 24th Computational Mechanics Division Conference, OkayamaUniversity, Japan, October 8-10.

173. Sainvitu, C. C., Guenot, M., Lepot, I. I., Goblet, J., & Filomeno Coelho, R. (2011). Adaptivesampling strategies for POD-based surrogate models in an optimization framework.EUROGEN 2011 (Evolutionary and Deterministic Methods for Design, Optimization andControl with Applications to Industrial and Societal Problems, Capua, Italy, September14-16.

174. Santafe Iribarren, B., Berke, P., Massart, T., Bouillard, P., & Vantomme, J. (2011). Effectof concrete rate dependent behaviour on structural progressive collapse. Eurodyn2011.

175. Postiaux, N., Bouillard, P., & Romainville, M. (2011). Conception et évaluation d'uneméthodologie de définition d'un référentiel de compétences: état des lieux d'une rechercheen cours en formation d'ingénieur. CEFI.

2010

-

12-03-2013 /45

176. Dechamps, Y., Bouillard, P., & Rammer, Y. (2010, décembre 16). Intégration des risquesliés à l'environnement dans l'analyse critique de nouveaux immeubles-tours. Analyseglobale de risques liés aux immeubles de grande hauteur - Globale risicoanalyse vanhoge gebouwen (p. 174). Bruxelles: Rammer, Y., Dechamps, Y., De Wolf, C.

https://dipot.ulb.ac.be/dspace/bitstream/2013/78083/1/Yves DECHAMPS Abstract.pdf

177. Tondreau, G., & Deraemaeker, A. (2010). Damage localization in bridges using multi-scalefilters and large strain sensor networks. Proceedings ISMA 2010.

178. Tondreau, G., & Deraemaeker, A. (2010). Vibration based damage localization usingmulti-scale filters and large strain sensor networks. Proceedings EWSHM 2010.

179. Deraemaeker, A., Tondreau, G., & Bourgeois, F. (2010). Equivalent loads for flatpiezoelectric transducers attached to shell structures. Proceedings ECCM 2010.

180. Progneaux, A., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2010). Updatingacoustical FE models: localization of unreliable physical data. Proceedings ISMA 2010.

181. Deraemaeker, A. (2010). On the use of dynamic strains and curvatures for vibration baseddamage localization. Proceedings EWSHM 2010.

182. Chesne, S., & Deraemaeker, A. (2010). Sur l'utilisation des transmissibilités pour lalocalisation des défauts dans les systèmes non dispersifs. Proceedings of the 10eCongrès français d'acoustique.

183. Deraemaeker, A. (2010). Modélisation des structures piézoélectriques: transducteurscomposites et calcul des forces équivalentes pour des patches de forme quelconque.Séminaire CNAM.

184. Xiao, M., Raghavan, B., Breitkopf, P., Filomeno Coelho, R., Knopf-Lenoir, C., & Villon, P.(2010). Surrogate models based on constrained POD for optimization. Proceedings of theECCM 2010.

185. Descamps, B., Bouillard, P., & Filomeno Coelho, R. (2010). Shape and topologyoptimization of space structures by the force density method and hybrid geneticalgorithms. International Association for Shell and Spatial Structures (IASS) Symposium2010, Spatial Structures - Permanent and Temporary, Shanghai, China, November 8-12(pp. 1539-1550).

186. Filomeno Coelho, R., Lebon, J., & Bouillard, P. (2010). Multiobjective reliability-basedoptimization of truss structures with stochastic surrogate models. ECCM 2010 - IVEuropean Conference on Computational Mechanics, Palais des Congrès, Paris, France,May 16-21.

187. Berke, P., & Massart, T. (2010). Influence of a sliding velocity dependent friction law onthe coupled effect of friction and surface roughness on shallow spherical nanoindentation.Proceedings of the 5th International Conference Multiscale Materials Modelling.

-

12-03-2013 /45

188. Massart, T., & Mercatoris, B. (2010). Multi-scale modelling of failure in heterogeneousperiodic thin shells. Proceedings of the European Conference on ComputationalMechanics.

189. Mercatoris, B., & Massart, T. (2010). Multiscale modelling of shell failure for periodic quasi-brittle materials. Proceedings of the 5th international conference multiscale materialsmodeling.

190. Pardoen, T., Brugger, C., Coulombier, M., Boe, A., Raskin, J.-P., & Massart, T. (2010).Strain hardening in fine grained metallic alloys: from bulk to thin film systems. Internationalsymposium on Plasticity.

191. Everaert, V., Progneaux, A., & Bouillard, P. (2010). Simulation of Sound WavePropagation in Presence of Noise Barrier by using the Partition of Unity Finite ElementsMethod: a comparison with analytical methods in 2D cases. Proceedings of ISMA35,International Conference on Noise and Vibration Engineering.

2009192. Chesne, S., Deraemaeker, A., & Preumont, A. (2009). On the transmissibility functions

and their use for damage localization. Proceedings of the 7th International Workshop onStructural Health Monitoring.

193. Deraemaeker, A. (2009). Smart sensors and sensor networks for vibration based SHM.Deptmt of Mechanical Engineering Seminar.

194. Deraemaeker, A., Nasser, H., & Preumont, A. (2009). Modélisation des composites àfibres piézoélectriques: calcul des coefficients homogénéisés. Compte Rendu JNC 16.

195. Filomeno Coelho, R., Xiao, M., Breitkopf, P., Villon, P., & Sidorkiewicz, M. (2009).Surrogate models based on constrained POD for the multiobjective optimization of anintake port. 8th World Congress on Structural and Multidisciplinary Optimization - WCSMO8, Lisbon, Portugal, June 1-5.

196. Filomeno Coelho, R., Xiao, M., Breitkopf, P., Villon, P., & Sidorkiewicz, M. (2009). Modelreduction combining constrained POD and kriging for optimization under uncertainty:application to an intake port. ADMOS 2009 - Proceedings of the Fourth InternationalConference on Adaptive Modeling and Simulation, Université Libre de Bruxelles, Belgium,May 25-27 (pp. 80-83).

197. Filomeno Coelho, R., Bouillard, P., Xiao, M., Breitkopf, P., Knopf-Lenoir, C., Villon, P.,& Sidorkiewicz, M. (2009). Multicriteria optimization under uncertainty in automotiveengineering. International Conference on Advances in Mechanical and Building Sciencesin the 3rd millenium - ICAMB 2009, Vellore Institute of Technology, Vellore, India,December 14-16.

198. Xiao, M., Filomeno Coelho, R., Breitkopf, P., Knopf-Lenoir, C., Villon, P., & Sidorkiewicz,M. (2009). Réduction de modèles par CPOD et krigeage - Application à l'optimisation deforme d'un conduit d'admission. 9ème Colloque National en Calcul des Structures, Giens,France, May 25-29 (pp. 463-468).

-

12-03-2013 /45

199. Mercatoris, B., & Massart, T. (2009). A coupled two-scale computational approachfor quasi-brittle out -of-plane structural failure. In M. Papadrakakis, N. Lagros,& M. Fragiadakis (Eds.), Proc. COMPDYN2009, Eccomas thematic conferenceon computational methods in structural dynamics and earthquake engineering(COMPDYN2009).

200. Santafé, B., Massart, T., Vantomme, J., & Bouillard, P. (2009). Rate-dependent moment-curvature relations for the progressive collapse of RC structures. In M. Papadrakakis, N.Lagros, & M. Fragiadakis (Eds.), Proc. COMPDYN2009, Eccomas thematic conference oncomputational methods in structural dynamics and earthquake engineering.

201. Massart, T., & Mercatoris, B. (2009). A coupled two-scale computational approach formansonry out-of-plane failure. Proceedings of the 12th international conference onfracture.

202. Mercatoris, B., & Massart, T. (2009). Assessment of periodic homogenisation-based multi-scale computational schemes for quasi-brittle structural failure. Proceedings of the Xinternational conference on computational plasticity.

203. Berke, P., & Massart, T. (2009). Coupled frictional and surface roughness effects inshallow spherical nanoindentation. Proceedings of the 1st International Conference onComputational Contact Mechanics.

204. Berke, P., & Massart, T. (2009). Coupled friction and roughness surface effects in shallownanoindentation. Proceedings of the X International Conference on ComputationalPlasticity.

205. Massart, T., Mazzoni, L., & Pardoen, T. (2009). Evolving confinement and straingradient plasticity for the size dependent behaviour of polycrystals. Proceedings of the XInternational Conference on Computational Plasticity.

206. Brugger, C., Coulombier, M., Boe, A., Colla, M., Raskin, J.-P., Massart, T., & Pardoen, T.(2009). Imperfection and size dependent ductility of freestanding metallic films. MaterialsResearch Society Fall meeting.

207. Massart, T., Mazzoni, L., & Pardoen, T. (2009). Evolving confinement and strain gradientplasticity for the size dependent flow properties of polycrystalline materials. InternationalConference on the Strength of Materials.

208. Pardoen, T., Jacques, P., & Massart, T. (2009). Size dependent strength and ductilityoptimization of multiphase steels. Materials Science and Technology.

209. Brugger, C., Coulombier, M., Boe, A., Raskin, J.-P., Massart, T., & Pardoen, T. (2009).Strain gradient plasticity based modelling of the necking in thin metallic films: influence ofgrain size and imperfections. Materials Science and Technology.

210. Brugger, C., Coulombier, M., Boe, A., Raskin, J.-P., Massart, T., & Pardoen, T. (2009).Strain gradient plasticity based modelling of the ductility of thin freestanding metallic films.International Conference on the Strength of Materials.

-

12-03-2013 /45

211. Brugger, C., Massart, T., Raskin, J.-P., & Pardoen, T. (2009). Strain gradient plasticitybased modelling of the size dependent strength and ductility of thin polycrystalline metallicfilms. Innovations in Thin Film Processing and Characterisation.

212. Progneaux, A., Bouillard, P., & Ladevèze, P. (2009). A new constitutive relation errorformulation for updating acoustical models. Proccedings of the International conference onon sound and vibration.

213. Bourgeois, J.-M., Moitinho, J., & Bouillard, P. (2009). Dual error for acoustics. Proceedingsof the International conference on adaptive modeling and stimulation.

214. Progneaux, A., Bouillard, P., & Ladevèze, P. (2009). A new constitutive relation errorformulation for updating acoustical models. Proceedings of the International conference onadaptive modeling and simulation.

215. Attas, D., Provost, M., & Bouillard, P. (2009). Definition and identification of an engineeringheritage: Application to the region of Brussels. Proceedings of the Third internationalcongress on construction history.

2008216. Preumont, A., Bastaits, R., Deraemaeker, A., De Marneffe, B., El Ouni, M., & Rodrigues,

G. (2008, juin). Structural Intelligence: Self Monitoring, Actuation and Adaption, InvitedLecture. 3rd Conf. on Smart Materials and Structures Systems.

217. Deraemaeker, A., El Ouni, M., Romanescu, I. I., & Preumont, A. (2008). The smart bridgedemonstrator: description of the experimental set up. ISMA 2008.

218. Nasser, H., Deraemaeker, A., & Belouettar, S. (2008). Electric field distribution in macrofiber composite using interdigitated electrodes. International Conference on Multi-Functional Materials and Structures.

219. Deraemaeker, A., El Ouni, M., & Preumont, A. (2008). Active tendon control of cablestructures at ULB. Symposium onMechanics of Slender Structures.

220. Preumont, A., Rodrigues, G., & Deraemaeker, A. (2008). Multilayer piezocomposites forvibration damping and figure control of deformable mirrors. Actuator 08.

221. Filomeno Coelho, R., Breitkopf, P., Villon, P., & Sidorkiewicz, M. (2008). Surrogate modelswith kriging and POD for the optimization of an intake port. International Conference onEngineering Optimization - EngOpt 2008, Rio de Janeiro, Brazil, June 1-5.

222. Filomeno Coelho, R., Breitkopf, P., Villon, P., & Knopf-Lenoir, C. (2008). Reduced modelsfor coupled aerodynamic and structural optimization of a flexible wing. InternationalConference on Engineering Optimization - EngOpt 2008, Rio de Janeiro, Brazil, June 1-5.

223. Santafé, B., Massart, T., Bouillard, P., & Vantomme, J. (2008). Rate dependent effectsin the simulation of progressive collapse of RC structures. Proceedings of the 7th worldcongress on computational mechanics (WCCM VII) and ECCOMAS2008.

-

12-03-2013 /45

224. Menchel, K., Massart, T., & Bouillard, P. (2008). Dynamic inertial effects during structuralprogressive collapse in RC structures. Proceedings of the 7th world congress oncomputational mechanics (WCCM VII) and ECCOMAS2008.

225. Mercatoris, B., Massart, T., & Bouillard, P. (2008). A coupled two-scale computationalapproach for masonry shells at failure. Proceedings of the AGS08.

226. Mercatoris, B., & Massart, T. (2008). Failure detection in masonry shells homogenisationand its incorporation in coupled two-scale computations. Proceedings of the 8th WorldCongress on Computational Mechanics.

227. Mazzoni, L., Pardoen, T., & Massart, T. (2008). Evolving higher-order boundaryconditions in strain gradient based analysis of plasticity in heterogeneous microstructures.Proceedings of the 8th World Congress on Computational Mechanics.

228. Geers, M., Kouznetsova, V., Massart, T., Ozdemir, I., Coenen, E., Brekelmans, W., &Peerlings, R. (2008). Multi-scale computational homogenisation: trends & challenges.Advanced Computational Methods in Engineering.

229. Bouillard, P., Robert, F., & Postiaux, N. (2008). Competence framework: a tool to designlearning and assessment activities. Proceedings of the 4th International CDIO Conference.

230. Mertens, T., Astley, J., & Bouillard, P. (2008). Convected acoustic radiation usinga mapped infinite partition of unity method: axisymmetric and three-dimensionalapplications. Proceedings of the 7th world congress on computational mechanics (WCCMVII) and ECCOMAS2008.

231. Nkoumou Nkoumou, P. Y., Mertens, T., & Bouillard, P. (2008). Sound wave propagationmodeling in the presence of a noise barrier: a comparison between analytical andnumerical solutions. Proceedings of the International conference on noise and vibrationengineering.

232. Postiaux, N., Bouillard, P., & Romainville, M. (2008). Présentation d'un référentiel decompétences en formation d'ingénieurs: finalité et méthodologie. Actes du 5e colloque surdes questions de pédagogies dans l'enseignement supérieur.

233. Bouillard, P., & Canter, S. (2008). Expériences pilotes de la politique qualité à l'Universitélibre de Bruxelles. Actes du 25e Congrès de l'Association Internationale de pédagogieUniversitaire.

234. Bouillard, P., Postiaux, N., & Robert, F. (2008). Le référentiel de compétences àl'université: outil d'une politique Qualité. Exemple en formation d'ingénieurs. Actes du 25eCongrès de l'Association Internationale de pédagogie Universitaire.

235. Nkoumou Nkoumou, P. Y., Mertens, T., & Bouillard, P. (2008). Sound wave propagationmodelling in the presence of a noise barrier: a comparison between analytical andnumerical solutions. International Conference on Computational Structures Technology.

236. Berke, P., Delplancke, M.-P., Lyalin,, Semenikhina,, & Solov'yov, (2008). Simulation of thenanoindentation procedure on Nickel on the smallest length scale : a simple atomistic level

-

12-03-2013 /45

model. Latest Advances in Atomic Cluster Collisions : structure and dynamics from thenuclear to the biological scale (pp. 205-224).

2007237. Deraemaeker, A. (2007). Model reduction for coupled electro-acousto-mechanical systems

and parametrized systems. Workshop on model reduction and control.

238. Nasser, H., Deraemaeker, A., Mevel, L., & Basseville, M. (2007). Modal filtering datareduction and subspace detection for handling the temperature effect in structural healthmonitoring. Proceedings of Evaces 2007.

239. Deraemaeker, A., Benelechi, S., Benjeddou, A., & Preumont, A. (2007). Analytical andnumerical computation of homogenized properties of MFCs: Application to a compositeboom with MFC actuators and sensors. Proceedings of the III ECCOMAS thematicconference on Smart Structures and Materials.

240. Deraemaeker, A., De Roeck, G., Reynders, E., Worden, K., Manson, G., Kullaa, J.,Lamsa, V., & Ostachowicz, W. (2007). Smart sensing for structural health monitoring(S3HM). Proceedings of the SMSST 2007 : World Forum on Smart Materials and SmartStructures Technologies.

241. Deraemaeker, A., Nasser, H., & Preumont, A. (2007). Some issues in the modellingand design of MFC actuators and sensors. International symposium on PiezocompositeApplications.

242. Haase, F., Kauba, M., Mayer, D., van der Auweraer, H., Gajdatsy, P., de Oliveira, L., daSilva, M., Sas, P., & Deraemaeker, A. (2007). Active vibration control of an automotivefirewall for interior noise reduction. Adaptronics Congres.

243. Preumont, A., De Marneffe, B., Rodrigues, G., Nasser, H., & Deraemaeker, A. (2007).Dynamique et contrôle en mécanique de précision. Actes du 8e Colloque National enCalcul des Structures.

244. Filomeno Coelho, R., Li, L., Breitkopf, P., & Knopf-Lenoir, C. (2007). Modèle simplifiédiffus dans le cadre d'une stratégie d'optimisation multidisciplinaire. 8ème ColloqueNational en Calcul des Structures, Giens, France, May 21-25 (pp. 553-559). HermèsLavoisier.

245. Filomeno Coelho, R., & Pierret, S. (2007). Optimisation aéromécanique d'aubes deturbomachines dans le cadre du projet européen VIVACE. 8ème Colloque National enCalcul des Structures, Giens, France, May 21-25 (pp. 525-531).

246. Massart, T., & Mercatoris, B. (2007). A coupled two-scale computational approachfor mansonry plates at failure. Proceedings of the IX international conference oncomputational plasticity.

247. Mercatoris, B., Massart, T., & Diaby, A. (2007). A multi-scale strategy for the modelling offailure in masonry plates. Proceedings of the 9th US National Congress on ComputationalMechanics.

-

12-03-2013 /45

248. Berke, P., Tam, E., & Massart, T. (2007). Coupled experimental-numerical analysisof nanoindentation on pure Nickel. roceedings of the 9th US National Congress onComputational Mechanics.

249. Mazzoni, L., Massart, T., & Pardoen, T. (2007). Strain Gradient plasticity based analysis oftransformation induced plasticity in multiphase steels. Proceedings of the IX InternationalConference on Computational Plasticity.

250. Mazzoni, L., Massart, T., & Pardoen, T. (2007). Strain Gradient Plasticity Based Analysisof Transformation Induced Plasticity in Multiphase Steels. European Congress onAdvanced Materials and Processes.

251. Mercatoris, B., Massart, T., & Diaby, A. (2007). Two-scale computational approaches formasonry structures with localisation of damage and their extension to flexural effects.Proceedings of the International conference on modeling of heterogeneous materials withapplications in construction and biomedical engineering.

252. Postiaux, N., Bouillard, P., & Romainville, M. (2007). Un référentiel de compétencesen formation d'ingénieurs dans un contexte universitaire: Impact sur les pratiquesd'enseignement: une hypothèse à creuser? Actes du 4ème colloque : questions depédagogies dans l'enseignement supérieur (pp. 983-990). Presses universitaires delouvain.

253. Bouillard, P., Lambrighs, S., & Rammer, Y. (2007). Concours de projet multidisciplinairesen formation d'ingénieur des constructions. Actes du 4ème colloque: questions depédagogies dans l'enseignement supérieur (pp. 407-412). Presses universitaires delouvain.

254. Decouvreur, V., Ladevèze, P., & Bouillard, P. (2007). Validation of 3D acoustic models:a two step constitutive law error updating method. Proceedings of the Internationalconference on adaptive modelling and simulation.

255. Postiaux, N., Bouillard, P., & Romainville, M. (2007). Référentiel de compétences enformation d'ingénieur: quelle méthodologie pour quelles finalités et quels effets? Actes du24e Congrès de l’Association Internationale de pédagogie Universitaire.

256. Hazard, L., & Bouillard, P. (2007). A partition of unity mindlin plate element for thestructural dynamics of viscoelastic sandwich structures. Proceedings of the 1st conferenceon computational methods in structural dynamics and earthquake engineering.

257. Bouillard, P., Melchor Blanco, C., Bodarwé, E., & Ney, L. (2007). Structural DynamicDesign of the Collegefootbridge under vertical pedestrian loading. Proceedings of the1st Conference on Computational Methods in Structural Dynamics and EarthquakeEngineering.

2006258. de Oliveira, L., Deraemaeker, A., Mohring, J., Desmet, W., & Sas, P. (2006). Representing

coupled vibroacoustic models in controller design for ASAC problems. Proceedings of theISMA 2006.

-

12-03-2013 /45

259. van der Auweraer, H., de Oliveira, L., da Silva, M., herold, S., Mohring, J., &Deraemaeker, A. (2006). A virtual prototyping approach to the design of smart structuresapplications. Proceedings of the ISMA 2006.

260. Deraemaeker, A., & Preumont, A. (2006). Piezoelectric structures: modeling for control.Proceedings of the Ninth International conference on Recent Advances in StructuralDynamics.

261. Deraemaeker, A., Reynders, E., De Roeck, G., & Kullaa, J. (2006). Vibration based SHM:comparison of the performance of modal features vs features extracted from spatial filtersunder changing environmental conditions. Proceedings of the ISMA 2006.

262. Deraemaeker, A., & Preumont, A. (2006). Modelling of an active composite boom withpiezoelectric composite actuators and sensors. Proceedings of the DeMEASS.

263. van der Auweraer, H., herold, S., Mohring, J., de Oliveira, L., da Silva, M., &Deraemaeker, A. (2006). CAE approach to the design of smart structures applications.Proceedings Euronoise 2006.

264. De Marneffe, B., Deraemaeker, A., Horodinca, M., Romanescu, I. I., & Preumont,A. (2006). Active and passive damping of structures with piezoelectric transducers.Proceedings of the 7th National Congress on Theoretical and Applied Mechanics.

265. Deraemaeker, A., Preumont, A., & Kullaa, J. (2006). Modeling and removal ofenvironmental effects for vibration based SHM using spatial filtering and factor analysis.Proceedings of IMAC XXIV.

266. Deraemaeker, A. (2006). Structures intelligentes: contrôle actif et contrôle santé endynamique des structures. Séminaire du LMT Cachan.

267. Mencaglia, X., Filomeno Coelho, R., Kato, H., Lani, F., & Grunevald, Y.-H. (2006).Technical and economical optimization of composite structures. Proceedings of the ITCT2006 - Journées Internationales d'Etudes.

268. Pierret, S., Filomeno Coelho, R., Kato, H., Valentin, V., & Hiernaux, S. (2006). Multipleoperating points and multi-disciplinary optimization of three-dimensional highly loadedturbomachinery blades. Actes du 41e Colloque d'Aérodynamique Appliquée.

269. Kato, H., Pierret, S., & Filomeno Coelho, R. (2006). CAD-centric framework for aero-mechanical optimization - Counter-rotating fan design. Proceedings of the FourthInternational Conference on Computational Fluid Dynamics, Conference Center Het Pand,Ghent, Belgium, July 10-14.

270. Filomeno Coelho, R., Pierret, S., & Cobas, P. (2006). Multiobjective evolutionaryalgorithms applied to aircraft engine design. Proceedings of the 25th Congress of theInternational Council of the Aeronautical Sciences - ICAS 2006, Hamburg, Germany,September 3-8.

271. Pierret, S., Kato, H., Filomeno Coelho, R., & Merchant, A. (2006). Aero-mechanicaloptimization method with direct CAD access - Application to counter rotating fan design.

-

12-03-2013 /45

Proceedings of ASME Turbo Expo Conference 2006 - Power for Land, Air and Sea,Barcelona, Spain, May 8-11. ASME.

272. Mercatoris, B., & Massart, T. (2006). Flexural effects in heterogeneous structures bymeans of computational homogenisation. In B. Topping (Ed.), Proc. 8th internationalconference on computational structures technology (CST2006).

273. Menchel, K., Massart, T., & Bouillard, P. (2006). Progressive collapse simulation in RCstructures. Proceedings of the IIIrd european conference on computational mechanics.

274. Massart, T., Peerlings, R., & Geers, M. (2006). A coupled two-scale computationalframework for modelling masonry cracking. Proceedings of the 7th World Congress onComputational Mechanics.

275. Menchel, K., Massart, T., & Bouillard, P. (2006). Analysis of the progressive collapse of 2Dframes using plastic hinge finite elements. Proceedings of the 3rd European Conferenceon Computational Mechanics.

276. Massart, T., Peerlings, R., & Geers, M. (2006). Damage localisation in masonryhomogenisation and its incorporation in a two-scale computational framework.Proceedings of the 3rd European Conference on Computational Mechanics.

277. Berke, P., & Massart, T. (2006). Numerical simulation of the nanoindentation experiment:sensitivity analysis of the experimental parameters. Proceedings of the 3rd EuropeanConference on Computational Mechanics.

278. Berke, P., & Massart, T. (2006). Numerical simulation of the nanoindentation experiment:influence of the experimental uncertainties. Proceeding of the 3rd International Conferenceon Multiscale Materials Modeling.

279. Postiaux, N., & Bouillard, P. (2006). The portfolio: continuous evaluation tool for thelearning process of non technical competences. Proceedings of the internationalconference on innovation, good practice and research in engineering education (pp.260-265). Liverpool: The higher education académy.

280. Mertens, T., Bouillard, P., Astley, J., Gamallo, P., & Hazard, L. (2006). A partition ofunity formulation for the convested wave equation in axisymmetric unbounded domains.Proceedings of the International conference on noise vibration engineering.

281. Mertens, T., Bouillard, P., Astley, J., Gamallo, P., & Hazard, L. (2006). Acoustic convectedradiation using a partition of unity formulation. Proceedings of the International conferenceon sound and vibration.

282. Moitinho, J., & Bouillard, P. (2006). Dual error estimation for steady-state dynamicproblems. Proceedings of the IIId european conference on computational mechanics.

283. Decouvreur, V., Ladevèze, P., & Bouillard, P. (2006). Updating the 3D acoustic modelwith the constitutive law error method. Proceedings of the IIId european conference oncomputational mechanics.

-

12-03-2013 /45

284. Mertens, T., Bouillard, P., Astley, J., & Gamallo, P. (2006). A partition of unity formulationfor convected wave propagation in unbounded domains. Proceedings of the 7th nationalcongress on theoretical and applied mechanics.

285. Hazard, L., Bouillard, P., & Sener, J.-Y. (2006). A partition of unity finite element methodapplied to the study of viscoelastic sandwich structures. Proceedings of the IIId europeanconference on computational mechanics.

286. Hazard, L., & Bouillard, P. (2006). Structural dynamic behaviour optimization by localdamping systems. Proceedings of the 7th national congress on theoretical and appliedmechanics.

287. Postiaux, N., Bouillard, P., & Romainville, M. (2006). Conception et évaluation d'uneméthodologie de définition d'un référentiel de compétences. Etat des lieux d'unerecherche en cours en formation d'ingénieur. CEFI.

2005288. Avraam, M. T., De Marneffe, B., Romanescu, I. I., Horondica, M., Deraemaeker, A., &

Preumont, A. (2005, octobre). A six degrees of freedom active isolator based on stewartplatform for space applications. 56th International Astronautical Congress.

289. Preumont, A., De Marneffe, B., Romanescu, I. I., Horondica, M., Deraemaeker, A., &Avraam, M. T. (2005, octobre). Zero gravity experiment of a six-axis single stage activevibration isolator based on stewart platform. 16th International conference on adpativestructures and technologies.

290. Preumont, A., De Marneffe, B., & Deraemaeker, A. (2005, septembre). Active and passivedamping of piezoelectric structures. Forum Acusticum 2005.

291. Preumont, A., De Marneffe, B., Deraemaeker, A., & Bossens, F. (2005, juillet). Ondamping structures with piezoelectric transducers. In C. Mota Soares (Ed.), II ECCOMASThematic Conference on SMART Structures and Materials. Lisbon.

292. Deraemaeker, A., & Kullaa, J. (2005, juin). Removal of environmental effects for damagedetection based on spatial filtering. Poster session, ICCos workshop.

293. Pierret, S., Kato, H., Filomeno Coelho, R., & Merchant, A. (2005). Multi-objective andmulti-disciplinary shape optimization. EUROGEN 2005, Evolutionary and DeterministicMethods for Design, Optimization and Control with Applications to Industrial and SocietalProblems, Munich, Germany, September 12-14. FLM.

294. Pierret, S., Kato, H., & Filomeno Coelho, R. (2005). Multi-disciplinary and multipleoperating points shape optimization of three-dimensional compressor blades. 6th WorldCongress on Structural and Multidisciplinary Optimization - WCSMO 6, Rio de Janeiro,Brazil, May 30 - June 3.

295. Massart, T., Peerlings, R., & Geers, M. (2005). A multi-scale method for masonrycomputations. In A. Carpinteri (Ed.), Proc. 11th International Conference on Fracture(ICF11).

-

12-03-2013 /45

296. Massart, T., Peerlings, R., & Geers, M. (2005). Computational homogenisation of masonrybased on mesostructural gradient damage modelling. Proceedings of the 8th U.S. NationalCongress on Computational Mechanics.

297. Massart, T., Peerlings, R., & Geers, M. (2005). A two-scale continuous-discontinuousupscaling procedure for quasi-brittle materials and its application to masonrycomputations. Proceedings of the 76th Annual Meeting of Gesellschaft für AngewandteMathematik und Mechanik.

298. Massart, T., Peerlings, R., & Geers, M. (2005). Modelling of damage development inmasonry walls by a coupled two-scale approach. Mechanics & Materials conference.

299. Massart, T. (2005). On the use of multi-scale computational techniques for masonrystructural computations. Current Challenges in the Intergration of Computational Modellingand Micro/Nano Characterisation of Cementitious Materials.

300. Moitinho de Almeida, J. P., & Bouillard, P. (2005). Dual error estimation for steady-stateacoustic problems. International Conference on Adaptive Modelling and Simulation,ADMOS05.

301. Mertens, T., & Bouillard, P. (2005). A Partition of Unity Formulation for AcousticalRadiation. ICSV12, International Conference on Sound and Vibration.

302. Hazard, L., Bouillard, P., & Sener, J.-Y. (2005). Partition of unity finit element method forthe analysis of damped sandwich structures in the medium frequency range. ICSV12,International Conference on Sound and Vibration.

303. Decouvreur, V., & Bouillard, P. (2005). Updating the 3D acoustic model of a simplifiedcar cabin using the Constitutive Law Error method. ICSV12, International Conference onSound and Vibration.

304. Postiaux, N., Bouillard, P., Duchateau, V., & Persenaire, E. (2005). Un nouvel outild'évaluation des acquis en formation d'ingénieurs: le portefeuille de compétences. Actesdu colloque Questions de pédagogie dans l'enseignement supérieur (pp. 425-430).

305. Bouillard, P., Mertens, T., Hazard, L., & Villon, P. (2005). Numerical modelling of wavepropagation in the medium freqency range: a meshless alternative. Proceedings ofNOVEM2005.

306. Helin, G., Milojevic, D., & Warzée, G. (2005). Hierarchical modeling: virtual tour of thecrypt in Brussels cathedral. Proceedings of Virtual Retrospect 2005 (pp. 602-605).

2004307. Ganguli, A., Horondinca, M., Deraemaeker, A., & Preumont, A. (2004, septembre). A

"hardware in the loop" demonstrator for chatter instability in machine tools. ProceedingsISMA 2004.

308. Deraemaeker, A., & Preumont, A. (2004, septembre). Modal filters for vibration baseddamage detection. Proceedings ISMA 2004.

-

12-03-2013 /45

309. Deraemaeker, A., & Preumont, A. (2004, juillet). Modal filters for vibration baseddamage detection. Proceedings of the Second European Workshop on Structural HealthMonitoring.

310. Deraemaeker, A., & Preumont, A. (2004, juin). Modal filters for vibration based damagedetection. Proceedings SAMCO 7th Workshop.

311. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2004, février). Using areduced modal basis to update acoustic models. Proceedings IMAC XXII.

312. Filomeno Coelho, R., & Bouillard, P. (2004). PAMUCII for multicriteria optimization ofmechanical design with expert rules. CEC 2004 - Congress on Evolutionary Computation,Portland, Oregon, June 20-23 (pp. 17-22). IEEE.

313. Massart, T., & Mercatoris, B. (2004). Multi-scale modelling of damage in masonrystructures. Proceedings of the 16th ALERT workshop on geomaterials.

314. Massart, T., Peerlings, R., & Geers, M. (2004). A multi-scale framework for the analysisof masonry walls. In T. Rossi, T. Rossi, T. Rossi, & T. Rossi (Eds.), Proc. 4th EuropeanCongress on Computational Methods in Applied Sciences and Engineering.

315. Mahieux, A., & Massart, T. (2004). Masonry homogenization: Failure envelopepredictions. In B. Topping & C. Mota Soares (Eds.), Proc. 7th International Conference onComputational Structures Technology (CST2004).

316. Massart, T., Peerlings, R., & Geers, M. (2004). Coupled meso-macro simulation ofmasonry cracking. In W. Gutkowski & T. Kowalewski (Eds.), Proc. 21st InternationalConference on Theoretical and Applied Mechanics.

317. Massart, T., Peerlings, R., & Geers, M. (2004). Applications of the multi-level FEM tostructural masonry computations. In B. Topping & C. Mota Soares (Eds.), Proc. 7thInternational Conference on Computational Structures Technology (CST2004).

318. Geers, M., Massart, T., Kouznetsova, V., & Peerlings, R. (2004). Two-scale continuous-discontinuous modelling of damaging materials. In W. Brekelmans, P. Vermeer, W. Ehlers,H. Herrmann, & E. Ramm (Eds.), Proc. 2nd International Symposium on Continuous andDiscontinuous Modelling of Cohesive Frictional Materials (CDM2004).

319. Bouillard, P., Mertens, T., & Massart, T. (2004). Numerical modeling of wave propagationin the medium frequency range: overview and trends. Proceedings of the 7th InternationalConference on Computational Structure Technology.

320. Hazard, L., De Bel, E., Bouillard, P., Sener, J.-Y., & Migeot, J.-L. (2004). Design ofviscoelastic damping treatments in the medium frequency range. Proceedings of ISMA29,International Conference on Noise and Vibration Engineering.

321. Kireeva, O., Mertens, T., & Bouillard, P. (2004). A meshless formulation for acousticalradiation. Proceedings of ISMA29, International Conference on Noise and VibrationEngineering.

-

12-03-2013 /45

322. De Bel, E., & Bouillard, P. (2004). Wave oriented meshless formulations for mediumfrequency 3D vibro-acoustic simulations. Proceedings of ECCOMAS2004.

323. Duchateau, V., Persenaire, E., Postiaux, N., & Bouillard, P. (2004). Evaluation d'unepremière expérience de pédagogie active dans la formation d'ingénieur et pistesd'approfondissements de réforme pédagogique. Congrès AIPU.

2003324. Ladevèze, P., Deraemaeker, A., Le Loch, S., Puel, G., Romeuf, T., & Ma, K. M. (2003,

septembre). Validation of structural dynamics models with uncertainties. InternationalConference on Adaptive Modeling and Simulation (ADMOS 2003).

325. Ladevèze, P., & Deraemaeker, A. (2003, juillet). Constitutive relation error for dynamicsmodel validation with uncertainties. 7th US National Congress on ComputationalMechanics.

326. Puel, G., Ladevèze, P., Deraemaeker, A., & Barthe, D. (2003, mai). Sur une théorie desméconnaissances en calcul des structures. Sixième Colloque National en Calcul desStructures. Teknea.

327. Barthe, D., Deraemaeker, A., & Ladevèze, P. (2003, avril). Validation of dynamics modelswith uncertainties based on the constitutive relation error. VII International Conference onComputational Plasticity (COMPLAS 2003).

328. Deraemaeker, A. (2003, mars). Vers une méthode de validation et de recalage robuste endynamique des structures. Journée d'étude F2AS : Recalage Calculs/Mesures.

329. Barthe, D., Deraemaeker, A., Ladevèze, P., & Puel, G. (2003, février). On a theory ofquantification of the lack of knowledge (lok) in structural computation. Proceedings IMACXXI.

330. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2003). Validation ofAcoustic Models Based on the Error in Constitutive Relation. International Conference onAdaptive Modelling and Simulation, ADMOS03.

331. Filomeno Coelho, R., Bersini, H., & Bouillard, P. (2003). PAMUC: A multicriteriaoptimization method applied to the design of a purge valve. ADMOS 2003 - Proceedingsof the First International Conference on Adaptive Modeling and Simulation, ChalmersUniversity of Technology, Göteborg, Sweden, September 29 - October 1. CIMNE.

332. Filomeno Coelho, R., Bersini, H., & Bouillard, P. (2003). Multiobjective Optimization of aPurge Valve Using a Genetic Algorithm. International Conference on Adaptive Modellingand Simulation, ADMOS03.

333. Gottcheiner, S., Massart, T., & Bouillard, P. (2003). A homogenization method for periodicplane masonry with account for mesoscopic 3D effects. Proceedings of 6th NationalCongress on Theoretical and Applied Mechanics.

-

12-03-2013 /45

334. Vandaele, V., Lambert, P., Delchambre, A., & Bouillard, P. (2003). Design andImplementation of a Flexible Guiding System in Translation. MicroNano Integration (pp.293-295).

335. Chau, A., Lambert, P., Bouillard, P., & Delchambre, A. (2003). Behaviour of FlexibleHinges for Use as Articulations in High Precision Mechanisms. MicroNano Integration (pp.287-288).

336. De Bel, E., & Bouillard, P. (2003). An EFG-PUM coupling for solving 2D Vibro-Acousticsproblems in the mid-frequency domain. ICSV10, International Conference on Sound andVibration.

337. Decouvreur, V., De Bel, E., & Bouillard, P. (2003). Updating acoustic models using theconstitutive relation error: effect of the discretization error. Proceedings of 6th NationalCongress on Theoretical and Applied Mechanics.

2002338. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2002, septembre). The

constitutive relation error as a tool to determine the acoustic admittance coefficient. ISMA26-International Conference on Noise and Vibration Engineering (pp. 2199-2206).

339. Deraemaeker, A., Ladevèze, P., Le Loch, S., & Barthe, D. (2002, septembre). Detectionand recovery of erroneous experimental information used for a dynamic model updating.ISMA 26-International Conference on Noise and Vibration Engineering (pp. 1087-1096).

340. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2002, juillet). Validationof acoustic models based on the Constitutive Relation Error. World Congress onComputational Mechanics.

341. Ladevèze, P., Deraemaeker, A., Le Loch, S., & Barthe, D. (2002, juillet). Error estimatorfor validation of structural models. World Congress on Computational Mechanics.

342. Ladevèze, P., Deraemaeker, A., & Leconte, P. (2002, juin). Model size reduction for theCRE model updating method applied to a mirror structure. International Conference onStructurql Dynamics Modelling.

343. Ladevèze, P., Deraemaeker, A., Le Loch, S., & Barthe, D. (2002, avril). A validationmethod of dynamic structural models: Basic aspects and applications. Quality Assessmentof Numerical Simulations in Engineering.

344. Deraemaeker, A., & Ladevèze, P. (2002, février). Reduction techniques applied to theCRE model updating method. Proceedings IMAC XX.

345. Decouvreur, V., Bouillard, P., Deraemaeker, A., & Ladevèze, P. (2002). Validation ofAcoustic Models Based on the Error in Constitutive Relation. ISMA27, InternationalConference on Noise and Vibration Engineering.

346. Filomeno Coelho, R., Bouillard, P., & Bersini, H. (2002). Multiobjective optimization of apurge valve using a genetic algorithm. WCCM 5 - Proceedings of the Fifth World Congresson Computational Mechanics, Vienna University of Technology, Austria, July 7-12.

-

12-03-2013 /45

347. Nott, M., Filomeno Coelho, R., & Remouchamps, A. (2002). Automated valve design.Proceedings of the Fourth International Conference on Launcher Technology, SpaceLauncher Liquid Propulsion, Liège, Belgium, December 3-6.

348. Massart, T., Bouillard, P., Geers, M., & Peerlings, R. (2002). Representation of anisotropicdamage in masonry material. In H. Mang, F. Rammerstorfer, & J. Eberhardsteiner (Eds.),Proc. 5th World Congress on Computational Mechanics (WCCM V).

349. Massart, T., Peerlings, R., Geers, M., & Bouillard, P. (2002). Anisotropic damage effectsin masonry walls. In S. Cescotto (Ed.), 6th European Mechanics of Materials Conference(EMMC6 Euromech - MECAMAT) on Non-linear mechanics of anisotropic materials (pp.149-156).

350. Massart, T., Peerlings, R., & Geers, M. (2002). Representation of anisotropic damage inmasonry material. Proceedings of the 5th Dutch Engineering Mechanics Symposium.

351. Bouillard, P. (2002). Conclusions du colloque. In Y. Rammer & P. Bouillard (Eds.), Actesdu colloque "Prévention des risques professionnels sur les chantiers".

352. De Bel, E., & Bouillard, P. (2002). A Coupled Partition of Unity: Element-Free GalerkinMethod for 2D Vibro-Acoustics. ISMA27, International Conference on Noise and VibrationEngineering.

353. Lacroix, V., & Bouillard, P. (2002). 3D Acoustic Analysis Using an Iterative MultilevelMeshless Method. ISMA27, International Conference on Noise and Vibration Engineering.

354. Lacroix, V., & Bouillard, P. (2002). 3D Acoustic Analysis Using an Iterative MultilevelMeshless Method. In H. A. Mang, F. Rammerstorfer, & J. Eberhardsteiner (Eds.),Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V). ViennaUniversity of Technology.

355. De Bel, E., & Bouillard, P. (2002). A Coupled Partition of Unity: Element-Free GalerkinMethod for 2D Vibro- Acoustics. In H. A. Mang, F. Rammerstorfer, & J. Eberhardsteiner(Eds.), Proceedings of the Fifth World Congress on Computational Mechanics (WCCM V).Vienna University of Technology.

2001356. Deraemaeker, A., Le Loch, S., & Ladevèze, P. (2001, septembre). Application of an

updating method based on Constitutive Relation Error Estimators to the Garteur SM AG19 benchmark. International Conference on Structural System Identification (pp. 409-418).

357. Barthe, D., Deraemaeker, A., Ladevèze, P., & Le Loch, S. (2001, août). Application of adynamic model updating method based on a Constitutive Relation Error Estimator. 6th USNational Congress on Computational Mechanics.

358. Deraemaeker, A., & Ladevèze, P. (2001, mai). Sur la correction des erreurs dediscrétisation dans le recalage des modèles en dynamique. Cinquième Colloque Nationalen Calcul des Structures (pp. 115-122). Teknea.

-

12-03-2013 /45

359. Deraemaeker, A., & Ladevèze, P. (2001, février). Effect of the finite element discretisationon the dynamic model updating process. Proceedings IMAC XIX.

360. Massart, T., Bouillard, P., Geers, M., & Peerlings, R. (2001). A 2D anisotropic damagemodel for masonry walls. 2nd European Conference on Computational Mechanics(ECCM2001).

361. De Bel, E., & Bouillard, P. (2001). A Timoshenko beam under forced vibrations solved bythe Partition of Unity Method. ECCM2001.

362. Lacroix, V., & Bouillard, P. (2001). 3D Structural optimization with error control.ECCM2001.

2000363. Deraemaeker, A., Ladevèze, P., Collard, E., & Leconte, P. (2000, septembre). Modeling

and identification of joints parameters: application to bolted plates. ISMA 25-InternationalConference on Noise and Vibration Engineering.

364. Chouaki, A., Deraemaeker, A., Ladevèze, P., & Le Loch, S. (2000, février). Modelupdating using the Error in the Constitutive Relation: Real case study. Proceedings IMACXVIII (pp. 140-146).

365. Massart, T., Geers, M., & Bouillard, P. (2000). Endommagement et localisation pourmatériaux orthotropes. Proceedings of 5th National Congress on Theoretical and AppliedMechanics (pp. 187-190).

366. Lacroix, V., Suleau, S., & Bouillard, P. (2000). Element-Free Galerkin method applied toacoustics: multi-processors assembly algorithm. ISMA25, International Conference onNoise and Vibration Engineering (pp. 1457-1470).

367. Bouillard, P., & Irimie, S. E. (2000). Efficiency of A Residual a posteriori Error Estimator forthe Finite Element Solution of the Helmholtz Equation. ECCOMAS2000.

368. Lacroix, V., & Bouillard, P. (2000). Adaptation de maillage en optimisation de structure.Proceedings of 5th National Congress on Theoretical and Applied Mechanics (pp.303-306).

369. Suleau, S., & Bouillard, P. (2000). Méthode d'approximation nodale en acoustique etanalyse de l'erreur de dispersion. Proceedings of 5th National Congress on Theoreticaland Applied Mechanics (pp. 151-154).

370. Lacroix, V., Suleau, S., & Bouillard, P. (2000). Parallélisation de l'assemblage pour laméthode d'approximation nodale en acoustique. Proceedings of 5th National Congress onTheoretical and Applied Mechanics (pp. 143-146).

1999371. Chouaki, A., Deraemaeker, A., Ladevèze, P., & Le Loch, S. (1999, décembre).

Constitutive Relation Error estimators in dynamic model updating of dissipative structures.1st european conference on launch vehicle technology.

-

12-03-2013 /45

372. Chouaki, A., Deraemaeker, A., & Ladevèze, P. (1999, septembre). A comparison of aposteriori Constitutive Relation Errors for damping updating. Euromech 401.

373. Deraemaeker, A., Babuska, I., & Bouillard, P. (1999, septembre). A generalized methodfor the dispersion analysis of finite element solutions for the Helmholtz equation. EuropeanConference on Computational Mechanics.

374. Deraemaeker, A., Babuska, I., & Bouillard, P. (1999, mai). Méthode généralisée pourle calcul de la dispersion des solutions numériques en acoustique. Quatrième ColloqueNational en Calcul des Structures (pp. 277-282). Teknea.

375. Deraemaeker, A., Babuska, I., & Bouillard, P. (1999). A generalized method for thedispersion analysis for finite element solutions of the Helmholtz equation. ECCM99,European Conference on Computational Mechanics.

376. Suleau, S., & Bouillard, P. (1999). Dispersion analysis for the element-free Galerkinmethod. ECCM99, European Conference on Computational Mechanics.

1998377. Bouillard, P., & Suleau, S. (1998). Numerical computation of waves: a meshless

alternative. ISMA23, International Conference on Noise and Vibration Engineering, II (pp.551-558).

378. Bouillard, P., & Suleau, S. (1998). A 2D meshless method for acoustics. In S. Idelsohn,E. Oñate, & E. Dvorkin (Eds.), COMPUTATIONAL MECHANICS: New Trends andApplications.

1997379. Bouillard, P., & Ihlenburg, F. (1997). Error control for finite element solutions of Helmholtz

equation. Proceedings of the 15th IMACS World Congress on Scientific Computation,Modelling and Applied Mathematics, 3 (pp. 413-418).

380. Bouillard, P., & Saint-Georges, P. (1997). Méthodes d'interpolation nodale enélastostatique. Proceedings of 4th National Congress on Theoretical and AppliedMechanics (pp. 409-412).

381. Bouillard, P., & Absil, C. (1997). Estimation d'erreur a posteriori pour les analysesdynamiques par éléments finis. Proceedings of 4th National Congress on Theoretical andApplied Mechanics (pp. 201-204).

1996382. Bouillard, P., Allard, J.-F., & Warzée, G. (1996). Quality Assessment of the Acoustic

Velocity Field for General Finite Element Meshes. Proceedings of ISMA21, InternationalConference on Noise and Vibration Engineering (pp. 1619-1630).

383. Bouillard, P., Allard, J.-F., & Warzée, G. (1996). Enhanced Superconvergent PatchRecovery Technique in Acoustics. In J.-A. Désidéri, P. Le Tallec, E. Oñate, J. Periaux, &E. Stein (Eds.), Numerical Methods in Engineering '96 (pp. 72-78). Wiley&Sons.

-

12-03-2013 /45

384. Bouillard, P., & Warzée, G. (1996). A Posteriori Error Estimation in Constitutive Lawfor Acoustic Finite Element Analyses. In B. Topping (Ed.), Advances in Finite ElementTechnology (pp. 55-60). Civil-Comp Press.

1995385. Bouillard, P., Allard, J.-F., & Roger, M. (1995). Analysis of the Acoustic Power Inside a

Bus. Proceedings of 2nd Worldwide SYSNOISE Users Meeting.

386. Bouillard, P., & Allard, J.-F. (1995). Reduction of Noise Perception Inside the Vertigo.Proceedings of 2nd Worldwide SYSNOISE Users Meeting.

1990387. Warzée, N., Warzée, G., & Van Rolleghem, J. (1990, novembre). Image processing and

Application of CAD to the manufacture of prostheses. Image'COM 90 (pp. 354-357).

1989388. Van Rolleghem, J., Warzée, G., Warzée, N., Vis, J., Vanderlinden, J., & Cremer, J. (1989,

novembre). CAD / CAM in Prosthetics and Orthotics. International Society for Prostheticsand Orthotics (p. 10).

389. Warzée, G., Warzée, N., Vis, J., & Cremer, J. (1989, février). Application de la CAO. Laconception et la fabrication de prothèses et d'orthèses. Actes du MICAD 89 (p. 14).

Sans date390. Tondreau, G., & Deraemaeker, A. (s.d.). Multi-scale modal filters for early damage

localization. ISMA 2012.

https://dipot.ulb.ac.be/dspace/bitstream/2013/126894/1/multiScaleFiltersV2.pdf

Rapports de recherche, comptes rendus, lettres à l'éditeur, workingpapers (27)

2013391. Filomeno Coelho, R. (2013). Optimisation multicritère avec prise en compte des

incertitudes (en variables continues et discrètes) appliquée aux constructions.

2010392. Dechamps, Y., Bouillard, P., & Rammer, Y. (2010). Analyse critique de l'option

d'implantation de nouveaux immeubles-tours.

https://dipot.ulb.ac.be/dspace/bitstream/2013/69002/1/ULB DECHAMPS Yves -Rapport d_avancement formation doctorale 2010.pdf

393. Filomeno Coelho, R., & Bouillard, P. (2010). Optimisation sectionnelle de l'arc d'un pontbow-string (Nijmegen) avec prise en compte du comportement non linéaire (II).

2009394. Filomeno Coelho, R., & Bouillard, P. (2009). Optimisation sectionnelle de l'arc d'un pont

bow-string (I).

2005

-

12-03-2013 /45

395. Menchel, K., & Bouillard, P. (2005). Etude de l'effet voûte dans une dalle en béton defibres.

2004396. Filomeno Coelho, R., & Bouillard, P. (2004). Etude de détail pour l’ossature métallique du

palais 3 Heysel.

397. Filomeno Coelho, R., & Bouillard, P. (2004). Optimisation de forme d'une passerelle(Knokke).

398. Filomeno Coelho, R. (2004). Moteur d'inférence pour l'optimisation de structures (MINOS).

399. Melchor Blanco, C., & Bouillard, P. (2004). Affaire Collegebrug: étude de l'actiondynamique de piétons sur une passerelle à Courtrai.

2002400. Bouillard, P., & Massart, T. (2002). Affaire Laurentide: calcul des fréquences et modes

propres.

2001401. Bouillard, P., Massart, T., Mallié, M., & Lacroix, D. (2001). Analyse de l'effondrement du

pont Vivegnis.

402. Rammer, Y., & Bouillard, P. (2001). Evaluation globale des risques structuraux: applicationaux immeubles de grande hauteur.

2000403. Rammer, Y., & Bouillard, P. (2000). Berlaymont: étude de l'effondrement en cascade

(progressive collapse).

404. Bouillard, P., & Absil, C. (2000). Finite element analysis of U-bolts.

1999405. Bouillard, P., Massart, T., & Saadé, K. (1999). Berlaymont: étude globale de la poussée

des terres.

406. Bouillard, P., Massart, T., Michotte, P., & Ronsmans, A. (1999). Étude d'une installationILS de l'aéroport de Bierset.

407. Bouillard, P., Massart, T., & Absil, C. (1999). Project Front Air Suspension Panhard RodAnchorage #480.

1998408. Bouillard, P., Massart, T., & Absil, C. (1998). Project Shock Absorber #495.

1997409. Bouillard, P. (1997). Modernisation du canal du Centre: pont canal à Houdeng-Aime.

1996

-

12-03-2013 /45

410. Bouillard, P., Placet, B., Meyers, M., & Hazard, L. (1996). Project Engine Mounting 1.

411. Bouillard, P., & Offermans, N. (1996). Étude par éléments finis de l'état de contraintesd'une pièce métallique.

1995412. Steinfeld, L., Allard, J.-F., Bouillard, P., & Warzée, G. (1995). Analyse des contraintes par

éléments finis de type coque à l'aide des logiciels I-DEAS et SAMCEF d'une tour tripodeen béton précontraint (réseau GSM de Belgacom).

Sans date413. Massart, T., & Pardoen, T. (s.d.). Flow properties of multi-phase polycrystals with evolving

confinement strain gradient plasticity – application to DP steels.

414. Menchel, K., Massart, T., & Bouillard, P. (s.d.). Identification of progressive collapsepushover loads based on a kinetic energy criterion.

415. Santafé, B., Massart, T., Berke, P., Bouillard, P., & Vantomme, J. (s.d.). Rate effects instructural progressive collapse computations of RC frames.

416. Berke, P., & Massart, T. (s.d.). Rate dependent friction and surface roughness in shallowdepth nano-indentation.

417. Bouillard, P., Placet, B., Meyers, M., & Hazard, L. (s.d.). Project Engine Mounting 2.

Participations à des congrès et colloques internationaux (38)

2011418. Raman, S., Tondreau, G., & Deraemaeker, A. (2011). Triangular piezocomposite

transducers for point load actuation. Publication présentée à la conférence ISPA2011(Sept 2011: Dresden, Germany).

419. Hashemi Afrapoli, M. A., Sonon, B., Francois, B., Massart, T., & Verbrugge, J.-C. (2011).Mechanical properties of sand-bentonite mixture stabilized with lime. Poster présenté à laconférence 22th ALERT Workshop.

420. Sonon, B., Francois, B., & Massart, T. (2011). A level-set based multi-scale computiationalmodelling of soil lime-treatment processes. Publication présentée à la conférenceInternational conference on computational modelling of fracture and failure of materialsand structures(Barcelona).

421. Sonon, B., Hashemi Afrapoli, M. A., Francois, B., & Massart, T. (2011). Modelling oflime treatement effect of soils using level set enhanced computational tools. Publicationprésentée à la conférence 22th ALERT Workshop.

422. Bouillard, P. (2011). Internal quality management at the Université Libre de Bruxelles.Publication présentée à la conférence Tempus Ukrainian National Conference(Kiev,Ukraine).

-

12-03-2013 /45

423. Bouillard, P., Canter, S., & Rosier, L. (2011). Internal quality management at the UniversitéLibre de Bruxelles. Publication présentée à la conférence Lebanon National Conference,"Towards a Comprehensive System for Quality Assurance of Higher Education inLebanon"(Beirut, Lebanon).

424. Bouillard, P., Canter, S., & Rosier, L. (2011). Strategic orientation of HEIs to pass fromquality assurance system versus quality management system. Publication présentée à laconférence Tempus Regional Seminar "HE in Western Balkans: Quality Assurance andAccreditation"(Tirana, Albania).

2010425. Le Riche, R., & Filomeno Coelho, R. (2010). Le projet ANR/RNTL/OMD (Optimisation

Multi-Disciplinaire). In Grand Colloque STIC (Sciences et Technologies de l'Information etde la Communication), Centre des congrès de la Cité des Sciences et de l'Industrie, Paris,France, January 5-7.

426. Bouillard, P. (2010). Introduction to the discussion group: Targeted RecruitmentCampaigns (info & social inclusion policies). Publication présentée à la conférenceSeminar for Bologna and Higher Education Reform Experts: the social dimension of HE,building excellence & equity(Nicosia, Cyprus).

2009427. Filomeno Coelho, R., & Bouillard, P. (2009). Multiobjective evolutionary optimization

under uncertainty applied to civil engineering. In SLS 2009 - Engineering Stochastic LocalSearch Algorithms - Designing, Implementing and Analyzing Effective Heuristics, ULB,CoDE-IRIDIA, Brussels, Belgium, September 3-5.

2008428. Le Riche, R., Filomeno Coelho, R., Breitkopf, P., & Knopf-Lenoir, C. (2008). Projet OMD :

Optimisation Multi Disciplinaire - Concepts et application à une aile d'avion. In GrandColloque STIC (Sciences et Technologies de l'Information et de la Communication), LaVillette, Paris, France, November 5-7.

429. Filomeno Coelho, R., Breitkopf, P., & Knopf-Lenoir, C. (2008). Bi-level model reductionstrategy for the shape optimization of shell structures interacting with transonic flow. InVirtual Prototyping for Design and Fabrication, 5th Seminar, Xi'an, China, April 8-10.

430. Bouillard, P., Menchel, K., Santafe Iribarren, B., & Massart, T. (2008). Non-linear staticand dynamic simulation methods for progressive collapse. Publication présentée à laconférence GrasMech Poster Day(Royal Military School, Brussels).

2007431. Tam, E., Berke, P., Massart, T., & Delplancke, M.-P. (2007, octobre). Nanoindentation rate

dependent mechanical properties of nickel and titanium. Poster présenté à la conférenceAVS 54th International Symposium & Exhibition(14-17 Octobre 2007: Seattle, USA).

432. Filomeno Coelho, R., Breitkopf, P., & Knopf-Lenoir, C. (2007). Reduced models formultilevel optimization strategies - Application to a 2D wing. In Virtual Prototyping forDesign and Fabrication, 4th seminar, Compiègne, France, July 11-13.

-

12-03-2013 /45

433. Filomeno Coelho, R., Breitkopf, P., & Knopf-Lenoir, C. (2007). Modèles réduits pourl'optimisation de problèmes couplés fluide-structure. In Journée thématique CSMA -Nouvelles tendances en optimisation de structures dans un contexte multidisciplinaire,Université de Technologie de Compiègne, March 30.

434. Berke, P., Tam, E., Massart, T., & Delplancke, M.-P. (2007). Coupled experimental-numerical rate-dependent analysis of conical nanoindentation on pure nickel. Posterprésenté à la conférence AVS 54th International Symposium and Exhibition(14-19 October2007: Seattle (USA)).

435. Santafe Iribarren, B., Massart, T., Bouillard, P., & Vantomme, J. (2007). Modelling ofRC Structures for Progressive Collapse Simulation. Poster présenté à la conférenceSymposium "Mooi Bedacht, Nuttig Toegepast"(ERM, Bruxelles).

436. Bouillard, P. (2007). Meshless and high order methods for acoustical and vibroacousticalproblems. Publication présentée à la conférence Workshop on Solution Methodologies forDirect and Inverse Scattering Problems: Recent Progress and Trends(Pau, France).

2006437. Filomeno Coelho, R. (2006). Optimization based on evolutionary algorithms for

aeronautics. In CORE Symposium on Optimization and Engineering, Louvain-la-Neuve,Belgium, May 24.

438. Bouillard, P. (2006). Some challenges in computational vibro-acoustics: verification,validation and medium frequencies. Publication présentée à la conférence Workshopon Challenges in Computational Mechanics, P. Ladevèze's 60th anniversary(Cachan,France).

2005439. Filomeno Coelho, R., Bouillard, P., & Pierret, S. (2005). Multicriteria evolutionary

algorithms for design optimization. In Virtual Concept International Conference 2005,Recent Techniques for Supporting Decision-Making and Ensuring Product Innovation,Espace Bellevue, Biarritz, France, November 8-10.

440. Jannot, F., Ferracin, T., Pierret, S., Filomeno Coelho, R., De Vuyst, T., & d'Alvise, L.(2005). Identification of HDPE rate dependent material model and its use for the simulationof failure in HDPE fuel tanks. In Abaqus Users' Meeting, November 16-17.

2003441. Deraemaeker, A. (2003, mars). Vers une méthode de validation et de recalage robuste en

dynamique des structures. Publication présentée à la conférence Journée d'étude F2AS :Recalage Calculs/Mesures(Paris, France).

442. Chalhoub, M., Bouillard, P., Verbrugge, J.-C., & Temsah, Y. (2003). Etude ducomportement statique et dynamique d'un pieu isolé implanté dans le sable par élémentsfinis. Publication présentée à la conférence CIMNA1(Beirut, Liban).

443. Bouillard, P. (2003). Engineering the Architecture. Publication présentée à la conférenceTensiNet Symposium(Brussels).

2002

-

12-03-2013 /45

444. Filomeno Coelho, R., Bouillard, P., & Bersini, H. (2002). A reliable multiobjectiveoptimization algorithm applied to the design of a purge valve. In QUANSE - InternationalCongress on Quality Assessment of Numerical Simulations in Engineering, University ofConcepción, Chile, April 9-12.

2001445. Bouillard, P., Lacroix, V., & Villon, P. (2001). Iterative multilevel meshless method for

acoustics. Publication présentée à la conférence US National Congress on ComputationalMechanics(Michigan, USA).

446. Lacroix, V., Bouillard, P., & Villon, P. (2001). Méthode multi-échelle par moindrescarrés mobiles pour l'acoustique. Publication présentée à la conférence CongrèsSMAI(Pompadour, France).

447. Lacroix, D., & Bouillard, P. (2001). 3D Structural optimization with error control. Publicationprésentée à la conférence European workshop on computational mechanics : errorassessment and adaptivity in finite elements. Quality control of engineering outputs andcomplex problems(Barcelona, Spain).

448. De Bel, E., & Bouillard, P. (2001). On the choice of appropriate meshless formulations for1D vibro-acoustics. Publication présentée à la conférence Workshop CSMA, journée sur lamodélisation des structures avec des méthodes sans maillage(Compiègne, France).

449. Lacroix, V., Bouillard, P., & Villon, P. (2001). Towards a multiscale Element-Free Galerkinformulation for acoustics. Publication présentée à la conférence Workshop CSMA, journéesur la modélisation des structures avec des méthodes sans maillage(Compiègne, France).

2000450. Bouillard, P. (2000). Can the pollution error be controlled in acoustic finite element

computations ? Publication présentée à la conférence European workshop on Local errorand robustness indicators for finite element solutions(Brussels, Belgium).

1999451. Suleau, S., & Bouillard, P. (1999). Accurate acoustic computations using a meshless

method. Publication présentée à la conférence Workshop on Trefftz methods(Lisbon,Portugal).

1998452. Bouillard, P. (1998). Adaptive finite element analysis in acoustics. Publication présentée à

la conférence WCCM(Buenos Aires, Argentine).

1997453. Bouillard, P., & Ihlenburg, F. (1997). Error estimation and adaptivity for the finite element

solution in acoustics. Publication présentée à la conférence Workshop "On New Advancesin Adaptive Computational Methods in Mechanics"(Cachan, France).

1996454. Bouillard, P., Allard, J.-F., & Warzée, G. (1996). A Posteriori Error Estimation for the

Finite Element Solution of the Helmholtz Equation. Publication présentée à la conférence

-

12-03-2013 /45

International Conference on the Mathematics of Finite Elements and Applications(MAFELAP)(Uxbridge, Grande-Bretagne).

455. Bouillard, P. (1996). Error Analysis of Finite Element Solutions for the HelmholtzEquation. Publication présentée à la conférence Congrès National de la Société Belge dePhysique(Bruxelles, Belgique).

Thèses et mémoires (5)

2004456. Filomeno Coelho, R. (2004). Multicriteria Optimization with Expert Rules for Mechanical

Design (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-03122004-081932/unrestricted/PhD_Rajan_FILOMENO_COELHO_Texte_complet.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-03122004-081932/unrestricted/PhD_Rajan_FILOMENO_COELHO_Table_des_matieres.pdf

2003457. Massart, T. J. (2003). Multi-scale modeling of damage in masonry walls (Thèse doctorale

non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-140925/unrestricted/TJMASSART_PhD.pdf

2002458. Filomeno Coelho, R. (2002). Optimisation d'une vanne de purge par algorithmes

génétiques (Mémoire non-publié). Bruxelles, Belgique: Université Libre de Bruxelles.

2000459. Filomeno Coelho, R. (2000). Etude expérimentale du comportement géomécanique d'une

argile sèche (Mémoire non-publié). Bruxelles, Belgique: Université Libre de Bruxelles.

1997460. Bouillard, P. (1997). Méthodes de contrôle de la qualité de solutions éléments finis

(application à l'acoustique) (Thèse doctorale non-publiée). Universite Libre de Bruxelles,Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/09_chapitre7-3.PDF

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/10_conclusions.PDF



http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/06_chapitre6.PDF




















-

12-03-2013 /45




http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/01_introduction.PDF

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/00_preface.PDF

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-07112005-114016/unrestricted/11_annexes.PDF

Divers (3)

2012461. Filomeno Coelho, R. (2012). Reliability of Structures and Materials.

462. Tysmans, T., & Filomeno Coelho, R. (2012). Form-finding and Structural Optimisation.

2011463. Filomeno Coelho, R. (2011). Fiabilité des structures et des matériaux. Bruxelles, Belgique:

Presses Universitaires de Bruxelles.

Direction de thèses (11)

2011464. Santafé Iribarren, B. (2011). Progressive Collapse Simulation of Reinforced Concrete

Structures: Influence of Design and Material Parameters and Investigation of the StrainRate Effects (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-06212011-145033/unrestricted/SantafePhDreport.pdf

2010465. Mazzoni, L. (2010). Strain gradient based analysis of transformation induced plasticity in

multiphase steels (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-02252010-142137/unrestricted/PhD_Louise_Mazzoni.pdf

466. Postiaux, N. (2010). Référentiels de compétences et pilotage de formation à l'université.Rôle, enjeux et limites/Competences Framework and Conducting University Training.Role, Stakes and Limits. (Thèse doctorale non-publiée). Universite Libre de Bruxelles,Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-11132009-113424/unrestricted/ThesePostiauxdiffusionBictel.pdf



















-

12-03-2013 /45

467. Mercatoris, B. (2010). Multi-scale modelling of shell failure for periodic quasi-brittlematerials (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-01052010-173736/unrestricted/PhD_BMercatoris_20100103.pdf

2009468. Vandeveld, T. (2009). Etude expérimentale multisensorielle de la dynamique des impacts

d'oiseaux sur structures d'avions (Thèse doctorale non-publiée). Universite Libre deBruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-09032009-081206/restricted/THESE_VANDEVELD.pdf

469. Mertens, T. (2009). A new mapped infinite partition of unity method for convectedacoustical radiation in infinite domains (Thèse doctorale non-publiée). Universite Libre deBruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre10_Annexes.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre9_Conclusions.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre8_Nacelle.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre7_Aliasing.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre1_Introduction.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre2_Formulation.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre3_Axi_verification.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre4_3D_verification.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre5_Axi_performances.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10302008-150136/unrestricted/Chapitre6_3D_performances.pdf

2008470. Berke, P. (2008). Numerical modeling of the surface and the bulk deformation in a

small scale contact. Application to the nanoindentation interpretation and to the micro-manipulation. (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-11062008-112746/unrestricted/PBerke_thesis_upload.pdf

471. Menchel, K. (2008). Progressive Collapse: Comparison of Main Standards, Formulationand Validation of New Computational Procedures (Thèse doctorale non-publiée).Universite Libre de Bruxelles, Brussels.



























-

12-03-2013 /45

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-09122008-165246/unrestricted/Progressive_collapse_comparison_of_main_standards_formulation_and_validation_of_new_computational_procedures.pdf

472. Decouvreur, V. (2008). Updating Acoustic Models : a Constitutive Relation Error Approach(Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10192007-162329/unrestricted/phd_decouvreur.pdf

2007473. Hazard, L. (2007). Design of viscoelastic damping for noise & vibration control: modelling,

experiments and optimisation (Thèse doctorale non-publiée). Universite Libre deBruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-12212006-101435/unrestricted/These_LHa_December_2006.pdf

2005474. Saadé, K. (2005). Finite Element Modeling of Shear in Thin Walled Beams with a Single

Warping Function (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-04132005-164714/unrestricted/PhD_Katy_SAADE_Table_des_Matieres.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-04132005-164714/unrestricted/PhD_katy_SAADE_Texte_complet.pdf

Participation aux jurys de thèse (8)

2011475. Mwepu Fyama, B. (2011). Développement d’une méthodologie d’échange des

métadonnées des objets numériques d’apprentissage pour une interopérabilité entreplates-formes d’elearning hétérogènes : cas de l’Université de Lubumbashi (R.D Congo)et ses partenaires belges. Development of a methodology of exchange of learning objectmetadata for interoperability between LMS, case of University of Lubumbashi and blgianpartners. (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-10182011-145636/unrestricted/These_Blaise_FYAMA.pdf

2010476. Antoine, P.-C. (2010). Etude des dalles sur sols renforcés au moyen d'inclusions rigides

ou non (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-01312011-134004/unrestricted/EDSRIRN_ANTOINE_2010.pdf

477. Ramos da Silva, M. (2010). Etude théorique et expérimentale du comportementporomécanique des roches non saturées (Thèse doctorale non-publiée). Universite Librede Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-06242010-043720/restricted/These_M_Ramos_da_Silva.pdf


















-

12-03-2013 /45

478. Bastaits, R. (2010). Extremely Large Segmented Mirrors: Dynamics, Control and ScaleEffects (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-06142010-115334/unrestricted/R_Bastaits_PhD_Thesis.pdf

2008479. Vandaele, V. (2008). Manipulation sans contact pour le micro-assemblage: lévitation

acoustique / Contactless handling for micro-assembly: acoustic levitation (Thèse doctoralenon-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-01032008-181114/restricted/Thesis_Vincent_Vandaele_electronic_part0.pdf





http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-01032008-181114/restricted/Thesis_Vincent_Vandaele_electronic_part5a.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-01032008-181114/restricted/Thesis_Vincent_Vandaele_electronic_part5b.pdf

2007480. Dobes, J. (2007). Numerical Algorithms for the Computation of Steady and Unsteady

Compressible Flow over Moving Geometries : Application to Fluid-Structure Interaction.Méthodes Numériques pour le calcul d'Ecoulements Compressibles Stationnaires etInstationnaires, sur Géometries Mouvantes : Application en Interaction Fluide-Structure.(Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-09152007-190641/unrestricted/thesis.pdf

481. Collette, C. (2007). Usure ondulatoire en transport ferroviaire: Mécanismes et réduction/Rail Corrugation in Railway Transport: Mechanism and Mitigation (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-06212007-161104/withheld/These_Collette_2007.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-06212007-161104/unrestricted/Table_These_Collette_2007.pdf

2006482. Germain, O. (2006). Contribution à l'analyse du comportement et au dimensionnement

des colonnes élancées en béton armé (Thèse doctorale non-publiée). Universite Libre deBruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-02152006-111856/unrestricted/2006-GERMAIN.pdf

























-

12-03-2013 /45

Président de jurys de thèse (3)

2013483. Buttafuoco, A. (2013). Design and Control of a Teleoperated Palpation Device for

Minimally Invasive Thoracic Surgery (Thèse doctorale non-publiée). Universite Libre deBruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-02262013-163143/unrestricted/TheseButtafuoco_versionFinale.pdf

2009484. Tam, E. (2009). Characterization and modification of the mechanical and surface

properties at the nanoscale (Thèse doctorale non-publiée). Universite Libre de Bruxelles,Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-12022009-101338/unrestricted/Thesis_TamEnrico.pdf

2004485. Staquet, S. (2004). Analysis and modelling of the delayed behaviour of concrete -

Application to composite precambered prestressed beams/Analyse et modélisationdu comportement différé du béton - Application aux poutres mixtes, préféchies etprécontraintes (Thèse doctorale non-publiée). Universite Libre de Bruxelles, Brussels.

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-09062004-164345/unrestricted/THESEtabledesmatieres.pdf

http://theses.ulb.ac.be/ETD-db/collection/available/ULBetd-09062004-164345/unrestricted/SSTAQUET01092004.pdf









Liste de publications de BATir-SMC Bouillard, P., … based on a triangular piezoelectric patch. ......

Documents

Transcript of Liste de publications de BATir-SMC Bouillard, P., … based on a triangular piezoelectric patch. ......