Saving energy costs. simple. smart.

KNX innovations w

ww

.ling

g-ja

nke.

de

Electronic energy consultantThe visualization of all energy consumption data is of great importance for the acceptance of potential energy saving mea-sures and changes in consumer behavior. With KNX FacilityWeb by Lingg & Janke, all electricity, gas, heat and water consumption data can be read out and visualized at any time. The Energy Analyzer from Lingg & Janke displays the data in the form of daily, weekly, monthly and annual evalua-tions. The consumer, house owner or real estate manager now has the possibility to analyze energy consumption continuous-ly, introduce adequate energy saving measures or shift energy usage to off-peak periods. You can also use FacilityWeb to easily visualize and monitor the self-consumption or in-feed of rene-wable energy.

Network couplers ‚graphic‘The Lingg & Janke network couplers NK-FW-graphic and NT80 NK-FW-graphic connect the KNX/EIB bus with the IP network. They provide both HTTP and FTP server functio-nality. The couplers‘ integrated 104 datapoint visualization can be directly accessed using a web browser - no additio-nal configuration is required.

Easy KNX communication The NK-FW network couplers establish the interface to the FacilityWeb. Via this interface, the data from the bus coup-lers of the KNX devices can be visualized directly with a web browser or made available for download using FacilityWeb technology. Transmission is based on the certified FTP over KNX protocol.

Transparency for the energy types electricity, gas, heat and water • Upto8meterspernetworkcoupler• Storageofhourlyvaluesovera10-yearperiod

Graphical representation of daily, hourly, monthly and annual values • MWh,kWh,m³andliters• Currentday,week,monthoryear (andreferenceperiods)Presentation of costs (Euro) • Multiplierperunit

Visualization of 72 additional values • 1-bit,1-byte,2-byteand4-bytevalues

All energy costs at a glance simple. smart.

Network couplers NK-FW-graphic / NT80NK-FW-graphic

Saving energy costs. simple. smart.www.lingg-janke.de

eHZ metersThe electronic domestic supply meters (eHZ) provide the basis for the implementation of Smart Metering. Using Lingg & Janke KNX FacilityWeb, all energy consumption data can be conveni-ently read out and analyzed.

KNX interface The eHZ KNX interface BCU-EZEHZ-D-REG-FW consists of an optical reading head with RS232 connector and the KNX inter-face in a DIN rail box. The various protocols of the domestic supply meter (eHZ) manufacturers are read via the optical customer interface. Depending on the protocol provided by the manufacturer, information such as T1/T2 readings, import/export readings, and power, voltage and current values can be read out.

The Lingg & Janke KNX/EIB module stores the measured data at 15-minute intervals over a period of one year and provides full FacilityWeb capability. Every meter has its own web page. The meter readings can be read out directly via a network coupler using a standard web browser, or transmitted for further processing and billing purposes using FTP.

KNX Smart Electricity MetersThe new Lingg & Janke KNX DIN rail meters are multifunctional three phase energy meters of only 90 mm (5 Units) width offe-ring exceptional flexibility and accuracy. Providing direct or current transformer connection, these meters are capable of analyzing and monitoring a variety of parameters and can be employed in even the most demanding residential, commercial or industrial field of application. They combine the functions of a multimeter, energy meter and data logger in a single device. Using KNX FacilityWeb, the meters can read out and log nu-merous measured values, such as active and reactive energy, active and reactive power, voltage, current and power factor. Each one of the different output values can be monitored with two thresholds. The Standard KNX meter can be used for direct measurement (85 A) and transformer measurement (1 and 5 A). The rating factor for the transformer meter can be defined in a wide range on the device. The Standard KNX meter is an accumula-ting unidirectional meter for active energy reading supporting up to 4 tariffs. The Superior KNX meter is an accumulating bidirectional meter that is also capable of reading reactive energy. It can be used for direct (85 A) or transformer measure-ment (1 and 5 A) and also supports up to 4 tariffs. In addition, it provides 4 switching outputs (230VAC, 90mA max.) that can be operated over the KNX bus.

eHZ KNX interface

Standard / Superior KNX DIN RAIL Meters

BCU-EZEHZ-D-REG-FW

EZ-EMU-DSTD-D-FW / EZ-EMU-DSUP-D-FW

www.lingg-janke.deKNX - FacilityWeb innovations 01/2013

Based on the open standard „FTP over KNX“, effi cient smart meter solutions for consumption measurement and analysis can be easily implemented to monitor energy usage and control energy costs.

Lingg & Janke supplies innovative products and system solu-tions for more effi ciency, security and installation fl exibility in both residential and commercial buildings.Lingg & Janke KNX Smart Metering comprises branch and ma-nufacturer independent universal solutions for the integration of a wide variety of meter types.

• Complete FacilityWeb functionality • Low energy consumption • Data logger with storage capacity for one year‘s consumption data • HTTP protocol

Universal dimming actuator 4 x 2.5 AThe new Lingg & Janke KNX 4-gang universal dimmer can be used for all common dimmable light sources, including energy saving and LED retrofi t lamps. It off ers the operating modes universal, leading-edge and trailing-edge control. Each channel can be connected to a maximum load of 570 W/VA. For greater lamp loads, two dimming channels can be operated in parallel so that a dimming output of 2x 1140 W/VA can be achieved.

All four channels are 100 percent short-circuit proof. In additi-on, each channel has its own integrated energy consumption meter that can read out active energy, active power, voltage (Vrmf) and current (Irmf) values. The data format is the same as for the Lingg & Janke energy meters. The dimmer provides full FacilityWeb capability and has its own homepage.

FacilityWeb is a registered trademark of Lingg & Janke. It provides highly eff ective functions for measuring, visualizing and controlling the consumption of diff erent energy sources via Intranet or Internet. Commissioning engineers, house owners or real estate managers are now able to obtain operational information or meter readings of the devices from any location via Intranet/Internet and implement energy saving measures while the individual systems are operating.

KNX Smart Metering Lingg & Janke KNX Smart Metering is distinguished by the low energy consumption of the emplo-yed KNX bus couplers. With a power con-sumption of 0.2 Watt only, FacilityWeb off ers a high degree of energy effi ciency for smart metering applications. Facility-Web products put minimal strain on the environment.

Universal dimming actuator DIM4FU-2-FW

Subject to technical modifi cation / errors excepted

NordwestdeutscheZählerrevision

KNX Smart Metering by Lingg & Janke – branch and manufacturer independent

Lingg & JankeKNX/EIB SystemhausZeppelinstraße 30D-78315 Radolfzell

tel +49 (0) 7732 945 57 50fax +49 (0) 7732 945 57 99e-mail info@lingg-janke.deweb www.lingg-janke.de