LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY

LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY THE 115TH STANDARDS APPROVAL COMMITTEE MEETING ON 6TH

JULY 2017

of 30

CHEMICAL DEPARTMENT CONFIRMATIONS

1. KS ISO 3585:1998 Kenya Standard — Borocilicate glass 3.3 — Properties 2. KS ISO 3819:1985 Kenya Standard — Laboratory glassware — Beakers 3. KS ISO 383:1976 Kenya Standard — Laboratory glassware — Interchangeable conical

ground joints 4. KS ISO 384:1978 Kenya Standard — Laboratory glassware — Principles of design and

construction of volumetric glassware 5. KS ISO 385-2:1984 Kenya Standard — Laboratory glassware — Burettes Part 2: Burettes for

which no waiting time is specified. 6. KS ISO 385-2:1984 Kenya Standard — Laboratory glassware — Burettes Part 2: Burettes for

which no waiting time is specified 7. KS ISO 385-3:1984 Kenya Standard — Laboratory glassware — Burettes Part 3: Burettes for

which a waiting time of 30 s is specified 8. KS ISO 4785:1997 Kenya Standard — Laboratory glassware — Straight-bore glass

stopcocks for general purposes 9. KS ISO 4791-1:1985 Kenya Standard — Laboratory glassware apparatus — Vocabulary

relating to apparatus made essentially from glass, porcelain or vitreous silica Part 1: Names for items of apparatus

10. KS ISO 4794:1982 Kenya Standard — Laboratory glassware — Methods for assessing the chemical resistance of enamels used for colour coding and colour marking

11. KS ISO 4796-2:2000 Kenya Standard — Laboratory glassware — Bottles Part 2:Conical neck bottles

12. KS ISO 4797:2004 Kenya Standard — Laboratory glassware — Boiling flasks with conical ground joints

13. KS ISO 4798:1997 Kenya Standard — Laboratory glassware — Filter funnels 14. Laboratory glassware — Separating funnels and dropping funnels 15. KS ISO 4800:1998 Kenya Standard — Laboratory glassware — Separating funnels and

dropping funnels 16. KS ISO 4799:1978 Kenya Standard — Laboratory glassware — Condensers 17. KS ISO 4802-1:1988 Kenya Standard — Laboratory glassware — Hydrolytic resistance of the

interior surfaces glass containers 18. KS ISO 4802-2:1988 Kenya Standard — Laboratory glassware — Hydrolytic resistance of

the interior surface of glass containers Part 2: Determination by flame spectrometry and classification

19. KS ISO 4803:1978 Kenya Standard — Laboratory glassware — Borosilicate glass tubing 20. KS ISO 6486-2:1999 Kenya Standard — Ceramic ware, glass-ceramic ware and glass

dinnerware in contact with food — Release of lead and cadmium Part 2: Permissible limits. 21. KS ISO 6556:1981 Kenya Standard — Laboratory glassware — Filter flasks 22. KS ISO 7056:1981 Kenya Standard — Plastic laboratory ware — Beakers 23. KS ISO 7057:1981 Kenya Standard — Plastics laboratory ware — Filter funnels 24. KS ISO 7086-1:2000 Kenya Standard — Glass hollowware in contact with food — Release of

lead and cadmium Part 1: Test method 25. KS ISO 7086-2:2000 Kenya Standard — Glass hollowware in contact with food — Release of

lead and cadmium Part 2: Permissible limits 26. KS ISO 718:1990 Kenya Standard — Laboratory glassware — Thermal shock and thermal

shock endurance test methods 27. KS ISO 719:1985 Kenya Standard — Glass — Hydrolytic resistance of glass grains at 98 —

Method of test and classification 28. KS ISO 7713:1985 Kenya Standard — Laboratory glassware — Disposable serological

pipettes 29. KS 649-1:1989 Kenya Standard — Specification for toughened automobile windscreens Part

1: Specification for toughed windscreens 30. KS 649-2:1989 Kenya Standard — Specification for automobile windscreens Part 2:

Laminated automobile windscreens 31. KS 353:1985 Kenya Standard — Specification for crown finish glass bottles


JULY 2017

of 30

32. KS 378:1982 Kenya Standard — Glossary of terms relating to glass industry 33. KS 513:1985 Kenya Standard — Specification for glass tableware 34. KS ISO 1772:1975 Kenya Standard — Laboratory crucibles in porcelain and silica 35. KS ISO 1773:1997 Kenya Standard — Laboratory glassware — Narrow necked boiling flasks 36. KS ISO 1775:1975 Kenya Standard — Porcelain laboratory apparatus — Requirements and

methods of test 37. KS 649-1:1989 Kenya Standard — Specification for toughened automobile windscreens Part

1: Specification for toughed windscreens 38. KS 649-2-1989 Kenya Standard — Specification for automobile windscreens Part 2:

Laminated automobile windscreens 39. KS ISO 8391-2:1986 Kenya Standard — Ceramic cookware in contact with food — Release

of lead and cadmium Part 2: Permissible limits 40. KS ISO 8391-1:1986 Kenya Standard — Ceramic cookware in contact with food — Release

of lead and cadmium Part 1: Method of test 41. KS ISO 6486-2:1999 Kenya Standard — Ceramic ware, glass-ceramic ware and glass

dinnerware in contact with food — Release of lead and cadmium Part 2: Permissible limits 42. KS ISO 10545-10:1995 Kenya Standard — Specifications for ceramic tiles Part 10:

Determination of moisture expansion 43. KS ISO 10545-11:1994 Kenya Standard — Specifications for ceramic tiles Part 11:

Determination of crazing resistance for glazed tiles 44. KS ISO 10545-12:1995 Kenya Standard — Specifications for ceramic tiles Part 12:

Determination of frost resistance 45. KS ISO 10545-13:1995 Kenya Standard — Specifications for ceramic tiles Part 13:

Determination of chemical resistance 46. KS ISO 10545-14:1995 Kenya Standard — Specifications for ceramic tiles Part 14:

Determination of resistance to stains 47. KS ISO 10545-2:1995 Kenya Standard — Specifications for ceramic tiles Part 2:

Determination of dimensions and surface quality 48. KS ISO 10545-4:1994 Kenya Standard — Specifications for ceramic tiles Part 4:

Determination of modulus of rupture and breaking strength 49. KS ISO 10545-5:1996 Kenya Standard — Specifications for ceramic tiles Part 5:

Determination of impact resistance by measurement of coefficient of restitution 50. KS ISO 10545-6:1995 Kenya Standard — Specifications for ceramic tiles Part 6:

Determination of resistance to deep abrasion for unglazed tiles 51. KS ISO 10545-7:1996 Kenya Standard — Specifications for ceramic tiles Part 7:

Determination of resistance to surface abrasion for glazed tiles 52. KS ISO 10545-8:1994 Kenya Standard — Specifications for ceramic tiles Part 8:

Determination of linear thermal expansion 53. KS ISO 10545-9:1994 Kenya Standard — Specifications for ceramic tiles Part 9:

Determination of resistance to thermal shock 54. KS 1024-1:2010 Kenya Standard — Vitreous china water closet pans — Specification Part 1:

Vitreous china washdown water closet pans 55. KS 1024-2:2010 Kenya Standard — Vitreous china water closet pans — Specification Part 2:

Vitreous china squatting washdown water closet pans 56. KS ISO 14644-4:2001 Kenya Standard — Clean rooms and associated controlled

environments — Biocontamination Control Part 4: Design, construction and start-up 57. KS ISO 14644-5:2004 Kenya Standard — Cleanrooms and associated controlled

environments Part 5: Operations 58. KS ISO 14644-6:2007 Kenya Standard — Cleanrooms and associated controlled

environments - Part 6: Vocabulary. 59. KS ISO 14644-7:2004 Kenya Standard — Cleanrooms and associated controlled

environments Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

60. KS ISO 14698-1:2003 Kenya Standard — Clean rooms and associated controlled environments- Biocontamination control Part 1: General principles and methods

61. KS ISO 14698-2:2003 Kenya Standard — Cleanrooms and associated controlled environments- Biocontamination Control Part 2: Evaluation and interpretation of biocontamination data


JULY 2017

of 30

62. KS ISO 14698-2:2003 Cor 1 Kenya Standard — Classrooms and associated controlled environments- Biocontamination Control Part 2: Evaluation and interpretation of biocontamination

63. KS IEC 60068-1:1998 Kenya Standard — Environmental testing Part 1: General and guidance

64. KS IEC 60068-2-21:2006 Kenya Standard — Environmental testing Part 2-21: Tests — Test U: Robustness of terminations and integral mounting devices

65. KS 242:1980 Kenya Standard — Specification for sulphuric acid for use in lead-acid batteries. 66. KS ISO 6353-3:1987 Reagents for chemical analysis Part 3: Specifications 67. KS 1406-1:1997 Kenya Standard — Specification for carbaryl Part 1: Technical grade 68. KS 1408-1:1998 Kenya Standard — Specification for technical grade Part 1: Dimethoate 69. KS 2266-1:2011 Kenya Standard — Argon – Specification 70. KS 2266-2:2011 Kenya Standard — Argon-Specification-Part 2:High-purity argon 71. KS 2266-3:2011 Kenya Standard — Specification for Argon 72. KS 2267-1:2011 Kenya Standard — Helium-Specification. Part 1:Ultra high purity helium 73. KS 2267-2:2011 Kenya Standard — Helium-Specification. Part 2:High purity helium 74. KS 2268:2011 Kenya Standard — Specification of Ethylene Oxide 75. KS 2340-1: 2011 Kenya Standard — Hydrogen- Specification Part 1: Industrial hydrogen 76. KS 2340-2:2011 Kenya Standard — Hydrogen- specification part 2:high purity hydrogen 77. KS 375:2010 Kenya Standard — Industrial liquid carbon dioxide - Specification 78. KS 648:2010 Kenya Standard — Industrial acetylene gas - Specification (Second Edition). 79. KS 2341:2011 Kenya Standard — Industrial Liquid chlorine- Specification 80. KS 2342:2011 Kenya Standard — Liquid Sulphur dioxide - specification - Part 2: Refrigeration

grade liquid Sulphur dioxide 81. KS 2342-1:2011 Kenya Standard — Liquid Sulphur dioxide - Specification - Part 1 :Technical

grade liquid Sulphur dioxide 82. KS 1222 Specification for ink paste - Black (stencil, duplicating-machine) 83. KS 1807 Numbering ink - Specification 84. KS 518 Fountain pen inks - Specification 85. KS 1936-1 Black letterpress ink - Specification - Part 1: Black letterpress ink for general

purposes. 86. KS 1934 Specification for Black Web Offset Ink 87. KS 1830 Black metal stamp ink - Specification

WITHDRAWALS 88. KS 400:1983 Specification for acetic acid, To be replaced by KS 400:2017 89. KS 2324 PARTS 1 TO 8 To be replaced by KS 2324:2017 90. KS 1794:2007 Kenya Standard — Polyethylene and polypropylene bags for general purposes

— Specification. The Ministry of Environment and Natural resources through its CS issued a Gazette notice No. 2356, that banned the use of plastic carrier bags and flat bags. The effective date of the ban is 28th August 2017. IN order not to have contradicting documents it is imperative that the process of withdrawal of the standard covering the banned products be initiated. The TC on plastics met on 9th June 2017 and agreed to have the standard withdrawn according to KEBS procedures. In the event that the ban is somehow lifted before August 28th 2017, the committee agreed to proceed with systematic review of the standard that was last confirmed in 2013.

ELECTROTECHNICAL DEPARTMENT CONFIRMATIONS

91. KS 282:1988 Kenya Standard — Specification for element for electric water heaters for permanent installation in household cylinders or tanks

92. KS ISO IEC TR 8802-1:2001 Kenya Standard — Information technology - Specification for telecommunications and information exchange between systems - Specific requirements for local and metropolitan area networks - Part 1: Overview of local area

93. KS ISO IEC 10040:1998 Kenya Standard — Specification for open systems interconnection - Systems management overview.


JULY 2017

of 30

94. KS ISO IEC 13236:1998 Kenya Standard — Information technology - Specification for quality of service - Framework.

95. KS ISO IEC 15018:2004 Kenya Standard — Information technology - Generic cabling for homes.

96. KS ISO IEC 18010:2002 Kenya Standard — Information Technology - Pathways and spaces for customer premises cabling.

97. KS ISO IEC TR 14763-2:2012+AMD1:2015 Kenya Standard — Information technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation.

98. KS ISO IEC TR 24750:2007 Kenya Standard — Information technology - Assessment and mitigation of installed balanced cabling channels in order to support 10GBASE-T.

99. KS ISO IEC TR 29106:2007 Kenya Standard — Kenya Standard — Information technology - Generic cabling - Introduction to the MICE environmental classification.

100. KS ISO IEC 8802-2:1998 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 2: Logical link control (LLC).

101. KS ISO IEC 9314-13:1998 Kenya Standard — Information technology - Fibre distributed data interface (FDDI) - Part 13: Conformance Test Protocol Implementation - Conformance Statement (CT-PICS) Proforma.

102. KS ISO IEC 9314-20:2001 Kenya Standard — Information technology - Fibre distributed data interface (FDDI) - Part 20: Abstract test suite for FDDI physical medium dependent conformance testing (PMD-ATS).

103. KS ISO IEC 9314-21:2000 Kenya Standard — Information technology - Fibre distributed data interface (FDDI) - Part 21: Abstract test suite for FDDI physical layer protocol conformance testing (PHY ATS).

104. KS ISO IEC 9314-25:1998 Kenya Standard — Information technology - Fibre distributed data interface (FDDI) - Part 25: Abstract test suite for FDDI - Station Management conformance testing (FDDI-SMT-ATS).

105. KS ISO IEC 14763-1:1999 Kenya Standard — Information technology - Implementation and operation of customer premises cabling - Part 1: Administration.

106. KS ISO IEC 15802-1:1995 Kenya Standard — Information technology - Telecommunications exchange between systems - Local area and metropolitan area networks - Part 1: Medium access control (MAC) service definition.

107. KS ISO IEC 15802-2:1995 Kenya Standard — Information technology - Telecommunications exchange between systems - Local area and metropolitan area networks - Part 2: LAN / MAN management.

108. KS ISO IEC 15802-3:1998 Kenya Standard — Information technology - Telecommunications exchange between systems - Local area and metropolitan area networks - Part 3: Medium access control (MAC) bridges.

109. KS ISO IEC 24702:2006 Kenya Standard — Information technology - Generic cabling - Industrial premises.

110. KS ISO IEC 7498-4:2001 Kenya Standard — Information technology - Specification for open systems interconnection - Basic reference model Part 4: management framework.

111. KS ISO IEC 8802-5:1998 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 5: Token ring access method and physical layer specifications

112. KS ISO IEC 9595:2001 Kenya Standard — Specification for open systems interconnection - Common management information service.

113. KS ISO IEC10040:2001 Kenya Standard — Specification for open systems interconnection - Systems management overview.

114. KS ISO IEC13236:1998 Kenya Standard — Information technology - Specification for quality of service - Framework.

115. KS ISO TR 9547:1998 Kenya Standard — Programming language processors - Test methods - Guidelines for their development and acceptability.

116. KS ISO/IEC 13818-3:1998 Kenya Standard — Information technology Generic coding of moving pictures and associated audio information Part 3: Audio

117. KS ISO/IEC 13818-7:2006 Information technology Generic coding of moving pictures and associated audio information Part 7: Advanced Audio Coding (AAC)


JULY 2017

of 30

118. KS ISO IEC 6523-1:1998 Kenya Standard — Information technology - Structure for the identification of organizations and organization parts - Part 1: Identification of organization identification scheme.

119. KS ISO IEC 6523-2:2001 Kenya Standard — Information technology - Structure for the identification of organizations and organization parts - Part 2: Registration of organization identification scheme.

120. KS ISO IEC 7498-1:1994 Kenya Standard — Specification for open systems interconnection - Basic reference model - Part 1: The basic model.

121. KS ISO IEC 7498-2:1989 Kenya Standard — Specification for open systems interconnection - Basic reference model - Part 2: Security architecture.

122. KS ISO IEC 7498-3:1997 Kenya Standard — Specification for open systems interconnection - Basic reference model - Part 3: Naming and addressing.

123. KS ISO IEC 7498-4:1989 Kenya Standard — Information technology - Specification for open systems interconnection - Basic reference model - part 4; management framework.

124. KS ISO 19101:2002 Kenya Standard — Geographic information - Reference model. 125. KS ISO 19105:2000 Kenya Standard — Geographic information - Conformance and testing. 126. KS ISO 19106:2004 Kenya Standard — Geographic information - Profiles. 127. KS ISO 19107:2003 Kenya Standard — Geographic information - Spatial schema. 128. KS ISO 19108:2002 Kenya Standard — Geographic information - Temporal schema. 129. KS ISO 19109:2005 Kenya Standard — Geographic information - Rules for application

schema. 130. KS ISO 19110:2005 Kenya Standard — Geographic information - Methodology for feature

cataloguing. 131. KS ISO 19111:2003 Kenya Standard — Geographic information - Spatial referencing by

coordinates. 132. KS ISO 19112:2003 Kenya Standard — Geographic information - Spatial referencing by

geographic identifiers. 133. KS ISO 19113:2002 Kenya Standard — Geographic information - Quality principles. 134. KS ISO 19114:2003 Kenya Standard — Geographic information - Quality evaluation

procedures. 135. KS ISO 19115:2003 Kenya Standard — Geographic information - Metadata. 136. KS ISO 19116:2004 Kenya Standard — Geographic information - Positioning services. 137. KS ISO 19117:2005 Kenya Standard — Geographic information - Portrayal. 138. KS IEC 61865:2001 Kenya Standard — Overhead lines - Calculation of the electrical

component of distance between live parts and obstacles- Method of calculation 139. KS 1868:2007 Kenya Standard — Overhead power lines - Loading tests on structures 140. KS 1069:1991 Kenya Standard — Specification for PVC covered conductors for overhead

power lines 141. KS 1637:2001 Kenya Standard — Specification for welding cables 142. KS 1625:2001 Kenya Standard — Specification for voltage bands for electrical installations

of buildings 143. KS IEC 61643-1:2002 Kenya Standard — Surge protective devices connected to low-voltage

power distribution systems - Part 1: Performance requirements and testing methods 144. KS 1827:2007 Kenya Standard — Voltage characteristics of electricity supplied by public

distribution systems 145. KS ISO 4190-5:1987 Kenya Standard — Lifts and service lifts (USA: Elevators and

Dumbwaiters) Part 5: Control devices signals and additional fittings 146. KS ISO 4190-6:1984 Kenya Standard — Lifts and service lifts (USA: Elevators and

Dumbwaiters) - Part 6: Passenger lifts to be installed in residential buildings - Planning and selection

147. KS ISO 4190-2:2001 Kenya Standard — Lifts (US: Elevator) installation - Part 2: Class IV lifts

148. KS ISO 4190-1:1999 Kenya Standard — Lifts (USA: Elevator) Installation - Part 1: Class I, II, III and IV lifts

149. KS 2169-1:2010 Kenya Standard — Safety rules for the construction and installation of lifts - Part 1: Electric lifts

150. KS 2291-1:2011 Kenya Standard — Safety escalators and moving walks part 1:construction and installation


JULY 2017

of 30

151. KS ISO 4190-3:1982 Kenya Standard — Passenger lifts installations - Part 3: Service lifts class V

152. KS ISO 4190-1:1999 Kenya Standard — Lifts (USA: Elevator) Installation - Part 1: Class I, II, III and IV lifts

153. KS ISO 4190-2:2001 Kenya Standard — Lifts (US: Elevator) installation - Part 2: Class IV lifts

154. KS ISO 4190-6:1984 Kenya Standard — Lifts and service lifts (USA: Elevators and Dumbwaiters) - Part 6: Passenger lifts to be installed in residential buildings - Planning and selection

155. KS ISO 4190-5:1987 Kenya Standard — Lifts and service lifts (USA: Elevators and Dumbwaiters) - Part 5: Control devices signals and additional fittings

156. KS 1601:2000 Kenya Standard — Specification for welding power sources for industrial and professional use

157. KS 1859-3:2010 Kenya Standard — Electrical power transmission and distribution- High-voltage operating regulations - Part 3: Model regulations-Recommended model regulations relating to power systems for operating, access control and supervision of systems that exceed 1000 v, distribution of electricity

158. KS 1876-1:2010 Kenya Standard — Electrical power transmission and distribution - Overhead power lines for conditions prevailing in Kenya. Part 1: Code of practice

159. KS IEC 61557-1:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 1: General requirements

160. KS IEC 61557-2:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance

161. KS IEC 61557-7:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 7: Phase sequence

162. KS IEC 61557-9:1999 Kenya Standard — Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems

163. KS IEC 61557-10:2000 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 10: Combined measuring equipment

164. KS IEC 61557-3:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 3: Loop impedance

165. KS IEC 61557-4:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 4: Resistance of earth connection and equipotential bonding

166. KS IEC 61557-5:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 5: Resistance to earth

167. KS IEC 61557-6:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Residual current devices (RCD)

168. KS IEC 61557-8:1997 Kenya Standard — Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices

169. KS 1587:2007 Kenya Standard — National electrical safety code 170. KS IEC 61936-1:2002 Kenya Standard — Power installations exceeding 1 kV a.c - Part 1:

Common rules 171. KS IEC 60034-3:2007 Kenya Standard — Rotating electrical machines Part 3: Specific

requirements for synchronous generators driven by steam turbines or combustion gas turbines

172. KS 470:1982 Kenya Standard — Safety requirements for electrical equipment for room air-conditioners

173. KS 1187:1993 Kenya Standard — Specification for metallic clips for electrical wiring


JULY 2017

of 30

174. KS 1625:2001 Kenya Standard — Specification for voltage bands for electrical installations of buildings

175. KS 1827:2007 Kenya Standard — Voltage characteristics of electricity supplied by public distribution systems

176. KS 1113-1:1993 Kenya Standard — Specification for spun yarns Part 1: Cotton yarns 177. KS 1113-3:1993 Kenya Standard — Specification for spun yarns Part 3:Polyester/Cellulosic

yarns 178. KS 1113-4:1996 Kenya Standard — Specification for spun yarns Part 4:Polyester/wool

blended yarns 179. KS 1142:1992 Kenya Standard — Specification for polyolefin agricultural twines 180. KS 1143:1993 Kenya Standard — Specification for strand polyester multifilament ropes 181. KS 1129-1:1997 Test method for fishing nets, Part 1:Determination of change in length after

water immersion 182. KS 630-1:1987 Kenya Standard — Methods of test for knitted fabrics Part 1: Method for

determination of dimensions and dimensional stability of knitted fabrics 183. KS ISO 11612:1998 Kenya Standard — Glossary of terms relating to fishing nets Part 1

Designation of netting yarns 184. KS ISO 15025:2000 Kenya Standard — Clothing for protection against heat and flame 185. KS ISO 15383:2001 Kenya Standard — Protective clothing-Protection against heat and

flame - Method of test for flame spread 186. KS 1120:1992 Kenya Standard — Specification for doubling bobbins 187. KS 1128:1995 Kenya Standard — Specification for wicks for non-pressure stoves 188. KS 1145:1992 Kenya Standard — Specification for three-strand (Hawser Laid) and fight-

strand (Plaited) polypropylene monofilament or film ropes 189. KS 1075-1:1991 Kenya Standard — Glossary of terms relating to fishing nets - Part 1:

Designation of netting yarns in the Tex system 190. KS 1077-14:1996 Kenya Standard — Method of test for coated fabrics - Part 14:

Determination of resistance to penetration by water 191. KS 1144:1993 Kenya Standard — Specification for three strand polyamide multifilament

ropes 192. KS ISO 12956:1999 Kenya Standard — Geotextiles and geotextile-related products -

Determination of the characteristic opening size 193. KS ISO 13427:1998 Kenya Standard — Geotextiles and geotextile-related products -

Abrasion damage simulation (sliding block test) 194. KS ISO 13431:1999 Kenya Standard — Geotextiles and geotextile-related products -

Determination of tensile creep and creep rupture behaviour 195. KS ISO 13437:1998 Kenya Standard — Geotextiles and geotextile-related products -

Method for installing and extracting samples in soil, and testing specimens in laboratory 196. KS ISO 9863-2:1996 Kenya Standard — Geotextiles and geotextile-related products -

Determination of thickness at specified pressures - Part 2: Procedure for determination of thickness of single layers of muitilayer products

197. KS ISO TR 12960:1998 Kenya Standard — Geotextiles and geotextile-related products - Screening test method for determining the resistance to liquids

198. KS 1149:1995 Kenya Standard — Specification for optical performance of high-visibility garments and accessories for use on the highway

199. KS 1234:1992 Kenya Standard — Specification for bedspreads 200. KS 1034:1994 Kenya Standard — Specification for kikoi 201. KS 1117:1991 Kenya Standard — Method for assessing the appearance of seams on

durable press products after domestic washing and drying 202. KS 1188:2002 Kenya Standard — Guide to garment quality and relevant Kenya standards 203. KS 1402: 1997 Kenya Standard — Specification for size designation for headwear 204. KS 1403:1997 Kenya Standard — Specification for size designation for panty hose 205. KS 1466:2006 Kenya Standard — Donkey jackets - Specification 206. KS 1469:2005 Kenya Standard — Specification for work wear and career wear 207. KS 1488:2005 Kenya Standard — Life jackets - Specification 208. KS 1713:2005 Kenya Standard — Holes and shanks for buttons - Specification 209. KS 1949:2005 Kenya Standard — Specification for brassieres 210. KS 207-1:1979 Kenya Standard — Glossary of textile terms pertaining to defects in fabrics


JULY 2017

of 30

211. KS 267-1:1983 Kenya Standard — Conversion tables and methods of designation of textile yarns Part 1: Method of designation of yarns

212. KS 410:2001 Kenya Standard — Specification for size designation of clothes and body-measurement procedure

213. KS 411:1983 Kenya Standard — Specification for size designation for women's and girls' clothing

214. KS 412:2002 Kenya Standard — Specification for size designation for men's and boys' ready to wear clothing

215. KS 413:1984 Kenya Standard — Specification for size designation of clothes for infants 216. KS 504-1:1983 Kenya Standard — Specification for men's and boys' shirts - Part 1: Making

up requirements 217. KS 504-2:1985 Kenya Standard — Specification for men's and boys' shirts - Part 2:

Measurements for shirts 218. KS 505:1995 Kenya Standard — Specification for women's and girls' outerwear garments 219. KS 540:1985 Kenya Standard — Specification for pillow cases 220. KS 559-2:1985 Kenya Standard — Specification for men's and boys' trousers - Part 2:

Measurements for trousers 221. KS 560-1:1984 Kenya Standard — Specification of boys' and men's jackets and coats - Part

1: Making-up requirements for unlined jackets and coats 222. KS 560-2:1993 Kenya Standard — Specification of boys' and men's jackets and coats - Part

2: Making up requirements for lined jackets and coats 223. KS 585:1985 Kenya Standard — Specification for zippers 224. KS 598:1990 Kenya Standard — Specification for ladies' cardigans 225. KS 599:2003 Kenya Standard — Specification for laces for footwear 226. KS 640-1:1989 Kenya Standard — Specification for men's and boys' pyjamas - Part 1:

Making up requirements for pyjamas 227. KS 640-2:1986 Kenya Standard — Specification for men's and boys' pyjamas - Part 2:

Measurements for pyjamas 228. KS 688:1986 Kenya Standard — Glossary of terms used by the clothing industry 229. KS 836-1:1991 Kenya Standard — Classification and terminology of stitches and seams -

Part 1: Types 230. KS 836-2:1993 Kenya Standard — Classification and Terminology of stitches and seams -

Part 2: Seam types 231. KS 687-1:1987 Kenya Standard — Specification for men's uniforms - Part 1: Uniform

trousers 232. KS 687-3:1998 Kenya Standard — Specification for uniforms - Part 3: Uniforms shirts 233. KS 414-1:1982 Kenya Standard — Specification for school wear for boys and girls - Part 1:

Requirements for making school wear WITHDRAWALS

234. KS ISO IEC 8802-11:1999 Kenya Standard — Wireless LAN Medium Access Control (MAC) nd information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 11 To be replaced by KS ISO/IEC/IEEE 8802-11:2012

235. KS ISO IEC 8802-12:1998 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 12: Demand-priority access method, physical layer No replacement Obsolete technology not suitable for existing applications

236. KS ISO IEC 14763-3:2000 Kenya Standard — Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling To be replaced by KS ISO IEC 14763-3:2014

237. KS ISO IEC 15802-4:1994 Kenya Standard — Information technology - Telecommunications exchange between systems - Local area and metropolitan area networks - Part 4: System load protocol No replacement. Obsolete technology not suitable for existing applications

238. KS ISO IEC 15802-5:1998 Kenya Standard — Information technology - Telecommunications exchange between systems - Local area and metropolitan area networks - Part 5: Remote media access control (MAC) bridging No replacement. Obsolete technology not suitable for existing applications


JULY 2017

of 30

239. KS ISO IEC 14598-1:1999 Kenya Standard — Information technology - Software product evaluation - Part 1: General overview To be replaced by KS ISO/IEC 25040:2011.

240. KS ISO IECTR 9294:1990 Kenya Standard — Information technology - Guidelines for the management of software documentation To be replaced by KS ISO/IEC TR 9294:2005

241. KS ISO IEC TR 10176:1998 Kenya Standard — Information technology - Guidelines for the preparation of programming language standards To be replaced by KS ISO IEC TR 10176: 2007

242. KS ISO IEC14598-1:1999 Kenya Standard — Information technology - Software product evaluation - Part 1: General overview To be replaced by KS ISO/IEC 25040:2011

243. KS ISO IEC14598-2:2000 Kenya Standard — Software engineering - Product evaluation - Part 2: Planning and management To be replaced by KS ISO/IEC 25001:2014

244. KS ISO IEC14598-3:2000 Kenya Standard — Software engineering - Product evaluation - Part 3: Process for developers To be replaced by KS ISO/IEC 25041:2012

245. KS ISO IEC14598-4:1999 Kenya Standard — Software engineering - Product evaluation - Part 4: Process for acquirers To be replaced by KS ISO/IEC 25041:2012

246. KS ISO IEC 26300:2006 Kenya Standard — Information technology - Open Document Format for Office Applications (OpenDocument) v1.0 To be replaced by KS ISO IEC 26300:2015

247. KS ISO IEC 9075-3:1995 Kenya Standard — Information technology - Database language - SQL - Part 3: Call-level interface (SQL/CLI) To be replaced by KS ISO/IEC 9075-3:2016

248. KS ISO IEC 9075-4:1996 Kenya Standard — Information technology - Database language - SQL - Part 4: Persistent stored modules (SQL/PSM) To be replaced by KS ISO IEC 9075-4:2016

249. KS ISO IEC 11404:1996 Kenya Standard — Information technology - Programming languages, their environments and system software interfaces - Language-independent datatypes To be replaced by KS ISO/IEC/IEEE 26511:2011

250. KS ISO IEC/TR 9294:1990 Kenya Standard — Information technology - Guidelines for the management of software documentation To be replaced by KS ISO/IEC TR 9294:2005

251. KS ISO IEC 8802-3:2000 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications To be replaced by KS ISO/IEC/IEEE 8802-3:2014

252. KS ISO IEC 8802-4:1990 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 4: Token-passing bus access method and physic No replacement. Obsolete technology not suitable for existing applications

253. KS ISO IEC 8802-6:1994 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 6: Distributed Queue Dual Bus (DQDB) access method and physical layer specifications No replacement. Obsolete technology not suitable for existing applications

254. KS ISO IEC 8802-7:1991 Kenya Standard — Information technology - Telecommunications and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 7: Slotted ring access method and physical layer No replacement. Obsolete technology not suitable for existing applications

255. KS ISO IEC 8802-9:1998 Kenya Standard — Integrated service (IS) LAN interface and information exchange between systems - Local and metropolitan Area Networks - Specific requirements - Part 9 No replacement. Obsolete technology not suitable for existing applications

256. KS ISO IEC 12119:1994 Kenya Standard — Information Technology - Software packages - Quality requirements and testing KS ISO/IEC 25051:2006

257. KS EAS 388-2:2005 Kenya Standard — High-voltage fuses - Part 2: Expulsion fuses To be replaced by KS IEC 60282-1:2009 and KS IEC 60282-2:2008

258. KS IEC 60670-1:2002 Kenya Standard — Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements To be replaced by KS IEC 60670-1:2015


JULY 2017

of 30

259. KS IEC 62056-31:1999 Kenya Standard — Electricity metering - Data exchange for meter reading, tariff and load control - Part 31: Use of local area networks on twisted pair with carrier signalling To be replaced by KS IEC 62056-3-1:2013

260. KS IEC 60127-1:1999 Kenya Standard — Miniatures fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links To be replaced by KS IEC 60127-1:2006

261. KS IEC 60127-2:1999 Kenya Standard — Miniatures fuses - Part 2: Cartridge fuse-links To be replaced by KS IEC 60127-2:2014

262. KS IEC 60127-3:1988 Kenya Standard — Miniatures fuses - Part 3: Sub-miniature fuse-links To be replaced by KS IEC 60127-3:2015

263. KS IEC 60127-4:1996 Kenya Standard — Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types To be replaced by KS IEC 60127-4:2005

264. KS IEC 60127-5:1988 Kenya Standard — Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links To be replaced by KS IEC 60127-5:2016

265. KS IEC 61643-1:2002 Kenya Standard — Surge protective devices connected to low-voltage power distribution systems - Part 1: Performance requirements and testing methods To be replaced by KS IEC 61643-11:2011

266. KS IEC 60127-6:1994 Kenya Standard — Miniatures fuses - Part 6: Fuse-holders for miniature cartridge fuse-links To be replaced by KS IEC 60127-6:2014

SERVICES DEPARTMENT CONFIRMATIONS

267. KS ISO 10012:2003 Kenya Standard — Measurement management systems - Requirements for measurement processes and measuring equipment.

268. KS 1-1:2010 Kenya Standard — A standard for standards - Part 1: The development of Kenya Standards -Specification.

269. KS EAS 124:1999 Kenya Standard — Rounding off numerical values. 270. KS ISO 10015:1999 Kenya Standard — Quality management - Guidelines for training. 271. KS ISO 10005:2005 Kenya Standard — Quality management systems - Guidelines for

quality plans. 272. KS ISO 10576-1:2003 Kenya Standard — Statistical methods - Guidelines for the evaluation

of conformity with specified requirements - Part 1: General principles. 273. KS ISO 10725:2000 Kenya Standard — Acceptance sampling plans and procedures for the

inspection of bulk materials. 274. KS ISO 13448-1:2005 Kenya Standard — Acceptance sampling procedures based on the

allocation of priorities principle (APP) - Part 1: Guidelines for the APP approach. 275. KS ISO 13448-2:2004 Kenya Standard — Acceptance sampling procedures based on the

allocation of priorities principle (APP) - Part 2: Coordinated single sampling plans for acceptance sampling by attributes.

276. KS ISO 14025:2006 Kenya Standard — Environmental labels and declarations - Type III environmental declarations - Principles and procedures.

277. KS ISO 14040:2006 Kenya Standard — Environmental management - Life cycle assessment - Principles and framework.

278. KS ISO 14063:2006 Kenya Standard — Environmental management - Environmental communication - Guidelines and examples.

279. KS ISO 14064-1:2006 Kenya Standard — Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals.

280. KS ISO 14064-2:2006 Kenya Standard — Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements.

281. KS ISO 14064-3:2006 Kenya Standard — Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions.

282. KS ISO 14560:2004 Kenya Standard — Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million.

283. KS ISO 16269-7:2001 Kenya Standard — Statistical interpretation of data - Part 7: Median - Estimation and confidence intervals.


JULY 2017

of 30

284. KS ISO 2854:1976 Kenya Standard — Statistical interpretation of data - Techniques of estimation and test relating to means and variances.

285. KS ISO 2859-0:2003 Kenya Standard — Sampling procedures for inspection by attributes - Part 0: Introduction to ISO 2859 Attribute sampling system.

286. KS ISO 2859-1:1999 Kenya Standard — Sampling procedures for inspection by attributes - Part 1: Sampling plans indexed by Quality Level (AQL) for Lot-By-Lot Inspection.

287. KS ISO 2859-10:2006 Kenya Standard — Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes.

288. KS ISO 2859-2:1985 Kenya Standard — Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting Quality (LQ) for isolated lot inspection.

289. KS ISO 3951-5:2006 Kenya Standard — Sampling procedures for inspection by variables - Part 5: Sequencial sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation).

290. KS ISO 5479:1997 Kenya Standard — Statistical interpretation of data - Test for departure from the normal distribution.

291. KS ISO 5725-1:1994 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions.

292. KS ISO 5725-2:1994 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method.

293. KS ISO 5725-3:1994 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method.

294. KS ISO 5725-4:1994 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method.

295. KS ISO 5725-5:1998 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method.

296. KS ISO 5725-6:1994 Kenya Standard — Accuracy (trueness and precision) of measurement methods and results - Part 6: Use in practice of accuracy values.

297. KS ISO 3301:1975 Kenya Standard — Statistical interpretation of data - Comparison of two means in the case of paired obervations.

298. KS ISO 2859-4:2002 Kenya Standard — Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels.

299. KS ISO 2859-5:2005 Kenya Standard — inspection.ocedures for inspection by attributes - Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot

300. KS ISO 3494:1976 Kenya Standard — Statistical interpretation of data - Power of tests relating to means and variances.

301. KS ISO 3534-1:2006 Kenya Standard — Statistics - Vocabulary and symbols - Part 1: General statistical terms used in probability.

302. KS ISO 3534-2:2006 Kenya Standard — Statistics - Vocabulary and symbols - Part 2: Applied statistics.

303. KS ISO GUIDE 27:1983 Kenya Standard — Guidelines for corrective action to be taken by a certification body in the event of misuse of its mark of conformity.

304. KS ISO IEC G 2:2004 Kenya Standard — Standardization and related activities - General vocabulary.

305. KS ISO IEC G 23:1982 Kenya Standard — Methods of indicating conformity with standards for third-party certification systems.

306. KS ISO TR 10017:2003 Kenya Standard — Guidance on statistical techniques for KS ISO 9001:2000.

307. KSISOIECGU 21-1:2005 Kenya Standard — Regional or national adoption of International Standards and other International Deliverables - Part 1: Adoption of International Standards.

308. KS ISO/IEC GU 21-2:2005 Kenya Standard — Regional or national adoption of International Standards and other International Deliverables - Part 2: Adoption of international deliverables other than International Standards


JULY 2017

of 30

309. KS 1437-3-3.1:1999 Kenya Standard — Quality vocabulary - Part 3: Availability, reliability and maintainability terms - Section 3.1 - Guide to concepts and related definitions.

310. KS 1437-3-3.2:1999 Kenya Standard — Quality vocabulary - Part 3: Availability, reliability and maintainability terms. Section 3.2: Glossary of international terms.

311. KS ISO 19706:2011 Kenya Standard — Guidelines for assessing the fire threat to people 312. KS ISO 13289:2011 Kenya Standard — Recreational diving services – Requirements for the

conduct of snorkeling excursions 313. KS ISO 13970:2011 Kenya Standard — Recreational diving services – Requirements for the

training of recreational snorkeling 314. KS ISO 2216: 2011 Kenya Standard — Disaster/Emergency and business continuity

programs – An assessment and implementation tool 315. KS ISO 22320:2011 Kenya Standard — Societal Security – Emergency management –

Requirements for incidents response 316. KS ISO 22312:2011 Kenya Standard — Societal security – Technology capabilities 317. KS ISO 26367-1:2011 Kenya Standard — Guidelines for assessing the adverse

environmental impact of fire effluents, Part 1: General 318. KNWA 2409-1:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 1: Heavy Duty Boots -Specifications 319. KNWA 2409-2:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 2: Helmet - Specifications 320. KNWA 2409-3:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 3: Plastic Apron Specifications 321. KNWA 2409-4:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 4: Colour Coded Bins(health care waste bins)-Specifications 322. KNWA 2409-5:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 5: Bin liners (polythene bags)-Specification 323. KNWA 2409-1:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 6: Face masks - Specification 324. KNWA 2409-7:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 7: Overall Clothings - Specifications 325. KNWA 2409-8:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 8: Safety Goggles - Specification 326. KNWA 2409-1:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 9: Waste Transfer Trolley 327. KNWA 2409-10:2012 Kenya Standard — Health Care Wastes Management Commodities -

Part 10: Gloves – Specifications 328. KNWA 2068:2007 Kenya Standard — Coconut (coir) fibre — Specification 329. KNWA 2468:2013 Kenya Standard — Makuti – Specification 330. KNWA 2467:2013 Kenya Standard — Coco leaf midrib brooms (petiole) – Specification 331. KNWA 2474:2013 Kenya Standard — Coco wood sawn timber – Specification 332. KNWA 2488:2012 Kenya Standard — Coconut Milk and coconut cream – Specification 333. KNWA 2466:2012 Kenya Standard — Coppra – Specification 334. KNWA 2487:2012 Kenya Standard — Coconut – Grading guidelines 335. KNWA 2484:2012 Kenya Standard — Coconut syrup (ngizi) – Specification 336. KNWA 2485:2013 Kenya Standard — Coconut vinegar – Specification 337. KNWA 2486:2013 Kenya Standard — Tender coconut water – Specification 338. KS 2367: 2012, Student accommodation – Off-campus – Code of practice 339. KS 2368-1:2012 Kenya Standard — Academic quality assurance in higher education – Code

of practice Part 1: Programme design, approval, monitoring and review 340. KS ISO 5912:2011 Kenya Standard — Camping Tent 341. KS ISO 7152:1997/Amd 1:2006) Kenya Standard — Camping tents and caravan awnings --

Vocabulary and list of equivalent terms 342. KS ISO 6289:2003 Kenya Standard — Skis – Vocabulary 343. KS ISO 10966:2011 Kenya Standard — Sports and recreational equipment -- Fabrics for

awnings – Specification 344. KS ISO 10256:2003 Kenya Standard — Head and face protection for use in ice hockey 345. KS ISO 15537:2004 Kenya Standard — Principles for selecting and using test persons for

testing anthropometric aspects of industrial products and designs


JULY 2017

of 30

346. KS ISO 11064-4:2004 Kenya Standard — Ergonomic design of control centers -- Part 4: Layout and dimensions of workstations

347. KS ISO 9241-100:2010 Kenya Standard — Ergonomics of human-system interaction -- Part 100: Introduction to standards related to software ergonomics

348. KS ISO 28802 Kenya Standard — Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people

349. KS ISO 28803 Kenya Standard — Ergonomics of the physical environment — Application of International Standards to people with special requirements

350. KS 1737:2004 Kenya Standard — Safe use of X-rays in medical diagnosis - Code of practice 351. KS 1955:2007 Kenya Standard — Radiation protection in dentistry - Code of practice. 352. KS 2048-1:2007 Kenya Standard — Occupational noise management - Part 1: Overview. 353. KS 2048-2:2010 Kenya Standard — Occupational noise management - Specification - Part

2: Measurement and assessment of noise emmision and exposure. 354. KS 2093-1:2007 Kenya Standard — Hearing protectors - Specification - Part 1: Ear-muffs. 355. KS 2093-2:2010 Kenya Standard — Hearing protectors - Specification - Part 2: Earplugs. 356. KS 2093-3:2010 Kenya Standard — Hearing protectors - Specification - Part 3: Ear-muffs

attached to an industrial safety helmet 357. KS 2094:2007 Kenya Standard — Accident action pack for personal and public service

vehicles (PSV) - Specification 358. KS 2172:2008 Kenya Standard — Consumer goods - Criteria for assessment of fitness for

purpose and safety 359. KS ISO 10993-1:2003 Kenya Standard — Biological evaluation of medical devices - Part 1:

Evaluation and testing. 360. KS ISO 10993-10:2002 Kenya Standard — Biological evaluation of medical devices - Part

10: Tests for irritation and delayed-type hypersensitivity. 361. KS ISO 10993-2:1992 Kenya Standard — Biological evaluation of medical devices - Part 2:

Animal welfare requirements. 362. KS ISO 10993-3:2003 Kenya Standard — Biological evaluation of medical devices - Part 3:

Tests for genotoxicity, carcinogenicity and reproductive toxicity. 363. KS ISO 10993-4:2002 Kenya Standard — Biological evaluation of medical devices - Part 4:

Selection of tests for interactions with blood. 364. KS ISO 10993-5:1999 Kenya Standard — Biological evaluation of medical devices - Part 5:

Tests for in vitro cytotoxicity. 365. KS ISO 10993-6:1994 Kenya Standard — Biological evaluation of medical devices - Part 6:

Tests for local effects after implantation. 366. KS ISO 10993-9:1999 Kenya Standard — Biological evaluation of medical devices - Part 9:

Framework for identification and quantification of potential degradation products. 367. KS ISO 10993-11:1993 Kenya Standard — Biological evaluation of medical devices - Part

11: Tests for systemic toxicity. 368. KS ISO 10993-12:2002 Kenya Standard — Biological evaluation of medical devices - Part

12: Sample preparation and reference materials. 369. KS ISO 10993-13:1998 Kenya Standard — Biological evaluation of medical devices - Part

13: Identification and quantification of degradation products from polymeric medical devices. 370. KS ISO 10993-14:2001 Kenya Standard — Biological evaluation of medical devices - Part

14: Identification and quantification of degradation products from ceramics. 371. KS ISO 10993-15:2000 Kenya Standard — Biological evaluation of medical devices - Part

15: Identification and quantification of degradation products from metals and alloys. 372. KS ISO 10993-16:1997 Kenya Standard — Biological evaluation of medical devices - Part

16: Toxicokinetic study design for degradation products and leachables 373. KS ISO 10993-17:2002 Kenya Standard — Biological evaluation of medical devices - Part

17: Establishment of allowable limits for leachable substances 374. KS ISO 5367:2000 Kenya Standard — Breathing tubes intended for use with anaesthetic

apparatus and ventilators 375. KS ISO 5832-1:2007 Kenya Standard — Impacts for surgery- Metallic materials Part 1:

Wrought stainless steel 376. KS ISO 5832-12:2007 Kenya Standard — Implants for surgery- Metallic materials Part 12:

Wrought cobalt-chromium-molybdenum alloy


JULY 2017

of 30

377. KS ISO 5832-14:2007 Kenya Standard — Implants for surgery- Metallic materials Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy.

378. KS ISO 5832-3:1996 Kenya Standard — Implant for surgery - Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy.

379. KS ISO 5832-4:1996 Kenya Standard — Implants for surgery- Metallic materials Part 4: Cobalt-chromium-molybdenum casting alloy

380. KS ISO 5832-5:2005 Kenya Standard — Implants for surgery-Metallic materials Part 5: Wrought cobalt-chromium- tungsten-nickel alloy.

381. KS ISO 5832-9:2007 Kenya Standard — Implants for surgery- Metallic materials Part 9: Wrought high nitrogen stainless steel.

382. KS ISO 7151:1988 Kenya Standard — Kenya Standard — Surgical instruments - Non-cutting, articulated instruments - General requirements and test methods.

383. KS ISO 7153-1:1991 Kenya Standard — Surgical instruments - Metallic materials - Specification - Part 1: Stainless steel

384. KS ISO 7740:1985 Kenya Standard — Instruments for surgery - Scalpels with detachable blades - Fitting dimensions.

385. KS ISO 7741:1986 Kenya Standard — Instruments for surgery - Scissors and shears - general requirements and test methods.

386. KS ISO 80601-2-12 Kenya Standard — Medical electrical equipment Part 2-12 Particular requirements for basic safety and essential performance of critical care ventilators

387. KS 1816:2005 Kenya Standard — Sharps containers - Specification. 388. KS ISO 3107:2011 Kenya Standard — Dentistry- Zinc oxide/eugenol cements and zinc

oxide/non-eugenol cements 389. KS 01-1:2010 A standard for standards - Part 1: The development of Kenya Standards -

Specification. 390. KS ISO 15098-1:1999 Kenya Standard — Dental tweezers - Part 1: General requirements. 391. KS ISO 1942:2009 Kenya Standard — Dentistry- Vocablary 392. KS ISO 1942-1:1989 Kenya Standard — Dental vocabulary - Part 1: General and clinical

terms 393. KS ISO 1942-2:1989 Kenya Standard — Dental vocabulary - Part 2: Dental materials. 394. KS ISO 1942-3:1989 Kenya Standard — Dental vocabulary - Part 3: Dental instruments. 395. KS ISO 1942-4:1989 Kenya Standard — Dental vocabulary - Part 4: Dental equipment. 396. KS ISO 1560:1985 Kenya Standard — Dental mercury. 397. KS 1736:2003 Kenya Standard — Dental porcelain - Specification. 398. KS ISO 3950:2009 Kenya Standard — Dentistry- Designation system for teeth and areas of

the oral cavity. 399. KS ISO 8627:1987 Kenya Standard — Dentistry - Determination of stiffness of the tufted

area of toothbrushes. 400. KS ISO 7885:2010 Kenya Standard — Dentistry- Sterile injection needles for single use. 401. KS ISO 15098-2:2001 Kenya Standard — Dental tweezers - Part 2: Meriam types. 402. KS ISO 3630-1:2008 Kenya Standard — Dentistry- Toot-canal instruments Part 1: General

requirements and test methods. 403. KS ISO 10139-2:2009 Kenya Standard — Dentistry- Soft lining materials for removable

dentures Part 2: Materials for long-term use. 404. KS ISO 1797-2:1992 Kenya Standard — Dental rotary instruments- Shanks Part 2: shanks

made of plastics. 405. KS ISO 15098-3:2000 Kenya Standard — Dental tweezers - Part 3: College types. 406. KS ISO 9873:1998 Kenya Standard — Dental hand instruments - Reusable mirrors and

handles. 407. KS ISO 9917-1:2010 Kenya Standard — Dentistry- Water-based cements Part 2: Resin-

modified cements 408. KS ISO 15189:2007 Kenya Standard — Medical laboratories - Particular requirements for

quality and competence. 409. KS ISO 19001:2002 Kenya Standard — In vitro diagnostic medical devices - Information

supplied by the manufacturer with in vitro diagnostic reagents for staining in biology. 410. KS ISO 21171:2006 Kenya Standard — Medical gloves - Determination of removable

surface powder.


JULY 2017

of 30

411. KS ISO 5361:1999 Kenya Standard — Anaesthetic and respiratory equipment - Tracheal tubes and connectors.

412. KS ISO 10002:2004 Kenya Standard — Quality management - Customer satisfaction - Guidelines for complaints handling in organizations

413. KS ISO 11689:1996 Kenya Standard — Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment.

414. KS ISO 11690-1:1996 Kenya Standard — Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 1: Noise control strategies.

415. KS ISO 11690-2:1996 Kenya Standard — Acoustics - Recommended practice for the design of low-noise workplaces containing machinery - Part 2: Noise control measures.

416. KS ISO 11691:1995 Kenya Standard — Acoustics - Measurements of insertion loss of ducted silencers without flow - Laboratory survey method.

417. KS ISO 1680:1999 Kenya Standard — Acoustics - Test code for the measurement of airborne noise emitted by rotating electrical machines.

418. KS ISO 1683:2008 Kenya Standard — Acoustics - Preferred reference values for acoustical and vibratory levels.

419. KS ISO 1996-1:2003 Kenya Standard — Acoustics - Description, measurement and assessment of environmental noise - Part 1: Basic quantities and assessment procedures.

420. KS ISO 2151:2004 Kenya Standard — Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (Grade 2).

421. KS ISO 3382:1997 Kenya Standard — Acoustics - Measurements of the reverberation time of rooms with reference to other acoustical parameters.

422. KS ISO 354:1985 Kenya Standard — Acoustics - Measurement of sound absorption in a reverberation room.

423. KS ISO 3740:2000 Kenya Standard — Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards.

424. KS ISO 3741:1999 Kenya Standard — Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms.

425. KS ISO 3743-1:1994 Kenya Standard — Acoustics - Determination of sound power levels of noise sources - Engineering methods for small, movable sources in reverberant fields - Part 1: Comparison method for hard-walled test rooms.

426. KS ISO 3744:1994 Kenya Standard — Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering method in an essentially free field over a reflecting plane.

427. KS ISO 3745:2003 Kenya Standard — Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for anechoic and hemi-anechoic rooms.

428. KS ISO 3746:1995 Kenya Standard — Acoustics - Determination of sound power levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane.

429. KS ISO 3747:2000 Kenya Standard — Acoustics - Determination of sound power levels of noise sources using sound pressure - Comparison method in situ.

430. KS ISO 4872:1978 Kenya Standard — Acoustics - Measurement of airborne noise emitted by construction equipment intended for outdoor use - Method for determining compliance with noise limits.

431. KS ISO 5136:1990 Kenya Standard — Acoustics - Determination of sound power radiated into a duct by fans - In-duct method.

432. KS ISO 717-1:1996 Kenya Standard — Acoustics - Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation.

433. KS ISO 717-2:1996 Kenya Standard — Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation.

434. KS ISO 7574-1:1985 Kenya Standard — Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 1: General considerations and definitions.

435. KS ISO 7574-2:1985 Kenya Standard — Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 2: Methods for stated values for individual machines.


JULY 2017

of 30

436. KS ISO 7574-3:1985 Kenya Standard — Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 3 : Simple (transition) method for stated values for batches of machines.

437. KS ISO 7574-4:1985 Kenya Standard — Acoustics - Statistical methods for determining and verifying stated noise emission values of machinery and equipment - Part 4 : Methods for stated values for batches of machines.

438. KS ISO 7779:1999 Kenya Standard — Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment.

439. KS ISO 7779-AM1:2003 Kenya Standard — Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment - Amendment 1: Noise measurement specification for CD / DVD-ROM drives.

440. KS ISO 5349-1:2001 Kenya Standard — Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements.

441. KS ISO 5349-2:2001 Kenya Standard — Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practice guidance for measurement at the workplace.

442. KS ISO 5805:2000 Kenya Standard — Mechanical vibration and shock - Human exposure - Vocabulary.

443. KS ISO 14064-1:2006 Kenya Standard — Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals

444. KS ISO 14064-2:2006 Kenya Standard — Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements.

445. KS ISO 14064-3:2006 Kenya Standard — Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions.

446. KS ISO 4007:1977 Kenya Standard — Personal eye-protectors-Vocabulary. 447. KS ISO 4849:1981 Kenya Standard — Personal eye-protectors-Specifications. 448. KS ISO 4854:1981 Kenya Standard — Personal eye-protectors-Optical test methods. 449. KS ISO 4855:1981 Kenya Standard — Personal eye-protectors- Non-optical test methods. 450. KS ISO 8536-1:2000 Kenya Standard — Infusion equipment for medical use - Part 1:

Infusion glass bottles. 451. KS ISO 8536-2:2001 Kenya Standard — Infusion equipment for medical use - Part 2:

Closure for infusion bottles. 452. KS ISO 8536-3:1999 Kenya Standard — Infusion equipment for medical use - Part 3:

Aluminium caps for infusion bottles. 453. KS ISO 8536-4:1998 Kenya Standard — Infusion equipment for medical use - Part 4:

Infusion sets for single use, gravity feed. 454. KS ISO 8637:2010 Kenya Standard — Cardiovascular implants and extracorporeal systems

Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators. 455. KS ISO 8669-2:1996 Kenya Standard — Urine collection bags part 2: Requirements and test

methods. 456. KS ISO 8871-1:2003 Kenya Standard — Elastomeric parts for parenterals and for devices

for pharmaceutical use Part 1: Extractables in aqueous autoclavates. 457. KS ISO 8871-2:2003 Kenya Standard — Elastomeric parts for parenterals and for devices

for pharmaceutical use - Part 2: Identification and characterization. 458. KS ISO 8871-3:2003 Kenya Standard — Elastomeric parts for parenterals and for devices

for pharmaceutical use - Part 3: Determination of released-particle count. 459. KS ISO 8871-4:2006 Kenya Standard — Elastomeric parts for parenterals and for devices

for pharmaceutical use - Part 4: Biological requirements and test methods. 460. KS ISO 9585:1990 Kenya Standard — Implants for surgery - Determination of bending

strength and stiffness of bone plate. 461. KS ISO/TR 16142:2006 Kenya Standard — Medical devices-Guidance on the selection of

standards in support of recognized essential principles of safety and performance of medical devices.

462. KS ISO 11737-2:2009 Kenya Standard — Sterilization of medical devices — Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process


JULY 2017

of 30

463. KS ISO 5367:2000 Kenya Standard — Breathing tubes intended for use with anaesthetic apparatus and ventilators

464. KS ISO 7740:1996 Kenya Standard — Instruments for surgery — scalpel with detachable blades — fitting dimensions

465. KS ISO 8185: 2007 Kenya Standard — Respiratory tract humidifiers for medical use — Particular requirements for respiratory humidification systems

466. KS ISO 8637:2010 Kenya Standard — Cardiovascular implants and extracorporeal systems — Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

467. KS ISO 7886-4:2006 Kenya Standard — Sterile hypodermic syringes for Single use Part 4: Syringes with re-use prevention feature

468. KS EAS 229:2001 Kenya Standard — Crepe bandages - Specification. 469. KS 2418:2012 Kenya Standard — Practice Tourism and Accommodation 470. KS 2181-10:2010 Kenya Standard — Tourism services-Hotels and related establishments-

Grading requirements Part 10: Vacation hotels 471. KS2181-11:2010 Kenya Standard — Tourism services - Hotels and related establishments -

Grading requirements - Part 11: Hotels. 472. KS 2181-12:2010 Kenya Standard — Tourism services - Hotels and related establishments -

Grading requirements - Part 12: Holiday cottages. 473. KS 2181-14:2010 Kenya Standard — Tourism services-Hotels and related establishments-

Grading requirements Part 14: Camping/caravan sites 474. KS 2369:2012 Kenya Standard — Basic minimum standards for adventure tourism activities-

Requirements 475. KS 2343:2012 Kenya Standard — Code of practice for travel agencies 476. KS 2363:2012 Kenya Standard — Convention centers- Guidelines 477. KS 2537:2014 Kenya Standard — Guidelines for ecotourism in protected and non-protected

areas 478. KS ISO 13970:2011 Kenya Standard — Recreational diving services- Requirements for the

training of recreational snorkelling guides 479. KS 2655:2017 Kenya Standard — Sign posts for trails - Guidelines. 480. KS 2389:2012 Kenya Standard — Tour operators-Code of practice 481. KS 2389;2012 Kenya Standard — Tour operators - Code of practice 482. KS ISO 13293:2012 Kenya Standard — Recreational diving services- Requirements for gas

blender training programmes 483. KS ISO 13289:2011 Kenya Standard — Recreational diving services- Requirements for the

conduct of snorkelling excursions 484. KS ISO 13970:2011 Kenya Standard — Recreational diving services- Requirements for the

training of recreational snorkelling guides 485. KS ISO 24801-1:2010 Kenya Standard — Recreational diving services - Safety related

minimum requirements for the training of recreational scuba divers. Part: 1 Level 1 - Supervised diver

486. KS ISO 24801-2:2007 Kenya Standard — Recreational diving services - Safety related minimum requirements for the traing of recreational scuba divers. Part 2: Level 2 - Autonomous diver

487. KS ISO 24801-3:2010, Recreational diving services - Safety related minimim requirements for the training of recretional scuba divers. Part 3: Level 3 - Dive leader

488. KS ISO 24802-1:2010, Recreational diving services - Safety related minimum requirements for the training of scuba instructors. Part 1: Level 1

489. KS ISO 24802-2:2010, Recreational diving services - Safety related minimum requirements for the training of scuba instructors. Part 2 Level 2

490. KS 2240:2012, Tourism related water sports activities within Kenya's territorial water-code of conduct,

491. KS 2011:2007Artificial sports surfaces - Methods for determination of durability - Part 1: Determination of abrasion resistance to abrasive wheels.

492. KS 2013-2:2007, Artificial sports surfaces - Methods for determination of ball / surface interaction - Part 2: Determination of ball roll.

493. KS 2013-3:2007, Artificial sports surfaces - Methods for determination of ball / surface interaction - Part 3: Determination of the velocity change of a rolling ball.


JULY 2017

of 30

494. KS 2013-4:2007, Artificial sports surfaces - Methods for determination of ball / surface interaction - Part 4: Determination of spin.

495. KS 2013-5:2007, Artificial sports surfaces - Methods for determination of ball / surface interaction - Part 5: Determination of stiffness.

496. KS 2015-1:2007, Artificial sports surfaces - Methods for determination of durability - Part 1: Determination of abrasion resistance to abrasive wheels.

497. KS 2015-2:2007, Artificial sports surfaces - Methods for determination of durability - Part 2: Determination of abrasion resistance to metal blades.

498. KS 2015-3:2007, Artificial sports surfaces - Methods for determination of durability - Part 3: Determination of fatigue resistance.

499. KS 2014-2:2007, Artificial sports surfaces - Methods for determination of person / surface interaction - Part 2: Determination of sliding distance.KS 2014-3:2007, Artificial sports surfaces - Methods for determination of person / surface interaction - Part 3: Determination of slip resistance.

500. KS 2014-4:2007, Artificial sports surfaces - Methods for determination of person / surface interaction - Part 4 Determination of peak deceleration.

501. KS 2013-1:2007, Artificial sports surfaces - Methods of determination of ball / surface interaction - Pat 1: Determination of rebound resilience.

502. KS 1462:1999, Glossary of Public Health and Environmental engineering terms. 503. KS ISO 22320:2011 Societal security- Emergency management-Requirements for incident

response 504. KS ISO/TR 22312:2011 Societal security- Technological capabilities 505. KS 2216:2011 Disaster/emergency and business continuity programs - An assessment and

implementation tool 506. KS ISO 26367-1:2011 Guidelines for assessing the adverse environmental impact of fire

effluents Part 1: General 507. KS ISO 19706:2011 Guidelines for assessing the fire threat to people 508. KS ISO 13289:2011 Recreational diving services- Requirements for the conduct of

snorkelling excursions 509. KS ISO 13970:2011 Recreational diving services- Requirements for the training of

recreational snorkelling guides 510. KS 2352:2012 Tourism services- Culture heritage- Terminology 511. KS 2369:2012 Basic minimum standards for adventure tourism activities- Requirements 512. KS 2369:2012 Tourism services- travel agencies and tour operators- Terminology 513. KS 2418:2012 Hotels, restaurants and related establishments – Code of practice 514. KS ISO 24500:2010 Ergonomics - Accessible design - Auditory signals for consumer

products 515. KS ISO 24501:2010 Ergonomics- Accessible design-Sound pressure levels of auditory

signals for consumer products 516. KS ISO/TR 7250-2 Basic human body measurements for technological design Part 2:

Statistical summaries of body measurements from individual ISO populations 517. KS ISO/TR 9241-100 Ergonomics of human-system interaction Part 100: Introduction of

standards related to software ergonomics 518. KSISO/TS 18152: 2010 Ergonomics of human-system interaction Specification for the

process assessment of human-system issues 519. KS ISO 11064-4:2004 Ergonomic design of control centres Part 4: Layout and dimensions of

workstations 520. KS ISO 11226:2000 Ergonomics - Evaluation of static working postures. 521. KS ISO 11228-2:2007 Ergonomics - Manual handling - Part 2: Pushing and pulling. 522. KS ISO 11228-3:2007 Ergonomics - Manual handling - Part 3: Handling of low loads at high

frequency. 523. KS ISO 11399:1995 Ergonomics of the thermal environment - Principles and application of

relevant International Standards. 524. KS ISO 11429:1996 Ergonomics - Systems of auditory and visual danger and information

signals. 525. KS ISO 12894:2001 Ergonomics of the thermal environment - Medical supervision of

individuals exposed to extreme hot or cold environments.


JULY 2017

of 30

526. KS ISO 13406-1:1999 Ergonomic requirements for work with visual displays based on flat panels - Part 1: Introduction.

527. KS ISO 13406-2:2001 Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays.

528. KS ISO 16175-3: 2010 , Information and documentation Principles and functional requirements for records in electronic office environments part 3: Guidelines and functional requirements for records in business systems

529. KS ISO 15511:2011 Information and documentation - International standard identifier for Libraries and related organizations (ISIL).

530. KS ISO 10444:1994 Information and documentation - International standard technical report number (ISRN).

531. KS ISO 1086:1991 Information and documentation - Title leaves of books. 532. KS ISO 10957:2009 Information and documentation - International standard music number

(ISMN). 533. KS ISO 11108:1996 , Information and documentation - Archival paper - Requirements for

permanence and durability. 534. KS ISO 11798:1999 Information and documentation - Permanence and durability of writing,

printing and copying on paper - Requirements and test methods. 535. KS ISO 11799:2003 Information and documentation - Document storage requirements for

archive and library materials. 536. KS ISO 11800:1998 Information and documentation - Requirements for binding materials

and methods used in the manufacture of books. WITHDRAWALS

537. KS 1:1996 -Guide for drafting Kenya Standards To be replaced by KS 1-1:2010 538. KS ISO 10011-1:1990 -Guidelines for auditing quality systems - Part 1: Auditing To be

replaced by KS ISO 19011:2011 539. KS ISO 10011-2:1991 -Guidelines for auditing quality systems - Part 2: Qualification criteria

for quality systems auditors To be replaced by KS ISO 19011:2011 540. KS ISO 10011-3:1991 - Guidelines for auditing quality systems - Part 3: Management of

audit programmes To be replaced by KS ISO 19011:2011 541. KS ISO 14010:1996 -Guidelines for environmental auditing - General principles To be

replaced by KS ISO 19011:2011 542. KS ISO 14011:1996 -Guidelines for environmental auditing - Audit procedures - Auditing of

environmental management systems To be replaced by KS ISO 19011:2011 543. KS ISO 14012:1996 -Guidelines for environmental auditing - Qualification for environmental

auditors To be replaced by KS ISO 19011:2011) 544. KS ISO 14041:1998 -Environmental management - Life cycle assessment - Goal and scope

definition and inventory analysis. (incorporated into KS ISO 14040). 545. KS ISO 14042:2000 -Environmental management - Life cycle assessment - Life cycle impact

assessment To be replaced by ISO 14040:2006 546. KS ISO 19011:2002 -Guidelines for quality and / or environmental management systems

auditing To be replaced KS ISO 19011:2011 547. KS ISO 3207:1975 -Statistical interpretation of data - Determination of a statistical tolerance

interval. (Incorporated into KS ISO 16269-6:2005) 548. KS ISO 69:1999 -Harmonized stage code system - Principles and guidelines for use.

(Withdrawn by ISO and not replaced) 549. KS ISO 9004-4:1996-Quality management and quality assurance standards - Part 4: Guide

to dependability programme management To be replaced by KS ISO 9004: 2009) 550. KS ISO GUIDE 72:2001 - Guidelines for the justification and development of management

system standards. 551. KS ISO IEC G 22:1996 -General criteria for supplier's declaration of conformity To be

replaced by KS ISO IEC 17050 -1, KS ISO/IEC 17050-2 552. KS ISO IEC G 58:1993 -Calibration and testing accreditation systems - General

requirements for operation and recognition To be replaced by KS ISO/IEC 17011:2004 553. KS ISO IEC G 61:1996 -General requirements for assessment and accreditation of

certification/registration bodies To be replaced by KS ISO/IEC 17011:2004


JULY 2017

of 30

554. KS ISO IEC G 62:1996 -General requirements for bodies operating assessment and certification/registration of quality systems To be replaced by ISO/IEC 17021:2006

555. KS ISO IEC G 65:1996 -General requirements for bodies operating products certification systems To be replaced by KS ISO 17065

556. KS ISO IECGU 28:2004 -Conformity assessment - Guidance on a third-party certification system for products To be replaced by ISO/IEC TR 17026:2015

557. KS ISO IECGU 66:1999 -General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS) To be replaced KS ISO IEC 17021 -2

558. KS ISO IWA 4:2005 -Quality management systems - Guidelines for the application of ISO 9001:2000 in local government To be replaced by KS ISO 18091 :2014

559. KS ISOIEC GU 53:2005 -Conformity assessment - Guidance on the use of an organization's quality management system in product certification To be replaced ISO/IEC TR 17026:2015

560. KSISOIEC G 43-1:1997 -Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes To be replaced by KS ISO/IEC 17043:2010

561. KS ISO/IEC G 43-2:1997 -Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies To be replaced by KS ISO/IEC 17043:2010

562. KS ISO 14969:1999 -Quality systems - Medical devices - Guidance on the application of ISO 13485 and ISO 13488.

563. KS EAS 187: 2000, Toothpaste — Specification To be replaced by KS 352:1999) 564. KS EAS 457:2007, Dentistry — Manual toothbrushes — Resistance of tufted portion to

deflection To be replaced by ISO 22254 565. KS EAS 458:2007, Dentistry — Powered toothbrushes — General requirements and test

methods To be replaced by ISO 20126:2005 566. KS EAS 459:2007, Dentistry — Oral hygiene products — Oral rinses To be replaced by KS

ISO 16408 567. KS EAS 460:2007, Dentistry — Oral hygiene products — Manual interdental brushes To be

replaced by KS ISO 16409 568. KS EAS 479:2008, Dentistry — Manual toothbrushes — General requirements and test

methods To be replaced by KS ISO 20126:2005 569. KS ISO 7886-1:1993, Sterile hypodermic syringes for single use, Part 1: Syringes for

manual use To be replaced by KS ISO 7886:2017 570. KS ISO 7886-2:1996, Sterile hypodermic syringes for Single use -Part 2:Syringes for use

with power-driven Syringe Pumps To be replaced by ISO 7886-2:2006 571. KS ISO 3864-1:2003 - Graphical symbols — Safety colours and signs — Part 1: Design

principles for safety signs in workplaces and public areas To be replaced by KS ISO 3864-1:2011

572. KS ISO 3864-3:2006 - Graphcal symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs To be replaced by KS ISO 3864-3:2012

573. KS ISO 3864-2:2004 - Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety Labels To be replaced by KS ISO 3864-2:2016

574. KS ISO 14123-1:1998 Safety of machinery -Reduction of risks to health from hazardous substances emitted by machinery -Part 1: Principles and Specifications for machinery manufacturers To be replaced by KS ISO 14123-1:2015

575. KS ISO 14123-2:1998 Safety of machinery -Reduction of risks to health from hazardous substances emitted by machinery -Part 2: Methodology leading to verification procedures To be replaced by KS ISO 14123-2:2015

576. KS 2092:2007, Portable first aid kits — Specification To be replaced by KS 2092:2017 577. KS 2214:2009, Adventurous tourism — Tour leader — Personal competency To be

replaced by KS 2214:2017 578. KS ISO 10007:2003 Kenya Standard — Quality management — Guidelines for

configuration management, To be replaced by KS ISO 10007:2017


JULY 2017

of 30

ENGINEERING DEPARTMENT CONFIRMATIONS

579. KS 1605:2001 Specification for hardwood poles, droppers, laths, guardrail post and spacer blocks.

580. KS 1606:2001 Specification for wood blocks for floors. 581. KS 1608:2001 Specification for wooden fence posts. 582. KS 1804-1:2003 Wood preservatives - Part 1: Determination of the effectiveness against

Lyctus brunneus (stephens) - Application by surface treatment (Laboratory method). 583. KS 1804-2:2003 Wood preservatives - Part 2: Determination of preventive action against

recently hatched larvae of Hylotrupes bajulus (Linnaeus) (Laboratory method). 584. KS 1804-3:2003 Wood preservatives - Part 3: Determination of preventive effect on

Reticulitermes santonensis-De Feytaud (Laboratory method). 585. KS 1804-4:2003 Wood preservatives - Part 4: Test method for determining the protective

effectiveness against wood destroying basidiomycetes - Determination of the toxic values (Laboratory method).

586. KS 1804-5:2003 Wood preservatives - Part 5: Field test method for determining the relative protective effect of a wood preservative on wood in contact with the soil.

587. KS 1804-6:2003 Wood preservatives - Part 6: Determination of the protective effectiveness against anobium punctatum (De Geer) by egg-laying and larval survival - Application by surface treatment (Laboratory method).

588. KS 19:1976 Nomenclature of commercial Kenya timbers. 589. KS 448:2010 Wood mosaic parquet - Specification 590. KS 516:2008 Wood poles for power and telecommunication lines - Specification 591. KS 562:1987 Fire tests on door assemblies - evaluation of performance of smoke control

door assemblies. 592. KS 568:1985 Fire resistance tests - Door and shutter assemblies. 593. KS 656-1:2006 Flush door leafs - Specification - Part 1: Solid core type. 594. KS 656-2:2006 Flush door leafs - Specification - Part 2: Cellular and semi-solid core tyre. 595. KS 659:1986 Classification and measurement of plywood panels and test pieces. 596. KS 771:1991 Specification for softwood timber grades for structural use. 597. KS 828-1:2009 Structural use of timber - Part 1: Permissible stress design, materials and

workmanship - Code of practice 598. KS 866:1990 Test methods for the assessment of resistance of surface of furniture to cold

liquids. 599. KS 93:1984 Glossary of terms used in timber. 600. KS 94:1985 Specification for preservation of timber. 601. KS 982-1:1990 Methods of test for determining of physical and mechanical properties of

wood - Part 1: Moisture content. 602. KS 982-10:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 10: Resistance to impact identation. 603. KS 982-12:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 12: Sampling and general requirements. 604. KS 982-2:1990 Methods of test for determining of physical and mechanical properties of

wood - Part 2: Density. 605. KS 982-3:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 3: Testing in compression perpendicular to grain. 606. KS 982-4:1990 Methods of test for determining of physical and mechanical properties of

wood - Part 4: Ultimate strength in static bending. 607. KS 982-5:1990 Methods of test for determining of physical and mechanical properties of

wood - Part 5: Ultimate tensile stress parallel to grain. 608. KS 982-6:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 6: Ultimate shearing stress parallel to grain. 609. KS 982-7:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 7: Impact bending strength. 610. KS 982-8:1990 Methods of test for determination of physical and mechanical properties of

wood - Part 8: Modulus of elasticity in static bending.


JULY 2017

of 30

611. KS 982-9:1990 Methods of test for the determination of physical and mechanical properties of wood - Part 9: Static hardness.

612. KS EAS 23:2000 Timber - Dimensions for coniferous sawn timber (cypress and pine) sizes of sawn and planed timber - Specification.

613. KS EAS 24:2000 Timber industry - Glossary of terms. 614. KS EAS 276:2007 Timber - Determination of volumetric swelling. 615. KS EAS 322:2002 Wood poles and blocks for power and telecommunication lines -

Specification. 616. KS EAS 325:2002 Wood preservatives and treated timber - Guide to sampling and

preparation of wood preservatives and treated timber for analysis. 617. KS ISO 1804:1999 Door - Terminology. 618. KS ISO 2776:1974 Modular coordination - Coordinating sizes for doorsets - External and

internal. 619. KS ISO 4211:1979 Furniture - Assessment of surface resistance to cold liquids. 620. KS ISO 4211-4:1988 Furniture - Tests for surfaces - Part 4: Assessment of resistance to

impact. 621. KS ISO 5323:1984 Solid wood parquet and raw parquet blocks - Vocabulary. 622. KS ISO 5925-1:1981 Fire tests - Evaluation of performance of smoke control door

assemblies - Part 1: Ambient temperature test. 623. KS ISO 5970:1979 Furniture - Chairs and tables for educational institutions - Functional

sizes. 624. KS ISO 6442:1999 Door leaves - Measurement of defects of general flatness. 625. KS ISO 6443:1999 Door leaves - Measurement of dimensions and of defects of squareness. 626. KS ISO 6444:1999 Door leaves - Test of behaviour under humidity variations (Successive

uniform climates). 627. KS ISO 6445:1999 Door and door sets -Test of behaviour between two different climates. 628. KS ISO 6612:1999 Windows and door height windows - Wind resistance tests. 629. KS ISO 6770:1982 Windows and door height windows - Air permeability test. 630. KS ISO 7171:1988 Furniture - Storage units - Determination of stability. 631. KS ISO 7172:1988 Furniture - Tables - Determination of stability. 632. KS ISO 7173:1989 Furniture - Chairs and stools - Determination of strength and durability. 633. KS ISO 8248:1999 Windows and door height windows - Mechanical test. 634. KS ISO 8269:1999 Specification for door and doorsets - Static loading test. 635. KS ISO 8270:1985 Doorsets - Soft heavy body impact test. 636. KS ISO 8272:1999 Specification for doorsets - Air permeability test. 637. KS ISO 8273:1999 Specification for door and doorsets - Standard atmospheres for testing

the performance of doors and doorsets placed between different climates. 638. KS ISO 8274:1999 Specification for doorsets - Determination of closing force. 639. KS ISO 8275:1999 Specification for doorsets - Vertical load test. 640. KS ISO 8965:1999 Logging industry - Technology - Terms. 641. KS ISO 8966:1987 Logging industry - Products - Terms and definitions. 642. KS ISO 9379:1989 Doorsets - Repeated opening and closing test. 643. KS ISO 9381:1999 Specification for doorsets - Static torsion test. 644. KS 2280:2011 Laminate floor coverings - Elements with a surface layer based on

aminoplastic thermosetting resins- Specification 645. KS 2281:2011 Plywood and composite board - Specification 646. KS 1246:1996 Specification for soft boards for general purpose. 647. KS 1247:2005 Specification for veneer decorative plywood 648. KS 1249:1996 Specification for fibre hardboard. 649. KS ISO 820:1975 Particle boards - Definition and classification. 650. KS ISO 769:1972 Fibre building boards - Hard and medium boards - Determination of water

absorption and of swelling in thickness after immersion in water. 651. KS ISO 3546:1976 Fibre building boards - Determination of surface finish (roughness). 652. KS ISO 3729:1976 Fibre building boards - Determination of surface stability. 653. KS ISO 1954:1999 Plywood - Tolerances on dimensions. 654. KS ISO 2074:1972 Plywood - Vocabulary. 655. KS ISO 2426-1:2000 Plywood - Classification by surface appearance - Part 1: General. 656. KS ISO 2426-2:2000 Plywood - Classification by surface appearance - Part 2: Hardwood.


JULY 2017

of 30

657. KS ISO 2426-3:2000 Plywood - Classification by surface appearance - Part 3: Softwood. 658. KS ISO 2695:1976 Fibre building boards - Hard and medium boards for general purposes -

Quality specif ications - Appearance, shape and dimensional tolerantes. 659. KS ISO 2696:1976 Fibre building boards - Hard and medium boards for general purposes -

Quality specifications - Water absorption and swelling in thickness. 660. KS EAS 323:2002 Specification for wood preservation by means of pressure creosoting. 661. KS ISO 1096:1999 Plywood - Classification. 662. KS ISO 1097:1975 Plywood - Measurement of dimensions of panels. 663. KS ISO 1098:1975 Veneer plywood for general use - General requirements. 664. KS ISO 12466-1:1999 Plywood - Bonding quality - Part 1: Test methods. 665. KS ISO 12466-2:1999 Plywood - Bonding quality - Part 2: Requirements. 666. KS 982-11:1990 Test methods for determination of physical and mechanical properties of

wood - Part 11: Ultimate stress in compression parallel to grain. 667. KS 301-2:2010 Plywood - Specification - Part 2: Marine plywood (Second Edition). 668. KS 301-3:2010 Plywood - Specification - Part 3: Shuttering work plywood (Second Edition). 669. KS 2222:2010 Synthetic resin adhesives for plywood - Specification. 670. KS 2226:2010 Plywood - Test method. 671. KS 1607:2001 Specification for wooden packaging cases. 672. KS 100:1982 Specification for asbestos-cement corrugated sheets for roofing and cladding. 673. KS 102:1984 Architectural and building drawings vocabulary. 674. KS 1070:1993 Specification for stabilised soil blocks. 675. KS 110:1984 Symbols for plumbing, water supply, heating, ventilation and ducting. 676. KS 1497:2001 Glossary of terms for pipelines and ducts. 677. KS 1541:1999 Glossary of terms for hydraulic engineering and construction work. 678. KS 17:1986 Specification for sawn timber. 679. KS 1810:2003 Hot-dip aluminium-zinc plain and corrugated steel sheets - Specification. 680. KS 1937-1:2006 Roofing tiles - Test methods - Part 1: Water absorption test. 681. KS 1937-2:2006 Roofing tiles - Test methods - Part 2: Permeability test. 682. KS 2371:1994 Specification for joint buildings - general check-list of joint functions. 683. KS 299:1983 Specification for wrought aluminium alloys extruded bars, round the tube and

sections. 684. KS 300:1983 Specification for burnt building bricks. 685. KS 547:1983 Specification for burnt clay building blocks. 686. KS 561-1:1984 Fire tests on building materials - Part 1: Non-combustibility test. 687. KS 565:1984 Specification on general principles for the verification of the safety of

structures. 688. KS 566:1985 Specification for fire reistance tests - elements of building construction. 689. KS 567:1985 Fire resistance tests - glazed elements. 690. KS 569:1984 Determination for imposed floor loads, loads in production building and

warehouses. 691. KS 624:1986 Specification for bitumen roofing felts. 692. KS 657:1988 Specification for window stays, fasteners and handles for vertically hinged

windows. 693. KS 658:1985 Modular coordination vocabulary for building construction. 694. KS 681:1991 Dimensioning of drawings for buildings. 695. KS 682:1982 Specification for oxidized (Brown) Bitumen adhesive for roofing purposes. 696. KS 742:1988 Code of practice for laying - Part 1: Roofing tiles. 697. KS 754:1987 General vocabulary on building and civil engineering. 698. KS 755-1:1988 Design loading for buildings - Part 1: Code of practice for imposed loads. 699. KS 770-1:1997 Specification for test sieves - Part 1: Test sieves of metal wire cloth. 700. KS 770-2:1997 Specification for test sieves - Part 2: Test sieves of perforated metal plate. 701. KS 770-3:1997 Specification for test sieves - Part 3: Test sieves of electroformed

sheets. 702. KS 865:1993 Code of practice for use of bitumen road emulsions. 703. KS 95:2003 Specification for natural aggregates for use in concrete. 704. KS 966:1999 Code of practice for anti-termite measures in new buildings - Constructional

measures.


JULY 2017

of 30

705. KS 97:1982 Specification and methods of test for building limes (Quicklime and hydrated lime).

706. KS 995:1991 Vocabulary applicable to building tolerances - Derived terms. 707. KS 996-3:1991 Specification for joints in building - Part 3: General check-list of joint

functions. 708. KS 997:1994 Specification for joints in building fundamental principles of design. 709. KS 999-1:2001 Methods of test for soils for Civil Engineering purposes - Part 1: General

requirements and sample preparation. 710. KS 999-2:2001 Methods of test for soils for Civil Engineering purposes - Part 2:

Classification related tests. 711. KS 999-4:2001 Methods of test for soils for Civil Engineering purposes - Part 4: Compaction

related tests. 712. KS 999-5:2001 Methods of test for soils for Civil Engineering purposes - Part 5:

Compressibility, permeability and durability tests. 713. KS 999-6:2001 Methods of test for soils for Civil Engineering purposes - Part 6:

Consolidation and permeability tests in hydraulic cells and with pore pressure measurement.

714. KS 999-7:2001 Methods of test for soils for Civil Engineering purposes - Part 7: Shear strength tests (total stress).

715. KS 999-8:2001 Methods of test for soils for Civil Engineering purposes - Part 7: Shear strength tests (effective stress).

716. KS 999-9:2001 Methods of test for soils for Civil Engineering purposes - Part 9: In-situ tests. 717. KS ISO 12491:1997 Statistical methods for quality control of building materials and

components. 718. KS ISO 13786:1999 Thermal performance of building components - Dynamic thermal

characteristics - Calculation method. 719. KS ISO 140-1:1997 Acoustics - Measurements of sound insulation in buildings and of

building elements - Part 1: Requirements for laboratory test facilities with suppressed flanking transmission.

720. KS ISO 140-10:1991 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 10: Laboratory measurement of airborne sound insulation of small building elements.

721. KS ISO 140-12:2000 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 12: Laboratory measurements of room-to-room airborne and impact sound insulation of an access floor.

722. KS ISO 140-2:1991 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 2: Determination, verification and application of precision data.

723. KS ISO 140-3:1995 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 3: Laboratory measurements of airborne sound insulation of building elements.

724. KS ISO 140-4:1998 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 4: Field measurements of airborne sound insulation between rooms.

725. KS ISO 140-5:1998 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 5: Field measurements of airborne sound insulation of facade elements and facades.

726. KS ISO 140-6:1998 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 6: Laboratory measurements of impact sound insulation of floors.

727. KS ISO 140-7:1998 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 7: Field measurements of impact sound insulation floors.

728. KS ISO 140-8:1997 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 8: Laboratory measurements of the reduction of transmitted impact noise by floor coverings on a heavy standard

729. KS ISO 140-9:1985 Acoustics - Measurements of sound insulation in buildings and of building elements - Part 9: Laboratory measurements of room-to-room airborne sound insulation of a suspended ceiling with a plenum abov

730. KS ISO 15686-6:2004 Buildings and constructed assets- Service life planning Part 6:Procedures for considering environmental impacts


JULY 2017

of 30

731. KS ISO 15686-1:2000 Building and constructed assets - Service life planning - Part 1: General principles.

732. KS ISO 3443-1:1979 Tolerances for building - Part 1: Basic principles for evaluation and specification.

733. KS ISO 3443-2:1979 Tolerances for building - Part 2: Statistical basis for predicting fit between components having a normal distribution of sizes.

734. KS ISO 3443-3:1987 Tolerances for building - Part 3: Procedures for selecting target size and predicting fit.

735. KS ISO 3443-4:1986 Tolerances for building - Part 4: Method for predicting deviations for assemblies and for allocation of tolerances.

736. KS ISO 3443-5:1982 Building construction - Tolerances for building - Part 5: Series of values to be used for specification of telerances.

737. KS ISO 3443-6:1986 Tolerances for building - Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control - Method 1.

738. KS ISO 3443-7:1988 Tolerances for building - Part 7: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control - Method 2 (Statistical control meth

739. KS ISO 3443-8:1989 Tolerances for building - Part 8: Dimensional inspection and control of construction work.

740. KS ISO 3880-1:1977 Building construction - Stairs - Vocabulary - Part 1. 741. KS ISO 3881:1997 Building construction - Modular coordination - Stairs and stair openings -

Coordinating dimensions. 742. KS ISO 6241:1984 Performance standards in buildings - Principles for their preparation and

factors to be considered. 743. KS ISO 6513:1982 Building construction - Modular coordination - Series of preferred

multimodular sizes for horizontal dimensions. 744. KS ISO 6707-2:1993 Building and civil engineering - Vocabulary - Part 2: Contract terms. 745. KS ISO 6946:1996 Building components and building elements - Thermal resistance and

thermal transmittance - Calculation method. 746. KS ISO 7737:1986 Tolerances for building - Presentation of dimensional accuracy data. 747. KS ISO 8322-1:1989 Building construction - Measuring instruments - Procedures for

determining accuracy in use - Part 1: Theory. 748. KS ISO 8322-10:1995 Building construction - Measuring instruments - Procedures for

determining accuracy in use - Part 10: Difference between non-glass reflectors and electronic distance-measuring prisms (Traditional glas

749. KS ISO 8322-2:1989 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 2: Measuring tapes.

750. KS ISO 8322-3:1989 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 3: Optical levelling instruments.

751. KS ISO 8322-4:1991 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 4: Theodolites.

752. KS ISO 8322-6:1991 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 6: Laser instruments.

753. KS ISO 8322-7:1991 Building construction - Measuring instruments - Procedures for determining accuracy in use - Part 7: Instruments when used for setting out.

754. KS ISO 9052-1:1989 Acoustics - Determination of dynamic stiffness - Part 1: materials used under floating floors in dwellings.

755. KS ISO 9699:1994 Performance standards in buildings - Checklist for briefing - Contents of brief for building design.

756. KS ISO 15686-1:2011 Buildings and constructed assets - Service life planning-Part 1:General principles and framework

757. KNWA 2569-1: 2014 Hydraulic road binders part 1: Rapid hardening hydraulic road binders — Composition, specification and conformity criteria

758. KS 2259:2012 Integral cement waterproofing compounds – Specification 759. KS 2259:2012 Integral cement waterproofing compounds – Specification 760. KS 595-3:1986 Method of testing concrete - Part 3: Determination of compacting factor.


JULY 2017

of 30

761. KS 595-4:1986 Methods of testing concrete on site - Part 4: Alternative method of measuring workability (Compaction test).

762. KS 2338-1:2011 Analysis of wastewater for use in agriculture Part 1: The modified Bailenger method

763. KS 2338-3:2011 Analysis of wastewater for use in agriculture Part 3: Membrane filtration method

764. KS 2338-2:2011 Analysis of water for use in agriculture Part 2: MPN methods 765. KS 1494:2001 Code of practice for storage and on-site treatment of solid waste from

buildings. 766. KS 986:1999 Code of practise for the design, specification, installation and commissioning

of incineration plant for the destruction of hospital waste. 767. KS 772:1999 Glossary of terms relating to sanitation. 768. KS 2051-1:2007 Glossary of terms relating to water, sewage and industrial effluents - Part

1: Terms widely used in relation to water, sewage and industrial effluents. 769. KS 2051-2:2007 Glossary of terms relating to water, sewage and industrial effluents - Part

2: Terms widely used in relation to water supply and sewerage. 770. KS 985:1999 Methods for specifying purchaser's requirement for incineration plant for the

destruction of hospital waste 771. KS 984:1999 Methods of test and calculation for the perfomance of incineration plant for the

destruction of hospital 772. KS 1463:1999 Procedure for type testing of small domestic biological wastewater treatment

plants. 773. KS 2287-1:2011 Re use of treated wastewater Specification :Part 1: Irrigation 774. KS 548:1985 Specification for precast concrete pipes and fittings for drainage, sewerage

and culverts. 775. KS ISO 4997:1999 Specification for cold reduced steel sheet of structural quality. 776. KS 2287-1:2011 Reuse of treated wastewater Specification :Part 1: Irrigation 777. KS 2338-1:2011 Analysis of wastewater for use in agriculture Part 1: The modified

Bailenger method 778. KS 2338-2:2011 Analysis of water for use in agriculture Part 2: MPN methods 779. KS 2338-3:2011 Analysis of wastewater for use in agriculture Part 3: Membrane filtration

method 780. KS 1244:2010 Clay window sills - Specification. 781. KS 767:1989 Code of practice for laying clay flooring tiles 782. KS 742:1988 Code of practice for laying - Part 1: Roofing tiles. 783. KS ISO 3262-9:1997 Extenders for paints - Specifications and methods of test - Part 9:

Calcined clay. 784. KS ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal

structural junctions - Part 2: Geocomposites. 785. KS 680:1991 Glossary of terms relating to floor coverings 786. KS 1987:2006 Glossary of terms relating to structural clay products. 787. KS ISO 9652-4:2000 Masonry - Part 4: Test methods. 788. KS 1937-1:2006 Roofing tiles - Test methods - Part 1: Water absorption test. 789. KS 1937-2:2006 Roofing tiles - Test methods - Part 2: Permeability test. 790. KS 547:1983 Specification for burnt clay building blocks. 791. KS 766:1990 Specification for clay flooring tiles. 792. KS 831-2:2001 Specification for refractory bricks and shapes - Part 2: Insulating bricks and

shapes. WITHDRAWALS

793. KS 572:1986 Specification for hot-rolled structural steel sections To be replaced by KS 572:2017

794. KS 104:2014 Cold rolled steel sections — Specification To be replaced by KS 104:2017 795. KS 574:2015, Steel fabric for reinforcement of concrete — Specification To be replaced by

KS 574:2017 796. KS 2177:2009, Weld mesh — Specification To be replaced by KS 2177:2017

TRADE AFFAIRS DEPARTMENT


JULY 2017

of 30

CONFIRMATIONS 797. KS ISO 19092:2008 Financial services - Biometrics - Security framework. 798. KS ISO 8440:1986 Location of codes in trade documents. 799. KS ISO TR 13569:2005 Financial services - Information security guidelines. 800. KS ISO 15022-1: 2007 Securities- Scheme for messages (Data Field) 801. KS ISO 15022-2: 2007 Securities- Scheme for messages (Data Field) 802. KS ISO TR 17944: 2002 Banking- Security and other Financial Services- Framework for

Security in Financial Systems. 803. KS ISO 7982-1:1998 Messages communication - Funds transfer messages - Part 1:

Vocabulary and universal set of data segments and data elements for electronic funds transfer

804. KS ISO 8583-1:2003 Financial transaction card originated messages - Interchange message specifications - Part 1: Messages, data elements and code values

805. KS ISO 8583-2:1998 Financial transaction card originated messages - Interchange message specifications - Part 2: Application and registration procedures for Institution Identification Codes (IIC)

806. KS ISO 8583-3:2003 Financial transaction card originated messages - Interchange message specifications - Part 3: Maintenance procedures for messages, data elements and code values

807. KS ISO 13491-1:2007 Banking - Secure cryptographic devices (retail) - Part 1: Concepts, requirements and evaluation methods

808. KS ISO 9362:2009 Banking - Banking telecommunication messages - Bank identifier Codes 809. KS ISO 9564-2:2005 Banking - Personal Identification Number (PIN) management and

security - Part 2: Approved algorithms for PIN encipherment 810. KS ISO TR 9564-4:2004 Banking - Personal Identification Number (PIN) management and

security - Part 4: Guidelines for PIN handling in open networks 811. KS ISO 20022-1:2004 Financial services - Universal financial industry message scheme -

Part 1: Overall methodology and format specifications for inputs to and outputs from the KS ISO 20022 Repository

812. KS ISO 20022-2:2007 Financial services - Universal financial industry message scheme - Part 2: Roles and responsibilities of the registration bodies

813. KS ISOTS20022-3:2004 Financial services - Universal financial industry message scheme - Part 3: ISO 20022 modelling guidelines

814. KS ISOTS20022-4:2004 Financial services - Universal financial industry message scheme - Part 4: ISO 20022 XML design rules

815. KS ISOTS20022-5:2004 Financial services - Universal financial industry message scheme - Part 5: ISO 20022 reverse engineering

816. KS ISO 4217:2008 Codes for the representation of currencies and funds 817. KS ISO 16609:2004 Banking - Requirements for message authentication using symmetric

techniques FOOD AND AGRICULTURE DEPARTMENT CONFIRMATIONS

818. KS 1168:2011 Specification for food grade meat (beef ) extract 819. KS 2296:2011 Chicken eggs - Method for evaluation of quality 820. KS 2297:2011 Chicken essence 821. KS 2300:2011 chicks layers and broilers 822. KS 2302:2011 Transport of small and medium sized seed-eating birds -Code of practice 823. KS 2303:2011 Transport of live poultry- Code of practice 824. KS 2304:2011 Handling, processing, quality evaluation and storage of poultry-Code of

practice 825. KS 2305:2011 Ham- Specification 826. KS 2306:2011 Smoked bacon(pork)-Specification 827. KS 2307:2011 Animal casings- Specifications 828. KS 2309:2011 Handling, storage and transport of slaughter-house by-products-Guidelines 829. KS 2311:2011 Poultry -Glossary of terms 830. KS CAC/GL 78:2011 Guidelines for the control of campylobacter and salmonella in chicken

meat


JULY 2017

of 30

831. KS CAC/MISC-5:1993 The glossary of terms and definitions on residues of veterinary drugs in foods, First Edition

832. KS CAC/MRL-2:2011 Maximum residue limits for veterinary drugs in foods, First Edition 833. KS CAC/GL-71:2009 Guidelines for the design and implementation of national regulatory

food safety assurance programme associated with the use of veterinary drugs in food producing animals, First Edition

834. KS 2358:2012 Kenya Standard — Maize gluten meal — Specification, 835. KS 954:2012 Maize gluten feed — Specification 836. KS 785:2012 Bone meal — Specification 837. KS 2325:2012 Rabbit feed supplements —Specification 838. KS 1551-1-3:2001 Code of practice for handling and distribution of fresh fruits and fresh fruit

products 839. 2. KS1559:1999 Vocabulary in fresh fruit and vegetables. 840. 3. KS1560 2000 Code of general hygienic practice for the horticultural food industry 841. 4. KS 2090:2007- Handling of Ware potatoes-Code of practice 842. 5. KS ISO 1134:1993 Specification for pears - Guide to cold storage. 843. 6. KS ISO 2295:1974 Avocados - Guide for storage and transport. 844. 7. KS ISO 3513:1995 Chillies - Determination of scoville index. 845. 8. KS ISO 3631:1999 Citrus fruits - Guide to storage. 846. 9. KS ISO 4186:1980 Asparagus - Guide to storage. 847. 10. KS ISO 5565-1:1999 -Vanilla [Vanilla fragrans (Salisbury) Ames] - Part 1: Specification 848. 11. KS ISO 6660:1980 -Mangoes - Guide to storage. 849. 12 .KS ISO 6661:1999 -Fresh fruit and vegetable - Arrangement of parallelepipedic

packages in land transport vehicles. 850. 13. KS ISO 6663:1998 -Garlic - Cold storage. ISO 6662:1983 Plums - Guide to cold

storage. 851. 14. KS ISO 6665:1983 -Strawberries - Guide to storage. 852. 15. KS ISO 6949:1999 -Fruits and vegetables - Principles and techniques of the controlled

atmosphere method of storage. 853. 16. KS ISO 7302:1988 -Specification for cereals and cereal products - Determination of total

fat content. 854. 17. KS ISO 7560:1995 -Cucumbers - Storage and refrigerated transport. 855. 18. KS ISO 7561:1984 -Cultivated mushrooms - Guide to cold storage and refrigerated

transport. 856. 19. KS ISO 7560:1995 -Cucumbers - Storage and refrigerated transport. 857. 20. ISO 7922:1985 -Leeks - Guide to cold storage and refrigerated transport. 858. 21. KS ISO 8129-2:1999 Fruits, vegetables and derived products - Determination of

alcohol - Insoluble solids content - Part 2: Method for fresh or quick frozen peas. 859. 22. KS ISO 8683:1988 Lettuce - Guide to precooling and refrigerated transport. 860. 23. KS ISO 873:1980 Peaches - Guide to cold storage. 861. 24. KS ISO 931:1998 Guide to storage and transport for green bananas. 862. 25. KS ISO 972:1997 Chillies and capsicums, whole or ground ( powdered) – Specification 863. 26. KS 146 2011 cereals and pulses –Guide on storage

WITHDRAWALS 864. KS 456:2007 Dry beans specification (Replaced by EAS 46:2013) 865. KS 2135: 2011 Finger millet grains specification (Replaced by EAS 758: 2013 866. KS 136: 2007 Wheat grains specification (Replaced by EAS 51: 2013) 867. KS 2156: 2011dry green grams- specification (Replaced by EAS 331:2013)

868. KS 394:1983 Fresh green beans — Specification To be replaced by KS 394:2017 869. KS 787 :1989 Fresh okra — Specification To be replaced by KS 787:2017 870. 7KS 788:1987 Fresh strawberry — Specification, To be replaced by KS 788:2017 871. 8.KS 789:2006 Fresh bulb onions— Specification, To be replaced by KS 789:2017 872. KS 940:2006 Fresh head lettuce — Specification To be replaced by KS 940: 2017 873. KS 1046:1994 Fresh Asparagus — Specification To be replaced KS 1046:2017 874. KS 1050: 1994 Fresh whole carrots — Specification To be replaced KS 1050:2017 875. KS 1078: 1990 Fresh chillies — Specification To be replaced KS 1078:2017


JULY 2017

of 30

876. KS 1169: 2007 Fresh garden peas — Specification To be replaced by KS. 1169 :2017 877. KS 1298 :2006 Fresh bottle gourd (dudhi) — Specification To be replaced by KS

1298:2017 878. KS 1299 :2006 Fresh bitter gourd (karela) — Specification To be replaced by KS

1299:2017 879. KS 1300: 2006 Fresh ridged gourd (turia) — Specification To be replaced by KS 1300:2017 880. KS 1301 : 2006 Fresh ivy gourds (tindori) — Specification To be replaced by KS 1301:2017 881. KS 1543 :1999 Fresh cabbage — Specification To be replaced by KS 1543:2017 882. KS 1544 :2000 Fresh cauliflower — Specification To be replaced by KS 1544:2017 883. KS 317-1:1980 Specification for Carcasses and Meat Cuts for Bovine Meat – Beef and Veal

To be replaced by KS 317-1:2017 884. KS 317-2:1982 Specification for Carcasses and Meat Cuts for Ovine and Caprine meat –

Lamb and Mutton, Goat To be replaced by KS 317-2: 2017 EAC/COMESA DEPARTMENT CONFIRMATIONS

885. KS 1516:2000 Code of hygienic practice for the handling, processing, storage and the placing on the market of fish and fishery products

886. KS 1652:2000 Code of hygienic practice on commercial fishing vessels. 887. KS 1564:1999 Code of practice for the handling, processing, storage and distribution of

molluscan shellfish. 888. KS 425:2010 Dried prawns (shrimps) - Specification 889. KS EAS 62-2:2000 Fish handling, processing and distribution - Code of practice - Part 1:

Code of hygiene for the handling, processing, storage and placing of fish and fishery products.

890. KS EAS 62-1:2000 Fish handling, processing and distribution - Code of practice - Part 1: Fresh fish handling and processing.

891. KS 1565:2010 Frozen fillets of cuttle fish and tubes of squids - Specification 892. KS 1642:2010 Frozen tuna loin - Specification 893. KS 1715:2008 Smoked fish - Specification 894. KS 424:1986 Specification for dried salted fish. 895. 11. KS 1399-2:2012 Specification for fresh and frozen fin fish - Part 2: Fresh and frozen

fish fillet 896. KS 1399-1:2012 Specification for fresh fin fish - Part 1: Fresh and frozen whole fish. 897. KS 1285:2012 Specification for fresh frozen prawns / shrimps. 898. KS 1486:2012 Specification for frozen lobsters. 899. KS 1643:2012 Specification for frozen octopus. 900. KS 1754-1:2003 Test methods for fish and fishery products - Part 1: Collection and storage

of samples for analysis. 901. KS 1754-3:2003 Test methods for fish and fishery products - Part 3: Determination of

parasites in finfish by candling. 902. KS 1754-4:2003 Test methods for fish and fishery products - Part 4: Determination of total,

inorganic and organic mercury. 903. KS 1754-5:2003 Test methods for fish and fishery products - Part 5: Determination of

selenium. 904. KS 1754-7:2003 Test methods for fish and fishery products - Part 7: Determination of lead

by atomic absorption spectrophotometry. 905. KS 1754-8:2003 Test methods for fish and fishery products - Part 8: Determination of

organochlorides, pesticides, PCBS, and PCB congeners. 906. S ISO 12875: 2011 Traceability of finfish products Specification on the information to be

recorded in captured finfish distribution chains 907. KS ISO 12877: 2011 Traceability of finfish products Specification on the information to be

recorded in farmed finfish distribution chains 908. KS 1317:2007 Cereal based alcoholic beverages - Specification 909. KS 618:2007 Cider and perry - Specification. 910. KS 1499:2012 Code of practice for processing, handling and distribution of alcoholic

beverages. 911. KS 1447:2001 Specification for unmalted beer.


JULY 2017

of 30

912. KS 2150:2008 Spirit based ready to drink alcoholic beverage - Specification. 913. KS 2326:2011 Traditional spirit (Chang'aa) - Specification 914. KS 2196:2012 Liqueurs- Specification 915. KS 611:2007 Fruit wines – Specification

WITHDRAWALS

916. KS 1122:2007 Fortified wines - Specification. to be replaced with KS EAS 139:2013: Fortified wine-Speciation

917. KS 614:2007 Gin - Specification. to be replaced with KS EAS 145: 2013: Gin – Specification

918. KS 610:2001 Methods of test for alcoholic beverages (wines, spirits and brandies). to be replaced with KS EAS 104

919. KS 615:2007 Rum - Specification (Second Edition). to be replaced with KS EAS 146:2013 – Rum – Specification

920. KS 616:2007 Brandy - Specification to be replaced with KS EAS 143:2013: Brandy – Specification

921. KS 1315:1999 Specification for alcohometry tables. No replacement 922. KS 225:1996 Specification for beer. to be replaced with KS EAS 63: 2014-beer

specification 923. KS 608:2001 Specification for neutral spirit for manufacture of alcoholic beverages

(Second Edition). to be replaced with KS EAS 144: 2013: Neutral Spirit – Specification 924. KS 1041:1994 Specification for opaque beers. to be replaced with KS EAS 61: 2014 925. KS 1121:1994 Specification for sparkling wine. to be replaced with KS EAS 140:2013:

Sparkling wine – Specification, 926. KS 613:2007 Vodka – Specification to be replaced with KS EAS 142:2013 Vodka –

Specification, 927. KS 609:1990 Specification for still grape table wines to be replaced with KS EAS 138:2013:

Still Table wine 928. KS 612:2007 Whisky – Specification to be replaced with KS EAS 141:2013 Whisky –

Specification

LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY

Documents

Transcript of LIST FOR CONFIRMATIONS AND WITHDRAWALS APPROVED BY