Lifting Units and Accessories...Page 30 4115.00 Bevel gear with syncronous telescopicspindle Page 32...
Transcript of Lifting Units and Accessories...Page 30 4115.00 Bevel gear with syncronous telescopicspindle Page 32...
-
Lifting Units and Accessories
-
The spirit of innovation and a sense of ideas beyond the familiar has made us into a pioneering company over more than 185 years.
For a quarter of a century, we have been offering customized drive solu-tions for office and workplace work-stations, as well as for shading sys-tems and building technology.
Through our tradition of innovation, we have succeeded in establishing ourselves as a specialist and prob-lem-solver in numerous areas.
Over 185 years’experience
100%Made in Black Forest
WE GET IDEAS MOVING
More than 60 standardsolutions for four different
market segments
Ergonomics Professional
Building Drives
Ergonomics Home & Care
IndustrialDrives
2
-
Liftung Units Page 04 3010 Bevel gear with spindle unitPage 06 3014 Bevel gear with spindle unitPage 08 3034 Bevel gear with spindle unitPage 10 3035 Bevel gear with spindle unitPage 12 3039 Bevel gear with spindle unitPage 14 3042 Bevel gear with spindle unitPage 16 3045 Bevel gear with spindle unitPage 18 3070 Bevel gear with spindle unitPage 20 3130.14 Spindle unit with motoradapterPage 24 3824 Bevel gear with spindle unitPage 26 4115.14 Synchronous telescopic spindle unitPage 30 4115.00 Bevel gear with syncronous telescopicspindle
Page 32 3052.09 Brake unitPage 34 5102/5159 Crank handlesPage 36 5180 Crank-handlePage 38 5186 Crank-handlePage 40 5187 Crank-handlePage 42 5190 Crank-handlePage 44 Control box CompactPage 46 Hand control and motor cablesPage 48 Profile tubes - Profile rods
Accessories
THE RIGHT PRODUCT FOR EACH APPLICATION
www.ketterer.de 3
-
Bevel gear with spindle unit 3010/3011
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential and office fields.Simple screw fastenings enable a simple system structure and an uncom-plicated assembly.
Special features ▪ Maintenance-free ▪ Ratio in direction of spindle 1.3:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Housing made of glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Designed for the manual operation ▪ Variable number of bevel gears for deflection of movement and
freely selectable drive position ▪ Upon request other spindle types can be supplied
Variant key ▪ 3010: variants with right rotating spindles ▪ 3011: variants with left rotating spindles
Retracted length E to customer specification
Mounting adapter 4 mounting holes M5/ 5 deep
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 3 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Spindle
Suppport tube
Mounting adapter
Input hex 6 mm
Application example
Technical data
Model 3010 3011
Ratio in direction of spindle 1.3:1 1.3:1
Ratio in direction of deflection 1:1 1:1
Input hex 6 mm hex 6 mm
Number of bevel wheels max. 5 max. 5
Type of spindle TR14x3 RH TR14x3 LH
Travel path 2.3 mm/rotation 2.3 mm/rotation
Max. Stroke retracted length -99 mm retracted length -99 mm
Max. lifting force 1200 N 1200 N
Required drive torque 1.7 Nm 1.7 Nm
Max. drive torque gear head for several spindle units*
3 Nm 3 Nm
* See technical notes
Output spindleInput
29.5
16
square22
24 1144
Y X
hex 6
17.5
2.5
Stroke H customized12
View Y
Number of bevel gears for deflection of movement and the drive position are customer specific
16.5
9
M6/
17
deep
R 4.5
View X (Rotation stop)
Table top
u
30
30
www.ketterer.de6 73010.75-02/20190318
Lift
ing
Uni
ts
4
-
Bevel gear with spindle unit 3010/3011
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential and office fields.Simple screw fastenings enable a simple system structure and an uncom-plicated assembly.
Special features ▪ Maintenance-free ▪ Ratio in direction of spindle 1.3:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Housing made of glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Designed for the manual operation ▪ Variable number of bevel gears for deflection of movement and
freely selectable drive position ▪ Upon request other spindle types can be supplied
Variant key ▪ 3010: variants with right rotating spindles ▪ 3011: variants with left rotating spindles
Retracted length E to customer specification
Mounting adapter 4 mounting holes M5/ 5 deep
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 3 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Spindle
Suppport tube
Mounting adapter
Input hex 6 mm
Application example
Technical data
Model 3010 3011
Ratio in direction of spindle 1.3:1 1.3:1
Ratio in direction of deflection 1:1 1:1
Input hex 6 mm hex 6 mm
Number of bevel wheels max. 5 max. 5
Type of spindle TR14x3 RH TR14x3 LH
Travel path 2.3 mm/rotation 2.3 mm/rotation
Max. Stroke retracted length -99 mm retracted length -99 mm
Max. lifting force 1200 N 1200 N
Required drive torque 1.7 Nm 1.7 Nm
Max. drive torque gear head for several spindle units*
3 Nm 3 Nm
* See technical notes
Output spindleInput
29.5
16square22
24 1144
Y X
hex 6
17.5
2.5
Stroke H customized12
View Y
Number of bevel gears for deflection of movement and the drive position are customer specific
16.5
9
M6/
17
deep
R 4.5
View X (Rotation stop)
Table top
u
30
30
www.ketterer.de6 73010.75-02/20190318
Lift
ing
Uni
ts
5
-
Bevel gear with spindle unit 3014
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential and office fields.Simple screw fastenings enable a simple system structure and an un- complicated assembly.
Special features
▪ Maintenance-free ▪ Deflection angle: 120° or 135°, i = 1:1 ▪ Ratio in direction of spindle 1.3:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Designed for the manual operation ▪ Upon request other spindle types can be supplied
InputOutput spindle
Retracted length E customized
square22
24 11
44
Y X
hex 6
29.5
Mounting adapter 4 mounting holes M5/ 5 deep
16
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 3 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Support tube
Spindle
Mounting adapterInput hex 6 mm
Application example
Technical data
Model 3014
Ratio in direction of spindle 1.3:1
Ratio in direction of deflection 1:1
Input hex 6 mm
Number of bevel wheels 3
Type of spindle TR14x3 RH
Travel path 2.3 mm/rotation
Max. stroke retracted length -99 mm
Max. lifting force 1200 N
Required drive torque 1.7 Nm
Max. drive torque gear head for several spindle units*
3 Nm
* See technical notes
u
View Y
The drive position is freely selectable
120° or 135° angle
Stroke H customized 17.5
2.5
16.5
9
M6/
17
deep
R 4.5
View X(Rotation stop)
Table top
Mounting adapter The adapter alignment is freely selectable
www.ketterer.de8 93014.75-02/20190225
Lift
ing
Uni
ts
6
-
Bevel gear with spindle unit 3014
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential and office fields.Simple screw fastenings enable a simple system structure and an un- complicated assembly.
Special features
▪ Maintenance-free ▪ Deflection angle: 120° or 135°, i = 1:1 ▪ Ratio in direction of spindle 1.3:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Designed for the manual operation ▪ Upon request other spindle types can be supplied
InputOutput spindle
Retracted length E customized
square22
24 11
44
Y X
hex 6
29.5
Mounting adapter 4 mounting holes M5/ 5 deep
16
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 3 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Support tube
Spindle
Mounting adapterInput hex 6 mm
Application example
Technical data
Model 3014
Ratio in direction of spindle 1.3:1
Ratio in direction of deflection 1:1
Input hex 6 mm
Number of bevel wheels 3
Type of spindle TR14x3 RH
Travel path 2.3 mm/rotation
Max. stroke retracted length -99 mm
Max. lifting force 1200 N
Required drive torque 1.7 Nm
Max. drive torque gear head for several spindle units*
3 Nm
* See technical notes
u
View Y
The drive position is freely selectable
120° or 135° angle
Stroke H customized 17.5
2.5
16.5
9
M6/
17
deep
R 4.5
View X(Rotation stop)
Table top
Mounting adapter The adapter alignment is freely selectable
www.ketterer.de8 93014.75-02/20190225
Lift
ing
Uni
ts
7
-
Bevel gear with spindle unit 3034
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free▪ Very slim size 25.8 mm x 25.8 mm▪ Drive torque on gear head for application with several spindle units:
max. 3.5 Nm▪ Housing made of glass fi ber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Support tube round Ø 20 mm or square 22 mm▪ Suitable for manual use as well as for the electromotive drive
Variant key
3034.00-V01: spindle SG12x16P4 RH with a round support tube3034.00-V02: spindle SG12x16P4 RH with a square support tube3034.00-V03: spindle Tr14x3 RH with a square support tube3034.00-V04: spindle SG14x16P4 RH with a square support tube
Length E (retracted)
9.5
24
44
ø20
19
12
12.5
Z
8.5
ø8
3034.00-V01
Spindle
Mounting bolts
Support tube
Input hex 6 mm
* In combination with LogicData control box Compact-3
Technical data
Model 3034.00-V01EXXXHXXX 3034.00-V02EXXXHXXX 3034.00-V03EXXXHXXX 3034.00-V04EXXXHXXX
Ratio 1:1 1:1 1:1 1:1
Input hex 6 mm hex 6 mm hex 6 mm hex 6 mm
Type of spindle SG12x16P4 RH SG12x16P4 RH TR14x3 RH SG14x16P4 RH
Travel path 16 mm/rotation 16 mm/rotation 3 mm/rotation 16 mm/rotation
Traverse speed * 32 mm/s 32 mm/s 6 mm/s 32 mm/s
Support tube round ø 20 mm square 22 mm square 22 mm square 22 mm
Max. stroke retracted length - 90 mm
retracted length - 100 mm
retracted length - 100 mm
retracted length - 100 mm
Max. lifting force 700 N 700 N 700 N 700 N
Required drive torque 3.2 Nm 3.2 Nm 1 Nm 3 Nm
View Z
4.5
ø4.8
ø2
0
ø 3.4 (2x)Mounting holes WN1452 K40x16tightening torque 1.8 Nm
Application example
3
No mounting holes
hex
6
Additional mounting holesø 3.6, max. 4.5 deep (double-sided) for screw M4
ø4.1 (2x)
25.8
25.8
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
▪ Installation instructions: use at least 2 M4 screws when fastening. Using bore holes ø 4.1 mm (2x) when doing so, preferable the lifting unit should be supported above on the top side. Connection by means of additional moun-ting holes ø 3.6 mm for M4 requires top side support.
View Y
Y
Length E (retracted)
3034.00-V02, 3034.00-V03, 3034.00-V04
Table top
square22
12
www.ketterer.de10 113034.75-02/20200415
Lift
ing
Uni
ts
8
-
Bevel gear with spindle unit 3034
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free▪ Very slim size 25.8 mm x 25.8 mm▪ Drive torque on gear head for application with several spindle units:
max. 3.5 Nm▪ Housing made of glass fi ber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Support tube round Ø 20 mm or square 22 mm▪ Suitable for manual use as well as for the electromotive drive
Variant key
3034.00-V01: spindle SG12x16P4 RH with a round support tube3034.00-V02: spindle SG12x16P4 RH with a square support tube3034.00-V03: spindle Tr14x3 RH with a square support tube3034.00-V04: spindle SG14x16P4 RH with a square support tube
Length E (retracted)
9.5
24
44
ø20
19
12
12.5
Z
8.5
ø8
3034.00-V01
Spindle
Mounting bolts
Support tube
Input hex 6 mm
* In combination with LogicData control box Compact-3
Technical data
Model 3034.00-V01EXXXHXXX 3034.00-V02EXXXHXXX 3034.00-V03EXXXHXXX 3034.00-V04EXXXHXXX
Ratio 1:1 1:1 1:1 1:1
Input hex 6 mm hex 6 mm hex 6 mm hex 6 mm
Type of spindle SG12x16P4 RH SG12x16P4 RH TR14x3 RH SG14x16P4 RH
Travel path 16 mm/rotation 16 mm/rotation 3 mm/rotation 16 mm/rotation
Traverse speed * 32 mm/s 32 mm/s 6 mm/s 32 mm/s
Support tube round ø 20 mm square 22 mm square 22 mm square 22 mm
Max. stroke retracted length - 90 mm
retracted length - 100 mm
retracted length - 100 mm
retracted length - 100 mm
Max. lifting force 700 N 700 N 700 N 700 N
Required drive torque 3.2 Nm 3.2 Nm 1 Nm 3 Nm
View Z
4.5
ø4.8
ø2
0ø 3.4 (2x)Mounting holes WN1452 K40x16tightening torque 1.8 Nm
Application example
3
No mounting holes
hex
6
Additional mounting holesø 3.6, max. 4.5 deep (double-sided) for screw M4
ø4.1 (2x)
25.8
25.8
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
▪ Installation instructions: use at least 2 M4 screws when fastening. Using bore holes ø 4.1 mm (2x) when doing so, preferable the lifting unit should be supported above on the top side. Connection by means of additional moun-ting holes ø 3.6 mm for M4 requires top side support.
View Y
Y
Length E (retracted)
3034.00-V02, 3034.00-V03, 3034.00-V04
Table top
square22
12
www.ketterer.de10 113034.75-02/20200415
Lift
ing
Uni
ts
9
-
45
27
37
square22
hex
6
35
35
Stroke H customized
Retracted length E customized
Bevel gear with spindle unit 3035/ 3036
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Ratio in direction of spindle: 1:1 oder 1.5:1 ▪ Very slim size 35 mm x 35 mm ▪ Drive torque on gear head for application with several spindle units:
max. 4 Nm ▪ Housing made of zinc and glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Support tube square 22 mm ▪ Suitable for manual use as well as for electromotive drives
ø 3.65 (4x)for screw DIN 7500
View Y
Y X
View X (Rotation stop)
* In combination with motor 3143 and LogicData control box Compact-3** See technical data
Technical data
Model 3035 3036
Ratio in direction of spindle 1.5:1 1:1
Input hex 6 mm hex 6 mm
Type of spindle Tr14x3 RH Tr14x3 RH
Travel path 2 mm/rotation 3 mm/rotation
Traverse speed* 4 mm/s 6 mm/s
Max. stroke retraced length -105 mm retracted length -105 mm
Max. lifting force 1000 N 1000 N
Required drive torque 1 Nm 1.3 Nm
Max. drive torque gear ahead for several spindle units**
4 Nm 4 Nm
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Installation note: Use at least 2 opposite fixing
holes ø 3.65 for DIN 7500 screws.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
17.5
2.5
16.5
9
M6/
17
deep
R 4.5
www.ketterer.de12 133035.75-02/20200415
Lift
ing
Uni
ts
10
-
45
27
37
square22
hex
6
35
35
Stroke H customized
Retracted length E customized
Bevel gear with spindle unit 3035/ 3036
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Ratio in direction of spindle: 1:1 oder 1.5:1 ▪ Very slim size 35 mm x 35 mm ▪ Drive torque on gear head for application with several spindle units:
max. 4 Nm ▪ Housing made of zinc and glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Support tube square 22 mm ▪ Suitable for manual use as well as for electromotive drives
ø 3.65 (4x)for screw DIN 7500
View Y
Y X
View X (Rotation stop)
* In combination with motor 3143 and LogicData control box Compact-3** See technical data
Technical data
Model 3035 3036
Ratio in direction of spindle 1.5:1 1:1
Input hex 6 mm hex 6 mm
Type of spindle Tr14x3 RH Tr14x3 RH
Travel path 2 mm/rotation 3 mm/rotation
Traverse speed* 4 mm/s 6 mm/s
Max. stroke retraced length -105 mm retracted length -105 mm
Max. lifting force 1000 N 1000 N
Required drive torque 1 Nm 1.3 Nm
Max. drive torque gear ahead for several spindle units**
4 Nm 4 Nm
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Installation note: Use at least 2 opposite fixing
holes ø 3.65 for DIN 7500 screws.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
17.5
2.5
16.5
9
M6/
17
deep
R 4.5
www.ketterer.de12 133035.75-02/20200415
Lift
ing
Uni
ts
11
-
Bevel gear with spindle unit 3039
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Ratio 1:1 ▪ Max. drive torque on gear head depending on spindle pitch:
max. 4 Nm ▪ Housing made of glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Suitable for manual use as well as for electromotive drives
Variant key
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
▪ Installation instructions: Use at least 2 M4 screws when fastening using through going boreholes ø 4.1 (4x). When doing so, preferably the lifting unit should be sup-ported above on the top side.
Stroke XXX in mmRetracted length XXX in mmVariant, Type of spindle X: 1: Tr14x3 RH 2: SG14x16P4 RH
3039.00- V0 X E XXX H XXX
Stroke H customized
Length E (retracted)
7.6
24
44
square22Output spindle
19
12
14.4
Mounting holes ø 4.1 (4x)
No mounting holes
24
hex
6
Y X
* In combination with drive 3130.00 and LogicData control box Compact-3
Technical data
Model 3039.00-V01EXXXHXXX 3039.00-V02EXXXHXXX
Ratio 1:1 1:1
Input hex 6 mm hex 6 mm
Type o spindle Tr14x3 RH SG14x16P4 RH
Travel path 3 mm/rotation 16 mm/rotation
Traverse speed* 7.5 mm/s 40 mm/s
Max. stroke H retracted length -99 mm retracted length -99 mm
Max. lifting force 1200 N 800 N
Required drive torque 1.7 Nm 3.5 Nm
Application example
30
30
View Y View X (Rotation stop)
17.5
2.5
No mounting hole
16.5
9
M6/
17
deep
R 4.5
Table top
Support tube
Input hex 6 mm
Spindle
www.ketterer.de14 153039.75-02/20200415
Lift
ing
Uni
ts
12
-
Bevel gear with spindle unit 3039
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Ratio 1:1 ▪ Max. drive torque on gear head depending on spindle pitch:
max. 4 Nm ▪ Housing made of glass fiber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Suitable for manual use as well as for electromotive drives
Variant key
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instruc-tions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
▪ Installation instructions: Use at least 2 M4 screws when fastening using through going boreholes ø 4.1 (4x). When doing so, preferably the lifting unit should be sup-ported above on the top side.
Stroke XXX in mmRetracted length XXX in mmVariant, Type of spindle X: 1: Tr14x3 RH 2: SG14x16P4 RH
3039.00- V0 X E XXX H XXX
Stroke H customized
Length E (retracted)
7.6
24
44
square22Output spindle
19
12
14.4
Mounting holes ø 4.1 (4x)
No mounting holes
24
hex
6
Y X
* In combination with drive 3130.00 and LogicData control box Compact-3
Technical data
Model 3039.00-V01EXXXHXXX 3039.00-V02EXXXHXXX
Ratio 1:1 1:1
Input hex 6 mm hex 6 mm
Type o spindle Tr14x3 RH SG14x16P4 RH
Travel path 3 mm/rotation 16 mm/rotation
Traverse speed* 7.5 mm/s 40 mm/s
Max. stroke H retracted length -99 mm retracted length -99 mm
Max. lifting force 1200 N 800 N
Required drive torque 1.7 Nm 3.5 Nm
Application example
30
30
View Y View X (Rotation stop)
17.5
2.5
No mounting hole
16.5
9
M6/
17
deep
R 4.5
Table top
Support tube
Input hex 6 mm
Spindle
www.ketterer.de14 153039.75-02/20200415
Lift
ing
Uni
ts
13
-
Bevel gear with spindle unit 3042/ 3043
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Housing made of die-cast zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Ratio 1:1 ▪ Drive torque on gear head for application with several
spindle units: max. 10 Nm ▪ Perfect suitable for electromotive drives ▪ More flexibility through variable number of bevel gears
for deflection of movement ▪ Available in various construction lengths and spindle pitches
Variant key
3042: variants with right rotating spindles3043: variants with left rotating spindles
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 10 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety in- structions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Output spindle
Stroke H customized
Length E (retracted)
40
square22
Y X
20
40
ø 5.5 (4x)
Application example
Support tube
Spindle
Input hex 7 mm
* In combination with motor drives 3143.00-V0X and LogicData control box Compact-3 ** See technical notes
Technical data
Model 3042 3043
Ratio 1:1 1:1
Input hex 7 mm hex 7 mm
Number of bevel wheels max. 3 max. 3
Type of spindle SG12x12P4 RH clockwise
SG12x12P4 RH
counter-clockwise
Travel path 12 mm/rotation 12 mm/rotation
Traverse speed* 24 mm/s 24 mm/s
Max. stroke H retracted length -105 mm retracted length -105mm
Max. lifting force 1200 N 1200 N
Required drive torque 2.6 Nm 2.6 Nm
Max. drive torque gear ahead for several spindle units**
10 Nm 10 Nm
View Y
50
20
50 30
ø 4.75, 17 deep (4x double-sided) for self-tapping screws DIN 7500
50
17.5
2.5
Table top
9
View X(Rotation stop)
16.5
9
M6/
17
deep
R 4.5
input
input
one input
two opposinginputs
Variants:
Output spindle
Output spindle
www.ketterer.de16 173042.75-02/20200423
Lift
ing
Uni
ts
14
-
Bevel gear with spindle unit 3042/ 3043
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.A simple screw fastening enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free ▪ Housing made of die-cast zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Ratio 1:1 ▪ Drive torque on gear head for application with several
spindle units: max. 10 Nm ▪ Perfect suitable for electromotive drives ▪ More flexibility through variable number of bevel gears
for deflection of movement ▪ Available in various construction lengths and spindle pitches
Variant key
3042: variants with right rotating spindles3043: variants with left rotating spindles
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ If several lifting units are being used simultaneously in
the application, note the max. drive torque on gear head of 10 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety in- structions for spindle drives. You will find them at: https://www.ketterer.de/en/downloads/instructions
Output spindle
Stroke H customized
Length E (retracted)
40
square22
Y X
20
40
ø 5.5 (4x)
Application example
Support tube
Spindle
Input hex 7 mm
* In combination with motor drives 3143.00-V0X and LogicData control box Compact-3 ** See technical notes
Technical data
Model 3042 3043
Ratio 1:1 1:1
Input hex 7 mm hex 7 mm
Number of bevel wheels max. 3 max. 3
Type of spindle SG12x12P4 RH clockwise
SG12x12P4 RH
counter-clockwise
Travel path 12 mm/rotation 12 mm/rotation
Traverse speed* 24 mm/s 24 mm/s
Max. stroke H retracted length -105 mm retracted length -105mm
Max. lifting force 1200 N 1200 N
Required drive torque 2.6 Nm 2.6 Nm
Max. drive torque gear ahead for several spindle units**
10 Nm 10 Nm
View Y
50
20
50 30
ø 4.75, 17 deep (4x double-sided) for self-tapping screws DIN 7500
50
17.5
2.5
Table top
9
View X(Rotation stop)
16.5
9
M6/
17
deep
R 4.5
input
input
one input
two opposinginputs
Variants:
Output spindle
Output spindle
www.ketterer.de16 173042.75-02/20200423
Lift
ing
Uni
ts
15
-
Bevel gear with spindle unit 3045
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free▪ Ratio 1:1 and 1:2▪ Drive torque on gear head for application with several spindle units:
max. 5.5 Nm▪ Housing made of glass fi ber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Suitable for manual use as well as for electromotive drives▪ Ideal for the high performance drive 3143.00
Variant key
3045.00-V01: Spindle SG14x16P4 RH and i= 1:1 V02: Spindle Tr14x3 RH and i= 1:1 V03: Spindle Tr14x3 RH and i= 1:2Stroke HXXX and retracted length EXXX are customized
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ Incorrect dimensioning of the guide system can da-
mage the lifting unit: Please note the design and safe-ty instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
▪ Installation note: When fi xing by means of ø 4.1 bore holes, 2 through going M4 screws must be used. The lifting unit should preferably be supported at the top at the front.
▪ Optionally, the gear unit can be fi tted with M8 nuts at the top face, which can be used for fi xing.
* In combination with motor drive 3143.00-200X and LogicData control box Compact-3
Stroke Hcustomized
Length E (retracted)
55
ø 42
square22
35.8
22No mounting hole
ø 4.1 (2x) Mounting hole for trough going screwing
25.6
27
7
35.5
View Y
XY
ø 5 Through hole, no moun-ting hole
Optional:With mounting
nut M8
Technical data
Model 3045.00-V01EXXXHXXX 3045.00-V02EXXXHXXX 3045.00-V03EXXXHXXX
Ratio 1:1 1:1 1:2
Input hex 7 mm hex 7 mm hex 7 mm
Type of spindle SG12x16P4 RH Tr14x3 RH TR14x3 RH
Travel path 16 mm/rotation 3 mm/rotation 6 mm/rotation
Traverse speed* 32 mm/s 6 mm/s 12 mm/s
Max. stroke H retracted length -110 mm retracted length -110 mm retracted length -110 mm
Max. lifting force 1200 N 1200 N 1200 N
Required drive torque 4.5 Nm 1.7 Nm 3.5 Nm
Application example
Input hex 7 mm
Support tube
Spindle
View X(Rotation stop)
16
2.5
17.5
16.5
9
M6/
17
deep
R 4.5
Table top
hex
7
22No mounting hole
www.ketterer.de18 193045.75-02/20200415
Lift
ing
Uni
ts
16
-
Bevel gear with spindle unit 3045
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds.A simple screw fastening and a hexagonal bolt enable a simple system structure and an uncomplicated assembly.
Special features
▪ Maintenance-free▪ Ratio 1:1 and 1:2▪ Drive torque on gear head for application with several spindle units:
max. 5.5 Nm▪ Housing made of glass fi ber reinforced plastic ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Suitable for manual use as well as for electromotive drives▪ Ideal for the high performance drive 3143.00
Variant key
3045.00-V01: Spindle SG14x16P4 RH and i= 1:1 V02: Spindle Tr14x3 RH and i= 1:1 V03: Spindle Tr14x3 RH and i= 1:2Stroke HXXX and retracted length EXXX are customized
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ Incorrect dimensioning of the guide system can da-
mage the lifting unit: Please note the design and safe-ty instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
▪ Installation note: When fi xing by means of ø 4.1 bore holes, 2 through going M4 screws must be used. The lifting unit should preferably be supported at the top at the front.
▪ Optionally, the gear unit can be fi tted with M8 nuts at the top face, which can be used for fi xing.
* In combination with motor drive 3143.00-200X and LogicData control box Compact-3
Stroke Hcustomized
Length E (retracted)
55
ø 42
square22
35.8
22No mounting hole
ø 4.1 (2x) Mounting hole for trough going screwing
25.6
27
7
35.5
View Y
XY
ø 5 Through hole, no moun-ting hole
Optional:With mounting
nut M8
Technical data
Model 3045.00-V01EXXXHXXX 3045.00-V02EXXXHXXX 3045.00-V03EXXXHXXX
Ratio 1:1 1:1 1:2
Input hex 7 mm hex 7 mm hex 7 mm
Type of spindle SG12x16P4 RH Tr14x3 RH TR14x3 RH
Travel path 16 mm/rotation 3 mm/rotation 6 mm/rotation
Traverse speed* 32 mm/s 6 mm/s 12 mm/s
Max. stroke H retracted length -110 mm retracted length -110 mm retracted length -110 mm
Max. lifting force 1200 N 1200 N 1200 N
Required drive torque 4.5 Nm 1.7 Nm 3.5 Nm
Application example
Input hex 7 mm
Support tube
Spindle
View X(Rotation stop)
16
2.5
17.5
16.5
9
M6/
17
deep
R 4.5
Table top
hex
7
22No mounting hole
www.ketterer.de18 193045.75-02/20200415
Lift
ing
Uni
ts
17
-
Bevel gear with spindle unit3070/ 3071
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds. Particularly appropriate as a component for “heavy load solutions” for offi ce furniture and workplace applications. The designs with up to four drive wheels off er broad application opportunities for the lifting unit and high fl exibility in system design.
Special features
▪ Maintenance-free▪ Ratio in direction of spindle 1.83:1▪ Housing made of die-cast-zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Drive torque on gear head for application with several spindle units:
max. 10 Nm▪ Suitable for electromotive drives▪ High fl exibility through variable number of drive wheels for defl ection
of movement▪ Available in diff erent spindle pitches and with customer specifi c
construction lengths
Variant key
3070: variants with right rotating spindles3071: variants with left rotating spindles
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ If several lifting units are being used simultaneously
in the application, note the max. drive torque on gear head of 10 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions* In combination with motor drive 3143.00-V0X and LogicData control box Compact-3
Stroke Hcustomized
Length E (retracted)
square 22
40Y X
ø 5.5 (4x)
ø 4.75 (4x) max.12.6 deep
Input hex 7 mm
Support tube
Spindle
Application example
Technical data
Model 3070 3071
Ratio in direction of spindle 1.83:1 1.83:1
Input hex 7 mm hex 7 mm
Number of Inputs max. 5 max. 5
Type of spindle SG12x12P4 RH clockwise
SG12x12P4 RH
counter-clockwise
Travel path 6.6 mm/rotation 6.6 mm/rotation
Traverse speed* 13 mm/s 13 mm/s
Max. stroke H retracted length -105 mm retracted length -105mm
Max. lifting force 1200 N 1200 N
Required drive torque 2 Nm 2 Nm
Max. drive torque gear head for several spindle units
10 Nm 10 Nm
25
20
hex
7.15
17.5
50
40
30
2.5
Table top
View Y
50
20
3050
ø 4.75/ 17 deep (4x double-sided)for self-tapping screwsDIN 7500
View X(Rotation stop)
16.5
9
M6/
17
deep
R 4.5
one input
two inputs 90°
two opposinginputs
three inputs
four inputs
input
input
input
input
input
output spindle
output spindle
output spindle
output spindle
output spindle
Variants:
www.ketterer.de20 213070.75-02/20200504
Lift
ing
Uni
ts
18
-
Bevel gear with spindle unit3070/ 3071
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fi elds. Particularly appropriate as a component for “heavy load solutions” for offi ce furniture and workplace applications. The designs with up to four drive wheels off er broad application opportunities for the lifting unit and high fl exibility in system design.
Special features
▪ Maintenance-free▪ Ratio in direction of spindle 1.83:1▪ Housing made of die-cast-zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Drive torque on gear head for application with several spindle units:
max. 10 Nm▪ Suitable for electromotive drives▪ High fl exibility through variable number of drive wheels for defl ection
of movement▪ Available in diff erent spindle pitches and with customer specifi c
construction lengths
Variant key
3070: variants with right rotating spindles3071: variants with left rotating spindles
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3 mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.▪ If several lifting units are being used simultaneously
in the application, note the max. drive torque on gear head of 10 Nm!
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions* In combination with motor drive 3143.00-V0X and LogicData control box Compact-3
Stroke Hcustomized
Length E (retracted)
square 22
40Y X
ø 5.5 (4x)
ø 4.75 (4x) max.12.6 deep
Input hex 7 mm
Support tube
Spindle
Application example
Technical data
Model 3070 3071
Ratio in direction of spindle 1.83:1 1.83:1
Input hex 7 mm hex 7 mm
Number of Inputs max. 5 max. 5
Type of spindle SG12x12P4 RH clockwise
SG12x12P4 RH
counter-clockwise
Travel path 6.6 mm/rotation 6.6 mm/rotation
Traverse speed* 13 mm/s 13 mm/s
Max. stroke H retracted length -105 mm retracted length -105mm
Max. lifting force 1200 N 1200 N
Required drive torque 2 Nm 2 Nm
Max. drive torque gear head for several spindle units
10 Nm 10 Nm
25
20
hex
7.15
17.5
50
40
30
2.5
Table top
View Y
50
20
3050
ø 4.75/ 17 deep (4x double-sided)for self-tapping screwsDIN 7500
View X(Rotation stop)
16.5
9
M6/
17
deep
R 4.5
one input
two inputs 90°
two opposinginputs
three inputs
four inputs
input
input
input
input
input
output spindle
output spindle
output spindle
output spindle
output spindle
Variants:
www.ketterer.de20 213070.75-02/20200504
Lift
ing
Uni
ts
19
-
Spindle unit with motoradapter 3130.14
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.
The lifting unit is available in different spindle pitches with customer spe-cific construction lengths and can be combined with most Ketterer drives.
Special features
▪ Ideal for the drives: 3112.00/ 3133.00 / 3133.48 /3130.00 ▪ Available in customized construction lengths ▪ Simple mounting ▪ Connection to the drive hex 9 mm
Variant key
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-lo-cking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide sys-
tem can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
3130.14-V0X..SG14x20P4
3130.14-V1X..SG14x16P4
3130.14-V2X..Tr14x3
with 3133.00 900 N 900 N 900 N
with 3133.48 700 N 900 N 900 N
with 3130.00 (with felt brake)
900 N 900 N 900 N(also a variant
without a brake)
mit 3112.00-1XXX** - 400 N 900 N
Stroke XXX in mmRetracted length XXX in mmMotor flange Variant X: 1: Floating engine mount (support)2: Fixed motor connectionsVariant Type of spindle X: 0: SG14x20P4 RH1: SG14x16P4 RH 2: TR14x3 RH
3130.14- V X E XXX H XXX
* In combination with motor 3133 and LogicData control box Compact-3 ** Max. lifting force is defined by maximum breaking point of the weakest components
Dynamic self-locking limits* of current Ketterer drives with lifting unit 3130.14
* The limits are determined in combination with LogicData control box Compact-3 ** The combination with the lifting units 3130.14-VX2 (variant motor flange 2) is not possible. Special flange on request
* in Verbindung mit Motor 3133 und LogicData Steuerung Compact-3
Technical data
Model 3130.14-V01EXXXHXXX3130.14-V02EXXXHXXX
3130.14-V11EXXXHXXX3130.14-V12EXXXHXXX
3130.14-V21EXXXHXXX 3130.14-V22EXXXHXXX
Type of spindle SG14x20P4 RH SG14x16P4 RH TR14x3 RH
Travel path 20 mm/rotation 16 mm/rotation 3 mm/rotation
Traverse speed* 40 mm/s* 32 mm/s* 6 mm/s*
Max. stroke retracted length -64 mm retracted length -64 mm retracted length -64 mm
Max. lifting force 900 N 900 N** 900 N**
Required drive torque 3.5 Nm 3.4 Nm 1.1 Nm
Variant 3130.14-V02Motor flange 23133.19-0001
3130.14-VX2EXXXHXXX
3130.14-VX1EXXXHXXX
Variant 3130.14-V01Motor flange 1 4115.19-0002
Motor 3133.00-0011
X
www.ketterer.de22 233130.75-04/20200807
Lift
ing
Uni
ts
20
-
Spindle unit with motoradapter 3130.14
Description
Universally applicable lifting unit with bevel gear head for linear drive solutions. Possible applications are height adjustable tables, various adjustment functions for furniture items as well as all manner of linear adjustment in residential, mobile home or industrial fields.
The lifting unit is available in different spindle pitches with customer spe-cific construction lengths and can be combined with most Ketterer drives.
Special features
▪ Ideal for the drives: 3112.00/ 3133.00 / 3133.48 /3130.00 ▪ Available in customized construction lengths ▪ Simple mounting ▪ Connection to the drive hex 9 mm
Variant key
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-lo-cking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide sys-
tem can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
3130.14-V0X..SG14x20P4
3130.14-V1X..SG14x16P4
3130.14-V2X..Tr14x3
with 3133.00 900 N 900 N 900 N
with 3133.48 700 N 900 N 900 N
with 3130.00 (with felt brake)
900 N 900 N 900 N(also a variant
without a brake)
mit 3112.00-1XXX** - 400 N 900 N
Stroke XXX in mmRetracted length XXX in mmMotor flange Variant X: 1: Floating engine mount (support)2: Fixed motor connectionsVariant Type of spindle X: 0: SG14x20P4 RH1: SG14x16P4 RH 2: TR14x3 RH
3130.14- V X E XXX H XXX
* In combination with motor 3133 and LogicData control box Compact-3 ** Max. lifting force is defined by maximum breaking point of the weakest components
Dynamic self-locking limits* of current Ketterer drives with lifting unit 3130.14
* The limits are determined in combination with LogicData control box Compact-3 ** The combination with the lifting units 3130.14-VX2 (variant motor flange 2) is not possible. Special flange on request
* in Verbindung mit Motor 3133 und LogicData Steuerung Compact-3
Technical data
Model 3130.14-V01EXXXHXXX3130.14-V02EXXXHXXX
3130.14-V11EXXXHXXX3130.14-V12EXXXHXXX
3130.14-V21EXXXHXXX 3130.14-V22EXXXHXXX
Type of spindle SG14x20P4 RH SG14x16P4 RH TR14x3 RH
Travel path 20 mm/rotation 16 mm/rotation 3 mm/rotation
Traverse speed* 40 mm/s* 32 mm/s* 6 mm/s*
Max. stroke retracted length -64 mm retracted length -64 mm retracted length -64 mm
Max. lifting force 900 N 900 N** 900 N**
Required drive torque 3.5 Nm 3.4 Nm 1.1 Nm
Variant 3130.14-V02Motor flange 23133.19-0001
3130.14-VX2EXXXHXXX
3130.14-VX1EXXXHXXX
Variant 3130.14-V01Motor flange 1 4115.19-0002
Motor 3133.00-0011
X
www.ketterer.de22 233130.75-04/20200807
Lift
ing
Uni
ts
21
-
Variants3130.14-V01EXXXHXXX3130.14-V11EXXXHXXX3130.14-V21EXXXHXXX
76
ø6.6 (2x)
88
hex 9.1
29
View YMounting fl ange 1
Variants3130.14-V02EXXXHXXX3130.14-V12EXXXHXXX3130.14-V22EXXXHXXX
2957.5
°
8476
hex
9.1
ø62.
5
ø3.4 (2x) mounting holes for screw WN1452 K40x16 tightening torque 1.8 Nm
View YMounting flange 2
View X
E + H
H
X
Mounting fl ange Variant 14115.19-0002
Y
32.72.5
32.7
E Length (retracted)
hex9
.1
ø20
4.5
ø4.8
(2
x)
square 22
Clamping disc SEEGER-KS3(2x)
Head screw galvanizedDIN7380F-M6x12 (2x)
E + H
H
X
2.5
31.7
Mounting fl ange Variant 23133.19-0001
E Length (retracted)
31.7
Y
hex9
.1
www.ketterer.de24 253130.75-04/20200807
Lift
ing
Uni
ts
22
-
Variants3130.14-V01EXXXHXXX3130.14-V11EXXXHXXX3130.14-V21EXXXHXXX
76
ø6.6 (2x)
88
hex 9.1
29
View YMounting fl ange 1
Variants3130.14-V02EXXXHXXX3130.14-V12EXXXHXXX3130.14-V22EXXXHXXX
2957.5
°
8476
hex
9.1
ø62.
5
ø3.4 (2x) mounting holes for screw WN1452 K40x16 tightening torque 1.8 Nm
View YMounting flange 2
View X
E + H
H
X
Mounting fl ange Variant 14115.19-0002
Y
32.72.5
32.7
E Length (retracted)
hex9
.1
ø20
4.5
ø4.8
(2
x)
square 22
Clamping disc SEEGER-KS3(2x)
Head screw galvanizedDIN7380F-M6x12 (2x)
E + H
H
X
2.5
31.7
Mounting fl ange Variant 23133.19-0001
E Length (retracted)
31.7
Y
hex9
.1
www.ketterer.de24 253130.75-04/20200807
Lift
ing
Uni
ts
23
-
Bevel gear with spindle unit 3824
Description
Lifting unit with bevel gear head for linear drive solutions. The gear is ideal for installation in round tubes with inside diameter of 31 mm. Possible applications are height adjustable tables as well as various adjustment functions for other furniture items.
Special features
▪ Maintenance-free ▪ Ratio 1:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Housing made of die-cast-zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Suitable for manual use ▪ Various construction lengths and spindle pitches available
Variant key
Stroke XXX in mmRetracted length XXX in mmVariante Type of spindle X: 1: TR14x3 RH
3824.00- V0 X E XXX H XXX
Retracted length E customized
square22
Technical data
Model 3824.00-V01EXXXHXXX
Ratio 1:1
Input hex 6 mm
Type of spindle TR14x3 RH
Travel path 3 mm/rotation
Traverse speed* 6 mm/ s
Max. stroke retracted length -98 mm
Max. lifting force 1200 N
Required drive torque 2 Nm
Max. drive torque 3 Nm
* In connection with motor 3143.00 - V0X and LogicData control box Compact-3
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/instructions
Output spindle
Stroke H customized
11 14
42.1
X
33.1
M5/6 deepDIN 7984 (2x)
Y
View Y
ø30.7
16.5
9
M6/
17
deep
R 4.5
View X(Rotation stop)
Input hex 6 mm
Support tube
Spindle
Application example
hex 6
17.5
2.5
Table top
www.ketterer.de26 273824.75-02/20200427
Lift
ing
Uni
ts
24
-
Bevel gear with spindle unit 3824
Description
Lifting unit with bevel gear head for linear drive solutions. The gear is ideal for installation in round tubes with inside diameter of 31 mm. Possible applications are height adjustable tables as well as various adjustment functions for other furniture items.
Special features
▪ Maintenance-free ▪ Ratio 1:1 ▪ Drive torque on gear head for application with several spindle units:
max. 3 Nm ▪ Housing made of die-cast-zinc ▪ Hardened steel bevel wheels with robust, reinforced toothing ▪ Suitable for manual use ▪ Various construction lengths and spindle pitches available
Variant key
Stroke XXX in mmRetracted length XXX in mmVariante Type of spindle X: 1: TR14x3 RH
3824.00- V0 X E XXX H XXX
Retracted length E customized
square22
Technical data
Model 3824.00-V01EXXXHXXX
Ratio 1:1
Input hex 6 mm
Type of spindle TR14x3 RH
Travel path 3 mm/rotation
Traverse speed* 6 mm/ s
Max. stroke retracted length -98 mm
Max. lifting force 1200 N
Required drive torque 2 Nm
Max. drive torque 3 Nm
* In connection with motor 3143.00 - V0X and LogicData control box Compact-3
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Incorrect dimensioning of the guide system can damage
the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/instructions
Output spindle
Stroke H customized
11 14
42.1
X
33.1
M5/6 deepDIN 7984 (2x)
Y
View Y
ø30.7
16.5
9
M6/
17
deep
R 4.5
View X(Rotation stop)
Input hex 6 mm
Support tube
Spindle
Application example
hex 6
17.5
2.5
Table top
www.ketterer.de26 273824.75-02/20200427
Lift
ing
Uni
ts
25
-
Synchronous telescopic spindle unit 4115.14
Description
Twofold telescopic lifting unit with bevel gear head for various linear drive solutions. Ideal for electromotive sit-stand workplace applications or wherever an infinite linear adjustment is required at a high speed, maximum stroke with a minimum installation dimension.The lifting unit is available in different construction lengths.
Special features
▪ Double speed through synchronous telescope design ▪ Maximum stroke with minimum installation dimension ▪ Ideal for electromotive drives ▪ Available in different construction lengths ▪ On request the version without central pipe connection is possible
Variant key
Custom middle tube connection XXX in mmRetracted length XXX in mmMotorflange Variant X: 1: Floating engine mount (support)2: Fixed motor connectionsVariant Type of spindle X: 0: SG20x10P2 RH and SG10x10P2 RH
3130.14- 0 X E XXX M XXX
Technical data
Model 4115.14-V02EXXXMXXX 4115.14-V01EXXXMXXX
Type of spindle SG20x10P2 RH SG10x10P2 RH
SG20x10P2 RH SG10x10P2 RH
Travel path 20 mm/rotation synchronous spindle movement
20 mm/rotation synchronous spindle movement
Traverse speed* 40 mm/s* 40 mm/s*
Retracted length E customized min. 476 mm, max. 560 mm
customized min. 476 mm, max. 560 mm
Max. Stroke H** 720 mm 720 mm
Max. lifting force dyn. 900 N stat. 900 N
dyn. 900 N stat. 900 N
Required drive torque 3.3 Nm 3.3 Nm
* In combination with motor 3133 and the LogicData controll box Compact-3
** Stroke length of 720 mm is constant at installation dimension between 476 mm and 560 mm
Motor 3133.00-0011
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Customer specific stroke and installation lengths
available upon request.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
3130.14-VX1EXXXHXXX
Variant 4115.14-V01Motorflange 1 4115.19-0002
Variant 4115.14-V02Motorflange 23133.19-0001
3130.14-VX2EXXXHXXX
V
www.ketterer.de28 294115.75-02/20200513
Lift
ing
Uni
ts
26
-
Synchronous telescopic spindle unit 4115.14
Description
Twofold telescopic lifting unit with bevel gear head for various linear drive solutions. Ideal for electromotive sit-stand workplace applications or wherever an infinite linear adjustment is required at a high speed, maximum stroke with a minimum installation dimension.The lifting unit is available in different construction lengths.
Special features
▪ Double speed through synchronous telescope design ▪ Maximum stroke with minimum installation dimension ▪ Ideal for electromotive drives ▪ Available in different construction lengths ▪ On request the version without central pipe connection is possible
Variant key
Custom middle tube connection XXX in mmRetracted length XXX in mmMotorflange Variant X: 1: Floating engine mount (support)2: Fixed motor connectionsVariant Type of spindle X: 0: SG20x10P2 RH and SG10x10P2 RH
3130.14- 0 X E XXX M XXX
Technical data
Model 4115.14-V02EXXXMXXX 4115.14-V01EXXXMXXX
Type of spindle SG20x10P2 RH SG10x10P2 RH
SG20x10P2 RH SG10x10P2 RH
Travel path 20 mm/rotation synchronous spindle movement
20 mm/rotation synchronous spindle movement
Traverse speed* 40 mm/s* 40 mm/s*
Retracted length E customized min. 476 mm, max. 560 mm
customized min. 476 mm, max. 560 mm
Max. Stroke H** 720 mm 720 mm
Max. lifting force dyn. 900 N stat. 900 N
dyn. 900 N stat. 900 N
Required drive torque 3.3 Nm 3.3 Nm
* In combination with motor 3133 and the LogicData controll box Compact-3
** Stroke length of 720 mm is constant at installation dimension between 476 mm and 560 mm
Motor 3133.00-0011
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking effect in the application.
▪ The lifting unit is only pressure loadable. ▪ Customer specific stroke and installation lengths
available upon request.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will find them at: https:// www.ketterer.de/en/downloads/ instructions
3130.14-VX1EXXXHXXX
Variant 4115.14-V01Motorflange 1 4115.19-0002
Variant 4115.14-V02Motorflange 23133.19-0001
3130.14-VX2EXXXHXXX
V
www.ketterer.de28 294115.75-02/20200513
Lift
ing
Uni
ts
27
-
View X
45°
ø20
45°
ø3.4 (2
x)
Mounting holes for screwsWN1452 K40x16tightening torque 1.8 Nm
View Z
90 76ø5
.8 (2
x)
29
57.5° (2x)
ø62.
5
ø25
Attention!Pin-position to borne ø 10 must be conside-red
4.5
ø4.9
ø7
ø10
76
ø6.6 (2x)
88
hex 9.1
View Y
29
Variants 4115.14-V02EXXXMXXXVariants 4115.14-V01EXXXMXXX
Mounting flange 4115.19-0002
E + 2 x H1
Y
H1 H1
X
Synchronous movement stroke 1 = stroke 2
hex
9.1
32.72.5 Connection central tube
E
hex
9.1
Connection central tube32.7
2.5
E
Head screw galvanized DIN7380F-M6x12 (2x)
Clamping disc SEEGER-KS3(2x)
Synchronous movement stroke 1 = stroke 2
E + 2 x H1
Mounting flange 3133.19-0001
H1 H1
XZ
www.ketterer.de30 314115.75-02/20200513
Lift
ing
Uni
ts
28
-
View X
45°
ø20
45°
ø3.4 (2
x)
Mounting holes for screwsWN1452 K40x16tightening torque 1.8 Nm
View Z
90 76ø5
.8 (2
x)
29
57.5° (2x)
ø62.
5
ø25
Attention!Pin-position to borne ø 10 must be conside-red
4.5
ø4.9
ø7
ø10
76
ø6.6 (2x)
88
hex 9.1
View Y
29
Variants 4115.14-V02EXXXMXXXVariants 4115.14-V01EXXXMXXX
Mounting flange 4115.19-0002
E + 2 x H1
Y
H1 H1
X
Synchronous movement stroke 1 = stroke 2
hex
9.1
32.72.5 Connection central tube
E
hex
9.1
Connection central tube32.7
2.5
E
Head screw galvanized DIN7380F-M6x12 (2x)
Clamping disc SEEGER-KS3(2x)
Synchronous movement stroke 1 = stroke 2
E + 2 x H1
Mounting flange 3133.19-0001
H1 H1
XZ
www.ketterer.de30 314115.75-02/20200513
Lift
ing
Uni
ts
29
-
Bevel gear with syncronous telescopic-spindle 4115.00
Description
Twofold telescopic lifting unit with bevel gear head for various linear drive solutions. Ideal for electromotive sit-stand workplace applications or wherever an infi nite linear adjustment is required at a high speed, maximum stroke with a minimum installation dimension.The lifting unit is available in customized construction lengths.
Special features
▪ Double speed through synchronous telescope design▪ Maximum stroke with minimum installation dimension▪ With gear head 3039 or 3045▪ Ratio 1:1▪ Drive torque on gear head : max. 4 Nm or 5.5 Nm▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Ideal for electromotive drives▪ Available in diff erent construction lengths▪ On request the version without central pipe connection is possible
* In connection with motor 3143.00 - V0X and LogicData control box Compact-3
Technical data
Model 4115.00-V01EXXXMXXX 4115.00-V02EXXXMXXX
Gear head 3039 3045
Ratio i= 1:1 i= 1:1
Input hex 6 mm hex 7 mm
Type of spindle SG20x10P2 RH SG10x10P2 RH
SG20x10P2 RH
SG10x10P2 RH
Travel path 20 mm/rotation synchronous spindle movement
20 mm/rotation synchronous spindle movement
Traverse speed* 40 mm/s 40 mm/s
Retracted length E customized min. 485 mm, max. 560 mm
customized min. 485 mm, max. 560 mm
Stroke* 656 mm 656 mm
Max. lifting force dynamic 800 Nstatic 900 N
dynamic 900 Nstatic 900 N
Required drive torque 3.5 Nm 3.5 Nm
Max. drive torque gear head with several spindle units
4 Nm 5.5 Nm
4115.00-V01EXXXHXXX
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
hex
6.25
View Z
ø20
45° 45°
ø3.4 (2x)
ø10
ø25
ø29
4.5
ø4.9
7
View Y
4115.00-V02EXXXHXXX
hex
7
12
H244
14.4
7.6 ø4.1 (4x)
7.6
E=2xH1
M
Z Y
H1
55
H2
M
E=2xH1
ø4.1 (2x through going)7
2722
Z Y
H1
Variante V01 Variante V02
30
30
ø42
35.8
35.8
www.ketterer.de28 294115.75-04/20200427
Lift
ing
Uni
ts
30
-
Bevel gear with syncronous telescopic-spindle 4115.00
Description
Twofold telescopic lifting unit with bevel gear head for various linear drive solutions. Ideal for electromotive sit-stand workplace applications or wherever an infi nite linear adjustment is required at a high speed, maximum stroke with a minimum installation dimension.The lifting unit is available in customized construction lengths.
Special features
▪ Double speed through synchronous telescope design▪ Maximum stroke with minimum installation dimension▪ With gear head 3039 or 3045▪ Ratio 1:1▪ Drive torque on gear head : max. 4 Nm or 5.5 Nm▪ Hardened steel bevel wheels with robust, reinforced toothing▪ Ideal for electromotive drives▪ Available in diff erent construction lengths▪ On request the version without central pipe connection is possible
* In connection with motor 3143.00 - V0X and LogicData control box Compact-3
Technical data
Model 4115.00-V01EXXXMXXX 4115.00-V02EXXXMXXX
Gear head 3039 3045
Ratio i= 1:1 i= 1:1
Input hex 6 mm hex 7 mm
Type of spindle SG20x10P2 RH SG10x10P2 RH
SG20x10P2 RH
SG10x10P2 RH
Travel path 20 mm/rotation synchronous spindle movement
20 mm/rotation synchronous spindle movement
Traverse speed* 40 mm/s 40 mm/s
Retracted length E customized min. 485 mm, max. 560 mm
customized min. 485 mm, max. 560 mm
Stroke* 656 mm 656 mm
Max. lifting force dynamic 800 Nstatic 900 N
dynamic 900 Nstatic 900 N
Required drive torque 3.5 Nm 3.5 Nm
Max. drive torque gear head with several spindle units
4 Nm 5.5 Nm
4115.00-V01EXXXHXXX
Technical notes
▪ The lifting units must be protected against lateral forces by a separate guide system.
▪ Attention: The spindle systems with a spindle pitch > 3mm may not be self-locking. Check the self-locking eff ect in the application.
▪ The lifting unit is only pressure loadable.
▪ Incorrect dimensioning of the guide system can damage the lifting unit: Please note the design and safety instructions for spindle drives. You will fi nd them at: https:// www.ketterer.de/en/downloads/instructions
hex
6.25
View Z
ø20
45° 45°
ø3.4 (2x)
ø10
ø25
ø29
4.5
ø4.9
7
View Y
4115.00-V02EXXXHXXX
hex
7
12
H244
14.4
7.6 ø4.1 (4x)
7.6
E=2xH1
M
Z Y
H1
55
H2
M
E=2xH1
ø4.1 (2x through going)7
2722
Z Y
H1
Variante V01 Variante V02
30
30
ø42
35.8
35.8
www.ketterer.de28 294115.75-04/20200427
Lift
ing
Uni
ts
31
-
Brake unit 3052.09Description
Very slim, compact brake unit for manually adjustable applications. Can be used fl exibly, in combination with lifting gears.
Special features
▪ Synthetic gear housing▪ Simple mounting▪ Input and output can be supplied in various lengths,
based on customer requirements
Variant key
Length Input side: XXX in mmLength Output side: XXX in mm Performance Input side: 02 Aluminium sleeve with Inner hex 6 mm 03 Hexagonal shafts
3052.09 V XX A XXX B XXX
3052.09-V02AXXXBXXX
3052.09-V03AXXXBXXX
Installation lenght E = (A + B) + 26,2
Installation lenght E = (A + B) + 26,2
square 33 B A
B A
6he
x 12
6
hex
6h
ex
Output Input
Output Input
26,2
26,2
36
45°
4,1 (2x)
6,2
5he
x
Technical data
Model 3052.09-V02AXXXBXXX 3052.09-V03AXXXBXXX
Input Inner hex 6 mmLength A customer specifi c
Hex 6 mm
Length A customer specifi c
Output Hex 6 mmLength B customer specifi c
Hex 6 mm
Length B customer specifi c
Max. holding torque 10 Nm 10 Nm
Max. output torque 4 Nm 4 Nm
Application Manual drives Manual drives
www.ketterer.de1 23052.09.75-04/20181130
Acce
ssor
ies
32
-
Brake unit 3052.09Description
Very slim, compact brake unit for manually adjustable applications. Can be used fl exibly, in combination with lifting gears.
Special features
▪ Synthetic gear housing▪ Simple mounting▪ Input and output can be supplied in various lengths,
based on customer requirements
Variant key
Length Input side: XXX in mmLength Output side: XXX in mm Performance Input side: 02 Aluminium sleeve with Inner hex 6 mm 03 Hexagonal shafts
3052.09 V XX A XXX B XXX
3052.09-V02AXXXBXXX
3052.09-V03AXXXBXXX
Installation lenght E = (A + B) + 26,2
Installation lenght E = (A + B) + 26,2
square 33 B A
B A
6he
x 12
6
hex
6h
ex
Output Input
Output Input
26,2
26,2
36
45°
4,1 (2x)
6,2
5he
x
Technical data
Model 3052.09-V02AXXXBXXX 3052.09-V03AXXXBXXX
Input Inner hex 6 mmLength A customer specifi c
Hex 6 mm
Length A customer specifi c
Output Hex 6 mmLength B customer specifi c
Hex 6 mm
Length B customer specifi c
Max. holding torque 10 Nm 10 Nm
Max. output torque 4 Nm 4 Nm
Application Manual drives Manual drives
www.ketterer.de1 23052.09.75-04/20181130
Acce
ssor
ies
33
-
Crank handles 5102/5159Description
Wire-flexured cranks in several measurements with crank grips made of synthetic material.
Special features
▪ Made of steel or stainless steel ▪ Customized production possible ▪ Customer spezific solutions can be realized rapidly
at a competitive price, by use of a production method which does not depend on specific tools or designs
b 1x45°B
1x45°
ER5
D
R5
44
A
Grip 5120.01-02Grip 5101.11-01
b
B
0.5x45°
E R10
D
R10
88
A
Crank-handles with grip 5101.11-01Item-Number A B D E b Material
5108.00-00 100 Hex 9 mm Ø10 62 15 Stainless steel
5104.00-00 110 Hex 9 mm Ø10 60 15 Stainless steel
5109.00-00 110 Inner hex 6 mm Ø10 60 12 Stainless steel
5102.00-00 110 Hex 9 mm Ø10 42 16 Stainless steel
Crank-handles with grip 5120.01-02Item-Number A B D E b Material
5147.00-00 65 Hex 5 mm Ø7 53 15 Stainless steel
5132.00-00 90 Hex 5 mm Ø7 110 15 Stainless steel
5153.00-00 90 Hex 5 mm Ø7 63 15 Stainless steel
5156.00-13 90 Hex 6 mm Ø7 33 20 Steel
5187.00-0003 110 Inner hex 6 mm Ø7 325 300
5183.00-0000 90 Hex 6 mm Ø7 200 20 Stainless steel
5156.00-0011 115 Inner hex 6 mm Ø7/ Ø12 503 480
5156.00-10 90 Hex 6 mm Ø7 33 20 Steel
5156.00-00 90 Hex 6 mm Ø7 33 20 Stainless steel
5159.00-00 90 Hex 6 mm Ø7 60 20 Stainless steel
5157.00-00 90 Hex 6 mm Ø7 85 20 Stainless steel
5163.00-00 90 Hex 6 mm Ø7 116.5 20 Stainless steel
5165.00-00 105 Hex 6 mm Ø7 85.5 12 Stainless steel
5158.00-00 150 Hex 6 mm Ø7 33 20 Stainless steel
5133.00-00 90 Hex 7 mm Ø8 62 15 Stainless steel
Crank-handles obliqueItem-Number A B D E b Material
5121.00-00 (Angle = 10°) 134 Hex 6 mm Hex 6 mm 64 64 Steel
www.ketterer.de1 25108.75-02/20181031
Acce
ssor
ies
34
-
Crank handles 5102/5159Description
Wire-flexured cranks in several measurements with crank grips made of synthetic material.
Special features
▪ Made of steel or stainless steel ▪ Customized production possible ▪ Customer spezific solutions can be realized rapidly
at a competitive price, by use of a production method which does not depend on specific tools or designs
b 1x45°B
1x45°
ER5
D
R5
44
A
Grip 5120.01-02Grip 5101.11-01
b
B
0.5x45°
E R10
D
R10
88
A
Crank-handles with grip 5101.11-01Item-Number A B D E b Material
5108.00-00 100 Hex 9 mm Ø10 62 15 Stainless steel
5104.00-00 110 Hex 9 mm Ø10 60 15 Stainless steel
5109.00-00 110 Inner hex 6 mm Ø10 60 12 Stainless steel
5102.00-00 110 Hex 9 mm Ø10 42 16 Stainless steel
Crank-handles with grip 5120.01-02Item-Number A B D E b Material
5147.00-00 65 Hex 5 mm Ø7 53 15 Stainless steel
5132.00-00 90 Hex 5 mm Ø7 110 15 Stainless steel
5153.00-00 90 Hex 5 mm Ø7 63 15 Stainless steel
5156.00-13 90 Hex 6 mm Ø7 33 20 Steel
5187.00-0003 110 Inner hex 6 mm Ø7 325 300
5183.00-0000 90 Hex 6 mm Ø7 200 20 Stainless steel
5156.00-0011 115 Inner hex 6 mm Ø7/ Ø12 503 480
5156.00-10 90 Hex 6 mm Ø7 33 20 Steel
5156.00-00 90 Hex 6 mm Ø7 33 20 Stainless steel
5159.00-00 90 Hex 6 mm Ø7 60 20 Stainless steel
5157.00-00 90 Hex 6 mm Ø7 85 20 Stainless steel
5163.00-00 90 Hex 6 mm Ø7 116.5 20 Stainless steel
5165.00-00 105 Hex 6 mm Ø7 85.5 12 Stainless steel
5158.00-00 150 Hex 6 mm Ø7 33 20 Stainless steel
5133.00-00 90 Hex 7 mm Ø8 62 15 Stainless steel
Crank-handles obliqueItem-Number A B D E b Material
5121.00-00 (Angle = 10°) 134 Hex 6 mm Hex 6 mm 64 64 Steel
www.ketterer.de1 25108.75-02/20181031
Acce
ssor
ies
35
-
Crank-handle 5180Description
Crank-handle grip and the crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ On request, the type and length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specification
▪ On request, an own logotype is possible
b2515
Ø10
a11
0
90
Application example
Technical data
Model 5180 Standard 5180 Customer specific
Measure a Hex 9 mm On request
Measure b 60 mm On request
Type of hexagonal bolt Hardened/Blank On request
Colour (crank body and grip) Black On request
Logotype Without Your logotype
www.ketterer.de1 25180.75-02/20181212
Acce
ssor
ies
36
-
Crank-handle 5180Description
Crank-handle grip and the crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ On request, the type and length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specification
▪ On request, an own logotype is possible
b2515
Ø10
a11
0
90
Application example
Technical data
Model 5180 Standard 5180 Customer specific
Measure a Hex 9 mm On request
Measure b 60 mm On request
Type of hexagonal bolt Hardened/Blank On request
Colour (crank body and grip) Black On request
Logotype Without Your logotype
www.ketterer.de1 25180.75-02/20181212
Acce
ssor
ies
37
-
Crank-handle 5186Description
Crank-handle grip and crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ Can be folded by 90°. ▪ On request, the type and the length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specifications
▪ On request, an own logotype is possible
25 31 214.5
65
110
hex
6 m
mø1
2
90° folding
crank holder
crank
clamping ring
Clamping ringOrder number 5186.10-0001
ø24
6
ø12
ø 4,4 (2x)
48
AA
4541
A-A
3733292532
28 24 20 16 12
Crank holderOrder number 5186.19-0000
Technical notes
▪ Crank holder, made of black synthetic material, for a 12 mm diameter crank shaft. The holder can be adjusted from a height of 12 mm up to 45 mm.
▪ Clamping ring, made of black synthetic material, for shaft with diameter 12 mm. You need 2 clamping rings to secure the crank shaft on the crank holder. The fixing nut is enclosed.
Possible adjustment heights
Technical data
Model 5186
Crank extension 110 mm
Type of hexagonal bolt Inner hex 6 mm
Dynamic torque 2 Nm
Application example
www.ketterer.de1 25186.75-02/20190425
Acce
ssor
ies
38
-
Crank-handle 5186Description
Crank-handle grip and crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ Can be folded by 90°. ▪ On request, the type and the length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specifications
▪ On request, an own logotype is possible
25 31 214.5
65
110
hex
6 m
mø1
2
90° folding
crank holder
crank
clamping ring
Clamping ringOrder number 5186.10-0001
ø24
6
ø12
ø 4,4 (2x)
48
AA
4541
A-A
3733292532
28 24 20 16 12
Crank holderOrder number 5186.19-0000
Technical notes
▪ Crank holder, made of black synthetic material, for a 12 mm diameter crank shaft. The holder can be adjusted from a height of 12 mm up to 45 mm.
▪ Clamping ring, made of black synthetic material, for shaft with diameter 12 mm. You need 2 clamping rings to secure the crank shaft on the crank holder. The fixing nut is enclosed.
Possible adjustment heights
Technical data
Model 5186
Crank extension 110 mm
Type of hexagonal bolt Inner hex 6 mm
Dynamic torque 2 Nm
Application example
www.ketterer.de1 25186.75-02/20190425
Acce
ssor
ies
39
-
Crank-handle 5187Description
Crank-handle grip and crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ On request, the type and the length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specifications
▪ On request, an own logotype is possible
Variant key
110
65
ø23
25
hex
6 m
m/ h
ex7
mm
A 20
ø12
aluminium profile tube
(optional)lettering possible
Length of crank extension: XXX in mm Type of profile tube: 01 Inner hex 6 mm 02 Inner hex 7 mm
5187.00 V XX A XXX
Technical data
Model 5187.00-V01AXXX 5187.00-V02AXXX
Crank extension Customer specific Customer specific
Type of profile tube Inner hex 6 mm Inner hex 6 mm
Material Synthetic crank body and handle Synthetic crank body and handle
Length A Customer specific Customer specific
Colour Black (more colours available on request)
Black
(more colours available on request)
Application example
www.ketterer.de1 25187.75-02/20181130
Acce
ssor
ies
40
-
Crank-handle 5187Description
Crank-handle grip and crank extension are made of glass-fibre reinforced synthetic material.
Special features
▪ Modern design ▪ On request, the type and the length of the hexagonal bolt
as well as the colour of the crank body can be produced to customer specifications
▪ On request, an own logotype is possible
Variant key
110
65
ø23
25
hex
6 m
m/ h
ex7
mm
A 20
ø12
aluminium profile tube
(optional)lettering possible
Length of crank extension: XXX in mm Type of profile tube: 01 Inner hex 6 mm 02 Inner hex 7 mm
5187.00 V XX A XXX
Technical data
Model 5187.00-V01AXXX 5187.00-V02AXXX
Crank extension Customer specific Customer specific
Type of profile tube Inner hex 6 mm Inner hex 6 mm
Material Synthetic crank body and handle Synthetic crank body and handle
Le