LEICA GPS1200 Series

High performance GPS equipment fully compatible with TPS1200

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

FUNCTIONintegrated

LEICA GPS1200

With a new, ultra-precise GPS measurement engine,

new, fast, self-checking RTK algorithms,

and a comprehensive, self-explanatory user interface,

LEICA System 1200 receivers provide

all the flexibility, power and performance needed

for every type of GPS application.

Built to the toughest MIL specifications,

they withstand extreme temperatures,

the worst weather

and the roughest site conditions.

Best GPS and RTK technology Fast satellite acquisition, high accuracy measurements,tracking to low elevations,multipath mitigation, jam-ming resistant, high updaterate, low latency, and fast,reliable, long-range RTK.

GPS/TPS: standardized interface Keyboard and touch screen,intuitive interface, powerfuldata management, on-boardroutines and programs: all easy to use and identicalfor GPS and TPS.

User programmableWrite your own programsand work in the way youwant for your own specialapplications and require-ments. Benefit from thepower and flexibility ofSystem 1200.

Fully waterproof, incredibly robustGPS1200 receivers are designed to work anywhereunder the roughest conditionsimaginable. They float, withstand falls, jolts andvibrations, operate in rain,dust, sand and snow, at temperatures from –40°C to + 65°C.

Totally versatileGPS1200 can be used as a reference or rover in anymode from static to RTK.Small, light, and supportingall formats and communi-cation devices, it can be usedon a pole, in a minipack, on a tripod, or even on a construction machine, survey boat or aircraft.

For all applicationsYou can use GPS1200 foreverything: control, topo,engineering, cadastre, stakeout, monitoring, seismic –whatever you want.

TPS1200

Top performance, high accuracytotal stations do everything youwant and much more.

GPS1200

Unites top GPS technology withpowerful data management.Perfect for all GPS applications.

Combine GPS and TPS. Use them in the same way. Change easily from one to the other. Work faster, more accurately and more efficiently. Enjoy all the freedom, flexibility and power of System 1200.

LEICA System 1200

GPS and TPSWorking together For all applications Today and in the future

Designed and built to themost stringent standardswith the latest measurement technologies, LEICA System1200 instruments are extremely efficient and reliable, and stand up to the most severe environ-ments.

A new, highly intuitive userinterface, a multitude of func-tions and features, powerfuldata management, and user-programming capabilities arecommon to both System 1200GPS and TPS instruments.

Operators can switch instantly between GPS andTPS and use whichever is the most convenient and suitable; extra training is not required.

These new high-tech GPSand TPS instruments withidentical operation enableyou to do every type of job,faster, more accurately andmore efficiently than everbefore.

And most important, youreduce your costs andincrease your profits.

Standardized accessories

Same batteries, chargers and accessories used for bothGPS and TPS; keep equipmentcosts down.

LEICA Geo Office

Everything you need in a single package for GPS andTPS: import, visualization,conversions, quality control,processing, adjustment,reporting, export etc.

Identical data management

As GPS and TPS use exactly the same format and data management, you can transfer cards from one to the other andwork in the same way.

Uniform operating concept

Same operation for GPS andTPS. Use whichever is themost convenient.

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

30 km range

5 sec check

Exceptionally ruggedDon’t worry about how yourcrews handle GPS1200. It’sbuilt to MIL specs to with-stand the roughest use. With its strong, precision-machined magnesium housing, GPS1200 stands up to drops and falls and thejolts and vibrations ofmachines. Even the RTK poleequipment survives falls.

Immune to bad weatherDesigned for temperaturesfrom –40°C to +65°C (storage+80°C), GPS1200 shrugs offarctic cold and blisteringheat. Fully waterproof – withstands immersion to 1 m – sand and dustproof, it operates perfectly in anyconditions from tropical rainfall (up to 100% humidity) to desert sandstorms. GPS1200 just keeps on working.

SmartTrack GPS technologyGPS1200’s SmartTrack measurement engine acquiresall visible satellites withinseconds, tracks to low eleva-tions, and measures undertrees and in areas of inter-ference where other receiversoften fail. Strong signals,highly effective multipathmitigation and advanced anti-jamming guarantee top GPS performance.

A further advantage is thatGPS1200 receivers with Smart-Track technology are designedso that they can be upgradedto support future GPS satellitesignal developments. Yourinvestment is secure.

SmartCheck 30 km RTKRTK is faster, more accurateand more reliable than everbefore. SmartCheck processesSmartTrack measurements for centimeter-accuracy, 20 Hz RTK at 30 km or more.Initialize within seconds andsurvey under trees and whereRTK never worked in the past.A unique, built-in integritymonitoring system checks allresults immediately.

High contrast touch screenThe high quality 1/4 VGA (11 lines by 32 characters)touch screen guarantees perfect clarity and contrast.Whether in fading light orbright sunshine, you canalways read the display perfectly. Operate using thetouch screen or the QWERTYkeyboard, whichever you prefer.

With or without controllerConnect the controller to thereceiver when you need toinput information and makefull use of the on-board functions and programs. Use with or without the controller at reference sta-tions and for static surveys.

Keyboard illuminationSwitch on the display andkeyboard illumination whenworking at night. All the keys light up.

RTK/DGPS communicationRadio modems, GSM, high-speed wireless andTDMA modules fit in water-proof housings attached tothe receiver. Attach eitherone or two devices forRTK/DGPS reference androver applications.

A wireless tech-nology housing is availableto enable connectivity withGSP1200 and other compa-tible wireless products.

Use the medium that suitsyour projects best.

LEICA GPS1200Fast, accurate, rugged and reliableEverything you need for all GPS applications

CompactFlash cardsSame CompactFlash cardsfor GPS and TPS.

Plug-in Li-lon batteriesFor reliable, long-lastingpower, GPS1200 uses thebest, high-capacity batteriesavailable. Work for up to 15hours with just two plug-in,Lithium-ion mini batteries.

TPS1200 Total StationsGPS and TPS use the sameCompactFlash cards, formatsand data management.Transfer cards from one to the other and continueworking in the same way.

LEICA GPS SPIDERSoftware package for continuously operating GPSreference stations. Providesfull control, monitoring anddata management. Ideal for reference stations and networks with GPS1200receivers.

Use GPS1200 for everything■ For RTK, DGPS, ■ and static data logging■ As a rover or reference■ On a pole, tripod, pillar,

or in a minipack■ On construction machines,

survey boats, or planes■ For every type of

application

LEICA Geo OfficeSoftware support package for GPS and TPS with toolsand components for import,visualization, conversions,quality control, processing,adjustment, reporting,export etc.

■ Light, modular equipmentUse it the way that suitsyou best.

■ All on the polePerfectly balanced. Ideal for stakeout and when surveying for short periodsonly.

■ Pole and minipackMinimum weight in yourhand when surveying forhours on end.

■ On a tripod or pillarFor geodetic control andreference stations.

■ All in the minipackFor 30 cm DGPS, GIS andseismic surveys.

GPS1200 receiversGX1230■ Universal receiver

for all applications■ 12 L1 + 12 L2■ Data logging■ Full RTK and DGPS

capability■ Use as rover

or reference

GX1220■ Data logging■ 12 L1 + 12 L2■ Option: DGPS

GX1210■ Data logging■ 12 L1■ Option: DGPS

GRX1200 Pro■ CORS receiver■ Logging, RTK & DGPS■ Ethernet connectivity

Write programs in GeoC++Although GPS1200 has amultitude of functions, routines and programs, you may still want to work in special ways sometimesfor unusual tasks. Simplywrite your own programs in GeoC++ for GPS1200 tooperate exactly the way yourequire. A further bonus isthat the same programs canoften be used for TPS1200.

Seamless dataflow

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

SmartTrack antennaAlthough small in size, thenew SmartTrack high-gainantenna with sub-millimeterphase center accuracy delivershigh quality measurementseven from low elevationsatellites. A built in groundplane suppresses multipath.

GPS1200’s SmartTrack antenna and receiver technol-ogy deliver high-precisionmeasurements for the mostdemanding GPS tasks. Theantenna is waterproof, lightand rugged, built to survivefalls from the top of a 2 m pole.

Choice of RTK poleCarbon fiber or aluminumpole with adjustable, ergonomic handgrip.

or

LEICA GPS1200 Extremely powerfulYet very easy to use

GPS1200 is loaded with a multitude of features and functions

to meet the many different needs of users all over the world,

yet it is remarkably easy to use.

GPS1200’s graphical operating concept is self-explanatory and guides youstraight to what you need.

You can use the default settings or, if you prefer, you can set GPS1200 to operate, display and outputdata in exactly the way yourequire.

When you use GPS1200,you’ll find that everything is very easy to understand.

Even better, you’ll notice that GPS1200 and TPS1200are fully compatible with thesame CompactFlash cards,data management, displaysand keyboards.

Depending on the jobs youdo, you can switch easilyfrom GPS to TPS and continue working inexactly the same way.

Operate GPS1200 using theQWERTY keyboard or thelarge graphic touch screen,whichever you prefer.

Coding and plan of your work

Define points, lines and areas to build up a plan inthe display as you survey.You see immediately whatyou’ve done. Attach thecodes, attributes and information needed for inputinto your office or mappingsoftware.

System 1200 has all types of toolsand is incredibly versatile.

Graphic view mode

Graphic views show yourwork. Zoom in for details and out for the entire survey.Use the touch screen or key-board to access data relatedto points and objects.

With graphic views you cancheck quickly in the field for completeness and correctness.

Data export in any format

Data can be exported directly from GPS1200 or via LEICA Geo Office in various standard formats or in your own user-definedformats for direct input intoany type of processing, office, CAD or mapping software.

System 1200 interfaces easily tothird-party software packages.

L E I C A S Y S T E M 1 2 0 0

■ Status iconsIndicate the current measurement and operationmodes, recording and battery status, instrumentsettings etc.

■ Definable function keysAllocate commands, functions, displays etc.(whatever you like) tothese keys for immediateaccess.

■ Program menuDirect access to all loadedapplication programs such as survey, stakeout,COGO etc. and optional application programs.

■ Large graphic display1/4 VGA high-resolutionLCD, easy to read in any light. Display and keyboard light up for workin the dark.

■ Touch screenThe controller’s touch screen provides immediate accesswithout using the keyboard.You can view data and information related to points and objects and call up all types of functions directly via the screen. Use the touch screen and/orthe keyboard whichever you prefer.

■ Configurable user menuSet up your own usermenu for the way you andyour crews operate. Showwhat you need and hidethe rest.

■ QWERTY keyboardThe standard QWERTY layout of the controller keyboard facilitates fast,easy input of alphanumericdata and information.

User definable displays

With GPS1200 you can define different displaymasks so that the systemshows exactly what you and your crews want to seewhen surveying in the field.Set the displays according to the jobs you do and theinformation required.

GPS1200 adapts perfectly to your needs.

Data management

The powerful database manages data, files, jobs,quality checks etc. You canview, edit, delete, and search with or without filters. Coordinates of points measured more than onceare averaged provided thatthey lie within specified tolerances.

Surveying is much easier andmore reliable with System 1200.

Application programs

GPS1200 is supplied withmany useful programs suchas Survey, Stakeout, andCOGO. Other programs suchas RoadRunner, ReferenceLine and DTM Stakeout areoptional. You can also writeyour own programs for spe-cial applications in GeoC++.

Most programs run on both TPSand GPS.

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

L E I C A S Y S T E M 1 2 0 0

LEICA GPS1200Superb measurement and RTK performance

SmartCheck

Fast, self-checking +30km RTK

The SmartCheck algorithmsweight and process Smart-Track measurements anddeliver fast, accurate RTK.Centimeter accuracy positionsare available continuously atrates of up to 20 Hz. Integritymonitoring runs in the back-ground resolving the ambi-guities and verifying thecoordinates. Reliability isphenomenal – 99.99% forbaselines up to 30 km – andthe range is outstanding.

Amongst trees and obstructionsWhatever the work, whetherthe receiver is on a pole orvehicle, you’ll find GPS1200RTK to be the perfect tool:■ Initializes within seconds■ Measures amongst trees

and obstructions ■ Position updates

every 0.05 second (20 Hz)■ Latency less than 0.03 second■ Consistent cm-accuracy■ Total reliability

With a suitable communica-tion device, RTK ranges reach 30km or more.

GPS1200 opens up a whole newRTK world, you’ll be amazed atwhat it can do.

User programmable

Write your own programs

Although GPS1200 has routines and programs thatsatisfy the needs of the majority of users, there willalways be customers withspecial requirements for special applications. The solution is easy: simply write your own programs inGeoC++ or contact a LeicaSoftware Center, upload theprograms to the receiver anduse GPS1200 in the way youwant.

For special applicationsWith user programming, GPS1200 can be customizedto operate, compute and output information in exactly the way required. The following are just someof the applications for which programming can be extremely useful:■ Unusual alignments■ Monitoring construction■ Dividing land ■ Computing volumes ■ Machine guidance ■ Special transformations■ Generating special reports

GPS1200 is totally transparent.Program it and use it in the waythat suits you best.

SmartTrack

World leading GPS technology

Clean, reliable, high accuracycode and phase measure-ments are the basis of allGPS work. The better the raw data, the better the performance and the results.GPS1200’s new SmartTrackmeasurement engine andantenna are matched perfectlyto each other for the bestpossible receiver performance:■ Acquisition within seconds■ Excellent signal strength■ Tracking to low elevations■ Suppresses multipath■ Jamming resistant■ Top quality measurements■ Perfect tracking in

dynamic environments■ Totally reliable

And you reap the benefitsWhether used as a referenceor rover, for RTK or DGPS ordata logging, whether on atripod, pole, pillar or vehicle,in open areas or amongstobstructions, you’ll find GPS1200 to be faster, more accurate, more efficient and more reliable than any receiveryou’ve used before.

Thanks to Leica’s newSmartTrack GPS measure-ment technology!

Incredibly versatileUser programmable

Interfaces easily to other devices

ASCII input

Records data from other devices

For certain applications, it isuseful to link measurements,data and information fromother equipment to the GPSdata. GPS1200 accepts andrecords data and informationin the form of ASCII stringsfrom any connected device.

Easy interfacingBar code readers, echosounders, Geiger counters,aerial cameras, tilt sensors,meteorological sensors etc.can be connected easily toGPS1200.■ Use a bar code reader to enter

information during asset management surveys.

■ Combine GPS1200 with a gas detector for gas inspection surveys in non-explosive environments.

■ Link GPS positions to echo sounder depth measurements for hydrographic surveys.

■ Connect tilt and meteorology sensors to the receiver at permanent reference stations.

GPS1200 allocates positionsand times to the data fromconnected equipment.

Combining GPS1200 with otherdevices opens up new excitingpossibilities.

Reference stations

GPS1200 at CORS sites

Organizations in many countries are establishingGPS reference stations. GPS1200 with a SmartTrackantenna or IGS/Dorne &Margolin chokering antennais ideal for a ContinuouslyOperating Reference Station(CORS). It logs data, streams data,outputs RTK and DGPS fortransmission to RTK and GIS rovers, and is perfect for use with GPS SPIDER,Leica’s reference station software.

GPS1200 RTK roverAs GPS1200 accepts all formats (Leica, CMR, RTCM)and outputs all standardmessages (NMEA), GPS1200RTK rovers work perfectlywith all reference station services all over the world.■ With single reference stations■ With networks of stations■ With area corrections (FKP)■ With VRS networks

GPS1200 RTK rovers have everything needed for outstandingperformance with today’s reference station services.

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

Hidden points

Connect a DISTO or Vector

With a LEICA DISTO or LEICAVector or any other suitablehandheld laser rangefinderconnected to GPS1200, youcan measure distances to orfrom objects at which it isimpossible to position theantenna or acquire sufficientsatellites. Using onboardCOGO routines, GPS1200computes and records thepoint coordinates instantly.

Survey inaccessible objectsWhen carrying out detail, title or utility surveys in builtup or wooded areas, therewill always be points andobjects, such as building corners, trees and boundarymarkers, which cannot besurveyed directly with GPS.

The best solution is to use theDISTO, Leica’s inexpensivehandheld miniature rangefind-er. With the latest generationLEICA DISTO plus, you caneven benefit from connectivityto GPS via wireless technology.

GPS1200 does the rest; it computes and records the coordinates for you, fully automatically.

LEICA GPS1200 Technical specifications and system features

GPS1200 receivers GX1230 receiver GX1220 receiver GX1210 receiver GRX1200 Pro CORS receiver

GPS technology SmartTrack SmartTrack SmartTrack SmartTrack

Type Dual frequency Dual frequency Single frequency Dual frequency

Channels 12 L1 + 12 L2 / WAAS / EGNOS 12 L1 + 12 L2 / WAAS / EGNOS 12 L1 / WAAS / EGNOS 12 L1 + 12 L2 / WAAS / EGNOS

RTK Yes, SmartCheck No No Yes (transmit only)

DGPS + WAAS / EGNOS Yes Optional Optional Yes (transmit only)

Status indicators 3 LED indicators: for power, tracking, memory.

Ports 1 power port, 3 serial ports, 1 controller port, 1 antenna port. + 1 power port, 1 ethernet port

Supply voltage, Nominal 12 VDC. Nominal 12 VDC.

Consumption 5.2 W receiver + controller + antenna 4.2 W receiver + antenna

Event input and PPS Optional: Optional: Optional: Standard:

1 PPS output port 1 PPS output port 1 PPS output port 1 PPS output port

2 event input ports 2 event input ports 2 event input ports 1 event input port

1 external oscillator input port

Standard antenna SmartTrack AX1202 SmartTrack AX1202 SmartTrack AX1201 AT504 Dorne & Margolin

Built in groundplane Built in groundplane Built in groundplane Choke Ring

The following apply to all receivers except where stated.

Power supply Two Li-lon 3.8Ah/7.2V mini batteries plug into receiver.

Plug-in Li-Ion batteries Power receiver + controller + SmartTrack antenna

Same for GPS and TPS for about 15 hours (for data logging).

Power receiver + controller + SmartTrack

antenna + low power radio modem or phone for

about 10 hours (for RTK/DGPS).

External power External power input 10.5 V to 28 V.

Weights Receiver 1.20 kg. Controller 0.48 kg.

SmartTrack antenna 0.44 kg.

Plug-in Li-lon battery 0.19 kg.

Carbon fiber pole with SmartTrack antenna

and controller: 1.80 kg.

All on pole: carbon-fiber pole with receiver,

plug-in battery, radio modem, radio antenna,

controller, SmartTrack antenna: 3.60 kg.

Temperature Operation: Receiver –40°C to +65°C

ISO9022 SmartTrack antenna –40°C to +70°C

MIL-STD-810F Controller –30°C to +65°C

Storage: Receiver –40°C to +80°C

SmartTrack antenna –55°C to +85°C

Controller –40°C to +80°C

Humidity Receiver, SmartTrack antenna and controller

ISO9022, MIL-STD-810F Up to 100% humidity.

Protection against water, Receiver, SmartTrack antenna and controller:

dust and sand Waterpoof to 1m temporary submersion.

IP67, MIL-STD-810F Dust tight

Shock/drop onto Receiver: withstands 1m drop onto hard surface.

hard surface SmartTrack antenna and controller: withstand 1.5m

drop onto hard surface.

Topple over on pole Receiver, SmartTrack antenna and controller:

withstand fall if pole topples over.

Vibrations Receiver, SmartTrack antenna and controller:

ISO9022 withstand vibrations on large construction

MIL-STD-810F machines. No loss of lock.

SmartTrack Time needed to acquire all satellites after

Advanced GPS switching on: typically about 50 seconds.

measurement Re-acquisition of satellites after loss of lock

technology (e.g. passing through tunnel):

typically within 1 second.

Very high sensitivity: acquires more than 99% of all

possible observations above 10 degrees elevation.

Very low noise. Robust tracking.

Tracks weak signals to low elevations and

in adverse conditions.

Multipath mitigation. Jamming resistant.

Measurement precision:

Carrier phase on L1: 0.2 mm rms. On L2: 0.2 mm rms.

Code (pseudorange) on L1 and L2: 20 mm rms.

SmartCheck Initialization typically 8 seconds.

Advanced, Position update rate selectable up to 20 Hz.

long range RTK technology Latency < 0.03 secs.

Applies to Range 30 km or more in favorable conditions.

GX1230 only Self checking.

Accuracies:

Horizontal: 10 mm + 1 ppm, kinematic

Vertical: 20 mm + 1 ppm, kinematic

Horizontal: 5 mm + 0.5 ppm, static

Vertical: 10 mm + 0.5 ppm, static

Reliability: 99.99% for baselines up to 30 km.

Formats supported for transmission and reception:

Leica proprietary, CMR, CMR+,

RTCM V2.1/2.2/2.3/3.0.

Reference station RTK rover fully compatible with VRS and

networks Area Correction (FKP) reference station networks.

DGPS DGPS, includes support of WAAS and EGNOS.

GX1230 – standard RTCM V2.1/2.2/2.3/3.0. formats supported for

GX1220 –optional transmission and reception.

GX1210 –optional Baseline rms: typically 25cm rms with suitable

reference station.

Position update rate Applies to RTK, DGPS and navigation positions.

and latency Update rate selectable from 0.05 sec (20Hz)

to 60 secs.

Latency less than 0.03 secs.

NMEA output NMEA 0183 V2.20 and Leica proprietary.

Post-processing with Horizontal: 10 mm + 1 ppm, kinematic

LEICA Geo Office software Vertical: 20 mm + 1 ppm, kinematic

GX1220, GX1230, Horizontal: 5 mm + 0.5 ppm, static

GRX1200, GRX1200 Pro Vertical: 10 mm + 0.5 ppm, static

For long lines with long observations

Horizontal: 3 mm + 0.5 ppm, static

Vertical: 6 mm + 0.5 ppm, static

Notes on performance Figures quoted are for normal to favorable

and on accuracies conditions. Performance and accuracies can

vary depending on number of satellites,

satellite geometry, observation time, ephemeris,

ionosphere, multipath etc.

Detachable controller High contrast, 1/4 VGA display.

RX1210 Touch screen.

11 lines x 32 characters.

Full alphanumeric QWERTY keypad.

Function keys and user definable keys.

Illumination for screen and keys.

Can also be used with TPS1200 for

alphanumeric input and extensive coding.

Operation with controller Via keypad and/or via touch screen.

Same for GPS and TPS Graphical operating concept.

Function keys and user definable keys.

All information displayed.

Displayed information All information displayed: status, tracking,

data logging, database, RTK, DGPS, navigation,

survey, stakeout, quality, timer, power,

geographical, cartesian, grid coordinates etc.

Graphical display of survey Graphical display (plan) of survey. Zooming.

Same for GPS and TPS Can access surveyed points directly via

touch screen.

Stakeout display Graphical with zoom. Digital, polar and orthometric.

Same for GPS and TPS Accuracy: 10 mm + 1 ppm at 20Hz (0.05 sec) update

rate. No degradation with high update rates.

Operation without controller Automatic on switching on. LED status indicators.

For reference stations and static measurements.

Data logging On CompactFlash cards: 32 MB and 256 MB

Same cards used Optional internal memory: 32 MB and 256 MB

for GPS and TPS Recording rate: selectable from 0.05 to 300 secs.

Capacity 32 MB sufficient for:

About 550 hours L1 + L2 data logging at 15 sec rate.

About 2200 hours L1 + L2 data logging at 60 sec rate.

About 45000 RTK points with codes.

Data management User definable job management.

Same for GPS and TPS Point identifiers, coordinates, codes, attributes etc.

Search, filter and display routines.

Multi point averaging.

Five types of coding systems cover all requirements.

Coordinate systems Ellipsoids, projections, geoidal models, coordinate

Same for GPS and TPS transformations, transformation parameters,

country specific coordinate systems.

Application programs Standard: Full range of COGO functions.

Same for GPS and TPS Hidden point.

Optional: RoadRunner, Reference Line,

DTM Stake Out.

Programmable User programmable in GeoC++.

Same for GPS and TPS Users can write and upload programs for their

own special requirements and applications.

Communication One or two of the following devices can be

Data links connected: Radio modem, GSM,

high speed wireless, TDMA.

Different frequencies and/or formats can be

received and transmitted. Time slicing is

supported.

Leica Geosystems AGHeinrich-Wild-Strasse

CH-9435 Heerbrugg(Switzerland)

www.leica-geosystems.com

Total Quality Management – ourcommitment to total customer sat-isfaction.

Find out more about our TQMprogram from your localLeica Geosystems represen-tative.

Illustrations, descriptions and technical specifications are not binding and may change. Printed in Switzerland – Copyright Leica Geosystems AG, Heerbrugg, Switzerland, 2004. 738812en – I.04 – RDV

The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by Leica Geosystems AG is under license. Other trademarks and tradenames are those of their respective owners.

LEICA System 1200 – working together.

Combine GPS and TPS.

Change as required from one to the other.

Use whichever is the most suitable for the job in hand.

Enjoy all the freedom, flexibility and power of System 1200.

LEICA TPS1200 Total StationsProduct brochureArt No. 738 582Online:www.leica-geosystems.com

High performance total stations fully compatible with GPS1200

LEICA TPS1200 Series

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

LEICA System 1200 SoftwareProduct brochureArt No. 738 826Online:www.leica-geosystems.com

Integrated Software for GPS1200 receivers and TPS1200 total stations

LEICA System 1200 – Software

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

Technical PapersSmartTrack GPS Technology

Online:www.leica-geosystems.com

WORKINGTOGETHER

FUNCTIONintegrated

LEICA SYSTEM 1200

Art No. 738 817