LIGHTING

P RO D U C T C ATA L O G

CALL

1-714-545-5560VISIT

WWW.WAMCOINC.COMEMAIL

INFO@WAMCOINC.COM LIGHTING

A d d r e s s a b l e C o l o r RG B AW L E D Tu b e s

S I Z E S AVA I L A B L E P RO D U C T D E S C R I P T I O N

2’ (Actual: 29-3/8”)

ĥ Individually addressable RGBAW LED T-12 Light Tubes.

ĥ Profile for set up on high end lighting consoles is; Generic RGBAW 8 bit. This will match up Color tubes with the existing Color Picker/Color programs libraries and indexes.

ĥ Or can be used on conventional lighting/dimming consoles 5 channels per Tube; Ch#1 Red, Ch#2 Green, Ch#3 Blue, Ch#4 Amber, Ch#5 White.

ĥ Each Color tube requires a 110VAC power input, and Data signal via DMX Micro USB. Also for the First Color Tube in the Data run the Tube will require a 5 pin DMX to Micro USB connector. DMX signal can then be jumped via Micro USB jumper cables for Approximately 25 Color Tubes, however each tube Still requires 110VAC individually.

4’ (Actual: 47-3/4”)

H i g h O u t p u t L E D Tu b e s

S I Z E S AVA I L A B L E P RO D U C T D E S C R I P T I O N

1’ ĥ Intent of use for this product is primarily for backlighting for translights or other various backings. When color temperature is

not an issue, just looking for exposure.2’

4’

B I - C o l o r L E D Tu b e s

S I Z E S AVA I L A B L E P RO D U C T D E S C R I P T I O N

1’

ĥ Intended for all uses that formerly required fluorescent tubes in either Daylight or Tungsten color temperatures.2’

4’

8’

P RO D U C T C ATA L O G

CALL

1-714-545-5560VISIT

WWW.WAMCOINC.COMEMAIL

INFO@WAMCOINC.COM LIGHTING

1 2 X 2 4 T R A N S L I G H T H A R N E S S

H a r n e s s

1 2 X 2 4 T R A N S L I G H T H A R N E S S T R AV E L C A S E

D 1 2 X 6 T R AV E L C A S E D 2 4 X 6 T R AV E L C A S E

Trave l C a s e s

D 1 2 X 6 F I X T U R E D 2 4 X 6 F I X T U R E

ĥ This is a 6 channel X 12 T-12 LED Light Fixture. 2 T-12 LED Lights per channel.

ĥ This is a 6 channel X 24 T-12 LED Light Fixture. 4 T-12 LED Lights per channel.

P RO D U C T D E S C R I P T I O N

ĥ Both fixtures are DMX addressable, or can be set to 000 and operate from the individual 6 switches on the back of the fixtures.

ĥ Requires 110VAC input. Also 5 pin DMX if operating from a lighting console.

ĥ No additional external dimming necessary for operating, just Data signal via 5 pin DMX and Hot 110VAC Edison power.

L i g h t F i x t u r e s

1 2 X 1 K S I L E N T S M A RT D I M M E R– W I F I T R A N S M I T T E R & R E C E I V E R

1 2 X 1 K S I L E N T S M A RT D I M M E R– W I F I R E C E I V E R

ĥ 12 channel X 1000watts Dimmer pack. Operates by Silent Smart Tech.

ĥ 2-Models, 1st With 2.4G WiFi Transmitting and Receiving capabilities. And an 8 output DMX amplifier onboard. The 2nd Model is a 2.4G WiFi Receiving unit only without the additional Amplifier outputs.

ĥ 12 Edison output plugs on back as well as 2 Soco outputs. Outputs can be used simultaneously not to exceed the wattage max per channel.

ĥ Has the ability to set and control channel outputs without a lighting control console connected. Also has 12 Pre-set Chases and Marquee build effects onboard with ability to change speed and intensity for use without a lighting console.

ĥ Ability to Soft patch channels. Options for Last Cue Hold, Out, or Program. Power Input, 110VAC, 100a Bates connector.

1 2 x 1 K S i l e n t S m a r t D i m m e r

RU B B E R C OAT E D T 1 2 C L I P S

O N E S I D E I N P U T P O W E R P L U G

A D D R E S S A B L E C O LO R T U B E M I C RO U S B – D M X J U M P E R

A D D R E S S A B L E C O LO R T U B E 5 P I N D M X TO M I C RO U S B A DA P T E R

A c c e s s o r i e s