LISTA Shelving systems - TechPoint Systemteknik AB · LISTA_Shelving systems. 2 01/2007; © LISTA...

L I S TA _ Shelving systems

2 www.lista.com 01/2007; © LISTA 2007

OVERVIEW

Drawer systems

NC Storage and transport systems

Workstations

Clothes lockers and material cabinets

Shelf systems

> Drawer storage walls

> Shelving system 06

> Shelf storage walls M10

> Heavy-duty pull-out shelving system M210

> Pallet rackings

> Mobile shelving

> Sliding cabinets

> Stairs and Ladders

Dynamic storage technology

Office systems

ESD

Electronic locking systems and access control systems

Partition material

301/2007; © LISTA 2007 www.lista.com

Table of conTenT

Drawer storage wallsIntroduction 4

Drawer storage walls B251Introduction 6

Component parts 9

Drawer storage walls B251 with vertical pull-out storage unitIntroduction 26

Component parts 28

Drawer storage walls B255Introduction 42

Component parts 45

Lista Script labelling system 56


A drawer storage wall system which unites

all the benefits of drawer cabinets and shel-

ving systems. Drawers, pull-out shelves and

adjustable shelves can all be combined in

drawer storage walls. They can accommodate

different quantities, sizes, and kinds of parts.

Modifications can easily be carried out by

simply rearranging the individual units.

The versatility of the drawer storage walls

permits fittings which are compatible with

different systems of logistics. Whether used

for storage on a numerical basis or with data

processing systems, perfect organization is

always possible with drawer storage walls.

Lista, making workspace work.

DRAWER STORAGE WALLS

capri blueRAL 5019

light blueRAL 5012

reseda greenRAL 6011

ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035

metallic greyNCS S 6502-B

blackNCS S 9000-N

THE STANDARD COLOURSFor technical reasons, the printed colours shown here may differ from the original shades.


Vertical storage drawers, part heightFor careful, suspension storage of pre-set tools.

Vertical storage drawers, full heightFor careful, suspension storage of pre-set tools. Verticalstorage drawers can also be equipped with half-depthshelves, perforated panels and adjustable shelves.

Pull-out shelvesFor storing heavy individual parts and fixtures. Theinserted slats allow goods to be stored flush with thehandle and enable them to be withdrawn. Carryingcapacity when fully withdrawn is max. 200kg.

Heavy-duty extensionsUsed primarily in tool making for storing fixturesand tools. Heavy-duty extensions are easy to use, evenunder a heavy load. Available in sizes 36x36E and54x36E. Carrying capacity up to 350kg.

Adjustable shelvesPlain or slotted design for division with plain partitions.Adjustable shelves are suspended in the side frameswith bottom supports. Carrying capacity up to 200kg.

Side framesStrong vertical side frames provide extremely highdrawer storage wall load bearing capacity. The sideframes can be covered with a plain end panel at theend of a storage wall row.

Full extension storage drawersContinuous travelling telescopic drawer. 8 precisionsteel ball bearings and two support rollers guaranteesmooth running. Carrying capacity max. 200kg. Thedecisions whether to use normal extension or full ex-tension storage drawers depends on the nature andweight of the goods stored.

Shelf side panelsServe as end stop if space cannot be covered withintermediate fill-in strip.

SecurityRoller shutters, sliding doors and hinged doors canbe used for maximum security, depending on theapplication and requirements involved.

CounterWork surfaces in the form of service counters, inspec-tion and checking stations can be designed if required.

DRAWER STORAGE WALLS


Drawer storage walls for easily accessible

storage of small items and accessories. They

are the best guarantee of value preservation

and efficient use of high-grade materials.

Wide choice of drawers, extensions and

adjustable shelves available. May be freely

combined in a wall unit, to give the exact

functional mix for your operational needs.


DRAWER STORAGE WALLS B251

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



Dimensions B251

STORAGE DIMENSIONS

A Section widths Dimensions 714mm = 36 units 1190 mm = 64 units867mm = 45 units 1428 mm = 78 units

1020mm = 54 unitsB Storage depths Actual dimension 706mm for drawers 36 units deep

With hinged doors 756mmWith sliding doors 811mmWith roller-shutter 770mm

C Storage heights Actual dimensions 1000mm 1450mm 2000mm 2200mm 2500mm 3000 mmWith hinged doors 1000mm – 2000mm 2200mm 2500mm –With sliding doors – – 2000mm 2200mm 2500mm –With roller-shutter – 1773mm 2323mm 2523mm 2823mm –

D Useful heights Number of slots x 25mmE Storage lengths Without end panels = Number of section widths + 53mm

With end panels = Number of section widths + 10mmExample without end panels:3 x 714mm + 1 x 867mm + 1 x 1428mm + 53mm = 4490mm3 x 36 E + 1 x 45 E + 1 x 78 E + 53mm = 4490mm

Slots Pillar frame slotted every 25mm for the fitting of drawersShelves slotted every 15mm for partitioning.1 unit = 17mm


Planning information

Carrying capacities

Min. - max. CarryingStorage Number of Useful height of middle capacityheight universal heights universal shelves from base per storage sectionmm shelves mm mm kg1000 2 900 – 55001450 2 1350 – 50002000 2 1900 – 45002000 3 1850 800 – 1200 55002200 3 2050 900 – 1300 55002500 3 2350 1050 – 1450 52503000 3 2850 1300 – 1700 5000

• The shown load capacities are only valid if always first and every following thirdsection is equipped with rear panels or diagonal braces.

Securing requirementsAll drawer storage walls must be anchored. Ships with 1 anchoring per vertical sideframe.Exception: double-sided drawer storage walls that are screwed together back-to-back, no anchoring required.

• With double height shelving, diagonal braces or rear panels must be fitted inevery third shelving section on the lower level.

Diagonal brace arrangement

Add-on side rightBasic unit left Sliding door Hinged door Roller-shutter Counter Vertical extension 1 Locking profile 2

Sliding door • – • • • –Hinged door – • • • • –Roller-shutter • • • • • –Counter • • • – • –Vertical extension 1 – – – – • –Locking profile 2 – – – – • •Drawers 3 • • • – – •

Explanations: • possible – not possible1 Vertical extension only with locking on the right2 Locking profile is double sided3 For fitting behind front assembly

Front-mounting variantsImmediately adjacent front-mounting variants.

DRAWER STORAGE WALLS B251PLANNING INFORMATION / CARRYING CAPACITIES


drawer sTorage walls b251componenT parTs

Vertical side frames

Frames with holes on both sides in 25mm incrementsfor fitting runner rails and shelf supports. Vertical frontand rear channels are welded to horizontal braces toform rigid and stable side frame. If drawer safety lock-

ing devices are required, lock profiles must be boltedonto the vertical side frame (i.e. on mobile bases).Made of pressed steel profiles. Colour: according tocolour chart.

Standard

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

13.245 1000 900 706 5313.246 1450 1350 706 5313.247 2000 1900 706 5313.248 2200 2050 706 5313.249 2500 2350 706 5313.250 3000 2850 706 53

With locking profile*

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

14.341 1000 900 723 5314.342 1450 1350 723 5314.343 2000 1900 723 5314.344 2200 2050 723 5314.345 2500 2350 723 5314.346 3000 2850 723 53* Used in conjunction with drawer saftey catch

With self-supporting**

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

13.538 1000 900 706 5313.539 1450 1350 706 5313.540 2000 1900 706 5313.541 2200 2050 706 5313.542 2500 2350 706 5313.543 3000 2850 706 53** For later additional height or height over 3000mm


Rear panels

Rear panel for storage unit. Provides lateral stability.Rear panels are bolted to the side frames. Fasteners in-cluded. If desired, diagonal braces can be used insteadof rear panels for lateral stability.Specification: sheet steel. Colour: according to colourchart. Edge strip: anthracite RAL 7016.

Rear panels for basic units

Ref no.For section widthmm / E

For storage heightmm

Number of panels / panel meas.pieces / mm

13.258 714 / 36 1000 1 x 100013.259 714 / 36 1450 1 x 1000, 1 x 45013.260 714 / 36 2000 2 x 100013.261 714 / 36 2200 1 x 1000, 1 x 120013.262 714 / 36 2500 2 x 1000, 1 x 50013.263 714 / 36 3000 3 x 100012.241 867 / 45 1000 1x 100012.285 867 / 45 1450 1x 1000, 1x 45012.330 867 / 45 2000 2 x 100012.379 867 / 45 2200 1 x 1000, 1 x 120012.570 867 / 45 2500 2 x 1000, 1 x 50012.572 867 / 45 3000 3x 100013.372 1020 / 54 1000 1 x 100013.373 1020 / 54 1450 1 x 1000, 1 x 45013.374 1020 / 54 2000 2 x 100013.375 1020 / 54 2200 1 x 1000, 1 x 120013.376 1020 / 54 2500 2 x 1000, 1 x 50013.377 1020 / 54 3000 3 x 100013.265 1190 / 64 1000 1x 100013.266 1190 / 64 1450 1x 1000, 1x 45013.267 1190 / 64 2000 2x 100013.268 1190 / 64 2200 1x 1000, 1x 120013.269 1190 / 64 2500 2x 1000, 1x 50013.270 1190 / 64 3000 3x 100013.272 1428 / 78 1000 1x 100013.273 1428 / 78 1450 1x 1000, 1x 45013.274 1428 / 78 2000 2x 100013.275 1428 / 78 2200 1x 1000, 1x 120013.276 1428 / 78 2500 2x 1000, 1x 50013.277 1428 / 78 3000 3x 1000

Rear panels for add-on units




13.684 714 / 36 1000 1 x 100013.685 714 / 36 1450 1 x 1000, 1 x 45013.686 714 / 36 2000 2 x 100013.687 714 / 36 2200 1 x 1000, 1 x 120013.688 714 / 36 2500 2 x 1000, 1 x 50013.689 714 / 36 3000 3 x 100012.242 867 / 45 1000 1x 100012.302 867 / 45 1450 1x 1000, 1x 45012.378 867 / 45 2000 2 x 100012.380 867 / 45 2200 1 x 1000, 1 x 120012.571 867 / 45 2500 2 x 1000, 1 x 50012.573 867 / 45 3000 3x 100013.702 1020 / 54 1000 1 x 100013.703 1020 / 54 1450 1 x 1000, 1 x 45013.704 1020 / 54 2000 2 x 100013.705 1020 / 54 2200 1 x 1000, 1 x 120013.706 1020 / 54 2500 2 x 1000, 1 x 50013.707 1020 / 54 3000 3 x 100013.690 1190 / 64 1000 1x 100013.691 1190 / 64 1450 1x 1000, 1x 45013.692 1190 / 64 2000 2x 100013.693 1190 / 64 2200 1x 1000, 1x 120013.694 1190 / 64 2500 2x 1000, 1x 50013.695 1190 / 64 3000 3x 100013.696 1428 / 78 1000 1x 100013.697 1428 / 78 1450 1x 1000, 1x 45013.698 1428 / 78 2000 2x 100013.699 1428 / 78 2200 1x 1000, 1x 120013.670 1428 / 78 2500 2x 1000, 1x 50013.671 1428 / 78 3000 3x 1000


Rear panel holder

Ref no.13.264 714mm / 36E12.989 867mm / 45E13.378 1020mm / 54E13.271 1190mm / 64E13.278 1428mm / 78EFor later additional height or height over 3000mm.

Diagonals

To provide lateral stability where rear panels are notused. Fasteners included.Specification: galvanized steel.



13.285 714 / 36 1000 - 300012.175 867 / 45 100012.222 867 / 45 1450 - 300013.394 1020 / 54 100013.589 1020 / 54 1450 - 300014.355 1190 / 64 100013.286 1190 / 64 145013.552 1190 / 64 2000 - 300014.356 1428 / 78 100013.287 1428 / 78 145013.554 1428 / 78 2000 - 3000


Intermediate partitions

For later suspension in side frames. Used especially be-hind sliding doors, hinged doors and roller-shutters asanti-theft protection. Can be fitted on the right andleft side.Specification: sheet steel. Colour: according to colourchart.

Ref no.For storage heightmm

Frame depthmm Number of panels Number cross beams

18.708 1000 706 1 118.709 1450 706 1 118.702 2000 706 1 118.703 2200 706 2 218.704 2500 706 2 218.705 3000 706 3 3

Side panels

Side covering of storage system. The welded end pan-el provides stability and is fitted over the vertical sideframe with shelf support clips. Support clips included.Specification: sheet steel. Colour: according to colourchart.

Ref no.

For storageheightmm

Depthmm

Widthmm Number of panels

13.252 1000 706 23 113.253 1450 706 23 113.254 2000 706 23 113.255 2200 706 23 113.256 2500 706 23 213.257 3000 706 23 2

Levelling plates

We recommend using 3mm of plates per side frame(consisting of 1 x 1mm and 1 x 2mm).Specification: PVC. Colour: grey.

Ref no.Widthmm

Depthmm

Thicknessmm

17.140 134 60 117.141 134 60 217.142 134 60 4

Anchors

Ref no.103.362 Floor anchor M10 x 110Attention:All drawer storage walls must be anchored. Ships with 1 anchoring per vertical side frame. Exception: double-sided drawer storage walls that are screwed together back-to-back, no anchoring required.

Rear panel joint covers

Conceal rear panel joints and bolt heads on freestand-ing storage walls.Specification: sheet steel. Colour: according to colourchart.

Ref no.

For storageheightmm

Depthmm

Widthmm

13.279 1000 18 3613.280 1450 18 3613.281 2000 18 3613.282 2200 18 3613.283 2500 18 3613.284 3000 18 36


Universal panels

Universal shelves form the top, intermediate and baseconnections and are bolted to the vertical side frames.Fasteners included.Specification: sheet steel. Colour: according to colourchart.

Universal panels plain


Useful widthmm

Carryingcapacitykg

13.288 714 / 36 661 25012.033 867 / 45 814 25012.127 1020 / 54 967 25013.289 1190 / 64 1137 30013.290 1428 / 78 1375 350

Universal panels slotted


Useful widthmm

Carryingcapacitykg

13.736 714 / 36 661 25013.737 867 / 45 814 25013.738 1020 / 54 967 25013.745 1190 / 64 1137 30013.739 1428 / 78 1375 350Useful depth:705mmShelf depth: 50mm

Nut retainer

For fitting bolt-in shelves into sections where the sideframes are inaccessible. This is the case when the sideframe has a partition fitted and there is a counter im-mediately adjacent.Specification: sheet steel. Colour: bright galvanized. 2pcs per shelf next to partition.

Ref no.Lengthmm

16.997 55


Drawers

EA; VA

36x36E with standard model

Ref no.Front heightmm

Useful heightmm

Side / back heightmm

Carryingcapacitykg

13.960 50 EA 36 33 6013.961 75 EA 61 52 8013.962 75 VA 54 52 20013.963 100 EA 86 77 10013.964 100 VA 79 77 20013.965 125 EA 111 77 10013.966 125 VA 104 77 20013.967 150 EA 136 127 10013.968 150 VA 129 127 20013.969 175 VA 154 127 20014.084 200 EA 186 177 10013.970 200 VA 179 177 20013.972 250 VA 229 227 20013.973 300 VA 279 277 20013.975 400 VA 379 277 200

36x36E with safety catch on right


Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg

15.622 50 EA 36 33 6015.629 75 EA 61 52 8015.630 75 VA 54 52 20015.631 100 EA 86 77 8015.632 100 VA 79 77 20015.634 125 VA 104 77 20015.642 150 VA 129 127 20015.643 200 VA 179 177 20015.644 250 VA 229 227 20015.645 300 VA 279 277 200



Useful heightmm


Carryingcapacitykg





Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg

14.035 75 VA 54 52 20014.036 100 VA 79 77 20014.037 125 VA 104 77 20014.038 150 VA 129 127 20014.040 200 VA 179 177 20014.041 250 VA 229 227 20014.042 300 VA 279 277 200



Useful heightmm


Carryingcapacitykg

14.067 75 VA 54 52 20014.068 100 VA 79 77 20014.069 125 VA 104 77 20014.070 150 VA 129 127 20014.072 200 VA 179 177 20014.073 250 VA 229 227 20014.074 300 VA 279 277 200




Useful heightmm


Carryingcapacitykg

14.043 75 VA 54 52 20014.044 100 VA 79 77 20014.045 125 VA 104 77 20014.046 150 VA 129 127 20014.048 200 VA 179 177 20014.049 250 VA 229 227 20014.050 300 VA 279 277 200



Useful heightmm


Carryingcapacitykg

14.075 75 VA 54 52 20014.076 100 VA 79 77 20014.077 125 VA 104 77 20014.078 150 VA 129 127 20014.080 200 VA 179 177 20014.081 250 VA 229 227 20014.082 300 VA 279 277 200

Useful depth of drawers 612mm = 36 units of 17mmEA = Normal extension: 85 - 90% extension possible, max. Carrying capacity with evenly distributed loadVA = Total extension: 100% extension possible, the load-bearing capacity per drawer is max. 200kg. The op-erating manual must be observed for the loading and burden on drawers and drawer cabinetsThe front heights of all the drawers together should not exceed usable cabinet height.

Drawer safety catch on right

Ref no.13.902 For conversion: drawer safety catch on right

Blank labelsBlank labels, specially designed for use with the ListaScript labelling software, are available as A4 papersheets, for use with all popular PC printers.

Ref no.Label sizemm

Number of A4 sheets /number of labels

18.784 210 x 22 / 70 x 22 5 sheets = 50 / 150 labelsSoftware on the internet: www.lista.com/script

Pull out shelves

For storing heavy parts and machine attachments.Slats allow items to be stored flush with the handleand withdrawn. Vertical supports slotted at 25mm in-crements facilitate installation of shelves with normaland full extension, in any order. Construction is equiv-alent to a 75mm drawer with 50mm front height, incl.

full width protruding continuous handle with transpar-ent shield, labels and handle covers.Specification: sheet steel. Colour: according to colourchart. Slats made of sheet steel profile, sendzimir gal-vanized.

EA; VA


Min. build-in heightextensionmm

Useful widthmm

Carryingcapacitykg

13.330 714 / 36 75 EA 612 8013.331 714 / 36 75 VA 612 20012.227 867 / 45 75 EA 765 8012.228 867 / 45 75 VA 765 20012.229 1020 / 54 75 EA 918 8012.128 1020 / 54 75 VA 918 20013.342 1190 / 64 75 VA 1088 20013.352 1428 / 78 75 VA 1326 200Useful depth: 612mmCarrying capacity with evenly distributed loadEA = Normal extension: 80 - 90% extension possibleVA = Full extension: 100% extension possible


Ref no.Label sizemm


18.784 210 x 22 / 70 x 22 5 sheets = 50 / 150 labels


Software on the internet: www.lista.com/script

Adjustable shelves

Fit into vertical side frames with shelf support brack-ets. With reinforcing ribs welded on. Shelves availableplain or slotted. Slots at 15mm increments for insertionof dividers. Incl. 4 shelf supports.Specification: sheet steel. Colour: according to colourchart.

Adjustable shelves plain


Useful widthmm

Carryingcapacitykg

13.291 714 / 36 661 20012.231 867 / 45 814 20012.129 1020 / 54 967 20013.292 1190 / 64 1137 20013.293 1428 / 78 1375 200

Adjustable shelves slotted


Useful widthmm

Carryingcapacitykg

13.294 714 / 36 661 20012.240 867 / 45 814 20012.130 1020 / 54 967 20013.295 1190 / 64 1137 20013.296 1428 / 78 1375 200Useful depth of drawer: 701mmThickness 25mmCarrying capacity with evenly distributed load

Dividers

For the subdivision of slotted adjustable shelves.Specification: sheet steel. Colour: light grey RAL7035.

Ref no.For shelf depthmm

Heightmm

Depthmm

100.434 701 95 678100.435 701 145 678100.436 701 195 678


Bottom panels / Locking shelves

Same construction as universal panels, but equippedto accept locks. Fasteners included.Specification: sheet steel. Colour: according to colourchart.

S3 S2 F1 Ref no.For section widthmm / E Specification

Useful widthmm

Carryingcapacitykg

13.297 714 / 36 F1 66113.300 714 / 36 S2 661 20013.303 714 / 36 S3 66112.831 867 / 45 F1 81412.839 867 / 45 S2 814 20012.870 867 / 45 S3 81412.131 1020 / 54 F1 96712.132 1020 / 54 S2 967 20012.133 1020 / 54 S3 96713.298 1190 / 64 F1 113713.301 1190 / 64 S2 1137 20013.304 1190 / 64 S3 113713.299 1428 / 78 F1 137513.302 1428 / 78 S2 1375 20013.305 1428 / 78 S3 1375F1= Bottom panelS2 = Locking shelfS3 = Locking shelfShelf thickness: 50mmUseful depth: 705mmCarrying capacity with evenly distributed load

Intermediate fill-in strip

Covers gap between two shelves set at same height.Two retainers included.Specification: sheet steel. Colour: according to colourchart.

Ref no.Widthmm

Depthmm

13.354 52 597

Shelf fronts

Shelf fronts can be inserted into two lateral holders.Two socket pins prevent them from being accidentallyremoved.Specification: sheet steel. Colour: according to colourchart. Galvanized lateral holders.


Heightmm

16.667 714 / 36 10016.668 867 / 45 10016.669 1020 / 54 10016.670 1190 / 64 10016.671 1428 / 78 100order side and rear panel separately

Frame top covering

Conceals gap at top of vertical side frames.Specification: sheet steel. Colour: according to colourchart.

Ref no.Widthmm

Depthmm

13.355 53 706


Shelf end panels

End stop of shelves, if space cannot be covered with in-termediate fill-in strip.Specification: sheet steel. Colour: light greyRAL 7035.

Ref no.Heightmm

Depthmm

Min. useful shelf spacingmm

13.356 150 659 20013.357 200 659 25013.358 250 659 300

Heavy-duty extensions

Heavy-duty extensionsHeavy-duty extensions are extremely useful in the ma-chine and toolmaking industry for the storage of heavyequipment and tools. The heavy-duty extension is easyto use even when heavily loaded. The welded con-struction plus multiple ball bearing extension framesguarantee smooth functioning when heavily loaded.

The slide rails are constructed to fit into the uprightsupporting frames of the drawer cabinets and wallstorage units sizes 36x36 and 54x36 units.Specification: sheet steel profiles. Colour: grey NCS S4502-B.

Ref no.Extensionsizes (E)

Widthmm

Depthmm

12.512 36x36 593 61312.513 54x36 899 613Height: 165mmCarrying capacity: 350kg

Metal-slat insert panelsThe panels are inserted in the heavy-duty extensionswithout screws.Specification: sheet steel profiles, galvanized.


Widthmm Number of slats

12.518 36x36 / 54x36 148 112.519 36x36 593 4 *12.520 54x36 899 6 *Depth: 613mmHeight: 30mm* Slat set = 1 panel

Wooden insert panelsFor do-it-yourself drilling to store tools to individual re-quirements. The panels are inserted in the heavydutyextensions without screws.Specification: multiplex top with steam-treated beech

veneer, waterproof glued multi-layer (DIN 68 705) andpainted. Bevelled edges and surface planed. The paintresists water, alcohol, solvents and PVC (DIN 68861).


Widthmm

Depthmm

12.514 36x36 593 61312.515 54x36 899 613Height: 30mm

Ribbed matServes as protection and is fitted with self-adhesivetape onto wooden and metal insert panels.Specification: NBR-68 SH-A (nitrilbutadinrubber).Colour: black.


Widthmm

Depthmm

12.516 36x36 593 61312.517 54x36 899 613Thickness: 3mm


Hinged doors

Colour: according to colour chart.

For section width 36E

Ref no.

For storageheightmm

18.328 100018.329 200018.330 220018.681 2500


Ref no.

For storageheightmm

18.332 100018.333 200018.334 220018.682 2500


Ref no.

For storageheightmm

18.336 100018.337 200018.338 220018.683 2500


Ref no.

For storageheightmm

18.340 100018.341 200018.342 220018.684 2500


Ref no.

For storageheightmm

18.344 100018.345 200018.346 220018.685 2500Storage unit depth with hinged doors = vertical frame depth + 50mmAttention: Hinged doors cannot be fitted immediately adjacent to sliding doors.If door and storage wall heights are not identical, individual securing holes must be drilled (see assemblyinstructions).

Double-hinged doors with 2-position locking rod and

Specification: sheet steel.shelf storage units.recessed pull handle lock. Doors can be retrofitted to

Sliding doors

Each pair of sliding doors closes a two-shelf section.Doors run easily and quietly on rollers in tracks fittedat top and bottom on vertical storage unit supports.Equipped with rotary cylinder lock. Doors open to give

unhindered access to a full shelving unit. Sliding doorscan be retrofitted to shelf storage units.Specification: sheet steel. Colour: according to colourchart.

For section width 2 x 36E

Ref no.

For storageheightmm

18.272 200018.273 220018.274 2500



Ref no.

For storageheightmm

18.277 200018.278 220018.279 2500


Ref no.

For storageheightmm

18.282 200018.283 220018.284 2500


Ref no.

For storageheightmm

18.287 200018.288 220018.289 2500


Ref no.

For storageheightmm

18.292 200018.293 220018.294 2500

End cover plates to sliding doorsFor basic units in combination with storage wall endpanels. Can be fitted on left or right.Specification: sheet steel. Colour: according to colourchart.

Ref no.

For storageheightmm

Depthmm

18.322 2000 10518.323 2200 10518.324 2500 105Storage unit depth with sliding doors = vertical frame depth + 105mmAttention: Locking doors must always be on thr right.Hinged doors and roller-shutter fronts cannot be fitted immediately adjacent to sliding doors.


Roller-shutter fronts, incl. universal panel

Pre-assembled roller-shutter housing. Roller-shutterguides in vertical profiles, built-on to vertical sideframes. Locking device with tongue, incl. cylinderlock.For first assembly incl. universal panel, pre-drilled toaccommodate the roller-shutter housing.Specification: roller-shutter housing and guide profilesin sheet steel. Colour: according to colour chart. Roll-er-shutter of plastic profiles. Colour: light grey RAL7035.

Attention:Mounting raises the shelf by 323mm.Roller-shutter fronts cannot be fitted directly adjacentto sliding doors.

Roller-shutters must not be fitted in front of verticalstorage drawers.

For section width 36E with universal panel

Ref no.Storage heightmm

Overall heightmm

16.618 1450 + 323 = 177316.619 2000 + 323 = 232316.620 2200 + 323 = 252316.621 2500 + 323 = 2823

For section width 2 x 36E with universal panel


Overall heightmm

16.638 1450 + 323 = 177316.639 2000 + 323 = 232316.640 2200 + 323 = 252316.641 2500 + 323 = 2823



Overall heightmm

16.622 1450 + 323 = 177316.623 2000 + 323 = 232316.624 2200 + 323 = 252316.625 2500 + 323 = 2823



Overall heightmm

16.626 1450 + 323 = 177316.627 2000 + 323 = 232316.628 2200 + 323 = 252316.629 2500 + 323 = 2823



Overall heightmm

16.630 1450 + 323 = 177316.631 2000 + 323 = 232316.632 2200 + 323 = 252316.633 2500 + 323 = 2823



Overall heightmm

16.634 1450 + 323 = 177316.635 2000 + 323 = 232316.636 2200 + 323 = 252316.637 2500 + 323 = 2823

End cover plates to roller-shutterFor drawer storage walls with built-on roller-shutterhousing.Specification: sheet steel. Colour: according to colourchart.


Overall heightmm

16.590 1450 + 323 = 177316.591 2000 + 323 = 232316.592 2200 + 323 = 252316.593 2500 + 323 = 2823


Width: 43mmDepth: 753mm

Storage depth with roller-shutter = standard frame depth + 64mm

Roller-shutter fronts, without universal panel

Pre-assembled roller-shutter housing. Roller-shutterguides in vertical profiles, built-on to vertical sideframes. Locking device with tongue, incl. cylinderlock.

Specification: roller-shutter housing and guide profilesin sheet steel. Colour: according to colour chart. Roll-er-shutter of plastic profiles.Colour: light grey RAL 7035.

For section width 36E without universal panel


Overall heightmm

16.598 1450 + 323 = 177316.599 2000 + 323 = 232316.600 2200 + 323 = 252316.601 2500 + 323 = 2823

For section width 2 x 36E without universal panel


Overall heightmm

16.614 1450 + 323 = 177316.615 2000 + 323 = 232316.616 2200 + 323 = 252316.617 2500 + 323 = 2823



Overall heightmm

16.602 1450 + 323 = 177316.603 2000 + 323 = 232316.604 2200 + 323 = 252316.605 2500 + 323 = 2823



Overall heightmm

16.606 1450 + 323 = 177316.607 2000 + 323 = 232316.608 2200 + 323 = 252316.609 2500 + 323 = 2823



Overall heightmm

16.610 1450 + 323 = 177316.611 2000 + 323 = 232316.612 2200 + 323 = 252316.613 2500 + 323 = 2823




Overall heightmm

16.590 1450 + 323 = 177316.591 2000 + 323 = 232316.592 2200 + 323 = 252316.593 2500 + 323 = 2823Width: 43mmDepth: 753mm

Storage depth with roller-shutter = standard frame depth + 64mmAttention:Mounting raises the shelf by 323 mm.Roller-shutter fronts cannot be fitted directly adjacent to sliding doors.Roller-shutters must not be fitted in front of vertical storage drawers.

Safety ladders

For easy access to high drawers and shelves. The lad-der can be folded back onto the front of the shelf-caseallowing free passage. When in use the ladder is fold-ed out to the left or right, giving access to the wholefront of the shelves. The ladder is easy to operatethanks to the ball bearing rollers at the top and the

steering rollers at the bottom. The wooden steps arefitted with a non-slip surface. The handrail, plexiglasstop shelf and a handbrake guarantee the safety of theperson using the ladder.Colour: yellow RAL 1004.


Min. roomhightmm

65.002 2000 270065.003 2200 270065.004 2500 270065.005 3000 3200Min. width of aisle: 900mmRequired space when folded away: 320mm

Pair of rails

Ref no.65.001 Pair of rails top and bottom, per Im.Attention:When ordering exact requirements must be started or illustrated (top rail manufacture). Please specify if usewith sliding doors or roller-shutter is intended.

Single locking, part height

With cylinder lock. Locks all drawers located beneathit. Bottom panels and locking shelves.

For B251

Ref no.Clear heightmm

Nominal heightmm

13.457 300 40013.458 450 55013.459 600 70014.377 700 80013.460 750 85013.461 900 100013.462 1050 115013.463 1225 132513.604 1250 135013.464 1350 145013.465 1525 162513.605 1550 1650


Single locking, full height

Lever handle with cylinder lock. Locks all drawerswithin the entire section. Bottom panels and lockingshelves.

For B251


Clear heightmm

Door heightmm

13.502 2000 900 95013.503 2200 900 115013.504 2500 900 145013.505 3000 900 1950


Drawer storage walls with vertical drawers

for keeping preset tools or components of

these within easy reach.

They are the best guarantee of value pre-

servation and efficient use of high-grade

materials. Individual assembly meets all

requirements. The optimum drawer storage

wall can be assembled for every purpose.


DRAWER STORAGE WALLS B251WITH VERTICAL PULL-OUT STORAGE UNITS

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



Dimensions vertical storage drawers B251

DRAWER STORAGE WALLS B251WITH VERTICAL PULL-OUT STORAGE UNITS

A Section widths Dimensions 714mm = 36 units Build-in width = 650mm867mm = 45 units 800mm

1020mm = 54 units 950mmB Storage depth Actual dimension 706mm = for drawers 36E units depthC Storage heights Actual dimension 2000mm 2200mm 2500mmD Front height Actual dimension 750mm

vertical storage drawers, part heightE Useful height Storage height 2000mm 2200mm 2500mm

For fitting drawers 1050mm 1250mm 1550mmF Useful height Storage height 2000mm 2200mm 2500mm

vertical storage drawers, full height 1900mm 2100mm 2400mmG Storage lengths Without closing end panels = Number of section widths + 53 mm

With closing end panels = Number of section widths + 100mmSlots Pillar frame slotted every 25mm for the fitting of drawers.

Shelves slotted every 15mm for partitioning.1 unit (E) =17mm

Carrying capacities

Storage Carrying capacityunit height Vertical storage Number of per sectionmm drawers shelves kg2000 Part height 4 5500

Full height 2 45002200 Part height 4 5500

Full height 2 45002500 Part height 4 5250

Full height 2 4250

* Floor shelf for verticalpull-out = 60 mm

Examples for fitting vertical storage drawers

For Build-in No.of drawers x front panel in mmsection width width Examples:mm/Einheiten mm 1 2 3 4 5 6 7714/36 661 2x125 2x100 3x150 2x150 2x200 3x220 2x330

4x100 3x150 1x200 2x175 1x250 NC NC867/45 814 8x100 2x100 4x150 1x100 4x200 1x100 1x200

4x150 1x200 4x175 2x150 2x3002x200

1020/54 967 7x100 1x100 5x150 1x200 3x150 1x150 4x1752x125 3x150 1x200 3x250 1x200 1x200 1x250

2x200 1x300 2x300


componenT parTs

Upright side frame

The side frame columns are slotted every 25mm to ac-commodate the slide rails and the shelf holders. Thefront and rear columns and the horizontal supports arewelded together providing a stable frame. When plan-ning the storage sections the required locking systems

with the appropriate frame column should be consid-ered.Specification: sheet steel pressed profiles. Colour: ac-cording to colour chart. Locking systems see accesso-ries.

Standard

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

13.247 2000 1900 706 5313.248 2200 2050 706 5313.249 2500 2350 706 53

«Full height» with lock

Ref no.

For storageheightmm

Clear heightmm

42.575 2000 190042.576 2200 210042.577 2500 2400Width: 53mmDepth: 706mm

«Partial height» with lock

Ref no.

For storageheightmm

Clear heightmm

42.578 2000 75042.579 2200 75042.580 2500 750Width: 53mmDepth: 706mm

Rear panels






13.260 714 / 36 2000 2 x 100013.261 714 / 36 2200 1 x 1000, 1 x 120013.262 714 / 36 2500 2 x 1000, 1 x 50012.330 867 / 45 2000 2 x 100012.379 867 / 45 2200 1 x 1000, 1 x 120012.570 867 / 45 2500 2 x 1000, 1 x 50013.374 1020 / 54 2000 2 x 100013.375 1020 / 54 2200 1 x 1000, 1 x 120013.376 1020 / 54 2500 2 x 1000, 1 x 500






13.686 714 / 36 2000 2 x 100013.687 714 / 36 2200 1 x 1000, 1 x 120013.688 714 / 36 2500 2 x 1000, 1 x 50012.378 867 / 45 2000 2 x 100012.380 867 / 45 2200 1 x 1000, 1 x 120012.571 867 / 45 2500 2 x 1000, 1 x 50013.704 1020 / 54 2000 2 x 100013.705 1020 / 54 2200 1 x 1000, 1 x 120013.706 1020 / 54 2500 2 x 1000, 1 x 500

Side panels

Side covering of storage system. The welded end pan-el provides stability and is fitted over the vertical sideframe with shelf support clips. Support clips included.Specification: sheet steel. Colour: according to colourchart.

Ref no.

For storageheightmm

Depthmm


13.254 2000 706 23 113.255 2200 706 23 113.256 2500 706 23 2

Diagonals




13.285 714 / 36 1000 - 300012.222 867 / 45 1450 - 300013.589 1020 / 54 1450 - 3000


Levelling plates


Ref no.Widthmm

Depthmm

Thicknessmm

17.140 134 60 117.141 134 60 217.142 134 60 4



Ref no.

For storageheightmm

Depthmm

Widthmm

13.281 2000 18 3613.282 2200 18 3613.283 2500 18 36

Adjustable shelves




Useful widthmm

Carryingcapacitykg

13.291 714 / 36 661 20012.231 867 / 45 814 20012.129 1020 / 54 967 200



Useful widthmm

Carryingcapacitykg

13.294 714 / 36 661 20012.240 867 / 45 814 20012.130 1020 / 54 967 200Useful depth of drawer: 701mmThickness 25mmCarrying capacity with evenly distributed load

Top shelves for vertical storage

For the fitting of vertical storage drawers, part and fullheight. With slotted rails welded in front and rear,slots every 25mm. The top shelves are screwed to theupright side frames. Incl. fixing material.Specification: sheet steel. Colour: according to colourchart.


Useful widthmm

Carryingcapacitykg

13.422 714 / 36 661 30042.747 867 / 45 814 30042.748 1020 / 54 967 300


Depth: 705mmShelf thickness: 40mm

Floor shelves for vertical storage

For the fitting of vertical storage drawers, full height.With slotted rails welded in front and rear, slots every25mm. The floor shelves are screwed to the uprightside frames. Incl. fixing material.Specification: sheet steel. Colour: according to colourchart.


Useful widthmm

Carryingcapacitykg

13.423 714 / 36 661 *42.745 867 / 45 814 *42.746 1020 / 54 967 *Depth: 705mmShelf thickness: 60mm* The load weight of the vertical storage drawers is transferred to the floor.



For B251


Nominal heightmm

13.462 1050 115013.604 1250 135013.605 1550 1650

Intermediate shelves

For the fitting of vertical storage drawers, part height.With slotted rails welded in front and rear, slots every25mm. The intermediate shelves are screwed to theupright side frames. Incl. fixing material. The load

weight of the vertical storage drawers is transferred tothe floor.Specifications: sheet steel. Colour: according to colourchart.


Useful widthmm

Carryingcapacitykg

42.584 714 / 36 661 450*42.585 867 / 45 814 600*42.586 1020 / 54 967 600*Depth: 705mmShelf thickness: 60mm* The load weight of the vertical storage drawers is transferred to the floor.


Universal panels




Useful widthmm

Carryingcapacitykg

13.288 714 / 36 661 25012.033 867 / 45 814 25012.127 1020 / 54 967 250Useful depth:705mmShelf depth: 50mm

Dividers



Heightmm

Depthmm

100.434 701 95 678100.435 701 145 678100.436 701 195 678



S3 S2 F1 Ref no.For section widthmm / E Specification

Useful widthmm

Carryingcapacitykg

13.297 714 / 36 F1 66113.300 714 / 36 S2 661 20013.303 714 / 36 S3 66112.831 867 / 45 F1 81412.839 867 / 45 S2 814 20012.870 867 / 45 S3 81412.131 1020 / 54 F1 96712.132 1020 / 54 S2 967 20012.133 1020 / 54 S3 967F1= Bottom panelS2 = Locking shelfS3 = Locking shelfShelf thickness: 50mmUseful depth: 705mmCarrying capacity with evenly distributed load



Ref no.Widthmm

Depthmm

13.354 52 597

Shelf fronts



Heightmm

16.667 714 / 36 10016.668 867 / 45 10016.669 1020 / 54 10016.670 1190 / 64 10016.671 1428 / 78 100


order side and rear panel separately

Vertical storage drawers, part height

Full extension frame construction of angled profileswith vertical slotting every 50mm. There is a welded-on slotted rail on the inside surface of the front panelto enable single- or double-sided storage. 25mm grid

system.Specification: sheet steel. Colour: vertical frame greyNCS S 4502-B. Front panel according to colour chart.


Front widthmm

Useful widthsingle sid-ed Amm

Useful width double sided B/Bmm

Carryingcapacitykg

42.616 750 100 68 10042.736 750 125 93 10042.617 750 150 118 68 / 68 10042.737 750 175 143 68 / 93 10042.618 750 200 168 93 / 93 10042.619 750 220 NC * 105 / 105 10042.620 250 750 218 118 / 118, 93 / 143, 68 / 168 10042.621 750 300 268 143 / 143, 118 / 168 10042.622 750 330 NC * 143 / 168 100Useful height: 576mmUseful depth: 625mm* NC: Only for fitting in sections with 714 / 36 units.

Vertical storage drawers, full height

Full extension frame construction of angled profileswith vertical slotting every 50mm. There is a welded-on slotted rail on the inside surface of the front panelto enable single- or double-sided storage. 25mm grid

system.Specification: sheet steel. Colour: vertical frame greyNCS S 4502-B. Front panel according to colour chart.

For storage height 2000mm, 100kg

Ref no.

Storageheightmm

Front widthmm



42.644 2000 100 6842.730 2000 125 9342.645 2000 150 118 68 / 6842.731 2000 175 143 68 / 9342.646 2000 200 168 93 / 9342.647 2000 220 NC * 105 / 10542.648 2000 250 218 118 / 118, 93 / 143, 68 / 16842.649 2000 300 268 143 / 143, 118 / 16842.650 2000 330 NC * 143 / 168Useful height: 1726mmUseful depth: 625mm



Ref no.

Storageheightmm

Front widthmm





Ref no.

Storageheightmm

Front widthmm





Ref no.

Storageheightmm

Front widthmm





Ref no.

Storageheightmm

Front widthmm





Ref no.

Storageheightmm

Front widthmm



42.704 2500 100 6842.742 2500 125 9342.705 2500 150 118 68 / 6842.743 2500 175 143 68 / 9342.706 2500 200 168 93 / 9342.707 2500 220 NC * 105 / 10542.708 2500 250 218 118 / 118, 93 / 143, 68 / 16842.709 2500 300 268 143 / 143, 118 / 16842.710 2500 330 NC * 143 / 168


Useful height: 2226mmUseful depth: 625mm

* NC: Only for fitting in sections with 714 / 36 units.

Holders for suspension tool storage

The holders can be fitted in the transport units B240and in the vertical drawers, part height and fullheight.Specification: sheet steel. Colour: grey NCS S 4502-B.

Ref no.For toolsISO-SK

For toolsHSK

Max. retain-er / shaftØmm

Widthmm

Depthmm

Number oftools

Frontwidthmm

12.701 30 50-A+C/63-B+D 51 / 36 600 56 1112.773 40 63-A+C/80-B+D 63 / 50 600 56 9 220 NC12.775 45 80-A+C/100-B+D 82 / 63 600 72 7 220 NC12.432 50 100-A+C/125-B+D 98 / 80 622 84 6 220 NC12.861 50 112 / 85 600 100 5 330 NC

Support channels for vertical pull-out storage units

Pressed steel profiles slotted every 12.5mm (50 holes= 49 slots) to accommodate the broach clamps andhalf depth shelves. The support channels can be ad-justed in height every 50mm.

Specification: sheet steel. Colour: grey NCS S 4502-1.Neoprene profiles can be slotted in the channels toprotect the tools.

Support channels

Ref no.Widthmm

Depthmm

Heightmm

12.801 18 620 50

Neoprene profile

Ref no.Widthmm

Depthmm

Heightmm

13.189 16 620 46

Broach clamps

To hold tools and half depth shelves. The clamps areinserted into a pair of holes in the support channels.Specification: galvanized round steel with neoprenecoating.

Ref no.Number ofunits

For max. Ømm

12.962 2 1512.963 3 2712.853 4 3512.854 5 4812.855 6 6012.856 7 73

Ref no.Number ofunits

For max. Ømm

12.857 8 8512.858 9 9812.859 10 11012.190 11 12312.191 12 135


Perforated plates with square slots

The perforated plates are each suspended from theframe of the vertical drawers with 4 perforated platesupports (includes perforated plate supports). With Ø3.6mm round perforations (for Taptite M4 x 10 self-

tapping screws), spacing 19mm, and 10 x 10mmsquare perforation, spacing 38mm.Specification: Sheet steel. Colour: grey NCS S 4502-B.

For complete utilisation of vertical drawers


Storage heightmm

Heightmm Required number of panels

12.161 750 550 112.162 1900 2000 1650 312.163 2100 2200 1900 412.164 2400 2500 2200 4

For partial utilisation of vertical drawers


Heightmm Required number of panels

12.160 250 112.161 750 550 1Width: 605mmThickness: 9.5mm

Half depth shelves

Stable top surface with wooden inserts to protecttools. Slotted every 12.5mm. The shelves are half thelength of the depth of the drawers making the storageof long and short tools in one and the same drawer

possible.Specification: sheet steel. Wooden insert. Colour: greyNCS S 4502-B.

Ref no.Lengthmm

Depthmm

12.964 310 5012.965 310 7512.966 310 10012.967 310 12513.192 310 150Carrying capacity: 125kgAttention:At least two broach clamps are required to secure a half depth shelf.

Adjustable shelves

Shelves can be fitted with rear panels and ribbed matsif required. Incl. fixing material.Specification: sheet steel.

Colour: grey NCS S 4502-B.

For vertical drawer fronts single-sided 125mm or doube-sided 200mm

Ref no.Widthmm

Depthmm

Heightmm

12.799 Shelf 620 90 10013.196 Rear panel 620 10013.197 Ribbed mat 619 88

For vertical drawer fronts single-sided 200mm

Ref no.Widthmm

Depthmm

Heightmm

12.800 Shelf 620 165 10013.200 Ribbed mat 619 163

Frame top covering


Ref no.Widthmm

Depthmm

13.355 53 706


Shelf end panels


Ref no.Heightmm

Depthmm


13.356 150 659 20013.357 200 659 25013.358 250 659 300

Drawers

EA; VA



Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg





Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg


Useful depth of drawers 612mm = 36 units of 17mmEA = Normal extension: 85 - 90% extension possible, max. Carrying capacity with evenly distributed loadVA = Total extension: 100% extension possible, the load-bearing capacity per drawer is max. 200kg. The op-erating manual must be observed for the loading and burden on drawers and drawer cabinetsThe front heights of all the drawers together should not exceed usable cabinet height.





Ref no.Label sizemm



Pull out shelves


full width protruding continuous handle with transpar-ent shield, labels and handle covers.Specification: sheet steel. Colour: according to colourchart. Slats made of sheet steel profile, sendzimir gal-vanized.

EA; VA



Useful widthmm

Carryingcapacitykg

13.330 714 / 36 75 EA 612 8013.331 714 / 36 75 VA 612 20012.227 867 / 45 75 EA 765 8012.228 867 / 45 75 VA 765 20012.229 1020 / 54 75 EA 918 8012.128 1020 / 54 75 VA 918 20013.342 1190 / 64 75 VA 1088 20013.352 1428 / 78 75 VA 1326 200Useful depth: 612mmCarrying capacity with evenly distributed loadEA = Normal extension: 80 - 90% extension possibleVA = Full extension: 100% extension possible


Ref no.Label sizemm



Locking systems

Standard equipment: with separate lock, Lista cylinderlocks, incl. two keys each. For part height and fullheight.

Separate lockEach lock has a separate key, i.e. with one key one lockor cabinet can be opened.


42.587 714 / 3642.588 867 / 4542.589 1020 / 54Common lockAll locks have the same locking system. The same key opens all common locks or cabinets. No extra charge.


PP master key system

Each cabinet lock is separate. The master key (mainkey) opens all locks or cabinets in the master key sys-tem.

Ref no.20.040 Master key, make: DOMOn demand: PP-master key system, incl. two keys, extra charge per lock

Single drawer safety devices

The single drawer safety device ensures that only onevertical storage drawer can be opened at a time. This,together with the compulsory floor anchoring, avoidsan overbalancing of the storage section or unit.

Full height:Compulsary for full height verticaldrawers.Part height: If required, but not compulsory for partheight vertical drawers.


42.590 714 / 3642.591 867 / 4542.592 1020 / 54

Anchors


Label holders

Self-adhesive, transparent, synthetic label holder incl.paper.

Ref no.Widthmm

Heightmm

Top thicknessmm

42.769 90 50 5


A shelf system combining all the advantages

of the drawer cabinets and full wall shelvings.

Drawers, pull-out and adjustable shelves can

be combined in drawer storage walls, enab-

ling them to be equipped to accommodate

parts of any size in any quantity and variety.

Any alterations needed are effected simply by

changing the individual parts. The versatility

of the system means it can be equipped to

suit the particular logistics system. Numerical

storing or space allocation by EDP – drawer sto-

rage walls always enable perfect organization.


DRAWER STORAGE WALLS B255

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



STORAGE DIMENSIONS

Dimensions B255

A Section widths Dimensions 714mm = 36 units1020mm = 54 units

B Storage depths Actual dimensions 553mm = for drawers 27 units deepWith hinged doors 603mmWith sliding doors 658mmWith roller-shutter 617mm

C Storage heights Actual dimensions 1000mm 1450mm 2000mm 2200mm 2500mm 3000mmWith hinged doors 1000mm – 2000mm 2200mm 2500mm –With sliding doors – – 2000mm 2200mm 2500mm –With roller-shutter – 1773mm 2323mm 2523mm 2823mm –

D Useful heights Number of slots x 25mmE Storage lengths Without end panels = Number of section widths + 53mm

With end panels = Number of section widths + 100mmExample without end panels5 x 1020mm + 53mm = 5153mm5 x 54 E + 53mm = 5153mm

Slots Pillar frame slotted every 25mm for the fitting of drawers.Shelves slotted every 15mm for partitioning.1 unit ( E ) = 17mm


• With double height shelving, diagonal braces or rear panels must be fitted in everythird shelving section e on the lower level.


Carrying capacities

Min.- max. CarryingNumber of Useful height of middle capacity

Storage height universal heights universal shelves from base per storage sectionmm shelves mm mm kg1000 2 900 – 55001450 2 1350 – 50002000 2 1900 – 45002000 3 1850 800 – 1200 55002200 3 2050 900 – 1300 55002500 3 2350 1050 – 1450 52503000 3 2850 1300 – 1700 5000

• The shown load capacities are only valid if always the first and evey followingthird section is equipped with rear panels or diagonal braces.

Securing requirementsAll drawer storage walls must be anchored. Ships with 1 anchoring per vertical sideframe. Exception: double-sided drawer storage walls that are screwed togetherback-to-back, no anchoring required.


Add-on side rightAdd-on side left Sliding door Hinged door Roller-shutter Locking profile1

Sliding door • – • –Hinged door – • • –Roller-shutter • • • –Locking profile 1 – – – •Drawers 2 • • • •

Explanations : • possible – not possible1 Locking profile is double sided2 For fitting behind front assembly

Front-mounting variants

DRAWER STORAGE WALLS B255PLANNING INFORMATION / CARRYING CAPACITIES


drawer sTorage walls b255componenT parTs


Frames with holes on both sides at 25mm incrementsfor fitting runner rails and shelf supports. Vertical frontand rear channels are welded to horizontal brace toform rigid and stable side frame. If drawer safety lock-

ing devices are required, lock profiles must be boltedto the vertical side frame.Specification: pressed steel profiles. Colour: accordingto colour chart.

Standard

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

13.361 1000 900 553 5313.362 1450 1350 553 5313.363 2000 1900 553 5313.364 2200 2050 553 5313.365 2500 2350 553 5313.366 3000 2850 553 53

With locking profile*

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

14.361 1000 900 570 5314.362 1450 1350 570 5314.363 2000 1900 570 5314.364 2200 2050 570 5314.365 2500 2350 570 5314.366 3000 2850 570 53

With self-supporting**

Ref no.

For storageheightmm

Clear heightmm

Depthmm

Widthmm

13.700 1000 900 553 5313.672 1450 1350 553 5313.673 2000 1900 553 5313.674 2200 2050 553 5313.675 2500 2350 553 5313.676 3000 2850 553 53Depth of side frame with lock profile 570mm.* Used in conjunction with drawer fitting.** For later additions or heights of over 3000mm.


Rear panels






13.258 714 / 36 1000 1 x 100013.259 714 / 36 1450 1 x 1000, 1 x 45013.260 714 / 36 2000 2 x 100013.261 714 / 36 2200 1 x 1000, 1 x 120013.262 714 / 36 2500 2 x 1000, 1 x 50013.263 714 / 36 3000 3 x 100013.372 1020 / 54 1000 1 x 100013.373 1020 / 54 1450 1 x 1000, 1 x 45013.374 1020 / 54 2000 2 x 100013.375 1020 / 54 2200 1 x 1000, 1 x 120013.376 1020 / 54 2500 2 x 1000, 1 x 50013.377 1020 / 54 3000 3 x 1000





13.684 714 / 36 1000 1 x 100013.685 714 / 36 1450 1 x 1000, 1 x 45013.686 714 / 36 2000 2 x 100013.687 714 / 36 2200 1 x 1000, 1 x 120013.688 714 / 36 2500 2 x 1000, 1 x 50013.689 714 / 36 3000 3 x 100013.702 1020 / 54 1000 1 x 100013.703 1020 / 54 1450 1 x 1000, 1 x 45013.704 1020 / 54 2000 2 x 100013.705 1020 / 54 2200 1 x 1000, 1 x 120013.706 1020 / 54 2500 2 x 1000, 1 x 50013.707 1020 / 54 3000 3 x 1000

Rear panel holder

Ref no.13.264 714mm / 36E13.378 1020mm / 54EFor later additional height or height over 3000mm.

Diagonals




13.285 714 / 36 1000 - 300013.394 1020 / 54 100013.589 1020 / 54 1450 - 3000

Intermediate partitions

For later suspension in side frames. Used especially be-hind sliding doors, hinged doors and roller-shutters asanti-theft protection. Can be employed on both theright and left side.Specification: sheet steel. Colour: according to colourchart.

Ref no.For storage heightmm

Frame depthmm Number of panels Number cross beams

18.706 1000 553 1 118.707 1450 553 1 118.698 2000 553 1 118.699 2200 553 2 218.700 2500 553 2 218.701 3000 553 3 3


Side panels

Side covering of storage system. The welded end pan-el provides stability and is fitted over the vertical sideframe with shelf support clips. Support clips included.Specification: sheet steel.Colour: according to colour chart.

Ref no.

For storageheightmm

Depthmm


13.388 1000 553 23 113.389 1450 553 23 113.390 2000 553 23 113.391 2200 553 23 113.392 2500 553 23 213.393 3000 553 23 2

Levelling plates


Ref no.Widthmm

Depthmm

Thicknessmm

17.140 134 60 117.141 134 60 217.142 134 60 4

Anchors





Ref no.

For storageheightmm

Depthmm

Widthmm

13.279 1000 18 3613.280 1450 18 3613.281 2000 18 3613.282 2200 18 3613.283 2500 18 3613.284 3000 18 36

Universal panels




Useful widthmm

Carryingcapacitykg

13.385 1020 / 54 967 25015.253 714 / 36 661 250

Universal panels slotted


Useful widthmm

Carryingcapacitykg

13.740 1020 / 54 967 25015.254 714 / 36 661 250Useful depth: 552mmShelf thickness: 50mm

Nut retainer

For fitting bolt-in shelves into sections where the sideframes are inaccessible. This is the case when the sideframe has a partition fitted and there is a counter im-mediately adjacent.Specification: sheet steel. Colour: bright galvanized. 2pcs per shelf next to partition.

Ref no.Lengthmm

16.997 55

Drawers

EA; VA



Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg





Useful heightmm


Carryingcapacitykg




Useful heightmm


Carryingcapacitykg


EA = Normal extension: 85 - 90% extension possible, max. Carrying capacity with evenly distributed loadVA = Total extension: 100% extension possible, the load-bearing capacity per drawer is max. 200kg. The op-erating manual must be observed for the loading and burden on drawers and drawer cabinetsThe front heights of all the drawers together should not exceed usable cabinet height.




Ref no.Label sizemm



Useful depth of drawers 572mm = 27 units of 17mm


Pull-out shelf


full width protruding continuous handle with transpar-ent shield, labels and handle covers.Specification: sheet steel. Colour: according to colourchart, slats made of sheet steel profile, sendzimir gal-vanized.

EA; VA



Useful widthmm

Carryingcapacitykg

15.448 714 / 36 75 EA 612 8015.449 714 / 36 75 VA 612 20013.415 1020 / 54 75 EA 918 8013.416 1020 / 54 75 VA 918 200Useful depth: 459mmCarrying capacity with evenly distributed loadEA = normal extension 80 - 90% extension possibleVA = full extension 100% extension possible

Adjustable shelves




Useful widthmm

Carryingcapacitykg

13.386 1020 / 54 967 20015.255 714 / 36 661 200



Useful widthmm

Carryingcapacitykg

13.387 1020 / 54 967 20015.256 714 / 36 661 200Useful depth: 548mmShelf thickness: 25mmCarrying capacity with evenly distributed load

Dividers



Heightmm

Depthmm

123.716 548 95 525123.717 548 145 525123.718 548 195 525



S3 S2 F1Ref no.For section widthmm / E Specification

Useful widthmm

Carryingcapacitykg

13.395 1020 / 54 F1 96713.396 1020 / 54 S2 967 20013.397 1020 / 54 S3 96715.445 714 / 36 F1 66115.446 714 / 36 S2 661 20015.447 714 / 36 S3 661


F1= Bottom panelS2 = Locking shelfS3 = Locking shelfShelf thickness: 50mmUseful depth: 705mmCarrying capacity with evenly distributed load



Ref no.Widthmm

Depthmm

13.417 52 444

Shelf fronts



Heightmm

16.667 714 / 36 10016.669 1020 / 54 100order side and rear panel separately

Frame top covering


Ref no.Widthmm

Depthmm

13.418 53 553

Shelf end panels


Ref no.Heightmm

Depthmm


13.419 150 506 20013.420 200 506 25013.421 250 506 300


Hinged doors


Colour: according to colour chart.


Ref no.

For storageheightmm

18.328 100018.329 200018.330 220018.681 2500


Ref no.

For storageheightmm

18.336 100018.337 200018.338 220018.683 2500Storage unit depth with hinged doors = vertical frame depth + 50mmAttention: Hinged doors cannot be fitted immediately adjacent to sliding doors.If door and storage wall heights are not identical, individual securing holes must be drilled (see assemblyinstructions).

Sliding doors




Ref no.

For storageheightmm

18.272 200018.273 220018.274 2500


Ref no.

For storageheightmm

18.282 200018.283 220018.284 2500


Ref no.

For storageheightmm

Depthmm

18.322 2000 10518.323 2200 10518.324 2500 105Storage unit depth with sliding doors = vertical frame depth + 105mmAttention: Locking doors must always be on thr right.Hinged doors and roller-shutter fronts cannot be fitted immediately adjacent to sliding doors.

Specification: sheet steel.shelf storage units.recessed pull handle lock. Doors can be retrofitted to


Roller-shutter fronts incl. universal panel





Overall heightmm

16.642 1450 + 323 = 177316.643 2000 + 323 = 232316.644 2200 + 323 = 252316.645 2500 + 323 = 2823



Overall heightmm

16.650 1450 + 323 = 177316.651 2000 + 323 = 232316.652 2200 + 323 = 252316.653 2500 + 323 = 2823



Overall heightmm

16.594 1450 + 323 = 177316.595 2000 + 323 = 232316.596 2200 + 323 = 252316.597 2500 + 323 = 2823Width: 43mmDepth: 600mm

Storage depth with hinged doors = Vertical frame depth + 64mmAttention:Mounting raises the shelf by 323mm.Roller-shutters cannot be fitted directly adjacent to sliding doors.Roller-shutter fronts cannot be fitted in front of vertical extensions.

Roller-shutter fronts, without universal panel





Overall heightmm

16.598 1450 + 323 = 177316.599 2000 + 323 = 232316.600 2200 + 323 = 252316.601 2500 + 323 = 2823



Overall heightmm

16.606 1450 + 323 = 177316.607 2000 + 323 = 232316.608 2200 + 323 = 252316.609 2500 + 323 = 2823




Overall heightmm

16.594 1450 + 323 = 177316.595 2000 + 323 = 232316.596 2200 + 323 = 252316.597 2500 + 323 = 2823Width: 43mmDepth: 753mm

Storage depth with roller-shutter = standard frame depth + 64mmAttention:Mounting raises the shelf by 323 mm.Roller-shutter fronts cannot be fitted directly adjacent to sliding doors.Roller-shutters must not be fitted in front of vertical storage drawers.

Safety ladders




Min. roomhightmm


Pair of rails




For B255


Nominal heightmm

13.613 300 40013.614 450 55013.615 600 70014.378 700 80013.616 750 850


Nominal heightmm

13.617 900 100013.618 1050 115013.619 1225 132513.620 1350 145013.621 1525 1625

Single locking, full height

Lever handle with cylinder lock. Locks all drawerswithin the entire section. Bottom panels and lockingshelves.

For B255


Clear heightmm

Door heightmm

13.662 2000 900 95013.663 2200 900 115013.664 2500 900 145013.665 3000 900 1950



acc. drawer sTorage walls b251/b255lisTa scripT labelling sysTem

By using Lista Script, labels for drawer cabinets, draw-er partition material and labelling strip can be printedeasily, neatly and systematically. Lista Script permits toinclude text, bar codes, pictograms, images and col-ours. Link to database possible.

Labelling software free of charge fromthe Internetwww.lista.com/script

Blank labels for drawer partition material

Blank labels, specially designed for use with the ListaScript labelling software, are available as A4 papersheets, for use with all popular PC printers.

*

*

27 x 12 47 x 1847 x 12

* Labelling with corresponding clip-on label holder

Ref no.Label sizemm


18.787 27 x 12 2 sheets = 266 labels18.786 47 x 12 2 sheets = 152 labels18.785 47 x 18 2 sheets = 104 labels

Blank labels for drawer cabinet handle

Blank labels, specially designed for use with the ListaScript labelling software, are available as A4 papersheets, for use with all popular PC printers.

Ref no.Label sizemm



Retrofit drawer handles

Drawer cabinets made from 1985 onwards are easy toretrofit with the new-style handles, available in a fullrange of widths.

Ref no.Handle lengthmm

Cabinet widthunits (E)

18.777 344 1818.778 497 2718.779 650 3618.780 803 4518.781 956 5418.782 1126 6418.783 1364 78


Disassembly tool

Ref no.18.789 Disassembly tool

Self-adhesive labels

For the labelling of shelves, clothes lockers, etc.Specification: plastic with hinged transparent protec-tor.


Ref no.Lengthmm

Heightmm

Max. heightof letteringmm

Packing unitspieces

18.926 105 22 14 118.927 210 22 14 118.929 1000 22 14 1

Self-adhesive labels incl. paper label strips

Ref no.Lengthmm

Heightmm


Packing unitspieces

18.930 105 22 14 1018.931 210 22 14 10


Ref no.Label sizemm


18.932 52.5 x 18 2 sheets = 104 labelsSoftware on the internet: www.lista.com/script


ACCESSORIESLOCKING SYSTEMS

Separate lock (standard model)

Each lock comes with a key. An individual key will on-ly open a specified lock or cabinet. There is no extracharge for this.

Common lock

Each lock comes with a key. One key will be able toopen all the specified locks or cabinets. There is on ex-tra charge for this.

Flexible modular-V locking system

Modular construction makes it quick and easy for cus-tomers to modify the combination or retrofit a masterkey system, simply by exchanging the cylinder using arelease tool. The modular-V locking system is a systemsolution which is applicable across various productranges.

Release tool

For extracting interchangeable cylinders. Works onlyin conjunction with the original Lista key supplied withthe cylinder. Available on request.

1

2

1 Lock shell clips into the cabinet housing2 High quality tumbler lock cylinder

Smart Lock

See chapter «Electronic locking systems and access control systems».

e-Lock


PP-master key system

Each cabinet lock is separate. The master key (mainkey) opens all locks or cabinets in the master key sy-stem. An individual key will only open a specified lockor cabinet.


OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Shelving system 06Introduction 62

Double-Stack 66

Component parts 67


Series 06 shelvings with the classic 1000mm

or 1300mm unit lengths: for every purpose,

any material, any storage organization. The

1000mm and 1300mm unit lengths provides

a system for all requirements: from a simple

unit with shelves to completely equipped

storage facilities with extras to meet every

demand, exemplary in every detail, and

of impressive quality. With the Series 06

shelvings with push-in system, we have

devised a still better answer to your space

problems, no matter how difficult.


SHELVING SYSTEM 06

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



DrawersFor storing small parts. For use with shelf size 1000 x500mm. Drawers with full extension.

Painted shelvesWith rows of slots at the front and rear to acceptpartitions and shelf dividers. All-round edge turnsensure protection from injury.

Shelf holdersThe shelves are clipped into the shelf supports usingno-screw shelf holders, guaranteeing absolute stabilityof the shelf units.

Galvanized shelvesWith rows of slots at the front and rear to acceptpartitions and shelf dividers. All-round edge turnsensure protection from injury.

Pair of shelf supportsTwo shelf supports 06 with a maximum carrying capa-city of 2800kg form the basis of the shelving system. Thesix edge turns ensure extremely high stability.

Horizontal bracesIn conjunction with the shelf supports, these form thevertical side frames. The carrying capacity of each shelfunit can be increased by adding extra horizontal braces.

PartitionsServe to sub-divide the shelves and can be used irres-pective of the shelf spacing. Partition height: 150mm.

Shelf frontsFor storing loose material. The shelf fronts slot in andare fixed to the shelf supports.

Shelf dividersServe to sub-divide the shelves. The height of the shelfdividers, which slot in at the top and bottom, is depen-dent on the shelf spacing.

REFINEMENT IN DETAIL


Dimensions 06.0 / 06.1


SHELVING SYSTEM 06DIMENSIONS / PLANNING INFORMATION

A Section widths Actual dimensions 1040 1340mmFor shelf widths 1000 1300mm

B Shelving depth Actual dimensions 301mm 401mm 507mm 607mm 807mmFor shelf depths 300mm 400mm 500mm 600mm 800mmWith hinged doors 331mm 431mm 537mm 637mm 837mmWith sliding doors 406mm 506mm 612mm 712mm 912mm

C Shelving height Actual dimensions 2000mm 2200mm 2500mm 3000mmWith hinged doors 2000mm 2200mm 2500mmWith sliding doors 2000mm 2200mm 2500mmMax. shelving height 8000mm abutting, with spacer

D Shelf spacing Top to top shelf (number of visible divider slots + 2) x 25mmE Shelving lengths Without side panels number of section widths + 50mm

With side panels number of section widths + 85mmExample without side panels:5 x 1040mm + 1 x 1340mm + 50mm = 6590mm

Slots Vertical side frame: every 25mm for fitting shelf supports.Shelves: every 25mm for fitting dividers.

• The shown carrying capacities are only valid if always the first and every followingthird section is equipped with rear panels or diagonal braces.


Securing requirementstShelving sections with a depth to height ratio greater than 1:5 – and 1:4 – for shelfsections with hinged doors, and single sections – must be anchored.


Add-on side rightAdd-on side left Sliding door Hinged doorSliding door • –Hinged door – •Drawers1 • •

Explanations: • possible – not possible1 For fitting behind front assembly

Immediately adjacent front-mounting variants.Immediately adjacent front-mounting variants.

A(25+20)

F

G

E45

F =Rear panel / diagonal braceG =Side panel


Carrying capacities shelving system 06

ASSEMBLY OF SHELVING SECTION 06

Important: The permitted section load of shelving systems with height 2000, 2200 and 2500 mm is of 2800kg, regardless of the shelf spacing.With a shelf height of 3000mm and shelf spacing less than 500mm, the section load is reduced, if the shelves are carrying the full loadweight and are filled top down.If the shelves are filled bottom-up or loaded evenly, the permitted section load is also limited to 2800kg.

Each add-on unit consists of:a) 1 pair of shelf supportsb) 2 horizontal braces

Each basic unit consists of:a) 2 pairs of shelf supportsb) 4 horizontal bracesc) 1 diagonal brace

Important: • For shelves, see section Component parts• Both the max. carrying capacity and the max. section load have to be respected.• For each pair of shelf supports, a minimum of 2 horizontal braces has to be provided. However, these do

not influence the permitted section load, but only serve to stabilise the shelving section.

Basic unit / Add-on unit

b

a

Basic unit Add-on unit

850825800775750725700675650625600575550525500475450425400375350325300275250

Perm

itted

shel

fsec

tion

load

2800

kg

Perm

itted

shel

fsec

tion

load

2800

kg

Perm

itted

shel

fsec

tion

load

2800

kg

2600kg

2450kg

2300kg

2200kg

2100kg

Permitted shelf section load in kg

1900kg

1950kg

2000kg

2200kg

2370kg

2740kg

2670kg

2450kg

2520kg

2600kg

Shelf 110kg Shelf 400kgShelf 300kgShelf spacing

Carrying capacities shelf height 3000mm

a

b

c


Using series 06.1 shelving system, you can

fully utilize the height of the room – with

double-stack shelving sections in 1000 mm

and 1300 mm unit widths. This gives you

double the space utilization of a comparable

single-stack shelf layout. The non-screwed,

plug-together assembly of all the basic com-

ponents allows simple fast installation, even

for a double-stack set-up. An extension

unit is fitted to the bottom shelf supports,

extending them upwards. The stair and in-

termediate shelving installation, together

with the entire operational safety system

meet the ZH 1/428 Directives of the Industrial

Employers’ Liability Insurance Associations.

The specified sizes of the shelving sections –

section widths, shelving depths, support

heights and the regulation dimensions

for main and secondary alleys – provide the

sizes of your shelving system. We are also

SHELVING SYSTEM 06.0 / 06.1DOUBLE-STACK

happy to offer a complete planning and

installation service. Please contact us to

discuss the best way of creating as much

storage space as possible in a compact space.


shelving sysTem 06componenT parTs

Slotted shelves

Shelf for use in unit 06, including 2 shelf mountingsand 2 safety clips per shelf. Slotted at front and rear,slot spacing 25mm. Shelf edges folded 4 x 90° on longedge and 2 x 90° on short edge for strength and safe-

ty. Shelf thickness: 38mm.Made of sheet steel. Colour: galvanized or accordingto colour chart.

Slotted shelves galvanized

Ref no.Shelf widthmm

Shelf depthmm

Carryingcapacitykg

Number ofstrengtheners

55.180 1000 300 110 055.182 1000 400 110 055.184 1000 400 300 155.120 1000 500 100 055.186 1000 500 300 155.188 1000 500 400 255.122 1000 600 100 055.190 1000 600 300 155.192 1000 600 400 255.194 1000 800 100 055.196 1000 800 250 155.198 1000 800 400 255.200 1300 300 100 055.202 1300 400 100 055.204 1300 400 250 155.124 1300 500 100 055.206 1300 500 250 155.208 1300 500 300 255.126 1300 600 100 055.210 1300 600 225 155.212 1300 600 300 255.214 1300 800 100 055.216 1300 800 200 155.218 1300 800 300 2

Slotted shelves painted


Shelf depthmm

Carryingcapacitykg

Number ofstrengtheners

55.181 1000 300 110 055.183 1000 400 110 055.185 1000 400 300 155.121 1000 500 100 055.187 1000 500 300 155.189 1000 500 400 255.123 1000 600 100 055.191 1000 600 300 155.193 1000 600 400 255.195 1000 800 100 055.197 1000 800 250 155.199 1000 800 400 255.201 1300 300 100 055.203 1300 400 100 055.205 1300 400 250 155.125 1300 500 100 055.207 1300 500 250 155.209 1300 500 300 255.127 1300 600 100 055.211 1300 600 225 155.213 1300 600 300 255.215 1300 800 100 055.217 1300 800 200 155.219 1300 800 300 2


Additional strengtheners

Retrofit, to increase shelf load capacity. Strengthenersare snapped into the side edges of the shelf. Max. 2strengtheners can be used in each shelf. See table:Slotted shelves.Made of galvanized sheet steel.


55.380 100055.381 1300

Additional shelf supports

Made of galvanized sheet steel.

Ref no.Shelf depthmm

55.375 30055.376 40055.377 50055.378 60055.379 800

Plain partitions

To subdivide slotted shelves. Plain partitions can beused regardless of shelf spacing.Made of galvanized sheet steel.

Ref no.Heightmm

Shelf depthmm

55.352 150 30055.353 150 40055.146 150 50055.147 150 60055.354 150 800

Shelf dividers

For subdividing slotted shelves. The height of the shelfdividers, inserted at top and bottom, is determined bythe shelf spacing.Made of galvanized sheet steel.


Shelf height topto topmm

55.332 300 25055.333 300 30055.334 300 35055.335 300 40055.336 400 25055.337 400 30055.338 400 35055.339 400 40055.340 500 25055.341 500 300


Shelf height topto topmm

55.342 500 35055.343 500 40055.344 600 25055.345 600 30055.346 600 35055.347 600 40055.348 800 25055.349 800 30055.350 800 35055.351 800 400

Top to top = Measured from / to top edge of shelf.


The frame consists of 2 shelf supports and 2 footplates. Slotted every 25mm for inserting shelf supportsat any height. Parts (supports, foot plates) are sup-plied loose.

Made of 40 x 40mm C-section, cold rolled, 6 edgeturns for high strength and stability. Colour: galva-nized or according to colour chart, foot plate galva-nized, including fixing material.

For shelving 06 galvanized


55.282 200055.284 220055.286 250055.288 3000


Max. carrying capacity: 2800kg

For shelving 06 painted


55.283 200055.285 220055.287 250055.289 3000Max. carrying capacity: 2800kg

Vertical braces

The vertical braces complete the vertical side frame,each with 2 shelf supports. Additional vertical bracesare added to increase the load capacity per shelvingsection. See page 9 for carrying capacities.Made of galvanized sheet steel.

Ref no.Shelving depthmm

55.276 30055.277 40055.278 50055.279 60055.280 800

Diagonal braces

For longitudinal stabilisation of shelf sections in placeof rear panels, including fixing materials. See planinginformation for number of diagonal braces required.Specification: galvanized steel.


Storageheightmm

55.328 1000 2000, 2200,2500, 3000


Storageheightmm

55.330 1300 2000, 2200,2500, 3000


Base cover strips

Base cover strips are fitted to the supports at the rightand left before the lowest shelf is installed and are se-cured by 2 cover caps each.Made of sheet steel. Colour: galvanized or accordingto colour chart.

Base cover strips galvanized

Ref no.For shelf widthsmm

Heightmm

55.356 1000 11055.358 1300 110

Base cover strips painted


Heightmm

55.357 1000 11055.359 1300 110

Shelf front cover strips

The shelf front cover strips are inserted and secured tothe shelf supports using plastic fittings.Made of galvanized sheet steel or colour according tocolour chart.

Shelf front cover strips galvanized


Heightmm

55.360 1000 7555.362 1300 75

Shelf front cover strips painted


Heightmm

55.361 1000 7555.363 1300 75

Extension unit

Extension units are inserted into the existing shelf sup-ports to increase shelf heights and are each securedwith 4 sets of nuts and through-bolts. Extension unitmust be inserted at least 50mm into the existing sup-

ports, after removing the upper shelf.Made of galvanized sheet steel, including fixing mate-rial for one frame.

Ref no.55.383 Extension unit per pair

Levelling plates

We recommend using 3mm per vertical side frame(consisting of 1 x 1mm and 1 x 2mm).Made of PVC. Colour: grey.

Ref no.Widthmm

Depthmm

Thicknessmm

55.175 80 50 155.176 80 50 255.177 80 50 4


Anchoring set

Shelving sections with a depth to height ratio greaterthan 1:5, and 1:4 for shelf sections with hinged doors,and single sections with drawers, must be anchored.

Ref no.55.226 Floor anchor M10 x 90 Per pieceNumber of anchors:For single shelvings: 2 per frameFor double shelvings: 2 per double frame (outer upright supports only)

Side panels

Plain sheet steel side panel, including fixing material.Covers the side slots in the frame. Side panels are ofone-piece design up to 2200mm height and thereafterof two-piece design. They are fitted and secured with

the vertical braces. The braces must be inserted at aheight of 125mm at the bottom and flush at the top.Made of sheet steel, including fixing materials. Colour:according to colour chart.


Storage heightmm

55.300 300 200055.301 300 220055.302 300 250055.303 300 300055.306 400 200055.307 400 220055.308 400 250055.309 400 300055.128 500 200055.129 500 2200


Storage heightmm

55.130 500 250055.312 500 300055.131 600 200055.132 600 220055.133 600 250055.315 600 300055.318 800 200055.319 800 220055.320 800 250055.321 800 3000

Side gratings

Side grating including fixing material. Gratings are se-cured to the vertical side frames. They are of onepiecedesign up to 2200mm height and thereafter of two-piece design.Made of 2.5mm steel wire mesh, width 50 x 50mm,galvanized.


Storage heightmm

55.392 300 200055.393 300 220055.394 300 250055.395 300 300055.396 400 200055.397 400 220055.398 400 250055.399 400 300055.400 500 200055.401 500 2200


Storage heightmm

55.402 500 250055.403 500 300055.404 600 200055.405 600 220055.406 600 250055.407 600 300055.408 800 200055.409 800 220055.410 800 250055.411 800 3000


Partitions

Plain, 2-piece sheet steel partition. Installed betweenshelf supports and secured at right and left by the shelfmountings.Made of sheet steel. Colour: galvanized or accordingto colour chart.

Partitions galvanized


Storage heightmm

55.232 300 200055.234 300 220055.236 300 250055.238 300 300055.244 400 200055.246 400 220055.248 400 250055.250 400 300055.150 500 200055.152 500 2200


Storage heightmm

55.154 500 250055.256 500 300055.156 600 200055.158 600 220055.160 600 250055.262 600 300055.268 800 200055.270 800 220055.272 800 250055.274 800 3000

Partitions painted


Storage heightmm

55.233 300 200055.235 300 220055.237 300 250055.239 300 300055.245 400 200055.247 400 220055.249 400 250055.251 400 300055.151 500 200055.153 500 2200


Storage heightmm

55.155 500 250055.257 500 300055.157 600 200055.159 600 220055.161 600 250055.263 600 300055.269 800 200055.271 800 220055.273 800 250055.275 800 3000

Partition grilles

The grilles are fitted into the side frame. They are sta-bilized by the supports of the shelves. Up to a heightof 2200mm the partition grilles are in one piece, abovethis in two pieces.Made of 2.5mm steel wire mesh, width 50 x 50mm,galvanized.


Storage heightmm

55.412 300 200055.413 300 220055.414 300 250055.415 300 300055.416 400 200055.417 400 220055.418 400 250055.419 400 300055.420 500 200055.421 500 2200


Storage heightmm

55.422 500 250055.423 500 300055.424 600 200055.425 600 220055.426 600 250055.427 600 300055.428 800 200055.429 800 220055.430 800 250055.431 800 3000

Rear panels

Rear panel covers for storage wall sections. Also stabi-lise the shelf sections longitudinally. Two-part rearpanels are bolted to the vertical frames and include fix-ing materials and plastic edging.Made of sheet steel. Colour: galvanized or accordingto colour chart. Plastic edging in black.

Rear panels galvanized


Storageheightmm

55.134 1000 200055.136 1000 220055.138 1000 250055.224 1000 3000


Storageheightmm

55.140 1300 200055.142 1300 220055.144 1300 250055.326 1300 3000


Rear panels painted


Storageheightmm

55.135 1000 200055.137 1000 220055.139 1000 250055.225 1000 3000


Storageheightmm

55.141 1300 200055.143 1300 220055.145 1300 250055.327 1300 3000

Rear gratings

Rear grating for storage wall section. Diagonal bracesmust be fitted for longitudinal stabilisation. Gratingsare bolted to the frame and include fixing material.Rear gratings are of one-piece design up to 2200mm

and thereafter of two-piece design.Made of 3mm steel wire, mesh width 50 x 50mm, gal-vanized.


Storageheightmm

55.384 1000 200055.385 1000 220055.386 1000 250055.387 1000 3000


Storageheightmm

55.388 1300 200055.389 1300 220055.390 1300 250055.391 1300 3000

Attention:Diagonal braces are necessary for the longitudinal stabilisation.

Hinged doors


Made of sheet steel. Colour: according to colourchart


Door heightmm

55.757 1000 100055.758 1000 200055.759 1000 220055.771 1000 2500


Door heightmm

55.761 1300 100055.762 1300 200055.763 1300 220055.772 1300 2500

Shelf depth with hinged doors = horizontal frame depth + 30mmPlease take note of the planning information.

shelf storage units.recessed pull handl e lock. Doors can be retrofitted to


Sliding doors


unhindered access to a full shelving unit. Sliding doorscan be retrofitted to shelf storage units.Made of sheet steel. Colour: according to colourchart.


Storage heightmm

55.765 2x 1000 200055.766 2x 1000 220055.767 2x 1000 250055.768 2x 1300 200055.769 2x 1300 220055.770 2x 1300 2500Shelf depth with hinged doors = horizontal frame depth + 30. Please take note of the planning information.Storage unit depth with sliding doors = vertical frame depth + 105mmAttention: Locking doors must always be on thr right.Hinged doors and roller-shutter fronts cannot be fitted immediately adjacent to sliding doors.



Depthmm

55.779 2000 10555.780 2200 10555.781 2500 105

Drawers

Drawers include pre-fitted full-depth extensions andassembly material for fitting to the storage unit. Draw-ers can be fitted at any time. Drawers can only be fit-ted to 1000 x 500mm storage units. Drawer carrying

capacity with evenly distributed load.Made of all-steel sheet construction. Colour: light greyRAL 7035.


Useful heightmm

Useful widthmm

Useful depthmm

Carryingcapacitykg

55.172 75 60 918 459 5055.173 100 83 918 459 5055.174 150 133 918 459 50Attention:Single storage units which will be fitted with drawers must be anchored according to assembly instructions.

Single safety catch per drawer

Ref no.13.026 Single safety catch per drawer




Ref no.Lengthmm

Heightmm


Packing unitspieces

18.926 105 22 14 118.927 210 22 14 118.929 1000 22 14 1


Ref no.Lengthmm

Heightmm


Packing unitspieces

18.930 105 22 14 1018.931 210 22 14 10



Ref no.Label sizemm



Useful drawer dimension: width: 54E = 918 mm, depth: 27E = 459 mm

Ref no.For front heightmm

80.002 75, 100, 150

6 trough-shaped parts: 4 grooves20 trough dividers: 4 grooves6 trough-shaped parts: 3 grooves10 trough dividers: 3 grooves6 trough-shaped parts: 2 grooves10 trough dividers: 2 grooves


80.046 7580.047 100, 125

12 plastic boxes: 150 x 75 mm12 plastic boxes: 150 x 150 mm


80.049 7580.050 100, 150

18 plastic boxes: 150 x 150 mm


80.433 7580.434 100, 12580.435 150, 175

3 slotted partitions: 27E3 dividers: 12E


80.440 7580.441 100, 12580.442 150, 175

4 slotted partitions: 27E4 dividers: 9E


80.016 7580.017 100, 12580.018 150, 175

4 slotted partitions: 27E2 dividers: 9E3 dividers: 12E





Common lock




Release tool


1

2


Smart Lock


e-Lock





OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Shelf storage walls M10Inroduction 80

Ordering examples 84

Component parts 91

File unit and file storage systems 99


Shelf storage walls maximise storage space.

They are versatile enough to suit a variety of

applications. The ideal storage system can be

designed by choosing from the various options

available. This includes different shelves with

weight capacities from 70 to 240 kg, doors,

drawers, partitioning, shelf dividers, and base

covers.


SHELF STORAGE WALLS M10

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



Shelf frontsFor storing loose material. The shelf fronts slot in andare fixed to the shelf supports.

PartitionsFor sub-dividing slotted shelves. Available in variousheights.

DrawersFor storing small parts. Available for shelving size1000 x 500mm.

LabellingVarious types of labelling are available.

Closing end panelServes as a plain filler panel to conceal the rows ofslots in the side panel. Can be fitted without screws.

Side panelWith a triangular folded reinforcing panel at the frontfor high strength.

Recessed pull handle for hinged doorsErgonomically formed for maximum comfort andsecurity. With secure cylinder lock.

Lock-down cylinder for sliding doorsSimple operation by means of a push-cylinder lock.The cylinder is pushed down to lock the sliding door.

COMPONENTS

ShelvesThe position of the shelves can be quickly and easilychanged. The shelves fit on shelf holders withoutscrewing.

Base cover stripUsed to prevent dust collecting. Simply slots in placewithout screws.

Set of foot platesEach side panel is supplied complete with one set offoot plates.


Dimensions M10

SHELF STORAGE WALLS M10DIMENSIONS

A Section widths Actual dimensions 850mm 1000mm 1255mmFor shelf widths 850mm 1000mm 1255mm

B Storage wall depths Actual dimensions 330mm 380mm 430mm 530mm 630mmFor shelf depths 300mm 350mm 400mm 500mm 600mmWith hinged doors 360mm 410mm 460mm 560mm 660mmWith side panel covers 350mm 400mm 450mm 550mm 650mmWith sliding doors 435mm 485mm 535mm 635mm 735mm

C Storage wall heights Actual dimensions 2000mm 2200mm 2500mmWith hinged doors 2000mm 2200mm 2500mmWith sliding doors 2000mm 2200mm 2500mm

D Shelf spacing Top to top shelf (number of visible divider slots + 1) x 25mmE Storage wall lengths Number of section widths + 50mm (with and without side panel covers)

Example: 2 x 850mm + 2 x 1000mm + 1 x 1255mm + 50mm = 5005mmSlots Side panels are slotted every 25mm to fit the shelf supports.

Shelves are slotted every 15mm for partitioning with dividers and separators.

Type description (shelf bottom)

M 10/610 (not reinforced)

M 10/612 (with 2 strengtheners)

M 10/641 (with 1 strengthener)M 10/611 (with 1 strengthener)

M 10/640 (not reinforced)


Planning information / Carrying capacities

Carrying capacities

PLANNING INFORMATION / CARRYING CAPACITIES

• The carrying capacities shown are only valid if the first and every followingthird section are fitted with rear panels or diagonal braces.

Securing requirementsShelving sections with a depth to height ratio greater than 1:5, and 1:4 for shelf sec-tions with hinged doors, and single sections with drawers, must be anchored.


Add-on side rightBasic unit left Sliding door Hinged doorSliding door • –Hinged door – •Drawers1 • •

Explanations: • possible – not possible1 For fitting behind front assembly

Securing requirementsImmediately adjacent front-mounting variants.

Space between shelves Carrying capacity per storage wall Carrying capacity per storage wallsection stabilizing with diagonal brace section stabilizing with rear panel

mm kg kg150 800 1050300 770 1000450 740 950600 710 900750 max. 680 850• With varying spaces between shelves the largest spacing measurement is valid.• Carrying capacity per storage wall section (= maximum section load). Safety factor 1.65 according to SIA.



shelf sTorage walls m10ordering examples

Shelf M10 / shelf width 850mm

Basic section Add-on section

Shelving depth 330mm, with plain shelves, painted

Ref no. Section typeStorage heightmm

Shelf widthmm

Shelf depthmm Number of shelves

48.500 Basic section 2000 850 300 548.501 Add-on section 2000 850 300 548.502 Basic section 2200 850 300 548.503 Add-on section 2200 850 300 548.504 Basic section 2500 850 300 648.505 Add-on section 2500 850 300 6Carrying capacity per shelf: 90kg



Shelf widthmm





Shelf widthmm





Shelf widthmm


48.518 Basic section 2000 850 500 548.519 Add-on section 2000 850 500 548.520 Basic section 2200 850 500 548.521 Add-on section 2200 850 500 548.522 Basic section 2500 850 500 648.523 Add-on section 2500 850 500 6


Carrying capacity per shelf: 170kg



Shelf widthmm



Shelving depth 330mm, with slotted shelves, painted


Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm






Shelf widthmm



Additional diagonal brace (1 diagonal brace per 3 shelving sections)





Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm







Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm






Shelf widthmm








Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm







Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm





Shelf widthmm






Shelf widthmm





componenT parTs

Side panels

With triangular front edge finish. Slotted at 25mm in-crements for fitting the shelf supports. Including set offoot plate.Made of sheet steel. Colour: according to colour chart.Set of foot plates galvanized.

Ref no.For shelf depthsmm

Widthmm

Depthmm

Heightmm

43.050 300 30 330 200043.051 300 30 330 220043.052 300 30 330 250043.054 350 30 380 200043.055 350 30 380 220043.056 350 30 380 250043.058 400 30 430 200043.059 400 30 430 220043.060 400 30 430 250043.062 500 30 530 200043.063 500 30 530 220043.064 500 30 530 250043.066 600 30 630 200043.067 600 30 630 220043.068 600 30 630 2500

Side panel covers

Closing plain panel to conceal the rows of slots in theside panel. Can be fitted left or right.Made of sheet steel. Colour: according to colourchart.


Widthmm

Depthmm

Heightmm

48.060 300 30 350 200048.061 300 30 350 220048.062 300 30 350 250048.063 350 30 400 200048.064 350 30 400 220048.065 350 30 400 250048.066 400 30 450 200048.067 400 30 450 220048.068 400 30 450 250048.069 500 30 550 200048.070 500 30 550 220048.071 500 30 550 250048.072 600 30 650 200048.073 600 30 650 220048.074 600 30 650 2500


Rear panels

Rear panels cover the back of shelf sections and serveas stabilizers lengthwise. They are screwed to the sidepanels. Incl. fixing material.Made of sheet steel. Colour: according to colourchart.


Heightmm Section type

46.016 850 2000 Basic sections46.017 850 2200 Basic sections46.053 850 2500 Basic sections (2 pieces)43.075 1000 2000 Basic sections43.076 1000 2200 Basic sections43.077 1000 2500 Basic sections (2 pieces)46.018 1255 2000 Basic sections46.019 1255 2200 Basic sections46.049 1255 2500 Basic sections (2 pieces)46.020 850 2000 Add-on sections46.021 850 2200 Add-on sections46.055 850 2500 Add-on sections (2 pieces)43.088 1000 2000 Add-on sections43.089 1000 2200 Add-on sections43.090 1000 2500 Add-on sections (2 pieces)46.022 1255 2000 Add-on sections46.042 1255 2200 Add-on sections46.051 1255 2500 Add-on sections (2 pieces)

Anchoring set

Shelving sections with a depth to height ratio greaterthan 1:5, and 1:4 for shelf sections with hinged doors,and single sections with drawers, must be anchored.

Ref no.130.555 Floor anchor M8 x 75 Per pieceNumber of anchors:For single shelving sections: 2 per frameFor double shelving sections: 2 per double frame (outer upright supports only)

Levelling plates

We recommend using 3mm per side panel (consistingof 1 x 1mm and 1 x 2mm).Specification: PVC. Colour: grey.

Ref no.Widthmm

Depthmm

Thicknessmm

44.532 98 44.5 144.533 98 44.5 244.534 98 44.5 4Levelling plates are unnecessary in office settings.

Diagonal braces

For longitudinal stabilisation of shelf sections in placeof rear panels.Made of galvanized steel, including fixing materials.


Storage heightmm

43.039 850, 1000, 1255 2000, 2200, 2500


Number of diagonal braces, see planning information.

Floor front cover strip

The covers are fitted in the third slot from the bottomwith shelf supports. They are unnecessary if doors arefitted.Made of sheet steel. Colour: black NCS S 9000-N.


Heightmm

46.023 850 5043.099 1000 5046.024 1255 50

Hinged doors


Made of sheet steel. Colour: according to colourchart.


Heightmm

45.444 850 100045.445 850 200045.446 850 220045.486 850 250045.448 1000 100045.449 1000 2000


Heightmm

45.450 1000 220045.487 1000 250045.452 1255 100045.453 1255 200045.454 1255 220045.488 1255 2500

Shelf depth with hinged doors = horizontal frame depth + 30mm

Sliding doors

Each pair of sliding doors closes a two-shelf section.Doors run easily and quietly on rollers in tracks fittedat top and bottom at the side panels. Equipped withrotary cylinder lock. Doors open to give unhindered ac-

cess to a full shelving unit. Sliding doors can be retro-fitted to shelf storage units.Made of sheet steel. Colour: according to colourchart.


Heightmm

45.456 2 x 850 200045.457 2 x 850 220045.458 2 x 850 250045.459 2 x 1000 200045.460 2 x 1000 2200


Heightmm

45.461 2 x 1000 250045.462 2 x 1255 200045.463 2 x 1255 220045.464 2 x 1255 2500

shelf storage units.recessed pull handle lock. Doors can be retrofitted to


End cover plates to sliding doorFor basic units in combination with storage wall endpanels. Can be fitted on left or right.Specification: sheet steel. Colour: according to colourchart.


Depthmm

45.483 2000 10545.484 2200 10545.485 2500 105Shelf depth with hinged doors = horizontal frame depth + 105mmAttention:Locking doors must always be on the right. Hinged doors cannot be fitted immediately adjacent to slidingdoors.

Shelves plain

Made of sheet steel, incl. shelf supports. Colour: ac-cording to colour chart.

Shelves plain painted

Ref no.Widthmm

Depthmm

Carryingcapacitykg Type

46.087 850 300 90 M10 / 61046.097 850 300 170 M10 / 61146.088 850 350 90 M10 / 61046.000 850 350 170 M10 / 61146.089 850 400 90 M10 / 61046.001 850 400 170 M10 / 61146.090 850 500 50 M10 / 61046.002 850 500 170 M10 / 61146.101 850 500 240 M10 / 61246.091 850 600 50 M10 / 61046.043 850 600 170 M10 / 61146.102 850 600 240 M10 / 61243.189 1000 300 80 M10 / 61043.192 1000 300 160 M10 / 61143.190 1000 350 80 M10 / 61043.193 1000 350 160 M10 / 61143.191 1000 400 80 M10 / 61043.194 1000 400 160 M10 / 61143.187 1000 500 40 M10 / 61043.195 1000 500 160 M10 / 61143.199 1000 500 220 M10 / 61243.188 1000 600 40 M10 / 61043.196 1000 600 160 M10 / 61143.200 1000 600 220 M10 / 61246.092 1255 300 70 M10 / 61046.098 1255 300 140 M10 / 61146.093 1255 350 70 M10 / 61046.003 1255 350 140 M10 / 61146.094 1255 400 70 M10 / 61046.004 1255 400 140 M10 / 61146.095 1255 500 30 M10 / 61046.005 1255 500 140 M10 / 61146.105 1255 500 200 M10 / 61246.096 1255 600 30 M10 / 61046.044 1255 600 140 M10 / 61146.106 1255 600 200 M10 / 612

Shelves plain galvanized

Ref no.Widthmm

Depthmm


43.244 850 350 90 M10 / 61043.245 850 500 170 M10 / 61143.038 1000 350 80 M10 / 61043.037 1000 500 160 M10 / 61143.334 1255 350 70 M10 / 61043.335 1255 500 140 M10 / 611


Shelves slotted

Made of sheet steel, incl. shelf supports. Slots at15mm increments.Colour: according to colour chart.

Shelves slotted painted

Ref no.Widthmm

Depthmm


46.135 850 300 150 M10 / 64046.137 850 300 230 M10 / 64146.006 850 350 150 M10 / 64046.138 850 350 230 M10 / 64146.007 850 400 150 M10 / 64046.139 850 400 230 M10 / 64146.008 850 500 150 M10 / 64046.140 850 500 230 M10 / 64146.045 850 600 150 M10 / 64046.141 850 600 230 M10 / 64143.277 1000 300 120 M10 / 64043.282 1000 300 200 M10 / 64143.278 1000 350 120 M10 / 64043.283 1000 350 200 M10 / 64143.279 1000 400 120 M10 / 64043.284 1000 400 200 M10 / 64143.280 1000 500 120 M10 / 64043.285 1000 500 200 M10 / 64143.281 1000 600 120 M10 / 64043.286 1000 600 200 M10 / 64146.136 1255 300 90 M10 / 64046.142 1255 300 170 M10 / 64146.009 1255 350 90 M10 / 64046.143 1255 350 170 M10 / 64146.010 1255 400 90 M10 / 64046.144 1255 400 170 M10 / 64146.011 1255 500 90 M10 / 64046.145 1255 500 170 M10 / 64146.046 1255 600 90 M10 / 64046.146 1255 600 170 M10 / 641

Shelf supports

Identical bottom support for both types of shelf.

Ref no.101.749 Additional shelf support clips (4x)


Dividers

For partitioning of the slotted shelves.Specification: sheet steel. Colour: light greyRAL 7035.

Dividers


Heightmm

100.447 300 95100.448 300 145100.449 300 195100.452 350 95100.453 350 145100.454 350 195100.465 400 95100.466 400 145100.467 400 195100.483 500 95100.484 500 145100.485 500 195100.493 600 95100.494 600 145100.495 600 195The spacing between the shelves is at least 25mm more than the height of the separators.

Partitions

For partitioning of the slotted shelves. The dividers fitinto the slots of the upper and lower shelves and theheight of the divider and the shelf spacing should cor-respond.Specification: sheet steel. Colour: light grey RAL7035.


Heightmm

100.574 300 250100.576 300 300100.577 300 325100.578 300 350100.580 300 400100.594 350 250100.596 350 300100.597 350 325100.598 350 350100.600 350 400100.614 400 250100.616 400 300


Heightmm

100.617 400 325100.618 400 350100.620 400 400100.655 500 250100.658 500 300100.661 500 350100.664 500 400100.702 600 250100.704 600 300100.706 600 350100.708 600 400

Useful space between shelves is equal to the height of the dividers.

Guide rails

Guide rails for fitting on slotted shelves where storagecontainers, plastic drawers and shelf boxes are re-quired.Made of sheet steel. Colour: light grey RAL 7035.


Heightmm

43.339 300 2543.340 350 2543.341 400 25


Heightmm

43.342 500 2543.343 600 25

Shelf fronts

Incl. 2 shelf supports and fixing material.Specification: sheet steel. Colour: light grey RAL7035.


Heightmm

46.036 850 9544.769 1000 9546.039 1255 95


Drawers




Useful heightmm

Useful widthmm

Useful depthmm

Carryingcapacitykg




Sliding tray units

The end and middle partitions are fitted with guiderails to accommodate the sliding tray.Partitions are made of sheet steel. Colour: grey NCS S2502-R.Tray and dividers made of anti-static ABS plas-tic. Colour: grey NCS S 2502-B.

For sizes DIN A4Spacing height between shelves = 325mm = 5 com-partments. Fits shelves with depths of 350mm. Slidingtray size A4 cannot be partitioned.

Ref no.Widthmm

Depthmm

Heightmm

20.128 End partition left or right 350 31520.129 Middle partition 350 31520.130 Sliding tray for size A4 220 340 3420.131 10 labels

For sizes DIN C4Spacing height between shelves = 325mm = 9 com-partments. Fits shelves with depths of 350mm. Slidingtray size C4 cannot be partitioned to sizes C5 and C6.

Ref no.Widthmm

Depthmm

Heightmm

20.128 End partition left or right 350 31520.129 Middle partition 350 31520.132 Sliding tray for size C4 234 340 3420.133 Divider for sizes C5 and C620.134 Label holders20.135 9 labels, white





Ref no.Lengthmm

Heightmm


Packing unitspieces

18.926 105 22 14 118.927 210 22 14 118.929 1000 22 14 1


Ref no.Lengthmm

Heightmm


Packing unitspieces

18.930 105 22 14 1018.931 210 22 14 10


Ref no.Label sizemm




file uniT and file sTorage sysTems

Pull-out file suspension frame

Suitable for A4 suspension files. Middle frame adjust-able for other sizes. Maximum load: 60kg. With as-sembly material.Specification: Sheet-steel with stove-enemal finish.Colour: grey NCS S 2502-R.

Ref no.Section widthmm

Shelf depthmm Picture

Number ofcentre struts

35.100 850 350 1 232.350 1000 350 3 235.101 1255 350 2 335.102 850 400 1 232.361 1000 400 3 235.103 1255 400 2 335.104 850 500 1 232.369 1000 500 3 235.105 1255 500 2 3

Pull-out shelves

With full extension. Maximum load: 50kg.Specification: Sheet-steel with stove-enemal finish.Colour: grey NCS S 2502-R. With assembly material.


Shelf depthmm

Useful widthmm

Useful depthmm

35.109 850 350 680 33732.723 1000 350 875 33735.110 1255 350 1040 33735.111 850 400 680 33732.713 1000 400 875 33735.112 1255 400 1040 33735.113 850 500 680 43732.718 1000 500 875 43735.114 1255 500 1040 437

Assembly material

Ref no.750.260 Both side inside panelFor each unit 1 set

Pull-out file suspension frames latch

Ref no.727.176 Pull-out file suspension frames latchFor each extension frame 1 set

For each unit 1 set


Lateral profile C700.01

For file storage system: Class-O-Rama 2, Datox-EDPfiles and Accodata suspension rails 50085. Incl. 1 setshelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.124 850 35032.402 1000 35035.125 1255 35035.126 850 40032.411 1000 40035.127 1255 40035.128 850 50032.420 1000 50035.129 1255 500


For file storage system: Accodata 50086, Slim Control,Voko and Elba-suspension files DIN A4. Incl. 1 set shelfsupports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.137 850 35032.517 1000 35035.138 1255 35035.139 850 40032.526 1000 40035.140 1255 40035.141 850 50032.535 1000 50035.142 1255 500


For file storage system: Vetro-Lateral files A4 lateral,(985 x 450 A4 lateral and transparencies). Incl. 1 setshelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.143 850 35032.559 1000 35035.144 1255 35035.145 850 40032.568 1000 40035.146 1255 40035.147 850 50032.578 1000 50035.148 1255 500


For file storage system: Docu-Mate (Wright line) forcassettes, print-out files and suspension files, tape-seal rings for models IBM, Nashua, Wright-line, etc. In-cl. 1 set shelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.130 850 35032.424 1000 35035.131 1255 35035.132 850 40032.433 1000 40035.133 1255 40035.134 850 50032.442 1000 50035.135 1255 500



For file storage system: Datox EDP files, Monopendexsuspension frames and files, ELBA-centre point sus-pension files 91460, Leitz and Eichner suspensionfiles. Incl. 1 set shelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.149 850 35032.581 1000 35035.150 1255 35035.151 850 40032.590 1000 40035.152 1255 40035.153 850 50032.599 1000 50035.154 1255 500





Common lock




Release tool


1

2


Smart Lock


e-Lock





OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Heavy-duty pull-out shelving system M210Introduction 106

Component parts 108


Heavy-duty pull-out shelving save space

and are ideal for storing heavy items and

loading by means of lifting gear. They can

take unit loads up to 9000kg. There are

three standard unit widths, three shelving

depths and four shelving heights. Side

and rear panels and covers may be added

to the heavy-duty pull-out shelving.


HEAVY-DUTY PULL-OUT SHELVINGSYSTEM M210

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



Heavy-duty pull-out shelving system M 210 mustalways be anchored!

• The shown carrying capacities are only valid, if always the first and every following third section is equippedwith rear panels or diagonal braces.

Masse M210


DIMENSIONS / PLANNING INFORMATION

A Section widths Actual dimensions 890mm 1090mm 1290mmB Frame width Actual dimensions 80mmC Storage depths Actual dimensions 860mm 1060mm 1260mm

With sliding doors 965mm 1165mm 1365mmD Storage heights Actual dimensions 1510mm 2010mm 2210mm 2510mm

With sliding doors – 2015mm 2215mm 2515mmE Storage length Number of section widths (A) + number of frame widths ( B ) + 120mm

Example: 4 x 1290mm + 5 x 80mm + 120mm = 5680mmF Base plates Width 200mmG Depth 90mmH Minimum 105mm for fixed frame

265mm for extension frame EA315mm for extension frame VA

I Minimum 200mm for fixed and extension frame EA without individual extension stops300mm for extension frame VA without individual extension stops400mm for all extension frame (EA and VA) with individual extension stops

K 65mm for fixed and extension frameL 50mm for top shelfM Hole spacing 100mmN With storage depths 860mm 1060mm 1260mm

Extension depths EA 530mm 670mm 830mm EA = Normal extension 65% extensionExtension depths VA 810mm – 1210mm VA = Full extension100% extension


A A AA B BBB60

E

F

A AB

HI

KL

M

C

60B

GG

D

10

C

N

A

105

Securing requirements

Width Depth HeightType mm mm mm

Pallet I 800 1200 150

Width Depth HeightType mm mm mm

Pallet 0 800 1200 150I 1200 800 150II 1200 1000 150III 1000 800 150

Longitudinal storage of pallets Transvers storage of pallets


heavy-duTy pull-ouT shelving sysTemcomponenT parTs


Side frames are perforated at intervals of 100mm to al-low the installation of pull-out and fixed frames andtop panels. Front and back upright columns are weld-ed together with horizontal and diagonal braces to

make a rigid construction.Made of sheet steel pressed profiles. Colour: accord-ing to colour chart.


Widthmm

Heightmm

Max. section loadkg

73.000 860 80 1500 900073.001 860 80 2000 900073.002 860 80 2200 900073.003 860 80 2500 900073.010 1060 80 1500 900073.011 1060 80 2000 900073.012 1060 80 2200 900073.013 1060 80 2500 900073.020 1260 80 1500 900073.021 1260 80 2000 900073.022 1260 80 2200 900073.023 1260 80 2500 9000Attention:4 fixing bolts are required per vertical side frame.

Floor anchoring

Ref no.112.991 Floor anchor M10/40 Per piece

Levelling plates

We recommend using 3mm per vertical side frame(consisting of 1 x 1mm and 1 x 2mm).Specification: PVC. Colour: grey.

Ref no.Widthmm

Depthmm

Thicknessmm

73.005 200 100 173.006 200 100 273.007 200 100 4

Vertical side frame connections

The side frame connectors are bolted to the sideframes at the front and back. Incl. fixing material.Specification: sheet metal. Colour: according to colourchart.


73.060 89073.061 109073.062 1290Per pair


Diagonal braces

Diagonal braces provide lateral stability to the systemand are fitted to every 4th unit. Incl. fixing material.Specification: galvanized steel.

Ref no.

For sectionwidthmm

Storage heightmm

73.100 890 150073.101 890 200073.102 890 220073.103 890 250073.110 1090 150073.111 1090 2000

Ref no.

For sectionwidthmm

Storage heightmm

73.112 1090 220073.113 1090 250073.120 1290 150073.121 1290 200073.122 1290 220073.123 1290 2500

Rear panels

The rear panels are bolted to the side frames and pro-vide lateral stability. Diagonal braces are not requiredif rear panels are fitted.Specification: sheet steel. Colour: according to colourchart.

For basic sections

Ref no.

For sectionwidthmm

Widthmm

Storageheightmm

73.530 890 1000 150073.531 890 1000 200073.532 890 1000 220073.533 890 1000 250073.540 1090 1200 150073.541 1090 1200 2000

Ref no.

For sectionwidthmm

Widthmm

Storageheightmm

73.542 1090 1200 220073.543 1090 1200 250073.550 1290 1400 150073.551 1290 1400 200073.552 1290 1400 220073.553 1290 1400 2500

For add-on sections

Ref no.

For sectionwidthmm

Widthmm

Storageheightmm

73.535 890 1000 150073.536 890 1000 200073.537 890 1000 220073.538 890 1000 250073.545 1090 1200 150073.546 1090 1200 2000

Ref no.

For sectionwidthmm

Widthmm

Storageheightmm

73.547 1090 1200 220073.548 1090 1200 250073.555 1290 1400 150073.556 1290 1400 200073.557 1290 1400 220073.558 1290 1400 2500

Fixed frames

Fixed frames can also be used instead of top panels.The fixed frames are bolted to the side frames. Incl. fix-ing material.Specification: welded pressed profiles. Colour: accord-ing to colour chart.


Shelving depthmm

Useful widthmm

Useful depthmm

Carryingcapacitykg

73.030 890 860 800 840 100073.031 890 1060 800 1040 90073.032 890 1260 800 1240 80073.040 1090 860 800 840 100073.041 1090 1060 1000 1040 90073.042 1090 1260 1000 1240 80073.050 1290 860 1200 840 100073.051 1290 1060 1200 1040 90073.052 1290 1260 1200 1240 800


Sheet metal cover for fixed frames

Sheet metal cover with welded-on angles fitted intofixed frame.Specification: sheet metal 2mm thick. Colour: accord-ing to colour chart


Shelving depthmm

Useful depthmm

73.130 890 860 84073.131 890 1060 104073.132 890 1260 124073.140 1090 860 84073.141 1090 1060 104073.142 1090 1260 124073.150 1290 860 84073.151 1290 1060 104073.152 1290 1260 1240

Wooden insert for fixed frames

Fits into the fixed frame.Specification: chipboard, 40mm thick.


Shelving depthmm

Useful depthmm

73.430 890 860 84073.431 890 1060 104073.432 890 1260 124073.440 1090 860 84073.441 1090 1060 104073.442 1090 1260 124073.450 1290 860 84073.451 1290 1060 104073.452 1290 1260 1240

Top shelves

The top shelves cover the top of unit and are fitted be-tween the side frames, giving protection from dust. In-cl. fixing material.Specification: sheet metal. Colour: according to colourchart.


Shelving depthmm

Useful depthmm

Carryingcapacitykg

73.650 890 860 840 20073.651 890 1060 1040 15073.652 890 1260 1240 10073.660 1090 860 840 20073.661 1090 1060 1040 15073.662 1090 1260 1240 10073.670 1290 860 840 20073.671 1290 1060 1040 15073.672 1290 1260 1240 100

Column guard

Column guards provide extra protection to the ex-posed column bases of the side frames. With 4 holesfor floor anchoring.Specification: sheet steel, St 37-2. Colour: yellow /black.

Ref no.Widthmm

Depthmm

Heightmm

43.537 PC/6 166 166 322Incl. 4 floor anchors M10 x 110mm (hole depth 120mm).


Extension frames for normal and total extension

Equipped with a lock-in lock-out system which securesthe frame in closed or fully extended positions. Therunners are bolted to the side frames. Incl. fixing ma-terial.Made of welded pressed profiles. Colour: according tocolour chart.

Normal extension


Shelving depthmm

Useful widthmm

Useful depthmm

Carryingcapacitykg

73.070 890 860 800 810 100073.071 890 1060 800 1010 90073.072 890 1260 800 1210 80073.080 1090 860 1000 810 100073.081 1090 1060 1000 1010 90073.082 1090 1260 1000 1210 80073.090 1290 860 1200 810 100073.091 1290 1060 1200 1010 90073.092 1290 1260 1200 1210 800EA = Normal extension, 65% extension possible

Total extension


Shelving depthmm

Useful widthmm

Useful depthmm

Carryingcapacitykg

45.008 890 1260 800 1210 80045.009 1290 860 1200 810 1000VA = Full extension, 100% extension possible

Wooden insert for pull-out frames

In two parts to insert into the pull-out frame. Made ofchipboard, 40mm thick.

Normal extension


Shelving depthmm

Useful widthmm

Useful depthmm

73.470 890 860 850 81073.471 890 1060 850 101073.472 890 1260 850 121073.480 1090 860 1050 81073.481 1090 1060 1050 101073.482 1090 1260 1050 121073.490 1290 860 1250 81073.491 1290 1060 1250 101073.492 1290 1260 1250 1210EA = Normal extension, 65% extension possible

Total extension


Shelving depthmm

Useful widthmm

Useful depthmm

45.252 890 1260 850 121045.253 1290 860 1250 810VA = Full extension, 100% extension possible


sheet metal insert for fixed frames

With raised edges on 3 sides, 30mm high. Sheet met-al covers with welded-on angles fitted into pull-outframe.Specification: sheet metal, 2mm thick. Colour: accord-ing to colour chart.

Normal extension


Shelving depthmm

Useful widthmm

Useful depthmm

73.270 890 860 800 81073.271 890 1060 800 101073.272 890 1260 800 121073.280 1090 860 1000 81073.281 1090 1060 1000 101073.282 1090 1260 1000 121073.290 1290 860 1200 81073.291 1290 1060 1200 101073.292 1290 1260 1200 1210EA = Normal extension, 65% extension possible

Total extension


Shelving depthmm

Useful widthmm

Useful depthmm

45.250 890 1260 850 121045.251 1290 860 1250 810VA = Full extension: 100% extension possible

Side panels

The side panels are bolted to the side frames. Incl. fix-ing material.Specification: sheet metal. Colour: according to colourchart.


Widthmm

Storage heightmm

73.500 860 840 150073.501 860 840 200073.502 860 840 220073.503 860 840 250073.510 1060 1040 150073.511 1060 1040 200073.512 1060 1040 220073.513 1060 1040 250073.520 1260 1240 150073.521 1260 1240 200073.522 1260 1240 220073.523 1260 1240 2500

Sliding doors



Ref no.

For sectionwidthmm / E

For storageheightmm

45.474 2 x 890 200045.475 2 x 890 220045.476 2 x 890 250045.477 2 x 1090 200045.478 2 x 1090 220045.479 2 x 1090 2500

Ref no.

For sectionwidthmm / E

For storageheightmm

45.480 2 x 1290 200045.481 2 x 1290 220045.482 2 x 1290 2500

Storage unit depth with sliding doors: horizontal frame depth + 105mmLocking doors must always be on the right.

End cover plates to sliding doorsFor basic units in combination with storage wall endpanels. Can be fitted on left or right.Made of sheet steel. Colour: according to colourchart.


Depthmm

45.495 2000 10545.496 2200 10545.497 2500 105



OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Pallet rackingsIntroduction 116

Component parts 119

Barrel rackingsComponent parts 124

Cantilever shelvingIntroduction 127


Pallet rackings are used to store palletized

goods for the most part. Pallets and contai-

ners are stacked in a space-saving fashion

one above the other and side by side. From

single racks to major installations, the

elements can be assembled to suit the avai-

Sapphire blueRAL 5003

Red orangeeRAL 2001


lable space and the material being stored.

The pallet racks are designed to provide

almost any carrying capacity required.


PALLET RACKINGS


DIMENSIONS

Dimensions pallet rackings

A Section width For longitudinal storage 1825mm 2700mmFor transvers storage 1350mm 2700mm

B Frame width 81mm (actual dimension 80.6mm)C Rack depths For pallet storage:

800mm + ( 2 x 15mm ) for protruding base plates = 830mm1100mm + ( 2 x 15mm ) for protruding base plates = 1130mm

D Rack heights 2000mm 2500mm 3000mm 3500mm4000mm 4500mm 5000mm 5500mm6000mm 6500mmOther heights on request.Rack heights + 6 mm for base plate.

E Rack length Number of section widths ( A ) + number of frame widths ( B ) + 55mmExample: 2 x 2700mm + 3 x 81mm + 55mm = 5698mm

F Base plate Width 135mmG Base plate Depth 110mmH Minimum = 250mmK Minimum = 250mmL1 Minimum = 150mmL2 Minimum = 500mmM Hole spacing 50mm


Carrying capacities

PALLET RACKINGSDIMENSIONS AND CARRYING CAPACITIES FOR PALLETS

Dimensions pallet rackings

Max. distance between longitudinal support Carrying capacity per frameOK - OK Type 80mm kg1000 112001250 106751500 101501750 * 92752000 * 84002250 * 73752500 * 6600

* Only permitted with diagonal braces, on request.

At least two pairs of longitudinal supports must be fitted per rack unit, one above the other.

Pallet size Section width FrameWidth Depth 2 pallets 3 pallets depth

Type mm mm mm mm mmPallet I 800 1200 1825 2700 1100

II 1000 1200 2700 3300 1100

Pallet size Section width FrameWidth Depth 1 pallet 2 pallets depth

Type mm mm mm mm mmPallet I 1200 800 1350 2700 800

II 1200 1000 1350 2700 1100III 1000 850 - 2250 800

• Transvers storage of pallets only with longitudinal supports.

Longitudinal storage of pallets Transvers storage of pallets

• At least two pairs of longitudinal supports must be fitted per rack unit, one above the other.• The distances K between the longitudinal supports must be uniformly spaced.• The specified carrying capacities (with evenly distributed load per unit and compartment) must not be exceeded.


palleT rackingscomponenT parTs

Vertical side frame type 80

Frame members rolled and perforated on front face,hole spacing 50mm for inserting the longitudinal sup-ports. Horizontal and diagonal braces (galvanized) arebolted to the vertical frame members to form a firm,secure frame. Including base plates with holes for the

floor anchors. Safety factor 1.5; as per F.E.M recom-mendation.Specification: 52-3 gauge sheet steel. Colour: sap-phire blue RAL 5003 (KPV).

Depth 800mm

Ref no.Heightmm

75.146 200075.147 250075.148 300075.149 350075.150 4000

Ref no.Heightmm

75.151 450075.152 500075.153 550075.154 600075.155 6500

Depth 1100mm

Ref no.Heightmm

75.156 200075.157 250075.158 300075.159 350075.160 4000

Ref no.Heightmm

75.161 450075.162 500075.163 550075.164 600075.165 6500

Other sizes on request.Attention:If the spacing between the longitudinal supports (top edge to top edge) is greater than 1750mm, diagonalbraces must be used (please enquire).The vertical side frames are supplied non-assembled. Anchor is required!

Floor anchoring

3 floor anchorings per vertical side frame (two on theaccess alley side, one on the rear).Specification: galvanized.

Ref no.75.000 Floor anchor M12 x 110

Shims

Specification: galvanized.

Ref no.Thicknessmm

75.115 175.117 3


Longitudinal supports

Hollow box sectionsThe longitudinal supports have welded-on hangers onboth sides (incl. four safety latches per pair of longitu-dinal supports). Carrying capacity with evenly distrib-uted load per pair of longitudinal supports. Deflectionwith evenly distributed load, max. L / 200. Safety fac-

tor 1.5; as per F.E.M recommendation.Specification: 37-2 sheet steel. Colour: longitudinalsupports red-orange RAL 2001, safety latches galva-nized.

Ref no.For section widthmm

Carrying capacityper pair of long. sup-portskg Type

75.090 1350 2000 2C 815 Per pair75.091 1825 2600 2C 815 Per pair75.096 1825 3600 2C 1015 Per pair75.092 2225 2100 2C 815 Per pair75.097 2225 3000 2C 1015 Per pair75.093 2700 1500 2C 815 Per pair75.098 2700 2600 2C 1015 Per pair75.103 2700 3000 2C 1115 Per pair75.108 2700 3600 2C 1315 Per pair75.099 3300 1800 2C 1015 Per pair75.104 3300 2200 2C 1115 Per pair75.109 3300 3000 2C 1315 Per pair

Z sectionThe longitudinal supports have welded-on hangers onboth sides (incl. four safety latches per pair of longitu-dinal supports). Carrying capacity with evenly distrib-uted load per pair of longitudinal supports. Deflectionwith evenly distributed load, max. L / 200. Safety fac-




75.110 1350 1400 ZS-60-4E Per pair75.111 1825 1100 ZS-60-4E Per pair75.113 2700 745 ZS-60-4E Per pair

Shelf back stopThe shelf back stops can be used on single and doubleshelvings. Comprises 2 brackets and 1 raised edge, in-cluding bolts and nuts.Specification: 37-2 sheet steel, galvanized.

Ref no.Clear section lengthmm

Frame depthmm

Spacing of the double shelv-ingsmm

75.166 1350 1100 20075.015 1825 1100 20075.016 2225 1100 20075.017 2700 1100 20075.018 3300 1100 200Distance from the vertical side frame: 60mm

Horizontal supports

Horizontal supports as supplementary supports. De-flection with evenly distributed load, max. L / 200.Specification: 37-2 sheet steel, galvanized.

For traverse storage of pallets

Ref no. For support TypeFrame depthmm

75.135 Hollow box section 80/2C 80075.136 Hollow box section 110/2C 1100Par paireCarrying capacity per support: 650kg

For wooden shelves

Ref no. For support TypeFrame depthmm

75.138 Z section L-ZS-60 80075.140 Z section L-ZS-60 110075.139 Hollow box section L-2C 1100


Per pieceCarrying capacity per section with 2 horizontal supports and longitudinal supports 1825mm: 750kgCarrying capacity per section with 3 horizontal supports and longitudinal supports 2700mm: 1110kg

Safety latch

Specification: sheet steel St 37-2, galvanized.

Ref no.75.126 Safety latch (spare part)20 pieces

Wooden shelves

For hollow bow section and Z section longitudinal supportsDrop-in wooden shelves. Carrying capacity with even-ly distributed load.Made of three-ply pine, cross-bonded with a naturalsanded finish.

Ref no.Frame depthmm

Section widthmm

Widthmm

Depthmm

Number ofpanels

Carrying capacityper shelvekg

43.492 800 1825 1810 795 2 28843.493 800 2700 2685 795 3 42743.494 1100 1825 1810 1095 2 35043.495 1100 2700 2685 1095 3 510Thickness: 27mmAttention:Use with hollow box sections is permitted only in conjunction with wooden shelf holders.

Wooden shelf holdersFor use only with hollow box section longitudinal sup-ports (not for use with Z section).Specification: galvanized sheet steel.

Ref no.75.125 Wooden shelf holdersAttention:At least 4 wooden shelf holders are required per wooden shelf.

Sheet steel insert panels

For hollow bow sectionsSmooth sheet steel insert panels for fitting on top ofthe hollow box sections type 2C. Carrying capacitywith evenly distributed load.Specification: galvanized sheet steel.


Widthmm

Carryingcapacitykg

75.041 1100 200 18075.168 1100 225 18075.167 1100 250 180


For Z sectionsSmooth sheet steel panels for inserting into Z sectionlongitudinal supports type ZS. Carrying capacity withevenly distributed load.Specification: galvanized sheet steel.


Widthmm

Carryingcapacitykg

75.046 1100 200 8075.047 1100 225 8075.048 1100 300 8075.049 1100 400 80

Spacers

Spacers for double shelves, incl. nuts and bolts (M8 x15, Code 367).Specification: 37-2 sheet steel. Colour: sapphire blueRAL 5003 (KPV).

Ref no.Widthmm

75.005 10075.006 15075.007 20075.008 25075.009 300Number of spacers per vertical side frame-height:< 2000mm: 1 piece per vertical side frame>2000mm < 5000mm: 2 piece per vertical side frame>5000mm < 8000mm: 3 piece per vertical side frame

Wall connector

Wall connector, comprising a wall bracket and spacer,incl. screws for fixing the single shelf unit to a wall.Wall plugs not included.Specification: 37-2 sheet steel. Colour spacer: sap-phire blue RAL 5003, (KPV). Wall bracket galvanized.

Ref no.75.120 Wall connectorAttention:The wall connector must always be inserted together with the spacers.

Column guard

Safety device for exposed vertical side frames. PC 6,including 4 M10 x 110 expansion bolts, drilling depth120mm. Colour: yellow/black, painted. DE 400 C/ANC, incl. 4 M12 x 30 anchor bolts. Colour: red-or-

ange RAL 2001. Front facing film for DE 400 C/ANCmust be ordered separately.Made of 37-2 gauge sheet steel.

Ref no.Widthmm

Depthmm

Heightmm

43.537 PC/6 166 166 32275.002 DE400 C/ANC 243 290 40075.003 Film yellow/black to DE 400 C/ANC

Rear gratings

Rear gratings (safety barrier), welded C-section framewith steel mesh. Mesh size: 50 x 50 x 3mm, incl. brack-ets and fixing materials. Distance from vertical sideframe 150mm.Colour: sapphire blue RAL 5003.

Ref no.Heightmm

Section widthmm

75.025 1000 182575.026 1000 222575.027 1000 270075.028 1000 3300

Ref no.Heightmm

Section widthmm

75.030 1500 182575.031 1500 222575.032 1500 270075.033 1500 3300


Carrying capacity and type plate

With all in formation required to conform with ZH 1 /428.

Ref no.Widthmm

Heightmm Language

75.130 345 750 German


barrel rackingscomponenT parTs

Vertical side frame type 80

Frame members rolled and perforated on front face,hole spacing 50mm for inserting the longitudinal sup-ports. Horizontal and diagonal braces (galvanized) arebolted to the vertical frame members to form a firm,secure frame. Including base plates with holes for the

floor anchors. Safety factor 1.5; as per F.E.M recom-mendation.Specification: 52-3 gauge sheet steel. Colour: sap-phire blue RAL 5003 (KPV).

Depth 800mm

Ref no.Heightmm

75.146 2000Other sizes on request.Attention:If the spacing between the longitudinal supports (top edge to top edge) is greater than 1750mm, diagonalbraces must be used (please enquire).The vertical side frames are supplied non-assembled. Anchor is required!

Floor anchoring

3 floor anchorings per vertical side frame (two on theaccess alley side, one on the rear).Specification: galvanized.

Ref no.75.000 Floor anchor M12 x 110

Shims

Specification: galvanized.

Ref no.Thicknessmm

75.115 175.117 3

Longitudinal supports

Hollow box sectionsThe longitudinal supports have welded-on hangers onboth sides (incl. four safety latches per pair of longitu-dinal supports). Carrying capacity with evenly distrib-uted load per pair of longitudinal supports. Deflectionwith evenly distributed load, max. L / 200. Safety fac-




75.090 1350 2000 2C 815 Per pair75.093 2700 1500 2C 815 Per pair

Safety latch

Specification: sheet steel St 37-2, galvanized.

Ref no.75.126 Safety latch (spare part)


20 pieces

Spacers

Spacers for double shelves, incl. nuts and bolts (M8 x15, Code 367).Specification: 37-2 sheet steel. Colour: sapphire blueRAL 5003 (KPV).

Ref no.Widthmm

75.005 10075.006 15075.007 20075.008 25075.009 300Number of spacers per vertical side frame-height:< 2000mm: 1 piece per vertical side frame>2000mm < 5000mm: 2 piece per vertical side frame>5000mm < 8000mm: 3 piece per vertical side frame

Wall connector

Wall connector, comprising a wall bracket and spacer,incl. screws for fixing the single shelf unit to a wall.Wall plugs not included.Specification: 37-2 sheet steel. Colour spacer: sap-phire blue RAL 5003, (KPV). Wall bracket galvanized.

Ref no.75.120 Wall connectorAttention:The wall connector must always be inserted together with the spacers.

Barrel supports

One-piece barrel supports, suitable for all hollow boxsection longitudinal supports. Safety factor 1.5; as perF.E.M recommendation.Made of sheet steel sections. Colour: red-orange RAL2001.


43.759 800

Canister supports

For hanging from the front longitudinal supports. Can-ister supports ensure safe filling of liquids into contain-ers and also serve as drip holders.Made of sheet steel sections. Colour: red-orange RAL2001.

Ref no.Widthmm

Depthmm

Heightmm

43.760 366 280 450


Drip tray

The drip tray prevents any spilled liquids from spread-ing. With canister supports, an oil collector manifoldand base section. Suitable for transporting by handpallet truck or fork lift truck.Made of sheet steel sections. Colour: sapphire blueRAL 5003.

Ref no.Widthmm

Depthmm

Heightmm

43.758 1200 1200 320Capacity: 310 litresAttention:Not suitable for corrosive substances (acids, alkalines).


Special shelvings are required for long pro-

ducts. Cantilever shelvings for bars, pipes, sec-

tions, etc. Base sections are welded to stable

uprights to produce shelf support frames.

These are bolted together with longitudinal

and diagonal braces to form single or double-

sided shelving units. Each shelf support frame

is equipped with cantilever brackets.


CANTILEVER SHELVINGS

A = Shelving single-sidedB = Shelving double-sidedC = Basic sectionD = Add-on section

A B

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Mobile shelvingIntroduction 130

Bases and railsIntroduction 135

Installing the rail system 136

Trolley dimensions 138

Gauges 141

Anti-tilting 142

Trolleys 143

Rails 171

Bases 173

Accessories 174

Bases and rails for shelf storage walls M10/5Introduction 176

Component parts 178

Dust protection 186

File unit and file storage systems 187

Shelf screw connections 190


Lista mobile shelving provides extensive sto-

rage space within a limited area. The Lista

system requires far less room than conventi-

onal shelving and should extra storage be

required in the future, additional units can

be added on. This system can be used in va-

rious situations e.g. in the office, museums,

hospitals, pharmacy, etc and for different

applications such as archiving, storing wine,

clothes and many more.

– Lista has the right system for every appli-

cation.

MOBILE SHELVING

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



Electric driveThis drive is mainly used in systems with very heavyloads. Single-motor drive is via a friction wheelrunning on the rail. The control system is designed tomeet specific customer requirements.

Aisle locking systemThis aisle locking system protects certain aisles, sothat secured bases can only be moved as a block.

Aisle security systemThis aisle locking system protects certain aisles, sothat secured bases can only be moved as a block.

Central locking systemThe central locking system protects the entire systemagainst unauthorised access.

Manual operationA block of several shelving bases with a maximumoverall weight of 3 tonnes can be moved using themanual system.

Crank driveThe crank drive with a 1:3 reduction ratio permitseasy movement of shelving bases or blocks of baseswith a maximum weight of 20 tonnes. With the 1:6reduction ratio, capacity rises to 30 tonnes. The drivefeatures a chain and cog system.

Dust protectionHorizontal and vertical dust seals protect delicateitems.

Anti-tilting device on the guide railLista‘s anti-tilt device for tall units ensures the stabilityof mobile frames. The ratio between the base (rollerspacing) and the highest shelf must not exceed 1:5.

Label holdersFor clear aisle identification, Lista provides acryliclabel holders with a DIN A5 paper insert.

ATTENTION TO THE FINEST DETAILS


MOBILE SHELVINGTHE RIGHT SYSTEM FOR EVERY APPLICATION

Shelf storage walls M10/5

Shelving systems 06

Drawer storage walls B251/255

Drives

Rails

Lista planning specialists will make sure you get the full benefit from

Lista mobile shelving. They will utilise the system‘s many features,

and match every detail to your specific needs – from the first

drawing through to turnkey installation.


Drawer storage walls B 251 and B 255

There is almost no limit to the use of drawers for storing small parts or tools. Manydrawer sizes and a wide range of dividers form the flexible basis for optimumstorage and protection. For further information see our prospect 05.1 drawerstorage walls or call us for competent advice.

Shelf storage walls M 10/5

Lista shelf storage walls are made of sheet steel and finished in RAL 7035 light grey.External surfaces are painted according to our colour chart. Diagonal braces orrear panels guarantee stability.Depending on dimensions and design, individual shelves can carry between 30kgand 200kg. Maximum load capacity per bay is 500kg.

A = Unit and shelf widths 850mm 1000mm 1255mmB = Shelf depths 300mm 350mm 400mm 500mm 600mmC = Single shelving, fixed 320mm 370mm 420mm 520mm 620mmD = Single shelving, mobile 320mm 370mm 420mm 520mm 620mmE = Double shelving, mobile 630mm 730mm 830mm 1030mm 1230mmF = Shelving heights 2000mm 2200mm 2500 mmG = Base height 150mmH = Base lengthNumber of unit widths A + 75 mm

Shelving system 06

Lista 06 shelving system units are suitable for storing bulky or heavy items. Theiropen design guarantees optimum air circulation. Shelves are finished in RAL 7035light grey. Optional external covers can be painted according to our colour chart.Stability is provided by diagonal braces or rear panels. Depending on dimensions,individual shelf carrying capacity is between 100kg and 400kg. Maximum loadcapacity per shelving unit is 1000kg.

A = Unit widths, axis dimensions 1040mm 1340 mma = Shelf widths 1000mm 1300 mmB = Shelf depths 300mm 400mm 500mm 600mm 800 mmC = Single shelving, fixed 320mm 420mm 520mm 620mm 820 mmD = Single shelving, mobile 320mm 420mm 520mm 620mm 820 mmE = Double shelving, mobile 620mm 820mm 1030mm 1230mm 1630 mmF = Shelving heights 2000mm 2200mm 2500 mmG = Base height 150mmH = Base lengthNumber of unit widths A + 100 mm


MOBILE SHELVINGMOBILE SHELVING – THE BENEFITS

Conventional shelvingFixed units with 30 bays, each providing six metres ofshelf space = 180 linear metres.

Mobile shelvingWith mobile shelving, the same space can house 54shelving units with the same shelf space = 324 linearmetres of shelf space. The gain in space is thus 144linear metres – an improvement of 80%!

Instead of many space-consuming, individual aislesbetween fixed units, with the Lista mobile system asingle aisle will provide access to all shelves. Fixedshelving is only needed for simultaneous access to all

items in store; in all other cases, aisles between eachshelving unit are simply uneconomical. So just pushyour shelves together – it‘s as easy as that!


MOBILE SHELVINGBASES AND RAILS

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



INSTALLING THE RAIL SYSTEMATTENTION TO THE FINEST DETAILS

A special rail system is used for each drive and weight class, and

forms the basis for load capacity. Three different types of rail

installations are available:

Unfinished concrete floorsParticularly suitable for new buildings, the rails in this version are fixed to the unfi-nished concrete floor using levelling iron/setting angle, and are grouted with non-shrink mortar. The final floor covering is laid flush with the rails.

Recessed floorsIf rails are to be installed in an existing floor, 300 mm wide channels are cutaccording to our layout drawing. Rails are then installed as above.

On finished baseThis installation version is suitable for customers who do not wish to take anyfurther measures with the existing base.The rails are laid directly on the floor and levelled using shim material.Caution: Risk of tripping


Mobile shelving without railsThe rolling base with hard rubber rollers can be put directly on the existing floor(tiles, needled felt, concrete, etc.). No cost arises for rail system and base. The mo-bile shelving without rails features running smoothness and synchronised move-ment. The trolleys are guided by a profile plugged to the floor..

INSTALLING THE RAIL SYSTEM

With baseThis version is often chosen for rented premises or in existing buildings. Lista willsupply the chipboard base, either coated with melamine resin, or unfinished foron-site finishing with carpet, etc.


TROLLEY DIMENSIONS FOR SHELF STORAGE WALL M10/5

L

A

B I

F

15215

17

M

GH

C

DE

K

A Shelf depth inside = Shelf depthsB Shelf depth = Actual depthC/F Trolley depth inside = Space for shelf incl. clearanceD/G Trolley depth = Outside dimensionE/H Trolley depth over bumper = Outside dimension incl. gum bumperI Storage lengths = Outside dimension incl. external wallsK Base lenght = Outside dimensionL Unt widths = Shelf widthsM Base height = 150mm (Top edge of rail to shelf)

Trolley depht

Trolley depth with doors Trolley length

Shelf Trolley single shelf Trolley double shelfA B C D E F G Hactual depth over depth overdepht depth inside depth bumper inside depth bumpermm mm mm mm mm mm mm mm250 260 – – – 526 530 555300 310 316 * 320 * 345 * 626 630 655350 360 366 370 395 726 730 755400 410 416 420 445 826 830 855450 460 466 470 495 926 930 955500 510 516 520 545 1026 1030 1055550 560 566 570 595 1126 1130 1155600 610 616 620 645 1226 1230 1255650 660 666 670 695 1326 1330 1355700 710 716 720 745 1426 1430 1455750 760 766 770 795 – – –800 810 816 820 845 – – –

* Only fixed base available

Calculation: Trolley depth D at single shelf = Shelf depth A + 20mmTrolley depth G at double shelf = 2 x Shelf depth A + 30mm

Calculation: With hinged doors = Trolley depth D / G + 30mmWith sliding doors = Trolley depth D / G + 105mm

Unit width L: 850 1000 1255mmCalculation: Shelf length I = Number of units width L + 60mm

Trolley length K = Shelf length I + 15mm


TROLLEY DIMENSIONS FOR SHELVING SYSTEM 06.0 / 06.1

L

A

B I

F

15215

17

M

GH

C

DE

K

A Shelf depth inside = Shelf depthsB Shelf depth = Actual depthC/F Trolley depth inside = Space for shelf incl. clearanceD/G Trolley depth = Outside dimensionE/H Trolley depth over bumper = Outside dimension incl. gum bumperI Storage lengths = Outside dimension incl. external wallsK Base lenght = Outside dimensionL Unt widths = Axis dimensionsM Base height = 150mm (Top edge of rail to shelf)

Trolley depht


Shelf Trolley single shelf Trolley double shelfA B C D E F G Hactual depth over depth overdepht depth inside depth bumper inside depth bumpermm mm mm mm mm mm mm mm300 301 316 * 320 * 345 * 616 620 645400 401 416 420 445 816 820 845500 507 516 520 545 1026 1030 1055600 607 616 620 645 1226 1230 1255800 807 816 820 845 1626 ** 1630 ** 1655 **

* Only fixed base available** Double shelf (2 x single shelf)

Calculation: Trolley depth D at single shelf = Shelf depth A + 20mmTrolley depth G at double shelf (bei 300/400mm) = 2 x Shelf depth A + 30mmTrolley depth G at double shelf (bei 500/600/800mm) = 2 x Shelf depth A + 30mm


Unit widths L: 1040 1340mmFor Shelf widths: 1000 1300mmCalculation: Shelf heigth I = Number of unit widths L + 85mm

Trolley length K = Shelf length I + 15mm


TROLLEY DIMENSIONS FOR DRAWER STORAGE WALLS B251 /B255

L

A

B I

F

15215

17

M

GH

C

DE

K

A Shelf depth inside = Shelf depthsB Shelf depth = Actual depthC/F Trolley depth inside = Space for shelf incl. clearanceD/G Trolley depth = Outside dimensionE/H Trolley depth over bumper = Outside dimension incl. big gum bumperI Storage lengths = Outside dimension incl. external wallsK Base lenght = Outside dimensionL Unt widths = Shelf widthsM Base height = 150mm (Top edge of rail to shelf)

Trolley depth


Shelf Trolley single shelf Trolley double shelfA B C D E F G Hactual depth over depth overdepht depth inside depth bumper inside depth bumpermm mm mm mm mm mm mm mm550 (27E) 553 566 570 620 1116 1120 1170700 (36E) 706 716 720 770 1426 ** 1430 ** 1480 **

** Double shelf (2 x single shelf)

Calculation: Trolley depth D at single shelf = Shelf depth A + 20mmTrolley depth G at double shelf (27E) = 2 x Shelf depth A +20mmTrolley depth G at double shelf (36E) = 2 x Shelf depth A +30mm


Unit widths L: B251 36E = 714mm B255 54E = 1020mm45E = 867mm48E = 918mm54E = 1020mm64E = 1190mm78E = 1428mm

Calculation: Shelf heigth I = Number of unit widths L + 100mmTrolley length K = Shelf length I + 15mm


MOBILE SHELVINGGAUGES

The indicated trolley lengths are length ran-

ges. You should decide on the range in

which your trolley length lies and then look

in the table for the appropriate number of

The max. gauge, i.e. the distance between the two railcentrelines, may not exceed 2500 mm.The amount of protrusion (centreline of outer rail totrolley end) may be max. 540 mm, min. 150 mm.

The max. gauge, i.e. the distance between the two railcentrelines, may not exceed 1200 mm.The amount of protrusion (centreline of outer rail totrolley end) may be max. 300 mm, min. 150 mm.

K N OTrolley length excess lengthin mm Gauges in mmfrom to mm min. max.

Number of Rails: 2800 – 899 400 200 250900 – 999 500 200 2501000 – 1099 600 200 2501100 – 1199 700 200 2501200 – 1299 800 200 2501300 – 1399 900 200 2501400 – 1599 1000 200 3001600 – 1699 1100 250 3001700 – 1799 1200 250 3001800 – 1899 1300 250 3001900 – 2099 1400 250 3502100 – 2199 1500 300 3502200 – 2299 1600 300 3502300 – 2399 1700 300 3502400 – 2599 1800 300 4002600 – 2699 1900 350 4002700 – 2799 2000 350 4002800 – 2899 2100 350 4002900 – 3099 2200 350 4503100 – 3199 2300 400 4503200 – 3299 2400 400 4503300 – 3580 2500 400 540


Number of Rails: 33581 – 3799 1400 390 5003800 – 3999 1500 400 5004000 – 4199 1600 400 5004200 – 4399 1700 400 5004400 – 4599 1800 400 5004600 – 4799 1900 400 5004800 – 4999 2000 400 5005000 – 5199 2100 400 5005200 – 5399 2200 400 5005400 – 5599 2300 400 5005600 – 5799 2400 400 5005800 – 6080 2500 400 500

Number of Rails: 46081 – 6180 1700 490 5406181 – 6480 1800 390 5406481 – 6780 1900 390 5406781 – 7080 2000 390 5407081 – 7380 2100 390 5407381 – 7680 2200 390 5407681 – 7980 2300 390 5407981 – 8280 2400 390 5408281 – 8580 2500 390 540


Number of Rails: 21140 – 1199 700 220 2501200 – 1299 800 200 2501300 – 1399 900 200 2501400 – 1599 1000 200 3001600 – 1699 1100 250 3001700 – 1799 1200 250 300

Number of Rails: 31800 – 1999 700 200 3002000 – 2199 800 200 3002200 – 2399 900 200 3002400 – 2599 1000 200 3002600 – 2799 1100 200 3002800 – 2999 1200 200 300

Number of Rails: 43000 – 3299 900 150 3003300 – 3599 1000 150 3003600 – 3899 1100 150 3003900 – 4199 1200 150 300


Number of Rails: 54200 – 4399 950 200 3004400 – 4599 1000 200 3004600 – 4799 1050 200 3004800 – 4999 1100 200 3005000 – 5199 1150 200 3005200 – 5399 1200 200 300

Number of Rails: 65400 – 5599 1000 200 3005600 – 5799 1050 175 2755800 – 6099 1100 150 3006100 – 6299 1150 175 2756300 – 6599 1200 150 300

Number of Rails: 76600 – 6899 1050 150 3006900 – 7199 1100 150 3007200 – 7499 1150 150 300

Up to 500kg load per unit

From 500kg up to 1000kg load per unit

rails with the mean gauges. The protrusion is

equally distributed on both sides.

N

N

O

O

K

P

PP

P

Q

Q

K


ANTI-TILTING

Lista`s anti-tilt device for tall units ensures

the stability of mobile frames. If an anti-til-

ting device is required, this must be stipula-

ted when ordering the rails. The anti-tilting

D / G R Shelf heigth STrolley Roller- 2000mm 2200mm 2500mm 3000mmdepth spacing Height of top shelf Tmm mm 1950mm 2150mm 2450mm 2950mm370 164 Yes Yes Yes Yes420 214 Yes Yes Yes Yes470 264 Yes Yes Yes Yes520 314 Yes Yes Yes Yes530 324 Yes Yes Yes Yes570 364 Yes Yes Yes Yes620 414 No Yes Yes Yes630 424 No Yes Yes Yes670 464 No No Yes Yes720 514 No No No Yes770 564 No No No Yes820 614 No No No No830 624 No No No No870 664 No No No No930 724 No No No No1030 824 No No No No1120 914 No No No No1130 924 No No No No1230 1024 No No No No1330 1124 No No No No1430 1224 No No No No1630 1424 No No No No

Calculation: Anti-tilting device “yes” if height of top shelf, T/roller spacing, R >= 5.Height of top shelf T = Self heigth S + 150mm - XX = Space Shelf top to height of top shelf TRoller-spacong R = Trolley depth D/G - 2 x 103mm.

The sketch shows a cross-section through the base,when viewed from the front. It shows the guide rollerwith the guide rail. An angle fastened to the trolley en-gages beneath the flange of the guide rail, thus pre-venting the trolley from tilting.Note: The anti-tilting device cannot be retrofitted.

Shelf screw connections must be used in conjunction with anti-tilting devices.

device is built in the rails.

D/G

R

S

T103103

X

150


bases and railsTrolleys

Trolley with crank drive up to 500kg bay load

Trolley complete with crank drive (gear ratio = 1:3) in-cl. crank and rubber buffer. Movement of max. 15 tonstotal weight (several shelves as a unit).Technical details: Max. working load 1050kg per me-tre of trolley length, max. wheel load 1000kg.Max. gauge 2500m, max. protrusion 540mm, min.

protrusion 150mm.Specification:Sheet- steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Wheel diameter90mm. Colour: Black.

Base depth 370mm

Ref no.

Trolley lengthfrom tomm Type of rails

Numberguide rails

Numberrails

66.930 925 - 1499 LF(K)2 266.931 1500 - 1999 LF(K)2 266.932 2000 - 2499 LF(K)2 266.933 2500 - 2999 LF(K)2 266.934 3000 - 3580 LF(K)2 266.935 3581 - 3999 LF(K)3 2 166.936 4000 - 4499 LF(K)3 2 166.937 4500 - 4999 LF(K)3 2 166.938 5000 - 5499 LF(K)3 2 166.939 5500 - 6080 LF(K)3 2 166.940 6081 - 6499 LF(K)4 2 266.941 6500 - 6999 LF(K)4 2 266.942 7000 - 7499 LF(K)4 2 266.943 7500 - 7799 LF(K)4 2 2

Base depth 420mm

Ref no.


Numberguide rails

Numberrails



Base depth 470mm

Ref no.


Numberguide rails

Numberrails


Base depth 520mm

Ref no.


Numberguide rails

Numberrails


Base depth 530mm

Ref no.


Numberguide rails

Numberrails


Base depth 570mm

Ref no.


Numberguide rails

Numberrails



Base depth 620mm

Ref no.


Numberguide rails

Numberrails


Base depth 630mm

Ref no.


Numberguide rails

Numberrails



Base depth 670mm

Ref no.


Numberguide rails

Numberrails


Base depth 720mm

Ref no.


Numberguide rails

Numberrails


Base depth 730mm

Ref no.


Numberguide rails

Numberrails


Base depth 770mm

Ref no.


Numberguide rails

Numberrails



Base depth 820mm

Ref no.


Numberguide rails

Numberrails


Base depth 830mm

Ref no.


Numberguide rails

Numberrails



Base depth 930mm

Ref no.


Numberguide rails

Numberrails


Base depth 1030mm

Ref no.


Numberguide rails

Numberrails


Base depth 1130mm

Ref no.


Numberguide rails

Numberrails


Base depth 1230mm

Ref no.


Numberguide rails

Numberrails



Base depth 1330mm

Ref no.


Numberguide rails

Numberrails


Base depth 1430mm

Ref no.


Numberguide rails

Numberrails

66.271 925 - 1499 LF(K)2 266.272 1500 - 1999 LF(K)2 266.273 2000 - 2499 LF(K)2 266.274 2500 - 2999 LF(K)2 266.275 3000 - 3580 LF(K)2 266.276 3581 - 3999 LF(K)3 2 166.277 4000 - 4499 LF(K)3 2 166.278 4500 - 4999 LF(K)3 2 166.279 5000 - 5499 LF(K)3 2 166.280 5500 - 6080 LF(K)3 2 166.281 6081 - 6499 LF(K)4 2 266.282 6500 - 6999 LF(K)4 2 266.283 7000 - 7499 LF(K)4 2 266.284 7500 - 7799 LF(K)4 2 2LF = slide and guide rail without anti-tilting deviceLFK = slide and guide rail with anti-tilting device.Other dimensions on request.

Anti-tilting device

Ref no.66.913 Set for 1 trolleyNote: For trolley depth 370mm the crank(Ø 450mm)overhangs 40mm to both sides.


Trolley with crank drive up to 1000kg bay load

Trolley complete with crank drive (gear ratio = 1:3) in-cl. crank and rubber buffer. (If a B251/255 drawer stor-age wall is installed, large rubber buffers must beused, see accessories.) Movement of max. 15 tons to-tal weight (several shelves as a unit).Technical details: Max. working load 2000kg per me-tre of trolley length, max. wheel load 1000kg. Max.

gauge 1200mm, max. protrusion 300mm, min. protru-sion 150mm.Specification: Sheet- steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Wheel diameter90mm. Colour: Black.

Base depth 370mm

Ref no.


Numberguide rails

Numberrails

66.944 1000 - 1399 LF(K)2 266.945 1400 - 1799 LF(K)2 266.946 1800 - 2499 LF(K)3 2 166.947 2500 - 2999 LF(K)3 2 166.948 3000 - 3499 LF(K)4 2 266.949 3500 - 4199 LF(K)4 2 266.950 4200 - 4499 LF(K)5 2 366.951 4500 - 4999 LF(K)5 2 366.952 5000 - 5399 LF(K)5 2 366.953 5400 - 5999 LF(K)6 2 466.954 6000 - 6599 LF(K)6 2 466.955 6600 - 6999 LF(K)7 2 566.956 7000 - 7499 LF(K)7 2 566.957 7500 - 7799 LF(K)7 2 5

Base depth 420mm

Ref no.


Numberguide rails

Numberrails


Base depth 520mm

Ref no.


Numberguide rails

Numberrails


Base depth 570mm

Ref no.


Numberguide rails

Numberrails



Base depth 620mm

Ref no.


Numberguide rails

Numberrails


Base depth 720mm

Ref no.


Numberguide rails

Numberrails



Base depth 820mm

Ref no.


Numberguide rails

Numberrails


Base depth 1030mm

Ref no.


Numberguide rails

Numberrails


Base depth 1120mm

Ref no.


Numberguide rails

Numberrails


Base depth 1230mm

Ref no.


Numberguide rails

Numberrails



Base depth 1430mm*

Ref no.


Numberguide rails

Numberrails

66.412 1000 - 1399 LF(K)2 266.413 1400 - 1799 LF(K)2 266.414 1800 - 2499 LF(K)3 2 166.415 2500 - 2999 LF(K)3 2 166.416 3000 - 3499 LF(K)4 2 266.417 3500 - 4199 LF(K)4 2 266.418 4200 - 4499 LF(K)5 2 366.419 4500 - 4999 LF(K)5 2 366.420 5000 - 5399 LF(K)5 2 366.421 5400 - 5999 LF(K)6 2 466.422 6000 - 6599 LF(K)6 2 466.423 6600 - 6999 LF(K)7 2 566.424 7000 - 7499 LF(K)7 2 566.425 7500 - 7799 LF(K)7 2 5* Double base

LF = slide and guide rail without anti-tilting deviceLFK = slide and guide rail with anti-tilting deviceOther dimensions on request.

Trolley with hand-push drive up to 500kg bay load

Trolley complete with hand-push drive. Movement ofmax. 3 tons total weight (several shelves as a unit).Technical details: Max. working load 1050kg per me-tre of trolley length, max. wheel load 1000kg.Max. gauge 2500mm, max. protrusion 540mm, min.

protrusion 150mm.Specification: Sheet- steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Wheel diameter90mm. Colour: Black.

Base depth 370mm

Ref no.


Numberguide rails

Numberrails

66.922 925 - 1499 LF(K)2 1 166.923 1500 - 1999 LF(K)2 1 166.924 2000 - 2499 LF(K)2 1 166.925 2500 - 2999 LF(K)2 1 166.926 3000 - 3580 LF(K)2 1 166.927 3581 - 3999 LF(K)3 1 266.928 4000 - 4499 LF(K)3 1 266.929 4500 - 4999 LF(K)3 1 2


Base depth 420mm

Ref no.


Numberguide rails

Numberrails


Base depth 470mm

Ref no.


Numberguide rails

Numberrails


Base depth 520mm

Ref no.


Numberguide rails

Numberrails


Base depth 530mm

Ref no.


Numberguide rails

Numberrails


Base depth 570mm

Ref no.


Numberguide rails

Numberrails


Base depth 620mm

Ref no.


Numberguide rails

Numberrails



Base depth 630mm

Ref no.


Numberguide rails

Numberrails


Base depth 670mm

Ref no.


Numberguide rails

Numberrails


Base depth 720mm

Ref no.


Numberguide rails

Numberrails


Base depth 730mm

Ref no.


Numberguide rails

Numberrails



Base depth 770mm

Ref no.


Numberguide rails

Numberrails


Base depth 820mm

Ref no.


Numberguide rails

Numberrails


Base depth 830mm

Ref no.


Numberguide rails

Numberrails


Base depth 930mm

Ref no.


Numberguide rails

Numberrails


Base depth 1030mm

Ref no.


Numberguide rails

Numberrails


Base depth 1130mm

Ref no.


Numberguide rails

Numberrails



Base depth 1230mm

Ref no.


Numberguide rails

Numberrails


Base depth 1330mm

Ref no.


Numberguide rails

Numberrails


Base depth 1430mm

Ref no.


Numberguide rails

Numberrails

66.864 925 - 1499 LF(K)2 1 166.865 1500 - 1999 LF(K)2 1 166.866 2000 - 2499 LF(K)2 1 166.867 2500 - 2999 LF(K)2 1 166.868 3000 - 3580 LF(K)2 1 166.869 3581 - 3999 LF(K)3 1 266.870 4000 - 4499 LF(K)3 1 266.871 4500 - 4999 LF(K)3 1 2LF = slide and guide rail without anti-tilting deviceLFK = slide and guide rail with anti-tilting deviceOther dimensions on request.


Fixed base up to 500 / 1000kg bay load

Complete trolley incl. fixing material and rubber buff-ers. (If a B251/255 drawer storage wall is installed,large rubber buffers must be used, see accessories.)Technical details: Max. working load 2000kg per me-

tre of trolley length.Specification: Sheet-steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Colour: Black.

Base depth 320mm

Ref no.

Trolley lengthfrom tomm

66.426 925 - 149966.427 1500 - 199966.428 2000 - 249966.429 2500 - 299966.430 3000 - 349966.431 3500 - 399966.432 4000 - 4499

Ref no.

Trolley lengthfrom to

mm66.433 4500 - 499966.434 5000 - 549966.435 5500 - 599966.436 6000 - 649966.437 6500 - 699966.438 7000 - 749966.439 7500 - 7799

Base depth 370mm

Ref no.


66.440 925 - 149966.441 1500 - 199966.442 2000 - 249966.443 2500 - 299966.444 3000 - 349966.445 3500 - 399966.446 4000 - 4499

Ref no.


mm66.447 4500 - 499966.448 5000 - 549966.449 5500 - 599966.450 6000 - 649966.451 6500 - 699966.452 7000 - 749966.453 7500 - 7799

Base depth 420mm

Ref no.


66.454 925 - 149966.455 1500 - 199966.456 2000 - 249966.457 2500 - 299966.458 3000 - 349966.459 3500 - 399966.460 4000 - 4499

Ref no.


mm66.461 4500 - 499966.462 5000 - 549966.463 5500 - 599966.464 6000 - 649966.465 6500 - 699966.466 7000 - 749966.467 7500 - 7799

Base depth 470mm

Ref no.


66.468 925 - 149966.469 1500 - 199966.470 2000 - 249966.471 2500 - 299966.472 3000 - 349966.473 3500 - 399966.474 4000 - 4499

Ref no.


mm66.475 4500 - 499966.476 5000 - 549966.477 5500 - 599966.478 6000 - 649966.479 6500 - 699966.480 7000 - 749966.481 7500 - 7799

Base depth 520mm

Ref no.


66.482 925 - 149966.483 1500 - 199966.484 2000 - 249966.485 2500 - 299966.486 3000 - 349966.487 3500 - 399966.488 4000 - 4499

Ref no.


mm66.489 4500 - 499966.490 5000 - 549966.491 5500 - 599966.492 6000 - 649966.493 6500 - 699966.494 7000 - 749966.495 7500 - 7799


Base depth 530mm

Ref no.


66.496 925 - 149966.497 1500 - 199966.498 2000 - 249966.499 2500 - 299966.500 3000 - 349966.501 3500 - 399966.502 4000 - 4499

Ref no.


mm66.503 4500 - 499966.504 5000 - 549966.505 5500 - 599966.506 6000 - 649966.507 6500 - 699966.508 7000 - 749966.509 7500 - 7799

Base depth 570mm

Ref no.


66.510 925 - 149966.511 1500 - 199966.512 2000 - 249966.513 2500 - 299966.514 3000 - 349966.515 3500 - 399966.516 4000 - 4499

Ref no.


mm66.517 4500 - 499966.518 5000 - 549966.519 5500 - 599966.520 6000 - 649966.521 6500 - 699966.522 7000 - 749966.523 7500 - 7799

Base depth 620mm

Ref no.


66.524 925 - 149966.525 1500 - 199966.526 2000 - 249966.527 2500 - 299966.528 3000 - 349966.529 3500 - 399966.530 4000 - 4499

Ref no.


mm66.531 4500 - 499966.532 5000 - 549966.533 5500 - 599966.534 6000 - 649966.535 6500 - 699966.536 7000 - 749966.537 7500 - 7799

Base depth 630mm

Ref no.


66.538 925 - 149966.539 1500 - 199966.540 2000 - 249966.541 2500 - 299966.542 3000 - 349966.543 3500 - 399966.544 4000 - 4499

Ref no.


mm66.545 4500 - 499966.546 5000 - 549966.547 5500 - 599966.548 6000 - 649966.549 6500 - 699966.550 7000 - 749966.551 7500 - 7799


Base depth 670mm

Ref no.


66.552 925 - 149966.553 1500 - 199966.554 2000 - 249966.555 2500 - 299966.556 3000 - 349966.557 3500 - 399966.558 4000 - 4499

Ref no.


mm66.559 4500 - 499966.560 5000 - 549966.561 5500 - 599966.562 6000 - 649966.563 6500 - 699966.564 7000 - 749966.565 7500 - 7799

Base depth 720mm

Ref no.


66.566 925 - 149966.567 1500 - 199966.568 2000 - 249966.569 2500 - 299966.570 3000 - 349966.571 3500 - 399966.572 4000 - 4499

Ref no.


mm66.573 4500 - 499966.574 5000 - 549966.575 5500 - 599966.576 6000 - 649966.577 6500 - 699966.578 7000 - 749966.579 7500 - 7799

Base depth 730mm

Ref no.


66.580 925 - 149966.581 1500 - 199966.582 2000 - 249966.583 2500 - 299966.584 3000 - 349966.585 3500 - 399966.586 4000 - 4499

Ref no.


mm66.587 4500 - 499966.588 5000 - 549966.589 5500 - 599966.590 6000 - 649966.591 6500 - 699966.592 7000 - 749966.593 7500 - 7799

Base depth 770mm

Ref no.


66.594 925 - 149966.595 1500 - 199966.596 2000 - 249966.597 2500 - 299966.598 3000 - 349966.599 3500 - 399966.600 4000 - 4499

Ref no.


mm66.601 4500 - 499966.602 5000 - 549966.603 5500 - 599966.604 6000 - 649966.605 6500 - 699966.606 7000 - 749966.607 7500 - 7799

Base depth 820mm

Ref no.


66.608 925 - 149966.609 1500 - 199966.610 2000 - 249966.611 2500 - 299966.612 3000 - 349966.613 3500 - 399966.614 4000 - 4499

Ref no.


mm66.615 4500 - 499966.616 5000 - 549966.617 5500 - 599966.618 6000 - 649966.619 6500 - 699966.620 7000 - 749966.621 7500 - 7799

Base depth 830mm

Ref no.


66.622 925 - 149966.623 1500 - 199966.624 2000 - 249966.625 2500 - 299966.626 3000 - 349966.627 3500 - 399966.628 4000 - 4499

Ref no.


mm66.629 4500 - 499966.630 5000 - 549966.631 5500 - 599966.632 6000 - 649966.633 6500 - 699966.634 7000 - 749966.635 7500 - 7799


Base depth 930mm

Ref no.


66.636 925 - 149966.637 1500 - 199966.638 2000 - 249966.639 2500 - 299966.640 3000 - 349966.641 3500 - 399966.642 4000 - 4499

Ref no.


mm66.643 4500 - 499966.644 5000 - 549966.645 5500 - 599966.646 6000 - 649966.647 6500 - 699966.648 7000 - 749966.649 7500 - 7799

Base depth 1030mm

Ref no.


66.650 925 - 149966.651 1500 - 199966.652 2000 - 249966.653 2500 - 299966.654 3000 - 349966.655 3500 - 399966.656 4000 - 4499

Ref no.


mm66.657 4500 - 499966.658 5000 - 549966.659 5500 - 599966.660 6000 - 649966.661 6500 - 699966.662 7000 - 749966.663 7500 - 7799

Base depth 1130mm

Ref no.


66.664 925 - 149966.665 1500 - 199966.666 2000 - 249966.667 2500 - 299966.668 3000 - 349966.669 3500 - 399966.670 4000 - 4499

Ref no.


mm66.671 4500 - 499966.672 5000 - 549966.673 5500 - 599966.674 6000 - 649966.675 6500 - 699966.676 7000 - 749966.677 7500 - 7799

Base depth 1230mm

Ref no.


66.678 925 - 149966.679 1500 - 199966.680 2000 - 249966.681 2500 - 299966.682 3000 - 349966.683 3500 - 399966.684 4000 - 4499

Ref no.


mm66.685 4500 - 499966.686 5000 - 549966.687 5500 - 599966.688 6000 - 649966.689 6500 - 699966.690 7000 - 749966.691 7500 - 7799


Base depth 1330mm

Ref no.


66.692 925 - 149966.693 1500 - 199966.694 2000 - 249966.695 2500 - 299966.696 3000 - 349966.697 3500 - 399966.698 4000 - 4499

Ref no.


mm66.699 4500 - 499966.700 5000 - 549966.701 5500 - 599966.702 6000 - 649966.703 6500 - 699966.704 7000 - 749966.705 7500 - 7799

Base depth 1430mm

Ref no.


66.706 925 - 149966.707 1500 - 199966.708 2000 - 249966.709 2500 - 299966.710 3000 - 349966.711 3500 - 399966.712 4000 - 4499

Ref no.


mm66.713 4500 - 499966.714 5000 - 549966.715 5500 - 599966.716 6000 - 649966.717 6500 - 699966.718 7000 - 749966.719 7500 - 7799

Other dimensions on request.

Trolley with crank drive without rails up to 250kg bay load

Trolley complete with with crank drive (gear ratio =1:3) incl. crank and rubber buffer. Technical details:Max. working load 3000kg per trolley, max. wheelload 500kg.Max. gauge 2500mm, max. protrusion 540mm, min.protrusion 150mm.

Specification: Sheet-steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Wheel body of steeltubing with Extrahane contact surface. Wheel diame-ter 100mm. Colour: Black RAL 9011.

Base depth 520mm

Ref no.Trolley lengthmm Number of tracks Trolley division

67.000 925 - 1499 2 167.001 1500 - 1999 2 167.002 2000 - 2499 2 167.003 2500 - 2999 2 167.004 3000 - 3580 2 167.005 3581 - 3999 3 267.006 4000 - 4499 3 267.007 4500 - 4999 3 267.008 5000 - 5499 3 267.009 5500 - 6080 3 2

Base depth 530mm


67.010 925 - 1499 2 167.011 1500 - 1999 2 167.012 2000 - 2499 2 167.013 2500 - 2999 2 167.014 3000 - 3580 2 167.015 3581 - 3999 3 267.016 4000 - 4499 3 267.017 4500 - 4999 3 267.018 5000 - 5499 3 267.019 5500 - 6080 3 2

Base depth 570mm


67.020 925 - 1499 2 167.021 1500 - 1999 2 167.022 2000 - 2499 2 167.023 2500 - 2999 2 167.024 3000 - 3580 2 167.025 3581 - 3999 3 267.026 4000 - 4499 3 267.027 4500 - 4999 3 267.028 5000 - 5499 3 267.029 5500 - 6080 3 2


Base depth 620mm


67.030 925 - 1499 2 167.031 1500 - 1999 2 167.032 2000 - 2499 2 167.033 2500 - 2999 2 167.034 3000 - 3580 2 167.035 3581 - 3999 3 267.036 4000 - 4499 3 267.037 4500 - 4999 3 267.038 5000 - 5499 3 267.039 5500 - 6080 3 2

Base depth 630mm


67.040 925 - 1499 2 167.041 1500 - 1999 2 167.042 2000 - 2499 2 167.043 2500 - 2999 2 167.044 3000 - 3580 2 167.045 3581 - 3999 3 267.046 4000 - 4499 3 267.047 4500 - 4999 3 267.048 5000 - 5499 3 267.049 5500 - 6080 3 2

Base depth 670mm


67.050 925 - 1499 2 167.051 1500 - 1999 2 167.052 2000 - 2499 2 167.053 2500 - 2999 2 167.054 3000 - 3580 2 167.055 3581 - 3999 3 267.056 4000 - 4499 3 267.057 4500 - 4999 3 267.058 5000 - 5499 3 267.059 5500 - 6080 3 2


Base depth 720mm


67.060 925 - 1499 2 167.061 1500 - 1999 2 167.062 2000 - 2499 2 167.063 2500 - 2999 2 167.064 3000 - 3580 2 167.065 3581 - 3999 3 267.066 4000 - 4499 3 267.067 4500 - 4999 3 267.068 5000 - 5499 3 267.069 5500 - 6080 3 2

Base depth 730mm


67.070 925 - 1499 2 167.071 1500 - 1999 2 167.072 2000 - 2499 2 167.073 2500 - 2999 2 167.074 3000 - 3580 2 167.075 3581 - 3999 3 267.076 4000 - 4499 3 267.077 4500 - 4999 3 267.078 5000 - 5499 3 267.079 5500 - 6080 3 2

Base depth 770mm


67.080 925 - 1499 2 167.081 1500 - 1999 2 167.082 2000 - 2499 2 167.083 2500 - 2999 2 167.084 3000 - 3580 2 167.085 3581 - 3999 3 267.086 4000 - 4499 3 267.087 4500 - 4999 3 267.088 5000 - 5499 3 267.089 5500 - 6080 3 2

Base depth 820mm


67.090 925 - 1499 2 167.091 1500 - 1999 2 167.092 2000 - 2499 2 167.093 2500 - 2999 2 167.094 3000 - 3580 2 167.095 3581 - 3999 3 267.096 4000 - 4499 3 267.097 4500 - 4999 3 267.098 5000 - 5499 3 267.099 5500 - 6080 3 2

Base depth 830mm


67.100 925 - 1499 2 167.101 1500 - 1999 2 167.102 2000 - 2499 2 167.103 2500 - 2999 2 167.104 3000 - 3580 2 167.105 3581 - 3999 3 267.106 4000 - 4499 3 267.107 4500 - 4999 3 267.108 5000 - 5499 3 267.109 5500 - 6080 3 2


Base depth 930mm


67.110 925 - 1499 2 167.111 1500 - 1999 2 167.112 2000 - 2499 2 167.113 2500 - 2999 2 167.114 3000 - 3580 2 167.115 3581 - 3999 3 267.116 4000 - 4499 3 267.117 4500 - 4999 3 267.118 5000 - 5499 3 267.119 5500 - 6080 3 2

Base depth 1030mm


67.120 925 - 1499 2 167.121 1500 - 1999 2 167.122 2000 - 2499 2 167.123 2500 - 2999 2 167.124 3000 - 3580 2 167.125 3581 - 3999 3 267.126 4000 - 4499 3 267.127 4500 - 4999 3 267.128 5000 - 5499 3 267.129 5500 - 6080 3 2

Base depth 1130mm


67.130 925 - 1499 2 167.131 1500 - 1999 2 167.132 2000 - 2499 2 167.133 2500 - 2999 2 167.134 3000 - 3580 2 167.135 3581 - 3999 3 267.136 4000 - 4499 3 267.137 4500 - 4999 3 267.138 5000 - 5499 3 267.139 5500 - 6080 3 2


Base depth 1230mm


67.140 925 - 1499 2 167.141 1500 - 1999 2 167.142 2000 - 2499 2 167.143 2500 - 2999 2 167.144 3000 - 3580 2 167.145 3581 - 3999 3 267.146 4000 - 4499 3 267.147 4500 - 4999 3 267.148 5000 - 5499 3 267.149 5500 - 6080 3 2

Base depth 1330mm


67.150 925 - 1499 2 167.151 1500 - 1999 2 167.152 2000 - 2499 2 167.153 2500 - 2999 2 167.154 3000 - 3580 2 167.155 3581 - 3999 3 267.156 4000 - 4499 3 267.157 4500 - 4999 3 267.158 5000 - 5499 3 267.159 5500 - 6080 3 2

Base depth 1430mm


67.160 925 - 1499 2 167.161 1500 - 1999 2 167.162 2000 - 2499 2 167.163 2500 - 2999 2 167.164 3000 - 3580 2 167.165 3581 - 3999 3 267.166 4000 - 4499 3 267.167 4500 - 4999 3 267.168 5000 - 5499 3 267.169 5500 - 6080 3 2Other dimensions on request.

Trolley with crank drive without rails up to 500kg bay load

Trolley complete with with crank drive (gear ratio =1:6) incl. crank and rubber buffer. Technical details:Max. working load 6000kg per trolley, max. wheelload 500kg.Max. gauge 2500mm, max. protrusion 540mm, min.protrusion 150mm.

Specification: Sheet-steel, transverse members weld-ed to longitudinal supports. Wheel cross membersbolted to longitudinal supports. Wheel body of steeltubing with Extrahane contact surface. Wheel diame-ter 100mm. Colour: Black RAL 9011.

Base depth 520mm


67.170 925 - 1499 2 167.171 1500 - 1999 2 167.172 2000 - 2499 2 167.173 2500 - 2999 2 167.174 3000 - 3580 2 167.175 3581 - 3999 3 267.176 4000 - 4499 3 267.177 4500 - 4999 3 267.178 5000 - 5499 3 267.179 5500 - 6080 3 2

Base depth 530mm


67.180 925 - 1499 2 167.181 1500 - 1999 2 167.182 2000 - 2499 2 167.183 2500 - 2999 2 167.184 3000 - 3580 2 167.185 3581 - 3999 3 267.186 4000 - 4499 3 267.187 4500 - 4999 3 267.188 5000 - 5499 3 267.189 5500 - 6080 3 2


Base depth 570mm


67.190 925 - 1499 2 167.191 1500 - 1999 2 167.192 2000 - 2499 2 167.193 2500 - 2999 2 167.194 3000 - 3580 2 167.195 3581 - 3999 3 267.196 4000 - 4499 3 267.197 4500 - 4999 3 267.198 5000 - 5499 3 267.199 5500 - 6080 3 2

Base depth 620mm


67.200 925 - 1499 2 167.201 1500 - 1999 2 167.202 2000 - 2499 2 167.203 2500 - 2999 2 167.204 3000 - 3580 2 167.205 3581 - 3999 3 267.206 4000 - 4499 3 267.207 4500 - 4999 3 267.208 5000 - 5499 3 267.209 5500 - 6080 3 2

Base depth 630mm


67.210 925 - 1499 2 167.211 1500 - 1999 2 167.212 2000 - 2499 2 167.213 2500 - 2999 2 167.214 3000 - 3580 2 167.215 3581 - 3999 3 267.216 4000 - 4499 3 267.217 4500 - 4999 3 267.218 5000 - 5499 3 267.219 5500 - 6080 3 2


Base depth 670mm


67.220 925 - 1499 2 167.221 1500 - 1999 2 167.222 2000 - 2499 2 167.223 2500 - 2999 2 167.224 3000 - 3580 2 167.225 3581 - 3999 3 267.226 4000 - 4499 3 267.227 4500 - 4999 3 267.228 5000 - 5499 3 267.229 5500 - 6080 3 2

Base depth 720mm


67.230 925 - 1499 2 167.231 1500 - 1999 2 167.232 2000 - 2499 2 167.233 2500 - 2999 2 167.234 3000 - 3580 2 167.235 3581 - 3999 3 267.236 4000 - 4499 3 267.237 4500 - 4999 3 267.238 5000 - 5499 3 267.239 5500 - 6080 3 2

Base depth 730mm


67.240 925 - 1499 2 167.241 1500 - 1999 2 167.242 2000 - 2499 2 167.243 2500 - 2999 2 167.244 3000 - 3580 2 167.245 3581 - 3999 3 267.246 4000 - 4499 3 267.247 4500 - 4999 3 267.248 5000 - 5499 3 267.249 5500 - 6080 3 2

Base depth 770mm


67.250 925 - 1499 2 167.251 1500 - 1999 2 167.252 2000 - 2499 2 167.253 2500 - 2999 2 167.254 3000 - 3580 2 167.255 3581 - 3999 3 267.256 4000 - 4499 3 267.257 4500 - 4999 3 267.258 5000 - 5499 3 267.259 5500 - 6080 3 2

Base depth 820mm


67.260 925 - 1499 2 167.261 1500 - 1999 2 167.262 2000 - 2499 2 167.263 2500 - 2999 2 167.264 3000 - 3580 2 167.265 3581 - 3999 3 267.266 4000 - 4499 3 267.267 4500 - 4999 3 267.268 5000 - 5499 3 267.269 5500 - 6080 3 2


Base depth 830mm


67.270 925 - 1499 2 167.271 1500 - 1999 2 167.272 2000 - 2499 2 167.273 2500 - 2999 2 167.274 3000 - 3580 2 167.275 3581 - 3999 3 267.276 4000 - 4499 3 267.277 4500 - 4999 3 267.278 5000 - 5499 3 267.279 5500 - 6080 3 2

Base depth 930mm


67.280 925 - 1499 2 167.281 1500 - 1999 2 167.282 2000 - 2499 2 167.283 2500 - 2999 2 167.284 3000 - 3580 2 167.285 3581 - 3999 3 267.286 4000 - 4499 3 267.287 4500 - 4999 3 267.288 5000 - 5499 3 267.289 5500 - 6080 3 2

Base depth 1030mm


67.290 925 - 1499 2 167.291 1500 - 1999 2 167.292 2000 - 2499 2 167.293 2500 - 2999 2 167.294 3000 - 3580 2 167.295 3581 - 3999 3 267.296 4000 - 4499 3 267.297 4500 - 4999 3 267.298 5000 - 5499 3 267.299 5500 - 6080 3 2


Base depth 1130mm


67.300 925 - 1499 2 167.301 1500 - 1999 2 167.302 2000 - 2499 2 167.303 2500 - 2999 2 167.304 3000 - 3580 2 167.305 3581 - 3999 3 267.306 4000 - 4499 3 267.307 4500 - 4999 3 267.308 5000 - 5499 3 267.309 5500 - 6080 3 2

Base depth 1230mm


67.310 925 - 1499 2 167.311 1500 - 1999 2 167.312 2000 - 2499 2 167.313 2500 - 2999 2 167.314 3000 - 3580 2 167.315 3581 - 3999 3 267.316 4000 - 4499 3 267.317 4500 - 4999 3 267.318 5000 - 5499 3 267.319 5500 - 6080 3 2

Base depth 1330mm


67.320 925 - 1499 2 167.321 1500 - 1999 2 167.322 2000 - 2499 2 167.323 2500 - 2999 2 167.324 3000 - 3580 2 167.325 3581 - 3999 3 267.326 4000 - 4499 3 267.327 4500 - 4999 3 267.328 5000 - 5499 3 267.329 5500 - 6080 3 2

Base depth 1430mm


67.330 925 - 1499 2 167.331 1500 - 1999 2 167.332 2000 - 2499 2 167.333 2500 - 2999 2 167.334 3000 - 3580 2 167.335 3581 - 3999 3 267.336 4000 - 4499 3 267.337 4500 - 4999 3 267.338 5000 - 5499 3 267.339 5500 - 6080 3 2Other dimensions on request.

Guide profiles

Ref no.67.340 Guide profiles per lm

End stop mounted

Ref no.67.341 End stop mounted per piece


rails

Rail of galvanized St 52-3K, rail plate of galvanized St37. Max. rail length in one run 3m. Rails installed asper information sheet. Installation on / in floor (withsetting angle): Rails with holes (spacing 329mm), fix-ing consisting of setting angle (20 x 10 x 200mm) incl.

Phillips screws (M6 x 50mm) and plastic anchors (8 x40mm).Installation on / in floor (with levelling iron): Railswithout holes, fixing (spacing approx. 600 mm) con-sisting of levelling iron (200 x 300mm) incl. threaded

rods (M10 x 100 mm) and metal anchor (M10).Specification for base: Rails with holes (spacing329mm), fixing consisting of galvanized flat-headedPhillips chipboard screws (6 x 40mm).

For crank drive

Rails incl. floor chain with fixtures

Without anti-tilting device, with setting angle on or in floor

Ref no. Type of railsNumberguide rails

Numberrails

66.958 LF2 266.959 LF3 2 166.960 LF4 2 266.961 LF5 2 366.962 LF6 2 466.963 LF7 2 5

Without anti-tilting device, with levelling iron on or in floor


Numberrails

66.872 LF2 266.873 LF3 2 166.874 LF4 2 266.875 LF5 2 366.876 LF6 2 466.877 LF7 2 5

Without anti-tilting device, for base


Numberrails

66.878 LF2 266.879 LF3 2 166.880 LF4 2 266.881 LF5 2 366.882 LF6 2 466.883 LF7 2 5

With anti-tilting device, for base


Numberrails

66.964 LFK2 266.965 LFK3 2 166.966 LFK4 2 266.967 LFK5 2 366.968 LFK6 2 466.969 LFK7 2 5



Numberrails

66.884 LFK2 266.885 LFK3 2 166.886 LFK4 2 266.887 LFK5 2 366.888 LFK6 2 466.889 LFK7 2 5




Numberrails

66.890 LFK2 266.891 LFK3 2 166.892 LFK4 2 266.893 LFK5 2 366.894 LFK6 2 466.895 LFK7 2 5LF = slide and guide rail without anti-tilting deviceLFK = slide and guide rail with anti-tilting device

For hand-push drive



Numberrails

66.970 LF 1 166.971 LF 1 266.972 LF 1 3



Numberrails

66.896 LF 1 166.897 LF 1 266.898 LF 1 3



Numberrails

66.899 LF 1 166.900 LF 1 266.901 LF 1 3



Numberrails

66.973 LFK2 1 166.974 LFK3 1 266.975 LFK4 1 3



Numberrails

66.902 LFK2 1 166.903 LFK3 1 266.904 LFK4 1 3



Numberrails

66.905 LFK2 1 166.906 LFK3 1 266.907 LFK4 1 3LF = slide and guide rail without anti-tilting deviceLFK = slide and guide rail with anti-tilting


base

Specification in base

The rails are bolted in the base rail channels. Novopanchipboard F5V20 (25mm + 19mm bolted).If the construction includes a coating or coverings, thetop chipboard is offset by the thickness of the cover-ing. Shim material included.

Ref no. SpecificationTotal heightmm

66.908 unfinished 4466.909 coated grey, non-slip; total height 4466.910 unfinished if coating/covering added construction 44Other versions on request.

Base edge

Ref no. PictureHeightmm

Thicknessmm

66.911 1 44 10 per lm66.912 1 44 10 per lm66.976 2 80 / 18 1,5 per lm

Run-up ramp

This compensate the difference in levels of floor andbase. It is used when a trolley operates in the accessaisle.Specification: Sendzimir galvanized St 03 sheet steelincl. fixing material. Max. length in one piece 3m.

Ref no.Heightmm

Depthmm

Thicknessmm

66.914 44 250 3 per lm


accessories

Complete retrofitting crank box with central lock on request.

Central lock

Closes off the entire installation.Specification: With Kaba 8 lock, diverse locking.

Ref no.66.915 For crank drive (gear ratio = 1:3 only)66.916 For hand-push drive

Aisle lock

Closes off individual access aisles.Specification: With Kaba 8 lock, diverse locking.

Ref no.66.917 Aisle lock (applicable from trolley depth 620mm)

Aisle safeguard

To secure individual aisles by locking the respectivecrank.

Ref no.66.918 Aisle safeguard

End stop

Serves as the stop for the outermost trolley.

Ref no. Specification Picture Number66.978 Used in rails with crank

drive1 1

66.980 Used in rails with hand-push drive

1 1

66.920 plunged into the base 2 1

Crank drive 1:6

Movement of max. 30 tons total weight(severalshelves as a unit).

Ref no.66.921 Crank drive 1:6Extra price per trolley


Large rubber buffer

When a B251/255 drawer storage wall is installed,large rubber buffers must be used (4 pieces per trolley,2 pieces per fixed base).Specification: Black NR elastomer incl. a galvanizedsteel connector and fixing material (M12).

Ref no.Lengthmm

Diametermm

66.977 60 80Extra price per piece


SHELF STORAGE WALLS M10/5BASES AND RAILS

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



DIMENSIONS AND LOAD SHELF STORAGE WALLS M10/5

A30 A A A A A

E

GFBD AF AF AF AF AF

30

D

D

D

D

D

C

B57

25

25

25

25

105

30

Load

A Unit width Axis dimensions 850mm 1000mm 1255mmFor shelf widths 850mm 1000mm 1255mm

B Shelf depth actuel measure 310mm 360mm 410mm 510mm 610mmFor shelf depths 300mm 350mm 400mm 500mm 600mmWith hinged doors 340mm 390mm 440mm 540mm 640mmWith sliding doors 415mm 465mm 515mm 615mm 715mm

C Shelf heigth actuel measure 2000mm 2200mm 2500mmWith hinged doors 2000mm 2200mm 2500mmWith sliding doors 2000mm 2200mm 2500mm

D Lichte Höhen Anzahl Schlitzteilungen x 25mmE Shelf length Anzahl Feldbreiten + 60mm

Beispiel: 2 x 850mm + 2 x 1000mm + 1 x 1255mm + 60mm = 5015mm

Slot pitch of side panels every 25mm, to fit up shelf supports.Shelf every 15mm, to divide with plain partitions and shelf dividers

GF = Basic unitAF = Add-on unitBD = Instruction page: Mobile shelving

Load per unit (= max. unit load) 500kg.

• The shown load capacities are only valid if always first and every following third section is equipped with rearpanels or diagonal braces.


shelf sTorage walls m10/5componenT parTs

Side panels

With angled edge at front and back. Slot spacing25mm for fitting shelf supports.Specification: Sheet-steel construction. Colour: As percolour chart.


Widthmm

Depthmm

Heightmm

45.131 300 25 310 200045.132 300 25 310 220045.133 300 25 310 250045.134 350 25 360 200045.135 350 25 360 220045.136 350 25 360 250045.137 400 25 410 200045.138 400 25 410 220045.139 400 25 410 250045.140 500 25 510 200045.141 500 25 510 220045.142 500 25 510 250045.143 600 25 610 200045.144 600 25 610 220045.145 600 25 610 2500

End panels

Plain end panel angled as C-section at front and back.Slot spacing 25mm for fitting shelf supports.Specification: Sheet-steel construction. Colour: As percolour chart.


Widthmm

Depthmm

Heightmm

45.085 300 30 310 200045.086 300 30 310 220045.087 300 30 310 250045.088 350 30 360 200045.089 350 30 360 220045.090 350 30 360 250045.091 400 30 410 200045.092 400 30 410 220045.093 400 30 410 250045.094 500 30 510 200045.095 500 30 510 220045.096 500 30 510 250045.097 600 30 610 200045.098 600 30 610 220045.099 600 30 610 2500

Rear panels

Cover behind shelf units. Also serves to stabilize theshelves longitudinally. The rear panels are screwed tothe side panels. Incl. Screw fixing material.Specification: Sheet-steel construction with visiblescrew fixings. Colour: As per colour chart.

For basic sections

Ref no.For self widthsmm


Widthmm

45.122 850 2000 Basic section 88045.123 850 2200 Basic section 88045.124 850 2500 Basic section 88045.119 1000 2000 Basic section 103045.120 1000 2200 Basic section 103045.121 1000 2500 Basic section 103045.125 1255 2000 Basic section 128545.126 1255 2200 Basic section 128545.127 1255 2500 Basic section 1285


For add-on sections

Ref no.For self widthsmm


Widthmm

45.113 850 2000 Add-on section 88045.114 850 2200 Add-on section 88045.115 850 2500 Add-on section 88045.110 1000 2000 Add-on section 103045.111 1000 2200 Add-on section 103045.112 1000 2500 Add-on section 103045.116 1255 2000 Add-on section 128545.117 1255 2200 Add-on section 128545.118 1255 2500 Add-on section 1285

Diagonal braces

For longitudinal stabilization instead of using rear pan-els. Incl. screw fixing material.Specifications: Galvanized sheet-steel construction.


Storage heightmm

45.146 850, 1000, 1255 2000, 2200, 2500


Shelves plain

Made of sheet steel, incl. shelf supports. Colour: ac-cording to colour chart.

Shelves plain painted

Ref no.Widthmm

Depthmm


46.087 850 300 90 M10 / 61046.097 850 300 170 M10 / 61146.088 850 350 90 M10 / 61046.000 850 350 170 M10 / 61146.089 850 400 90 M10 / 61046.001 850 400 170 M10 / 61146.090 850 500 50 M10 / 61046.002 850 500 170 M10 / 61146.101 850 500 240 M10 / 61246.091 850 600 50 M10 / 61046.043 850 600 170 M10 / 61146.102 850 600 240 M10 / 61243.189 1000 300 80 M10 / 61043.192 1000 300 160 M10 / 61143.190 1000 350 80 M10 / 61043.193 1000 350 160 M10 / 61143.191 1000 400 80 M10 / 61043.194 1000 400 160 M10 / 61143.187 1000 500 40 M10 / 61043.195 1000 500 160 M10 / 61143.199 1000 500 220 M10 / 61243.188 1000 600 40 M10 / 61043.196 1000 600 160 M10 / 61143.200 1000 600 220 M10 / 61246.092 1255 300 70 M10 / 61046.098 1255 300 140 M10 / 61146.093 1255 350 70 M10 / 61046.003 1255 350 140 M10 / 61146.094 1255 400 70 M10 / 61046.004 1255 400 140 M10 / 61146.095 1255 500 30 M10 / 61046.005 1255 500 140 M10 / 61146.105 1255 500 200 M10 / 61246.096 1255 600 30 M10 / 61046.044 1255 600 140 M10 / 61146.106 1255 600 200 M10 / 612

Shelves plain galvanized

Ref no.Widthmm

Depthmm


43.244 850 350 90 M10 / 61043.245 850 500 170 M10 / 61143.038 1000 350 80 M10 / 61043.037 1000 500 160 M10 / 61143.334 1255 350 70 M10 / 61043.335 1255 500 140 M10 / 611

Shelves slotted

Made of sheet steel, incl. shelf supports. Slots at15mm increments.Colour: according to colour chart.

Shelves slotted painted

Ref no.Widthmm

Depthmm


46.135 850 300 150 M10 / 64046.137 850 300 230 M10 / 64146.006 850 350 150 M10 / 64046.138 850 350 230 M10 / 64146.007 850 400 150 M10 / 64046.139 850 400 230 M10 / 64146.008 850 500 150 M10 / 64046.140 850 500 230 M10 / 64146.045 850 600 150 M10 / 64046.141 850 600 230 M10 / 64143.277 1000 300 120 M10 / 64043.282 1000 300 200 M10 / 64143.278 1000 350 120 M10 / 64043.283 1000 350 200 M10 / 64143.279 1000 400 120 M10 / 64043.284 1000 400 200 M10 / 64143.280 1000 500 120 M10 / 64043.285 1000 500 200 M10 / 64143.281 1000 600 120 M10 / 64043.286 1000 600 200 M10 / 64146.136 1255 300 90 M10 / 64046.142 1255 300 170 M10 / 64146.009 1255 350 90 M10 / 64046.143 1255 350 170 M10 / 64146.010 1255 400 90 M10 / 64046.144 1255 400 170 M10 / 64146.011 1255 500 90 M10 / 64046.145 1255 500 170 M10 / 64146.046 1255 600 90 M10 / 64046.146 1255 600 170 M10 / 641


Shelf supports

Identical bottom support for both types of shelf.

Ref no.101.749 Additional shelf support clips (4x)


Dividers

For partitioning of the slotted shelves.Specification: sheet steel. Colour: light greyRAL 7035.

Dividers


Heightmm

100.447 300 95100.448 300 145100.449 300 195100.452 350 95100.453 350 145100.454 350 195100.465 400 95100.466 400 145100.467 400 195100.483 500 95100.484 500 145100.485 500 195100.493 600 95100.494 600 145100.495 600 195The spacing between the shelves is at least 25mm more than the height of the separators.

Partitions

For partitioning of the slotted shelves. The dividers fitinto the slots of the upper and lower shelves and theheight of the divider and the shelf spacing should cor-respond.Specification: sheet steel. Colour: light grey RAL7035.


Heightmm

100.574 300 250100.576 300 300100.577 300 325100.578 300 350100.580 300 400100.594 350 250100.596 350 300100.597 350 325100.598 350 350100.600 350 400100.614 400 250100.616 400 300


Heightmm

100.618 400 350100.620 400 400100.617 400 325100.655 500 250100.658 500 300100.661 500 350100.664 500 400100.702 600 250100.704 600 300100.706 600 350100.708 600 400

Useful space between shelves is equal to the height of the dividers.

Guide rails

Guide rails for fitting on slotted shelves where storagecontainers, plastic drawers and shelf boxes are re-quired.Made of sheet steel. Colour: light grey RAL 7035.


Heightmm

43.339 300 2543.340 350 2543.341 400 25


Heightmm

43.342 500 2543.343 600 25

Shelf fronts

Incl. 2 shelf supports and fixing material.Specification: sheet steel. Colour: light grey RAL7035.


Heightmm

46.036 850 9544.769 1000 9546.039 1255 95


Drawers




Useful heightmm

Useful widthmm

Useful depthmm

Carryingcapacitykg




Sliding tray units



Ref no.Widthmm

Depthmm

Heightmm



Ref no.Widthmm

Depthmm

Heightmm






Ref no.Lengthmm

Heightmm


Packing unitspieces

18.926 105 22 14 118.927 210 22 14 118.929 1000 22 14 1


Ref no.Lengthmm

Heightmm


Packing unitspieces

18.930 105 22 14 1018.931 210 22 14 10


Ref no.Label sizemm



Label holder DIN A5

For the labelling of shelves, etc.Specification: acrylic, including shelf-adhesive stripsand paper label.

Ref no.Lengthmm

Widthmm

Depthmm

44.679 210 151 6

Hinged doors

Double-hinged doors with 2-position locking rod andcylinder lock. Doors can be retrofitted to shelf storageunits. Not possible with drawers of shelf storage wallsM10.Specification. sheet steel. Colour: according to colourchart.

For basic sections


Heightmm

45.210 850 200045.211 850 220045.489 850 250045.213 1000 200045.214 1000 2200


Heightmm

45.490 1000 250045.216 1255 200045.217 1255 220045.491 1255 2500

For add-on sections


Heightmm

45.233 850 200045.234 850 220045.492 850 250045.236 1000 200045.237 1000 2200


Heightmm

45.493 1000 250045.239 1255 200045.240 1255 220045.494 1255 2500


Sliding doors

Each pair of sliding doors closes a 2-shelf section.Doors run easily and quietly on rollers in tracks fittedat top and bottom on vertical storage unit supports.Equipped with rotary cylinder lock. Doors open to give



Heightmm

45.465 2 x 850 200045.466 2 x 850 220045.467 2 x 850 250045.468 2 x 1000 200045.469 2 x 1000 2200


Heightmm

45.470 2 x 1000 250045.471 2 x 1255 200045.472 2 x 1255 220045.473 2 x 1255 2500



Depthmm

55.779 2000 10555.780 2200 10555.781 2500 105Storage unit depth with sliding doors: side-wall depth + 105mmAttention:Locking doors must always be on the right. Hinged doors cannot be fitted immediately adjacent to slidingdoors.


dusT proTecTion

This protection prevents dust from getting into theshelf units when trolleys are pushed together.

Shelves with dust protection

These shelves have a metal lip which stops dust get-ting into closed shelving bays.Specification: Sheet-steel construction incl. shelf sup-ports. Colour: According to colour chart

Ref no.Widthmm

Depthmm


44.112 850 300 90 M10/610S44.122 850 350 90 M10/610S44.130 850 400 90 M10/610S44.149 850 500 50 M10/610S44.171 850 600 50 M10/610S44.022 1000 300 80 M10/610S44.023 1000 350 80 M10/610S44.024 1000 400 80 M10/610S44.025 1000 500 40 M10/610S44.026 1000 600 40 M10/610S44.194 1255 300 70 M10/610S44.202 1255 350 70 M10/610S44.221 1255 400 70 M10/610S44.243 1255 500 30 M10/610S44.266 1255 600 30 M10/610S

Vertical dust protection

A rubber profile which is screwed vertically to the endpanel.Specification: Rubber profile incl. steel fixing material.Colour: Black.


Prevent dust collectingheightmm Number

44.508 2000 1975 144.509 2200 2175 144.510 2500 2475 1

Dust protection for end panel

Top cover of the end panel. The section also stops dustgetting into the shelving.Specification: Sheet-steel construction. Colour: Lightgrey RAL 7035


45.154 30045.155 35045.156 400


45.157 50045.158 600


file uniT and file sTorage sysTems

Pull-out file suspension frame

Suitable for A4 suspension files. Middle frame adjust-able for other sizes. Maximum load: 60kg. With as-sembly material.Specification: Sheet-steel with stove-enemal finish.Colour: grey NCS S 2502-R.



Number ofcentre struts

35.100 850 350 1 232.350 1000 350 3 235.101 1255 350 2 335.102 850 400 1 232.361 1000 400 3 235.103 1255 400 2 335.104 850 500 1 232.369 1000 500 3 235.105 1255 500 2 3

Pull-out shelves

With full extension. Maximum load: 50kg.Specification: Sheet-steel with stove-enemal finish.Colour: grey NCS S 2502-R. With assembly material.


Shelf depthmm

Useful widthmm

Useful depthmm

35.109 850 350 680 33732.723 1000 350 875 33735.110 1255 350 1040 33735.111 850 400 680 33732.713 1000 400 875 33735.112 1255 400 1040 33735.113 850 500 680 43732.718 1000 500 875 43735.114 1255 500 1040 437

Assembly material




For each unit 1 set



For file storage system: Class-O-Rama 2, Datox-EDPfiles and Accodata suspension rails 50085. Incl. 1 setshelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.124 850 35032.402 1000 35035.125 1255 35035.126 850 40032.411 1000 40035.127 1255 40035.128 850 50032.420 1000 50035.129 1255 500


For file storage system: Accodata 50086, Slim Control,Voko and Elba-suspension files DIN A4. Incl. 1 set shelfsupports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.137 850 35032.517 1000 35035.138 1255 35035.139 850 40032.526 1000 40035.140 1255 40035.141 850 50032.535 1000 50035.142 1255 500


For file storage system: Vetro-Lateral files A4 lateral,(985 x 450 A4 lateral and transparencies). Incl. 1 setshelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.143 850 35032.559 1000 35035.144 1255 35035.145 850 40032.568 1000 40035.146 1255 40035.147 850 50032.578 1000 50035.148 1255 500


For file storage system: Docu-Mate (Wright line) forcassettes, print-out files and suspension files, tape-seal rings for models IBM, Nashua, Wright-line, etc. In-cl. 1 set shelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.130 850 35032.424 1000 35035.131 1255 35035.132 850 40032.433 1000 40035.133 1255 40035.134 850 50032.442 1000 50035.135 1255 500



For file storage system: Datox EDP files, Monopendexsuspension frames and files, ELBA-centre point sus-pension files 91460, Leitz and Eichner suspensionfiles. Incl. 1 set shelf supports.Specification: sheet steel with stove-enemal finish.Colour: grey NCS S 2502-R.


Shelf depthmm

35.149 850 35032.581 1000 35035.150 1255 35035.151 850 40032.590 1000 40035.152 1255 40035.153 850 50032.599 1000 50035.154 1255 500


shelf screw connecTions

End panel screw connections

A closing wall screw connection is required when diag-onal braces are used in double shelves. One packagingunit of screw connection material is needed for closingwalls which are not screwed to diagonal braces.

Ref no. Number of packing units45.148 7

Top panel screw connection

This is used with a central or aisle lock. It serves toscrew fasten the top shelves. This stops unauthorizedentry into a closed aisle by lifting the shelves. The re-quired number of screw connections corresponds tothe number of panels.

Ref no. Number45.159 For end panel 245.160 For side panel 4

Shelf screw connection on trolley

When an anti-tilting device is installed, the shelvingmust be screwed to the trolley. Single trolleys alwayshave this screw connection.

Ref no. Specification Number45.152 Fixing material for 1 panel 1

Wall fixture (M10 / 5)

A stabilizing fixture on walls and ceilings for fixed trol-leys. Adjustment range: 8 - 210mm.Specification: Sheet-steel construction. Colour: Lightgrey RAL 7035.

Ref no. Specification Number43.446 Adjustable wall fixure 1


OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Sliding cabinetsIntroduction 194

Sliding cabinets 196

Dividing material 198


Inarchives, inbusinessand industry, in theoffice

and in the home, space for storage is always

at a premium. Hardly have you provided

extra capacity, and you’re back to where

you started: no more room. And the solution?

One answer is to clear out the contents and

throw them away; the other is the sliding

cabinet.

With the sliding cabinet, you suddenly have

twice the storage area within the same

space and no need for extension work! The

principle is simple: you slide the individual

cabinets together, and part them only where

you wish to retrieve an item. The individual

units move easily on the guide rails, and

even when full, the sliding cabinet can be

SLIDING CABINETSTHE CABINET YOU HAVE BEEN WAITING FOR

moved without effort. Is your sliding cabinet

in a freely accessible area? No problem!

With the robust central cylinder lock, only

those in possession of a key can open it.

The sliding cabinet: the space miracle at an

attractive price.

capri blueRAL 5019

light blueRAL 5012


ruby redRAL 3003

pure whiteRAL 9010

light greyRAL 7035


blackNCS S 9000-N



ADVANTAGES

Sliding cabinets

The optimal solution

You only need fixed shelving when you require simultaneous access to all storagegoods. Free alleys between all the shelves are otherwise uneconomical. So insteadof numerous access alleys between fixed shelves that cost you space, with theLista-Miniroll you need just one free alley to reach all shelves easily. Just slide yourstoreroom together slightly. It couldn’t be easier.

Packing and assemblyThe sliding cabinet is supplied in flat packs. Thanks to a refined system design,cabinets can be assembled very quickly. Each unit includes clear assembly instruc-tions. As opposed to rigid systems, the sliding cabinet can be assembled withoutside clearance. Any niche in the building can therefore be fully utilised.

Rugged constructionThe sliding cabinet is available in 8 standard colours. With the sliding cabinet sy-stem, Lista enables you to store far more, with clear organisation and constant ac-cess. The movable cabinet sections are fitted with large-scale ball bearings that runquietly and easily on steel runners. Load capacity is excellent: one single cabinet canhold up to 300kg, and a double-width unit as much as 600kg.

One basic cabinet is fitted stationary, left or right. The pedestal frame is fabricatedfrom welded sheet frames. The pedestal base is made of melamine-coveredchipboard. The pedestal is equipped with levelling screws.

Whether in the office, the workshop or the household, the sliding cabinet is the idealsolution. Practical examples show what you can store while saving space, andstill maintain rapid access. Files, suspended folders, register card indexes, clothes,fittings, electrical and electronic accessories, shoes, paints, medicaments, toysfor kids and lots, lots more. The sliding cabinet demands little space and offers astorage capacity that you would never have thought possible.

That’s why it isn’t only craftsmen who swear by the sliding cabinet, but also localauthorities. On the one hand, tools and small items can be kept in a clear order; onthe other hand, filing and records departments are no longer bursting at the seams.And meanwhile, there are many housewives who wouldn‘t do without their practicalsliding cabinet.

So when are you going to use a sliding cabinet for your storage?


sliding cabineTsPlanning instruction:Partitions and shelf dividers can only be used with slotted shelves!Design stipulations mean that plain shelves are always used for bases and tops. These do notpermit the utilisation of partitions (shelf) and shelf dividers (base and top).

The sliding cabinet is available in numerous sizes,based on the shelf sizes of 850 or 1000mm in widthand 350mm in depth. All versions are 1895mm inheight. Lista makes order into a system, so it's no sur-prise that add-on modules can extend the basic mod-ule as required. The sliding cabinet also offers great in-

ternal flexibility, whether shelves, shelf front coverstrips for loose articles, clothes rails, compartment in-serts or extension frames for suspended files. For allproducts in need of storage, Lista offers the rightspace-saving solution.

Shelf size 850 x 350mm

Basic module complete, double cabinet with diagonal braces

Ref no. Basic module complete48.327 Without accessories, empty48.329 With 16 shelves plain, enamelled48.330 With 16 shelves slotted, enamelledComprising:1 single cabinet, fixed, with rear panel, without handle1 double cabinet mobile, with diagonal bracings, with 2 handles1 single cabinet, mobile, with rear panel, with handle1 central locking system2 dust seals4 label holders, DIN A51 base

Basic module complete, double cabinet with rear panel

Ref no. Basic module complete48.331 Without accessories, empty48.333 With 16 shelves plain enamelled48.334 With 16 shelves plain, enamelledComprising:1 single cabinet, fixed, with rear panel, without handle1 double cabinet, mobile, with rear panel, with 2 handles1 single cabinet, mobile, with rear panel, with handle1 central locking system2 dust seals4 label holders, DIN A51 base

Add-on module complete, double cabinet with diagonal braces

Ref no. Add-on-module, complete48.335 Without accessories, empty48.337 With 8 shelves plain, enamelled48.338 With 8 shelves plain, enamelledComprising:1 double cabinet mobile, with diagonal bracings, with 2 handles1 dust seal2 label holders, DIN A51 base

Add-on module complete, double cabinet with rear panel

Ref no. Add-on-module, complete48.339 Without accessories, empty48.341 With 8 shelves plain, enamelled48.342 With 8 shelves slotted, enamelledComprising:1 double cabinet, mobile, with rear panel, with 2 handles1 dust seal2 label holders, DIN A51 base


Shelf size 1000x350mm

Basic module complete, double cabinet with diagonal braces

Ref no. Basic module complete48.311 Without accessories, empty48.313 With 16 shelves plain, enamelled48.314 With 16 shelves slotted, enamelledComprising:1 single cabinet, fixed, with rear panel, without handle1 double cabinet mobile, with diagonal bracings, with 2 handles1 single cabinet, mobile, with rear panel, with handle1 central locking system2 dust seals4 label holders, DIN A51 base

Basic module complete, double cabinet with rear panel

Ref no. Basic module complete48.315 Without accessories, empty48.317 With 16 shelves plain, enamelled48.318 With 16 shelves plain, enamelledComprising:1 single cabinet, fixed, with rear panel, without handle1 double cabinet, mobile, with rear panel, with 2 handles1 single cabinet, mobile, with rear panel, with handle1 central locking system2 dust seals4 label holders, DIN A51 base

Add-on module complete, double cabinet with diagonal braces

Ref no. Add-on-module, complete48.319 Without accessories, empty48.321 With 8 shelves plain, enamelled48.322 With 8 shelves slotted, enamelledComprising:1 double cabinet mobile, with diagonal bracings, with 2 handles1 dust seal2 label holders, DIN A51 base

Add-on module complete, double cabinet with rear panel

Ref no. Add-on-module, complete48.323 Without accessories, empty48.325 With 8 shelves plain, enamelled48.326 With 8 shelves slotted, enamelledComprising:1 double cabinet, mobile, with rear panel, with 2 handles1 dust seal2 label holders, DIN A51 base


parTiTion maTerial

A large number of lateral profiles and the Class-ORama are available.Ask for our detailed documents.

While the sliding cabinet is in itself an ingenious prob-lem solution, it is the partitioning components that, indetail, make the space miracle possible. Plain or slot-ted shelves which can be divided at partial or fullheight, and shelf front cover strips that also enableloose articles to be stored with minimum space re-

quirement. Naturally, the range also includes a clothesrail. Further accessories available for use in the officeor the filing department are partitions, extensionframes for suspended files, and lateral sections formost of the lateral systems.

Shelves plain

Specification: sheet steel galvanized or enamelled, in-cluding 4 brackets. Colour: light grey RAL 7035.

Galvanised

Ref no.Widthmm

Depthmm

Carryingcapacitykg

48.409 850 350 9048.408 1000 350 80

Enamelled

Ref no.Widthmm

Depthmm

Carryingcapacitykg

48.379 850 350 9048.377 1000 350 80Height: 25mm

Shelves slotted

Specification: sheet steel, including 4 brackets. Col-our: light grey RAL 7035.

Ref no.Widthmm

Depthmm

Carryingcapacitykg

48.383 850 350 15048.381 1000 350 120Height: 25mm

Dividers

Divider height does not depend on shelf spacing.Specification: sheet steel, enamelled. Colour: lightgrey RAL 7035.

Ref no.Heightmm

Shelf depthmm

48.385 95 35048.387 145 350

Partitions

Partition height depends on the shelf spacing.Specification: sheet steel, enamelled. Colour: lightgrey RAL 7035.

Ref no.Heightmm

Shelf depthmm

48.389 300 35048.391 325 35048.392 350 350


Shelf fronts

Including 2 shelf brackets and fastening material.Specification: sheet steel. Colour: light grey RAL7035.


Heightmm

48.395 850 9548.394 1000 95

Sliding tray units



Ref no.Widthmm

Depthmm

Heightmm



Ref no.Widthmm

Depthmm

Heightmm


Extension frames for suspended files

With full extension frame to accomodate suspendedfiles A4. The middle web is steplessly adjustable toother formats.Specification: sheet steel. Colour: grey NCS S 2502-R.

Ref no.Unit widthmm


Number of mid-dle webs

Carryingcapacitykg

48.416 850 350 1 2 6048.417 1000 350 2 2 60

Assembly material





For each unit 1 set

Handle

Specification: black plastic, including screws.

Ref no.48.398 Handle, complete

Cover

Specification: black plastic.

Ref no.48.411 Cover

Label holder

Specification: acrylic, including shelf-adhesive stripsand paper label.

Ref no.48.410 Label holder DIN A5 landscape


OVERVIEW

Drawer systems


Workstations


Shelf systems





> Pallet rackings

> Mobile shelving

> Sliding cabinets



Office systems

ESD


Partition material


Table of conTenT

Stairs and LaddersOrdering examples mobile safety ladders 204

Ordering ex. ladders for shelvings 206


sTairs and laddersmobile safeTy ladders

Hardwood steps with edge protectors. All ladders withsteering bases and zinc-plated brakes.Made of quality tubular steel. Colour: yellow RAL1004. Space between steps: floor to first step 240mm,all other steps are spaced 230mm.

Type 3

Ref no. SpecificationWidthmm

Depthmm

Heightmm

Top stepmm

65.008 With 3 steps 500 690 1150 700With 1 shelf height from floor 1150mm with push handles

Type 4


Depthmm

Heightmm

Top stepmm


Type 5


Depthmm

Heightmm

Top stepmm


Type 15

As type 5, but with handrail on the entire length of theladder

Ref no.Widthmm

Depthmm

Heightmm

Top stepmm

65.018 500 1010 1610 1160With 1 shelf height from floor 1610mm with push handles

Type 6


Depthmm

Heightmm

Top stepmm

65.011 With 6 steps 500 1060 1840 1390


With 1 shelf height from floor 1840mm with push handles

Type 16


Ref no.Widthmm

Depthmm

Heightmm

Top stepmm


Type 7


Depthmm

Heightmm

Top stepmm


Type 17


Ref no.Widthmm

Depthmm

Heightmm

Top stepmm



ladders for shelvings

Safety ladders




Min. roomhightmm


Pair of rails


Ladder H5

Fold-away ladder with non-slip rubber feet, safety-slanted top rail and shelf with ribbed rubber mat. Canbe mounted and screwed to the top and bottomshelves of trolley, type B316.Made of light metal ladder steel profiles. Colour: yel-low RAL 1004. Black ribbed rubber mat.


Heightmm

13.133 With 3 steps 480 156515.334 With 4 steps 480 1790

Single-sided step ladders

Ladder width: 400mm, 80mm deep, vertical distancebetween steps: 235mm. Top roller fitting retractableto allow the ladder to be stored against the shelf unitwhen not in use. When climbed, the ladder is automat-

ically braked.Colour: green, hammer tone, natural wood. Ladderguide section: anthracite RAL 7016.

Ladder single-sided


Vertical height yLadder guidemm Number of steps

Projection xmm

65.030 2000 - 2500 1810 - 2080 6 72065.031 2200 - 2700 2060 - 2320 7 81065.032 2500 - 3000 2320 - 2550 8 89065.035 2700 - 3200 2550 - 2790 9 97065.036 2900 - 3400 2790 - 3060 10 1050


Ladder guide section, single-sided

Ref no.65.037 Ladder guide section, single-sided, including fixing materials per lmShelving systems with ladder access must be securely fixed. When ordering, specify shelving length and sectionwidth.

Double-sided step ladders

Ladder width: 400mm, 85mm deep, vertical distancebetween steps: 235mm. The ladder slides sidewaysand can be rotated through 360° at the roller head. Itcan be suspended at the top, allowing it to be movedby the overhead trolley. When the ladder is climbed,

the overhead trolley and the bottom roller fitting areautomatically braked.Colour: green, hammer tone, natural wood. Ladderguide section: anthracite RAL 7016.

With transverse slider, up to 1000mm alley width



65.038 2200 2030 - 2230 565.039 2500 2460 - 2580 765.040 3000 2950 - 3050 9

With transverse roller device from 1001 up to 1700mm alley width



65.041 2200 2030 - 2230 565.042 2500 2460 - 2580 765.043 3000 2950 - 3050 9

Ladder guide section, doube-sided

Ref no.65.023 Ladder guide section, doube-sided, including fixing

materials.per lm

Single sided handrail

Ref no.65.024 Single-sided handrail for screw connection to the ladder leg.Shelving systems with ladder access must be securely fixed. When ordering, specify shelving length, sectionwidth and alley width.

LISTA Shelving systems - TechPoint Systemteknik AB · LISTA_Shelving systems. 2 01/2007; © LISTA...

Documents

Transcript of LISTA Shelving systems - TechPoint Systemteknik AB · LISTA_Shelving systems. 2 01/2007; © LISTA...