LED Quick Reference Card

AdvancedBionics.com

028-M056-03 ©2011 Advanced Bionics, LLC and its affiliates. All rights reserved.

LED Quick Reference Card

Orange BatteryStatus

Mic TestMode

When a PowerCel is inserted onto theprocessor module, the ORANGE LEDwill blink as follows:• 3 to 4 quick flashes indicate that the PowerCel is fully charged.• 2 quick flashes indicate that the PowerCel is sufficiently charged to power the system.• 1 quick flash indicates that the PowerCel charge is nearly depleted.• No flash indicates that the battery must be changed immediately.

Steady GREEN light indicates an emptyprogram slot available for mic testing.

No

No

Yes

No

No

YesNo

123

Recipient’s Name:

Right EarLeft Ear

Col

or

Har

mon

y LE

DFu

ncti

onal

D

escr

ipti

on

Tur

ned

On?

Prog

ram

mab

le

Prog

ram

#

Feat

ure

Red CommunicationStatus

IntelliLink™

ErrorConditions

The RED light blinks at 1-second intervals indicating no lock with implant.

The RED light blinks rapidly to indicate a mismatch between the processor and implant.

Steady RED light indicates that an error condition has occurred. Remove the PowerCel and reinsert it to reset the processor.

No

No

Green

Low BatteryIndicator

ChangeBatteryIndicator

Mic / SystemStatus

When the PowerCel is near depletion,a steady ORANGE light will illuminateindicating that it is time to change thePowerCel. Once the battery is fullydepleted, no light will emit from theprocessor, and no sound will betransmitted to the implant. ReplacePowerCel as soon as possible.

When the PowerCel is depleted to thepoint that it is unable to supportstimulation but not completelydepleted, the ORANGE light will blinktwice every 3 seconds, and no soundwill be transmitted to the implant.

Flashes in response to loud sounds.The GREEN light will NOT flicker in response to loud sounds if the built-in telecoil is enabled and/or when AGC is disabled.

Yes

Yes

Yes

YesNo

YesNo

YesNo

123

123

123