LG Washing Machine MFL49491523(3)

7/28/2019 LG Washing Machine MFL49491523(3)

1/32

Washing MachineOWNER'S MANUAL

F1422TD(1~9)

F1222TD(1~9)F1022TD(1~9)

Thank you for buying aLG Fully Automatic Washing machine.Please read your owner's manual carefully, it providesinstructions on safe installation, use and maintenance.Retain it for future reference.Record the model and serial numbers of your washing machine.


2/32

2

roduct FeaturesP

ontentsCWarnings....................................................................................3

Specifications.............................................................................4Installation..................................................................................5

Care before washing................................................................11

Adding detergent .....................................................................12

Function ...................................................................................14

How to use washer ..................................................................15

Maintenance ............................................................................22

Troubleshooting guide .............................................................26Terms of Warranty ...................................................................29

, ,

Protection against creases

With the alternate rotation of the drum, creasing in the laundry isminimized.

Built-in HeaterInternal heater automatically heats the water to the besttemperature on selected cycles.

More economical by Intelligent Wash SystemIntelligent Wash System detects the amount of load and watertemperature, and then determines the optimum water level and

washing time to minimize energy and water consumption.

Child LockThe Child lock prevents children from pressing any button tochange the settings during operation.

Low noise speed control systemBy sensing the amount of load and balance, it evenly distributesload to minimize the spinning noise level.

Direct Drive SystemThe advanced Brushless DC motor directly drives the drum withoutbelt and pulley.


3/32

3

arningsWFor your safety, the information in this manual must be followed to minimizethe risk of fire or explosion, electric shock, or to prevent property damage,personal injury, or loss of life.

!

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE

WARNING!

Do not push down the door excessively, when washer door open.

This could topple over the washer.

Before installation, check exterior damages. If it has,do not install.

Do not install or store the washer where it willbe exposed to the weather.

Do not tamper with controls.

Do not repair or replace any part of the washeror attempt any servicing unless specificallyrecommended in the user-maintenance instructionsor published user-repair instructions that youunderstand and have the skills to carry out.

Keep the area underneath and around yourappliances free of combustible materials such aslint, paper, rags, chemicals, etc.

Close supervision is necessary if this appliance isused by or near children. Do not allow children toplay on, with, or inside this or any other appliance.

Keep small animals away from the appliance. Do not leave the washer door open.

An open door could entice children to hang on thedoor or crawl inside the washer.

Never reach into washer while it is moving. Waituntil the drum has completely stopped.

The laundry process can reduce the flame retardantof fabrics.

To avoid such a result, carefully follow the garmentmanufacturers wash and care instructions.

Do not wash or dry articles that have been cleanedin, washed in, soaked in, or spotted with

combustible or explosive substances (such as wax,oil, paint, gasoline, degreasers, dry-cleaningsolvents, kerosene, etc.) which may ignite orexplode. Oil may remain in the tub after a wholecycle resulting in fire during drying. So, do not load

oiled clothes. Do not slam the washer door closed or try to forcethe door open when locked. This could result indamage to the washer.

When the machine runs high temperature, the frontdoor may be very hot. Dont touch it.

To minimize the possibility of electric shock, unplugthis appliance from the power supply or disconnectthe washer at the household distribution panel byremoving the fuse or switching off the circuit breakerbefore attempting any maintenance or cleaning.

When unplugging power cord, do not pull out bygrasping the cord. Otherwise, the power cord maybe damaged.

Never attempt to operate this appliance if it isdamaged, malfunctioning, partially disassembled, orhas missing or broken parts, including a damagedcord or plug.

Before discarding an old machine unplug it. Renderthe plug useless. Cut off the cable directly behindthe appliance to prevent misuse.

When a product was under water, Please callservice center. The risk of electric shock and fire.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path

of least resistance for electric current. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.

The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.

Do not use an adapter or otherwise defeat the grounding plug. If you dont have the proper outlet, consult an electrician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING : To reduce the risk of fire, electric shock, or injury to persons when usingthe washer, follow basic precautions, including the following:

SAVE THESE INSTRUCTIONS

WARNING : Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check witha qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify

the plug provided with the appliance - if it does not fit the outlet, have a proper outlet installed by a qualified electrician.


4/32

4

pecificationsS

SpannerInlet hose(1EA)

IAccessories

I Name : Front loading washing machine

I Power supply : 220-240V~,50Hz

I Size : 600mm(W) 550mm(D) 850mm(H)

IWeight/Max.Watt : 58kg / 2100W

IWash capacity : 8kg

IWater consumption : 56(7/ kg)

I Permissible water pressure : 0.3-10kgf/ (30-1000kPa)

I Spin speed : No Spin/400/800/1400 [F1422TD(1~9)]

No Spin/400/800/1200 [F1222TD(1~9)]

No Spin/400/800/1000 [F1022TD(1~9)]

The appearance and specifications may be varied without notice to raise the units quality.


5/32

5

nstallationI

1. To prevent internal damage duringtransport, the special 4 bolts arelocked. Before operating the washer,removethe bolts along with the rubber bungs.

If they are not removed, it may causeheavy vibration, noise and malfunction.

3. Take out the 4 bolts along with therubber bungs by slightly twisting thebung. Keep the 4 bolts and thespanner for future use.

Whenever the appliance is transported,the transit bolts must be refitted.

The appliance is fitted with transit bolts to prevent internal damage during transport.

Packing and all transit bolts mustbe removed before using the

washer.

When unpacking the base, besure to remove the additional

packing support in the middle

of the base packing.

2. Unscrew the 4 bolts withthe spanner supplied.

4. Close the holes with the caps supplied.

Transit bolts

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.

Properly ground washer to conform with all governing codes and ordinances.

The base opening must not be obstructed by carpeting when the washing machine is installed on acarpeted floor.

In countries where there are areas which may be subject to infestation by cockroaches or other vermin,

pay particular attention to keeping the appliance and its surroundings in clean condition at all times.

Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance

guarantee.

Removing transit bolts

Base Packing

Washer

Packing Support(Packing support may notbe used depending onmodels.)


6/32

6

nstallationI

Laundry

Tub

Washer

approx.

2cm

Drain Hose

Installation place requirement

BS Plug Safety Details (For U.K. User)

IMPORTANTTHE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:GREEN AND YELLOW: EARTH

BLUE: NEUTRALBROWN: LIVE

This appliance must be earthed

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifyingthe terminals in your plug, proceed as follows:The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter Eor by the earth symbol or coloured Green or Green and Yellow.The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.

If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.

Green and Yellow(Earth)

Brown(Live)

Blue(Neutral)

Cordgrip

Fuse

E

L

N

PositioningInstall the washer on a flat hard floor.Make sure that air circulation around the washer is not impeded by carpets,rug etc.

Never try to correct any unevenness in the floor with pieces of wood, cardboard or similarmaterials under the washer.

If it is impossible to avoid positioning the washer next to a gas cooker or coal burningstove,an insulating(85x60cm) covered with aluminum foil on the side facing the cooker orstove,must be inserted between the two appliance.

The washer must not be installed in rooms where the temperature can drop below 0C.

Please ensure that when the washer is installed, it is easily accessible for the engineer in

the event of a breakdown. With the washer installed adjust all four feet using the transit bolt spanner provided

ensuring the appliance is stable, and a clearance of approximately 20mm is left betweenthe top of the washer and the underside of the work-top.

Level floor :

Allowable slope under entire washer is 1Power outlet :Must be within 1.5 meters of either side of location ofwasher. Do not overload the outlet with more than oneappliance.Additional Clearance :For wall, door and floor modeling is required.(10cm : rear /2cm:right & left side)Do not place or store laundry products on top of washer atany times.They can damage the finish or controls.


7/32

7

nstallationI

Water supply pressure must be between 30kPa and 1000kPa(0.3~10kgf/cm2)

Dont strip or crossthread when connecting Inlet hose to the valve.

If the water supply pressure is more than 1000kPa, a decompression deviceshould be installed.

Two rubber seals are supplied with the water inlet hoses. They areused for preventing water leaks.

Make sure the connection to taps is tight enough.

Periodically check the condition of the hose and replace the hose ifnecessary.

Make sure that there is no kink on the hose and that it is not crushed.

IWashing Machine is to be connected to the water mains using new hose-sets and old hose-sets should

not be used.I Connecting water supply hose

1. Do not use an extension cord or double adapter.

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarlyqualified person in order to avoid a hazard.

3. Always unplug the machine and turn off the water supply after use.4. Connect the machine to an earthed socket in accordance with current wiring regulations.5. The appliance must be positioned so that the plug is easily accessible.

Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by

inexperienced persons may cause injury or serious malfunctioning. Contact your local service center Do not install your washing machine in rooms where temperature below freezing may occur. Frozen hoses may burst

under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing

machine at room temperature for a few hours before putting it into operation.

I Electrical connection

CAUTION concerning the Power CordMost appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuitwhich powers only that appliance and has no additional outlets or branch circuits. Check thespecification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditionscould result in electric shock or fire. Periodically examine the cord of your appliance, and if itsappearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and havethe cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point wherethe cord exits the appliance.

CAUTION

NOTE After completing connection, if water leaks from the hose, repeat the same steps. Use the most conventional type

of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting thefaucet into the adaptor.


8/32

8

nstallationI Normal Tap without thread & screw type inlet hose

Normal Tap without thread & one touch type inlet hose (Single inlet models)

1. Unscrew the fixing screw toattach the tap. 2.Push the connector up till therubber packing is in tight contactwith the tap. Then tighten the 4screws.

3. Push the water supply hosevertically upwards so that therubber packing within in thehose can adhere completely tothe tap and then tighten it byscrewing it to the right.

1. Untighten the upper connectorscrew.

2. Push the upper connector up tillthe rubber packing is in tightcontact with the tap. Thentighten the 4 screws.

3. Connect the water supply hose

to the middle connector,pushing the plate down.

Make sure that there are nokinks in the hose and that it isnot crushed.

Make sure that the rubber sealis inside the hose connector.

UpperConnector

Rubberpacking

Middleconnector

Fixing screw

Guide plate

Connector

Rubber seal

Hose connector

Used the horizontal tap

Horizontal tap

Extension tap

Square tap

Rubber packing

UpperConnector

Middleconnector

Plate

UpperConnector

Water supply

hose

In case the diameter of the tap is

large remove the guide plate.

Turn the middle connector notto have water leaked.

To separate the water supplyhose from the middle connectorshut off the tap. Then pull theinlet hose down, pushing theplate down.


9/32

9

nstallationI

Installation of drain hose

The drain hose should not be placedhigher than 100 cm above the floor.

Proper securing of the drain hose willprotect the floor from damage due towater leakage.

When the drain hose is too long, donot force back into the washer. Thiswill cause abnormal noise.

When installing the drain hose sink,secure it tightly with a string.

Proper securing of the drain hose willprotect the floor from damage due to

water leakage.

This equipment is not designed for maritime use or for use mobile installations such ascaravans, aircraft etc.

Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday),especially if there is no floor drain(gully) in the immediate vicinity.When disposing of the appliance, cut off the mains cable, and destroy the plug Disable thedoor lock to prevent young children being trapped inside.Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a riskof suffocation !Keep all packaging well away from children


10/32

10

nstallationI Level adjustment

Concrete floors

Wooden floors (Suspended floors)

1.Adjusting the washing machine level properly prevents excessivenoise and vibration.Install the appliance on a solid and level floor surface, preferably in acorner of the room.

2. If the floor is uneven, adjust the adjustable feet as required. (do notinsert pieces of wood etc. under the feet)Make sure that all four feet are stable and resting on the floor andthen check that the appliance is perfectly level. (use a spirit level)

After the washer is level, tighten the lock nuts up towards of the base ofthe washer. All lock nuts must be tightened.

Diagonal Check

When pushing down the edges of the washing machine top plate diagonally, the machine

should not move up and down at all. (Please, check both of two directions)

If machine rocks when pushing the machine top plate diagonally, adjust the feet again.

The installation surface must be clean, dry and level. Install washer on a flat hard floor.

Tile floors (Slippery floors)

Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into 70x70 mmsections and stick the pieces on to the dry tile where machine is to be placed.) Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.

Wooden floors are particularly susceptible to vibration.

To prevent vibration we recommend you place rubber cups under each foot,at least 15mm thick under the washer, secured to at least 2 floor beams with screws.

If possible install the washer in one of the corners of the room, where the floor is more stable.Insert the rubber cups to reduce vibration.

You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.

Important!

Proper placement and levelling of the washer ensure long,regular and reliable operation. The washer must be absolutely horizontal and stand firmly in position. It must not Seesaw across corners under load.

The installation surface must be clean, free from floor wax and other lubricant coatings. Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

Rubber Cup

NOTE Timber or suspended type flooring may contribute toexcessive vibration and unblance errors.

NOTE In the case that the washing machine is installed on a raisedplatform, it must be securely fastened in orderto eliminate the risk that it might fall off.


11/32

11

are before washingC

1. Care LabelsLook for a care label on your clothes. This will tell you about the fabric content of your garment andhow it should be washed.

2. SortingTo get the best results, Sort clothes into loads that can be washed with the same wash cycle.Water temperature and spin speed and different fabrics need to be washed in different ways.Always sort dark colors from pale colors and whites. Wash separately as dye and lint transfer can

occur causing discoloration of white etc. If possible, do not wash heavily soiled items with lightlysoiled one.Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.Color (White, Lights, Darks) Separate white fabrics from colored fabrics.Lint (Lint producers, Collectors) Wash lint producers and lint collectors

separately.3. Caring before loading

Caring before washing

Before the first washing

Combine large and small items in a load. Load large items first. Large items should not be more than half

the total wash load.

Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.

Check all pockets to make sure that theyare empty. Items such as nails, hair clip,matches, pens, coins and keys can damageboth your washer and your clothes.

Close zippers, hooks and strings tomake sure that these items dontsnag on other clothes.

Pre treat dirt and stains by brushing a littledetergent dissolved in water onto stains likecollars and cuffs to help shift dirt.

Select a cycle (COTTON 60C, add a half load of detergent) allow the unit to wash

without clothing. This will remove residues and water from the drum that may have been leftduring manufacturing.

Check the folds of the flexible gasket (gray) andremove any small articles,if any.

Check inside of the drum and remove any leftitems in it for next wash cycle.

Remove any clothing or items on the flexiblegasket to prevent clothing and the gasketdamages.


12/32

12

dding detergentA

Main wash only

Pre Wash + Main Wash

Do not exceed the maximum fill line.Close the dispenser drawer slowly.Overfilling can cause early dispensingof the fabric softener which could stainclothes.

Do not leave the fabric softener in thedetergent drawer for more than 2 days.(Fabric softener could harden)

Softener will automatically be addedduring the last rinse cycle.

Do not open the drawer when water issupplied.

Solvents(benzene, etc) are notallowable.

1. The Dispenser Drawer

2. Adding Fabric Softener

Adding detergent and fabric softener

Do not pour fabric softenerdirectly on the cloths

NOTE

MAX

max


13/32

13

dding detergentA

The detergent should be used according to theinstruction of the detergent manufacture.

If too much detergent is used, too many suds

can occur and this will decrease the washing

result or cause heavy load to the motor.

Use powder detergent only for the front

loading washer.

If suds occur too much, pleas reduce the

detergent amount.

Detergent usage may need to be adjustedfor water temperature, water hardness,size and soil level of the load. For bestresults, avoid oversudsing.

4. Water softener

A water softener, such as Anti limescale

(Calgon) can be used to cut down on theuse of detergent in extremely hard waterareas. Dispense according to the amountspecified on the packaging.First add detergent and then the watersoftener.

Use the quantity of detergent as for softwater.

Tips

Full load : according to

manufacturers recommendation.Part load : 3/4 of the normalamount.

Minimum load : 1/2 of full load.

Detergent is flushed from the dispenserat the beginning of the cycle.

1) Open the door and Tablets into thedrum.

3. Detergent dosage

5. Using the Tablets

MAX

max

2) Load the laundry into the drum.

3) Close the door.


14/32

14

unctionF Recommended courses according to the laundry type

Water Temperature : Select the water temperature to the wash cycles.Always follow garment manufactures care label or instructions when laundering.

Medic Rinse : For high effectiveness or more purity in rinse operation you can choose Medic Rinse option. Pre Wash : If the laundry is heavily soiled, Pre Wash Course is recommended. Intensive : When washing heavily soiled laundry you can increase effectiveness by choosing Intensive option. Program setting with Cotton 60C+Intensive option for test in accordance or in conformity with EN60456 and

IEC60456. Crease Care : If you want to prevent crease, select Crease Care button.

Cotton Quick

Synthetic

Quick 30

Bio Care

Duvet

Hand Wash /

Wool

Boiling Care

Bulky

Baby Care

Cotton which is lightly soiled

Polyamide, Acryic, Polyester

Colored Laundry which is lightlysoiled fast.

For elimination of remnantdetergent after boiling wash

For elimination of protein stains

Hand wash marked delicate and

machine wash wool laundry

Cotton bedding with filling duvet,pillow, blanket, sofa cover withlight filling

DelicateDelicate laundry easily damaged(silk, curtains...)

Thick laundry absorbing muchwater(Jumper)

Laundry for infant

60C(95C)

30C(Cold)

60C(40C, 95C)

40C(Cold, 30C,

60C)

30C(Cold, 40C)

95C

40C(Cold, 30C)

- Medic Rinse- Intensive- Pre Wash- Crease Care

- Intensive- Crease Care

- Intensive- Pre Wash- Crease Care

Less than8.0 kg

Less than8.0 kg

1 king size(9 dog)

Less than6.0 kg

Less than8.0 kg

Less than2.0 kg

Less than4.0 kg

Less than8.0 kg

Less than2.0 kg

Less than2.0 kg

Program Fabric Type Proper Temp. Option Maximum Load

Cotton

Color fast garments

(shirts, night dresses,

pajamas...)and lightly soiled white

cotton(underwear)

60C(Cold, 30C,40C, 95C)

- Medic Rinse- Intensive- Pre Wash- Crease Care

Less than8.0 kg

Notes : Neutral detergent is recommended.The wool cycle features gentle tumbling and low-speed spin for garment care.

The wool wash cycle of this machine has been approved by Woolmark for the washing of machinewashable Woolmark products provided that the products are washed according to the instructionson the garment label and those issued by the manufacturer of this washing machine M0708.


15/32

15

ow to use washerH

Press the Power button to start.

Press the Start/Pause button.

Initial conditions

- Wash : main wash

- Rinse : 3 times

- Spin :

1400 rpm [F1422TD(1~9)]

1200 rpm [F1222TD(1~9)]

1000 rpm [F1022TD(1~9)]

- Water temperature : 60C

- Program : Cotton

Press the Power button to start.

Select the conditions which you want to use,by turning the program dial and pressingeach button.

For selecting the each conditions, please refer to

the page16~page21

Press the Start/Pause button.

1. Cotton automaticallyselected upon power on.

2. Manual Selecting

3. Beep on/off

The Beep on/off function can be set by

pressing and holding the TIme Delay buttonsimultaneously.

The Beep on/off function can be set at anytime and it is automatically canceled whenpower failure.Also the Beep on/off function works whenpower is off.


16/32

16

ow to use washerH

(1) Dial : Program

(2) Button : Start / Pause(3) Button : Spin(4) Button : Temperature

(5) Button : Power

(6) Button : Medic Rinse(7) Button : Pre Wash(8) Button : Intensive

(9) Button : Crease Care

(10) Child Lock(11) Tub Clean(12) Button : Time Delay

1. Power

2. Initial Program

Power

Press the Power button to turn power on and off. To cancel the Time Delay function, the power

button should be pressed.

When the Power button is pressed, thewasher is ready for Cotton program. And theother initial conditions as follows.

So, if you want to advance into the ashingcycle without changing the program, just

press the Start/Pause button and then thewasher will proceed.

IInitial program [F1422TD(1~9)]

- Cotton Program / Main wash /Normal Rinse / 1400 rpm / 60C

[F1222TD(1~9)]- Cotton Program / Main wash /Normal Rinse / 1200 rpm / 60C

[F1022TD(1~9)]

- Cotton Program / Main wash /Normal Rinse / 1000 rpm / 60C

Program

13 programs are available according to thelaundry type.

Lamp will light up to indicate selected program.

When Start/Pause button is pressed, theCotton program is automatically selected.

- By turning the Program dial, the program is

selected in order of Cotton Cotton Quick Synthetic Duvet

Bulky Quick 30 Rinse+Spin Spin Delicate Hand Wash/Wool Bio Care Boiling Care Baby Care.

Regarding to the laundry type for each program

Please refer to the page14.


17/32

17

ow to use washerHStart/Pause

Detecting

This Start/Pause button is used to startwash cycle or pause the wash cycle.

If temporary stop of wash cycle isneeded, press the Start/Pause button.

When in Pause, the power is turned offautomatically after 4 minutes.

NB. The door will not open before 1 to 2minutes when Pause is selected,or at the end of the wash cycle.

1. Start

2. Pause

While the "Detecting" is shown in the displaythe machine rotates slowly and detects howmany laundries are loaded in the drum. It willtake a few seconds.

Available in Cotton, Cotton Quick and Synthetic.

Door Lock

Lights whenever the door of the washer islocked.

The door can be unlocked by pressing the

Start/Pause button to stop the washer. The door can be opened after a short delay.

Option

By pressing theOption button, allOption functionsmay be selected.

2. Pre Wash

If the laundry is heavily soiled, Pre Wash

course is effective. Pre Wash is available in Cotton, Cotton

Quick, Synthetic, Bio Care, Baby Care andBoiling Care.

1. Medic Rinse

For high effectiveness or more purity in rinseoperation you can choose Medic Rinseoption.

It can be chosen in all course with theexception of Cotton Quick, Quick 30,Hand Wash/Wool, Duvet, Delicate and Bulky.

4. Crease Care

If you want to prevent crease, select thisbutton with spin speed.

The required lamp will light up for identification.

3. Intensive

If the laundry is heavily soiled Intensiveoption is effective.

By selecting the Intensive option, the wash

time may be extended, depending on theprogram selected.


18/32

18

ow to use washerHChild Lock

If you choose to lock the buttons on the controlassembly to prevent tampering this functionmay be selected.

Child Lock can be set by pressing the MedicRinse button and Pre Wash button

simultaneously. (About three seconds)

To deactivate Child Lock system, pressMedic Rinse and Pre Wash buttonssimultaneously again. (About three seconds)

To change to the desired program, whilst in

child lock mode.

1. Press both Medic Rinse and Pre Washtogether once again. (About three seconds)

2. Press the Start/Pause button.

3. Select the desired program and press theStart/Pause button again.

The child lock can be set at any time and itcan be deactivated only by using child lockcancel process. Turning the power off andoperational errors will not affect child lock.

Tub Clean

Tub Clean course can be set by pressingand holding Intensive and Pre Wash buttonsimultaneously.When Tub Clean course is set, display , and all buttons are inoperable.

TUB CLEAN is special cycle to clean theinside of the washer. This cycle uses higherwater level with higher spin speed. Performthis cycle regularly.

How to use the Tub Clean cycle:1. Remove any clothing or items from the

washer and close the door.2. Open the dispenser drawer and add Anti

limescale (Calgon) to the Main washcompartment.

NOTE: Do not add any detergent to thedetergent compartments. Excessivesuds may generate and leak from thewasher.

3. Close the dispenser drawer slowly.4. Power On and then press and hold

Intensive and Pre Wash button for 3 seconds.then is displayed in LED

5. Press the Start/Pause button to start.6. After the cycle is complete, leave the door

open to dry around the washer dooropening, flexible gasket and door glass.

CAUTION: If there is a small child, becareful not to leave the dooropen for too long.

!


19/32

19

ow to use washerHSpin

[F1222TD(1~9)] [F1022TD(1~9)][F1422TD(1~9)]

2. No spin

3. Rinse Hold

Rinse Hold is selected by pressing thespin button repeatedly this functionleaves clothes in the machine;suspended in the water after a rinsewithout entering into spin.

To proceed through to a drain or spin,once the rinse hold function is completedusing to Program dial and Spin button tothe required program.(Spin)

The required lamp will light up foridentification.

If No spin is selected, the washer stopsafter draining water.

1. Spin selection

Spin Speed is available according tothe program as follows.

F1422TD(1~9)

- Cotton, Cotton Quick, Rinse+Spin, Quick 30,Bio Care, Bulky, SpinRinse Hold - No Spin - 400 - 800 - 1400

- Delicate, Duvet, Baby Care, Boiling Care,Synthetic, Hand Wash/WoolRinse Hold - No Spin - 400 - 800

F1222TD(1~9)


- Delicate, Duvet, Baby Care, Boiling Care,Synthetic, Hand Wash/Wool

Rinse Hold - No Spin - 400 - 800

F1022TD(1~9)


- Delicate, Duvet, Baby Care, Boiling Care,Synthetic, Hand Wash/WoolRinse Hold - No Spin - 400 - 800

After selecting the spin course, thespin speed can be chosen bypressing the spin button.


20/32

20

ow to use washerHWater Temp.

By pressing the Temp.button, the watertemperature can beselected.

- Cold

- 30C / 40C / 60C / 95C

Water temperature can be selected

according to the program.

The required temperature lamp will light up

for identification.

For the more detailed information, please

refer to the page14.

Time Delay

Preparing washing before startingTime Delay

- Turn on the water tap.

- Load laundry and close the door.

- Place the detergent and fabric softener in

the drawer. How to set Time Delay

- Press Power button.- Turn the Program dial to select

the program you require.- Press Time Delay button and set the

desired time.- Press the Start/Pause button.

(: blinks.)

If Time Delay button is pressed, 3:00 is

displayed. The maximum delayed time is19 hours and the minimum time is 3 hours.

Each pressing of the button advances ontime delay by one hour.

To cancel the time delay, press the Powerbutton.

Time Delay is expected time from thepresent to the completion of washing cycleor selected process (Wash, Rinse, Spin).

According to the condition of water supply

and temperature, the delayed time and the

actual washing time may vary.


21/32

21

If the machine encounters a fault duringoperation, the associated fault will bedisplayed.

: Water pressure sensing error

: Problem of overfilling water

: Door is not closed

: Over load in motor

: Over load in motor

: Water inlet trouble

: Drainage trouble

: Unbalanced load

: Water temperature trouble

: The washer experienced apower failure.

If these error letters are displayed, please

refer to the troubleshooting page26 and

follow the guide.

Display

When child lock is selected, the

is displayed. When time delay is selected, it shows

the remaining time to finish the selectedprogram.

When washing cycle is completed, is displayed on the Multidisplay.

During washing cycle, the remaining washing

time is displayed.

Recommended program by manufacturer.

- Cotton : around 1 hour and 54 minutes

- Cotton Quick : around 1 hour and 26 minutes

- Synthetic : around 1 hour and 15 minutes

- Quick 30 : around 30 minutes

- Hand Wash/Wool : around 45 minutes

- Delicate : around 51 minutes

- Duvet : around 1 hour and 9 minutes

- Bulky : around 59 minutes

- Baby Care : around 1 hour and 54 minutes

- Bio Care : around 2 hours and 14 minutes

- Boiling Care : around 2 hours and 17 minutes

- Rinse+ Spin : around 20 minutes

- Spin : around 15 minutes

The washing time may vary by the amount oflaundry, water pressure, water temperature and

other washing conditions.

If an unbalanced load is detected or if the suds

removing program operates, the wash time may

be extended.

(Max. increasing time is 45 minutes.)

1. Special function display

3. Completion of washing

4. Time left

2. Self diagnosis display

ow to use washerH


22/32

22

aintenanceM

The water inlet filter

- " " error message will blink on the control panel when water does not enter the

detergent drawer.

- If water is very hard or contains traces of lime deposit, the water inlet filter may

become clogged.

It is therefore a good idea to clean it from time to time.

Before cleaning the washer interior, unplug the electrical power cord to avoid electrical

shock to avoid electrical shock hazards.

When disposing of the appliance, cut off the mains cable, and destroy the plug Disablethe door lock to prevent young children being trapped inside.

1. Turn off the water tap.

2. Unscrew the water inlet hose.

3. Clean the filter using a hard bristle

brush.

4. Tighten up the inlet hose.


23/32

23

aintenanceM

3

2

3

2

1

100

The drain pump filter The drain filter collects threads and small objects left in the laundry.

Check regularly that the filter is clean to ensure smooth running of your machine.

CAUTION First drain using the drain hose and then open the pump filter to

remove whatever any threads or objects.

Be careful when draining if the water is hot.

Allow the water to cool down before cleaning the drain pump, carrying outemergency emptying or opening the door in an emergency.

!

1. Open the lower cover cap () by using

a coin.Drain plug () to pull out the hose.

2. Unplug the drain plug (), allowing thewater to flow out. At this time use a

vessel to prevent water flowing on to the

floor. When water does not flow any

more, turn the pump filter () open to

the left.

3. Remove out any foreign material fromthe pump filter ().

4. After cleaning, turn the pump filter ()

clockwise and insert the drain plug ()tothe original place. close the lower cover

cap.


24/32

24

aintenanceMI Dispenser drawer

After a while detergents and fabric softeners leave a deposit in the drawer.

It should be cleaned from time to time with a jet of running water. If necessary it can be removed completely from the machine by pressing the catch

downwards and by pulling it out.

To facilitate cleaning, the upper part of the fabric softener compartment can be removed.

I The drawer recess

Detergent can also accumulate inside the recess which shouldbe cleaned occasionally with an old toothbrush.

Once you have finished cleaning, replace the drawer and run arinse cycle without laundry.

I The washing drum

If you live in a hard water area, limescale may continuously build up in places where it cannot beseen and thus not easily removed.Over time the build up of scale clogs appliances, and if it is not kept in check these may have tobe replaced.

Although the washing drum is made of Stainless steel, specks of rust can be caused by smallmetal articles (paper clips, safety pins) which have been left in the drum.

The washing drum should be cleaned from time to time.

If you use descaling agents, dyes or bleaches, make sure they are suitable for washing machineuse.

Descaler may contain chemicals that may damage part of your washing machine.

Remove any spots with a stainless steel cleaning agent.

Never use steel wool.

MAX

max MAX

max


25/32

25

aintenanceMI Cleaning your washer

1. ExteriorProper care of your washer can extend its life.

The outside of the machine can be cleaned with warm water and a neutral non abrasive

household detergent.

Immediately wipe off any spills. Wipe with damp cloth.

Try not to hit surface with sharp objects.

IMPORTANT: Do not use methylated spirits, diluents or similar products.

2. Interior

Dry around the washer door opening, flexible gasket and door glass.

Run washer through a complete cycle using hot water.

Repeat process if necessary.

I Cold condition

If the washer is stored in an area where freezing may occur or moved in freezing

temperatures, follow these instructions to prevent damage to the washer:1. Turn off water supply tap.

2. Disconnect hoses from water supply and drain water from hoses.

3. Plug electrical cord into a properly grounded electrical outlet.

4. Add 1gallon(3.8L) of nontoxic recreational vehicle(RV) antifreeze into an empty wash drum.

Close the door.

5. Set spin cycle and let washer spin for 1minute to drain out all water.

Not all of the RV antifreeze will be expelled.

6. Unplug electrical power cord, dry the drum interior, and close the door.

7. Remove dispenser drawer drain and dry excessive water from the compartments.

8. Store washer in an uprignt position.

9. To remove antifreeze from washer after storage, run empty washer

through a complete cycle using detergent. Do not add wash load.

NOTE Remove hard water deposits using only cleaners labeled as washer safe.


26/32

26

roubleshooting guide

This washing machine is equipped with automatic safety functions which detect and diagnose faults at anearly stage and react appropriately

When the machine does not function properly or does not function at all, check the following points beforeyou contact your service provider.

Symptom Possible Cause Solution

Rattling andclanking noise

Thumping sound

Vibrating noise

Water leaks.

Oversudsing

Water does not enter

washer or it entersslowly

Water in the washerdoes not drain ordrains slowly.

Foreign objects such as coins orsafety pins maybe in drum orpump.

Heavy wash loads may producea thumping sound. This is usuallynormal.

Have all the transit bolts andpacking been removed?

Are all the feet resting firmly onthe ground?

Fill hoses or drain hose are looseat tap or washer.

House drain pipes are clogged.

Water supply is not adequate in

area. Water supply tap is not

completely open.

Water inlet hose(s) are kinked.

The filter of the inlet hose(s)clogged.

Drain hose is kinked or clogged.

The drain filter is clogged.

Stop washer and check drumand drain filter.If noise continues after washeris restarted, call your authorisedservice centre.

If sound continues, washer isprobably out of balance. Stop andredistribute wash load.

If not removed duringinstallation. Refer to Installation guidefor removing transit bolts.Wash load may be unevenlydistributed in drum. Stop washer andrearrange wash load.

Check and tighten hose connections.

Unclog drain pipe. Contact plumberif necessary.

Too much detergent or unsuitabledetergent may cause excessivefoaming which may result in waterleaks.

Check another tap in the house.

Fully open tap.

Straighten hose.

Check the filter of the inlet hose.

Clean and straighten the drain hose.

Clean the drain filter

T


27/32

27

Washer does not start

Washer will not spin

Door does not open

Wash cycle timedelayed

Electrical power cord may notbe plugged in or connectionmay be loose.

House fuse blown, circuitbreaker tripped,or a poweroutage has occurred.

Water supply tap is not turnedon.

Check that the door is firmly

shut.

Make sure plug fits tightly in wall

outlet.

Reset circuit breaker or replace fuse.Do not increase fuse capacity.

If problem is a circuit overload, haveit corrected by a qualified electrician.

Turn on water supply tap.

Close the door and press theStart/Pause button. After pressing

the Start/Pause button, it may takea few moments before the clothes

washer begins to spin. The doormust lock before spin can be

achieved.

Once started, the door can not beopened for safety reasons.

Wait one or two minutes beforeopening the door to give the electric

locking mechanism time to release.

The washing time may vary by theamount of laundry, water

pressure, water temperature andother usage conditions.

If the imbalance is detected or if thesuds removing program works, the

wash time shall be increased.


roubleshooting guideT


28/32

28

roubleshooting guide


T

Water supply is not adequate in area. Water supply taps are not completely open. Water inlet hose(s) are kinked. The filter of the inlet hose(s) are clogged.

Drain hose is kinked or clogged. The drain filter is clogged.

Load is too small.

Load is out of balance. The appliance has an imbalance detectionand correction system. If individual heavyarticles are loaded (ex. bath mat, bath robe,etc.) this system may stop spinning or eveninterrupt the spin cycle altogether.

If the laundry is still too wet at the end of thecycle, add smaller articles of laundry tobalance the load and repeat the spin cycle.

Is the door opened?

Water overfills due to the faulty water valve.

Water level sensor has malfunctioned.

Over load in motor.

Over load in motor.

The washer experienced a power failure.

Check another tap in the house.Fully open tap.Straighten hose(s).Check the filter of the inlet hose.

Clean and straighten the drain hose.Clean the drain filter.

Add 1 or 2 similar items to helpbalance the load.Rearrange load to allow properspinning

Close the door.

If is not released, call forservice.

Unplug the power plug and call forservice.

Close the water tap.Unplug the power plug.Call for service.

Restart the cycle.


29/32

29

erms of WarrantyT

What Is Not Covered:

Service trips to your home to teach you how to use the product.

If the product is connected to any voltage other than that shown on the rating plate.

If the fault is caused by accident, neglect, misuse or Act of God.

If the fault is caused by factors other than normal domestic use or use in accordance

with the owner's manual.

Provide instruction on use of product or change the set-up of the product.

If the fault is caused by pests for example, rats or cockroaches etc..

Noise or vibration that is considered normal for example water drain sound, spinsound, or warming beeps.

Correcting the installation for example, levelling the product, adjustment of drain.

Normal maintenance which recommended by the owner's manual.

Removal of foreign objects / substances from the machine, including the pump andinlet hose filter for example, grit, nails, bra wires, buttons etc.

Replace fuses in or correct house wiring or correct house plumbing.

Correction of unauthorized repairs.

Incidental or consequential damage to personal property caused by possible defectswith this appliance.

If this product is used for commercial purpose, it is not warranted.

(Example : Public places such as public bathroom, lodging house, trainingcenter, dormitory)

If the product is installed outside the normal service area, any cost oftransportation involved in the repair of the product, or the replacement of adefective part, shall be borne by the owner.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to aproduct it means the product is covered by the EuropeanDirective 2002/96/EC.

2. All electrical and electronic products should be disposed ofseparately from the municipal waste stream via designatedcollection facilities appointed by the government or the localauthorities.

3. The correct disposal of your old appliance will help preventpotential negative consequences for the environment andhuman health.

4. For more detailed information about disposal of your oldappliance, please contact your city office, waste disposalservice or the shop where you purchased the product.


30/32

30

emoM


31/32


32/32

For U.K. Customer

CUSTOMER SERVICES Tel. : 0870 - 873 - LGLG(5454)

LG Washing Machine MFL49491523(3)

Documents

Transcript of LG Washing Machine MFL49491523(3)