LIL TIPPER II - PermcoLil Tipper Code TV2 - ORB - A - 1 - ** Tipping Valve NPT - Ports ORB - Ports A...
Transcript of LIL TIPPER II - PermcoLil Tipper Code TV2 - ORB - A - 1 - ** Tipping Valve NPT - Ports ORB - Ports A...
Heavy & Medium Duty Dump Trucks & Trailers
LIL TIPPER II
• Pump and cylinder protected in the “Raise” and “Neutral” position of the spool
• Manual shift, factory installed “OE” air, or “Add-on” air shifts each with full metering capabilities
• Gemini/ Dual Pressure relief valve available
• Pressures up to 3200 psi and flows up to 46 GPM
• Built-in load check maintains dump body angle and is installed in the cylinder port for superior self-cleaning
• Built-in direct acting relief valve set at factory
• Neutral lock-out safety cap for use with pull-out cable
• Valve is remotely mounted when space around PTO is limited
• Dedicated return line protects the pump from excessive heat
• 100% factory tested
• SAE and NPT ports available
Precision-Engineered Fluid Power Products
The Sensible Choice for Pumps
FeaturesDump TrucksWalking Floor
Dual Pressure relief
Standard relief
Permco USA | 1500 Frost Road | P. O. Box 2068 | Streetsboro, Ohio 44241
Copyright © 2015 © Bulletin # LTV2-0120 Version 1.0
Pumps
Dimensional Data (inches)
Permco is a leading manufacturer of high-pressure hydraulic gear/vane pumps and motors, flow dividers, intensifiers, and acces-sories. Available in a wide variety of sizes and configurations to suit your application needs.
www.permco.com
Our Online Support is available 24/7/365 for your needs!
Email: [email protected]
Call: (800) 626.2801
Lil Tipper Code
TV2 - ORB - A - 1 - **Tipping Valve
NPT - PortsORB - Ports
A Air ShiftM Manual Shift
Pressure Setting20 2000 psi25 2500 psi30 3000 psiBlank Gemini
1 RP-5514X RP-5514-300025/32 Gemini/Dual Pressure*
*Customer must provide both lower and higher pressure relief settings.
P Outlet (to cylinder)
P1 Inlet (from pump)
TTank Line
(Return to Tank)
T-TANKCUSTOMER SUPPLIED
1.22
A
B P-CYLINDER
A
C
P1-INLET
LOWER PORT
RAISE PORT
1.22
2.01
2.28
1.18
C
B
P-CYLINDER
T-TANK
P1-INLET
AIR SHIFT
TIPPING VALVE V2, DWG
THIS PRINT AND THE DESIGN AND DETAIL SHOWN
HEREON ARE THE PROPERTY AND INVENTION OF
PERMCO, INC. THIS PRINT IS FURNISHED WITH
THE UNDERSTANDING THAT IT IS NOT TO BE
TRANSFERRED, TRACED, REPRODUCED, STORED IN
A RETRIEVAL SYSTEM OR TRANSMITTED, IN ANY
FORM OR BY ANY MEANS, ELECTRONIC, MECHANICAL,
PHOTOCOPYING, RECORDING OR OTHERWISE WITHOUT
PRIOR WRITTEN PERMISSION OF PERMCO, INC.
AND IS RETURNABLE UPON DEMAND. ALL RIGHTS OF
DESIGN AND INVENTION ARE RESERVED BY
PERMCO, INC.
DO NOT SCALE DRAWING
DRAWING NO.THIRD ANGLE PROJECTION
REVISIONDATEDRAWN BY -09-07-18KBS