Linux Application Virtualization with UDS Enterprise · Linux application virtualization with UDS...
Transcript of Linux Application Virtualization with UDS Enterprise · Linux application virtualization with UDS...
Linux application virtualization with UDS Enterprise
Versión 2.2.1 Rev. 1
February 26th, 2019
36
Page 1 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Introduction ................................................................................................................... 2
Necessary elements ..................................................................................................... 3
1. Virtualization platform ......................................................................................... 3
2. Image of Linux OS ............................................................................................. 3
3. X2Go protocol .................................................................................................... 3
4. UDS Actor .......................................................................................................... 4
5. Miscellaneous .................................................................................................... 4
Configuring the Linux template and the connection client ............................................. 5
Linux OS ................................................................................................................... 5
X2Go Protocol - Server ............................................................................................. 7
UDS Actor for Linux ................................................................................................... 8
X2Go Protocol – Connection client .......................................................................... 13
Service publication ...................................................................................................... 19
Accessing Linux application services .......................................................................... 33
About VirtualCable ...................................................................................................... 35
36
Page 2 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Introduction
The VDI and vApp UDS Enterprise connection broker allows the deployment and
administration of virtualized Linux application sessions through the X2Go connection
protocol. These applications may be assigned to user groups.
The access to the sessions of virtual applications Linux can be realized through clients
of connection with Windows OS and Linux.
The users will execute the applications in independent Linux virtual machines
autogenerated by UDS Enterprise, based on a template machine (where the
applications must be installed). If the same user accesses several applications, all
those applications will be executed in the same virtual desktop, thus achieving an
important optimization of resources.
For the correct operation and integration of UDS Enterprise with X2Go it is necessary
to perform a series of tasks that are detailed in this document.
36
Page 3 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Necessary elements
To make the configuration of the different elements that will make up the base machine
(template) to be used with UDS Enterprise to serve virtual applications, we will need:
1. Virtualization platform
It is necessary to have a virtualization platform that integrates with UDS Enterprise so
that the connection broker can deploy self-generated virtual machines. These virtual
machines will be the ones that will execute the applications for the different users.
The virtualization platforms supported by UDS Enterprise to be able to deploy Linux
applications are: Citrix XenSenver / XCP-ng, Microsoft Azure, Microsoft Hyper-V,
oVirt/RHEV, VMware vSphere, VMware vCloud, Nodeweaver, OpenNebula,
OpenStack, etc…
The virtual platform must have sufficient resources (vCPU, vRAM and disk) to be able
to run the Linux virtual desktops that will provide the virtual applications.
2. Image of Linux OS
This MV will be the one that UDS will use as a base machine (template) to deploy
virtual desktops in which users will run their virtual applications.
It is recommended to use an Ubuntu distribution as a template. In this example, we will
use a minimal image of Ubuntu 16.04, available from the official Ubuntu repository:
https://help.ubuntu.com/community/Installation/MinimalCD
3. X2Go protocol
The connection protocol that will allow us access to Linux applications will be X2Go.
The UDS Enterprise team have created a script that automates and simplify the entire
X2Go installation process. This script (we have generated one for the server part,
which we installed in the server template, and another for the client part of Linux
equipment, which is installed in the connection client) can be downloaded from this
repository:
http://images.udsenterprise.com/files/X2GO/
36
Page 4 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
4. UDS Actor
We will need to have the latest stable version of the UDS Actor to handle the
reconfiguration of all Linux virtual desktops automatically generated by the UDS
Server. To download the UDS Actor we will need to validate in the UDS login windows
with a user with administrator permissions. We will display the user´s menu and access
downloads. In this window we will download the Actor for Linux machines and
specifically for distributions based on Debian (.deb).
5. Miscellaneous
We need to have Internet access in the template machine in order to install both the
Ubuntu OS and the X2Go connection protocol.
It is also necessary to have a DHCP server in the network where the virtual desktops
are generated.
36
Page 5 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Configuring the Linux template and the
connection client
The following is a list of all the necessary tasks to be performed both on the Linux base
machine (template) and on the connection client (the computer that will access Linux
virtual applications).
Linux OS
We will start creating the VM that we will use as the base machine (template).
Once downloaded the minimal image of Ubuntu 16.04 from the official repository
indicated in the previous section, we proceed to perform its installation:
The installation will be done with the default values and indicating some resources
(disk, vRAM and vCPUs) according to the requirements of the applications that will be
installed on the machine.
When we get to the part of the installation wizard where it asks us to select the
programs to install, we will mark “Xubuntu desktop”. This option will install and
configure the XFCE desktop environment on our Ubuntu machine.
36
Page 6 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
In the case of the rest of the indicated data, we can leave the ones that come by
default. Once the installation in complete, we can access our operating system Ubuntu
16.04 + XCFE (Xubuntu 16.04).
Once the installation of the OS is finished, it is important to install the virtual machine
drivers corresponding to the virtualization platform. In this example we will install the
“open tools”, because it will run on VMware vSphere virtual platform.
sudo apt-get install open-vm-tools
36
Page 7 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
It is also recommended to disable automatic updates and, if you need to update the
OS, perform it manually.
X2Go Protocol - Server
Before proceeding with the installation of X2Go, we will need to update our
repositories:
sudo apt-get update
Once updated, we will proceed to the installation of X2Go (Server part) through the
script provided by VirtualCable (it is necessary to execute the script with a graphical
environment session running).
We copy the script to our Xubuntu template:
wget http://images.udsenterprise.com/files/X2GO/X2GO-server.sh
36
Page 8 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
We locate where we have downloaded the file.
We execute the file:
sudo sh /home/uds/X2GO-server.sh
When we have all the components installed, we can proceed with the installation of
X2Go on our connection client.
UDS Actor for Linux
We download the UDS Actor for distributions based on Debian.
36
Page 9 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
When downloading from the browser, we select it to be installed. The first window asks
us for the address of the UDS Enterprise Server. In the next window it will ask us for
information about the UDS Enterprise platform.
After finishing the installation and configuration of the UDS Actor, we verified that the
connection between the template and the UDS Server is working correctly.
In the event that the following blank data appears:
36
Page 10 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Enter the UDS Server IP address:
In the next field we will indicate the UDS Master Key. In order to find the value of this
field, we will have to login to the UDS portal with a user with administrator permissions.
In the side menu we enter in the tools section.
36
Page 11 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
We access the configuration submenu:
We enter the security tab:
36
Page 12 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The value that we have to enter is the one indicated in the Master Key field:
Once you have entered all the data, click on “Test Parameters” to verify that the data is
correct:
In case we need to modify some parameter, we can do it from this window or also by
editing the file: /etc/udsactor/udsactor.cfg
36
Page 13 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
X2Go Protocol – Connection client
Now we have to prepare the client from which we are going to make the connection.
We do not have to do this part in the template.
In the case that we have a Linux connection client, we will have to update the system:
sudo apt-get update
Once updated, we will proceed to the installation of X2Go in the client through the
script provided by VirtualCable (it is necessary to execute the script with a graphical
environment session running). We copy the script to our Linux client:
wget http://images.udsenterprise.com/files/X2GO/X2GO-client.sh
We locate the script and proceed with its execution:
In case of having a Windows client, we will have to download the X2Go client from the
following link: https://wiki.X2Go.org/doku.php
After clicking on the link, the executable will be downloaded.
36
Page 14 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
After finishing the download, we will execute the X2Go client installer. The first thing
that indicates is the language in which we will perform the installation:
We will have to accept the terms of the license of use by clicking in agreement:
We select the components to be installed. In our example, we will leave the ones that
come by default and click on “Next”:
36
Page 15 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
We select the route in which we want the installation to take place and click on “Next”:
Select the folder of the start menu where we want it to be added and click on “Install”:
36
Page 16 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
After finishing the installation, it will indicate that it was done correctly and click on
“Finish”:
36
Page 17 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Once the X2Go connection protocol is installed in our connection client, it is advisable
to prove that the connection can be made correctly. For this we will make a remote
connection from our client to the template previously configured.
In the “Host” field, enter the IP, of the computer to which we want to connect, in this
case the template.
In the “Login” field, enter the user name.
It is necessary to select XFCE as “Session type”.
We continue and proceed with the login page. We enter the password.
If the connection is successfully established and the remote dektop is displayed, X2Go
is working properly and thus it’s be able to virtualize applications.
36
Page 18 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
NOTE: In connection client computers, in addition to installing the X2Go client, it will
also be necessary to have the UDS client (UDS Plugin). For more details on its
installation, review the guide: UDS Enterprise Installation, UDS Enterprise installation,
Administration and User Manual available in the documentation section of the UDS
Enterprise website.
36
Page 19 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Service publication
Once we have prepared the Linux template (installed the OS, applications to virtualize,
X2Go protocol and UDS Actor) we will proceed to configure it in UDS and to create a
new service pool based on this template.
In order to configure a service pool and deploy Linux applications, we have to access
the UDS control panel with an administrator user.
The first thing we have to do is to register the base service that we have created in the
virtual platform. In this example, we will create it in a VMware vSphere environment, so
within the control panel we have to enter the services side menu:
In this example, from the list of services that we have registered, we select vCenter,
which is where we created the Linux template (if we do not have any service provider
registered, we will create a new one).
36
Page 20 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
We select it and in the Services tab click on the “New” button.
In the drop-down we select the type linked clone (which will help us make vary fast
deployments and save resources).
A pop-up window like the following will appear.
36
Page 21 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
For this type of provider (VMware vSphere) we have to assign an identifying name,
select the Datacenter, the resource pool where the clones will be published and in
which pool they will be created.
In the “machine” tab, we will have to select the base machine (template) Linux that we
have created previously (Xubuntu), as well as the memory that we want to give to the
autogenerated desktops, the network to which we want them to connect, the DNS
name of the desks, location and the length of the name. Once all this information is
completed, click on “Save”.
36
Page 22 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The next step is to register the authenticator that we are going to use in UDS
Enterprise. In the case of not having an external one (AD, OpenLDAP, etc…), we can
use the internal database provided by UDS Enterprise. To do this, in the side menu
select “Authenticators”:
In our case, we are going to use the internal database. To register this database, click
on the “New” button and select “Internal Database”.
The following window will open, where we will have to add an explanatory name to later
identify it in the platform, the priority of use and a tag name.
36
Page 23 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The next step will be to add the user groups that will be able to use the resources. To
do this we have to select the database, go down in the window and enter the “Groups”
tab.
Click on the “new” button, and in the drop-down menú, select “group”.
The following window will open, in which we will introduce the name of group, click on
the drop-down menu, leaving the status as active and click on “Save”.
36
Page 24 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
After creating the group, we will have to add users. For this, we enter the “Users” tab.
Click on the “New” button.
The following widow will appear, in which we will introduce the user´s name, password
and status, we will keep it as active. For this example it is not necessary to be a
member of the staff or administrator, so we will leave these buttons as “No”, and we will
add the group that we have created previously. Then click on “Save”.
36
Page 25 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The next step is to create the OS Manager. For this, in the side menu we have to go to
“Os Managers”.
Click on the “New” button.
In the drop-down select “Linux OS Manager”.
Enter a descriptive name and from the “Logout Action” drop-down select “Delete
service (non-persistent desktops)”. This option is recommended, since it allows that
when a user closes the application, the desktop on which the application is executed is
automatically deleted (important for the saving of resources of the virtual platform). It is
also possible to use persistent desktops to deploy Linux virtual applications.
36
Page 26 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The next step is to create the transport. This element is very important, because this is
where we are going to tell UDS to use the self-generated virtual desktops, based on
the Linux template machine, to deploy Linux virtual applications. To create a new
transport, in the side menu we will go to the “Connectivity” section.
In the transport section, we click on the “New” button.
In this configuration example, from the drop-down menu we select the “X2Go direct”
transport, because we are only use it from the local network. In case that the
connection is made from outside the local network we will have to use the tunnelled
X2Go protocol.
36
Page 27 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
The following window will appear, in which we will have to add the identifying name (it
is advisable to define here the name of the application, this name will be visible to the
user only in the case that several transports are define don the same pool resources)
and if we want to limit access. In our case, we will leave it by default, so that it can be
accessed from any device and network.
In the credentials tab, we indicate the user with which the application will be executed.
In our case we are going to use the user uds (this user must exist in the Ubuntu
template).
36
Page 28 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
In the “parameters” tab we will have to select UDS vAPP in the drop-down and
indicate the complete path of the application (installed in the Linux template) that
we want to execute.
In the “Advanced” tab, we introduce the keyboard language and in “Quality” we can
define the image quality (0 – 9), being predetermined by 6.
36
Page 29 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Once this configuration is done, click on “Save”.
NOTE: We can create as many transports as we need to publish applications for users.
Finally, we will have to create service pool. For this we go in the side menu to the
“Service Pools” section.
Click on the “New” button.
We indicate the name of the service (This name will be visible by the user and will help
you identify the service), select the base service and the OS Manager (previously
created).
36
Page 30 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
In the “Advanced” tab we leave the checks by default.
In the “Display” tab we indicate which group of services will be shown and which image
the application will use (these elements are created in the “Tools” section).
36
Page 31 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
In the “Availability” tab we will have to indicate the number of services that we want to
have available for the user´s connection (it is advisable to have as many services,
initial or in cache, as users are going to access the applications). Each user that
connects will need a desktop and on that desktop all the applications that we have
defined in the transports will be executed.
Once this configuration is done, click on “Save” to start the creation of the service
publication and the creation of the virtual desktops in which the virtual applications will
be delivered.
The next task will be to indicate which groups of users will access the virtual
applications service. In order to do this, go to “Groups” tab.
Click on “new”, select the authenticxator/group (previously created) and save.
Once the group is added, click on the “Transports” tab and assign the X2Go transport
(where we have defined the application route to be virtualized) that we have previously
created by clicking on “New”.
36
Page 32 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Select the transport and click on “Save”. We can add a single transport or more than
one per service pool.
Before connecting to an application, we must verify that the self-generated desktops by
UDS have been correctly configured. To do this, we will check in the “Cache” tab that
we have the services in a valid state.
36
Page 33 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
Accessing Linux application services
Once all these configurations have been made, verified that the Linux desktops have
autogenerated correctly and are in a valid state, users will be able to access the virtual
application service.
When the user accesses (they must have the X2Go client installed and the UDS client,
for Windows and Linux platform), the following icon will appear in the task bar:
And the application will open.
36
Page 34 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
In the case that we choose more than one application per service pool, we can select
the application to which we want to connect by clicking on the gear of the image:
And in the list we click on the application that we want to execute:
36
Page 35 of 35
Linux application virtualization with
UDS Enterprise
www.udsenterprise.com
About VirtualCable
VirtualCable markets UDS Enterprise through a subscription model, including support
and updates, depending on the number of users.
In addition, VirtualCable offers professional services to install and configure UDS
Enterprise and other virtualization technologies.
For more information, visit www.udsenterprise.com or send us an email to
info@udsenterprise.