Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards...

11

Transcript of Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards...

Page 1: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.
Page 2: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

Legislative Framework

ACT

REGULATION

Codes of

Australian Standards

Industry

Practice

Standards

MaterialsGuidance

Workbook page 3

Page 3: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

Function of the WHS Regulations

The most important function of the WHS

Regulations is to specify the steps that are

required for compliance with the general duties

under the Act

Matters are included in the Regulations in order

to streamline the Act

Workbook page 3

Page 4: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

PRELIMINARY

REPRESENTATION AND PARTICIPATION

GENERAL RISK & WORKPLACE MANAGEMENT

HAZARDOUS WORK

PLANT AND STRUCTURES

What’s covered in the WHS Regulations

Workbook page 4

Page 5: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

CONSTRUCTION WORK

HAZARDOUS CHEMICALS

ASBESTOS

MAJOR HAZARDOUS FACILITIES

MINES

GENERAL

What’s covered in the WHS Regulations

Workbook page 4

Page 6: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

WHS Regulations

Some things may appear to be missingAbrasive

blasting Welding

Some construction hazards e.g.: overhead protective structures,

structural collapse, lowering of materials

Spray Painting

Certificates of competency for pest controllers

Licensing for load shifting equipment

GENERAL

DUTIES

Identification and Management of Risk

What is reasonably practicable - state of knowledgeWorkbook page 5

Page 7: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

Approved Codes of Practice

A practical guide to achieve the standards of health and safety required under the Work Health

and Safety (WHS) Act and Regulations.

Provide duty holders with guidance on effective ways to manage work health and safety risks.

Page 8: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

• Admissible in court proceedings under the WHS Act and Regulations

• May be relied on by courts as evidence of what is known about a hazard, risk or control and in determining what is reasonably practicable

• Designed to be used in conjunction with the WHS Act and Regulations but do not have the same legal implications

• WHS Act and Regulations may be complied with by following another method if it provides an equivalent or higher standard

• An inspector may refer to an approved Code of Practice when issuing an improvement or prohibition notice

What is the legal effect of Codes of Practice?

Page 9: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

WHS Regulations

Codes of Practice

PRIORITY CODESHow to manage work health safety risks

WHS Consultation, Cooperation & Coordination

Managing work environment and facilities

Managing noise and preventing hearing loss at work

Hazardous manual tasks

Confined spaces

How to prevent falls at workplaces

Preparation of safety data sheets for hazardous chemicals

Labelling workplace hazardous chemicals

How to manage and control asbestos in the workplace

How to safely remove asbestos

Page 10: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

First Aid in the Workplace Demolition Work

Managing Risks in Construction Work Spray Painting and Powder Coating

Preventing Falls in Housing Construction Abrasive Blasting

Managing Electrical Risks at the Workplace Welding and Allied Processes

Managing Risks of Hazardous Chemicals

Safe Access in Tree Trimming and Aboriculture

Managing Risks of Plant in the Workplace

Preventing and Managing Fatigue in the Workplace

Safe Design of Building and Structures

Preventing and Responding to Workplace Bullying

Excavation Work

Second Stage Codes of Practice and Guidance Material

Page 11: Legislative Framework ACT REGULATION Codes of Australian Standards Industry Practice Standards Materials Guidance Workbook page 3.

WHS Regulations

Transitional arrangements and WorkCover NSW Codes

Existing NSW Codes of Practice will continue to operate until replaced by national Codes of Practice or guidance materials or revoked

Where NSW has a Code of Practice on issues that are not specifically regulated, these Codes will become guidance material and must be considered when deciding what is “reasonably practicable”