LED RECESSED LIGHTING MODULEmedia.elitelightingusa.com/pdf/flyer_rl_universal_led... ·...
Transcript of LED RECESSED LIGHTING MODULEmedia.elitelightingusa.com/pdf/flyer_rl_universal_led... ·...
RECESSEDLIGHTING MODULE
LED
LASTS UP TO
23 YEARS
(50,000Hours)
5 YEARWARRANTY
SAVE UP TO
$260 IN ENERGY COSTS
of 6” module & save up to $210 in energy costs of 4” module
LED RECESSED LIGHTING MODULELights Everything to Its True Pure Natural Color
www.iuseeliteled.com
FORNEW CONSTRUCTION,REMODEL& RETROFIT APPLICATIONS
DESIGNED FORLIVING SPACES,KITCHEN& BATHROOM/SHOWER
DESIGNED TO FIT IN
RECESSED HOUSINGS 6 5 4 3,000K
Compliant with 2013 Title 24, Part 6 standards
Calculate your choice of LED Module savings using “Pay Back calc-UL-ator“ which can be found on www.iuseeliteled.com
* Comparison based on 50,000 hours of operation, $20/hr labor, 15 min relamp time, $0.11/kWh, and replacement cost of $2/65W BR30 and $6/18W CFL
COST OF OPERATION ( 9 Luminaires installed at 50,000 hours of operation)
Duration of analysis in hours 50,000 50,000 50,000 # of replacement lamps required 24 4 - Total Kilowatts per hour consumed 3,250 1,000 750Total cost of electricity ($0.11 per kWh) $357.50 $110 $82.50Cost of replacement lamps $48 $24 $- Cost of lamp replacement labor $120 $20 $- Total cost over 50k hours $525.50 $154 $82.50LED costs over source $443 $71.50 $-
Typical Application
Cost of Single Luminaire
65W BR30 Lamp 18W CFL Lamp Elite LED Module (RL628-850L)Number of fixtures in a typical space 9 9 9Watts consumed per lamp 65 20 15 Life of lamp (hours) 2,000 12,000 50,000 Cost of each replacement lamp $2 $6 $- Cost of energy per Kilowatt-hour $0.11 $0.11 $0.11 Labor $/hr $20 $20 $20Time required to re-lamp (minutes) 15 15 15
TOTAL COST OVER LED IN A ROOM $3,987 $643.50 $0
COST OF OPERATION
Our new, easy-to-install RL series are the best replacements for your existing CLF or incandescent lamps in 4”, 5” or 6” housings. Designed and engineered for new construction, remodel and retrofits, the RL series delivers high performance LED lighting while consuming very little energy, optimizing your lifetime savings and payback. RL series produce greater light output than a 18W CFL or 65W BR20 while consuming less than 11W of power.
LEDMR16, R30, PAR20, PAR30 Lamps
ENERGY SAVINGS COMPARISON
LIGHTING MODULE
RL428 MODULE50,000HOURS
650 11 83%LUMENS WATT ENERGY
SAVINGS
50,000HOURS
650 11 83%LUMENS WATT ENERGY
SAVINGS
RL428 MODULE
960 50,00015 77%LUMENS HOURSWATT ENERGY
SAVINGS
960 50,00015 70%LUMENS HOURSWATT ENERGY
SAVINGS
960 50,00015 80%LUMENS HOURSWATT ENERGY
SAVINGS
50,000HOURS
1,000 14 85%LUMENS WATT ENERGY
SAVINGS
50,000HOURS
1,000 14 80%LUMENS WATT ENERGY
SAVINGS
50,000HOURS
1,000 14 86%LUMENS WATT ENERGY
SAVINGS
RL628 MODULE
RL628 MODULE
RL628 MODULE
RL670 MODULE
RL670 MODULE
RL670 MODULE
480 50 2,000LUMENS WATT HOURS
MR16 LAMP
604 65 2,000LUMENS WATT HOURS
R30 LAMP
464 50 3,000LUMENS WATT HOURS
752 75 3,000LUMENS WATT HOURS
PAR30 LAMP
PAR30 LAMP
456 50 3,000LUMENS WATT HOURS
PAR20 LAMP
RL6286” UNIVERSAL
RL6706” UNIVERSAL
RL4284” UNIVERSAL
RL628-950L-DIMTR-120-30K-90-W-WH
6” Universal Recessed LED Lighting ModuleCompatible Housings: 5”, 6”Lumens: 960LWattage: 15WCRI: 90+ (Required for 2013 Title 24 Rating) Color Temperature: 30KLifetime: 50,000 hrsFinish: White
RL670-1000L-DIMTR-120-30K-90-W-WH
6” Universal Surface LED Lighting ModuleCompatible Housings: 5”, 6”, Junction BoxLumens: 1,000LWattage: 14WCRI: 85+, 90+ Color Temperature: 30KLifetime: 50,000 hrsFinish: White
RL428-650L-DIMTR-120-30K-90-W-WH
4” Universal Recessed LED Lighting ModuleCompatible Housings: 4”Lumens: 650LWattage: 11WCRI: 90+ (Required for 2013 Title 24 Rating)
Color Temperature: 30KLifetime: 50,000 hrsFinish: White
Now you don’t have to pay a premium for high lighting quality. Elite’s innovative LED retrofit downlight modules deliver bright, beautiful and energy efficient ambient lighting. Now you can achieve even better quality light output than your existing CFL or incandescent lamps with significantly up to 80% less wattage. Each LED module lasts at least 50,000 hours (decades) with virtually no maintenance required. All Elite’s LED retrofit modules deliver zero UV and infrated output and are fully dimmable from 100% to 10% using Triac dimming system/120V.
LED LED LED
RECESSED LIGHTING MODULE
LED
LASTS UP TO
23 YEARS
(50,000 Hours)
SAVE UP TO
$260 IN ENERGY COSTS
of 6” module &save up to $210 in energy costs of 4” module
DESIGNED TO FIT IN
RECESSED HOUSINGS
6, 5, 4
FORNEW CONSTRUCTION,REMODEL& RETROFIT APPLICATIONS
DESIGNED FORLIVING SPACES,KITCHEN& BATHROOM/SHOWER
RL SERIES LEDRECESSED LIGHTING MODULE
Elite LED Lighting for All Living SpacesElite Lighting has emerged as an industry leader in LED lighting solutions. We consistently enhance your living spaces with beautiful, natural looking, energy-efficient lighting. The RL series is our newest, most efficient and advanced LED downlighting system.
RL Series LED Lighting Module,An LED Solution for Every Recessed Application• Creates an inviting, comfortable home with less work. • Shows rich, crisp and warm colors vibrantly and gives a natural, inviting feeling to your family and guests.• Converts an entire room to energy-efficient LED in minutes (2 minutes installation per module)• You won’t have to change our LED lamps again for several years. (50,000 hours lifetime)
www.iuseeliteled.com
RL628 6” Recessed LED Lighting Module
RL428 4” Recessed LED Lighting Module
RL670 6” Surface LED Lighting Module
5 YEARW A R R A N T Y
RECOMMENDED DIMMERS FOR ELITE RL SERIES LED SYSTEMLUTRON DIMMERSINCANDESCENTDiva DVCL-153PSkylark CTCL-153PNova N-600NovaT NT-600Skylark S-600
Ariadni AY-600PNova NTLV-600Nova NLV-600Maestro MRF2-6ND
Toggle Dimmer TGI06-1LWSkylark S-1000Decora 06633-766Decorra 6674
LUTRON CONTROL SYSTEMDIMTRHomeworks HW/LP-RPM-4A-120PHPM-PAGraphic Eye QSRadio RA2 RRD-10NDPHPM-PAELV1-1000
LUTRON CONTROL SYSTEMMAGNETIC LOW VOLTAGENovaNLV-600NovaT NTLV-600Diva DVLV-600PLeviton Dimmer 6613-PL
Provided with universal EDISON socket adapter (BP142) for existing incandescent downlights.
3,000K
Design & EngineeringAll our LED lighting modules are engineered to keep the LED chip at a low temperature for maximum life and efficient operation. The trim is included in the module’s design and there are no additional purchases needed for trims. The included trim is lensed for maximum light distribution and 55° cut-off angle. There are a variety of color options available for the trims, matching your furniture and interior design.
Energy EfficiencyThe energy consumed is 75% less than the incandescent.
Easy installationThe Elite LED installs into most 4”, 5” and 6” recessed housings. Mounting is secured by torsion springs, and electrical connection is made via an incandescent socket or GU24 socket adapter. This extremely simple concept allows for the installation of Elite LED luminaries in most 4”, 5” and 6” incandescent downlight housings.
W-WHWhite White
P-BKBlack Black
BZ-BZBronze Bronze
CP-CPCopper Copper
SN-SNSatin Nickel
CL-WHClear White
CL-CHClear Chrome
SN-SNSatin Nickel
Deliver 500 to 1200 lumens with a superior optical design that yields productive beam angles, excellent cutoff and low glare.
Other LED Recessed Modules from Elite Lighting
Housing Fit: 4”, 5”, 6”Lumens: 500L to 1200LWattage: as low as 10WCRI: 85+, 90+ (Required for 2013 Title 24 Rating) Color Temperature: 27K, 30K, 35K, 40K, 50KLifetime: Reported L70 lifetime is >50,000hrsWarranty: 5 YearsUV Output: ZeroInfrared Output: Virtually noneDimmable: Down to 10%Dimming Option: Triac, 0-10VVoltage: 120V, 277V
10watts
500LUMENS4 IN
CH
RL400series
4” LED Retrofit Module - Lensed Baffle/Reflector/Baffle Wall Wash/Reflector Wall Wash
5” LED Retrofit Module - Lensed Baffle/Reflector/Baffle Wall Wash/Reflector Wall Wash
6” LED Retrofit Module - Lensed Baffle/Reflector/Baffle Wall Wash/Reflector Wall Wash
6” Universal Adjustable LED Retrofit Module - Lensed Baffle
6”/5” Universal iFit LED Retrofit Module - Lensed Baffle
Trim Color Options
NEW
14watts
750LUMENS
NEW6 or 5 INC
H
RL625
12watts
650LUMENS
16watts
900LUMENS
14watts
750LUMENS
16watts
900LUMENS
20watts
1200LUMENS
5RL500
series
INC
H
6RL600
series
INC
H
14watts
750LUMENSIN
CH6
RL663
RL430
RL530
RL630
RL407
RL507
RL607
RL411
RL511
RL611
W-WHWhite White
SN-WHSatin White
RG-PBGold Polish Brass
BZ-BZBronze Bronze
CP-CPCopper Copper
MB-WHBlack White
RG-WHGold White
MB-BKBlack Black
Elite Lighting Compatible Housings for Use with Dimmable RL series 6”, 5” & 4” LED Lighting Module
IC HOUSING NON-IC HOUSINGNEW CONSTRUCTION REMODEL NEW CONSTRUCTION REMODEL
6” 5” 6” 5” 6” 5” 6” 5”LD6IC-AT-DIMTR-120 LD5IC-AT-DIMTR-120 LD6RIC-AT-DIMTR-120 LD5RIC-AT-DIMTR-120 LD6-AT-DIMTR-120 LD5-AT-DIMTR-120 LD6R-AT-DIMTR-120 LD5R-AT-DIMTR-120
RL628-950L-DIMTR-120-30K-90-W-WH • • • • • • • •RL670-1000L-DIMTR-120-30K-90-W-WH • • • • • • • •
SHALLOW NEW CONSTRUCTION SHALLOW REMODEL6” 5” 6” 5”
LD26IC-DIMTR-120 LD25IC-DIMTR-120 LD26RIC-DIMTR-120 LD25RIC-DIMTR-120
RL628-950L-DIMTR-120-30K-90-W-WH • • • •RL670-1000L-DIMTR-120-30K-90-W-WH • • • •
4” IC HOUSING 4” NON-IC HOUSINGNEW CONSTRUCTION REMODEL NEW CONSTRUCTION REMODEL
LD4IC-AT-DIMTR-120 LD4RIC-AT-DIMTR-120 LD4-AT-DIMTR-120 LD4R-AT-DIMTR-120
RL428-650L-DIMTR-120-30K-90-W-WH • • • •
ELITE LED LIGHTINGwww.iuseeliteled.com
How to specify a part number when ordering(Ordering Housing with LED Lighting Module) Example: LD6IC-AT-DIMTR-RL670-1000L-DIMTR-120-30K-90-W-WH(Ordering LED Lighting Module only) Example: RL670-1000L-DIMTR-120-30K-90-W-WH
4” HOUSING TYPEo LD4IC-AT-DIMTR-120 o LD4-AT-DIMTR-120o LD4RIC-AT-DIMTR-120 o LD4R-AT-DIMTR-120
MODULE TYPE 650L SERIES CCT CRI FINISH OPTION
RL428(4” LENSED REFLECTOR)
o 650L-DIMTR-120 o 30K o 90+ o W-WH o GU24SA GU24 SOCKET ADAPTER
MODULE TYPE 950L SERIES CCT CRI FINISH OPTIONRL628(6” AND 5” LENSED REFLECTOR)
o 950L-DIMTR-120 o 30K o 90+ o W-WH o GU24SA GU24 SOCKET ADAPTER
6” HOUSING TYPE 5” HOUSING TYPEo LD6IC-AT-DIMTR-120 o LD5IC-AT-DIMTR-120o LD6RIC-AT-DIMTR-120 o LD5RIC-AT-DIMTR-120o LD6-AT-DIMTR-120 o LD5-AT-DIMTR-120o LD6R-AT-DIMTR-120 o LD5R-AT-DIMTR-120o LD26IC-AT-DIMTR-120 o LD25IC-AT-DIMTR-120o LD26RIC-AT-DIMTR-120 o LD25RIC-AT-DIMTR-120
MODULE TYPE 1000L SERIES CCT CRI FINISH OPTIONRL670(6” AND 5” LENSED SURFACE)
o 1000L-DIMTR-120 o 30K o 85+o 90+
o W-WH o GU24SA GU24 SOCKET ADAPTER
HOUSING LIGHTING MODULE
RL670-1000L-DIMTR-120-30K-90-W-WH
JUNCTION BOX (MINIMUM DIMENSION REQUIRED)
Height: 1-1/2”, Length: 3-7/8”, Diameter: 4-3/4”
Quick Installation in less than 2 minutes
RL Series LED Lighting Module: The best replacement for your existing lamp
INSTALLATION SYSTEM:• Comes with industry standard torsion springs or mounting clips that can be adjusted to fit in most junction boxes and most 5” and 6” housings. Custom designed bracket included for mounting in standard size junction box.
HOW TO INSTALL:Insert V springs into can and press trim to ceiling.
INSTALLATION SYSTEM:• EZ connector to use with special high efficacy housing or Edison base adapter for retrofitting into existing 5” or 6” Incandescent housings.• Utilizes industry standard V springs* (EDISON socket adapter (BP142) is provided for existing incandescent downlights.)
HOW TO INSTALL:Insert V springs into can and press trim to ceiling.
4.6”
7.4”
2”
INSTALLATION SYSTEM:• Utilizes industry standard friction blades, installs in most 4” incandescent housings. Insert friction blades into can and press trim to ceiling.* (EDISON socket adapter (BP142) is provided for existing incandescent downlights.)
HOW TO INSTALL:Socket adapter (BP142) removes from module, allowing installation to be quick and easy. Simply screw in the adapter and plug in the module. Turning off the entire module is not required.
4.9”
3.4”
1.24”
Fits square J-Box with min. 2.125” depth
3”
2-5/16”
7-3/8”
RL628 RL670 RL428
R30 Lamp
Before
RL628 LED Module
Elite’s innovative LED lighting modules deliver the brightest, most beautiful and most energy-efficient ambient lighting to replace any lamp type on your existing fixture. After
• Main Office: Los Angeles, CA• WWW.IUSEELITE.COM • Tel: 1-323-888-1973 / 1-877-375-5555 • Fax: 1-323-888-1977 / 1-877-375-3333© Copyright 2014. Elite Lighting. All Rights Reserved.
WWW.IUSEELITE.COM WWW.IUSEELITELED.COM WWW.IUSEFUSION.COMWWW.M A X I L UM E . C OM WWW. O R A C L E L I G H T I N G . C OM
The products shown in this catalog are covered by US and international patents. Specifications are subject to change without prior notice.Elite Lighting reserves the right to make any changes in the design, construction and listing approval of the products listed in this catalog which may be required by law or by the rules of any regulatory body or at its discretion.Dimensions and specifications are subject to change without prior notice.Not responsible for any typographical error.Wattage and specifications may be different for products supplied in CANADA.Rev2.0-2014
ELITE LIGHTING CORP.
2013 Title 24, Part 6 Requirements:RESIDENTIAL INDOOR LIGHTING REQUIREMENTSThe 2013 residential code increases energy efficiency standards for skylights and windows, and it updates and clarifies requirements for lighting in kitchens, bathrooms, garages, utility rooms, and other spaces. The new mandatory requirements are outlined in this section.
HIGH EFFICACY CRITERIATo qualify as high-efficacy, luminaires must be certified to the California Energy Commission. Luminaires that can accept low-efficacy lamps and LED luminaires that have not been certified do not qualify as high efficacy. With the exception of decorative, monochromatic LEDs, Joint Appendix JA8 requires that LED luminaires designed for indoor residential use have a minimum CRI of 90 and a CCT of 2700K–4000K in order to qualify as high efficacy. Full criteria are in Table 150.0-Aand Joint Appendix JA8.
BATHROOMSSection 150.0(k) requires at least one high-efficacy luminaire in each bathroom. All other lighting must be high efficacy or controlled by vacancy sensors.
KITCHENSA minimum of 50% of the total rated wattage of permanently installed lighting in kitchens must be high-efficacy lighting.
GARAGES, LAUNDRY ROOMS AND UTILITY ROOMSLighting installed in attached and detached garages, laundry rooms and utility rooms must be high-efficacy and controlled by a vacancy sensor.
OTHER AREASLighting installed in any rooms or areas other than those above must be high efficacy or must be controlled by either dimmers or vacancy sensors.1
LED LIGHTING SYSTEMLED lighting systems are a new, high-efficacy option for Title 24, Part 6.To be considered a high-efficacy luminaire, an LED lighting system must meet the efficacy requirements provided, in addition to being certified to the Energy Commission. LED lighting systems that are not certified to the Energy Commission are considered low-efficacy lighting.
LED TRIM COMPLIANCE REQUIREMENTSAn LED trim is a one-piece integral unit containing the power supply, transformer, heat sink, and LED circuit board. To qualify an LED trim as high efficacy, the LED trim and housing must meet the following conditions:
1. The trim must be certified to the Energy Commission according to the high-efficacy standards. 2. The trim must be hardwired directly into the luminaire housing. Wiring may include any kind of midline connector between LED trim and wire ends, but must not include a screw-base socket configuration.3. The housing must not contain a screw-base socket.4. No screw-base adaptors may be used.
ENERGY STAR LABELThe ENERGY STAR label guarantees a minimum standard of quality as well as energy performance. Many ENERGY STAR brand products will meet Title 24, Part 6 code; however, not all products are guaranteed to be Title 24,Part 6-compliant. ENERGY STAR is a national brand, and Title 24 is a California regulation.
AIRTIGHT FIXTURE LABELTitle 24, Part 6 requires that recessed fixtures installed in an insulated ceiling be certified airtight in accordance with ASTM E283.1
≤ 5 30 lm/W>5W- 15W 45 lm/W>15W-40W 60 lm/W>40W 90 lm/W
1 - copyright © The Regents of the University of California, Davis Campus, California Lighting Technology Center, 2005-2014 all rights reserved