Proposed Guidelines for the Use of passive RFID Transponders ...
LightPad i6400G - Padtec – DWDM Optical Networks · 2018. 6. 23. · 100 Gbps Transponders Family...
4
Product Data Sheet LightPad i6400G Ultra-broadband 100 Gbps Transport Solution Telecommunication operators today are faced with the challenge of ensuring that their transport networks can handle the increasing demands for high capacity bandwidth. Network transmissions systems must have the flexibility to adapt and expand seamlessly. Operators require cost-effective ways to address this growth, while minimizing the impact on the cost per transported bit, as well as protect their investments made in legacy services. The most optimal and scalable solution is to increase the transmission rate of each channel individually. The emergence of 100 Gbps solutions optimizes the use and efficiency of optical channels meeting all requirements imposed by IP traffic flood. The deployment of 100 Gbps channels make it possible to combine transport at multiple Tbps over a single fiber pair, assuring optical networks to support a wide range of ultra-broadband services at a low cost per bit. In addition to optimizing system cost, the enhanced performance and capacity provided by 100 Gbps solutions help operators overcome difficulties imposed by constant transformations in transport profile, while also supporting legacy services. In an extremely competitive market, the seamless evolution provided by upgrading network from lower rates to 100 Gbps per channel is the best way to maintain business sustainability leveraging current network infrastructure. The development of new access infrastructure as FTTx, 4G, LTE and constant changes in traffic profile are pushing operators to upgrade their transport networks. Solutions based on 100 Gbps offer high capacity and cost optimization, leveraging current DWDM infrastructure.
Transcript of LightPad i6400G - Padtec – DWDM Optical Networks · 2018. 6. 23. · 100 Gbps Transponders Family...
Prod
uct D
ata
Shee
t
LightPad i6400GUltra-broadband 100 Gbps Transport Solution
Telecommunication operators today are faced with the challenge of
ensuring that their transport networks can handle the increasing demands
for high capacity bandwidth. Network transmissions systems must have the
flexibility to adapt and expand seamlessly. Operators require cost-effective
ways to address this growth, while minimizing the impact on the cost per
transported bit, as well as protect their investments made in legacy services.
The most optimal and scalable solution is to increase the transmission rate of
each channel individually. The emergence of 100 Gbps solutions optimizes
the use and efficiency of optical channels meeting all requirements imposed
by IP traffic flood. The deployment of 100 Gbps channels make it possible
to combine transport at multiple Tbps over a single fiber pair, assuring
optical networks to support a wide range of ultra-broadband services at a
low cost per bit.
In addition to optimizing system cost, the enhanced performance and
capacity provided by 100 Gbps solutions help operators overcome
difficulties imposed by constant transformations in transport profile, while
also supporting legacy services.
In an extremely competitive market, the seamless evolution provided
by upgrading network from lower rates to 100 Gbps per channel is the
best way to maintain business sustainability leveraging current network
infrastructure.
The development of new access infrastructure as FTTx, 4G, LTE and constant changes in traffic profile are pushing operators to upgrade their transport networks.
Solutions based on 100 Gbps offer high capacity and cost optimization, leveraging current DWDM infrastructure.
Telecommunications operators are facing constant changes in traffic profiles spurred by the evolution of access technologies and new customer applications. In this competitive marketplace, operators need to be ready to support the growth in bandwidth demand and ensure high quality services.
In order to meet the newest market trends, Padtec offers a complete series of 100 Gbps transponders, fully compatible with the LightPad i6400G Platform. Padtec’s 100 Gbps family is comprised of four line cards – Terminal, Regenerator, Muxponder and Flexponder – allowing operators to add capacity to its transmission network reducing the cost per transported bit.
The emergence of new broadband services
22
MU
X/D
EM
UX
MU
X/D
EM
UX
DWDM
R
R
MU
X/D
EM
UX
MU
X/D
EM
UX
DWDM
T100 GbE, OTU4
10x STM-64,10GbE (WAN/LAN),
8.5G FC ou OTU2/OTU2eM
...
T Terminal 100G
R Regenerador 100G
Muxponder 100G10 x 10G M
Flexponder 100G2 x 10G + 2 x 40G F
10x STM-64,10GbE (WAN/LAN),8.5G FC ou OTU2/OTU2e
M...
T 100 GbE, OTU4
2x STM-64,10GbE (WAN/LAN),8.5G FC ou OTU2/OTU2e10G FICON, SONET 256
...F
2x STM-256,40GbE, OTU3/OTU3e
2x STM-64,10GbE (WAN/LAN),
8.5G FC ou OTU2/OTU2e10G FICON, SONET 256
... F
2x STM-256,40GbE, OTU3/OTU3e
R
The new 100 Gbps transponders deploy second generation coherent detection providing an efficient and very robust solution to extended distances optical transport, besides reducing operational cost with intermediate dispersion compensation modules.
100G Line Cards
23
100 Gbps Transponders Family
Features
• DP-QPSK (Dual-Polarization Quadrature Phase Shift Keying)
• Transmission Power: 1 dBm
• Typical Sensitivity: -18 dBm
• OSNR Tolerance: 11.6 dB
• Chromatic Dispersion Tolerance: ± 250 ns/nm
• DGD Tolerance: 100 ps
Application
• Metropolitan, Long-Haul and Ultra-Long-Haul, including submarine applications
• Alien Waveleght Scenario
Models• Terminal: Transport of 100 GbE or
OTU4 signals• Muxponder: Allows the multiplexing
of 10 x 10 Gbps signals over a single DWDM OTU4
• Flexponder: Allows the multiplexing of 2 x 10 Gbps and 2 x 40 Gbps signals over a single DWDM OTU4
• Regenerator
DWDM Line Interface• OTU4 – 127 Gbps (32G Baud)• Coherent Detection – Allows
extension of optical links• Tunable laser at C+ and L Band • 37.5/50/100 GHz Channel Spacing
Client Interface• Terminal: - CFP Pluggable interface - 100 GbE - OTU4• Muxponder: - XFP Pluggable interface supports flexible applications - STM-64 - 10 GbE LAN/WAN - 8.5G Fibre Channel - OTU2/OTU2e• Flexponder: - XFP/QSFP+ Pluggable interface supports flexible applications - STM-64/STM-256 - 10 GbE LAN/WAN, 40GbE - 8.5G Fibre Channel - SONET 256 - 10G FICON - OTU2/OTU2e/OTU3/OTU3e
General Characteristics• SD-FEC and HD-FEC enhance
tolerance against non-linear effects and signal degrading
• High tolerance against Chromatic Dispersion and PMD (electronic compensating)
• 1+1 ODP Protection: Protects wavelength and transponder, based on signal failure or BER
• Protection switching time lower than 50 ms, according to ITU-T standards
• Compatible with OSNC (Optical SubNetwork Connection) protection
• Supports remote management through GCC0 (General Communication Channel)
• Compatible with 40 Gbps chassis
Management• Performance management
functionalities which allows traffic monitoring for SLA verification to assure high QoS per wavelength
• Fault management allowing quick event tracking contributing to increased traffic availability
• Tracing per wavelength which allows the verification of physical connectivity in complex networks as well as quick and effective installation and maintenance
Standards adopted• ITU-T G.709 and G.798, OIF Forum
100G Line Cards are compatiple with LightPad i6400G Compact chassi - 4RU
PDS
- E0
715V
3.1T
100
100 Gbps Transponders Family Increasing Bandwidth with Sustainable Power Consumption
padtec.com
Benefits• Adheres with global
environmental trends• Lower power consumption
in comparison to legacy transport rates: 17% up to 35%
• Savings in physical occupation
• Ease on power supply infrastructure
• Easy maintenance• TCO (Total cost of ownership)
optimization
Although optical networks have been adapted to meet the high demand for bandwidth, telecommunication operators are also dealing with the critical pressure of global environmental regulations and efficiency trends.
Padtec’s 100 Gbps family deploys an advanced and energy saving concept, allowing the operators to add transport capacity with sustainable power consumption and infrastructure optimization.
Compared with legacy rates as 10 Gbps and 40 Gbps, the ultra-broadband 100 Gbps solutions provided by Padtec perform an immediate reduction in energy consumption and reduces TCO (Total cost of ownership) by saving the physical usage of a system’s chassis.
Padtec‘s 100 Gbps family is the best solution for telecommunication companies that want to increase transmission capacity and gain power savings. Padtec’s solutions are environmentally conscious, while providing high capacity broadband services through innovative technology.
100G Line Cards are compatiple with LightPad i6400G chassi - 14RU
United StatesTel: +1 504 322-1185
MexicoTel: +52 55 [email protected]
Campinas - HQ in BrazilTel: +55 19 2104-9700Fax: +55 19 2104-9703
Tel: +54 11 [email protected]
SupportTel: +55 19 2104-9719
InformationTel: +55 19 2104-9700
