List of Ph.D. Graduates 1971 - Indian Institute of Science(E.S.Dwarakadasa and Kishore)...
Transcript of List of Ph.D. Graduates 1971 - Indian Institute of Science(E.S.Dwarakadasa and Kishore)...
List of Ph.D. Graduates 1971 1. K.S. Raman (K.I. Vasu) Resistometric studies of solute vacancy interactions and clustering kinetics in
an FCC matrix (Al-Zn alloy with Ag, Co, Dy, Li, Nb, Pt, Sn, Y or Yb) 2. E.S. Dwarakadasa (K.I. Vasu) Resistometric studies of clustering and solute vacancy interactions in some
aluminium alloys 3. D.H. Sastry (K.I. Vasu) Thermally activated deformation in CPH metals and the effect of crystal
structure on the mechanism of low temperature creep in metals 4. Y.V.R.K. Prasad (K.I. Vasu) Effect of stacking fault energy, quenched-in defects and solute atoms on the
low temperature deformation mechanism in FCC metals 5. S. Seetharaman (K.P. Abraham) Thermodynamic properties of some binary metal oxide solid solutions 1972 6. Y.M. Faruq Marikar (K.I. Vasu) Electrometallurgy of the iron group metals and alloys: Studies in the fluoborate
bath 7. Krishna Kant Prasad (K.P. Abraham) Thermodynamic properties of some binary metal oxide systems 8. K. Narasimha Murthy (K.I. Vasu) Resistometric studies of precipitation kinetics in aluminium-silver alloys (Al-0.2
to 0.3 Ag alloys, and Al-0.64Ag alloy with Nb, Si, Ge, Ti, Gd, Sn or Pb) 1974 9. V.V.V.N.S. Ramakrishna Rao (K.P.Abraham) Kinetic aspects of gas/solid reactions of metallurgical interest 10. Tarasankar Deb Roy (K.P. Abraham) Kinetic investigations on gas-solid reactions 11. Kishore (K.I. Vasu)
On the nature of clustering and strengthening in a quenched and aged aluminium 2% germanium alloy-resistometric, microscopic and low temperature deformation studies.
12. R. Chandrashekar (K.I. Vasu) Stress corrosion of aluminium 8% magnesium alloy (effect of nature of stress,
heat treatment and trace additions of B and Be) 1975 13. T.C. Kasiviswanathan (K.I. Vasu) Corrosion and related electrochemical studies on zirconium (in nitrate melts,
nitrate fluoride melts and aqueous nitrate solutions) 14. H. Ravindranath Shetty (Y.V.R.K. Prasad and K.I. Vasu) Superplasticity and stress corrosion cracking behaviour of zinc- aluminium and
copper-aluminium alloys (effect of mechanical, metallurgical and environmental factors)
15. V. Sivan (G.N.K. Iyengar) Kinetic studies on gas solid reactions of metallurgical interest 1976 16. T. Hanumantha Rao (K.I. Vasu) Oxide-dispersed copper nickel composites and kinetics 17. Uppala Ratnam (K.P. Abraham and J.P. Hajra) Studies on electroslag melting of quality steels and nickel base alloys 18. Placid Rodriguez (K.I. Vasu and M.K. Asundi, BARC ) Low temperature deformation in hard HCP metals 19. N.S. Srinivasan (A.K. Lahiri) Studies on the reduction of iron oxides by carbon 20. V.S. Raghunathan (K.I. Vasu & B.B. Sharma) Diffusion in transition metals alloys 1977 21. A.K. Bhutani (K.P. Abraham) Studies on electroslag remelting 22. Ch. Virupaksha Shastry (D.H. Sastry and K.I. Vasu)
Deformation characteristics of BCC metals 23. E. Elaya Perumal (K.I. Vasu and J. Balachandra) Stress corrosion cracking of Zr & zircaloy 2 in Ch3OH-(HCL, I2) solutions 24. S. Raghavan (G.N.K. Iyengar and K.P. Abraham) Thermodynamic investigations on binary metal oxide solutions by the solid
electrolyte techniques 25. C.R. Vijayasimha (K.I. Vasu and V.G. Kubair,CH ) Heat transfer of liquid metals 1979 26. D. Banerjee (K.I. Vasu) Phase equilibria and transformations : A microstructural characteri-sation of
some Ti-Al-Mo alloys containing the - phase 27. N. Jayaraman (M. Mohan Rao) Studies on maraging and reversion to austenite in Fe-12Ni-4Mn maraging steel 28. A.H. Yegneswaran (K.S. Raman) Effect of crystallographic texture and grain size on the mechanical properties of
warm worked Cd, Cd-1.5Zn and Cd-1Ag alloys 29. S. Ilangovan (K.I. Vasu) Galvanic cementation winning of copper from chalcopyrite leached with ferric
chloride solution 30. Deonath (P.K. Rohatgi) Preparation and properties of cast aluminium alloy-mica particle composite 31. N.K. Jain (Y.V.R.K. Prasad and K.P. Abraham) Hot working and deformation mechanism in electroslag refined materials (En
36A steel and RR 58 aluminium alloy) 1980 32. H.V. Sudhaker Nayak (Y.V.R.K. Prasad and K.I. Vasu) Texture-dependent stress corrosion failure of commercial titanium and Ti-6Al-
4V alloy sheets in methanol bromine solution 33. J. Subrahmanyam (K.P. Abraham and A.K. Lahiri) Chemical vapour deposition of titanium carbide from titanium tetrachloride-
toluene-hydrogen gas mixtures
34. Mohan G. Hebsur (Y.V.R.K. Prasad and K.P. Abraham) Effect of electroslag refining on hot workability, fracture toughness and fatigue
crack propagation in EN24 and EN52 steels 1981 35. M.V. Bhat (K.I. Vasu) Stress-corrosion characteristics of Al-5%Zn and Al-5%Cu alloys and effect of Ti
addition 36. Srinivas D Sastry (Y.V.R.K. Prasad, K.P. Abraham and P.K. Rohatgi) Influence of microstructure on strengthening and fracture mechanisms in
electroslag refined Fe-12Cr-6Al ferritic stainless steel 37. Anand Jagu Katkar (K.I. Vasu) Corrosion behaviour of nickel silver and cupro-nickel in sea water 38. G. Sambasiva Rao (Y.V.R.K. Prasad) Influence of texture on the grain boundary strengthening and fracture in hot
rolled Mg and Mg alloys 1982 39. Sardari Lal Mannan (Y.V.R.K.Prasad, K.I.Vasu and P.Rodriguez, IGCAR) Influence of grain size on the flow and fracture in AISI Type 316 stainless steel
at elevated temperature. 40. G.S.Murthy (D.H.Sastry) Impression creep and the mechanism of high temperature deformation in zinc
and cadmium 41. P.K.Biswas (E.S.Dwarakadasa and P.K.Rohatgi) Influence of internal chills on the structure and properties of aluminium alloy
castings 42. A.W.S. Kurny (R.M. Mallya and M.Mohan Rao) Studies on ion nitriding 1983 43. A.M.Sriram Murthy (Y.V.R.K.Prasad and S.N.Tewari, DMRL ) Influence of microstructure on the deformation and fracture behaviour of a
nickel-33% molydbenum-5.7% aluminium in situ composite 44. Ram Chandra Prasad
(K.I.Vasu and E.S.Dwarakadasa) A fracture mechanics study of corrosion fatigue: Influence of microstructure on
crack propagation rates in heat treated 7075Al clad aluminium alloy 45. M.Venkatraman (J.P.Hajra) Thermodynamics of Ni-Mn and Ni-Mn-Co alloys 46. P.C.Angelo (M.Mohan Rao and D.P.Lahiri, DMRL ) Ternary diffusion studies in iron-cobalt-vanadium alloys 1984 47. R.K.Dayal (Y.V.R.K.Prasad, M.V.Bhat and J.B.Gnanamurthy, IGCAR ) Effect of texture, grainsize and carbide precipitation on the crevice corrosion
behaviour of austenitic stainless steels in acqueous medium: Metallurgical, chemical and electrochemical aspects
48. J.M.Juneja (K.P.Abraham and G.N.K.Iyengar) Themodynamic investigations on some alloy systems of interest in
metallothermic reductions by vapour pressure: Measurements and thermogravimetry
49. R.Sundaresan (K.I.Vasu, R.M.Mallya and A. C. Raghuram, NAL) Kinetics sintering in beta titanium systems: A model for enhanced diffusional
mass flow by transformation induced dislocations during isothermal sintering of titanium and Ti-6Al-4V alloy
50. Prabhakar Sastri (A.K.Lahiri) Central atoms: Models for silicate and aluminate melts 1985 51. Saradindukumar Ray (D.H.Sastry and P.Rodriguez, IGCAR ) Some aspects of the deformation characteristics of austenitic stainless steel
316 and high purity aluminium in tension, creep and stress relaxation 52. E.S.Bhagiradha Rao (R.M.Mallya, D.H.Sastry and V.S.Arunachalam, DMRL ) Studies on mechanical alloying of Ni-20Cr-2ThO2 1986 53. S.Ramesh Babu (A.K.Lahiri and M.Mohan Rao) Studies on drop formation at conical and capillary tips 54. T.S.Sampath Kumar (R.M.Mallya and M.S.Hegde, SSCU )
Electron spectroscopic studies of surface segregation and oxidation of Cu and Ni based alloys and low temperaturepreparation and characterisation of intermetallics based on the system Fe-W-Mo
1987 55. I.Sambasiva Rao (Y.V.R.K.Prasad and E.S.Dwarakadasa) Constitutive flow behaviour and processing maps for magnesium and
magnesium -1.5 zirconium 56. T.Asokan (G.N.K. Iyengar and G.R.Nagabhushana, HVE ) Developmental studies on ZnO based composites for surge arrester applications 57. V.S.Raja (S.Ranganathan and Kishore) Thermal and chemical stabilities of three Fe-Ni base metallic glasses 1988 58. M.N.Raghavendra Rao (Y.V.R.K.Prasad Kishore, B.Dattaguru, AE and R.Peravali, ADE ) Non-destructive evalluation of crack like defects and delaminations in GFRP
composites application of acousto-ultrasonics and acoustic emission techniques 59. Asok Kumar Ray (E.S.Dwarakadasa and K.S.Raman ) Studies of fatigue crack growth and fracture toughness in LA55 HSLA steel butt
welds 60. N.Thangaraj (S.Ranganathan and E.S.Raja Gopal, Phy ) Electron microscopy of quasicrystalline phases in aluminium-manganese and
aluminium-palladium alloys 61. S.Ranganathan (J.P.Hajra ) Themodynamic studies on Cr-Mn, Cr-Mn-O and Cr-Mn-Co systems using an
isopiestic technique 62. R.Akila (K.T.Jacob and A.K.Shukla, SSCU) Solid state galvanic sensors - Some studies on concepts and materials 63. K.S.Ravichandran (E.S.Dwarakadasa and Kishore) Microstructural aspects of near threshold fatigue crack growth and crack
closure in HSLA steel and Ti-6Al-4V alloy 1989 64. Gouthama (Kishore) Electron microscopic study of precipitation in an Al-Ge alloy analysis using
near-CSL/DSC lattice model
65. K.Rajendra Udupa (G.N.K.Iyengar and D.H.Sastry) Effect of electroslag re fining on composition, structure and mechanical
properties of En 24 and MDN 250 steels 66. A.Rajadurai (E.S.Dwarakadasa) Effect of 1 wt% Al/Si addition on the phase transformation, tensile and fracture
behaviour of Cu- 9Ni-6Sn spinodal alloy 1990 67. N.K.Mukhopadhya (S.Ranganathan and K.Chattopadhyay ) Some aspects of synthesis, structure and stability of quasicrystals 68. R.L.Saha (K.T.Jacob and P.Rama Rao, DMRL) Casting technology for titanium and titanium alloys characterisation of metal
mould reactions in zircon sand and investment moulds and evaluation of a hypo-eutectic cast Ti-Si alloy
69. V.Sampath (E.S.Dwarakadasa) Electroslag refining and structure property correlation studies of the aluminium
alloy IS:7670 70. S.Srikanth (K.T.Jacob) Thermodynamics of alloys: Theory, experiment and application 71. D.Sundararaman (S.Ranganathan and V.S.Raghunathan, IGCAR) Phase tranformation in Ti-N and Ti-Fe-N alloys and superconductivity 72. M.K.Yelloji Rao (K.A.Natarajan) Electrochemical aspects of interactions among ball materials and minerals with
reference to grinding and flotation of complex copper lead-zinc sulphides 73. Baldev Raj (S.Ranganathan, P.Rodriguez, IGCAR and A.K.Rao, AE ) Acoustic emission for characterising, deformation and fracture during tensile
testing in austenitic stainless steels 74. G.M. Kale (K.T.Jacob and G.N.K.Iyengar) Thermodynamic studies on selected ceramic oxide systems 75. V. Thiruvenkataswamy (S. Ranganathan and K. Chattopadhyay) Non equilibirum solidification of pure metals (Al, Cu, Ni), bismuth, eutectic Al-
Ge and Al-Cu and peritectic Al-Cr alloys 76. T.A. Bhaskaran
(S. Ranganathan and R.V. Krishnan, NAL) Microstructural studies of rapidly solidified titanium eutectoid alloys 1991 77. R. Seshadri (R.M. Mallya and R.V. Krishnan, NAL) Centrifugal splat quenching and secondary atomization of titanium alloys (Ti-
6Ai-4V & Ti-6.5Al-3.3Mo-1.6Zr-0.3S) 1992 78. K. Raviprasad (K. Chattopadhyay) Microstrucutral evolution during ordering and magnetic properties of rapidly
solidified Fe-Si alloys 79. M. Valsan (D.H. Sastry and S.L. Mannan, IGCAR) Some aspects of deformation and fracture in low cycle fatigue of a nimonic PE
16 superalloy 80. N. Ravichandran (Y.V.R.K. Prasad) Effect of impurities and hard particles on the characteristics of dynamic
recrystallization during hot working of aluminium and copper –A study using processing maps
81. B.S. Murthy (S. Ranganathan and M. Mohan Rao) Study of amorphous phase formation by mechanical alloying in Ti based
systems 1993 82. D. Padmavardhani (Y.V.R.K. Prasad) Influence of the constitutive behaviour of a and ß phases on the mechanisms of
hot working in a - b brasses and nickel silvers: A study using processing maps 83. J.K. Chakravartty (Y.V.R.K. Prasad, M.K.Asundi and S. Banerjee, BARC) Optimization of hot workability and control of microstructure in zirconium alloys
using processing maps : Zirconium, Zircalloy-2, Zr-2.5Nb and Zr-2.5 Nb-0.5 Cu
1994 84. N. Srinivasan (Y.V.R.K. Prasad) Influence of impurities and alloying additions on the processing maps for hot
working of nickel and nickel-base superalloys Ni, Ni-C, Ni-C-S, Ni-20Cr, IN 600, IN 718, Nimonic-75, 80A and 90
85. Alok Singh (S. Ranganathan)
Decagonal quasicrystals and related phases in aluminium- transition metal alloys : Al-Mn-Fe, Ni, Cu, Zn
86. Ramasis Goswami (K. Chattopadhyay) Microstructures, solidification, melting and transport properties of
nanodispersoids in immiscible alloy systems 87. Tom Mathews (K.T. Jacob and J.P. Hajra) Phase equilibria and thermodynamic studies on selected ceramic oxide systems 88. S. Murali (K.S. Raman and K.S.S. Murthy, ME ) Influence of trace additions on the microstructure, mechanical properties and
age hardening characteristics of Al-7Si-0.3 Mg cast alloy with iron impurity 1995 89. D.K. Bhattacharya (E.S. Dwarakadasa and Placid Rodriguez, IGCAR ) Characterization of microstructures in steels by magnetic and ultrasonic
techniques 90. T.V.L. Narasimha Rao (D.H. Sastry and M.V. Bhat) Aqueous corrosion and a fracture mechanics study of stress corrosion cracking
in magnesium alloys (Mg-Li-Al; Mg-Li-Al-X and Mg-Zn-Mn) 91. T. Chandrasekaran (Kishore) Kinetics of size reduction and associated wear of grinding media - study using
a ball mill 92. D.N. Drakshayani (R.M. Mallya) Reactivity of Solids : Effect of dopants on the low temperature hydrogen
reduction of ferric oxides and metastable spinels 93. O. Sivakesavam (Y.V.R.K. Prasad, P. Rama Rao and G.G. Saha, DMRL ) Effect of processing history and initial microstructure on the hot working
behaviour of magnesium, Mg-Zn-Mn, Mg-Li-Al and Mg-Li-Al-Zr Alloys : Characterisation with processing maps.
94. K. Padmanabhan (Kishore) Failure analysis of glass, carbon or kevlar fibre reinforced epoxy based
composites in static loading conditions. 95. K. Asokkumar (K.S.Raman and M.N.Chandrasekharaiah, WRI ) Studies on induction pressure welded steel joints 96. R. Nagarajan (K.Chattopadhyay and S. Ranganathan)
Metastable and nanostructured titanium-nickel and titanium- nickel-aluminium alloys
1996 97. Bhaskar Majumdar (K. Chattopadhyay and J.P. Hajra) Thermodynamics and microstructural development in immiscible systems
processed through different routes 98. Dharmendra Gupta (A.K. Lahiri) Water model study of fluid flow and slag enetrainment in a continuous slab
casting mold 99. S. Manjini (S. Ranganathan and G.N.K. Iyengar) Studies on high Tc Yba2Cu3O6+x : Stability, silver addition and thin films 100. K.M. Satyalakshmi (R.M. Mallya and M.S. Hegde, SSCU ) Studies on superconducting, metallic and ferroelectric oxide thin films and their
heterostructures grown by pulsed laser 101. Rajan Ambat (E.S. Dwarakadasa) Aqueous corrosion and high temperature oxidation studies of aluminium-lithium
alloys 102. A.K. Srivastava (S. Ranganathan) Studies on rapidly solidified Al-Mn-Cr-Si and Al-Fe-V-Si alloy : Processing -
Microstructure correlation 103. N.V. Ravi Kumar (E.S. Dwarakadasa) Characterization of indigeneous Al-Zn-Mg.SiCp metal matrix composites 104. T.R.G. Kutty (D.H. Sastry and C. Ganguly, BARC ) Microstructure, hot hardness and indentation creep of Al-U & Al-U-Zr alloys 105. Bhaskar Dutta (M.K. Surappa) Studies on particle distribution and matrix microstructure evolution during
processing of Al-Cu-SiCp composites 1997 106. K.V. Sudhakar (E.S. Dwarakadasa) Crack growth, fracture and fracture toughness behaviour of a dual phase
martensite steel 107. K.S.N. Murthy (E.S. Dwarakadasa)
Influence of metal cations (Cu2+Al3+ and Li+) on the aqueous corrosion of an Al-Li alloy
108. Dinesh Srivastava (S. Ranganathan and Srikumar Banerjee, BARC ) Phase transformations in zirconium base alloys 109. Sukanya Mukhopadhyay (K.T. Jacob and A.K. Shukla, SSCU ) Studies on phase relations, thermodynamics and electrochemistry of some ceramic oxide systems 110. N.N. Viswanathan (A.K. Lahiri and M.N. Srinivasan, ME ) Modelling of Cupola - Design and operation for minimum fuel rate and emission
levels 1998 111. N. Nagendra (Vikram Jayaram) Processing, microstructure and fracture characteristics of high volume fraction
(Al2O3/Al-AlN) matrix composites 112. P.K. Sagar (ER) (Y.V.R.K. Prasad & D. Banerjee) High temperature deformation processing of 2/O titanium aluminide alloys
using processing maps 113. T. Seshacharyulu (Y.V.R.K. Prasad) Influence of oxygen content, crystallographic texture and preform
microstructure on the processing maps for hot working of titanium and Ti-6Al-4V.
114. N.B.R. Mohan Rao (QIP) (M.K. Surappa) Studies on precipitation, recrystallization and deformation behaviour of
ceramic particle reinforced Al-10% Mg alloy composites 115. R. Jayaganthan (J.P. Hajra) Experimental investigations and thermodynamic modelling of selected III-V
semiconductor alloys 116. N. Ravi Shankar (K. Chattopadhyay) Mechanisms of phase formation and magnetic properties of nano-crystalline
materials 117. G. Chandra Mohan (QIP) (E.S. Dwarakadasa) Extrusion processing of Al-Li alloy (1441) 118. Namita Deo (K.A. Natarajan)
Studies on biobeneficiation and bioremediation using Bacillus polymyxa with reference to iron ore and bauxite processing
119. R.S. Sundar (D.H. Sastry) Processing and creep studies on Fe3Al based alloys 120. Yu Fuxiao (FN) (E.S. Dwarakadasa and S. Ranganathan) Development of liquid phase co-spray forming and its application to Al-Si-Pb
alloys 121. Azharul Haq (ER) (E.S. Dwarakadasa and S. Banerjee, BARC) Near threshold fatigue crack growth and fracture toughness studies in
zirconium, Zr-15% Ti and zircaloy-2 122. Tania Bhatia (K. Chattopadhyay and Vikram Jayaram) Phase evolution in MgO-MgAl2O4 under non-equilibrium processing conditions 1999 123. S. Prakash Narayan (Vikram Jayaram and Kunal Basu, RRL, Bhopal) The effect of strain rate and temperature on the development of magnetic
properties in nanocrystalline Nd-Fe-B alloy 124. Rajendra Kumar Rath (S. Subramanian) Polysaccharide-based investigations into the surface chemistry of some
sulphide and hydrophobic minerals and processing of a complex sulphide ore 125. Kinkar Laha (ER) (D.H. Sastry and S.L. Mannan, IGCAR) Tensile and creep behaviour of similar and dissimilar weld joints of Cr-Mo
steels 126. M. Divakar (J.P. Hajra and K.T. Jacob) Thermodynamics of surfaces and adsorption in dilute iron based systems 127. Dheepa Srinivasan (K. Chattopadhyay) Phase evolution, thermal stability and hardness of melt spun nanocrystalline Al-
Zr based alloys 128. S. Sundararajan (E.S. Dwarakadasa and R. Mahadevan, IPL) Study of the properties and particle / matrix interface in Al-12Si-10% SiCp
composite 2000 129. B. Srinivasa Rao (Vikram Jayaram)
Pressureless infiltration of A1-Mg based alloys into Al2O3 preforms 130. R. Sankarasubramanian (T.A. Abinandanan) Symmetry – breaking transitions in equilibrium shapes of coherent precipitates 2001 131. P. Shankar (S. Ranganathan and Baldev Raj, IGCAR) Thermal aging effects in nuclear grade 316LN austenitic stainless steels 132. Prajina Bhattacharya (K. Chattopadhyay) Synthesis, morphology and phase transformation of the metallic embedded
nanoparticles and multilayers 133. Anandh Subramaniam (S. Ranganathan) Metastable phases in Mg-based alloys 134. Kirity Bhusan Khan (M.K. Surappa and C. Ganguly, BARC) Processing and characterization of B4C particle reinforced Al-5% Mg alloy
matrix composites 135. V.S. Srinivasan (D.H. Sastry and K. Bhanu Sankara Rao, IGCAR) Strain controlled low cycle fatigue and creep-fatigue interaction behaviour of a
type 316L(N) stainless steel 136. R. Venkatesan (E.S. Dwarakadasa and M. Ravindran, NIOI) Studies on corrosion of some structural materials in deep sea environment 137. Sandip Bysakh (K.C. Chattopadhyay and P.K. Das, I.P.C.) Pulsed laser ablation deposition of intermetallic thin films: A study of evolution
of metastable phases and ultrafine microstructures 138. Ashutosh Suresh Gandhi (Vikram Jayaram) The processing of bulk metastable amorphous and nanocrystalline ZrO2 – Al2O3
ceramics by pressure consolidation of amrophous powders 139. R. Divakar (S. Ranganathan and V.S. Raghunathan, IGCAR) Interfaces in quasicrystalline and nanocrystalline materials: Quasicrystalline,
Al-cu-Fe and Al-Pd-Mn alloys and nanocrystalline titanium, palladium and thorium dioxide
2002 140. Viji Varghese (K. Chattopadhyay)
A study of the role of mechanical energy on the kinetics of reactions and transformations in the solid state
141. V.V. Balasubrahmanyam (QIP) (Y.V.R.K. Prasad and A.H. Chokshi) Hot deformation mechanisms and microstructural characterization in () and
titanium alloys ( Ti-5.5Al-1Fe, Ti-10V-2Fe-3Al, Ti-10V-4.5Fe-1.5Al and Ti-6.8Mo-4.5Fe-1.5Al )
142. D. Santhiya (K.A. Natarajan and S. Subramanian) Investigation into the surface chemistry of galera, sphalerite and sulphur
minerals using Thiobacillus thiooxidans and Bacillus polymyxa 143. G.S. Avadhani (SR) (Y.V.R.K. Prasad and A.H. Chokshi) Hot deformation mechanisms and microstructural evolution during upset
forging of -Fe, Fe, Fe-5Ni, Fe-5Co & Fe-5Mo alloys and maraging steel 144. Bijoysri Khan (ER) (Kishore and B. Viswanath Buffer strips in carbon-epoxy system and their influence on the mechanical
behaviour and macroscopic features in dry and wet state 145. Satyabodh M. Kulkarni (QIP) (Kishore) Processing, microstructural and mechanical behaviroal aspects of Fly ash-epoxy
composites
146. Gandham Phani Kumar (K. Chattopadhyay and P. Dutta (ME) Experimental and Computational Studies of Laser Processing of Dissimilar
Metals 147. Abha Kumari (K.A. Natarajan) Electrochemical and Microbilogical Processing of Ocean Manganese Nodules to
Recover Valuable Metals 2003 148. Lakshmi Narayan Satapathy (A.H. Chokshi and B.K. Chandrasekhar.(Orgn) Role of Second Phase in the Microstructural Development and Creep
Deformation in Alumina based Composites 149. M. Ravi (E.S. Dwarakadasa and B.C. Pai.(Orgn) Re-examination of the Formation of Porosity during solidification of Aluminium
Alloys 150. Anuradha T V (S. Ranganathan) Synthesis and Characterization of Nanostructured Materials: TiO2, TiN & BaTiO3.
2004 151. Rajashekhar Shabadi (E.S. Dwarakadasa & Subodh Kumar) Portevin Le- Chaterlier Effect and Formability Studies in Alluminium Alloys. 152. Brahmandam Sudhir (Atul H. Chokshi) Sintering and Rheology of Alumina Particulate Reinforced Alumino-Silicate Glass
Composites 153. Amitava Mukherjee (Ashok M. Raichur) Solubilization of Cu, Co and Ni from Indian Ocean Nodules using a Marine
Isolate 154. H. Ramanarayan (T.A. Abinandanan) Grain Boundary Effects on Spinodal Decomposition 155. Sanjit Bhowmick (Vikram Jayaram & S.K. Biswas, M.E.) The Nature of Contact-Induced Deformation and Fracture in TiN Films on Steel 2005 156. Kay Thi Lwin (K.T. Jacob) Structure, Thermodynamics and Phase Relations in Selected Oxide Systems 157. Sibasis Acharya (J.P. Hajra and S. Subramanian) Thermodynamics and Phase Equilibria in the Systems Involving Electronic
Materials 158. Subrata Pal (A.K. Lahiri) Mathematical Model of COREX Melter Gasifier 159. N.R. Sathya Swaroop (A.H. Chokshi) Determination of Lattice and Grain Boundary Diffusivities of Cations using
Secondary Ion Mass Spectrometry and their Application to High Temperature Deformation in a 3 mol% Yttria Stabilized Tetragonal Zirconia
160. Madakashira Phaniraj Prabhakar (A.K. Lahiri) Modeling Constitutive Behavior of Steels and Simulation of Hot Strip Mill 161. Joysurya Basu (S. Ranganathan) Glass Forming Ability and Stability: Bulk Zr-based and Marginal Al-based
Glasses 162. A.C. Niranjanappa (E.S. Dwarakadasa, Subodh Kumar & Dr. K. Ramchand (Orgn.)
Damage Characterization Studies on the Environmentally Degraded (Short-Term Aged) Polymer Matrix Composite Materials Subjected to Single and Repeated Low-Velocity Impacts
163. R. Kavitha (Vikram Jayaram) Development and Study of Oxide Films by Combustion Flame Pyrolysis 164. Ranjit Bauri (M.K. Surappa) Processing and Characterization of Al-Li-SiCp Composites 165. L. Saravanan (S. Subramanian) Surface Chemical Studies on Oxide and Carbide Suspensions in the Presence of
Polymeric Additives 166. Kottada Ravi Sankar (A.H. Chokshi) Creep and Grain Boundary Sliding in a Mg – 0.7% Alloy 2006 167. M. Jeyakumar (Subodh Kumar and Govind S. Gupta) Optimization of Process Parameters for Spray Deposition and Analyses of Spray
Deposits for 7075 Al Alloy 168. Sarmistha Bakshi (Subodh Kumar) Processing, Characterization and Mechanical Properties of Functionally Graded
Materials 169. Sabita Sarkar (Govind S. Gupta) A Cold Model Study of Raceway Hysteresis 170. Krishanu Biswas (K. Chattopadhyay and P.K. Das (I.P.C.) Rapid Solidification Behaviour of Fe-Ge Intermetallics 171. S.P. Vijayalakshmi (Ashok M. Raichur and M. Giridhar (C.E.) Degradation of Water Soluble Polymers 172. M.P. Gururajan (T.A. Abinandanan) Microstructural Evolution in Elastically Inhomogeneous Systems 173. Victoria Bhattacharya (K. Chattopadhyay) Synthesis and Phase Transformation Behavior of Nano Alloys Embedded in Al 2007 174 Vikrant Singh
(Govind S. Gupta) Modeling of liquid flow in a packed bed under influence of gas flow 175 Subhradeep Chatterjee (K. Chattopadhyay and T.A. Abinandanan) Microstructure development during laser and electron beam welding of Ti/Ni
dissimilar joints 176 Partha Patra (K.A. Natarajan) Microbially-induced mineral flocculation and flotation with proteins and
polysaccharides isolated from Paenibacillus Polymyxa 177 Debdutt Patro (Vikram Jayaram) Kinetics of pressureless infiltration of Al-Mg alloys into Al2O3 preforms: A non-
uniform capillary model 178 Evvie Chockalingam (S. Subramanian)
Studies on acid production potential of some sulphide minerals and bioremediation of acid mine drainage
179 Chandraprabha M.N. (K.A. Natarajan and Jayant M. Modak (Ch.E.) Surface studies on sulphide minerals and Acidithiobacillus bacteria with respect
to biobeneficiation and bioremediation 2008 180 Pradeep Lancy Menezes (Prof. Kishore and Satish V. Kailash (ME)) Role of Surface Texture on Friction and Transfer Layer Formation – A study
using pin-On-Plate Sliding Tester 181 Radhakrishna Paniker M.R (Prof. A.H. Chokshi) Superplastic deformation behaviour of AZ31 Magnesium alloy 182 Murli P (Prof. U. Ramamurty ) Multi- Scale approaches for Understanding Deformation and Fracture
Mechanisms in Amorphous alloys 183 Udaya Bhat K. (Prof. K. Chattopadhyay) Studies on Dissimilar Metal Welding 184 Tripti Biswas Prof. S. Ranganathan Studies of Glass Formation in Al-La-Ni and Mg-TM –RE Alloys with a structure
Mapping Approach 185 Saswata Bhattacharya (Prof. T.A. Abinandanan)
Evolution of Multivariant Microstructures with Anisotropic Misfit A Phase Field Study
186 Aditi Dutta (Prof. U. Ramamurty and Umesh V. Waghmare (JNCASR)) First Principles Study of Structure and Stacking Fault during a summer
monsoon 187 Rejin Raghavan (Prof. U. Ramamurty) Effect of Free-Volume on the Fracture and Fatigue of Amorphous Alloys 2009 188 Gopinath Kakkoprath (ERP) (Prof. U. Ramamurty) Tensile and Low Cycle Fatigue Behavior of a Ni-Base Superalloy 189 L. Rangaraj (ERP) (Prof. Vikram Jayaram) Reactive Hot Pressing of ZrB2 – Based Ultra High Temperature Ceramic
Composites 190 Ashok Kumar Mondal (Prof. Subodh Kumar) Creep, Wear and Corrosion Behaviour of Novel Magnesium Alloys and
Composites
191 Bhaskar Prasad Saha (Prof. Vikram Jayaram) Processomg of Zirconia based honeycombs and Evaluation of thermo
mechanical properties
2010 192 Santonu Ghosh
(Prof. A.H Chokshi) Grain boundary processes in high temperature densification and deformation of nanocrystalline Zirconia
193 Chirantan Ghosh (Dr. Aloke Paul) A Physico-chemical Approach in Binary Solid –State Interdiffusion
194 Indrani Sen (Prof. U Ramamurty) Mechanical Behavior of B-Modified Ti-6A1-4V Alloys
195 M J N V Prasad (Prof. A.H. Chokshi) Microstructural Evolution and Superplasticity in Electrodeposited Nano-Nickel and Alloys
196 Nilesh Prakash Gurao (Prof. Satyam Suwas) Some critical issues pertaining to deformation texture in close-packed metals and alloys: The effect of grain size, strain rate and second phase
197 Somjeet Biswas (Prof. Satyam Suwas) Evolution of Texture and Microstructure during processing of Pure Magnesium and the Magnesium alloy AM30
198 Arindam Paul (Prof. Vikram Jayaram) The Processing, Consolidation the Deformation Behavior of Bulk Amorphous Al2O3-Y2O3 Ceramics
2011 199 P. Rames Narayanan(ERP)
(Prof. Vikram Jayaram) A Study of Crystallographic Texture, Residual Stresses and Mechanical Property Anisotropy in aluminium Alloys for Space Applications
200 Sudarashan (Prof. M.K. Surappa & Prof. A.H. Chokshi) Magnesium Matrix – Nano Ceramic Composites by In situ Pyrolysis of Organic Precursors in a Liquid Melt
201 R. Krishnan(ERP) (Prof. Vikram Jayaram) Investigations on the properties of TiN, NbN thin films and multilayers by Reactive pulsed laser deposition
202 K. Eswara Prasad (Prof. U. Ramamurty) Plastic deformation during indentation of crystalline and amorphous materials
203 Rajdip Mukherjee (Prof. T.A. Abinandanan) Phase Field Modelling of Polycrystalline Materials with Surface
204 Soma Prasad (Prof. Aloke Paul) Interdiffusion Studies in Metal –Silicon Systems
205 Divya V.D (Prof. Aloke Paul & U. Ramamurty) Diffusion studies on systems related to Nickel based syperalloys
2012 206 S. Anandhakumar
(Prof. Ashok M Raichur) Intelligent Microcontainers: Fabrication, Characterization and Tunable Release Properties for Drug Delivery
207 Shibayan Roy (Prof. Satyam Suwas) Role of Boron on the Evolution ofMicro-structure and Texture in Ti-6AL-4V-O. 1B Alloy
208 Anil Chandra A.R
(Prof. M.K. Surappa /Prof. Ashok M. Raichur) Microstructure and mechanical Properties of Consolidated Mgnesium Chips
209 D. Sivaprahasam (ERP) (Prof. K. Chattopadhyay. R. Sundararajan (Orgn) Studies on synthesizing Fe and Fe-Cu nanopowders byInvitational gas condensation process and theirConsolidation characteristics
210 B. Vasanthakumar (Prof. S. Subramanian) Studies on the Isolation and Characterisation of Bioreagents for the Flotation of Sphalerite fromGalena- sphalerite System
211 ChanderShekhar (Prof. K.T. Jacob) Studies on Thermodynamics and Phase Equilibria of Selected Oxide Systems
212 Sanjay Kashyap (Prof. K. Chattopadhyay) (Stuides on Bulk and Multilayer Composites ofNb-Si Alloys
213 Ashish Jain (ERP) Prof. G.S. Gupta & S.Anthonysamy (IGCAR) Characterization of elemental boron synthesized byElectrolytic method
214 Suresh K.S (Prof. Satyam Suwas) Evolution of Texture and Microstructure in Some NiTi Based Alloys and Their Impact on Shape Memory Behavior
2013 215 PrasathBabu R.
(KarthikeyamS. ) Microstructural stability of fully lamellar and Duplex γ TiAl alloys during creep
216 Nisha Verma (Prof. Vikram Jayaram) Mechanism and modeling of contact damage in ZrN-Zr and TiAIN-TiN multilayer hard coatings
217 Dibyendu Chakravarty (ERP) (Atul H Chokshi& A. sundarajan (ARCI) Densification Mechanisms for Spark Plasma Sintering in Alumina and alumina Based systems
218 MithunPalit (ERP) (Prof. K. Chattopadhyay & S. Pandian (DMRL) An investigation on the effect of structural and Microstructure Attributes on magnetostriction of Tb-Dy-Fe and Fe-Ga alloys
219 Md. ZafirAlam (ERP) (Prof. Vikram Jayaram & Dipak K.Das (DRDO) Samir V (DRDO) Tensile Behavior Of Free-Standing Pt-Aluminide(PtA) bond Coats
220 Vyasa VikasaShastry (Prof. U. Ramamurty) Some Processing and Mechanical Behaviour RelatedIssues in Ti-Ni based Shape Memory Alloys
221 Chandan Mondal (Prof. K. Chattopadhyay) Evolution of Texture and its Correlation with Microstructure and Mechanical Property Anisotropy in AA7010 Aluminum Alloy.
222 Swathi S.K. (Prof. Praveen C Ramamurthy) Thiophene Derivative Photovoltaics: Device Frabrication, Optimization and Study of Charge Transport Characteristics
2014 223 Praveena M
(Prof. Vikram Jayaram) Design, Fabrication and Application of In situ Total Internal Reflection (TIR) Raman Tribometer For the Chemical analysis of Tribological Systems
224 Ranjith K (Praveen C Ramamurthy) Design and Synthesis of Band GAP Engineered Conjugated Molecules for Organic electronics
225 Govind (Prof. U. Ramamurty& D Sivakumar (VSSC) Effect of Li Addition on the Plasticity of AZ31 Mg-alloy
226 Rohini Garg
(Rajeev Ranjan) Structural, ferroelectric, piezoelectric andphase transition studies of lead free (Na0.5BiO.5)TiO3 based ceramics
227 ShyamKanta Sinha (Pofr. K. Chattopadhyay , Chandan Srivastava & Prof. S. Sampath (IPC) Synthesis and TransformatinofAUCu Intermetallic Nanoparticles
228 Satyajit Gupta ( Praveen C Ramamurthy & Prof. M. Giridhar, (CH) Development of Hybrid Organic/Inorganic composites as a Barrier Material for organic Electronics
229 Manish Patel (Prof. Vikram Jayaram & V.V. Bhanu Prasad, DMRL Densification, Oxidation, Mechanical and Thermal Behaviour of Zirconium Diboride (ZrB2) and Zirconium Diboride-Silicon Carbide (ZrB2-SiC) Composites
230 Hindol Bandyopadhyay (Prof. S. Karthikeyan ) Effect of Processing and test variables on the deformation characteristics of tantalum
231 Soupitak Pal (Prof. Vikram Jayaram) Microstructural Developments and Mechanical Properties of Electroless Ni-B Coating
232 Nagamani Jaya B (Prof. Vikram Jayaram) Micro-scale fracture testing of graded (Pt,Ni)Al bond coats
233 Rajendra Kurapati (Prof. Ashok M Raichur) Investigation of Graphene Oxide based Multilayered Capsules Films for Drug Delivery and Antimicrobial Applications
234 Sudha J (Prof. Subodh Kumar) Effect of heat treatment and modification on flow and fracture behavior of a newly developed Al-Si based cast alloy
235 Pradipta Ghosh (Prof. Atul H Chokshi) Length Scale effects in deformation of polycrystalline nickel
236 Soumitra Roy (Prof. Aloke Paul) Interdiffusion Study In group IVB, VB and VIB refractory metal-silicon systems
237 Gaurav Singh (Prof. U. Ramamurty) Some Mechanical Properties of Ti-6AI-4V-B alloys
238 Krishna R (Prof. Ashok M Raichur) Design & Fabrication of Bio-responsive Drug Carriers Based on Protamine & Chondroitin Sulphate Biopolymers
239 R.K. SidharadaDevarapalli (Prof. K. Chattopadhyay) Synthesis and Characterization of Intermetallic Coatings by Laser Cladding and Novel Ball Milling Approach
240 Shailesh Kumar (Prof. K. Chattopadhyay) & Prof. Pradip Dutta (ME) Experimental and Numerical Investigation on Friction Welding of Thixocast A356 Aluminium alloy
241 Tomoghna Chakrabarti (Prof. Vikram Jayaram) Study on Reactive Hot Pressing of Zirconium Carbide
242 KirtimanDeo Malviya (Prof. K. Chattopadhyay) Synthesis and study of microstructure evolution in nanoparticles of immiscible alloys by laser ablation under liquid medium
243 Alex Joseph (Prof. S. Subramanian & Prof. Praveen C Ramamurthy) Synthesis and Characterization of Functionalized Electroactive Polymers for Metal ion Sensing
244 Madhavan R (Prof. Satyam Suwas) Role of stacking fault energy on texture evolution in micro and nano-crystalline Nickel –Cobalt alloys
2015 245 Chadra Sekhar Tiwar
(Prof. K. Chattopadhyay) Microstructural, Mechanical and Oxidation behavior of Ni-Al-Zr Ternary Alloy
246 R. Lakshmi Narayan (Prof. Ramamurty U) Fracture and deformation in bulk metallic glasses and composites
247 Dulal Chandra Jana (ERP) (Prof. K. Chattopadhyay & G. Sundarajan (ARC)) Dense and porous Silicon Carbide Ceramics Processed through Aqueous gelcasting and Studies of Densification kinetics
248 Soumya S Bhat (Prof. U. Ramamurty& Umesh V Waghmare) First-Principles Studies of Point Defects and phase transformations in materials
249 Midhun Ben Thomas (Prof. Ashok M. Raichur& Prof. V. Nagaraja (MC) Therapeutic Applications of Biodegradable Chitosan Based Polyelectrolyte Nanocapsules
250 Rama Krushna Sabat (Prof. Satyam Suwas) Evolution of microstructure and texture during severe plastic deformation of a Magnesium – Cerium alloy
251 Rajesh Korla (Prof. Atul H Chokshi) Grain Boundary Sliding in Bicrystals: Experiments and Atomistic Simulations
252 R. Rajasegaran (Prof. Ashok M Raichur) Biodegradable Polyelectrolyte Multilayered Nanocapsules as Carrier for Liver Targeted Gene Delivery in ice and Magnetic Field Enhanced Anticancer Drug Delivery against Drug Resistant Cancers
253 SuklaMondol (Prof. K. Chattopahdyay& (Retired) Prof. Subodh Kumar) Improving high temperature strength of 2219 Al alloy by minor alloying additions
254 Olu Emmanuel Femi (Prof. K. Chattopahdyay& (Retired) Prof. N Ravishankar Microstructure Design and Interfacial Effects on Thermoelectric Properties of Bl-Sb-Te System.
2016 255 Lalitha K.V.
(Prof. Rajeev Ranjan) Correlattion Between Structure, Microstructure and Enhanced piezoresponse around the Morohotropic phase Boundary of Bismuth Scandate – Lead Titanate piezoceramic
256 Sreeranjini P (Prof. Ashok M. Raichur ) Hyaluronic Acid based Biodegradable polyelectrolyte Nanocapsules ad modified Protein Nanoparticles for Targeted Delivery Anticancer Agents
257 Ajay Kumar Kalyani (Prof. Rajeev Ranjan) Electric field Driven Structural Transformations in BaTiO3 andlead zirconatetitanate (PZT) based Piezoceramics
258 Badari Narayana Rao (Prof. Rajeev Ranjan) Influence of electric field on the global and local structure in ferroelectric ceramic Na1/2 Bi1/2TiO3 and its solid solutions withBaTiO3 and K1/2Bi1/2TiO3
259 N. Venkatesh (Prof. Chandan Srivastava) Nanoparticles for Bio-Imaging Magnetic Resonance Imagingand Fluorescence Imaging
260 Divyasree C Prabhakaran (Prof. S. Subramanian) Bioremediation of Chromium: Mechanisms and Biosensing Applications
261 Surendra Kumar M (Prof. K. Chattopadhyay & Prof. Subodh Kumar In Improvement of high temperature strength of Al and Co alloy by L12 type coherent precipitates
262 Dhanalakshmi P (Prof. K. Chattopadhyay & Chandan Srivastava Synthesis and phase transformation studies of AL45Mn55 ferromagnetic Heusler alloy
263 P. Padaikathan(SR) Prof. K. Chattopadhyay Development of HighTemperature Aluminium Alloys through Microstructure Control
264 R.Veerababu (ERP) Prof.S. Karthikeyan & Prof.R. Balamurali Microstructural studies onHigh Cr-Mo secondary hardening ultra- high strength steels
265 Kothai.V Prof.Rajeev Ranjan On the Factors InfluencingThe Stability of Phases in the Multiferroic System BiFeO3-PbTiO3
266 Ashwini N. Mallya Prof.PraveenC Ramamurthy Design and Fabrication ofConjugated Molecule based Resistive sensor for environmental monitoring detectingtargetedAnalytes.
267 SaravananS Prof.PraveenC Ramamurthy Moisture Barrier PolymerNanocomposites for organic device encapsulation
268 ShanoobB Prof.Dipankar Banerjee Effect of Thermomechanicalprocessing on microstructure and microtextureevolution in Titaniumalloys
269 AmitSharma Prof.SatyamSuwas Evolutionof CrystallographicTextureandMicrostructure in SputterDeposited NiMnGaThinFilms andTheirInfluence onMagneticProperties
270 KrishnaYaddanapudiG.R Prof.Dipankar Banerjee EffectProcessParameters on theGrowth N-polarGaNon SapphirebyMOCVD
271 PritiXavier Prof.SuryasarathiBose Mapping thetransientmorphologies and demixingbehavior of Polystyrene/ Poly(vinyl methylether)blend inthepresence ofmultiwall carbonnanotubes
272 VimalnathS Prof.S.Subramanian Bioremediationof Lead fromAqueous Solutionsusing Pseudomonas species- Mechanisms &Biosensor
273 SangeetaSantra Prof.AlokPaul Diffusion-controlledgrowth ofA15-based Nb3Sn
274 K.S. Vinay (MSc) Prof. Dipankar Banerjee Micro structural Evolution of Directionally Solidified No-Al-Re/Ru Alloys
275 Sowmya M.V Prof. S. Subramanian Studies on bioremediation of Cr (VI) using indigenous bacterials strains isolated from chromite mine
276 Arun D Prof. Praveen C Ramamurthy Interface Engineering and Evaluation of Device performance in Organic photovoltaics
277 Khadija Kanwal Khanum Praveen C Ramamurthy Morphological Architecturing of Electroactive Materials inorganic Electronics
278 Sachin Kumar B Prof. Kaushik Chatterjee Engineering bioactive and Multifunctional grapheme polymer composites for bone tissue regeneration
279 Saurabh Dixit Prof. K. Chattopadhyay &Prof. Satish V Kailas Study of Development of Aluminum Based Metal Matrix Composites using Friction Stir Processing
280 Gunjal Vilas Vishnu Prof. K. Cjhattopadhyay& Prof. Dipankar Banerjee Microstructural. Mechanical and Oxidation behavior of Ni-Al-Zr intermetallic Eutectic Alloys
281 George Rapheal Prof. Subodh Kumar Corrosion and wear behavior of plasma electrolytic oxidation and laser surface alloy coatings
2017 282 Suman Sarkar
Prof. K Chattopadhyay (Retired) Prof. Chandan Srivastava Development of New High Strength Alloy in Cu-Fe-Si System through rapid solidification
283 Atanu Chaudhuri Prof. Satyam Suwas Hot deformation behaviour of some refractory metals and alloys
284 Joshi Chaitanya Amol Prof. T A Abhinandanan Destabilisation and failure of cylindrical nanopores: A phase field study
285 Maya Kini K Prof. A H Chokshi Interfacial processes in densification of cubic zirconia
286 Mithipati Siva Bhaskar Prof. T A.Abhinandanan Precipitate Growth and Coarsening in Ternary Alloys
287 Piyush Vijay Jagtap Prof. Praveen Kumar Whisker Growth from Electrodeposited Sn Coatings
288 HimalayBasumatary (ERP) Prof. Rajeev Ranjan J.AroutChelvane (Orgn) Structure,Microstructure and Magnetic Properties of Fe-Ga and R-Fe based Magnetostrictive Thin Films
289 AllwinEbinesar J.S Prof. Subramanian S Bioremediation of zinc using Pseudomonas species. Mechanistic studies and biosensing applications
290 Adrash K Hegde Prof. Vikram Jayaram Dry sliding wear of Saffil short fibre – reinforced AZ91D Mg –alloy composite
291 V. Ezhilselvi Prof. Subramanian S Development of corrosion protective coating systems for AZ31B magnesium alloy
292 Pawar Shital Patangrao Prof. Suryasarathi Bose EMI Shielding Materials Derived from Pc/SAN Blends Containing Engineered Nanoparticles
293 Suryawanshi Jyoti Balaji Prof. U. Ramamurty Mechanical and Corrosion Properties of Selective Laser melted Alloys
294 Sumanth G Prof. Vikram Jayaram Effect of humidity and temperature on wear of TiN and TiAIN coatings
295 MeghaSahu Prof. Ashok M Raichur Nanostructured toughening agents for tetrafunctional epoxy composites
2018
296 Agrawal Priyanka Kantibhai Prof. Dipankar Banerjee Dynamic Strain Aging and Creep in near-a ti Alloy, IMI834
297 Varun Arvind Baheti Prof. Aloke Paul & Praveen Kumar Diffusion – Controlled Growth of phases in Metal-tin Systems Related to Microelectronics Packaging
298 ArkaLahiri Prof. T.A. Abhinandanan Theoretical and numerical study of microstructure formation in multi-component alloys
299 Dipak Kumar Khatua Prof. Rajeev Ranjan Insights into the influence of electric fled on the Structural evolution and its correlation with the Properties in the lead-based BiSc03-pbTio3 and the lead-free Na0.5 bi0.5 ti03 based Piezoceramics
300 Y. Raghupathy Prof. Chandan Srivastava Nano surface Modification for anti-corrosive and Anti-Biofouling applications
301 AparajitaPramanik Prof. Karthikeyan S Effect of copper on strength of Super304H austenitic stainless steel
302 Udayagiri Sai Babu Prof. Karthikeyan S Atomistic Simulation of Grain Boundary Effects on Cascade Damage in Vanadium
303 Venkata Vamsi Koruprolu Prof. S. Karthikeyan S Planar Fault Energies in L2 Compounds
304 Kaustubh Venkatraman Prof. Vikram Jayaram Testing Methodologies for Porbing Site Specific Fatigue Response of Graded Coatings
305 Senthilkumar S (ERP) Prof. Vikram Jayaram Studies on Internal Reforming Solid Oxide Fuel Cell
306 SumitBahl Prof. Kaushik Chatterjee &Prof. Satyam Suwas Nanoscale surface engineering of metallic biomaterials for enhancement of mechanical and biological responses
307 Gopakumar P (ERP) Prof. Vikram Jayaram &Krish Sridhar (Orgn) Influence of surface topography and tribosystem on reciprocating friction in sparsely lubricated contacts
308 RajibKalsar Prof. Satyam Suwas Evolution of Microstructure and Texture in Manganese Steels
309 Sai Rama Krishna Meka Prof. Kaushik Chatterjee Engineering Bioactive Polymer / Ceramic Composite Nanofibrous Scaffolds for Bone Tissue Regeneration
310 Deepak Sharma Prof. Praveen Kumar Synergistic Effect of Electromagnetic Forces on the Failure of pre-Cracked Thin Metallic Conductors