LIMITED NEW ZEALAND - Aeronavics Ltd
Transcript of LIMITED NEW ZEALAND - Aeronavics Ltd
LIMITED NEW ZEALAND
SPECS SKYJIB SUPER 6
Payload Capacity: 2.5 kg Diameter: 1092 mm
Flight Endurance: 20 minutes Pack-down Dimensions: 1092 x 251 mm
MTOW: 7 kg Payload/Ground Clearance: 450mm
The Aeronavics SkyJib is an iconic aerial robotic workhorse designed for payloads between 2.5 to 7.5 kg, depending on the
configuration. Designed with field operations in mind it is easy to pack down and deploy with quick release components. The craft is
made from high quality carbon composites and aircraft grade alloys including Titanium. The several camera mounting options
accommodate a variety of cameras and offer smooth and fully stabilised footage.
+
+
Package 1 - This package includes a fully assembled and tested craft to add to your fleet and bind to your existing radio. READY TO 23,475.00 NZDOPERATE
READY TO FLY 16,585.00 NZD
BIND ‘N FLY 13,995.00 NZD Package 3 - Only add a Camera and you are setup to capture fully stabilized imagery (video and stills) and see
real-time what the camera is recording with Mission Control Lite.
2.4 Ghz Radio controller System Handover
Zenmuse gimbal (camera not included) Mission Control Lite
+LiPo batteries and charging station
Package 2 - A fully assembled and tested craft including 9 channel radio fully setup and configured,
two batteries, battery charging station and 2 hour instruction.
Wireless video downlink
NZD 700.00
Canon 5D
A surcharge fee applies
Zenmuse
For Sony Nex5 / Nex7
Panasonic
GH3 / GH4
CAMERA MOUNT OPTIONS
Choose your camera mount. The camera mount is included in package 3 - Ready to Operate.
UNIVERSAL CAMERA MOUNTS ARE AVAILABLE ON REQUEST.
Waypoint Data Link
Autonomous flight programming
Dual Operator Setup
Dedicated operator for camera control
Custom Pelican Transport Case
Keep your craft safe and secure
Flight Training
Intermediate 1 day
Pix4D Mapping System
See Pix4D section for package price
OPTIONAL EXTRAS
Light-bridge
High Definition wireless video downlink
NZD 395.00
NZD 1895.00
NZD 495.00 NZD 1750.00
Mission Control Flight Ops
Joystick control and iPad operation
Set of Carbon Propellers
18 x 6 CW+CCW
Mission Control Ground Station
Setup for pilot and camera operator
Field Repair Kit
SkyJib first aid kit - worth over NZD 750,00
Extra Battery
6S LiPo 10000mAh
1st Service Discounted
Full check, test and tune. (Normally NZD 899.00)
OPTIONAL EXTRAS
NZD 4,950.00 NZD 7,940.00 NZD 155.00
NZD 600.00 NZD 415.00NZD 799.00 NZD 1699.00
Replace Bearings
Batteries Check
Upgrade Firmware
Frame Check
Electronics
Test Flights
FLIGHT SCHOOL & CERTIFICATION
Aeronavics offers a range of flight training aligned with and recognised by CAA
RPAS, including the “Manufacturer Training” required for certification in various
countries. The packages are designed to supply the operator with the knowledge
and skills to operate aerial robotic craft safely and within Aviation Authority
regulations.
The following training programs are offered / implemented:
Intermediate (1 day):
• Introduction to flight safety
• Technical overview of electronics
• Overview of controller and modes
• Practical assisted flights and controls with basic manoeuvres
Comprehensive (3-5 days):
• Extensive overview of safety, flight logging and craft maintenance
• Basic Air Law - TBD
• Full technical overview of crafts and all their components
• Configuration and assembly of electronic components
• Full technical overview of flight controller
• Configuration of flight controller
• Flight controller modes and features
• Standard operation procedures for performing flights
• Flight simulator - 2 hours
• Basic assisted flights - 2 hours
• Basic flight modes - 2 hours
• Basic flight manoeuvres - 4 hours
• Comprehensive fails safe and recoveries - 4 hours
• Autonomous waypoint flying - 8 hours
• Intermediate flight manoeuvres - 4 hours
• Manual (unstabilised) flight training - 4 hours
• Full technical evaluation - 4 hours
• Full piloting evaluation - 4 hours
Please contact us for specialised training and assistance requirements.
Consultancy services are available for Agricultural applications in collabora-
tion with AbacusBio - details available on request.
Regulation/Certification requirements differ per country – we can supply you with
the relevant information.
MISSION CONTROL
Aeronavics has developed a range of Ground or Base Station units (Mission
Control) to allow the operator of the Aerial Robot to easily view on board video
streams. Live telemetry data shows the state and health of the craft and also
allows for a means to operate the craft without hand held control interfaces such
as RC transmitters.
The “Lite” unit is an RC Transmitter mounted display screen and wireless video
downlink - this is the simplest way to interact with the craft in order to pilot and
view simultaneously what the craft is seeing, and operate the camera remotely.
The “Ground Station” unit is housed in a quality and robust SKB case and offers
a variety of interface options - this self-powered unit can run additional monitors,
provide USB charging, video control interfaces as well as its own Hi Resolution
monitor and Remote control unit.
Dimensions: 500 x 400 x 280 mm
The “Flight Ops” version has all the features of the “Ground Station” unit as well
as a joystick control 2.4 Ghz 6 channel transmitter for a second operator to con-
trol the craft or its on-board devices such as Thermal imaging cameras and laser
sighting equipment.
It also has an i-Pad mounting facility for tablet control interfaces such as way-
point and grid pattern autonomous flight modes and an array of automated flight
and camera functions.
This unit enables two people to efficiently conduct full search and rescue, sur-
veillance and situational awareness operations in the field, as
well as advanced camera control for film and television.
Dimensions: 500 x 400 x 280 mm
Pix4Dmapper is used by a wide range of industries such as Mining, Agriculture,
Topography, Natural Resources Management, Emergency Response and many
more to help professionals of multiple domains with mapping as an easy day-to-
day task.
Pix4Dmapper converts aerial and oblique images taken by the SkyJib into
geo-referenced 2D orthomosaics and 3D surface models and point clouds.
With its advanced automatic aerial triangulation based purely on image con-
tent and unique optimisation techniques. Pix4Dmapper software offers up to
centimeter-grade 3D precision, features a fully automatic workflow and can
be used by anyone as it is intuitive and easy to use.
You can assess, edit and improve projects directly in the software using the
rayCloud and Mosaic Editor and seamlessly import results into any professional
GIS, CAD and traditional photogrammetry software package.
• Survey-grade accuracy: Achieve up to cm grade, LiDAR like 3D precision.
• Intuitive & easy to use: no training needed, easily process projects thanks to
the fully automated workflow and visualise & edit results.
PIX4D SOFTWARE
Aeronavics offers a Pix4D package deal with your Ready to Operate SkyJib 6:
30,920.00 NZD. This solution can be used in Mining, Topography, Agriculture,
Natural Resource Management, Construction and Emergency Response
industries. It will give you the opportunity to:
• Annotate and measure polylines (breaklines), surfaces and volumes
(stockpiles) with the highest precision achievable
• Generate your orthomosaics, DSMs and point clouds from aerial and oblique
imagery using any camera and lens, including multi-band images. Keep full
control over your projects at all times by assessing and editing all tie points
(GCPs, Check points, etc.).
• Use the fully automatic workflow and let the software handle all calibration
and processing to achieve survey grade accurate outputs. Increase efficiency
and save on extra field trips with Rapid Check mode for instant quality
assessment directly on site.
• Assess and edit your projects using the rayCloud and Mosaic Editor.
Improve the accuracy of your projects and annotate objects directly in the
software, then seamlessly import your results and vector objects into your
industry specific workflow and any GIS, CAD and traditional photogrammetry
software package.
Discover how our SkyJib Ready to Operate and Pix4Dmapper package can
cover the needs of your industry by clicking on the video below or by visiting
our .
AERIAL ROBOTICS – THE NEXT “BIG THING”
Aerial Robotics or Unmanned Aerial Vehicles, are already proving to be ‘the
next big thing’ comparable to the personal computer 40 years ago. There are
countless applications in a wide array of industries to help save time and money,
increase safety, offer peace of mind and expand creative perspectives. Systems
are easy to use, affordable, quiet and environmentally friendly; more great
reasons to adopt this technology.
• Modular setup - easy pack down for transport
• Pelican Custom Travel Cases (optional)
• Real-time streaming of onboard video to mission control ground stations
• GPS coordination and waypoint programming (various degrees)
• Various fail safes including ‘auto-leveling’, ‘position hold’, ‘return to base’,
‘auto-land on low battery’ and controller-redundancy (non-standard)
• Battery powered (LiPo)
• Operational wind speed for autonomous flight up to 40km/h
• Range of 3km (extendable up to 25km)
• Speed up to 80km/h
• Height ceiling of 400ft AGL (regulation enforced)
• Four hours support included
GENERAL SPECS ACROSS ALL MODELS
Application
From Hollywood blockbusters to wedding photography - aerial robotics is
changing the way video and images are captured. Surreal sweeping shots,
a true birds-eye view… Wildlife documentaries, commercials, news reports,
advertisements and live broadcasts of sporting events are all enhanced by
the new perspectives our systems offer.
World renowned for advanced vibration dampening, payload capacity,
transportability and durability, our systems have been the preferred choice for
industry professionals for several years.
For who: Benefits:
• Production Companies
• (Semi) Pro Camera Operators
• Camera Rental Companies
• Marketing Agencies
• Real Estate Agencies
• (Aerial) Photography Companies
• Expand Creative Potential &
Perspective
• Increase Efficiency / Flexibility
• Save Money / Time
• Increase Safety
• Reduce Environmental Impact
Application
Easy to deploy, operate and retrieve, these systems are an essential resource to
increase situational awareness, assess damage from natural disasters, search
for missing bushwalkers, find hot spots in forest fires, sample air for pollution,
map environments, inspect infrastructure, secure borders, report accidents and
monitor environmental change.
Infrared and Thermal Imaging cameras and various other equipment such as
3D LIDAR expand the functional value of these craft; the potential is limitless
and we are ever expanding the scope of possibility.
For who: Benefits:
• Police / Law Enforcement
• (Rural) Fire Brigades
• SAR Organizations
• Councils
• Coast Guard
• Federal Agencies
• Universities/Research
• Increase Situational Awareness
• Increase Safety
• Increase Efficiency
• Save Money / Time
• Reduce Environmental Impact
MEDIA PUBLIC SERVICES INDUSTRY
Application
Cost effective, saving time and reducing risk to human lives – industrial
applications are expanding for this technology and we are developing
specialized craft for these; an ideal tool for mapping, planning and progress
monitoring. Property developers can provide views from the 3rd, 4th, 10th floor
of a building that does not even exist yet. Damage to property and the
environment can be swiftly and accurately assessed after natural disasters;
architects can create instant 3D images and imprints of subject areas and
structures. Mining companies can gather volumetric data in just minutes;
surveyors and construction companies can 3D map area’s with relative ease;
a power company can inspect lines and transformers…and carry leader lines
across gulley’s and ravines…and this list grows daily.
For who: Benefits:
• Mining Companies
• Civil Engineering Companies
• Oil and Gas Companies
• Energy / Utilities Companies
• Property Developers / Architects
• Insurance Companies
• Increase Safety
• Increase Efficiency
• Increase Precision
• Save Money / Time
• Reduce Environmental Impact
Application
Scan your property with a birds-eye view to inspect infrastructure and stock
- gathering crucial information for planning the day’s activities. Remove the
safety hazard of monitoring and mustering in rough terrain, save fuel, machinery
costs and time simultaneously. Count stock instantly, accurately and remotely,
recognise animals in distress. A number of agri-specific sensors are being
developed for Precision Agriculture to monitor crop health, growth, irrigation,
forecast yields, detect diseases at early stage and systems are even used to
scare birds. Precision Spraying is under development for quick and precise
crop and weed spraying, with greater safety for operator and environment.
Forestry and fisheries are also opening to new possibilities that enable greater
productivity.
For who: Benefits:
• Dairy Farmers
• Beef and Sheep Farmers
• Crop Farmers
• Vineyards
• Forestry
• Fisheries
• Agricultural Contractors
• Save Money / Time
• Increase Efficiency
• Increase Precision
• Increase Safety
• Reduce Environmental Impact
• Attract Younger Generation
AGRICULTURE