Leisure Vac™Leisure Vac™ Auto pool Cleaner Auto pool Cleaner

Trouble shooting Guide:Trouble shooting Guide:Top Head AssemblyTop Head Assembly

• Problem:Problem: Debris in Debris in the top head, the top head, causing cleaner to causing cleaner to not work due to not work due to poor water flow.poor water flow.

• Solution:Solution: Remove Remove both drive tubes both drive tubes (drive tubes are (drive tubes are press fit only) and press fit only) and clean top head. clean top head.

Trouble shooting: Trouble shooting: Bottom head assemblyBottom head assembly

• Problem:Problem: Debris in Debris in the bottom head, the bottom head, causing cleaner to causing cleaner to not work due to not work due to poor water flow.poor water flow.

• Solution:Solution: Remove Remove set screw and set screw and flapper cover, flapper cover, proceed cleaning proceed cleaning any debris in the any debris in the flapper chamber.flapper chamber.

Making necessary adjustments:Making necessary adjustments:Proper Hose LengthProper Hose Length

• Leisure Vac cleaner hose should be one Leisure Vac cleaner hose should be one hose length longer than the farthest hose length longer than the farthest point in the pool when attached to the point in the pool when attached to the skimmer or dedicated suction port. skimmer or dedicated suction port. Too much hoseToo much hose will cause the cleaner will cause the cleaner to tangle up on itself and circle. to tangle up on itself and circle. Not Not enough hoseenough hose will cause the cleaner to will cause the cleaner to not clean areas of the pool.not clean areas of the pool.

Making necessary adjustments:Making necessary adjustments:Regulator ValveRegulator Valve

• The Regulator Valve adjustment is critical The Regulator Valve adjustment is critical to the cleaner speed.to the cleaner speed.

• Adjust the regulator valve “open or Adjust the regulator valve “open or Closed” to control the speed of the cleanerClosed” to control the speed of the cleaner

• The The proper speedproper speed of the cleaner is of the cleaner is approximately approximately 12 ft. per minute12 ft. per minute..

• A A dirty filterdirty filter will affect the speed of the will affect the speed of the cleaner. cleaner. Always make sure to clean your Always make sure to clean your pool filter regularly.pool filter regularly.

Making necessary adjustments:Making necessary adjustments:Hose weightHose weight

• The hose weight will dramatically effect the The hose weight will dramatically effect the Leisure Vac’s ability to climb the pool walls. Leisure Vac’s ability to climb the pool walls. Moving the hose weight Moving the hose weight towardstowards the the cleaner head will keep the cleaner from cleaner head will keep the cleaner from climbing above the water line. Moving the climbing above the water line. Moving the hose weight hose weight back back will allow the cleaner to will allow the cleaner to climb out of deep end profiles and pool climb out of deep end profiles and pool walls.walls.

• The The correct starting pointcorrect starting point for the hose for the hose weight should be weight should be 3 ft. back3 ft. back ( approx. one ( approx. one hose length) from the cleaner head.hose length) from the cleaner head.

Making necessary adjustments:Making necessary adjustments:Return line diverter Return line diverter

• The Return Line diverter can be used to The Return Line diverter can be used to change the surface water flow.change the surface water flow.

• Remove return line “eyeball” and replace Remove return line “eyeball” and replace with “return line diverter” to with “return line diverter” to divert the divert the surface water flow downwardsurface water flow downward..

• Use return line diverter when surface flow Use return line diverter when surface flow from return line prevents the cleaner from from return line prevents the cleaner from cleaning an area ( usually in front of return cleaning an area ( usually in front of return line) of the pool.line) of the pool.

Making Necessary Making Necessary Adjustments:Adjustments:

“Tricky or Trouble areas”“Tricky or Trouble areas”• In some pools, Steps, In some pools, Steps,

Ladders, Main Drains, Ladders, Main Drains, Boulders, or special Boulders, or special shapes/ Designs may shapes/ Designs may cause the cleaner to get cause the cleaner to get trapped. The optional trapped. The optional “Switch” works with the “Switch” works with the movement of the cleaner movement of the cleaner to wind a simple spring. to wind a simple spring. Once the spring has been Once the spring has been wound, The spring wound, The spring “switches” the hose “switches” the hose direction and re-directs direction and re-directs the cleaner.the cleaner.