Herbicide Recommendations for LibertyLink Corn

Weed Control Program

1st Post Application (Emergence to 10 days or when weeds are no more than 3 to 4 inches)

2nd Post Application

Post corn emergence Liberty at 22 fl oz/Aplus residual herbicide

If needed, Liberty at 22 fl oz/A or, if sequential applications planned, apply 10 days after fi rst application

1. Start Clean. Start with a clean, weed-free fi eld by using an effective burndown application or conventional tillage.

2. Stay Clean. Be aggressive with early season weed management to avoid yield loss and weed escapes. Residual herbicides applied at burndown, pre-emergence and/or tankmixed in the fi rst post application help ensure optimal weed management, particularly if environmental conditions delay timely post applications. Consider expected weed species and populations as well as environmental variables when selecting a residual herbicide.

4. Additives: Ammonium sulfate (AMS) can be used at a rate of 1.5 lb/A to 3 lb/A.

5. Maximum Seasonal Use Rate: 44 fl oz/A per growing season.

6. Additional Use Directions:a. Can be applied broadcast to LibertyLink corn from emergence to V7 growth stage (seven fully developed leaf collars).b. Should be applied when winds are less than 10 mph, and not during periods of temperature inversions.c. Do not apply within 60 days of harvesting corn forage or 70 days of harvesting corn grain and corn fodder.d. Consult product label for full use directions, tankmix partners and restrictions.

APPLICATION GUIDELINESFor LibertyLink® Corn

Liberty® is a nonselective contact herbicide that provides postemergence control of broadleaf weeds and grasses, including weeds resistant to glyphosate and multiple herbicide classes. Liberty is a Group 10 herbicide mode of action.*

Available in all LibertyLink® corn hybrids, including all Herculex®, SmartStax™, Agrisure® with corn borer protection, as well as in-bag refuge products Genuity® SmartStax RIB Complete™ and Refuge Advanced® powered by SmartStax, or as a single trait in hybrids used for refuge acres.

*Herbicide mode of action groups designated by the Weed Science Society of America.

Bayer CropScience LP, 2 T.W. Alexander Drive, Research Triangle Park, NC 27709. Always read and follow label instructions. Bayer, the Bayer Cross, Liberty, LibertyLink and the Water Droplet Design are registered trademarks of Bayer. Liberty is not registered in all states. AirMix, TurboDrop and TwinFan are trademarks of Agrotop. Herculex and the HX logo are trademarks of Dow AgroSciences LLC. Refuge Advanced is a trademark of E.I. du Pont de Nemours & Co. Albuz, Guardian, Total Range and Variable Pressure are trademarks of Hypro LLC. Genuity and design, RIB Complete, and SmartStax are trademarks of Monsanto Technology LLC. TeeJet, Turbo TwinJet, VisiFlo and XR TeeJet are trademarks of Spraying Systems. VariTarget is a trademark of SprayTarget. Agrisure is a trademark of a Syngenta Group Company. For additional product information call toll-free 1-866-99-BAYER (1-866-992-2937) or visit our website at www.BayerCropScience.usCR0212LIBERTA010V02R0

Mixing Instructions

1. Start with properly calibrated and cleaned equipment.

2. Fill spray tank half full with water.

3. Start agitation.

4. Add AMS to spray tank.

5. Add tankmix partner.

6. Complete filling spray tank with water.

7. Add Liberty and continue agitation.

8. If foaming occurs, use a silicone- based antifoam agent.

For more information on Liberty, talk to your retailer or Bayer CropScience sales representative or visit BayerCropScience.us

How to Spray

As a contact herbicide, following application guidelines is important to ensure adequate coverage and maximum weed control.

• Use nozzles and pressure that generate medium-size (250 microns to 350 microns) spray droplets.

• Nozzle recommendations:

- Spraying Systems: TeeJet® VisiFlo® Flat, XR TeeJet Extended Range Flat or Turbo TwinJet® Flat spray tips

- Greenleaf Technologies: TurboDrop® XL, TurboDrop TwinFan® or AirMix® spray tips

- Hypro: Guardian™, Variable Pressure™, Total Range™ or Albuz® AXI spray tips

- Delavan AgSpray: VariTarget™

Refer to nozzle manufacturers’ catalogs, tech sheets or websites for additional guidance.

• Apply Liberty at 15 GPA of water; increase water if dense weed canopy exists.

• Apply at ground speed of less than 15 mph to attain adequate coverage.

• Do not apply when wind speeds are greater than 10 mph.

• Add tankmix partner, if needed.

Use Directions

Rate •22floz/A

Application Window •UptoV7growthstage

Spray Volume •15GPAofwater •Ifdenseweedcanopy,increasewatervolume

Droplet Size •Medium(250micronsto350microns)

Rainfast •4hours

Wind Speed •Lessthan10mph

Pre-harvest Interval •60daysofharvestingcornforage •70daysofharvestingcorngrainandfodder

IMPORTANT: This bulletin is not intended to provide adequate information for use of this product. Read the label before using this product. Observe all label directions and precautions while using this product.