LindabMarine - dantech-group.com€¦ · Lindab Safe system or other equivalent systems on the...
Transcript of LindabMarine - dantech-group.com€¦ · Lindab Safe system or other equivalent systems on the...
l indab | we simplify construction
LindabMarine Lindab Safe® Click duct system – the more we simplify, the more you save
TÜVtested five
duct systems and documented the
advantages of the different solutions
We simplify. You save.
2 LindabSafe Click
Lindab Safe Click can be used anywhere where there are
stringent demands for tightness. Lindab Safe Click can
be used anywhere where there are stringent demands
for tightness. Especially within Marine installations where
mounting space often is limited, you will obtain a lot of
benefits using this system.
Optimization of the tightness in the joints, and thus the
entire duct system is of great significance in the context of
the ever-increasing focus on energy efficient and energy
saving installations.
The system is quickly and easily installed, especially where
space is limited, and you will get the correct installation
every time. Installation times can be reduced by about
10 % using Lindab Safe Click compared with the traditional
Lindab Safe system or other equivalent systems on the
market.
The system is easier to clean inside, because there are only
very few points from screws or pop rivets.
Lindab Safe Click is based on our well-known and fully
tested product programme Lindab Safe, which has been
on the market for more than 35 years. Lindab Safe Click is
available in the dimensions Ø 80 mm – Ø 315 mm. Available
dimensions may however differ from market to market.
Lindab Safe Click can be provided for products
manufactured of galvanized sheet metal.
Future duct systems installed with a minimum number of screws or pop rivets.
3LindabSafe Click
Lindab Safe® ClickAssemble easy and fast
One click – and the job is done perfectly
The innovative duct system from Lindab is based on a principle well known to you. A simple click is all it takes to assemble the ducts and fittings. Save time and create a perfect ventilation solution.
Lindab Safe Click is installed quickly and easily with just
a click. The system improves working conditions and
saves important time for installers and contractors. You will
especially benefit from Lindab Safe Click where space is
limited and the handling of tools is difficult.
Minimise the use of tools,
rivets or screws.
Assemble ducts
with a simple click.
"CLICK"1 2
4 LindabSafe Click
Lindab Safe Click lets you take duct installation into your
own hands. The system is based on our well-known, tested
and documented Lindab Safe system. It is compatible with
both Lindab’s existing systems and other systems on the
market. The system offers numerous advantages.
• Quick assembly
• Minimised use of screws or rivets
• Easy to install, especially where space is limited
• Better ergonomics
• Assembling and adjusting is made easier
• Fewer holes from screws or rivets in the duct system
and thereby a tighter system
• Fewer sharp parts from screws or rivets in the duct
• The ducts are easier to clean and the risk of bacteria
growth is reduced
• Based on our well-known, tested and well-documented
Lindab Safe® system
• Compatible with other systems
You get the same proven system. We just added simplicity.
Advantagesduring installation
Advantagesduring use
Lindab Safe Click consists of a range of circular
ducts and fittings. The system is currently available
in dimensions from Ø 80 mm – Ø 315 mm.
Bring installation to the highest level
Ordinary duct system with screws Lindab Safe® Click
5LindabSafe Click
AboutTÜVTÜV (Technischer Überwachungs
verein) Rheinland is a leading
supplier of technical services to
businesses the world over. TÜV
use their ingenuity, expertise
and strong global network to
contribute towards the continued
development of products, services
and systems. They are impartial
consultants and advise, examine
and document products for
businesses on a daily basis.
TÜV’s promise is ’Precisely Right’.
Regardless of what TÜV do, they
do it precisely and correctly. This
is why we have chosen them to
document the advantages of five
different duct systems regarding,
amongst other things, installation
and tightness.
6 LindabSafe Click
We know the advantages of Lindab Safe® Click. That is why we asked TÜV to test and document our duct system solutions.
Lindab Safe Click – a simplified and improved duct
system solution
At Lindab we work continuously to simplify and prepare our
solutions. One of the results is Lindab Safe Click. The duct
system based on our renowned, tested and documented
system, Lindab Safe. Lindab Safe Click provides a significant
number of advantages, concerning both installation (including
time and ergonomics) and tightness, and thereby operation
and economy.
TÜV document the advantages of the various systems
TÜV have tested and documented the advantages of the
various systems. They have monitored the installations
and tested five duct systems from Lindab, and compared
the results taking into consideration costs, tightness and
installation. Their test results enable you to gain a quick
overview of the documented advantages of choosing Lindab
Safe Click.
Safe® ClickLindab’s innovative duct system
that clicks together, only
requiring a minimum of screws.
Safe®
Circular spirally folded ducts and
fittings with factory-fitted double-
lipped sealing strips. The joints
are secured by screws.
Vent with tapeCircular spirally folded ducts and
fittings. The joints are secured
by screws and are sealed using
PVC tape post-installation.
Vent with masticCircular spirally folded ducts and
fittings. The joints are secured
by screws and are sealed using
mastic. post-installation.
RectangularRectangular ducts and fittings
with flanged joints. The joints are
fitted with a tightening band.
2413,56
2906,62
2487,49
2496,37
1912,22
2851
All the duct systems were installed in the ceiling in
accordance as per this diagram. The system can be
regarded as a typical sub-system in a ventilation system
for offices or hotels.
~12 m~12 m
7LindabSafe Click
RectangularSafe® Click Safe® Vent with tape
Vent with mastic
0
wages €
Price €
component price €
1400
1600
1800
2000
2200
2400
2600
1200
When you choose Lindab Safe
Click, you’ll be lowering your costs.
Component prices are just about the
same, but you’ll save time on the
installation. Which means lower total
costs.
Component prices and wages
Advantages when installing
RectangularSafe® Click Safe® Vent with tape
Vent with mastic
85
100
115
130
145
160
175
190
205
220
235
0time (h:m)
Index
03:55 04:25 06:05 06:25 08:55
Lindab Safe Click has a significant
number of advantages concerning
installation. It gets easier to create a
leak proof solution as the duct system is
easy and quick to assemble and install –
all it needs is a simple click. The working
conditions are improved for the fitter
who himself saves time thanks to the
easy installation.
• Easy to join
• Easy to install, especially where space
is limited
• Better ergonomics
• Easier to assemble and adjust
• Compatible with both Lindab’s other
systems and other systems available
on the market
Installation time
Total costs
8 LindabSafe Click
System Installation time (hours)*
Installation time index
Component price € **
Component price index
Total price € ***
Total price index
Pressure (Pa)
Messured leakage (l/s)
Achieved tightness class
Lindab Safe® Click(index 100) 3:55 100 1467,26 100 1858,93 100 400 0,71 D
-750 0,85 D
Safe® 4:25 113 1467,26 100 1908,93 103 400 0,8 D
-750 0,94 D
Vent with tape 6:05 155 1390,82 95 1999,15 108 400 7,63 B
-750 11,46 B
Vent system with mastic 6:25 164 1409,12 96 2050,79 110 400 7,18 B
-750 8,42 B
Rectangular 8:55 228 1684,83 115 2576,50 139 400 7,25 B
-750 9 C
TÜV acts as guarantor for the impartial testing and documentation of Lindab Safe® Click. Refer to the diagram, and let the results speak for themselves.
* Total installation time using 2 fitters. ** Based on German prices in August 2008. The prices include suspension, tape, mastic and screws. *** Includes hourly rates for fitters in Germany in August 2008.
System Installation time (hours)*
Installation time index
Component price € **
Component price index
Total price € ***
Total price index
Pressure (Pa)
Messured leakage (l/s)
Achieved tightness class
Lindab Safe® Click(index 100) 3:55 100 1467,26 100 1858,93 100 400 0,71 D
-750 0,85 D
Safe® 4:25 113 1467,26 100 1908,93 103 400 0,8 D
-750 0,94 D
Vent with tape 6:05 155 1390,82 95 1999,15 108 400 7,63 B
-750 11,46 B
Vent systemwith mastic 6:25 164 1409,12 96 2050,79 110 400 7,18 B
-750 8,42 B
Rectangular 8:55 228 1684,83 115 2576,50 139 400 7,25 B
-750 9 C
TÜV acts as guarantor for the impartial testing and documentation of Lindab Safe® Click. Refer to the diagram, and let the results speak for themselves.
Lower total costs
Better tightness
The purchase price alone of the Lindab
Safe Click components is approximately
5 % higher than the price of the circular
duct system Vent sealed with tape,
the solution is approximately 8 %
cheaper when taking the total price into
consideration.
The speed of installation ensures that
you can keep the total costs at a lower
level than would have been the case for
the other duct systems.
RectangularSafe® Click Safe® Vent with tape
Vent with mastic
Total price index
0
95
105
115
125
140
100
110
120
130
135
Total costs (index)
RectangularSafe® Click Safe® Vent with tape
Vent with mastic
Target leakage l/s
At pressure -750 (Pa)
At pressure 400 (Pa)
B
B
B
BC
B
D DD D
0
1
2
3
4
5
6
7
8
9
10
11
12
The systems’ tightness was tested using
Lindab’s Leakage Tester. A tight solution
means a reduced energy consumption.
The results show that Lindab Safe and
Lindab Safe Click obtained the best
results and were classified in Tightness
Class D for measurements taken at both
400 Pa and -750 Pa. This is far better
than the other duct systems, classified
as Tightness Class B (C).
Operational advantages
• A minimum number of holes from
screws or rivets in the duct system
and consequently a tighter system
– with resulting lower operational costs
• Few sharp points from screws
or rivets in the ducts.
• The ducts are easier to clean and the
risk of bacterial growth is consequently
lower. Providing better hygiene.
Tightness
11LindabSafe Click
Thorough and well-documented tests
TÜV acts as guarantor for the tests, which are impartial,
thorough and well-documented – down to the last detail.
For the purpose of the tests the five duct systems were
assembled in the ceiling using the same basic sketch,
and for the installation all the steps were carried out once
more, enabling all the systems to be compared in exactly
the same manner.
All the leakage test measurements of the duct systems
were carried out in accordance with EN 12237 (circular)
and EN 1507 (rectangular).
Conclusion: You get a better solution
You achieve a better solution when you choose Lindab
Safe Click. TÜV emphasize that the duct system supplied
with prefabricated leak proofing systems from the supplier
has the advantage over systems that require leak proofing
on site, which is more difficult to achieve.
Lindab Safe Click allows you to minimise the risk of
incorrect installation which is paramount to the quality
of the solution. In this way you will be able to achieve
better tightness of the duct system and a reduced
energy consumption. This is of consequence for both the
environment and the economy in the long term.
TÜV’s conclusion is that Lindab Safe Click distinguishes
itself by a faster installation, better tightness and lower
total costs compared to other systems on the market.
Lindab Safe Click, on that basis, is the most advantageous
duct system.
How can you use TÜV’s figures? It rather depends on whether you are designing, purchasing or installing. Let’s make a few comments about the individual results.
The main conclusions arrived at by TÜV were that when choosing
Lindab Safe Click you will achieve a shorter installation time, lower
costs and better tightness in the chosen ventilation solution.
This entails lower operational costs.
12 LindabSafe Click
13LindabSafe Click
Pliers for the cutter
Well begun is half done
A large range of dimensions
We have pliers for adding notches on to the Lindab Safe
Click ducts. We provide you with two different pliers
suitable for sizes Ø 80 mm – Ø 224 mm and Ø 250 mm
– Ø 315 mm, which both are smaller and lighter than the
former plier.
We have made a complete guide of instructions showing
you how easy the assembly of Lindab Safe Click is and
how to solve different assembly situations. We have also
made a pocket guide to make Offset calculations easier.
Instead of using your time to measure and test duct lengths
you can use the guide!
The Lindab Safe Click range of circular ducts and fittings
is now available in many dimensions. The programme is
extended to include dimensions from Ø 80 mm – Ø 315 mm
and you can also order additional sizes.
Additional help tools for the installer
14 LindabSafe Click
SR Roller for the large dimensions
The SR Cutterimproves ergonomicson the building site
For dimensions larger than Ø 315 mm we have an
ergonomic solution that makes the cutting of large ducts
safe and easy: SR Roller. Place the duct on the SR
Rollers to move it easily while cutting with the nibbler
from the SR Cutter.
The SR Cutter offers you better working conditions
and makes it physically less demanding to cut ducts.
You get a precise and clean cut of ducts – every time.
We have improved the SR Cutter in several ways. First of
all you get improved pliers and knife arm. Furthermore, a
new handle makes the SR Cutter even easier to bring to
the building site and to move around. The SR Cutter is
both CE and TÜV certified.
15LindabSafe Click
At Lindab, good thinking is a philosophy that
guides us in everything we do. We have made it
our mission to create a healthy indoor climate –
and to simplify the construction of sustainable
buildings. We do that by designing innovative prod-
ucts and solutions that are easy to use, as well as
offering efficient availability and logistics. We are
also working on ways to reduce our impact on
our environment and climate. We do that by de-
veloping methods to produce our solutions using
a minimum of energy and natural resources, and
by reducing negative effects on the environment.
We use steel in our products. It’s one of few materi-
als that can be recycled an infinite number of times
without losing any of its properties. That means
less carbon emissions in nature and less energy
wasted.
We simplify construction
2660 NW 15th Court, Suite 104 Pompano Beach, FL 33069, USA Office ph# +1 954 414 9567 [email protected]