LIQUID COOLED DIESEL ENGINES - kohlerpower.it · disegno eseguito con sistema cad pro engineer per...

LIQUID COOLEDDIESEL ENGINES

8.6 – 47.0 kW | 11.5 – 63 hp

WATER COOLEDDIESEL ENGINES

STANDARD EQUIPMENT

External spin-on type oil filter

Exhaust manifold

Intake manifold

Suction fan

Accelerator control

Electric starter motor and alternator 12V

Thermostat valve

Flywheel with ring gear

Fuel feeding mechanical pump

Coolant pump

Flanging backplate

Electric stop

Glow Plug Control Unit 12V

Fuel filter engine mounted

ACCESSORIES ON DEMAND

* Not on KDW502 model

Fan guard

Clutch flywheels

Bell housings and flywheels

Transmission adapters

Key panels 12V or 24V

Wiring harnesses

Radiators

Pushing fan

Engine feet

Fuel tanks

Silencers

Dry type air cleaners (engine mounted or loose)

Air intake cyclonic pre-cleaners

High capacity oil sumps*

Cab heating provision

Hydraulic pump adaptors

Vacuum pump adaptors

Electric fuel feeding pump

24V starter motor, glow plugs and alternator

Quick specifications

CYLINDERS 2

MAX POWER kW (hp)@rpm

8.6 (11.5) @ 3600

MAX TORQUE Nm@rpm

24.5 @ 2200

EMISSION COMPLIANCE

ECER 24

KDW502

(Power & torque N curve - 80/1269/CE E-ISO 1585)

PERFORMANCE CURVES(IFN-ACCORDING TO ISO 3046 and ISO 14396)

Dimensions (mm)

DATA

Power ratings refer to engines equipped with air filter, standard muffler, after running-in period at ambient conditions of +25°C, relative humidity 30% and 1 bar.Power drops by 1% every 100 m altitude and by 2% every 5°C above +25°C.

IL PRESENTE DISEGNO E GLI ELEMENTI IN ESSO CONTENUTI SONO PROPRIETA'IT THIS DRAWING AND ALL INFORMATIONS CONTAINED ARE PROPRIETARY DELLA LOMBARDINI S.r.l. E' VIETATO,A TERMINI DI LEGGE, RIPRODURLO O DOCUMENTS OF LOMBARDINI S.r.l.; NO TRANSMISSION OR REPRODUCTIONENRENDERLO COMUNQUE NOTO A TERZI SENZA NOSTRA AUTORIZZAZIONE SCRITTA. ARE PERMITTED WITHOUT WRITTEN AGREEMENT WITH LOMBARDINI S.r.l.

ESP. MODIFICA "MAT"CORRENTE DISEGNATORE DATAREV. MODIFICATION CURRENT "MAT" DESIGNER DATEMOTORE-ENGINE N -NR DESCRIZIONE-DESCRIPTION "MAT"IN.- ORIGIN. DISEGN.- DESIGNER DATA- DATE

SCALA- SCALE RISERVATO A:- RISERVED TO:R&D Dept.

A1

MATERIALE- MATERIAL RESIST- T.STRENGTH[N/mm2] MATRICOLA - PART NUMBER

TRATT.TERMICO-HEAT TREATMENT PROFONDITA'-DEPTH[mm] DUREZZA-HARDNESS

SIZ

E U

NI

TR.SUPERF./RIVESTIMENTO-SURFACE TREAT./COATING PROF/SP-DEPTH/THICK MASSA-MASS[kg](density)

-

[mm] A1

DISEGNO ESEGUITO CON SISTEMA CAD Pro ENGINEER PER LE QUOTE MANCANTI RIFERIRSI AL MODELLO CAD 3DIT DRAWING FROM CAD SYSTEM - NO MANUAL MODIFICATION ALLOWED

REFER TO 3D MODEL FOR MISSING DIMENSIONSENTOLLERANZE GENERALI SECONDO SPECIFICA LOMBARDINI 3561-026 GENERAL TOLLERANCE ACCORDING TO LOMBARDINI SPEC. 3561-026

LEGENDA CRITICITA': vedi Procedura Lombardini PSQ 4 E Sicurezza Critico Importante NormaleCRITICALITY LEGEND: according to Lombardini Procedure PSQ 4 E Security Critical Important Normal F

OR

MA

TO

UN

I

ASSEM : 3168_030_LDW502_STD_IND_NEW 0 10 20 30 40 50 60 70 80 90 100

LDW502 LDW502 PRESSOFUSO INDUSTRIALE 0 GUALDI 05/10/12

TAVOLA: 1/1 2:5 R:01 V:0+

0107.003168.958.01.0

0.000 (0.0)

0

Specifiche tecnicheTechnical specifications

3561-026

-

137 117

88 88102 102

211.5387

160

1258

426

66 10

203 158183

150

340

490

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I



TAVOLA: 1/1 2:5 R:01 V:0+

0107.003168.958.01.0

0.000 (0.0)

0


3561-026

-

137 117

88 88102 102

211.5387 426

66 10

203 158183

150

340

490

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I



TAVOLA: 1/1 2:5 R:01 V:0+

0107.003168.958.01.0

0.000 (0.0)

0


3561-026

-

426

66 10

203 158183

1630

166 169.6

8 holesM 8x1.25

1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800

kW HP

260

280

300

320

340

18.0

20.0

22.0

24.0

26.0

4.0

4.5

5.0

5.5

6.0

6.5

7.0

7.5

8.0

8.5

9.0

5.0

6.0

7.0

8.0

9.0

10.0

11.0

12.0

1.8

2.0

2.2

2.4

2.6

195

215

235

255

r.p.m.

kgm Nm

g/HPh g/kWh

N

NA

MB

NB

C

N - Power curve - 80/1269/CE E-ISO 1585

NB - Power curve - ISO 3046/1 -IFN

NA - Power curve - ISO 3046/1 - ICXN

MB - Torque curve - (NB curve)

C - Specific fuel consumption - (NB curve)


CYLINDERS 2 2 2


11.5 (15.4) @ 3600 11.5 (15.4) @ 3600 11.6 (15.5) @ 3600

MAX TORQUE Nm@rpm

40.5 @ 2000 30.5 @ 2600 38 @ 2200

EMISSION COMPLIANCE

ECE R 24 US TIER 4 FINAL EU STAGE V#

KDW702

#Available starting from 2019


Dimensions (mm)

Other available settings

DATA



NB - Power curve - ISO 3046/1 - IFN




1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800

kW HP

250

270

290

310

330

30.0

32.0

34.0

36.0

38.0

40.0

5.0

6.0

7.0

8.0

9.0

10.0

11.0

12.0

13.0

14.0

7.0

8.0

9.0

10.0

11.0

12.0

13.0

14.0

15.0

16.0

17.0

18.0

19.03.2

3.4

3.6

3.8

4.0

190

210

230

250

r.p.m.

kgm Nm

g/HPh g/kWh

N

NA

MB

NB

C

Max Power N* (kW)@rpm Max Torque (Nm)@rpm

10.5 @ 3000 38.5 @ 2200




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_875_LDW702_STD 0 10 20 30 40 50 60 70 80 90 100

LDW 702 Ingombro motore completo standard 0 Gualdi 05/09/12

- TAVOLA: 1/1 2:5 R:03 V:2

0174.003168.875.03.0

0.000 (0.0)

0


3561-026

-

137 117

88 88102 102

242.5412

186

1258

424

66 10

203 158183

146

373

519

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_875_LDW702_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:03 V:2

0174.003168.875.03.0

0.000 (0.0)

0


3561-026

-

137 117

88 88102 102

242.5412 424

66 10

203 158183

146

373

519

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_875_LDW702_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:03 V:2

0174.003168.875.03.0

0.000 (0.0)

0


3561-026

-

424

66 10

203 158183

1630

166 169.6

8 holesM 8x1.25


CYLINDERS 3 3 3


18.6 (24.9) @ 3600 17.7 (23.7) @ 3600 18.8 (25.2) @ 3600

MAX TORQUE Nm@rpm

67 @ 2000 50 @ 2600 62 @ 2200

EMISSION COMPLIANCE


KDW1003



Dimensions (mm)

DATA










A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_876_LDW1003_STD 0 10 20 30 40 50 60 70 80 90 100

LDW1003 Ingombro motore completo standard 0 Gualdi 25/09/12

- TAVOLA: 1/1 2:5 R:00 V:7

0175.003168.876.00.0

0.000 (0.0)

0


3561-026

-

137 117

88 88102 102

242.5412

186

1258

516

66 10

286 158266

146

373

519

1630

166 169.6

8 holesM 8x1.254 holes

M 12x1.75




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_876_LDW1003_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:00 V:7

0175.003168.876.00.0

0.000 (0.0)

0


3561-026

-

137 117

88 88102 102

242.5412 516

66 10

286 158266

146

373

519

1630

166 169.6

8 holesM 8x1.254 holes

M 12x1.75




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_876_LDW1003_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:00 V:7

0175.003168.876.00.0

0.000 (0.0)

0


3561-026

-

516

286 158266

1630

166 169.6

8 holesM 8x1.25

1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800

kW HP

230

250

270

290

50.0

55.0

60.0

65.0

70.0

8910111213141516171819202122

11

13

15

17

19

21

23

25

27

295.0

5.5

6.0

6.5

7.0

175

195

215

235

r.p.m.

kgm Nm

g/HPh g/kWh

N

NA

MB

NB

C



16.2 @ 3000 59 @ 2000

13.5 @ 2500 57.5 @ 1700


CYLINDERS 4 4 4


24.5 (33.3) @ 3600 17.9 (24.3) @ 2700 18.4 (24.3) @ 3000

MAX TORQUE Nm@rpm

84 @ 2000 70 @ 1600 70 @ 1600

EMISSION COMPLIANCE


KDW1404


PERFORMANCE CURVES(IFN-ACCORDING TO ISO 3046 and ISO14396)

Dimensions (mm)

DATA










A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_877_LDW1404_STD 0 10 20 30 40 50 60 70 80 90 100

LDW 1404 Ingombro motore per Brochure 0 Gualdi 01/10/12

- TAVOLA: 1/1 2:5 R:04 V:2+

0176.003168.877.04.0

0.000 (0.0)

0


3561-026

-

412243

137 117

88 88102 102

186

1258

599

66 10

369 158349

146

373

519

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_877_LDW1404_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:04 V:2+

0176.003168.877.04.0

0.000 (0.0)

0


3561-026

-

412243

137 117

88 88102 102

599

66 10

369 158349

146

373

519

1630

166 169.6

4 holesM 12x1.75

8 holesM 8x1.25




A1



SIZ

E U

NI


-

[mm] A1




OR

MA

TO

UN

I

ASSEM : 3168_877_LDW1404_STD 0 10 20 30 40 50 60 70 80 90 100


- TAVOLA: 1/1 2:5 R:04 V:2+

0176.003168.877.04.0

0.000 (0.0)

0


3561-026

-

599

369 158349

1630

166 169.6

8 holesM 8x1.25

1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800

kW HP

230

250

270

290

310

60.0

65.0

70.0

75.0

80.0

10.0

11.5

13.0

14.5

16.0

17.5

19.0

20.5

22.0

23.5

25.0

26.5

14

16

18

20

22

24

26

28

30

32

34

36

6.0

6.5

7.0

7.5

8.0

175

195

215

235

r.p.m.

kgm Nm

g/HPh g/kWh

N

NA

MB

NB

C



21.8 @ 3000 77.5 @ 1900

18 @ 2500 76 @ 1600


CYLINDERS 3 3 3


27.6 (40.1) @ 3000 29 (38.9) @ 3000 18.4 (24.7) @ 3000

MAX TORQUE Nm@rpm

106.5 @ 1600 104 @ 1650 100 @ 1600

EMISSION COMPLIANCE

ECE R 24 US TIER 4 INTERIM EU STAGE V#

KDW1603



Dimensions (mm)

DATA









27.6 @ 2500 103 @ 1650

573

468

center of gravity

231

633

171

r.p.m.

1400 1800 2200 2600 3000

g/kWh

250

270

290

310

330

g/CVh

190

210

230

250

kW

10

13

16

19

22

25

28

31

34

CV

15

18

21

24

27

30

33

36

39

42

45

kW

10

13

16

19

22

25

28

31

34

CV

15

18

21

24

27

30

33

36

39

42

45

kW

10

13

16

19

22

25

28

31

34

CV

15

18

21

24

27

30

33

36

39

42

45

Nm

78

86

94

102

110

kgm

8

8.8

9.6

10.4

11.2

C

NA

NB

N

MB


CYLINDERS 4 4


34.5 (46.9) @ 3000 36.6 (49) @ 3000

MAX TORQUE Nm@rpm

144 @ 2000 132.5 @ 2100

EMISSION COMPLIANCE

ECE R 24 US TIER 4 INTERIM

KDW2204


Dimensions (mm)

DATA









35 @ 3000 130 @ 2100

673

468

center of gravity

231

633

171

g/kWh

250

270

290

310

330

g/CVh

190

210

230

250

Nm

95

105

115

125

135

kgm

10

11

12

13

14kW

15

18

21

24

27

30

33

36

39

42

CV

22

25

28

31

34

37

40

43

46

49

52

55

r.p.m.

1400 1800 2200 2600 3000

NA

NB

MB

C


CYLINDERS 4 4


44.3 (60.2) @ 3000 46 (61.6) @ 3000

MAX TORQUE Nm@rpm

190 @ 1800 178 @ 1700

EMISSION COMPLIANCE

ECE R 24 US TIER 4 INTERIM

KDW2204T


Dimensions (mm)

DATA









44 @ 3000 176 @ 1700

695

468

center of gravity

235

661

233

center of gravity

r.p.m. 1400 1800 2200 2600 3000

g/kWh

250

270

290

310

330

g/CVh

190

210

230

250

Nm

125

140

155

170

185

kgm

13 14

16 17

19

kW

18

22

26

30

34

38

42

46

50

54

CV

27

32

37

42

47

52

57

62

67

N

NA

C

NB

MB

KDW 502

APPLICATIONS SPECS

V belt

D2 (mm) ≥ 116 [191 + l2(mm)]N (kW)

n (rpm)

Max intermittent axial load in both directions A-B= 300 kg

Minimum pulley diameters for belt drive

C - Zone in which the radial loads can be applied

CoggeD belt

D1 (mm) ≥ 89 [191 + L1(mm)]N (kW)

n (rpm)

KDW 1404

KDW 1603

KDW 2204/ KDW 2204T

KDW 1003

Max intermittent axia l load in both direct ions A-B= 300 kg

Minimum pul ley diameters for belt dr ive

C - Zone in which the radial loads can be appl ied

Co g g e D b e l t

D1 (mm) ≥ 99 [101 + L1(mm)]N (kW)

n ( rpm )

V b e l t

D2 (mm ) ≥ 143 [101 + l2(mm ) ]N (kW)

n ( rpm )




V b e l t

D2 (mm ) ≥ 114 [101 + l2(mm ) ]N (kW)

n ( rpm )

Co g g e D b e l t

D1 (mm) ≥ 79 [101 + L1(mm)]N (kW)

n ( rpm )










Co g g e D b e l t

D1 (mm) ≥ 72 [101 + L1(mm)]

Co g g e D b e l t

D1 (mm) ≥ 49 [118 + L1(mm)]

Co g g e D b e l t

D1 (mm) ≥ 46 [118 + L1(mm)]

N (kW)

N (kW)

N (kW)

n ( rpm )

n ( rpm )

n ( rpm )

V b e l t

D2 (mm ) ≥ 110 [101 + l2(mm ) ]

V b e l t

D2 (mm ) ≥ 76 [118 + l2(mm ) ]

V b e l t

D2 (mm ) ≥ 73 [118 + l2(mm ) ]

N (kW)

N (kW)

N (kW)

n ( rpm )

n ( rpm )

n ( rpm )

KDW 702

AVAILABLE FLANGES*

52

R9

48°

45°

52

R9

45°

45°45°

48°

46°

37°

30° 30°

151

160

134

R48

R130

R40

Ø300Ø276Ø105

45°

R40

37°

23°

49.8

60 597126

Ø23

3

Ø32

Ø14

0 +0

.04

23 21 22H

H0.12

H0.16

80 80

22°30’

45°

S

45°

P

22°30’

45°

±O.1180 ±O.1180

180

56 4

25

60°

30°

30°

60°

Ø356Ø333.4Ø200

H0.26

H0.20

H0.12H0.30

20

6

12

15

23 21 11 45.2 30.2±0.6

1860 130.4

190.4

Ø18

4.2

Ø21

5.9

0 +0.1

27

Ø31

4.32

5 0 +0

1

Ø22

7

H

72

11

20

1666

.7

50.8 42.8

R2

144012

Ø0.05

Ø0.20

Ø0.40

Ø0.40

Ø0.40

Ø0.40

Ø0.40

Flange standard type KDW 502 / KDW 702 / KDW 1003 / KDW 1404 Standard version

Sta

ndar

d v

ersi

on

- K

DW

502

/ K

DW

702

/ K

DW

100

3 /

KD

W 1

404

Vers

ion

Gen

set

- K

DW

502

/ K

DW

702

/ K

DW

100

3 /

KD

W 1

404

Cylin

der

axis

3/8”-16UNC-2B 4 holes

7 holes Ø9

8 holes M10X1.5 - 6H

2 holes Ø6 - D8

Flange Genset KDW 502 / KDW 702 / KDW 1003 / KDW 1404 Standard version

6 holes 5/1618 UNC-2B

4 holes M 8X1.25

SEEN FROM “S”

SEEN FROM “P”

8 holes M 12X1.75

Engine axis

3 for RIBS

* Other f langes avai lable on request

TECHNICAL SPECIFICATIONSModel KDW 502 KDW 702

Engine specs

4 stroke diesel engine with cylinder in line • •

Liquid cooled • •

Indirect injection with injector pump on head • •

Overhead camshaft belt driven • •

Double PTO on crankshaft • •

3rd PTO on the distribution • •

Counterclockwise rotation (1st PTO) • •

Forced lubrication with vane pump on the crankshaft • •

Full flow external oil filter • •

Coolant pump in the engine block • •

Automatic extra fuel starting device • •

Centrifugal governor • •

Torque adapter • •

Aluminum cylinder head • •

Cast iron engine block with re-borable integral liners - •

Die-cast aluminum engine block with reinforced structure • -

2 valves per cylinder • •

Closed crankcase ventilation system • •

Cab heater provision • -

Technical features

Cylinder 2 2

Bore (mm) 72 75

Stroke (mm) 62 77.6

Engine displ (cm3) 505 686

Injection system IDI IDI

Compression ratio 22.8:1 22.8:1

Performance

Emission compliance ECE R 24 ECE R 24

US TIER 4 FINAL

EU STAGE

v#

Rating (kW/HP): N (80/1269/CEE)ISO 1585 NB ISO 3046 IFN NA ISO 3046 ICXN

8.6 /11.5 8.0 /10.7 7.3/ 9.8

(@ 3600) 12.5 /16.811.5 /15.4 10.7 /14.3

(@ 3600) -

11.5/15.4-

(@ 3600) -

11.6/15.5-

Max torque (Nm@rpm) 24.5 @ 2200 40.5 @ 2000

30.5 @ 2600

38 @ 2200

Min idling speed (rpm) 900 900

Fuel compatibility

UNI EN 590-2010 • •

No 1 Diesel (US) - ASTM D 975-09 B - Grade 1-D S 15 • •




ARCTIC EN 590/ASTM D 975-09 B • •

High Sulfur Fuel < 5000 ppm (< 0.5%) • •

High Sulfur Fuel > 5000 ppm ( > 0.5%) • •

Military NATO Fuels F34 - F35 - F44 - F63 - F64 - F65 * • •

Military US Fuels JP5 - JP8 (AVTUR) * • •

Jet Fuel -Jet A/ A1* • •

Service features

Standard oil sump capacity (l) 1.4 1.6

Oil consumption (kg/h) 0.007 0.009

Oil change interval std/synthetic (hr) 150** 250**

Oil filter change interval std/synthetic (hr) 150** 250**

Physical characteristics

H × L × W (mm) 490 × 426 ×387 519 × 424 ×412

Dry weight (kg) 54 66

Ambient operating temps (°C) -15 +50*** -15 +50***

Gradeability-all round (intermittent -30 min) (deg) 25 25

Gradeability-all round (peak value -1 min) (deg) 35 35

Cap. of air required for correct combustion @3600 (l/min) 910 1240

Cap. of air required for correct cooling @3600 (m3/min) 65 (1:1.23) 65 (1:1.23)

Lubrication Oil type SAE 5W 40 / API SJ/CF4 SAE 5W 40 / API SJ/CF4

Auxiliary PTOs(3rd optional)

Max torque (Nm) - 37.0 @ 1800 rpm

Drive ratio 0.5:1 0.5:1

* With restrictions ** According to operating conditions *** -32° on demand # Available starting from 2019

Model KDW 1003 KDW 1404

Engine specs

4 stroke diesel engine with cylinder in line • •

Liquid cooled • •

Indirect injection with injector pump on head • •

Overhead camshaft belt driven • •

Double PTO on crankshaft • •

3rd PTO on the distribution • •

Counterclockwise rotation (1st PTO) • •

Forced lubrication with vane pump on the crankshaft • •

Full flow external oil filter • •

Coolant pump in the engine block • •

Automatic extra fuel starting device • •

Centrifugal governor • •

Torque adapter • •

Aluminum cylinder head • •

Cast iron engine block with re-borable integral liners • •

Die-cast aluminum engine block with reinforced struc-ture - -

2 valves per cylinder • •

Closed crankcase ventilation system • •

Cab heater provision - -

Technical features

Cylinder 3 4

Bore (mm) 75 75

Stroke (mm) 77.6 77.6

Engine displ (cm3) 1028 1372

Injection system IDI IDI

Compression ratio 22.8:1 22.8:1

Performance

Emission compliance ECE R 24

US TIER 4 FINAL

EU STAGE

V#ECE R

120US TIER 4

FINALEU

STAGE V#

Rating (kW/HP): N (80/1269/CEE)ISO 1585 NB ISO 3046 IFN NA ISO 3046 ICXN

(@ 3600) 20.0 /26.8 18.6 /24.9 17.0 /22.8

(@ 3600) -

17.7 /23.7 -

(@ 3600) -

18.8 /25.2 -

(@ 3600) 26.0 /35.2 24.5 /33.3 22.4 /30.5

(@ 2700) -

17.9 /24.3 -

(@ 3000) -

18.4 /24.3 -

Max torque (Nm@rpm) 67.0 @ 2000

50.0 @ 2600

62.0 @ 2200

84.0 @ 2000

70.0 @ 1600

70.0 @ 1600

Min idling speed (rpm) 900 900

Fuel compatibility

UNI EN 590-2010 • •





ARCTIC EN 590/ASTM D 975-09 B • •

High Sulfur Fuel < 5000 ppm (< 0.5%) • •

High Sulfur Fuel > 5000 ppm ( > 0.5%) • •

Military NATO Fuels F34 - F35 - F44 - F63 - F64 - F65 * • •

Military US Fuels JP5 - JP8 (AVTUR) * • •

Jet Fuel -Jet A/ A1* • •

Service features

Standard oil sump capacity (l) 2.4 3.2

Oil consumption (kg/h) 0.0013 0.0017

Oil change interval std/synthetic (hr) 250** 250**

Oil filter change interval std/synthetic (hr) 250** 250**

Physical characteristics

H × L × W (mm) 519 × 516 ×412 519 × 599 ×412

Dry weight (kg) 85 98

Ambient operating temps (°C) -15 +50*** -15 +50***

Gradeability-all round (intermittent -30 min) (deg) 25 25

Gradeability-all round (peak value -1 min) (deg) 35 35

Cap. of air required for correct combustion @3600 (l/min) 1850 2470

Cap. of air required for correct cooling @3600 (m3/min) 80 (1:1) 115 (1:1)

Lubrication Oil type SAE 5W 40 API SERVICE CF SAE 5W 40 API SERVICE CF


Max torque (Nm) 37.0 @ 1800 rpm 37.0 @ 1800 rpm

Drive ratio 0.5:1 0.5:1

* With restrictions ** According to operating conditions *** -32° on demand # Available starting from 2019

Model KDW1603 KDW2204 KDW2204T

Engine specs

4 stroke diesel engine with cylinder in line • • •

Liquid cooled • • •

Indirect injection • • •

Gear driven in cranckcase camshaft w.pushrod, rocker arm and hydraulic lash adjuster • • •

Double PTO on crankshaft • • •

Two PTOs on the distribution • • •

Counterclockwise rotation (1st PTO) • • •

Forced lubrication with vane pump on the crankshaft • • •

Full flow external spin-on oil filter • • •

Automatic extra fuel starting device • • •

Centrifugal governor • • •

Torque adapter • • •

Cast iron cylinder head • • •

Cast iron engine block with re-borable integral liners • • •

Closed crankcase ventilation system • • •

Cab heater provision • • •

Technical features

Cylinder 3 4 4

Bore (mm) 88 88 88

Stroke (mm) 90.4 90.4 90.4

Engine displ (cm3) 1649 2199 2199

Injection system IDI IDI IDI

Compression ratio 22:1 22.5:1 22.8:1

Performance

Emission compliance ECE R 24

US TIER 4 Interim

EU STAGE

V#ECE R

24US

TIER 4 Interim

ECE R 24

US TIER 4 Interim

Rating (kW/hp): N (80/1269/CEE)ISO 1585 NB ISO 3046 IFN NA ISO 3046 ICXN

(@3000) 29.5 /40.1 27.6 /37.5 25.4 /34.5

(@3000) -

29.0/ 38.9 -

(@3000) -

18.4/ 24.7 -

(@3000) 37.5 /51.0 34.5 /46.9 32.0 /44.0

(@3000) -

36.6 / 49 -

(@3000) 47.0 /63.0 44.3 /60.2 40.8 /55.5

(@3000) -

46 / 61.6 -

Max torque (Nm@rpm) 106.5 @ 1600

104 @ 1650

100 @ 1600

144 @ 2000

132.5 @ 2100

190@ 1800

178 @ 1700

Min idling speed (rpm) 900 900 900

Fuel compatibility

UNI EN 590-2010 • • •

No 1 Diesel (US) - ASTM D 975-09 B - Grade 1-D S 15 • • •




ARCTIC EN 590/ASTM D 975-09 B • • •

High Sulfur Fuel < 5000 ppm (< 0.5%) • • •

High Sulfur Fuel > 5000 ppm ( > 0.5%) • • •

Military NATO Fuels F34 - F35 - F44 - F63 - F64 - F65 * • • •

Military US Fuels JP5 - JP8 (AVTUR) * • • •

Jet Fuel -Jet A/ A1* • • •

Service features

Standard oil sump capacity (l) [w. With dynamic balancer] 4.4 6.4 [5.3] 6.4 [5.3]

Oil consumption (kg/h) 0.019 0.025 0.032

Oil change interval std/synthetic (hr) 200** 200** 200**

Oil filter change interval std/synthetic (hr) 200** 200** 200**

Physicalcharacteristics

H × L × W (mm) 633 x 573 x 468 633 x 673 x 468 661 x 695 x 468

Dry weight (kg) 156 192 197

Ambient operating temps (°C) -15 +50*** -15 +50*** -15 +50***

Gradeability-all round (intermittent -30 min) (deg) 30 30 30

Gradeability-all round (peak value -1 min) (deg) 35 35 35

Cap. of air required for correct combustion @3000 (l/min) 2475 3300 4200

Cap. of air required for correct cooling @3000 (m3/min) 96 128 180

Lubrication Oil type SAE 5W 40 / API CF - SH SAE 5W 40 API CF - SH

SAE 5W 40 API CF - SH


Max torque (Nm) 39.2 @3000 39.2 @3000 39.2 @3000

Drive ratio 1:1 1:1 1:1

TECHNICAL SPECIFICATIONS

* With restrictions ** Depending on end application *** -32° on demand # Available starting from 2019

DEUTSCHLANDLombardini Motoren GmbHFritz-Klatte-Str. 6, Bürogebäude 265933 Frankfurt am Main, DEUTSCHLANDT. +49-(0)[email protected]

EUROPELombardini SrlVia Cav. del lavoro A. Lombardini n° 2 42124 Reggio Emilia, ITALYT. +39-(0)522-389-1 [email protected]

FRANCELombardini France S.a.s.47 Allée de Riottier,69400 Limas, FRANCET. +33-(0)[email protected]

ROAPACKohler Singapore Pte Ltd(Kohler Power Systems)7 Jurong Pier RoadSINGAPORE 619159T. [email protected]

UKLombardini U.K. Ltd1, Rochester Barn - Eynsham RoadOX2 9NHOxford, UKT. +44-(0)[email protected]

ESPAÑALombardini ESPAÑA, S.L.P.I. Cova Solera 1-908191 - Rubí (Barcelona)ESPAÑAT. +34-(0)[email protected]

Lombardini s.r.l. is a company of Kohler Group and has manufacturing facilities in Italy, Slovakia and India and sales subsidiaries in France,Germany, UK, Spain and Singapore.

Kohler reserves the right to make modifications without prior notice.For the latest version please visit our website:

KOHLERENGINES.COM/EU Printed in Italy ED0035584880 Rev.08 10/17 Eng KOHLER CO.

LIQUID COOLED DIESEL ENGINES - kohlerpower.it · disegno eseguito con sistema cad pro engineer per...

Documents

Transcript of LIQUID COOLED DIESEL ENGINES - kohlerpower.it · disegno eseguito con sistema cad pro engineer per...