LIGHT INDUSTRIAL TANKS ULC-S601, ULC-S602, ULC-S652

BUILT TOUGH TO HANDLE ANY JOB

YEARS

W

ARRANTY

10SE

E W

A

RR A N T Y C E R

TI F

I CA

T

UP TO

WWW.GRANBYINDUSTRIES.COM

Tough and durable, our light industrial tanks will meet your various storage requirements

ULC-S601 DOUBLE-WALL VACUUM MONITORED TANK

• Capacity of 9 176 liters

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• High quality emergency vent

• 8 openings on top

• Integral spill box containment in accordance to ULC-S663

• Available hot dipped galvanized steel ladder and fill platform, on-site installation required

• Available hot dipped galvanized steel staircase and fill platform. The staircase can be mounted on the right, the left or in center of the fill platform without any additional cost and component; on-site installation required

• Mounting brackets for addition of pump, dispenser, hose retriever and emergency stop on opposite end of the ladder or staircase

• Optional vacuum loss switch

• Steel surface sandblasted and coated with Granby’s white polyurethane paint

Shown: 9 176 L + ladder

Shown: 9 176 L + stairs

STATIONARY TANKS - GENERAL SPECIFICATIONS

• ASTM A 1011 Steel• NPT female threaded openings• Capacity ranging from

125 to 2000 Gallons

• Double wall tanks• Each tank is manufactured and

controlled, tested and labeled in accordance with ULC-S601 standard for flammable and combustible liquids

ULC-S601 DOUBLE-WALL VACUUM MONITORED TANK

• Capacities ranging from 570 liters to 4 550 liters

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• High quality emergency vent

• 6 openings on top

• Integral spill box containment in accordance to ULC-S663

• Optional hot-dipped galvanized step available on 38.5’’ and 50.5’’ diameter tanks; on-site installation required

• Optional vacuum loss switch

• Steel surface is phosphate washed and coated with Granby’s white polyurethane paint

• Steel surface sandblasted and coated with Granby’s white superior polyurethane 10+ paint also available

ULC-S601 DOUBLE-WALL INTERGRALLY CONTAINED TANK

• Capacities ranging from 2 275 liters to 4 550 liters

• The integrity of the primary tank is verified by a mechanical leak detector

• Equipped with a visual leak indicator gauge

• Two (2) high quality emergency vents

• Only one (1) atmospheric vent required

• 6 openings on top

• Integral spill box containment in accordance to ULC-S663

• Optional hot-dipped galvanized step; on-site installation required.

• Optional electronic leak detector

• Steel surface is phosphate washed and coated with Granby’s white polyurethane paint

Shown: 2 275 L + step

Shown: 4 550 L

ULC-S602 DOUBLE-WALL HORIZONTAL TANK WITH SECONDARY CONTAINMENT

• Capacities ranging from 227 liters to 2 275 liters

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• Optional vacuum loss switch

• Vacuum leak detection monitoring system can be replaced on site by a liquid leak detector (mechanical or electronic)

• Up to eight (8) openings on top

• Steel surface is phosphate washed and coated with Granby’s white polyurethane paint

ULC-S602 DOUBLE-WALL VERTICAL TANK

• Capacities available from 227 liters to 2 275 liters

• VCC MODELS (double wall secondary containment)

• The integrity of the primary tank is verified by a mechanical leak detector

• Equipped with a visual leak indicator gauge

• Up to eight (8) openings on top

• Optional electronic leak detector

• Steel surface is phosphate washed and coated with Granby’s white polyurethane paint

• VCD MODELS (double wall, vacuum monitored)

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• Optional vacuum loss switch

• Up to eight (8) openings on top

• Steel surface sandblasted and coated with Granby’s white superior polyurethane 10+ paint

Shown: 2 275 L

Shown: 1 135 L

AUXILIARY TANKS - GENERAL SPECIFICATIONS

• ASTM A 1011 Steel• NPT female threaded openings• Capacity ranging from 50 to 500 Gallons• Double wall tanks

• Each tank is manufactured and controlled, tested and labeled in accordance with ULC-S602 standard for flammable liquids and lubricant oil

ULC-S652 DOUBLE-WALL VACUUM MONITORED HORIZONTAL USED OIL TANK

• Available in capacities of 1 135L, 2 275L and 4 550L.

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• High quality emergency vent

• Internal two (2) inches suction pipe

• Pumper truck camlock 2’’ connection with dust cap installed inside spill box

• Drip pan installed inside spill box

• Six (6) openings on top

• Optional vacuum loss switch

• Optional hot-dipped galvanized step available, on-site installation required

• Steel surface sandblasted and coated with Granby’s white superior polyurethane 10+ paint

Shown: 1000 L

Shown: 500 Gal + stairs option

USED OIL TANKS - GENERAL SPECIFICATIONS

• ASTM A 1011 Steel• NPT female threaded openings• Available in 250 Gallons, 500 Gallons

and 1000 Gallons

• Double wall tanks• Each tank is manufactured and controlled,

tested and labeled in accordance with ULC-S652 standard for used oils

ULC-S602 DOUBLE-WALL VACUUM MONITORED OBROUND TANK

• Available in capacities of 850 liters, 1 000 liters and 1 200 liters

• The double wall interstice is factory shipped under vacuum for constant monitoring of both walls’ integrity

• Equipped with a vacuum gauge for visual monitoring of leaks in the interstitial space

• Optional vacuum loss switch

• Eight (8) openings on top

• Steel surface is phosphate washed and coated with Granby’s white polyurethane paint

For more information, please contact our main office at1020 André-Liné Street Granby, Quebec J2J 1J9 Canada@ sales@granbyindustries.comW granbyindustries.com TN

K.G

BYI

ND

US

-EN

C-0

21

8

* Contact your representative for more information on the different additional accessories available.

TANK CAPACITY AND DIMENSIONS

Granby Storage Tanks offers light industrial tanks of different capacities for the storage of fuel, diesel, kerosene, lubricating oil and used oil. Tank weight vary according to the chosen model and options. Refer to the table below or to our website for further details.

DOUBLE WALL HORIZONTAL DAY TANKSCLOSED SECONDARY CONTAINMENT TANK, ULC-S602 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

3002C222NCAA 227 50 23” 40” 2.5mm 199 90

3006C222NCAA 570 125 30.5” 49” 2.5mm 341 155

3011C222NCAA 1135 250 38.5” 60” 2.5mm 531 241

3014C222NCAA 1360 300 50.5” 72” 2.5mm 601 273

3020C232NCAA 1915 420 50.5” 60” 2.5mm 774 352

3023C242NCAA 2275 500 50.5” 72” 2.5mm 867 394

DOUBLE WALL HORIZONTAL DAY TANKSCLOSED SECONDARY CONTAINMENT TANK, ULC-S602 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

125F22NCAA 1200 48 28” 75” 2.5mm 626 285

124F22NCAA 1000 48 28” 63” 2.5mm 547 249

127F22NCAA 830 48 28” 52” 2.5mm 478 217

DOUBLE WALL HORIZONTAL DAY TANKSCLOSED SECONDARY CONTAINMENT TANK, ULC-S602 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

3011W222PCAA-07 1135 250 38.5” 60” 2.5mm 587 267

3023W242PCAA-07 2275 500 50.5” 72” 2.5mm 926 421

3046W222PCAA-07 4550 1000 50.5” 142” 2.5mm 1478 672

DOUBLE WALL STATIONARY TANKS, WITHOUT VACUUM MONITORINGINTEGRALLY CONTAINED MODELS, ULC-S601 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

3023D242NCAA-07 2275 500 50.5” 72” 2.5mm 940 426

3046D222NCAA-07 4550 1000 50.5” 142” 2.5mm 1500 680

DOUBLE WALL STATIONARY TANKS, VACCUMPHOSPHATE CLEANED MODELS WITH WHITE POLYURETHANE PAINT, ULC-S601 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

30060222NCAA-07 570 125 30.5” 49” 2.5mm 378 172

30110222NCAA-07 1135 250 38.5” 60” 2.5mm 542 246

30140222NCAA-07 1360 300 38.5” 72” 2.5mm 635 289

30200232NCAA-07 1915 420 50.5” 60” 2.5mm 809 268

30200242NCAA-07 2275 500 50.5” 72” 2.5mm 901 410

30390222NCAA-07 3800 835 50.5” 120” 2.5mm 1268 576

30460222NCAA-07 4550 1000 50.5” 142” 2.5mm 1454 661

SANDBLASTED MODELS WITH WHITE POLYURETHANE PAINT, ULC-S601 LISTED

30910053SCAA-07 9176 2000 70” 144” 2.5mm 2000 889

SANDBLASTED MODELS WITH WHITE SUPERIOR POLYURETHANE PAINT, ULC-S601 LISTED

30910053SCAA-07 570 125 30.5” 49” 2.5mm 378 172

30910053SCAA-07 1135 250 38.5” 60” 2.5mm 542 246

30910053SCAA-07 1360 300 38.5” 72” 2.5mm 635 289

30910053SCAA-07 1915 420 50.5” 60” 2.5mm 809 268

30910053SCAA-07 2275 500 50.5” 72” 2.5mm 901 410

30910053SCAA-07 3800 835 50.5” 120” 2.5mm 1268 576

30910053SCAA-07 4550 1000 50.5” 142” 2.5mm 1454 661

DOUBLE WALL VERTICAL DAY TANKSCLOSED SECONDARY CONTAINMENT TANK, ULC-S802 LISTED

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

VCC22050NCAA 227 50 22.75” 42,75” 2.5mm 214 97

VCC22100NCAA 454 100 30.75” 46” 2.5mm 314 143

VCC22150NCAA 680 150 30.75” 66” 2.5mm 427 194

VCC22200NCAA 910 200 38.5” 55” 2.5mm 488 222

VCC22250NCAA 1135 250 38.5” 66” 2.5mm 562 255

VCC22300NCAA 1360 300 38.5” 78” 2.5mm 643 292

VCC22500NCAA 2275 500 50.5” 78” 2.5mm 904 411

DOUBLE WALL, SANDBLASTED, WHITE POLYURETHANE 10PLUS ULC-S602

Capacity Dimensions Weight

PART LITERS GAL DIA LENGHT GAUGE POUNDS KG

VCD22050PCAA 227 50 22.75” 42,75” 2.5mm 214 97

VCD22100PCAA 454 100 30.75” 46” 2.5mm 314 143

VCD22150PCAA 680 150 30.75” 66” 2.5mm 427 194

VCD22200PCAA 910 200 38.5” 55” 2.5mm 488 222

VCD22250PCAA 1135 250 38.5” 66” 2.5mm 562 255

VCD22300PCAA 1360 300 38.5” 78” 2.5mm 643 292

VCD22500PCAA 2275 500 50.5” 78” 2.5mm 904 411