Lesson Plan

Name- Mrs. Anju (Theory and Practical)

Disciline- Applied Science

Semester – 2nd

Subject - Physics

Duration – 15 weeks (January 2018 to April 2018)

Work load (per week):- lectures-04 and practicals-02

Week Theory Practical

1st

Lect.

day

Topic Practical

day

Topic

1st Introduction to periodic motion 1st Verify the time period of cantilever

2nd Simple harmonic motion

3rd

Simple harmonic motion 2nd Verify the time period of cantilever

4th

Uniform circular motion

2nd 1st Velocity of particle execution SHM 1st Revision & Checked practical note

book 2nd Acc. And frequency of particle

execution SHM

3rd

Transverse and longitudinal wave

motion

2nd Revision & Checked practical note

book

4th

Transverse and longitudinal wave

motion, Velocity of light

3rd 1st Cantilever, vibration of spring mass

system, time period

1st Determination of time period of

simple pendulum

2nd Free, forced and resonance vibrations

3rd

Acoustics-reverberation, Reverberation

time

2nd Determination of time period of

simple pendulum

4th

Reverberation time, echo and noise

4th 1st Methods to control reverberation time 1st Revision & Checked practical note

book 2nd Ultrasonic production methods

3rd

Applications to cold welding, drilling

and SONAR

2nd Revision & Checked practical note

book

4th

1st Assignment and class test

5th 1st Reflection and refraction of light 1st Verify Ohm’s law

2nd Lens formula

3rd

Images by lenses

2nd Verify Ohm’s law

4th

microscope

6th 1st Telescope, power of lenses

1st Revision & Checked practical note

book

2nd Total internal reflection

3rd

Coulombs law

2nd Revision & Checked practical note

book

4th

Electric field and Guass law

7th 1st Applications of guass law

1st To study law of reflection using

mirrors

2nd Applications of guass law

3rd

Capacitor and their types

2nd To study law of reflection using

mirrors

4th

Series and parallel combination of

capacitor

8th 1st Dielectric, dielectric constant 1st Revision & Checked practical note

book 2nd 2nd Assignment and class test

3rd

Revision of 1st unit. 2nd Revision & Checked practical note

book

4th

Current resistance and potential

9th 1st Ohm’s law and specific resistance 1st Verification of resistances in series

and parallel combination 2nd Series and parallel combination of

resistances

3rd

Kirchoff’s law and wheat stone bridge 2nd Verification of resistances in series

and parallel combination

4th

Heating effect of current, power

10th 1st

Intrinsic and extrinsic semiconcuctor

1st Revision & Checked practical note

book

2nd N and p type semiconductors

3rd

p-n junction diode and characteristics 2nd Revision & Checked practical note

book

4th

Half and full wave rectifier

11th 1st Half and full wave rectifier 1st Re-Verification of resistances in

series and parallel combination 2nd Transistors introduction

3rd

3rd assignment and class test 2nd Re-Verification of resistances in

series and parallel combination

4th

Revision of 2nd unit

12th 1st Introduction to laser 1st Revision & Checked practical note

book 2nd Stimulated emission and population

inversion

3rd

Ruby laser and its application 2nd Revision & Checked practical note

book

4th

Optical fibres

13th 1st Superconductivity phenomena

1st Conversion of galvanometer into

ammeter and voltmeter of given

range 2nd Type 1 and type 11 superconductivity

3rd

Revision of 7th unit 2nd Conversion of galvanometer into

ammeter and voltmeter of given

range 4th

Class test of 7th unit

14th 1st Class test of 6th, 7th unit 1st Revision & Checked practical note

book 2nd

Revision of 5th unit

3rd

Revision of 4th unit 2nd Revision & Checked practical note

book

4th

Class test of 5th , 4th unit

15th 1st

Revision of 1st, 2nd units

1st Re revision of experiments

2nd

Class Test of 1st, 2nd units

3rd

Discussion on Problems

2nd Re revision of experiments

4th

Discussion on Problems

Lesson Plan

Name- Mr. Parveen Dhaka (Theory and Practical)

Discipline- Applied Science

Semester – 2nd

Subject - Chemistry

Duration – 15 weeks (January 2018 to April 2018)

Work load (per week):- lectures-04 and practicals-02

Week Theory Practical

1st

Lect.

day

Topic Practical

day

Topic

1st Metallurgy (types), Mineral, ore, gangue

or matrix.

1st Gravimetric analysis and study of

apparatus used

2nd flux, slag, methods of concentrating the

ores

3rd

Revision of 1st and 2nd lecture 2nd Gravimetric analysis and study of

apparatus used

4th

roasting , calcinations, smelting

2nd 1st refining of metal, Metallurgy of

Aluminium

1st Revision & Checked practical note

book

2nd Metallurgy of Iron

3rd

Alloying, composition, properties and

uses of alloys,

2nd Revision & Checked practical note

book

4th

1st Class test of unit 1st

3rd 1st ‘Fuel’ characteristics of a good fuel and

classification

1st Determination of %age composition

of mixture

2nd Calorific value of a fuel

3rd

bomb-calorimeter method of finding the

Calorific values

2nd Determination of %age composition

of mixture

4th

‘ Proximate’ and Ultimate’ analysis of a

coal

4th 1st Merits of gaseous fuels 1st Revision & Checked practical note

book 2nd composition, properties and uses of (i)

Water gas (ii) Oil gas

3rd

composition, properties and uses of

Biogas

2nd Revision & Checked practical note

book

4th

calorific values and applications of (i)

LPG (ii) CNG (iii) Power Alcohol

5th 1st 1st assignment and revision 1st Determination of viscosity of a

given oil via redwood viscometer 2nd direct chemical action theory of

corrosion

3rd

electro chemical theory and Passivity 2nd Determination of viscosity of a

given oil via redwood viscometer

4th

Prevention of corrosion

6th 1st Prevention of corrosion 1st Revision & Checked practical note

book 2nd 2nd class test

3rd

Principal of lubrication fluid film

lubrication, boundary lubrication,

extreme pressure lubrication

2nd Revision & Checked practical note

book

4th

Principal of lubrication fluid film

lubrication, boundary lubrication,

extreme pressure lubrication

7th 1st Physical Properties of Lubricants 1st Determine the flash point of given

2nd Chemical properties of Lubricants oil via Able’s Flash point apparatus

3rd

Revision of unit 4 2nd Determine the flash point of given

oil via Able’s Flash point apparatus

4th

Class test of unit 4

8th 1st Revision of unit 3rd 1st Revision & Checked practical note

book 2nd Revision of unit 2nd

3rd

Revision of unit 1st and 2nd assignment 2nd Revision & Checked practical note

book

4th

Calss test of unit 1st and 3rd

9th 1st chemical composition and types of

glasses

1st Estimate the amount of moisture

and ash in given sample of coal

2nd Applications of glass

3rd

Manufacture of glass 2nd Estimate the amount of moisture

and ash in given sample of coal

4th

Revision of unit 5th

10th 1st Organic Compounds 1st Revision & Checked practical note

book 2nd functional goup

3rd

Homogolus Series 2nd Revision & Checked practical note

book

4th

Nomenclature

11th 1st Nomenclature 1st Electroplate the given strip of Cu

with Ni 2nd Nomenclature

3rd

3rd assignment unit 6 2nd Electroplate the given strip of Cu

with Ni

4th

Class test of unit 6

12th 1st Polymers, monomer & degree of

polymerization

1st Revision & Checked practical note

book

2nd addition & condensation polymers

3rd

PVC, Polyester, Teflon, Nylon 66,

Bakelite

2nd Revision & Checked practical note

book

4th

PVC, Polyester, Teflon, Nylon 66,

Bakelite

13th 1st thermo & thermo setting plastics 1st Conformation test of alcohol,

aldehyde and carboxylic acid 2nd Applications of polymers

3rd

plastics in daily life. 2nd Conformation test of alcohol,

aldehyde and carboxylic acid

4th

Revision of unit 7th

14th 1st Test of unit 7 1st Revision & Checked practical note

book 2nd Re-revision

3rd

Re-revision 2nd Revision & Checked practical note

book

4th

Re-revision

15th 1st Test 1st Re revision of experiments

2nd Test

3rd

Test 2nd Re revision of experiments

4th

Test

Lesson Plan

Name- Mr. Rajiv Chahal (Theory and Practical)

Disciline- Applied Science

Semester – 2nd

Subject - Physics

Duration – 15 weeks (January 2018 to April 2018)

Work load (per week):- lectures-04 and practicals-02

Week Theory Practical

1st

Lect.

day

Topic Practical

day

Topic

1st Introduction to periodic motion 1st Verify the time period of cantilever

2nd Introduction to periodic motion

3rd

Simple harmonic motion 2nd Verify the time period of cantilever

4th

Uniform circular motion

2nd 1st Velocity, acc. Of particle execution

SHM

1st Revision & Checked practical note

book

2nd Velocity, acc. Of particle execution

SHM

3rd

Frequency and velocity of light 2nd Revision & Checked practical note

book

4th

Transverse and longitudinal wave

motion

3rd 1st Cantilever, vibration of spring mass

system, time period

1st Determination of time period of

simple pendulum

2nd Free, forced and resonance vibrations

3rd

Acoustics-reverberation 2nd Determination of time period of

simple pendulum

4th

Reverberation time, echo and noise

4th 1st Methods to control reverberation time 1st Revision & Checked practical note

book 2nd Ultrasonic production methods

3rd

Applications to cold welding, drilling

and SONAR

2nd Revision & Checked practical note

book

4th

1st Assignment and class test

5th 1st Reflection and refraction of light 1st Verify Ohm’s law

2nd Lens formula

3rd

Images by lenses

2nd Verify Ohm’s law

4th

microscope

6th 1st Telescope, power of lenses

1st Revision & Checked practical note

book

2nd Total internal reflection

3rd

Coulombs law

2nd Revision & Checked practical note

book

4th

Electric field and Guass law

7th 1st Applications of guass law

1st To study law of reflection using

mirrors

2nd Applications of guass law

3rd

Capacitor and their types

2nd To study law of reflection using

mirrors

4th

Series and parallel combination of

capacitor

8th 1st Dielectric, dielectric constant 1st Revision & Checked practical note

book 2nd 2nd Assignment and class test

3rd

Revision of 1st unit. 2nd Revision & Checked practical note

book

4th

Current resistance and potential

9th 1st Ohm’s law and specific resistance 1st Verification of resistances in series

and parallel combination 2nd Series and parallel combination of

resistances

3rd

Kirchoff’s law and wheat stone bridge 2nd Verification of resistances in series

and parallel combination

4th

Heating effect of current, power

10th 1st

Intrinsic and extrinsic semiconcuctor

1st Revision & Checked practical note

book

2nd N and p type semiconductors

3rd

p-n junction diode and characteristics 2nd Revision & Checked practical note

book

4th

Half and full wave rectifier

11th 1st Half and full wave rectifier 1st Re-Verification of resistances in

series and parallel combination 2nd Transistors introduction

3rd

3rd assignment and class test 2nd Re-Verification of resistances in

series and parallel combination

4th

Revision of 2nd unit

12th 1st Introduction to laser 1st Revision & Checked practical note

book 2nd Stimulated emission and population

inversion

3rd

Ruby laser and its application 2nd Revision & Checked practical note

book

4th

Optical fibres

13th 1st Superconductivity phenomena

1st Conversion of galvanometer into

ammeter and voltmeter of given

range 2nd Type 1 and type 11 superconductivity

3rd

Revision of 7th unit 2nd Conversion of galvanometer into

ammeter and voltmeter of given

range 4th

Class test of 6,7th unit

14th 1st Class test of 1st, 2nd unit 1st Revision & Checked practical note

book 2nd

Revision of 3rd unit

3rd

Revision of 4th unit 2nd Revision & Checked practical note

book

4th

Class test of 3rd, 4th unit

15th 1st

Re revision of 1-3 units

1st Re revision of experiments

2nd

problems

3rd

Re revision of 4-7 units

2nd Re revision of experiments

4th

problems

Lesson Plan

Name- Mrs. Usha (Theory and Practical)

Discipline- Applied Science

Semester – 2nd

Subject – English Language-ɪɪ

Duration – 15 weeks (January 2018 to April 2018)

Work load (per week):- lectures-03 and practicals-02

Week Theory Practical

1st

Lect.

day

Topic Practical

day

Topic

1st Prepositions

1

Debate 2nd Prepositions 3rd

Prepositions

2nd 1st Framing questions

2

Telephonic Conversation: general

etiquette for making and receiving

calls 2nd Framing questions 3rd

Framing questions

3rd 1st Conjunctions

3

Offering- Responding to offers. 2nd Conjunctions

3rd

Conjunctions

4th 1st Tenses

4

Requesting- Responding to requests 2nd Tenses 3rd

Tenses

5th 2nd Unseen Passage for Comprehension

5

Congratulating 3rd

Unseen Passage for Comprehension

4th

Unseen Passage for Comprehension

6th 1st Vocabulary enhancement- Prefixes,

Suffixes

6

Exploring sympathy and

condolences 2nd Vocabulary enhancement- Prefixes,

Suffixes

3rd

Vocabulary enhancement- Prefixes,

Suffixes

7th 1st One word substitution, Synonym and

Antonym

7

Asking Questions 2nd One word substitution, Synonym and

Antonym 3rd

One word substitution, Synonym and

Antonym 8th 1st Business Letters 8

Polite respones

2nd Business Letters

3rd

Business Letters

9th 1st Floating Quotations 9 Complaining

2nd Floating Quotations

3rd

Floating Quotations

10th 1st Placing Order 10 Warning

2nd Placing Order

3rd

Complaint Letter

11th 1st Complaint Letter

2nd Complaint Letter 11

Asking and giving information 3rd

Official Letters- letters to Government

and other offices

12th 1st Official Letters- letters to Government

and other offices

12

Getting and giving permission 2nd Official Letters- letters to Government

and other offices

3rd

Memos

13th 1st Memos

13

Getting and giving permission 2nd Circular

3rd

Circular

14th 1st Office Order 14

Asking for and giving opinions 2nd Office Order

3rd

Agenda

15th 1st Agenda

15

Asking for and giving opinions 2nd Minutes of Meeting

3rd

Minutes of Meeting