LEDGER STONE

6" x 24" BEACHWALK LEDGER STON

ES

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE

6" x 24" SIERRA LEDGER STONE 76-3266" x 24" SIERRA LEDGER STONE CORNER 76-327

6" x 18" BEACHWALK SIERRA ASSEMBLED CORNER 76-368

| 01 |

6" x 24" INDIAN COAST LEDGER STONE 76-374

6" x 18" INDIAN COAST LEDGER STONE ASSEMBLED CORNER 76-378

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE

| 02 |

6" x 24" BEACHWALK LEDGER STONE 76-3246" x 24" BEACHWALK LEDGER STONE CORNER 76-325

6" x 18" BEACHWALK LEDGER STONE ASSEMBLED CORNER 76-367

6" x 24" AFRICAN DUNE LEDGER STONE 76-373

6" x 18" AFRICAN DUNE LEDGER STONE ASSEMBLED CORNER 76-377

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE

| 03 |

6" x 24" GLACIER LEDGER STONE 76-3446" x 24" GLACIER LEDGER STONE CORNER 76-345

6" x 18" GLACIER LEDGER STONE ASSEMBLED CORNER 76-370

6" x 24" NORDIC CRYSTAL LEDGER STONE 76-376

6" x 18" NORDIC CRYSTAL LEDGER STONE ASSEMBLED CORNER 76-380

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE

6" x 24" CARBON LEDGER STONE 76-3286" x 24" CARBON LEDGER STONE CORNER 76-329

6" x 18" CARBON LEDGER STONE ASSEMBLED CORNER 76-369

| 04 |

6" x 24" ASTRO SILVER LEDGER STONE 76-375

6" x 18" ASTRO SILVER LEDGER STONE ASSEMBLED CORNER 76-379

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE

| 05 |

DESCRIPTION ITEM CODE LBS/BOX PCS/BOX SQFT/BOX BOXES/SKID SQFT/SKID

6" x 24" BEACHWALK LEDGER STONE 76-324 45.71 6 6 24 144

6" x 24" BEACHWALK LEDGER STONE CORNER 76-325 45.00 6 6 24 144

6" x 18" BEACHWALK LEDGER STONE ASSEMBLED CORNER 76-367 32.20 6 n/a 40 240 pcs.

6" x 24" SIERRA LEDGER STONE 76-326 44.21 6 6 24 144

6" x 24" SIERRA LEDGER STONE CORNER 76-327 41.61 6 6 24 144

6" x 18" SIERRA LEDGER STONE ASSEMBLED CORNER 76-368 34.45 6 n/a 40 240 pcs.

6" x 24" CARBON LEDGER STONE 76-328 41.92 6 6 24 144

6" x 24" CARBON LEDGER STONE CORNER 76-329 43.62 6 6 24 144

6" x 18" CARBON LEDGER STONE ASSEMBLED CORNER 76-369 32.22 6 n/a 40 240 pcs.

6" x 24" GLACIER LEDGER STONE 76-344 54.67 6 6 24 144

6" x 24" GLACIER LEDGER STONE CORNER 76-345 44.17 6 6 24 144

6" x 18" GLACIER LEDGER STONE ASSEMBLED CORNER 76-370 40.02 6 n/a 40 240 pcs.

6" x 24" INDIAN COAST LEDGER STONE 76-374 44.08 6 6 48 288

6" x 18" INDIAN COAST LEDGER STONE ASSEMBLED CORNER 76-378 29.11 6 n/a 48 288 pcs.

6" x 24" AFRICAN DUNE LEDGER STONE 76-373 49.48 6 6 48 288

6" x 18" AFRICAN DUNE LEDGER STONE ASSEMBLED CORNER 76-377 28.20 6 n/a 48 288 pcs.

6" x 24" ASTRO SILVER LEDGER STONE 76-375 41.75 6 6 48 288

6" x 18" ASTRO SILVER LEDGER STONE ASSEMBLED CORNER 76-379 32.54 6 n/a 48 288 pcs.

6" x 24" NORDIC CRYSTAL LEDGER STONE 76-376 41.75 6 6 48 288

6" x 18" NORDIC CRYSTAL LEDGER STONE ASSEMBLED CORNER 76-380 44.17 6 n/a 48 288 pcs.

PACKAGING INFORMATION

| ANATOLIA TILE + STONE | ANATOLIATILE.COM || | LEDGER STONE |

LEDGER STONE – CORNER PANEL INSTALLATION

SUBSTRATE REQUIREMENTSFor best bonding results, the surface should be clean, dry, and have open pores for adhesion. Smooth, non-porous or polished surfaces should be avoided to adhere to. Interior installations of LEDGER STONEs could be installed on gypsum drywall or exterior grade plywood for up to 10’ in height. Cement board is recommended for interior walls exceeding 10' in height. For exterior applications, LEDGER STONE can be installed directly onto brick, masonry block, cured concrete, or cement board.

MORTAR RECOMMENDATIONFor all installations, a polymer modifi ed mortar is recommended. For commercial installations, as well as exterior installations over 10' in height, a polymer modifi ed mortar with a latex additive is strongly recommended.

1.1. Corner panels are used to fi nish outside corners with natural edges. Inside corners should be mitered from plain panels.

CORNER PANEL INSTALLATIONPlease follow below steps to achieve a natural hand stacked appearance:

2. Corner panels have natural rock faced ends on both sides and are shaped as shown. They are 24" long and 6" high with approximately one square feet coverage.

3.3. Corner panels should be cut into two pieces at desired length and fi nger joined around the outside corner as shown. One corner panel is needed to complete one linear foot of outside corner.

4. Continue installation by removing one staggered end of the plain ledger stone piece and place adjacent to the installed corner piece to continue same row.

5. Alternate the size of the corner pieces to help stagger the joints. Do not stagger in a brick fashion, but randomly alter the size to conceal the joint patterns.

| 06 |

AB

6" A B

24"

CUT HERE

6"

24"2"

CUT HERE

INSIDE

OUTSIDE