LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners...
Transcript of LIGHTING FOR SECURITY DETENTION - · PDF fileLIGHTING FOR SECURITY DETENTION. ... Fasteners...
MIGHTY MAC™LIGHTING FOR SECURITY DETENTION
Table of conTenTswHaT'S NEw .............................................................3
LEvELS OF SECURITY ............................................4-5
HOUSING STYLES ..................................................6-7
pRODUCT UNIvERSE .............................................8-9
CELLS ..................................................................10-11
CORRIDORS ........................................................12-13
DaYROOm/CaTwaLk .........................................14-15
waSHROOm .......................................................16-17
CaFETERIa ...............................................................18
RECREaTION aREa .................................................19
SaLLY pORT .............................................................20
bUILDING mOUNTED ..............................................21
SpECIFICaTION paGES ......................................22-82
leTTeR fRoM THe PResIDenT
This product guide has been designed to provide speci-fiers of security detention lighting with the most objective information available for the selection of housing styles, materials, and light levels. by reviewing the introduction and supporting material for each specific security detention application in this guide, you'll benefit from kenall’s more than 20 years of security detention lighting experience.
Over the years, security detention lighting has developed through lighting manufacturers’ responses to specifica-tions from both the federal government and state correc-tional departments. although these unrelated government authorities each developed their own set of specifications, a number of categories and criteria have become acknowl-edged throughout the industry as “best practices” for lighting security detention facilities.
There are currently “best practices” for three areas of security detention lighting: housing style, material selec-tion, and lighting levels. Only lighting levels have been defined in terms of performance while the other areas are defined by features.
The first of these best practice categories is Housing Style. Two basic housing styles are typically used. One is a seam-welded housing with a hinged lens frame; the other is a seam-welded housing with an integral lens hinged to a baseplate. You'll find detailed information on the features and benefits of both styles on pages 6-7.
The second category, Materials and Gauges, pertains to both housings and lenses. a chart showing the materials and gauges recommended for different security levels can be found on page 4.
The final category is Lighting Levels. Recommended levels of illumination for most security detention facility areas are published in the Illuminating Engineering Society (IES) Handbook. The best practice for cell lighting levels in particular, however, has been developed by the american Correctional association. These aCa cell lighting levels are also on page 4 of this product guide.
Once you’ve selected the housing styles, materials and gauges, and light levels appropriate to your security deten-tion applications, you’ll find kenall mighty mac™ or mil-lenium™ products that will easily meet or exceed all your performance needs. In fact, the products presented in this guide are the finest lighting fixtures available anywhere for security detention applications including:• Cells • Cafeterias• Corridors • Recreation areas• Dayrooms/Catwalks • Sally ports• washrooms • building Exteriors
as president of kenall manufacturing, you have my assur-ance that the products presented in this guide have been designed and built to exhibit the very highest levels of design, materials, workmanship, and performance – the “best practices” – in security detention lighting.
Jim Hawkins, president, kenall manufacturing
� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
RMc conveRTIble fIxTuRe seRIes (Pgs. 12-13)
kenall’s new grid/flange convertible RmC series is the ideal solution when specifying fixtures for areas where the final ceiling type may be in question. This fixture series is easily con-verted between flange and grid by simply adding or removing a few brackets, thereby saving time and money should the ceiling design change after fixtures are ordered. The convertible fixture is available in flange/grid 1'x4', 2'x2', and 2'x4'.
WHaT's neW In secuRITY DeTenTIon lIgHTIng fIxTuRes
PRc HIgH PeRfoRMance seRIes (Pgs. 14-15)
The new T5HO high performance pRC series combines high lumen output with exceptional efficiency. This 6-lamp, 30,000 lumen fixture is an ideal replacement for 250-watt HID fixtures because it eliminates the long warm up time required by HID luminaires, thereby saving energy by allowing the lighting to be energized only when needed, as well as providing instant-on lighting after power interruptions. The pRC series is also available with a multi-circuit configuration to easily adjust light levels, and a self-contained emergency lighting system.
The pRC series is ideal for cafeterias, dayrooms, gymnasiums and any other applications traditionally illuminated by HID systems.
PRC Series Cross Section
MosT MIgHTY Mac seRIes aRe noW avaIlable WITH T5 anD T5Ho laMPs
Given the strict new energy guidelines adopted in many states, we have incorporated the T5 and T5HO lamp technology in our most popular housing styles. You will now find these energy efficient options in the lamp section on the individual product specification sheets (pages 22-82).
leD nIgHT lIgHTs
Combine energy efficiency with low maintenance costs with kenall's new LED Night Light option (DLN), offered with most mighty mac™ lighting fixtures. The LED circuit board night light allows the facility to field adjust light levels, thereby minimizing vandalism caused by excessive brightness. To check availability, see specification sheets (pages 22-82).
310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
levels of secuRITY anD InsTallaTIon DeTaIls
levels of secuRITY
kenall fixtures meet or exceed every security requirement for their intended application. whether a minimum, medium, maximum, or super-maximum application, our fixtures are engineered to resist everything from the most violent abuse to the cleverest attempts at tampering and concealment.
SECURITY LEvELS mINImUm mEDIUm maXImUm SUpER-maXImUm
Housing Gauge – CRS 18 16 14 12
Housing Gauge – SS 20 18 16 14
Lensing – polycarbonate .187" .250" .375" .500"
Lensing – Tempered Glass .250" .375" .500" .750"
Fasteners (Lock-Ups) Tp (tamperproof) Recessed Tp Recessed Tp Recessed Tp
RecoMMenDeD lIgHTIng levels (fooTcanDles)
Our fixtures’ optical systems are specifically engineered to provide Illuminating Engineering Society (IES), american Correctional association (aCa), and Federal bureau of prisons (FbOp)-recommended footcandle levels for their intended applications. because they utilize the most up-to-date lamp and ballast combinations, their energy efficiency matches their lighting performance.
RECOmmENDED LIGHTING LEvELS (FOOTCaNDLES)
appLICaTION IES RECOmmENDED aCa REqUIRED FbOp REqUIRED
Cells N/a 20 FTC* 20 FTC
Corridors 10-20 FTC
Dayrooms 30-50 FTC
Catwalks 10-20 FTC
washroom 20 FTC
Showers 10 FTC
Cafeteria 5-10 FTC
kitchens 50-100 FTC
Recreation area 30 FTC
Sally port 20 FTC
* Grooming and desk area only
4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
InternalToolless Fasteners
Optional Removable Gear Tray
Mounting AccessHoles (2)
Wiring AccessHole with Cover
Housingwith Lens
Baseplate
InsTallaTIon anD MaInTenance
Not only are kenall's security detention fixtures tamper-resis-tant and able to withstand the critical environments of security facilities, they are easy to install and maintain. The drawings
below illustrate some of the features designed to ensure simple installation and quick, easy maintenance by authorized personnel.
DoorFrAme HousInG styLe
• Caulkable (e.g., pecora Dynapoxy or Sika Dural)• Full length external hinge for ease of servicing• Cell fixtures feature internal hinges• available with knockouts for surface conduit
InternalToolless Fasteners
Mounting AccessHoles (2)
Wiring AccessHole with Cover
Housing
Door & Lens
CLAmsHeLL HousInG styLe
• Irretrievable bladetrap/contraband drop slot• Embossed mounting holes• Internal hinge (2' or full length)• Recessed fasteners• Housing hinges from either side of baseplate
Optional Removable Gear Tray
�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
claMsHell HousIng feaTuRes
• One-piece prime grade material housing.• Corners continuously seam welded and smooth with no post grinding.• TGIC polyester powder coat finish, 5-stage pre-treatment, 1,000-hour salt spray tested, 92% reflectance.
HousIng sTYles – claMsHell
Embossed standoffs allow the most secure fixture installation without fixture distortion.
Fully recessed fasteners resist gripping/prying and prevent unauthorized fixture entry.
vertically adjustable, continuous "Z"- bracket lens retention system is secured to housing withheavy gauge thru-studs - 6" maximum spacing.
Optional removable power tray with quick disconnects and fixture housing design reduces installation and maintenance time.
Reversible, concealed hinging prevents fixture tampering.
Die-formed blade trap (3/8" minimum depth) prevents concealment of weapons and contraband.
Slope-sided design maximizes resistance to physical abuse.
6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
vertically adjustable, continuous "Z"- bracket lens retention system is secured to housing withheavy gauge thru-studs - 6" maximum spacing.
Optional removable power tray with quick disconnects and fixture housing design reduces installation and maintenance time.
Completely concealed hinging prevents fixture tampering.
DooRfRaMe HousIng feaTuRes
• One-piece prime grade material housing.• Corners continuously seam welded and smooth with no post grinding.• TGIC polyester powder coat finish, 5-stage pre-treatment, 1,000-hour salt spray tested, 92% reflectance.• kenall recommends using security strength caulking material to reduce risk of contraband storage.
HousIng sTYles – DooRfRaMe
Fully recessed fasteners resist gripping/prying and prevent unauthorized fixture entry.
Slope-sided design maximizes resistance to physical abuse.
710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
ceIlIng MounT
SSa/SSb/SSC/SSD Surface/Clamshellpages 11, 13, 15, 23, 27-29
SSaT5 Surface/Clamshell pages 11, 24
SCa/SCb/SCC/SCD Surface/Clamshellpages 30-33
SDa/SDDSurface/Hinged Doorpages 11, 13, 15, 34-35
SDSaSurface/Hinged Doorpage 25
SDSaT5Surface/Hinged Doorpage 26
pSDT5Surface/Hinged Doorpage 36
SCTSurface/Clamshellpage 38
SCHSurface/Clamshellpage 37
RCa/RCb/RCC/RCD Recessed Flange/ Doorframepages 13, 17, 18, 42-45
RGa/RGDRecessed Grid/Clamshellpages 18, 46-47
RmCa/RmCD Recessed Grid/Doorframepages 13, 18, 19, 39-40
pRCT5Recessed Grid/Clamshellpages 15, 18, 19, 41
secuRITY DeTenTIon lIgHTIng PRoDucT unIveRse
Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom
Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom Cells Corridors Dayroom
Washroom Sally Port Dayroom Dayroom
Corridors Cafeteria
Cells
Corridors
Washroom
Cafeteria
Rec Area
Sally Port
N548/N1048Surface/Ceiling or wall mountpages 17, 20, 75-76
SH524-548/SH824-848/SH1248Surface/Ceiling or wall mountpages 20, 77-79
Washroom Sally Port Washroom DayroomDayroom Sally Port
8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
wCUSurface/Clamshellpages 11, 48
wCHSurface/Clamshellpage 49
wCbUSurface/Clamshellpage 50
wCbSurface/Clamshellpage 51
wCTSurface/Clamshellpage 52
wCDSurface/Clamshellpage 53
wDUSurface/Hinged Doorpage 54
wDDSurface/Hinged Doorpage 55
wDSSurface/Clamshellpage 56
RFw - Step Light Recessed Flangepage 57
Wall MounT
Cells Washroom Cells Washroom Cells Washroom Cells Washroom Cells Washroom
Cells Washroom Cells Washroom Cells Washroom Cells Washroom Corridor
CCSurface/Clamshellpages 11, 17, 58
CD Surface/Hinged Doorpage 59
mmEX mighty mac Exit Sign wall/Ceiling mountpage 72
mETSw/mETSU/mETDU millenium metrex Exit Signs wall/Ceiling mountpages 73-74
Cells Washroom Cells Washroom
coRneR MounT
SSqaSurface/Clamshellpage 60
SqCaSurface/Clamshellpage 61
SqDa/SqDb/SqDC/SqDD Surface/Hinged Doorpage 15, 19, 62-65
RqCa/RqCb/RqCD Recessed Flange/Grid Clamshellpages 15, 17, 19, 66-68
Rqpa/Rqpb Recessed Flange/ Clamshellpages 69-70
Cells Corridors Rec Area DayroomsCorridors Cafeteria Corridors Cafeteria Rec Area Washroom Rec Area Dayrooms Washroom Rec Area Dayrooms
ceIlIng squaRes
coMPleMenTaRY PRoDucTs
wSp/wpp - wall platesSurface & Concrete pourpage 71
�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
cells
because of the highly demanding nature of the application, the cell is the focus of the security detention lighting industry. Cell lighting must be able to withstand extreme physical abuse, clever entry and conceal-ment attempts, and repeated tampering.
levels of secuRITY
because inmates are unsupervised for the majority of their in-cell time, cells represent the toughest possible environ-ment for lighting fixtures. That’s why kenall’s maximum security fixtures incorporate best practices such as fully recessed fasteners and irretrievable blade traps designed to effectively resist unauthorized fixture entry and tampering. In addition, 16,14, or 12-gauge housing construction and a wide selection of impact resistant lensing materials and thickness-es mean they’ll withstand exceptionally high levels of abuse at any security level.
InsTallaTIon anD MaInTenance
Our optional removable gear tray makes kenall cell light-ing fixtures a snap to install and maintain. Using a special, tamper-proof screwdriver, maintenance personnel can easily remove the power tray using the quick-connect plug, and replace the tray with a spare assembly, reducing the amount of time spent in the cell. Necessary repairs can be com-pleted back in the maintenance shop rather than in the cell. with kenall’s effective and efficient housing, removable gear tray and modular design, installation and maintenance time is minimized.
RecoMMenDeD lIgHT levels
kenall’s efficient optical systems provide high levels of uniform lighting that meet or exceed aCa’s required 20 footcandles at the desk and grooming area with a single ceiling-mounted fixture. If preferred, kenall also offers wall and corner mounted fixtures for both overall and localized cell illumination. kenall's optional heavy gauge mechanical and solid state electronic switching devices allow detain-ees to adjust light output to comfortable levels within aCa guidelines.
HousIng sTYles
Two different housing styles are available for cell lighting applications: clamshell and doorframe. In the clamshell version, the housing is attached to a baseplate by an internal hinge that is protected from tampering by an integral blade trap. It is important to note that the clamshell is not designed for use with surface conduit or surface caulking. The doorframe version features a hinged door providing access to the fixture’s interior and is protected against tampering by pickproof caulking material (by others).
Kenall cell fixtures meet or exceed the ACA requirement of 20 footcandles of
illumination for desk and grooming areas.
10 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
Cell (CC Corner Surface 3 Lamps/F32T8)
11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. CC4-0/0-3-32-EB-1-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 38 48 28 1.4:1 1.7:1 Grooming 34 67 19 1.7:1 3.5:1 Room 33 49 19 1.7:1 2.6:1
Cell (WCU Wall Surface 1 Lamp Up, 2 Lamps Down/F32T8)
11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. WCU4-0/0-1/2-32-EB-1-1/9-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 44 55 32 1.4:1 1.7:1 Grooming 51 136 20 2.6:1 6.9:1 Room 32 60 18 1.8:1 3.3:1
Cell (SDA Ceiling Surface 3 Lamps/F32T8)
11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. SDA4-0/0-3-32-EB-1-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 42 54 31 1.4:1 1.8:1 Grooming 44 88 23 1.9:1 3.8:1 Room 45 70 22 2.0:1 3.1:1
PHoToMeTRIcs – TYPIcal cell
Cell (SSAT5 Ceiling Surface 2 Lamps/F54T5HO)
11’ x 7’ x 8’ Area 70/70/20 Room Reflectance, .80 LLF (Source: ACA)Catalog No. SSAT5-0/0-2-54-EB-1-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Desk 56 71 43 1.3:1 1.6:1 Grooming 65 113 37 1.7:1 3.0:1 Room 59 87 32 1.9:1 2.8:1
40
40
37
48
49
46
41
57
60
58
52
44
65
73
75
68
56
44
86
93
89
74
57
112
113
99
76
5764
71
5359
65
4853
59
4347
51
32 36 42 48 53 58 60 60 58 53 48 42 37 32
35 40 47 54 61 66 69 69 66 61 54 47 41 35
38 43 50 59 67 73 77 77 73 67 59 51 44 38
39 46 54 63 72 79 83 83 79 72 63 54 47 40
40 47 56 65 75 83 87 87 83 76 66 56 48 41
75 83 87 87 83 76 66 56 48 41
80 83 83 79 72 63 54 47 40
74 77 77 74 67 60 51 44 38
67 70 70 41 36
59 61 61 37 32 24
24
23
29
30
29
25
35
39
38
33
27
41
49
51
46
36
27
60
68
65
52
37
84
88
74
53
43
48
55
39
44
50
35
39
44
31
34
38
23
26
31
36
40
44
46
46
44
40
36
31
26
23
25
29
34
41
47
51
54
54
51
46
41
34
30
26
27
32
38
45
52
58
61
61
58
52
45
38
32
28
29
34
41
49
57
63
67
67
63
57
49
41
35
29
29
35
42
51
59
66
70
70
66
59
51
42
35
30
59
66
70
70
66
59
51
42
35
30
63
67
67
63
57
59
41
34
29
57
61
61
58
52
45
38
32
28
51
54
54
29
25
44
46
46
26
23
24
22
20
32
27
23
20
46
37
29
24
21
63
50
37
29
23
21
68
49
36
28
23
63
45
33
26
36
43
48
35
41
46
32
37
42
28
33
37
19
21
23
24
26
28
29
30
30
29
28
26
25
22
20
22
24
26
28
30
31
32
32
31
30
28
26
24
21
23
25
27
30
32
34
35
35
34
32
30
28
25
22
24
26
29
32
35
37
39
39
38
35
33
30
27
22
24
27
31
34
38
41
42
42
41
38
35
32
28
36
41
44
46
46
44
41
37
33
29
43
47
49
49
47
43
38
33
28
42
47
49
49
47
42
37
32
27
39
43
46
29
25
33
36
39
24
21
48
33
24
72
46
30
23
103
65
40
27
21
136
90
54
35
25
20
115
70
44
29
22
87
54
35
25
51
54
55
46
48
49
39
41
42
32
34
36
18
20
21
22
24
24
25
25
24
23
22
21
19
18
19
21
22
24
25
26
27
27
26
25
23
22
20
19
21
22
24
26
28
29
30
30
29
27
26
23
22
20
22
24
26
29
32
43
35
35
33
31
29
26
24
22
23
26
29
33
36
39
40
40
38
35
32
28
25
23
41
45
47
47
44
40
35
31
27
24
51
53
53
50
45
39
33
29
25
55
58
58
54
48
41
34
29
25
56
60
59
28
25
53
56
56
26
22
RecoMMenDeD cell fIxTuRes
SSaT5CEILING mOUNT SURFaCEpage 24
SDaCEILING mOUNT SURFaCEpage 34
CCCORNER mOUNT SURFaCEpage 58
wCUwaLL mOUNT SURFaCE Up/DOwNpage 48
1110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
coRRIDoRs whether your corridor project has a security, suspended, metal pan, or gypsum ceiling, kenall has a convertible fixture design perfectly suited to the ceiling type.
InsTallaTIon anD MaInTenance
because it works with most ceiling types, kenall’s convertible fixture is ideal when a corridor ceiling design has not been determined or is expected to change in the future.
levels of secuRITY
Since corridors are typically supervised, they do not require the use of maximum security fixtures. Designed to accommodate a variety of applications, kenall’s exclusive new convertible recessed fixture can be specified with a 16-gauge steel hous-ing and .187" to .250" lensing.
RecoMMenDeD lIgHT levels
all our recommended corridor fixtures easily produce the 10-20 footcandles recommended by the IES for detention facility corridor applications.
aesTHeTIcs
Due to the reduced security requirements, many minimum security facilities need not appear as "institutional" as other correctional facilities. kenall’s high abuse fixtures may be used to give common areas a more residential feel in those applications.
Kenall’s unique convertible fixture accommodates a variety of corridor ceiling types.
1� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
PHoToMeTRIcs – TYPIcal coRRIDoR
Corridor (RMCD Ceiling Recessed 3 Lamps/F32T8)
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. RMCD4-FL-0/0-3-32-EB-1-120-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 19 27 13 1.4:1 2.0:1
Corridor (SSC Ceiling Surface 3 Lamps/F32T8)
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. SSC4-0/0-3-32-EB-1-1/9-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 21 28 16 1.3:1 1.7:1
Corridor (SDA Ceiling Surface 2 Lamps/F54T5HO)
10’ x 50’ x 9’ Area, 9’ Ceiling Mounting Height80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. SDA4-0/0-2-54-EB-1-120-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Corridor 21 28 15 1.4:1 1.9:1
1923
2626
2319
1923
2626
2319
1720
2222
2017
1517
1818
1714
1315
1616
1513
1315
1616
1513
1517
1919
1715
1821
2323
2118
2023
2727
2320
2024
2727
2320
1821
2323
2118
1517
1919
1715
1315
1616
1513
2024
2828
2420
2024
27
2724
20
1821
2424
2118
1618
2020
1816
1516
1818
16
15
1517
18
18
17
15
1719
21
2119
17
1922
2525
2219
2125
2828
2521
2125
2828
2521
1922
2525
2219
1719
2121
1917
1517
1818
17
15
22
25
27
27
25
22
22
25
27
27
25
22
20
22
24
24
22
20
19
19
20
20
19
17
16
17
18
18
17
16
16
18
19
19
18
16
16
20
21
21
20
18
21
23
25
25
23
21
23
26
28
28
26
22
23
26
28
28
26
22
21
23
25
25
23
21
16
20
21
21
20
18
16
18
19
19
18
16
RecoMMenDeD coRRIDoR fIxTuRes
SSbCEILING mOUNT SURFaCEpage 27
SDaCEILING mOUNT SURFaCEpage 34
RCaCEILING mOUNT RECESSED FLaNGE/GRID page 42
RmCDCEILING mOUNT RECESSED FLaNGE/GRID page 40
1310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
DaYRooM/caTWalk
Combined catwalks and open dayroom areas call for variations in lighting fixtures. Ceiling mounted luminaires of the High abuse category, such as kenall’s millenium Stretch™, often provide sufficient durability for dayroom use while also avoiding the warm-up time problem of HID systems. Security level fixtures are appropriate for use on catwalks and similar locations where fixtures may be accessible to detainees.
RecoMMenDeD lIgHT levels
a wide selection of kenall fixtures meet or exceed the 30-50 footcandles recommended by the IES for dayroom applications, while lighting catwalks to the 10-20 IES-recommended footcan-dle level is easily achieved with any of kenall’s security fixtures. Our security fixtures are also 10% to 15% more efficient than the industry standard – an important consideration in the design of any public facility.
levels of secuRITY
being supervised areas, dayrooms can utilize less severe looking, ceiling-mounted high abuse fixtures. because lighting fixtures for catwalks that overlook dayrooms are more acces-sible, security category fixtures are recommended.
InsTallaTIon anD MaInTenance
both our high abuse and security fixtures are designed for easy installation and maintenance. Our security clamshell housing style fixtures, for example, feature housings keyed on both sides. Since the baseplate can be installed first, there’s no need to support the entire fixture weight during installation. mainte-nance is particularly easy when you specify kenall's innovative removable gear tray that comes complete with electrical quick connects. In the high abuse category, millenium Stretch’s Ip64 rating ensures the fixture is sealed against moisture and dust, eliminating maintenance headaches for years to come. because it works with most ceiling types, our recessed convertible fixture is ideal when a dayroom or catwalk ceiling type has not been determined, or is expected to change in the future.
aesTHeTIcs
with its sleek, extruded aluminum linear housing, optical quality lens, and choice of colored joiner pieces, millenium Stretch helps de-institutionalize the look of most dayrooms. and while no fixture appropriate for use in catwalk areas is designed with aesthetics as a high priority, the expertly designed mounting details, powder-coated finish, and lack of visible hardware of kenall security fixtures make them clean-looking and unobtrusive.
...while high abuse lighting, such as our Millenium Stretch™, can often be used to
de-institutionalize the look of dayrooms.
Recessed security fixtures are an appropriate choice for catwalk lighting...
14 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
PHoToMeTRIcs – TYPIcal DaYRooM
Dayroom (PRCT5 Ceiling Recessed 6 Lamps/F54T5HO; SSA Ceiling Surface 2 Lamps/F32T8)
80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. PRCT5-0/0-6-54-PB-2-1/B-1, SSA4-0/0-2-32-EB-1-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 52 61 43 1.2:1 1.4:1 Catwalk 14 22 10 1.3:1 2.1:1
Dayroom (MLHA1248 Ceiling Surface 4 Lamps/F54T5HO; SSA Ceiling Surface 2 Lamps/F32T8)
80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. MLHA12-48-F-MW-CP-4-54-PB-2, SSA4-0/0-2-32-EB-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 47 50 37 1.3:1 1.4:1 Catwalk 13 19 10 1.3:1 2.0:1
Dayroom (RQCD Ceiling Squares Recessed 1 Lamp/400 Watt MH; SDA Ceiling Surface 2 Lamps/F32T8)
80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)Catalog Nos. RQCD-1/1-1-400M-DT-A/1-1, SDA4-0/0-2-32-EB-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 48 54 33 1.5:1 1.6:1 Catwalk 11 16 8 1.3:1 1.9:1
Dayroom (SQDC Ceiling Squares Surface 1 Lamp/150 Induction; SSA Ceiling Surface 2 Lamps/F32T8)
80’ x 50’ x 20’ Type Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. SQDC-0/0-1-150IND-EB-1-120-1/C-1, SSA4-0/0-2-32-EB-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Dayroom 40 43 33 1.2:1 1.3:1 Catwalk 10 14 8 1.4:1 1.9:1
37
45
44
46
48
46
47
48
45
47
49
45
47
48
45
47
47
44
45
40
39
48
48
48
50
48
49
49
48
49
50
48
48
50
48
49
50
48
48
42
40
47
48
48
48
47
47
47
47
47
48
47
47
48
47
48
48
48
48
41
39
47
48
48
47
47
47
46
47
47
47
47
46
47
47
47
48
48
47
39
40
48
49
48
48
48
47
47
47
47
47
47
47
47
48
48
48
49
48
41
41
50
50
50
49
49
49
48
48
49
49
48
48
49
49
49
50
50
50
41
41
50
50
50
49
49
49
48
48
48
48
48
48
49
49
49
50
50
50
42
41
50
50
50
49
49
49
48
48
49
49
48
48
49
49
49
50
50
50
41
40
48
49
48
48
48
48
47
47
47
47
47
47
48
48
48
48
49
48
41
39
48
48
48
47
48
47
47
47
47
47
47
47
47
48
47
48
48
48
40
40
48
48
48
48
48
48
48
47
48
48
47
47
48
48
48
48
48
48
41
40
48
48
49
50
49
49
50
48
49
50
48
49
50
48
49
50
48
48
42
37
44
44
46
48
46
47
48
46
47
49
45
47
48
45
47
47
44
45
40
45 52 51 53 53 51 54 55 51 53 51 55 54 51 53 53 51 53 46
48 56 55 55 54 54 55 55 53 54 53 55 55 54 55 55 55 57 48
43 52 50 49 48 48 49 49 47 47 47 49 49 48 48 49 51 53 44
45 54 53 51 49 50 51 51 50 48 50 51 51 51 50 52 54 55 46
51 59 59 57 55 56 57 57 56 54 56 57 57 57 55 57 60 60 51
49 58 57 55 53 55 55 55 54 52 54 55 55 49
54 56 58 59 50
45 54 53 51 49 49 50 50 49 47 49 50 50 49
49 51 54 55 46
49 58 57 55 53 55 55 55 54 52 54 55 56 49
54 56 59 59 50
50 59 59 57 55 56 57 57 56 54 56 57 57 48
55 57 60 60 51
45 54 53 51 50 51 51 51 50 48 50 51 52 48
50 52 54 55 46
43 52 51 49 48 48 49 49 47 47 47 49 49 48
48 50 51 53 44
48 57 55 55 55 54 56 56 53 54 54 56 56 48 55 55 56 57 49
45 52 51 52 53 51 54 54 51 53 51 54 54 45
53 53 51 52 45
5354
4748
5452
4752
5448
4754
53
33 38 37 40 40 38 40 40 38 40 40 38 40 40 38 40 40 37 38 33
35 41 41 42 43 41 42 42 41 42 42 41 42 42 41 43 42 41 41 35
34 40 40 41 41 40 40 40 40 40 40 40 40 40 40 41 40 40 40 34
34 40 40 40 40 40 40 39 40 40 40 39 39 40 40 40 40 40 39 33
35 41 41 41 41 41 41 40 40 40 40 40 40 41 41 41 41 41 40 35
35 42 43 42 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 35
36 42 43 43 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 36
35 42 43 42 42 42 42 41 41 42 42 41 41 42 42 42 42 42 41 35
35 41 41 41 41 41 41 40 40 41 41 40 40 41 41 41 41 41 40 35
34 40 41 41 40 40 40 40 40 40 40 40 40 40 40 40 40 40 39 34
35 41 41 41 41 41 41 41 40 41 41 40 41 41 41 41 41 40 40 35
35 42 41 43 43 41 43 43 41 43 43 41 43 43 41 43 42 41 41 35
33 38 37 40 40 38 40 40 38 41 41 38 40 40 38 40 40 37 38 33
34
41
42
44
46
44
46
48
45
47
48
45
47
47
44
45
45
41
41
36
37
45
47
49
50
49
51
52
50
52
52
50
51
51
49
50
50
47
45
39
37
45
48
49
50
50
51
52
51
51
51
51
52
51
50
50
50
47
44
38
37
45
48
50
50
51
52
52
52
52
52
52
52
52
51
50
50
48
44
37
38
45
49
51
51
52
53
53
53
53
53
53
53
53
52
51
51
48
45
38
38
46
50
52
52
53
54
54
54
54
54
54
54
54
53
52
51
49
45
38
39
46
50
52
52
53
53
54
54
53
53
54
54
53
52
52
51
49
45
38
38
46
50
52
52
53
54
54
54
54
54
54
54
54
53
52
51
49
45
38
38
45
49
51
51
52
53
53
53
53
53
53
53
53
52
51
51
48
45
38
37
45
48
50
50
51
52
52
52
52
52
52
52
52
51
50
50
48
44
37
37
45
48
49
50
50
51
52
51
51
52
51
52
51
50
50
50
47
45
38
37
45
47
49
50
49
51
52
50
51
52
50
51
51
49
50
50
46
45
39
33
40
41
44
46
44
46
47
45
46
47
45
46
47
44
45
45
41
40
36
RecoMMenDeD DaYRooM fIxTuRes
SqDCCEILING mOUNT SURFaCE HID/INDUCTION page 64
SSaCEILING mOUNT SURFaCEpage 23
mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™
pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41
1�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
WasHRooM
kenall meets challenging washroom lighting requirements with fixtures that are safe, secure, and impervious to the rust and corrosion typically caused by washroom moisture.
InsTallaTIon anD MaInTenance
Due to the regular exposure of washroom lighting to moisture, maintenance can be an ongoing and expensive issue if fixtures aren’t properly designed for use in wet environments. Speci-fied as “wet Location Listed,” kenall’s stainless steel security fixtures are resistant to the rust and corrosion that results in excessive maintenance and replacement.
levels of secuRITY
Since light fixtures may be accessible to detainees in unsuper-vised washrooms, security level fixtures are recommended. kenall offers medium and maximum security ceiling and corner mounted security-classification fixtures, both of which deliver unsurpassed quality and durability for washroom applications.
RecoMMenDeD lIgHT levels
The IES recommends 10 footcandles for shower areas and 20 footcandles at the mirrors – levels easily achieved with kenall’s washroom-recommended fixtures. Corner mount fixtures are typically used over mirrors at sink locations while ceiling-mounted fixtures are typically applied in shower areas.
HousIng sTYles
most security detention washroom fixtures use the doorframe housing style. The doorframe version provides access to the fixture’s interior by means of a hinged door and is protected against tampering by pickproof caulking material (by others). The doorframe style is also available with a wet Location listing.
aesTHeTIcs
with their stainless steel construction and powder coat finishes, kenall’s recommended washroom fixtures won’t suffer from the moisture-related problems that make most security detention fixtures look old and need replacement before their time.
Wet Location Listed (WL option) Kenall security fixtures resist the rust
and corrosion-causing conditions present in institutional washrooms.
16 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
PHoToMeTRIcs – TYPIcal WasHRooMWashroom (RQCA Ceiling Squares Recessed 1 Lamp/42 Watt PLT; CC Corner Surface 2 Lamp/F32T8)
20’ x 15’ x 9’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. RQCA-0/0-1-42P-EB-1-1/B-1, CC-0/0-2-32-EB-1-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Entry 22 24 21 1.1:1 1.2:1 Sink 42 51 31 1.4:1 1.7:1 Shower & General Area 42 65 19 2.2:1 3.4:1
Washroom (N1048 Ceiling Surface 2 Lamps/F32T8, N548 Ceiling Surface 1 Lamp/F32T8)
20’ x 15’ x 9’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog Nos. N1048-C-2-32-EB/1-120, N548-C-1-32-EB-1-1R
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Entry 20 22 18 1.1:1 1.2:1 Sink 33 41 25 1.3:1 1.6:1 Shower & General Area 32 51 14 2.3:1 3.7:1
RecoMMenDeD WasHRooM fIxTuRes
RCaCEILING mOUNTRECESSED FLaNGE page 42
CCCORNER mOUNT SURFaCEpage 58
N1048CEILING mOUNT SURFaCENOva™ page 76
2131
3537
3540
42
3843
45
4146
49
4248
50
4248
51
4146
50
3944
47
3540
43
3135
37
2223
2221
2224
2423
22
2224
2423
22
2123
2323
21
3031
3541
4243
4655
5647
4645
4736
3938
37
3542
4949
5555
4746
4647
32
4043
4650
5453
5146
4747
3735
3636
4345
4747
5151
5048
4648
3941
4140
4346
4646
4748
4948
4746
32
4244
4444
4444
45
42
42
43
42
4240
42
41
40
38
36
32
39
38
37
35
33
29
36
36
34
32
30
28
3031
30
2827
25
4545
4331
2522
19
3536
3739
3940
4054
5546
4543
4634
3433
32
3737
3940
4040
4053
5545
4542
4533
3839
4041
4241
4154
5444
4442
4434
3940
40
3839
4142
4342
4154
5443
4241
4331
3233
32
3840
4243
4343
4253
5442
4241
4327
3840
4143
4343
4252
5342
4241
4336
3942
42
3940
4243
4444
4352
5342
4242
4536
3637
37
3942
4546
4747
4654
5443
4343
4735
4553
5657
5756
5765
6348
4748
5243
4549
44
1825
2729
2830
32
3033
35
3336
38
3437
40
3438
41
3337
40
3134
37
2831
33
2528
29
2021
2018
1921
22
2119
1921
2221
19
1820
2120
18
1619
2125
2729
2933
3340
3637
3732
3225
24
2830
3232
3434
3936
3636
29
2932
3434
3537
3936
3636
3124
2322
3133
3635
3639
3937
3636
3030
2423
3235
3737
3839
3938
3635
26
3235
3737
3838
37
3335
3737
3836
3334
3535
3532
3133
3433
3230
2931
3131
3028
2526
2726
2624
3734
3225
1815
14
1919
2122
2627
2732
3339
3737
3832
2322
20
2121
2224
2627
2732
3239
3738
3933
2323
2426
2727
2732
3241
3638
4034
3431
30
2424
2527
2827
2732
3242
3638
4033
2724
22
2424
2627
2828
2731
3242
3738
4033
2324
2626
2727
2731
3141
3738
4035
3528
27
2324
2626
2727
2731
3241
3839
4035
3127
26
2325
2728
2828
2831
3342
4041
4236
2731
3334
3534
3437
4351
4748
4943
3529
28
N548CEILING mOUNT SURFaCENOva™ page 75
1710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2935
4246
4541
3838
4247
4947
4239
3942
4647
4336
3444
5561
5851
4545
5159
6359
5146
4551
5962
5745
3650
6370
6656
4848
5668
7368
5648
4856
6772
6651
3040
5156
5245
3939
4554
5854
4539
3945
5457
5342
3750
6471
6656
4848
5768
7368
5748
4856
6872
6652
3545
5561
5851
4646
5260
6460
5246
4652
5962
5747
3036
4245
4441
3939
4246
4846
4239
3942
4546
4337
2428
3134
3433
3232
3335
3635
3432
3233
3434
3229
2022
2426
2626
2626
2728
2828
2727
2627
2726
2523
2022
2426
2626
2626
2728
2828
2727
2627
2726
2523
2528
3234
3433
3232
3436
3636
3432
3233
3534
3330
3036
4246
4541
3939
4247
4846
4239
3942
4646
4337
3645
5661
5952
4646
5260
6460
5347
4752
6062
5847
3751
6471
6756
4849
5768
7468
5749
4957
6872
6652
3141
5157
5345
3940
4655
5954
4640
4046
5458
5443
3750
6471
6756
4949
5769
7469
5749
4957
6873
6752
3645
5661
5952
4647
5360
6460
5347
4752
6062
5847
3036
4245
4541
3939
4246
4846
4239
3942
4546
4337
2528
3234
3435
3232
3436
3736
3433
3333
3535
3329
2123
2526
2727
2627
2728
2828
2727
2727
2726
2523
2123
2526
2727
2627
2728
2928
2727
2727
2727
2523
2528
3234
3433
3232
3436
3736
3433
3334
3535
3329
3036
4246
4541
3939
4247
4847
4339
3942
4646
4337
3646
5661
5952
4647
5361
6460
5347
4752
6063
5847
3851
6471
6757
4949
5769
7469
5749
4957
6872
6753
3141
5157
5345
3940
4655
5954
4640
4046
5458
5443
3750
6471
6756
4849
5768
7468
5749
4957
6873
6752
3645
5661
5952
4647
5260
6460
5347
4752
5962
5847
3036
4245
4541
3939
4246
4846
4239
3942
4546
4337
2528
3234
3433
3232
3436
3736
3432
3233
3535
3330
2022
2426
2626
2626
2728
2828
2727
2627
2726
2523
2022
2526
2626
2626
2728
2828
2727
2627
2726
2523
2428
3134
3433
3232
3435
3635
3432
3233
3434
3229
3036
4245
4541
3939
4246
4846
4239
3942
4546
4337
3545
5561
5851
4646
5260
6460
5246
4652
5962
5747
3750
6471
6656
4848
5768
7368
5749
4957
6872
6652
3040
5156
5245
3939
4554
5854
4539
3945
5457
5342
3650
6371
6656
4848
5668
7368
5648
4856
6772
6651
3444
5561
5851
4545
5159
6359
5246
4651
5962
5746
2935
4246
4541
3839
4246
4947
4239
3942
4647
4336
cafeTeRIa
Only kenall offers maximum security detention lighting fixtures listed with the National Sanitation Foundation (NSF). Designed for use in food preparation, serving, and dining areas, NSF-listed security deten-tion lighting meets the toughest safety standards while providing the security necessary for cafeteria use.
levels of secuRITY
kenall's National Sanitation Foundation listing assures that security detention lighting fixtures specified with this option are toxic-free, corrosion resistant, and easy to clean.
RecoMMenDeD lIgHTIng levels
The IES recommends a minimum of 5-10 foot-candles average illumination for institutional eating areas and 50-100 footcandles for institutional kitchens. kenall’s ceiling mounted maximum secu-rity fixtures can easily meet these recommended levels. kenall security fixtures are also 10% to 15% more efficient than the industry standard – an important consideration in the design of any public facility.
InsTallaTIon anD MaInTenance
kenall’s optional Removable Gear Tray means that any servicing of our maximum security fixtures can be performed in just a matter of minutes. Specifying the NSF Splash Non-Food Zone (SN) option ensures unmatched ease of cleanability.
HousIng sTYles
a typical cafeteria uses the doorframe housing style. The doorframe version features a hinged door providing access to the fixture’s interior and is protected against tampering by pickproof caulk-ing material (by others).
RecoMMenDeD cafeTeRIa fIxTuRes
RCaCEILING mOUNT RECESSED FLaNGE page 42
RGDCEILING mOUNT RECESSED FLaNGE page 47
RmCDCEILING mOUNT RECESSED FLaNGE/GRID page 40
PHoToMeTRIcs – TYPIcal cafeTeRIa
Cafeteria (PRCT5 Ceiling Recessed 4 Lamps/F54T5HO)
80’ x 40’ x 10’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. PRCT5-0/0-4-54-PB-2-1/B-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Cafeteria 44 74 20 2.2:1 3.6:1
When specified with the NSF-listed option (SN), our security fixtures provide unmatched safety and
security for cafeterias and food preparation areas.
pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41
18 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2123252627282929292929292929282726252321
2225262829303131313131313131302928262422
2426283031323233333333333332323130282624
2527293132333434343434343434333231292725
2628303233343535353535353535343332302826
2629313334353636363636363636353433312926
2730323335363737373737373736363433312927
2830323435363737383838383737363534322927
2830323436373838383838383837373534323028
2931333536373838383838383838373634333028
2831333536373838393939393838373635333128
2931333536373839393939393938373635333128
2931333536373839393939393938373635333129
2931333536383839393939393938373635333129
2931333536383939393939393938383635333129
2931333536383939393939393938383635333129
2931333536383839393939393938383635333129
2931333536383839393939393938373635333129
2931333536373839393939393938373635333129
2831333536373838393939393838373635333129
2931333536373838383939383838373634333129
2830323436373838383838383838373534323028
2830323435363738383838383837363534323028
2730323335363737373737373737363533312927
2629313334353636363636363636353433312926
2628303233343535353535353535343332302826
2527293132333434343434343434333231292725
2326282931323233333333333332313129282623
2224262829303131313131313130302928262422
2123242627282829292929292928282726242321
RecReaTIon aRea
kenall makes fixtures for indoor recreation areas of all ceiling heights. For high ceiling applications where fixture accessibility is not an issue, our high abuse fixtures present an economical, durable, and attractive lighting solution. In lower ceiling facilities where fixtures are accessible to detainees, our security detention fixtures provide appropriate illumi-nation without fear of tampering or breakage.
levels of secuRITY
High abuse lighting can be used effectively in high ceiling applications, while security-rated fixtures are necessary for low ceiling areas where lighting may be accessible to detainees. In both cases, kenall offers fixtures that do the job effectively, economically, and in the case of our high abuse millenium™ fixtures, attractively.
RecoMMenDeD lIgHTIng levels
with a variety of lamp and ballast options to choose from, meeting the IES recommendation for 30 foot-candles in recreation area applications won’t present a problem when you specify kenall – whether your appli-cation calls for high abuse or security-type luminaires.
InsTallaTIon anD MaInTenance
kenall's fixtures are easy to install and require little maintenance. both high abuse millenium and secu-rity-grade fixtures are designed for fast, trouble-free installation, with high quality housings, impact-resistant lenses and long-life lamps and ballasts that ensure minimal maintenance requirements – especially impor-tant considerations in high-ceiling applications where fixture inaccessibility can otherwise be a problem.
HousIng sTYles
Our ceiling-mounted security fixtures are available in clamshell and doorframe housing configurations. High abuse fixtures come in a variety of housing shapes and sizes.
PHoToMeTRIcs – TYPIcal RecReaTIon aRea
Recreation (RQCD Ceiling Squares Recessed 1 Lamp/320 Watt MH)
40’ x 60’ x 20’ Area 80/50/20 Room Reflectance, .72 LLF (Source: IESNA Handbook)Catalog No. RQCD-1/1-1-320M-MH-A/1-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Recreation 33 39 21 1.6:1 1.9:1
RecoMMenDeD RecReaTIon aRea fIxTuRes
SqDCCEILING mOUNT SURFaCE page 64
RmCDCEILING mOUNT RECESSED T8 LampS page 40
pRCT5CEILING mOUNT RECESSED T5, T5HO LampS page 41
mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™
Even though detention facility recreation areas are typically well supervised, lighting fixtures must be able to withstand the abuse typical of normal gym activities.
1�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
1618
2021
2121
2121
2121
2121
2018
16
1719
2223
2423
2323
2323
2423
2219
17
1821
2325
2525
2524
2525
2525
2321
18
1922
2426
2626
2626
2526
2626
2422
19
1922
2526
2727
2626
2627
2727
2522
19
2023
2527
2827
2726
2727
2827
2523
20
2023
2628
2828
2727
2728
2828
2623
20
2023
2628
2828
2727
2728
2828
2623
20
2023
2527
2827
2726
2727
2827
2523
20
2023
2527
2827
2726
2727
2827
2523
2019
2225
2627
2726
2626
2727
2725
2219
1922
2426
2626
2625
2626
2626
2422
1918
2123
2525
2525
2425
2525
2523
2118
1719
2223
2423
2323
2323
2423
2219
1716
1820
2121
2121
2121
2121
2120
1816
sallY PoRT
proper lighting is key to ensuring effective staff performance of important processing-area duties. being secured and supervised areas, sally ports are excellent applications for kenall’s high-performance, high abuse fixtures.
levels of secuRITY
Institutional high abuse fixtures are perfectly suited to secured and staffed areas such as sally ports and other detention facility processing areas.
RecoMMenDeD lIgHTIng levels
The IES recommendation for a minimum of five footcandles is easily surpassed with kenall’s wall or ceiling-mounted fixtures.
InsTallaTIon anD MaInTenance
kenall high abuse lighting is designed for fast installation, while routine maintenance couldn’t be easier. In the highly unlikely event of a fixture problem, our entire high abuse family of luminaires is covered by kenall’s exclusive peace of mind Lifetime Guarantee™.
HousIng sTYles
kenall’s institutional high abuse fixtures are wet Location listed and our architectural high abuse lighting fixtures are both wet Location listed and Ip64 rated.
aesTHeTIcs
by using only the best housing materials powder coated with high quality polyurethane, kenall fixtures keep their as-new appearance for years – even with minimum maintenance.
RecoMMenDeD sallY PoRT fIxTuRes
Kenall's institutional fixtures deliver the high lighting quality appropriate for secured processing areas.
PHoToMeTRIcs – TYPIcal sallY PoRT
Sally Port (N1048 Ceiling Surface 4 Lamps/F32T8)
30’ x 30’ x 15’ Area 80/50/20 Room Reflectance, .80 LLF (Source: IESNA Handbook)Catalog No. N1048-C-4-32-EB-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Sally Port 24 28 16 1.5:1 1.8:1
N1048CEILING mOUNT SURFaCE NOva™ page 76
SH848CEILING mOUNT SURFaCE SHERIFF™ page 78
mLHa1248CEILING mOUNT SURFaCEmILLENIUm STRETCH™
�0 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
buIlDIng MounTeD
Correctional facilities need to blend in with – and even complement – local architectural environments. That’s why kenall’s uniquely attractive and durable millenium™ fixtures are the perfect choice for exterior wall applications.
aesTHeTIcs
Correctional facilities are often located in urban areas that require aesthetic sensitivity. Exterior lighting fixtures must blend in with and complement the surrounding architectural design, while eliminating nuisance issues such as light trespass and glare. kenall offers a complete line of architecturally pleasing luminaires that are guaranteed against breakage for the lifetime of the installation.
levels of secuRITY
In order to work effectively night after night, building-mounted fixtures need to successfully resist physical abuse and harsh environmental conditions. kenall’s millenium™ high abuse fixtures are unsurpassed in their ability to withstand both.
RecoMMenDeD lIgHT levels
with their advanced optical systems, millenium fixtures can easily meet exterior illumination requirements – even in widely-spaced layouts – without creating the unattractive, uncomfortable glare all too common in high abuse fixtures.
InsTallaTIon anD MaInTenance
all kenall architectural high abuse fixtures are designed for easy installation. and when it comes to ease of maintenance, no other fixtures even come close. millenium’s UL Ip64 rating means dirt, bugs, moisture, and environmental debris can’t get in. millenium’s corrosion resistant construction – diecast marine-grade aluminum baseplates and stainless steel hardware – are the finest components you’ll find anywhere.
RecoMMenDeD buIlDIng MounTeD fIxTuRes
Millenium™ adds architectural style and flair to any building exterior, while being tough enough to take the worst abuse people and nature can dish out.
waLL mOUNT SURFaCE mILLENIUm HIGH abUSE™
waLL mOUNT SURFaCE mILLENIUm FREESCaLE™
FULL CUTOFF/waLL mOUNT SURFaCE mILLENIUm FINITE™
4 4
3 4
2
8 5
3 3
2
5 5
4 3
2
8 6
4 4
3
6 5
5 5
4
6 7
5 6
4
7 7
5 6
4
6 6
5 5
4
9 7
5 4
4
6 6
5 4
3
9 7
5 5
4
6 6
6 6
4
7 8
7 7
5
8 8
8 8
5
8 8
9 8
6
11
10
9 8
6
9 9
9 8
7
11
9 8
9 9
6
11
12
3 4
4 5
6 8
11
3 3
4 5
7 8
3 3
4 5
6
3 3
4 5
3 3
4 3
4 3
8 12
9
7 6
6 5
5 4
4 3
4 4
4 3
3 3
2 2
3
11
9 8
7 8
8 7
6 5
4 4
5 6
6 5
4 3
3 4
8 9
8 9
8 7
6 5
5 5
5 5
5 5
4 4
3 4
9 9
10
8 8
8 6
7 6
6 6
6 6
6 6
5 4
4
4 11
9
11
8 8
7 6
9 6
9 6
6 6
6 8
5 7
4
PHoToMeTRIcs – TYPIcal buIlDIng exTeRIoRBuilding Mounted (MR17WP Wall Surface 1 Lamp/150 Watt MH; MR17RP Ceiling Surface 1 Lamp/100 Watt MH; FS818RD Wall Surface 1 Lamp/50 Watt MH)
100’ x 100’ Area, .72 LLF (Source: IESNA Handbook)Catalog Nos. MR17WP-C-MW-150M-1, MR17RP-C-MW-100M-1,FS818RD-0-PIA-MW-50M-1
AVG MAX MIN AVG/ MAX/STAT AREA FC FC FC MIN MIN Building Exterior 5 9 2 2.1:1 3.9:1
�110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
sPecIfIcaTIon Pages – Table of conTenTs
Ceiling - surface mount Linear FluorescentSSa .................................23SSaT5 .............................24SDSa ..............................25SDSaT5 ..........................26SSb .................................27SSC ................................28SSD .................................29SCa ................................30SCb ................................31SCC ................................32SCD .............................. 33SDa .............................. 34SDD ............................... 35pSDT5 .............................36SCH .............................. 37SCT ............................... 38
Ceiling - recessed AdaptableLinear FluorescentRmCa .......................... 39RmCD ............................40pRCT5 .............................41
Ceiling - recessed FlangeLinear FluorescentRCa .............................. 42RCb .............................. 43RCC ...............................44RCD .............................. 45
Ceiling - recessed GridLinear FluorescentRGa ............................. 46RGD ............................. 47
Wall - surface mountLinear FluorescentwCU .............................. 48wCH ............................. 49wCbU ........................... 50wCb .............................. 51wCT ............................... 52wCD ............................. 53 wDU ............................. 54wDD .............................. 55wDS ............................. 56
Wall - recessed Concrete PourCompact FluorescentRFw .............................. 57
Corner mountLinear FluorescentCC ............................... 58CD ................................ 59
Ceiling squares - surfaceCompact Fluorescent & HIDSSqa ............................. 60SqCa ........................... 61SqDa ............................ 62SqDb ............................ 63SqDC ............................ 64SqDD ........................... 65
Ceiling squares - recessed FlangeCompact Fluorescent & HIDRqCa ........................... 66RqCb ............................ 67RqCD ........................... 68
Ceiling squares - Concrete PourCompact Fluorescent & HIDRqpa .............................69Rqpb ............................. 70
Complementary Product –Wall Platessurface & Concrete Pour (1,� and 3-Gang)wSp/wpp .......................71
exit signsmighty mac™ LeDmmEX ........................... 72millenium metrex™ LeDmETSw ......................... 73mETSU/mETDU .............74
Institutional High Abusenova™ & sheriff™N548 ...............................75N1048 .............................76SH524 & SH548 .............77SH824 & SH848 .............78SH1248 ...........................79
Alpha numeric IndexCC ............................... 58CD ................................ 59mETDU ...........................74mETSU ...........................74mETSw ..........................73mmEX ............................72N548 ...............................75N1048 .............................76pRCT5 .............................41pSDT5 .............................36RCa .............................. 42RCb .............................. 43RCC ...............................44RCD .............................. 45RFw .............................. 57RGa ............................. 46RGD ............................. 47RmCa .......................... 39RmCD ............................40RqCa ........................... 66RqCb ............................ 67RqCD ........................... 68Rqpa .............................69Rqpb ............................. 70SCa ................................30SCb ................................31SCC ................................32SCD .............................. 33SCH .............................. 37SCT ............................... 38SDa .............................. 34SDD ............................... 35SDSa ..............................25SDSaT5 ..........................26SH524 & SH548 .............77SH824 & SH848 .............78SH1248 ...........................79SqCa ........................... 61SqDa ............................ 62SqDb ............................ 63SqDC ............................ 64SqDD ........................... 65SSa .................................23SSaT5 .............................24SSb .................................27SSC ................................28SSD .................................29SSqa ............................. 60wCb .............................. 51wCbU ........................... 50wCD ............................. 53 wCH ............................. 49wCT ............................... 52wCU .............................. 48wDD .............................. 55wDS ............................. 56wDU ............................. 54wSp/wpp .......................71
secuRITY DeTenTIon aRea lIgHTIng: MIgHTY Mac™
�� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2.00" dia. Wiring hole (4) .62" embossed mounting holes
25.50"(648mm)
22.00"(559mm)
7.00"(178mm)
13.00"”(330mm)
3.50"(89mm)
13.00"(330mm)
49.50"(1257mm)
23.00"(584mm)
2.00" dia. Wiring hole (6) .62" embossed mounting holes
7.00"(178mm)
13.00"(330mm)
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
ssa seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HOSize: Nominal 12"x24" and 12"x48"
nominal size2 12" x 24"4 12" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two3 Three
* Not available as base material• Not available with F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder Sk Speaker Housing Extension TN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level ControlUv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z" brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SSa4-0/0-232-IS-1-120-1/b-1 = 67.2%. For additional photo-metric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
ssa
�310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
(6) .62" Embossed Mounting Holes
49.50"(1256mm)
46.00"(1168mm)
6.00"(182mm)
11.25"(286mm)
2.00" Dia. Wiring Hole
2.750" (70mm)
11.250" (286mm)
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: T5, T5HOSize: Nominal 12" x 48"
nominal size4 12" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)
Lamp Quantity 1 One2 Two3 Three (F28T5 only)
Lamp type - 4’ nominal Length28 F28T554 F54T5HO (2 Lamp max.)
*Not available as base material**SN Option
Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass F** .125" Clear polycarbonate (Outer Lens Only)
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & Holder TN Night Light - Lamp by others (Not available w/ 3 F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contra-band concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed internal piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum total thickness .500" - see ordering information.
Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: For photometric informa-tion, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
ssaT5
ssaT5 seRIes
�4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
12.25"311mm
3.50"89mm
14.56"370mm
36.00"914mm
49.43"1256mm
8.00"203mm
14.56"370mm
(4) .50" Dia.Mounting Holes
2.00" Dia. Wiring Hole(2) Mounting Keyholes
sDsa seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HOSize: Nominal 12"x24" and 12"x48"
nominal size2 12" x 24"4 12" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two3 Three
*Not available as Door material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1 Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing Extension TN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed RGT Removable Gear Tray IH2 Internal HingeIH4 Full Length Internal Hinge
• Not available with F54T5HO
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for 2' (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. U.S. Patent No. 7,325,939.
PHotometrICs: Efficiency of SDSa4-0/0-232-IS-1-120-1/b-1 = 56.3%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
sDsa
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2.00" Dia. Wiring Hole (4) .50" Mounting Holes
49.44"(1256mm)
46.00"(1168mm)
6.25"(156mm)
12.50"(318mm)(2) Mounting
Keyholes
2.62" (67mm)
12.50" (318mm)
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
CEILING mOUNT SURFaCE HINGED DOOR Lamps: T5, T5HO Size: Nominal 12" x 48"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Full length staked and welded internal piano type hinge (1/2" knuckle/1/8" diameter pin) standard.
Lens: as specified - maximum total thickness .500" - see ordering information.
Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable gear tray with quick disconnect.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. U.S. Patent No. 7,325,939.
PHotometrICs: For photometric informa-tion, go to www.kenall.com.
sDsaT5 seRIes
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
sDsaT5
nominal size4 12" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)a* 18 Gauge SS (brushed)b* 18 Gauge SS (painted)
Lamp Quantity 1 One2 Two3 Three
*Not available as Door material**SN Option
Lamp type - 4’ nominal Length28 F28T554 F54T5HO
Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF** .125" Clear polycarbonate (Outer Lens Only)
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & HolderkO 1/2" EmT knockouts TN Night Light - Lamp by others (Not available w/ 3 F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed
�6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
3.50"(102mm)
17.00"(432mm)
2.00" dia. Wiring hole (4) .62" embossed mounting holes
25.50"(648mm)
22.00"(559mm)
11.00"(279mm)
17.00"(432mm)
49.50"(1257mm)
23.00"(584mm)
11.00"(279mm)
17.00"(432mm)
2.00" dia. Wiring hole (6) .62" embossed mounting holes
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SSb4-0/0-332-IS-1-120-1/b-1 = 66.5%. For additional photo-metric information, go to www.kenall.com.
ssb seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 16"x24" and 16"x48"
nominal size2 16" x 24"4 16" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 2 Two3 Three 4 Four
* Not available as base material• Two lamp max. w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TT (3 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO (3 Lamp max.)
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
ssb
�710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
3.50"(89mm)
21.00"(533mm)
2.00" dia. Wiring hole (4) .62" embossed mounting holes
25.50"(648mm)
22.00"(559mm)
15.00"(381mm)
21.00"(533mm)
15.00"(381mm)
21.00"(533mm)
49.50"(1257mm)
23.00"(584mm)
2.00" dia. Wiring hole (6) .62" embossed mounting holes
ssc seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 20"x24" and 20"x48"
nominal size2 20" x 24"4 20" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
* Not available as base material• Two lamp max. w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SSC4-0/0-432-IS-1-120-1/9-1 = 68%. For additional photo-metric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outerssc
�8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
3.50"(89mm)
25.00"(635mm)
2.00" dia. Wiring hole (4) .62" embossed mounting holes
25.50"(648mm)
22.00"(559mm)
19.00"(483mm)
25.00"(635mm)
19.00"(483mm)
25.00"(635mm)
49.50"(1257mm)
23.00"(584mm)
2.00" dia. Wiring hole (6) .62" embossed mounting holes
ssD seRIes
ssD
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"
nominal size2 24" x 24"4 24" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
* Not available as base material• Three lamp max. w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SSD4-0/0-432-IS-1-120-1/b-1 = 70%. For additional photo-metric information, go to www.kenall.com.
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.00"(127mm)
12.00"(305mm)
2.00" dia. Wiring hole (4) .62" mounting holes
27.75"(705mm)
24.00"(609mm)
8.00"(203mm)
12.00"(305mm)
2.00" dia. Wiring hole
(6) .62" mounting holes
51.25"(1302mm)
22.00"(558mm)
8.00"(203mm)
12.00"(305mm)
scanominal size2 12" x 24"4 12" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two
*Not available as base material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
sca seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens RETENTION: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCa4-0/0-232-IS-1-120-1/b-1 = 59.2%. For additional photo-metric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
30 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.00"(127mm)
16.00"(406mm)
2.00" dia. Wiring hole (4) .62" mounting holes
27.75"(705mm)
24.00"(609mm)
12.00"(305mm)
16.00"(406mm)
2.00" Dia. Wiring Hole (6) .62" Mounting Holes
51.25"(1296.6mm)
22.00"(558mm)
12.00"(305mm)
16.00"(406mm)
scb seRIes
scb
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 16"x24" and 16"x48"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCb4-0/0-332-IS-1-120-1/b-1 = 63.5%. For additional photo-metric information, go to www.kenall.com.
nominal size2 16" x 24"4 16" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
*Not available as base material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
3110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.00"(127mm)
20.00"(508mm)
2.00" dia. Wiring hole (4) .62" mounting holes
27.75"(705mm)
24.00"(609mm)
16.00"(406mm)
20.00"(508mm)
2.00" Dia. Wiring Hole (6) .62" Mounting Holes
51.25"(1302mm)
22.00"(558mm)
16.00"(406mm)
20.00"(508mm)
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
scc seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 20"x24" and 20"x48"
scc
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCC4-0/0-332-IS-1-120-1/a-1 = 69.2%. For additional photo-metric information, go to www.kenall.com.
nominal size2 20" x 24"4 20" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
*Not available as base material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassN .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
3� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.00"(127mm)
24.00"(610mm)
2.00" dia. Wiring hole (4) .62" mounting holes
27.75"(705mm)
24.00"(609mm)
20.00"(508mm)
24.00"(610mm)
2.00" dia. Wiring hole (6) .62" mounting holes
51.25"(1302mm)
22.00"(558mm)
20.00"(508mm) 24.00"
(610mm)
scD seRIes
scD
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"
nominal size2 24" x 24"4 24" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
*Not available as base material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassN .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Full length continuous heavy gauge piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCD4-0/0-432-IS-1-120-1/b-1 = 65.6%. For additional photo-metric information, go to www.kenall.com.
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
3310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
12.37"314mm
3.50"89mm
22.00"
25.43"
7.50"12.00"
46.00"
49.43"
7.50"12.00"
(4) .50" Dia.Mounting Holes
2.00" Dia. Wiring Hole(2) Mounting Keyholes
2.00" Dia. Wiring Hole
(2) .50" Dia.Mounting Holes
(2) Mounting Keyholes
2.00" dia. Wiring hole
(2) .50" mounting holes
25.43"(646mm)
14.00"(356mm)
8.00"(203mm)
12.37"(314mm)
(2) mounting keyholes
2.00" dia. Wiring hole
(4) .50" mounting holes
49.43"(1255mm)
36.00"(914mm)
8.00"(203mm)
12.37"(314mm)(2) mounting
keyholes
sDa seRIes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
sDa
CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SDa4-0/0-232-IS-1-120-1/b-1 = 56.3%. For additional photo-metric information, go to www.kenall.com.
nominal size2 12" x 24"4 12" x 48"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two3 Three (F32T8, F54T5HO and F28T5 only)
*Not available as Door material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others (2 Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed RGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge
• Not available w/ F54T5HO
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
DIMensIonal DaTa
Cross section mounting Holes
34 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
23.00"584mm
3.50"89mm
18.50"
(2) Mounting Keyholes
2.00" Dia. Wiring Hole
(2) .50" Dia.Mounting Holes
22.00"
25.43"
23.00" 18.50"
(2) Mounting Keyholes2.00" Dia. Wiring Hole (4) .50" Dia.
Mounting Holes
46.00"
49.43"
23.00"
2.00" dia. Wiring hole
(2) .50" mounting holes
25.43"(646mm)
14.00"(356mm)
18.50"(470mm)
23.00"(584mm)
(2) mounting keyholes
2.00" dia. Wiring hole
(4) .50" mounting holes
49.43"(1255mm)
36.00"(914mm)
18.50"(470mm)
23.00"(584mm)
(2) mounting keyholes
sDD seRIes
sDD
CEILING mOUNT SURFaCE HINGED DOOR Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"
nominal size2 24" x 24"4 24" x 48"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three4 Four
*Not available as Door material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL packFS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/National Sanitation Foundation ListedwL wet Location Listed RGT Removable Gear Tray IH2 Internal HingeIH4 Full Length Internal Hinge
• Three lamp max. w/F54T5HO
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional Removable Gear Tray (RGT) with quick disconnect.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SDD4-0/0-432-IS-1-120-1/b-1 = 63.6%. For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
DIMensIonal DaTa
Cross section mounting Holes
3�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2.00" Dia. Wiring Hole (4) .50" Mounting Holes
(2) Mounting Keyholes
49.25"(1255mm)
46.00"(914mm)
17.00"(457mm)
22.00"(559mm)
2.62"(67mm)
22.00"(559mm)
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
CEILING mOUNT SURFaCE HINGED DOOR Lamps: T5, T5HO Size: Nominal 24" x 48"
nominal size4 24" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2** 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)a** 18 Gauge SS (brushed) b** 18 Gauge SS (painted)
Lamp Quantity2 Two3 Three4 Four5 Five6 Six
*SN Option**Not available in Door material
Lamp type - 4’ nominal Length28 F28T554 F54T5HO
Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF* .125" Clear polycarbonate (Outer Lens Only)
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & HolderkO 1/2" EmT knockouts (Ends) TN Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location Listed
PsDT5
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Full length staked and welded internal piano type hinge (1/2" knuckle/1/8" diameter pin) standard.
Lens: as specified - maximum total thickness .500" - see ordering information.
Lens retentIon: vertically adjustable “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Standard removable gear tray with quick disconnect.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: For photometric informa-tion, go to www.kenall.com.
PsDT5 seRIes
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
36 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.25"(133mm)
21.00"(533mm)
2.00" dia. Wiring hole (4) .62" embossed mounting holes
25.50"(648mm)
22.00"(559mm)
15.00"(381mm)
21.00"(533mm)
2.00" dia. Wiring hole (6) .62" embossed mounting holes
49.50"(1232mm)
23.00"(584mm)
15.00"(381mm)
21.00"(533mm)
scH seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal 20"x24" and 20"x48"
scH
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCH4-0/0-332-IS-1-120-1/b-1 = 60%. For additional photo-metric information, go to www.kenall.com.
nominal size2 20" x 24"4 20" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three
*Not available as base material
Lamp type - �’ nominal Length 17 F17T8 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
3710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.25"(133mm)
13.00"(330mm)
2.00" dia. Wiring hole (4) .62" mounting holes
26.50"(673mm)
10.50"(267mm)
7.00"(178mm)
13.00"(330mm)
2.00" dia. Wiring hole (6) .62" mounting holes
50.50"(1283mm)
22.50"(571mm)
7.00"(178mm)
13.00"(330mm)
scT seRIes
scT
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"
nominal size2 12" x 24"4 12" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three
* Not available as base material• Not available w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T8 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO (2 Lamp max.)
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others (2 Lamp max. with F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
DIMensIonal DaTa
Cross section mounting Holes
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to either side of baseplate via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of SCT4-0/0-232-IS-1-120-1/b-1 = 57.5%. For additional photo-metric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
38 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
11.750" (298mm)
4.875" (124mm)
.437" (11mm)
11.875"(302mm)
(2) 1/2" EMT K.O. Access Plate (On side) (6) .50" x .88" OBROUND
48.00”(1219mm)
20.50"(521mm)
20.50"(521mm)
4.360"(111mm)
RMca seRIes
RMca
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Full length completely concealed piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to door.
Lens: as specified - maximum thickness .500" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of RmCa4-2/2-232-IS-1-120-1/9-1 = 51%. For additional pho-tometric information, go to www.kenall.com.
nominal size2 12" x 24"4 12" x 48"
Ceiling type FL/TR Flange/Threaded RodFL/CC Flange/Cross ChannelFL/Y Flange/Yoke FL/Sa Flange/Swing-Out armsTG T-Grid mp metal panCZ Concealed Z-Spline
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)
*Not available as Hsg. material
Lamp Quantity 1 One2 Two3 Three
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1 Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified Ceiling TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location Listed
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
Recommended Ceiling Cutout: 48.250" x 10.437"
3�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
23.750" (603mm)
4.875"(124mm)
.437" (11mm)
16.00"(406mm)
(2) 1/2" EMT K.O. Access Plate (On side) (6) .50" x .88" OBROUND
48.00”(1219mm)
20.50"(521mm)
20.50"(521mm)
23.875"(606mm)
RMcD seRIes
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
RMcD
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Full length completely concealed piano type internal hinge (1/2" knuckle/1/8" di-ameter pin) standard. pin secured to knuckle. Hinge welded to door.
Lens: as specified - maximum thickness .500" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of RmCD4-2/2-432-IS-1-120-1/9-1 = 64.5%. For additional photometric information, go to www.kenall.com.
nominal size2 24" x 24"4 24" x 48"
Ceiling type FL/TR Flange/Threaded RodFL/CC Flange/Cross ChannelFL/Y Flange/Yoke FL/Sa Flange/Swing-Out armsTG T-Grid mp metal pan CZ Concealed Z-Spline
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)
*Not available as Hsg. material
Lamp Quantity2 Two3 Three 4 Four
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TT 55b F55TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified Ceiling TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location Listed
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
Recommended Ceiling Cutout: 48.250" x 22.437"
40 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
23.75"(603mm)
21.73"(552mm)
2.88"(73mm)
.58"(15mm)
.221
48.00"(1219mm)
23.88"(607mm)
(2) 1/2" EMT K.O. Access Plate (6) .50" x .88" OBROUND
18.00"(533mm)
20.50"(521mm)
20.50"(521mm)
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
PRcT5
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: T5, T5HO Size: Nominal 24" x 48"
nominal size4 24" x 48"
Ceiling typeFL/TR Flange/Threaded Rod FL/CC Flange/Cross Channel FL/Y Flange/Yoke FL/Sa Flange/Swing-Out arms TG T-Grid
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) b 18 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed) a* 18 Gauge SS (brushed)
*Not available as base material**SN Option
Lamp Quantity2 Two3 Three4 Four5 Five6 Six
Lamp type - 4’ nominal Length28 F28T554 F54T5HO
Ballast type RS Rapid Start Electronic <10% THD Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered GlassF** .125" Clear polycarbonate (Outer Lens Only)
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & Holder TN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location Listed
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Full length completely concealed in-ternal piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door.
Lens: as specified - maximum total thickness .500" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p.
LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: For photometric informa-tion, go to www.kenall.com.
PRcT5 seRIes
Recommended Ceiling Cutout: 48.25" x 22.50"
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
13.50"(341.5mm)
3.00"(76.2mm)
(2) 1/2" emt k.o. access plate
(4) 1.25" x .75" obround
21.00"(533mm)
9.00"(229mm)
12.00"(305mm)
25.00"(635mm)
(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround
9.00"(229mm)
12.00"(305mm)
49.00"(1245mm)
18.00"(457mm)
18.00"(457mm)
Rca seRIes
Rca
CEILING mOUNT RECESSEDHINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 12"x24" and 12"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.
PHotometrICs: Efficiency of RCa4-0/0-232-IS-1-120-1/b-1 = 57.2%. For additional photo-metric information, go to www.kenall.com.
nominal size2 12" x 24"4 12" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two3 Three
* Not available as Door material** Not available as Hsg. material• Not available w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TT (2 Lamp max.)Lamp type - 4’ nominal Length28 F28T532 F32T8 54 F54T5HO (2 Lamp max.)
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCC Cross Channel mounting kitpF plaster Frame mounting kit YF Yoke Frame mounting kitEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & HolderSk Speaker Housing ExtensionTN pL Night Light - Lamp by others (Two Lamp max. w/ F54T5HO) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter SN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
17.50"(442.7mm)
3.00"(76.2mm)
21.00"(533mm)
(2) 1/2" emt k.o. access plate (4) 1.25" x .75" obround
13.00"(330mm)
16.00"(406mm)
25.00"(635mm)
(2) 1/2" emt k.o. access plate
49.00"(1245mm)
(6) 1.25" x .75" obround
13.00"(330mm)
16.00"(406mm)
18.00"(457mm)
18.00"(457mm)
Rcb seRIes
Rcb
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 16"x24" and 16"x48"
nominal size2 16" x 24"4 16" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
* Not available as Door material** Not available as Hsg. material• Three lamp max. w/ F54T5HO
Lamp type - �’ nominal Length 17 F17T831U F31T8 (2 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.
PHotometrICs: Efficiency of RCb4-0/0-332-IS-1-120-1/b-1 = 57.8%. For additional photo-metric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
21.50"(543.9mm)
3.00"(76.2mm)
(2) 1/2" emt k.o. access plate
(4) 1.25" x .75" obround
21.00"(533mm)
17.00"(432mm)
20.00"(508mm)
25.00"(635mm)
(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround
17.00"(432mm)
20.00"(508mm)
49.00"(1245mm)
18.00"(457mm)
18.00"(457mm)
Rcc seRIes
Rcc
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 20"x24" and 20"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.
PHotometrICs: Efficiency of RCC4-0/0-332-IS-1-120-1/b-1 = 64.7%. For additional photo-metric information, go to www.kenall.com.
nominal size2 20" x 24"4 20" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
*Not available as Door material**Not available as Hsg. material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level ControlUv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
44 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
25.50"(645.1mm)
3.00"(76.2mm)
(2) 1/2" emt k.o. access plate
(4) 1.25" x .75" obround
21.00"(533mm)
21.00"(533mm)
24.00"(610mm)
25.00"(635mm)
(2) 1/2" emt k.o. access plate (6) 1.25" x .75" obround
49.00"(1245mm)
18.00"(457mm)
18.00"(457mm)
21.00"(533mm)
24.00"(610mm)
RcD seRIes
RcD
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8, T5, T5HO Size: Nominal 24"x24" and 24"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. InstALLAtIon: See Options for specific mounting hardware required. See security detention Recessed Installation Data Technical Sheet or consult factory with questions.
PHotometrICs: Efficiency of RCD4-0/0-432-IS-1-120-1/b-1 = 66.4%. For additional photometric information, go to www.kenall.com.
nominal size2 24" x 24"4 24" x 48"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity2 Two3 Three 4 Four
*Not available as Door material**Not available as Hsg. material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCC Cross Channel mounting kitpF plaster Frame mounting kitYF Yoke Frame mounting kitEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterSN Splash Non-Food Zone/ National Sanitation Foundation ListedwL wet Location ListedIH4 Full Length Internal Hinge
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
12.00"(303.6mm)
5.00"(126.5mm)
(2) 1/2" EMT K.O. Access Plate
24.00"(610mm)
11.75"(298mm)
(2) 1/2" EMT K.O. Access Plate
48.00"(1219mm)
11.75"(298mm)
Rga seRIes
Rga
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 12"x24" and 12"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length inter-nal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens RETENTION: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of RGa4-2/2-232-IS-1120-1/9-1 = 51%. For additional photomet-ric information, go to www.kenall.com.
nominal size2 12" x 24"4 12" x 48"
Door/Housing material0** 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3** 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)
Lamp Quantity 1 One2 Two3 Three
*Not available as Door material**Not available as Hsg. material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (1Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified CeilingTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
46 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
24.00"
5.00"(126.5mm)
(607.2mm)
(2) 1/2" EMT K.O. Access Plate
24.00"(610mm)
23.75"(603mm)
(2) 1/2" EMT K.O. Access Plate
48.00"(1219mm)
23.75"(603mm)
RgD seRIes
RgD
CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: biax, T8 Size: Nominal 24"x24" and 24"x48"
sPecIfIcaTIons
HousInG: Die-formed prime grade material as specified - see ordering information. TIG and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and mounts to housing via keyholes. See Options for full length internal hinge (IH4).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of RGD4-2/2-432-IS-1-120-1/9-1 = 64.5%. For additional photometric information, go to www.kenall.com.
nominal size2 24" x 24"4 24" x 48"
Door/Housing material0** 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3** 14 Gauge SS (painted) 4 16 Gauge SS (painted)b 18 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)
Lamp Quantity2 Two3 Three4 Four
*Not available as Door material**Not available as Hsg. material
Lamp type - �’ nominal Length 17 F17T831U F31T8 (3 Lamp max.) 40b F40TTLamp type - 4’ nominal Length32 F32T8
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL packFS Single Fuse & Holder SC Specified CeilingTN pL Night Light - Lamp by others DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location Listed
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
7.00"(178mm)
10.25"(260mm)
2.00" Dia. Wiring Hole (4) .62" Mounting Holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
52.75"(1340mm)
48.00"(1219mm) 24.00"
(609mm)
2.00" Dia. Wiring Hole (6) .62" Mounting Holes
10.25"(260mm)
5.00"(127mm)
5.00"(127mm)
10.25"(260mm)
2.00" Dia. Wiring Hole (4) .62" Mounting Holes
24.00" (610mm)
28.75" (730mm)
Wcu seRIes (Two aperture)
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (7"x11") x17", (7"x11") x29", (7"x11") x53"
Wcunominal size1 (7"x11") x 17" 2 (7"x11") x 29" 4 (7"x11") x 53"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Qty (uplight Component) 1 One2 TwoLamp Qty (Downlight Component)1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (3 Lamp max.) 26q 26 watt quad (3 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT (3 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCU4-0/0-332-IS-1-120-1/9-1 = 51.4%. For additional photometric information, go to www.kenall.com.
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
48 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
7.00"(178mm)
10.25"(260mm)
2.00" Dia. Wiring Hole (4) .62" Mounting Holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
52.75"(1340mm)
48.00"(1219mm) 24.00"
(609mm)
2.00" Dia. Wiring Hole (6) .62" Mounting Holes
10.25"(260mm)
5.00"(127mm)
5.00"(127mm)
10.25"(260mm)
2.00" Dia. Wiring Hole (4) .62" Mounting Holes
24.00" (610mm)
28.75" (730mm)
WcH seRIes(one aperture)
WcHnominal size1 (7"x11") x 17" 2 (7"x11") x 29" 4 (7"x11") x 53"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Qty 1 One2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (7"x11") x17", (7"x11") x29", (7"x11") x53"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCH4-0/0-232-IS-1-120-1/9-1 = 45.6%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
4�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
8.750"(222mm)
2.00" dia. Wiring hole (4) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
5.00"(127mm)
10.25"(260mm)
2.00" dia. Wiring hole (4) .62" mounting holes
24.00" (610mm)
28.75" (730mm)
52.75"(1340mm)
48.00"(1219mm)
2.00" dia. Wiring hole (6) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
24.00"(609mm)
10.25"(260mm)
8.750"(222mm)
2.00" dia. Wiring hole (4) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
5.00"(127mm)
10.25"(260mm)
2.00" dia. Wiring hole (4) .62" mounting holes
24.00" (610mm)
28.75" (730mm)
52.75"(1340mm)
48.00"(1219mm)
2.00" dia. Wiring hole (6) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
24.00"(609mm)
10.25"(260mm)
Wcbu bull nose series (Two aperture)
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8Size: Nominal (9"x11") x17", (9"x11") x29", (9"x11") x53"
Wcbunominal size1 (9"x11") x 17" 2 (9"x11") x 29" 4 (9"x11") x 53"
Housing/Base material0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6* 14 Gauge SS (brushed)
Lamp Qty (uplight Component) 1 One2 TwoLamp Qty (Downlight Component)1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (3 Lamp max.) 26q 26 watt quad (3 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT (3 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge
DIMensIonal DaTa
Cross section mounting Holes
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contra-band concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCbU4-0/0-332-IS-1-120-1/9-1 = 51.4%. For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�0 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
8.750"(222mm)
2.00" dia. Wiring hole (4) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
5.00"(127mm)
10.25"(260mm)
2.00" dia. Wiring hole (4) .62" mounting holes
24.00" (610mm)
28.75" (730mm)
52.75"(1340mm)
48.00"(1219mm)
2.00" dia. Wiring hole (6) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
24.00"(609mm)
10.25"(260mm)
8.750"(222mm)
2.00" dia. Wiring hole (4) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
12.00"(305mm)
16.75" (425mm)
5.00"(127mm)
10.25"(260mm)
2.00" dia. Wiring hole (4) .62" mounting holes
24.00" (610mm)
28.75" (730mm)
52.75"(1340mm)
48.00"(1219mm)
2.00" dia. Wiring hole (6) .62" mounting holes
10.25"(260mm)
5.00"(127mm)
24.00"(609mm)
10.25"(260mm)
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
nominal size1 (9"x11") x 17" 2 (9"x11") x 29" 4 (9"x11") x 53"
Housing/Base material0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6* 14 Gauge SS (brushed)
Lamp Qty (Downlight Component)1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control Switch TN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge
Wcb
Wcb bull nose series (one aperture)
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8Size: Nominal (9"x11") x17", (9"x11") x29", (9"x11") x53"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCb4-0/0-332-IS-1-120-1/9-1 = 67.2%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
8.37"
13.37"(339mm)
(212mm)
2.00" dia. Wiring hole (4) .62" mounting holes
13.37"(339mm)
7.00"(178mm)
12.00"(305mm)
16.75" (425mm)
7.00"(178mm)
13.37"(339mm)
2.00" dia. Wiring hole (4) .62" mounting holes
24.00" (610mm)
28.75" (730mm)
52.75"(1340mm)
48.00"(1219mm) 24.00"
(609mm)
2.00" dia. Wiring hole (6) .62" mounting holes
13.37"(339mm)
7.00"(178mm)
WcT seRIes (one aperture)
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8 Size: Nominal (9"x14") x17", (9"x14") x29", (9"x14") x53"
WcTnominal size1 (9"x14") x 17" 2 (9"x14") x 29" 4 (9"x14") x 53"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Qty1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsCO Convenience OutletEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder GFI Ground Fault Outlet Rp Recessed push Switch Sk Speaker Housing ExtensionTC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type 2' internal hinge (1/2" knuckle/1/8" diam-eter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to base-plate via keyholes. See Options for full length internal hinge (IH4 (standard on 1' housing)).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCT4-0/0-232-IS-1-120-1/b-1 = 47.2%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
16.87"(428mm)
6.25"(159mm)
2.00" dia. Wiring hole (4) .62" mounting holes
26.50"(673mm)
19.00"(482mm)
11.00"(279mm)
16.87"(428mm)
2.00" dia. Wiring hole (6) .62" mounting holes
50.50"(1283mm)
21.00"(533mm)
11.00"(279mm)
16.87"(428mm)
WcD series (Two aperture)
waLL mOUNT SURFaCE HINGED CLamSHELL Lamps: biax, T8 Size: Nominal (7"x17") x27", (7"x17") x51"
WcDnominal size 2 (7"x17") x 27" 4 (7"x17") x 51"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Qty 2 Two 3 Three
*Not available as base material
Lamp type - �’ nominal Length 17 F17T8 40b F40TT 55b F55TT Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear Tray
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed, spring loaded clevis style drop slot internal hinge spot welded to housing. mounts to baseplate via slots.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of wCD4-0/0-332-IS-1-120-1/7-1 = 53.2%. For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
9.25"(235mm)
8.37"(212mm)
5.25"(133mm)
(1) 1/2" emt k.o.'s
(4) .50" mounting holes
5.25"(133mm)
3.50"(89mm)
10.00"(254mm)
13.50" (343mm)
4.62"(117mm)
(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes
5.25"(133mm)
3.50"(89mm)
22.00"(559mm)
25.50" (648mm)
(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes
5.25"(133mm)
3.50"(89mm)
23.00"(584mm)
46.00" (1168mm)
(2) Mounting Keyholes
49.50" (1257mm)
WDu seRIes (Two aperture)
waLL mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8Size: Nominal (6"x10") x14", (6"x10") x26", (6"x10") x50"
WDunominal size1 (6"x10") x 14" 2 (6"x10") x 26" 4 (6"x10") x 50"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)
Lamp Qty 1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge
1
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
PHotometrICs: Efficiency of wDU4-0/0-232-IS-1-120-1/7-1 = 60.3%. For additional photometric information, go to www.kenall.com.
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�4 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
9.25"(235mm)
8.37"(212mm)
5.25"(133mm)
(1) 1/2" emt k.o.'s
(4) .50" mounting holes
5.25"(133mm)
3.50"(89mm)
10.00"(254mm)
13.50" (343mm)
4.62"(117mm)
(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes
5.25"(133mm)
3.50"(89mm)
22.00"(559mm)
25.50" (648mm)
(3) 1/2" EMT K.O.'S (4) .50" Mounting Holes
5.25"(133mm)
3.50"(89mm)
23.00"(584mm)
46.00" (1168mm)
(2) Mounting Keyholes
49.50" (1257mm)
WDD seRIes (one aperture)
waLL mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8 Size: Nominal (6"x10") x14", (6"x10") x26", (6"x10") x50"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
PHotometrICs: Efficiency of wDD4-0/0-232-IS-1-120-1/7-1 = 45.9%. For additional photometric information, go to www.kenall.com.
nominal size1 (6"x10") x 14" 2 (6"x10") x 26" 4 (6"x10") x 50"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted)2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)
Lamp Qty 1 One 2 Two
*Not available as base material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad 26q 26 watt quad Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge
WDD
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
1
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
9.25"(235mm)
11.00"(279mm)
(3) 1/2" EMT K.O.'S
(6) .50" Mounting Holes
8.75"(222mm)
3.50"(89mm)
22.00"(559mm)
25.50" (648mm)
11.00"(279mm)
(7) .50" Mounting Holes
46.00"(1168mm)
49.50" (1257mm)
(3) 1/2" EMT K.O.'S (2) Mounting Keyholes
8.75"(222mm)
3.50"(89mm)11.00"
(279mm)
nominal size 2 (10"x11") x 26" 4 (10"x11") x 50"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Qty 1 One 2 Two
Lamp type - �’ nominal Length 17 F17T8 40b F40TT (1 Lamp max.) Lamp type - 4’ nominal Length 32 F32T8
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8) Sb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder pS push Switch TC Touch Control SwitchTN pL Night Light (Lamp by others) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterRGT Removable Gear TrayIH2 Internal HingeIH4 Full Length Internal Hinge
WDs seRIes (one aperture)
waLL mOUNT bOOk SHELF HINGED DOOR Lamps: biax, T8 Size: Nominal (10"x11") x26", (10"x11") x51"
WDs
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for internal hinge (IH2) and full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations.
PHotometrICs: Efficiency of wDS4-0/0-232-IS-1-120-1/7-1 = 45.9%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
1
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�6 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
1.06"(27mm)
8.62"(219mm)
10.08"(256mm)
5.12"(130mm)
2.56"(65mm)
6.50"(165mm)
(2) .31" dia mtg. holes
(3) 1/2" emt holes
5.12"(130mm) 6.50"
(165mm)
6.50"(165mm)
3.50"(89mm)
RfW seRIes (step light)
waLL mOUNT RECESSED Lamps: CFL Size: Nominal 6"x9"
sPecIfIcaTIons
HousInG: Die-formed 14-gauge prime grade material. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed 14-gauge prime grade material as specified - see ordering in-formation. Corners continuously seam welded and smooth with no post grinding (TIG).
Lens: as specified - maximum thickness .375" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “L” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: One 9-watt twin tube compact fluo-rescent lamp (by others).
BALLAst: Type as specified - see ordering information. all ballasts UL listed class p. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL 1570 listed for damp location applications.
PHotometrICs: For photometric informa-tion, go to www.kenall.com.
RfWnominal sizea 6" x 9"
Housing/Door material0 14 Gauge CRS (painted)
Lamp Qty 1 One
Lamp type 7 7 watt Twin9 9 watt Twin13q 13 watt quad
Ballast type NpF Normal power Factor pFC power Factor Corrected RS Rapid Start Electronic <10% THD (13q only)
Ballast Qty 1 One
Voltage120 120 volts277 277 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
options FS Single Fuse & Holder
10
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
1
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
a
9.00"(229mm)
9.00"(229mm)
6.00"(152mm)
3.50"(89mm)
2.00" dia. Wiring k.o. (4) .62" mounting holes
12.00"(305mm)
8.00"(203mm)
6.00"(152mm)
26.00"(660mm)
20.00"(508mm)
3.50"(89mm)
2.00" dia. Wiring k.o. (4) .62" mounting holes
50.00"(1270mm)
6.00"(152mm)
21.937"(557mm)
3.50"(89mm)
2.00" dia. Wiring k.o. (6) .62" mounting holes
43.87"(1114mm)
cc seRIes
ccnominal size1 9" x 12" 2 9" x 24" 4 9" x 48"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
lamp qty 1 One 2 Two 3 Three
* Not available as base material• Not available with F54T5HO
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (2 Lamp max.) 26q 26 watt quad (2 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 28 F28T5 32 F32T854 F54T5HO
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder Sk Speaker Housing ExtensionTN pL Night Light (Lamp by others) (2 Lamp max.) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Continuous heavy gauge piano type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes. See Options for full length inter-nal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
InstALLAtIon: Fixture not suitable for Sur-face Conduit or Continuous Row mounting.
PHotometrICs: Efficiency of CC4-0/0-232-IS-1-120-1/b-1 = 49%. For additional photo-metric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
CORNER mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, biax, T8, T5, T5HO Size: Nominal 9"x12", 9"x24", 9"x48"
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
�8 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
8.00"(203mm)
8.00"(203mm)
2.00" dia. Wiring k.o. (4) .62" mounting holes
12.00" (305mm)
6.43"(163mm)
2.75"(70mm)
8.00"(203mm)
8.00"(203mm)
2.00" dia. Wiring k.o. (4) .62" mounting holes
12.00" (305mm)
6.43"(163mm)
2.75"(70mm)
8.00"(203mm)
8.00"(203mm)
49.37"(1254mm)
43.50"(1105mm)
6.43"(163mm)
2.00" dia. Wiring k.o. (6) .62" mounting holes
21.75"(552mm)
8.00"(203mm)
2.75"(70mm)
cD seRIes CORNER mOUNT SURFaCE HINGED DOOR Lamps: CFL, biax, T8, T5, T5HO Size: Nominal 8"x12", 8"x24", 8"x48"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified – see ordering information.
HInGe: Continuous heavy gauge piano type 2' internal hinge (1/2" knuckle/1/8" diameter pin) standard. pin secured to knuckle. Hinge welded to door and secured to housing. See Options for full length internal hinge (IH4) (standard on 1' housing).
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: quantity and type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of CD4-0/0-232-IS-1-120-1/b-1 = 49%. For additional photo-metric information, go to www.kenall.com.
cDnominal size1 8" x 12" 2 8" x 24" 4 8" x 48"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Qty 1 One 2 Two 3 Three
*Not available as Door material
Lamp type - 1’ nominal Length 13 13 watt Twin 13q 13 watt quad (2 Lamp max.) 26q 26 watt quad (2 Lamp max.) Lamp type - �’ nominal Length 17 F17T8 40b F40TT Lamp type - 4’ nominal Length 28 F28T532 F32T8 54 F54T5HO
Ballast type IS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Sb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL pack pEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder kO 1/2" EmT knockout Sk Speaker Housing ExtensionTN pL Night Light (Lamp by others) (Two Lamp max.) DLN LED Night Light w/Light Level Control Uv Ultraviolet Filter wL wet Location ListedRGT Removable Gear TrayIH4 Full Length Internal Hinge
• Not available with F54T5HO
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
��10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
4.00"(102mm)
13.00"(330mm)
2.00" dia. Wiring hole (4) .62" mounting holes
13.50"(343mm)
10.00"(254mm)
7.00"(178mm)
13.00"(330mm)
ssqa seRIes
ssq
CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL Size: Nominal 12"X12"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). pin secured to knuckle. Hinge welded to housing and mounts to either side of base-plate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others.
BALLAst: Type as specified - see ordering information. all ballasts UL listed class p. Optional removable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SSqa-0/0-213-mb-1-120-1/9-1 = 40.5%. For additional photometric information, go to www.kenall.com.
nominal sizea 12" x 12"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One2 Two3 Three (13 watt Twin only)
*Not available as base material
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad
Ballast type RS Rapid Start Electronic <10% THDSb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packpEL High Lumen EL pack SEL Specified EL pack FS Single Fuse & Holder TN pL Night Light (5,7,9 watt Only) DLN LED Night Light w/Light Level Control Uv Ultraviolet FilterwL wet Location ListedRGT Removable Gear Tray
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty Inner/outer
a
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
60 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
6.00"(146mm)
13.50"(343mm) 2.00" dia. Wiring hole
(4) .62" mounting holes
8.00"(203mm)
13.50"(343mm)
oRDeRIng InfoRMaTIonseries nominal Hsg./Base Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
sqca seRIes CEILING mOUNT SURFaCE HINGED CLamSHELL Lamps: CFL, HID, Incandescent Size: Nominal 13"x13"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Clamshell housing resistant to penetration and contra-band concealment.
BAsePLAte: prime grade material as speci-fied - see ordering information. Die-formed blade trap (1/4" minimum) prevents contraband concealment and access. Embossed standoffs prevent distortion.
HInGe: Completely concealed drop slot piano type internal hinge (1/2" knuckle/1/8" diameter pin). pin secured to knuckle. Hinge welded to housing and mounts to baseplate via keyholes.
Lens: as specified - maximum thickness .875" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SqCa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.
sqcnominal sizea 13" x 13"
Housing/Base material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6* 14 Gauge SS (brushed) 7* 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)
• Fluorescent Only* Not available as base material† Glass interior lens required
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH 150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID only See SpecificationsSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass N .750" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)
DIMensIonal DaTa
Cross section mounting Holes
a
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
6.50"(165mm)
12.50"(317mm)
2.00" dia. Wiring hole (4) .62" mounting holes
6.00" sQ.(152mm)
12.50" sQ.(317mm)
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
sqD
sqDa seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: CFL, HID, Incandescent Size: Nominal 12"x12"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SqDa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.
nominal sizea 12" x 12"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)
*Not available as Door material• Fluorescent Only† Glass interior lens required
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH 150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)IH4 Full Length Internal Hinge
DIMensIonal DaTa
Cross section mounting Holes
a
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
8.00"(203mm)
16.50"(419mm)
2.00" dia. Wiring hole (4) .62" mounting holes
9.00" sQ.(229mm)
16.50" sQ.(419mm)
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
sqDb seRIes
nominal sizeb 16" x 16"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three
* Not available as Door material• Fluorescent Only† Glass interior lens required
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 50m† 50 watt mH 70S† 70 watt HpS70m† 70 watt mH100S† 100 watt HpS 100m† 100 watt mH 150S† 150 watt HpS 175m† 175 watt mH 150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedRGT Removable Gear Tray (Fluorescent only)IH4 Full Length Internal Hinge
CEILING mOUNT SURFaCE HINGED DOOR Lamps: CFL, HID, Incandescent Size: Nominal 16"x16"
bsqD
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. medium base socket for incandescent and HID applications.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SqDb-1/1-175m-1-120-a/1-1 = 53.8%. For additional photometric information, go to www.kenall.com.
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
10.00"(254mm)
20.50"(521mm)
2.00" dia. Wiring hole (4) .62" mounting holes
13.00" sQ.(330mm) 20.50" sQ.
(521mm)
sqDc seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: HID, Induction Size: Nominal 20"x20"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.
BALLAst: UL listed HpF type 150 watt induction fluorescent system (150IND) UL listed and approved for use with Icetron™ lamp/ballast by Osram Sylvania. See options for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SqDC-1/1-250m-1-120-a/1-1 = 53.4%. For additional photometric information, go to www.kenall.com.
sqDnominal sizeC 20" x 20"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2** 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Quantity 1 One
**Not available as Door material† Glass interior lens required* product UL listed and approved for use with Icetron™ lamp/ballast by Osram Sylvania.
Lamp type 100S† 100 watt HpS 150S† 150 watt HpS 175m† 175 watt mH 250S† 250 watt HpS 250m† 250 watt mH 150IND* 150 watt Induction Fluorescent
Ballast type See SpecificationsSb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only) qT 120/208/240/277 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedIH4 Full Length Internal Hinge
c 1 na 1
DIMensIonal DaTa
Cross section mounting Holes
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
64 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
12.00"(305mm)
24.50"(622mm) 2.00" dia. Wiring hole
(4) .62" mounting holes
17.00" sQ.(432mm) 24.50" sQ.
(622mm)
sqDD seRIes CEILING mOUNT SURFaCE HINGED DOOR Lamps: HID Size: Nominal 24"x24"
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade ma-terial as specified - see ordering information.
HInGe: Staked and welded external piano type hinge (1/2" knuckle/1/8" diameter pin) standard. See Options for full length (IH4) internal hinge.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.
BALLAst: UL listed HpF type. See options for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions.
PHotometrICs: Efficiency of SqDD-1/1-400m-DT-a/1-1 = 56.9%. For additional photo-metric information, go to www.kenall.com.
sqD Dnominal sizeD 24" x 24"
Housing/Door material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)
Lamp Quantity 1 One
* Not available as Door material† Glass interior lens required
Lamp type 150S† 150 watt HpS 175m† 175 watt mH 250S † 250 watt HpS 250m† 250 watt mH400S† 400 watt HpS 400m† 400 watt mH
Ballast type See SpecificationsSb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts qT 120/208/240/277 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location ListedIH4 Full Length Internal Hinge
oRDeRIng InfoRMaTIonseries nominal Hsg./Door Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
na 11
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
13.50"(343mm)
5.00"(127mm)
(3) 1/2" emt k.o.'s (4) 1.25" x .75 obrounds
8.00"(203mm)
12.00"(305mm)
Rqca seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, HID, Incandescent Size: Nominal 12"x12"
sPecIfIcaTIons
HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to housing via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. all lamps supplied by others. medium base socket on incandescent and HID lamps.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. Optional re-movable reflector/lamp/ballast tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Installation Technical Data Sheet.
PHotometrICs: Efficiency of RqCa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.
Rqcnominal sizea 12" x 12"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed)9** 12 Gauge CRS (painted)
Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three (13 watt Twin only)
*Not available as Door material** Not available with Hsg. material† Glass interior lens required• Fluorescent Only
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 70S† 70 watt HpS70m† 70 watt mH150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only TN pL Night Light (5,7,9,13 watt max.)DLN LED Night Light w/Light Level Control wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kitRGT Removable Gear Tray (Fluorescent Only)
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty †Inner/outer
DIMensIonal DaTa
Cross section mounting Holes
a
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
66 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
16.50"(419mm)
7.50"(190mm)
(2) 1/2" emt k.o.'s (4) .62" dia. mounting holes
9.00" sQ.(229mm)
15.75" sQ.(400mm)
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
sPecIfIcaTIons
HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. medium base socket on incandescent and HID lamps.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. all HID ballasts UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Technical Data Sheet. PHotometrICs: Efficiency of RqCb-1/1-175m-1-120-a/4-1 = 47.9%. For additional photometric information, go to www.kenall.com.
Rqcb seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, HID, Incandescent Size: Nominal 16"x16"
nominal sizeb 16" x 16"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed) 9** 12 Gauge CRS (painted)
Lamp Quantity 1 One (INC, 2D, & HID only)2 Two3 Three
*Not available as Door material** Not available as Hsg. material† Glass interior lens required• Fluorescent Only
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 50S† 50 watt HpS 50m† 50 watt mH 70S† 70 watt HpS70m† 70 watt mH100S† 100 watt HpS 100m† 100 watt mH 150S† 150 watt HpS 150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDBallast type - HID onlySee SpecificationsSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts (HID only)
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kit
Rqc b
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
(610mm)24.00"
12.25"(311mm)
(2) 1/2" EMT K.O.'S (4) .62" Dia. Mounting Holes
17.00" SQ.(432mm)
23.25" SQ.(590mm)
RqcD seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: HID Size: Nominal 24"x24"
sPecIfIcaTIons
HousInG: Die-formed prime grade mate-rial as specified - see ordering information. Lapped and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers. mogul base socket.
BALLAst: HID ballast UL listed HpF type. See options listing for alternates. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated. See security detention Recessed Installation Technical Data Sheet. PHotometrICs: Efficiency of RqCD-1/1-400m-DT-a/1-1 = 54.5%. For additional photo-metric information, go to www.kenall.com.
Rqc Dnominal sizeD 24" x 24"
Door/Housing Material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 2* 18 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6** 14 Gauge SS (brushed) 7** 16 Gauge SS (brushed) 9** 12 Gauge CRS (painted)
Lamp Quantity 1 One
*Not available as Door material** Not available with Hsg. material† Glass interior lens required
Lamp type 150S† 150 watt HpS 175m† 175 watt mH 250S† 250 watt HpS 250m† 250 watt mH320m† 320 watt mH400S† 400 watt HpS 400m† 400 watt mH
Ballast type See SpecificationsSb Specified ballast
Ballast Qty 1 One
Voltage120 120 volts277 277 volts347 347 volts DT 120/277 volts qT 120/208/240/277 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsFS Single Fuse & Holder qR Hot restrike system for maximum 100-watt DC bayonet quartz Lamp qS quartz Socket Only wL wet Location Listed pF plaster Frame CC Cross Channels YF Yoke Frame mounting kit
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
na 11
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
68 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
16.00"(406mm)
5.00"(127mm)
13.50"(343mm)
(3) 1/2" emt k.o.'s
16.00"(406mm)
12.00"(305mm)
RqPa seRIes CEILING mOUNT RECESSED HINGED DOORFRamE Lamps: CFL, Incandescent Size: Nominal 12"X12"
sPecIfIcaTIons
HousInG: Die-formed 16 gauge galvanized prime grade material. Lapped and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
HInGe: Completely concealed spring loaded drop slot piano type internal hinge (1/2" knuck-le/1/8" diameter pin). pin secured to knuckle. Hinge welded to door and mounts to either side of housing via keyholes.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “Z” brackets - prime grade material. Secured to door via thru-studs.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of Rqpa-0/0-113-mb-1-120-1/G-1 = 55.6%. For additional photometric information, go to www.kenall.com.
RqP anominal sizea 12" x 12"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed)9 12 Gauge CRS (painted)
Lamp Quantity 1 One (INC & 2D only)2 Two3 Three (13 watt Twin only)
† Glass interior lens required• Fluorescent Only
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad 28D 28 watt 2D 38D 38 watt 2D 150I† 150 watt Incandescent
Ballast type RS Rapid Start Electronic <10% THDSb Specified ballast
Ballast Qty 1 One 2 Two
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder TN pL Night Light (5,7,9 watt Only)DLN LED Night Light w/Light Level Control wL wet Location ListedRGT Removable Gear Tray (Fluorescent Only)
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty † Inner/outer
na
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
6�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
5.00"(127mm)
16.25"(413mm)
19.25"(489mm)
15.00"(381mm)
MOUNTING FLANGE
HOUSING
16.12"(409mm)
OUTER FLANGE
RqPb seRIes CEILING mOUNT RECESSED SECURED DOORFRamE Lamps: CFL, Incandescent Size: Nominal 16"x16"
sPecIfIcaTIons
HousInG: Die-formed 16 gauge galvanized prime grade material. Lapped and spot welded construction.
Door: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG). Door secured to housing with stainless steel aircraft cables.
Lens: as specified - maximum thickness .625" - see ordering information.
Lens retentIon: vertically adjustable con-tinuous “L” brackets - prime grade material. Secured to door via screws.
FAsteners: Hardened security screws as specified - see ordering information. Fully recessed.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LAmPs: quantity and type as specified - see ordering information. Lamps supplied by oth-ers.
BALLAst: Type as specified - see ordering information. all fluorescent ballasts UL listed class p. Optional removable reflector/lamp/bal-last tray with quick disconnect. LumInous seAL: polyurethane foam pre-vents light leaks from luminaire base.
LIstInGs: UL listed for damp locations. See ordering information for wet location applica-tions. Non IC rated.
PHotometrICs: Efficiency of Rqpb-1/1-213-mb-1-120-1/9-1 = 53.1%. For additional photometric information, go to www.kenall.com.
RqP bnominal sizeb 16" x 16"
Door/Housing material0 14 Gauge CRS (painted) 1 16 Gauge CRS (painted) 3 14 Gauge SS (painted) 4 16 Gauge SS (painted) 6 14 Gauge SS (brushed) 7 16 Gauge SS (brushed) 9 12 Gauge CRS (painted)
Lamp Quantity 1 One (INC & 2D only)2 Two3 Three (13 watt Twin only)
† Glass interior lens required• Fluorescent Only
Lamp type 13 13 watt Twin 13E 13 watt (4) pin Twin 13q 13 watt quad 26q 26 watt quad28D 28 watt 2D 38D 38 watt 2D 150I† 150 watt Incandescent
Ballast type - Fluorescent only RS Rapid Start Electronic <10% THDSb Specified ballast
Ballast Qty 1 One 2 Two (Fluorescent only)
Voltage120 120 volts277 277 volts347 347 volts
Lens (Inner/outer)0 No Lens 1 .125" prismatic acrylic 2 .125" prismatic polycarbonate 3 .125" Textured polycarbonate G .125" Clear polycarbonate 4 .156" prismatic polycarbonate R .156" prismatic Tempered Glass 6 .187" prismatic polycarbonate 7 .187" Clear polycarbonate 8 .187" Clear Tempered Glass 9 .250" Clear polycarbonate a .250" Clear Tempered Glass b .375" Clear polycarbonate C .375" Clear Tempered Glass J .500" Clear polycarbonate p .500" Clear Tempered Glass Dp Drop Dish polycarbonate
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL• Standard Lumen EL packpEL• High Lumen EL pack SEL• Specified EL pack FS Single Fuse & Holder wL wet Location ListedRGT Removable Gear Tray (Fluorescent Only)
oRDeRIng InfoRMaTIonseries nominal Door/Hsg. Lamp Lamp Ballast Ballast Voltage Lens Fasteners options size material Qty type type Qty †Inner/outer
na
DIMensIonal DaTa
Cross section mounting Holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
70 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
DuplexReceptacle
5.50"(139mm)
3.74"(95mm)
5.54"(141mm)
7.34"(186mm)
.5"(13mm)
GFI DuplexReceptacle
Switch
TV/TelephoneOutlet
Touch Control(Remote Device)
Blank
Single Gang Double Gang Triple Gang
Wall Plate
ElectricalDevice
Backplate
J-Box
Wall Plate
ElectricalDevice
Backplate
J-Box
WsP/WPP seRIes waLL pLaTES SURFaCE aND CONCRETE pOUR
sPecIfIcaTIons
CoVer PLAte: One-piece heavy gauge prime grade material as specified - see ordering information. Die formed with four countersunk holes for security fasteners.
BACkPLAte: prime grade 11-gauge galva-nized steel.
FAsteners: Flat head pOSIGRIp™ hardened security screws. See Ordering Information for additional options.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See ordering information for additional finish options.
LIstInGs: UL listed.
Electrical devices and junction boxes supplies by others. Consult factory for larger size/”Gang plates”.
oRDeRIng InfoRMaTIonseries material Gang size Devices Fasteners options Accessories
wSp wall Surface mount plate wpp wall pour-in-place plate
material a 10 Gauge CRS (painted) 0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6 14 Gauge SS (brushed)
Gang size 1 Single Gang (1 Device max.) 2 Double Gang (2 Devices max.) 3 Triple Gang (3 Devices max.)
Devices b blank D Duplex ReceptacleG GFCI Duplex ReceptacleN Single Round Receptacle S Switch T Tv/Telephone Outlet (specify hole size)TC Touch Control (Consult Factory)
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsIvY Ivory Color
AccessoriesD-0418 pOSIGRIp™ ScrewdriverD-0377 allen Head Screwdriver
DIMensIonal DaTa Devices
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
7110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
2.78"(70mm)
3.07"(78mm)
8.44"(214mm)
7.00"(178mm)
14.53"(369mm)
4.00"(102mm)
4.00"(102mm)
11.96"(304mm)
11.96"(304mm) 11.40"
(290mm)5.44"(138mm)
4.00"(102mm)
5.44"(138mm)5.44"
(138mm)
5.44"(138mm)
(4) 1/2" EMT KOs (4) .31" Dia. KOs
Top Mount Back Mount End Mount
Top Mount End Mount
(4) .31" Dia. KOs
7.00"(178mm)
14.53"(369mm)
8.44"(214mm)
7.00"(178mm)
11.40"(290mm)
4.00"(102mm)
5.44"(138mm)
8.44"(214mm)
7.00"(178mm)
11.40"(290mm)
8.44"(214mm)
7.00"(178mm)
14.53"(369mm)
4.00"(102mm)
5.44"(138mm)
(3) 1/2" EMT KOs (4) .31" Dia. KOs
MMex seRIes
MMexFace1 Single Face 2 Double Face
material 0 14 Gauge CRS (painted) 3 14 Gauge SS (painted) 6 14 Gauge SS (brushed)
Letter ColorG Green R Red
Voltage120 120 volts277 277 volts
Fasteners 1 Torx® Head w/ Center pin 2 allen Head w/ Center pin
optionsEL Standard Lumen EL packCEL Cold weather EL pack XaC auxiliary aC Supply (specify X120 or X277 volt) XDC auxiliary DC Supply (specify X6, X12 or X24 volt) bLk black Exterior
AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
HousInG: One-piece die-formed prime grade material as specified - see ordering informa-tion. Corners continuously seam welded and smooth with no post grinding (TIG).
Door: One-piece die-formed prime grade 14-gauge CRS. Corners continuously seam welded and smooth with no post grinding (TIG).
LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. Internal panels with stencil cut letters and red or green filter panel. Exter-nal panel .188 inch thick clear polycarbonate. Universal arrows.
FAsteners: Hardened security screws as specified - see ordering information.
FInIsH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for black exterior.
eLeCtrICAL: meets all UL requirements for Green and Red LED technology in regards to nanometer wavelength, maX/mIN ratios and footlamberts in both aC and DC modes.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry, remote laser activated test switch, protected mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency bat-tery pack (CEL) suitable for -49ºF to 113ºF.
LIstInGs: UL listed for wet Location.
DIMensIonal DaTa Cross section mounting Details single Face
oRDeRIng InfoRMaTIonseries Face material Letter Color Voltage Fasteners options
waLL/CEILING mOUNT INDIRECT LED SINGLE aND DOUbLE FaCE
Double Face
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Mighty Mac®
7� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
3.27"(83mm)
4.00"(102mm)
8.80"(224mm)
7.00"(178mm)
14.00"(356mm)
(4) .31" Mounting Holes .875" Dia. Hole
waLL mOUNT INDIRECT LED SINGLE FaCE
sPecIfIcaTIons
sHIeLD: U.v. stabilized, high impact, injection molded clear polycarbonate. Nominal thick-ness .125". Captive stainless steel pOSIG-RIp™ fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.
HousInG: High impact, injection molded polycarbonate. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to mount-ing surface.
LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. polycarbonate red or green filter panels. High impact, injection molded polycarbonate stencil and field selectable chevron inserts.
eLeCtrICAL: Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional surface conduit entry.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry, remote laser activated test switch, protected
mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion; 60 minutes with CSa option. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency battery pack (CEL) suitable for -49ºF to 113ºF.
LIstInGs/CertIFICAtIons: UL and CUL listed for wet Locations. UL Classified Ip64. meets or exceeds UL924 and NFpa 101 standards. Optional CSa Certified and labeled. meets or exceeds CSa C22.2 No. 141, C860-01 and NRCaN/C860-01 requirements.
InstALLAtIon: Standard four-point mounting required for peace of mind Lifetime Guarantee™.
MeTsWFinishmb matte black Exteriormw matte white Exterior
Legend Color R RedG Green
VoltageDT 120/277 voltsDTC* 120/347 volts
* available only with CSa Option.
optionsEL Standard Lumen EL pack CEL Cold weather EL packXaC auxiliary aC Supply (matches voltage selection)XDC auxiliary DC Supply (6/12/24 volts)CSa Certified and Labeled to Comply with Canadian Standards
AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver
DIMensIonal DaTa Cross section Baseplate mounting View
oRDeRIng InfoRMaTIonseries Finish Legend Color Voltage options Accessories
MeTsW seRIes pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Millenium Metrex™
7310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
4.04"(103mm)
4.00"(102mm)
9.55"(243mm)
7.00"(178mm)
14.00"(356mm)
(4) .31" Mounting Holes 2.00" Dia. Hole
8.80"(224mm)
5.80"(147 mm)
4.00"(102mm)
7.00"(178mm)
(4) .31" Mounting Holes2.00" Dia. Hole
8.80"(224mm)
5.80"(147 mm)
14.75"(375mm)
8.80"(224mm)
4.04"(103mm)
3.27"(83mm)
4.00"(102mm)
9.55"(243mm)
7.00"(178mm)
14.00"(356mm)
(4) .31" Mounting Holes 2.00" Dia. Hole
8.80"(224mm)
5.80"(147 mm)
3.27"(83mm)
4.00"(102mm)
7.00"(178mm)
(4) .31" Mounting Holes2.00" Dia. Hole
8.80"(224mm)
5.80"(147 mm)
14.75"(375mm)
8.80"(224mm)
MeTsu anD MeTDu seRIes waLL/CEILING mOUNT INDIRECT LEDSINGLE aND DOUbLE FaCE
sPecIfIcaTIons
sHIeLD: U.v. stabilized, high impact, injection molded clear polycarbonate. Nominal thick-ness .125". Captive stainless steel pOSIG-RIp™ fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.
HousInG: High impact, injection molded polycarbonate. Housing provided with canopy mounting and wireway drill points top and side – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to canopy.
CAnoPy: High impact, injection molded polycarbonate canopy cover with heavy gauge galvanized steel mounting plate with integral 1/4-20 threaded studs. Canopy mounting plate provided with four-point mounting holes, one
wireway hole and temporary junction box mounting holes. Closed cell die-cut Neoprene gasket seals canopy to mounting surface.
LeGenD: Legend illuminated by internal high output LEDs. Lettering six inches high with .750 inch stroke. polycarbonate red or green filter panels. High impact, injection molded polycarbonate stencil and field selectable chevron inserts.
eLeCtrICAL: Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Drill points provided for optional conduit entry.Options: Sealed nickel-cadmium Emergency battery pack (EL) with standard battery condi-tioning, self test and self diagnostic circuitry,
remote laser activated test switch, protected mechanical test switch and status indicator. provides 120 minutes of emergency opera-tion; 60 minutes with CSa option. Emergency battery pack (EL) suitable for 50ºF to 113ºF. Cold weather Emergency battery pack (CEL) suitable for -49ºF to 113ºF.
LIstInGs/CertIFICAtIons: UL and CUL listed for wet Locations. UL Classified Ip64. meets or exceeds UL924 and NFpa 101 standards. Optional CSa Certified and labeled. meets or exceeds CSa C22.2 No. 141, C860-01 and NRCaN/C860-01 requirements.
InstALLAtIon: Standard four-point mounting required for peace of mind Lifetime Guarantee™.
DIMensIonal DaTa Cross section Ceiling Canopy mounting View Ceiling mount
mETSU Single Face mETDU Double Face
end Canopy mounting View
End mount
mETSU Single Face mETDU Double Face
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
Millenium Metrex™
mETSU Single FacemETDU Double Face
Finishmb matte black Exteriormw matte white Exterior
Legend Color R RedG Green
VoltageDT 120/277 voltsDTC* 120/347 volts
* available only with CSa Option.
optionsEL Standard Lumen EL pack CEL Cold weather EL packXaC auxiliary aC Supply (matches voltage selection)XDC auxiliary DC Supply (6/12/24 volts)CSa Certified and Labeled to Comply with Canadian Standards
AccessoriesLp Laser pointer9500 pOSIGRIp™ Screwdriver
oRDeRIng InfoRMaTIonseries Finish Legend Color Voltage options Accessories
74 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
49.38”(1254mm)
4.75”(121mm)
13.97”(355mm)
(8) .41" Dia. Mounting Holes6.75”
(171mm)6.75”
(171mm)
13.5”(343mm)
13.97”(355mm)
2" Dia. 2.25”(57mm)
49.44”(1256mm)
41.44”(1053mm)
2.25”(57mm)4.8”
(122mm)
3.38”(86mm)
3.38”(86mm)
(2) 1/2" EMTKOs 24.72”
(628mm)
(6) .38" Holes
(4) 1/4-20 Weld Nuts
3”(76mm)
21.72”(552mm)
21.72”(552mm)
2”(51mm)
2”(51mm)
.5”(13mm)
4.50"(114mm)
4.75"(121mm)
Lens Tw ist-out and Wireway 1/2" EMT KO
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
nova I™n548 series (7100) CEILING/waLL mOUNT/SURFaCE
Lamps: biax, T8, T5Size: Nominal 5"x48"
width Length Depth5" 49.5" 4.5"
Lens typeC Clear prismatic
Lamp Qty1 One Lamp2 Two Lamps
Lamp type28 F28T5 (One lamp only)32 F32T840b F40TT
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5) Cw Cold weatherSb Specified ballast
Ballast Qty1 OneT Tandem wiring
Voltage120 120 volts277 277 volts347 347 voltsDv 120/277 volts (<10% THD), electronic ballasts only
optionsCO Convenience Outlet - Non GFI Receptacle (wall mount) 120 volts onlyEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderIR Internal Reflector (wall mount)pS push Switch (wall mount)TN 5 watt Twin Tube NpF Night Light
AccessoriesCm Corner mount adapter – Damp Locations onlyCmw Corner mount adapter – wet Location Covered Ceiling onlySa Surface adapter – wet Location Covered Ceiling only9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
Lens/HousInG: One-piece wraparound lens/housing with ten alignment security tabs for baseplate engagement (U.v. stabilized, high impact, virgin injection molded polycarbonate). Clear prismatic refractor. Nominal thickness .125".
BAsePLAte: 16-gauge CRS. baseplate provided with eight-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
GAsket: Die-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HArDWAre: Six stainless steel pOSIGRIp™ fasteners secure lens/housing to baseplate.
LIstInGs/CertIFICAtIons: UL and CUL list-ed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only. U.S. patent Nos. 246330; 4025780.
InstALLAtIon: Eight-point mounting required for peace of mind Lifetime Guaran-tee™. “Twist-out” sections, with gaskets, per-mit 1/2" conduit access on each end without special adapter.
PHotometrICs: For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries Lens Lamp Lamp Ballast Ballast Voltage options Accessories type Qty type type Qty
DIMensIonal DaTa Cross section Baseplate Convenience outlet (Co) Internal reflector (Ir)
Corner mounting Adapter (Cm)
n548 c
7�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
9.25”(235mm)
3.25”(83mm)
(4) .38” dia.mounting holes
20”508mm
20”(508mm)
9.25”(235mm)
50.75”(1289mm)
(2) mounting keyholes
2" dia. Wireway hole
7”(178mm)
9.75”(248mm)
6.9”(175mm)
(2) 1/2" emtkos
2”(51mm)
6.9”(175mm)
50.75”(1289mm)
11.68”(297mm)
7”(178mm)
20”(508mm)
(10) .38" holes (6) 1/4-20 Weld nuts
25.38”(645mm)
24.38”(619mm)
24.38”(619mm)
4”(102mm)
11.68”(297mm)
12.68”(322mm)
12.68”(322mm) 1”
(25mm)1”
(25mm)
.5”(13mm)
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
nova II™n1048 seRIes (7200) CEILING mOUNT/SURFaCE
Lamps: biax, T8, T5Size: Nominal 10"x48"
width Length Depth9.25" 51" 3.25"
Lens typeC Clear prismaticp pearlescent
Lamp Qty2 Two Lamps3 Three Lamps (T8 only)4 Four Lamps
Lamp type28 F28T5 (Two lamps only)32 F32T840b F40TT
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5) Cw Cold weatherSb Specified ballast
Ballast Qty1 One2 TwoT Tandem wiring
Voltage120 120 volts277 277 volts347 347 voltsDv 120/277 volts (<10% THD), electronic ballasts only
optionsEL T-8 One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HoldermS6 Six maximum Security Flange Retainer ClipsTN 5 watt Twin Tube NpF Night Light
AccessoriesCm Corner mount adapter (682) Damp Locations onlySa Surface adapter (7200a)9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
Lens/HousInG: One-piece wraparound lens/housing with ten alignment security tabs for baseplate engagement (U.v. stabilized, high impact, virgin injection molded polycarbonate). High efficiency Clear prismatic or pearlescent refractor. Nominal thickness .125".
BAsePLAte: 16-gauge CRS. baseplate provided with six-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
GAsket: Die-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HArDWAre: Two stainless steel pOSIGRIp™ fasteners secure lens/housing to baseplate.
LIstInGs/CertIFICAtIons: UL and CUL listed for wet Location – covered ceilings only.
InstALLAtIon: Six-point mounting required for peace of mind Lifetime Guarantee™. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without special adapter.
PHotometrICs: For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries Lens Lamp Lamp Ballast Ballast Voltage options Accessories type Qty type type Qty
DIMensIonal DaTa Cross section Baseplate
Corner mounting Adapter (Cm)
n1048
76 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
3.75"(95mm)
5.14"(130mm)
32.00"(813mm)
48.75"(1238mm)
24.00"(610mm)
3.75"(95mm)
5.14"(130mm)
16.00"(406mm)
24.75"(628mm)
n/a
4' unit 2' unit
2" dia. ko4' unit
2' unit
(2) 1/2" emt kos (6) .31" dia. holes .75" x 1.5" oblong holen/a (4) .31" dia. holes
DIMensIonal DaTa Cross section Baseplate
Corner mounting Adapter (Cm)
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
sheriff™sH524 anD sH548 seRIes CEILING/waLL mOUNT/SURFaCE
Lamps: biax, T8, T5, T5HOSize: Nominal 5"x24" and 5"x48"
width Length Depth5.14" 24.75" 3.75"5.14" 48.75" 3.75"
nominal Length24 2’ 48 4’
Lamp Qty1 One Lamp2 Two Lamps3 Three Lamps
* available with one lamp only
Lamp typeTwo Foot Lengths14* F14T517 F17T8 (2’ only)40b F40TT (1)Four Foot Lengths28* F28T532 F32T8 (4’ only)54* F54T5HO40b F40TT (2)
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (CFL, T8, T5, T5HO) Cw Cold weatherSb Specified ballast
Ballast Qty1 One2 TwoT Tandem wiring (Consult factory)
Voltage120 120 volt277 277 volt347 347 voltDv 120/277 volts (<10% THD), electronic ballasts only
options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount
AccessoriesCmw Corner mount adapter – wet Location Covered, Ceiling only9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.
BAsePLAte: One-piece 16-gauge CRS base-plate with welded corners. baseplate provided with four-point (2 foot) or six-point (4 foot) mounting holes and one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel pOSIGRIp™ fasteners (two fasteners/2 foot; six fasteners/4 foot). baseplate/end caps mount flush to ceiling or wall surface.
eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.
LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.
InstALLAtIon: Four-point (2 foot) or six-point (4 foot) mounting required for peace of mind Lifetime Guarantee™.
PHotometrICs: For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessories Qty type type Qty
DIMensIonal DaTa
Cross section Baseplate
sH5
7710�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
24.00"(609mm)
32.00"(812mm)
48.75"(1238mm)
16.00"(406mm)
6.50"(165mm)
1.50" dia. Wire thru k.o.
(2) 0.875" dia. k.o.'s
(6) .312" dia.mounting holes
3.50"(89mm)
(2) keyholes fortemporary "J"box instalation
8.312"(211mm)
2.75"(69mm)
16.00"(406mm)
24.75"(629mm)
6.50"(165mm)
1/2" emt hole (7/8" dia.)
(4) .312" dia.mounting holes
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
sheriff™sH824 anD sH848 seRIes CEILING/waLL mOUNT/SURFaCE
Lamps: T8, T5, T5HOSize: Nominal 8"x24" and 8"x48"
width Length Depth8.31" 24.75" 2.75"8.31" 48.75" 2.75"
nominal Length24 2’ 48 4’
Lamp Qty2 Two Lamps
Lamp typeTwo Foot Lengths17 F17T8 Four Foot Lengths28 F28T532 F32T854 F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (T8, T5, T5HO) Cw Cold weatherSb Specified ballast
Ballast Qty1 One2 TwoT Tandem wiring (Consult Factory)
Voltage120 120 volt277 277 volt347 347 voltDv 120/277 volts (<10% THD), electronic ballasts only
options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF) (4' only)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount
Accessory9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.
HousInG: One-piece, seam welded 16-gauge CRS baseplate and end caps. baseplate provided with four-point (2 foot) or six-point (4 foot) mounting holes and one wireway hole – see Cross Section/Details. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens is positioned in baseplate channels and retained with stainless steel pOSIGRIp™ fasteners two fasteners/2 foot; six fasteners/4 foot). baseplate/end caps mount flush to ceil-ing or wall surface.
eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.
LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.
InstALLAtIon: Four-point (2 foot) or six-point (4 foot) mounting required for peace of mind Lifetime Guarantee™.
PHotometrICs: For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessory Qty type type Qty
DIMensIonal DaTa
Cross section Baseplate
sH8 2
78 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
24.00"(609mm)
32.00"(812mm)
48.75"(1238mm)
16.00"(406mm)
9.50"(241mm)
1.50" Dia. Wire Thru K.O.
(2) 0.875" Dia. K.O.'s
(6) .312" Dia.Mounting Holes
3.50"(89mm)
(2) Keyholes ForTemporary "J"Box Installation
12.31"(312mm)
2.75"(69mm)
12.31"(312mm)
2.75"(69mm)
32.00"(812mm)
48.75"(1238mm)
16.00"(406mm)
9.50"(241mm)
1.50" Dia. Wire Thru K.O. (6) .312" Dia.Mounting Holes
3.50"(89mm)
(2) Keyholes ForTemporary "J"Box Installation
pROJECT INFORmaTION
Job Name
Fixture Type
Catalog Number
approved by
sheriff™sH1248 seRIes CEILING/waLL mOUNT/SURFaCE
Lamps: T8, T5, T5HOSize: Nominal 12"x48"
width Length Depth12.3" 48.75" 2.75"
nominal Length48 4’
Lamp Qty2 Two Lamps3 Three Lamps4 Four Lamps
* available with two/three lamps only.
Lamp type28* F28T532 F32T854* F54T5HO
Ballast typeIS Instant Start Electronic <10% THD (T8) RS Rapid Start Electronic <10% THD (T8, T5, T5HO) Cw Cold weatherSb Specified ballast
Ballast Qty1 One2 TwoT Tandem wiring (Consult Factory)
Voltage120 120 volt277 277 volt347 347 volt (T8 only)Dv 120/277 volts (<10% THD), electronic ballasts only
options.187 .187" p12 polycarbonate LensOp Opal polycarbonate LensaL marine Grade aluminum HousingbSS brush Stainless Steel HousingpSS painted Stainless Steel HousingEL T-8 One-Lamp Indoor battery pack (32ºF)EL2 T-8 1100 Lumen One-Lamp Indoor battery pack (32ºF)FS Single Fuse & HolderkO Two 1/2" EmT Conduit Entry knockouts (one per end cap)TN 5 watt Twin Tube NpF Night LightDLN LED Night Light w/Light Level Control pm pendant mount - 2 and 4 lamppm3 pendant mount - 3 lamp
Accessory9500 pOSIGRIp™ Screwdriver
sPecIfIcaTIons
Lens: Cold formed .156" p12 polycarbonate lens. See Options for alternate lenses.
HousInG: One-piece, 16-gauge CRS base-plate and seam welded end caps. baseplate provided with four-point mounting holes and one wireway hole – see Cross Section/De-tails. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options for alterna-tive materials and finishes. Lens is positioned in baseplate channels and retained with six stainless steel pOSIGRIp™ fasteners. base-plate/end caps mount flush to ceiling or wall surface.
eLeCtrICAL: Class p ballasts. Fluorescent electronic 120/277/347 and dual voltage bal-lasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
soCkets: Shock-resistant sockets with internal locking collar to ensure positive lamp retention.
HArDWAre: Stainless steel pOSIGRIp™ fasteners secure lens in baseplate channel.
LIstInGs/CertIFICAtIons: UL and CUL listed for Damp Locations – wall mount. UL and CUL listed for wet Location – covered ceilings only.
InstALLAtIon: Six-point mounting required for peace of mind Lifetime Guarantee™.
PHotometrICs: For additional photometric information, go to www.kenall.com.
oRDeRIng InfoRMaTIonseries Length Lamp Lamp Ballast Ballast Voltage options Accessory Qty type type Qty
DIMensIonal DaTa
Cross section Baseplate
sH12 48
7�10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
RecoMMenDeD fIxTuRes foR buIlDIng exTeRIoRs
MIllenIuM™ RounDs anD ovals
MIllenIuM fReescale™
For more information, visit us at www.kenall.com.
mR17EL/ESR/ED mR17bL/bSR/bD mR17CL/CSR/CD mR17FL/FSR/FD mR17Sp/Rp mR17Np/wp
FS512R/T FS812R/T FS1212R/T
mR13EL/ESR/ED mR13bL/bSR/bD mR13CL/CSR/CD mR13FL/FSR/FD
mO13EL/ED mO13bL/bD mO13CL/CD mO13FL/FD
mO13HL/HD mO13HbL/HbD
FS518R/T FS818R/T FS1218R/T
FS524R/T FS824R/T FS1224R/T
FS548R/T FS848R/T FS1248R/T
80 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
RecoMMenDeD fIxTuRes foR buIlDIng exTeRIoRs
MIllenIuM fInITe™
HeRculux™
H99SL/Sm/SD H99DSL/DSm/DSD H1212FL/Fm/FD H1212EL/Em/ED
H69FL/Fm/FD H69EL/Em/ED H612FL/Fm/FD H612EL/Em/ED H99FL/Fm/FD H99EL/Em/ED
H1212SL/Sm/SD H1212DSL/DSm/DSD
FN15L FN15D FN9L FN9D
For more information, visit us at www.kenall.com.
8110�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
This unique two week (10 working day, holidays excluded) shipment program offers nominal four foot linear fluores-cent pre-engineered wall, Corner, Recessed or Surface fixtures for small order quantities. The weekly order quantity maximum is 50 per customer ship to address. Standard specification sheet pDFs are available at www.kenall.com to promote these products. No UpS shipments.
Hsg/base Lamp Lamp ballast ballast Lens StandardSeries material qty Type Type qty voltage Inner/Outer Fastener Options
XwCU4 0/0 1/2 32 RS 1 or 2 120 or 277 1/b 1 TN
XCC4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TNXCC4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN
XRCa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN-YFXRCa4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN-YF
XRCD4 0/0 4 32 RS 1 or 2 120 or 277 1/b 1 TN-YF
XSSa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN
XSSb4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TNXSSb4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN
XSSD4 0/0 4 32 RS 1 or 2 120 or 277 1/b 1 TN
XSDa4 0/0 2 32 RS 1 or 2 120 or 277 1/b 1 TN
XSDD4 0/0 3 32 RS 1 or 2 120 or 277 1/b 1 TN
Note: Lamps by others.
quIck sHIP
8� 10�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
aDDITIonal lITeRaTuRe avaIlable
architectural high abuse lightingfor schools and universities
KENALL DARK SKY LUMINAIRESMillenium Finite™ – Wall MountMillenium Edge™ – Ceiling MountHerculux™ – Wall and Ceiling Mount
Dark-Sky Friendly Fixture
®APPROVED
MILLENIUM FREESCALE™ARCHITECTURAL SCONCES
Attractive, Tough and EfficientCUSTOMIZABLE LIGHTING SOLUTIONS
millenium metrex™architectural high abuse led exit signs
herculux™compact fluorescent and hid luminairesfor ceiling and Wall installation
kenall express™ – 24 hour ship architectural high abuse lighting for schools & universities
kenall dark sky luminaires
millenium freescale™ millenium metrex™ herculux™
visit kenall's web site at www.kenall.com for our latest product information.at this site you can:• obtain up-to-date technical information• download photometric files• view the latest product installations
the kenall web site is frequently updated to bring you the most current information available on the full line of kenall products.
8310�0 Lakeside Drive Gurnee, Illinois 60031 847-360-8�00 FAX 847-360-1781 www.kenall.com
1020 Lakeside Drive Gurnee, Illinois 60031 847-360-8200 FaX 847-360-1781 www.kenall.com ©2009 kenall