LinTec
-
Upload
benztooling -
Category
Engineering
-
view
107 -
download
0
Transcript of LinTec
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
BENZ LinTecPush Type Broaching
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Push Type Broaches
LinS AxialBroaches
LinA RadialBroaches
LinA Haas Axial Broach
LinA EMAGAxial Broach LinA Axial
Broach for Machining
Centers
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinTech Broach Applications
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA Axial & Radial Broach Benefits• For Economic Manufacturing of Keyways, Positioned
ID and OD Splines, Gears, Spur Gears as Well as Special
Profiles and Geometric Free Forms (Rough and Finish Work)
• Machine ID and OD Features with the Same Tool Easily
by Reversing Turret Spindle Direction
• Dramatic Reduction of Machine Cycle Times – Improved Processes
• Reduction of Set-Up Time and Cost Savings From Complete
Manufacturing of Parts in One Setup
• Equipment Savings – Wear Reduction
• Serviced in Charlotte, NC
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA Axial & Radial Broach Characteristics• Designed with Continuous Lubricated Roller Bearings
• Sealed Unit – No Need To Re-Grease – No Gears –
Reduced Heat Development – Unlimited Duty Cycles
• Increases Time Intervals Between Service
• 1,000 to 1,200 Strokes Per Minute – Reduced Cycle Times
• Internal and External Machining Possible
(Clockwise and Left-Hand Rotation)
• Broach Inserts Available from PH Horn
• The Modular Design Guarantees Quick Delivery and
High Compatibility with BMT & VDI Connections
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA Radial Broach
Broach a .375” x .187” x 1.259” Keyway in 6 – 8 Seconds
LinA FS Radial for BMT & VDI Lathe Applications
Technical Data MM INCH
Working Stroke 32 1.259"
Total Stroke (lift deviation per side 1.5mm) 35 1.377"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 900 N/mm2 27.1 HRC
Maximum Lift Speed (RPM / strokes per minute)
1,000 1,000
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCHWorking Stroke 17 .669"
Total Stroke (Lift Deviation Per Side 1.5mm) 19 .748"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 1100 N/mm2 34.6 HRCMaximum Lift Speed (RPM / Strokes Per Minute)
1,200 1,200
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
• Higher Operating Speed
• Better Stability Due to Shorter Stroke
• Improved Surface Quality
LinA Radial BroachBroach a .375” x .187” x .669” Keyway in 5 – 7 Seconds
LinA Radial FSS Short Stroke
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCHWorking Stroke 13 .511"
Total Stroke (Lift Deviation Per Side 0.5mm) 14 .551"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 1100 N/mm2 34.6 HRC
Maximum Lift Speed (RPM / Strokes Per Minute) 1,200 1,200
Gear Ratio 1:1 1:1
Maximum Feed 0.20 0.0078"
• Higher Operating Speed
• Better Stability Due to Shorter Stroke
• Improved Surface Quality
LinA Axial BroachBroach a .375” x .187” x .511” Keyway in 4 - 6 Seconds
LinA Axial EMAG VL 3 Application
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCH
Working Stroke 32 1.259"
Total Stroke (Lift Deviation Per Side 1.5mm) 35 1.377"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 900 N/mm2 27.1 HRC
Maximum Lift Speed (RPM / Strokes Per Minute) 1,000 1,000
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
LinA Radial Broach
LinA FS Standard Stroke for Haas Axial Application
LinA FS Radial for BMT & VDI Lathe Applications
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCHWorking Stroke 17 .669"
Total Stroke (Lift Deviation Per Side 1.5mm) 19 .748"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 1100 N/mm2 34.6 HRC
Maximum Lift Speed (RPM / Strokes Per Minute) 1,200 1,200
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
• Higher Operating Speed
• Better Stability Due to Shorter Stroke
• Improved Surface Quality
LinA Radial BroachBroach a .375” x .187” x .669” Keyway in 5 – 7 Seconds
LinA FSS Short Stroke for Haas Axial Application
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCHWorking Stroke 51 2.007"
Total Stroke (Lift Deviation Per Side 1.5mm) 54 2.125 "
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 900 N/mm2 27.1 HRC
Maximum Lift Speed (RPM / Strokes Per Minute) 650 650
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
Minimum Turret Size – VDI40 or BMT55
LinA Radial Broach LinA FSL 51mm Long Stroke ApplicationFull 2.007” Stroke
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Technical Data MM INCHWorking Stroke 31 1.3779"
Total Stroke (Lift Deviation Per Side 1.5mm) 38 1.496"
Maximum Groove Width 8 - 10 .393"
Work on Materials up to a Hardness of 900 N/mm2 27.1 HRC
Maximum Lift Speed (RPM / Strokes Per Minute) 800 800
Gear Ratio 1:1 1:1
Maximum Feed 0.15 0.0059"
Overall Length Without Broach 351mm 13.818”
Estimated Weight 13.8 Kg 30 lbs.
LinA Radial Broach LinA DS 35mm Axial Broach for Machining Center Applications
Includes CAT or HSK & 3-Point Torque Arm
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA Radial BroachModel with Longer 51mm Stroke
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA XL Radial BroachLinA XL for Large Turning Applications
• Large Broaching for Large Diameter Parts
• Auxiliary Motor Driven
• 3.937” Working Stroke
• Groove Width up to .7874”
Technical Data MM
Working Stroke 100 mm
Total Stroke (Lift Deviation Per Side 2.5mm) 105 mm
Max. Groove Width ~20 mm
Work on Materials up to a Firmness of 900 N/mm2
Max. Lift/Speed 400 min-1
Gear Ratio 1:1
Max. Feed 0.15 mm
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA XL Radial BroachLinA XL for Large Turning Applications
Axial Version
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA XL Radial BroachLinA XL for Large Turning Applications
Radial Version
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinA XL Radial BroachLinA XL for Large Turning Applications
Version withSeparate Drive
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinS Axial Static BroachAxial VMC Application
• Broach Any Angle in VMC - 360° Rotation
• Eliminate Bearing Pressure Due to Rotating Spindle
• Reduction of Set-Up Time and Cost Savings from Complete
Manufacturing of Part in One Setup
• Economic Manufacturing of Keyways, ID and
OD Splines, Gears, Spur Gears as Well as Special Profiles
and Geometric Free Forms
• Tool Changer Compatible
• Three-Point Torque Arm Optional for Additional Rigidity
Technical Data INCHCut Per Stroke .001“ - .005”
Maximum Standard Groove Width .500"
Work on Materials up to a Hardness of 34.6 HRC
Spindle RPM 50
Gear Ratio 1:1
Maximum Feed - IPM 150 - 200
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
LinS AxialBroaches
LinA RadialBroaches
LinA Haas Axial Broach
LinA EMAGAxial Broach
Push Type Broaches
LinA Axial Broach for Machining
Centers
Powered by theSee Machining from a New Angle benztooling.com/broachingtools
Contact Us Directly For Questions
BENZ Inc. 704.529.5300
www.benztooling.com
8325 J Arrowridge Blvd.
Charlotte, NC 28273
Rapid Turnaround to Minimize Downtime• BENZ Inc.’s Standard Repair Service
Turnaround is Two Weeks
• Choose Expedite Service to Replace
Worn or Damaged Tools within 72 hours
• Preventive Maintenance Program is
Available to Minimize Unscheduled Downtime
• One-Year Warranty on all Repairs