LED Lighting Solutions and Company Overview. The Objectives LED Lighting Systems What are LEDs? Why...
-
Upload
jeanette-garritson -
Category
Documents
-
view
218 -
download
0
Transcript of LED Lighting Solutions and Company Overview. The Objectives LED Lighting Systems What are LEDs? Why...
LED Lighting Solutions and Company Overview
The Objectives
LED Lighting Systems
• What are LEDs?
• Why LED Lighting? Benefits of switching from Incandescent and CFL Lights to LEDs; a head-to-head comparison.
• Uses and Applications of LED lights
Why Instapower?
• Instapower’s Expertise in providing LED Energy Efficient Lighting solutions.
• About Instapower.
Products and Projects
• Instapower’s Diverse Product Lines.
• Projects and Installations
Key Presentation Objectives
LED Lighting Systems Types of LEDs
The main types of LEDs are miniature, mid-range and high power. They are produced in a variety of shapes and sizes. The 5mm cylindrical package (red, fifth from the left) is the most common. The colour of the plastic lens is often the same as the actual color of light emitted, but not always.
Miniature LEDs:
• Mostly single-die LEDs used as indicators• Come in various sizes from 2mm to 8mm, through –hole and surface mount packages• They usually do not use a separate heat sink
Mid-range LEDs:
• Medium-power LEDs are often through-hole-mounted and used when an output of a few lumen is needed.• They sometimes have the diode mounted to four leads (two cathode leads, two anode leads) for better heat conduction and carry an integrated lens• Most commonly used in light panels, emergency lighting and automotive tail-lights
High-Power (HP) LEDs:
• HPLEDs can be driven at currents from hundreds of mA to more than an Ampere.• Some can emit over a thousand lumens.• HPLEDs are mounted on a heat sink to allow for heat dissipation.• One HPLED can often replace an incandescent bulb in a torch, and can be set in an array to form a powerful LED Lamp.
LEDs - 8 mm, 5 mm & 3 mm with a wooden match-stick for scale
LED Lighting Systems LED Driver
The LED driver is an electronic circuit which keeps the current constant despite fluctuations in voltage. In LEDs, current increases very quickly as voltage increases across them. So, an LED driver must be employed to control the input current to the LED.
LED Lighting Systems
90%
90%
90%
LED at real Tj
Optic
Driver
Best Case 120x0.9x0.9x0.9=87.48lm/w
*More than 40% increase in lumens compared to FTLs
LED Lighting Systems
Rise in temperature of the Secondary heat sink is more than 20°C of the ambient.
Technology Heat Emission/ Hour
LED 20.4 btu’sCFLS 51.2 btu’s
HID 150.2 btu’s
Incandescent Bulb 204.8 btu’s
Halogens 239 btu’s
LED Lighting Systems Why LED Lighting?
Light Emitting Diodes (LEDs)
Compact Fluorescents (CFLs)
High Intensity Discharge (HID)
Halogens Incandescent Light Bulbs
Life Span (average) 50,000 hours 8,000 hours 25,000 hours 4,000 - 8,000 hours 1,200 hours
Electricity consumption (in watts for 60 watt incandescent bulb equivalent)
6-8 watts 13-15 watts 44 watts 70 watts 60 watts
Contain Toxins? No Yes – Mercury harmful for humans and environment
Yes - Xenon, Metallic Halides, Argon
Yes - Halogen Gas No
RoHS Compliant Yes No Yes Yes Yes
Temperature sensitivity None Yes may not work under -10 ° F or over 120 ° F
Yes Some Some
Heat emission 20.4 btu’s/hour 51.2 btu’s/hour 150.2 btu’s/hour 239 btu’s/hour 204.8 btu’s/hour
Frequent on/off cycling No effect Shortens lifespan Shortens lifespan Some effect Some effect
Turns on instantly Yes Slight delay Slight delay Slight delay Yes
Durability Very durable can handle jarring and bumping
Not very durable glass can break easily
Not very Durable Not very Durable Not very durableglass or filament can break easily
Why LED Lighting?
• Efficiency:
LEDs emit more light per watt than incandescent light bulbs. Their efficiency is not affected by shape and size, unlike fluorescent light bulbs or tubes.
• Color:
LEDs can emit light of an intended color without using any color filters as traditional lighting methods need. This is more efficient and can lower initial costs.
• Size:
LEDs can be very small (smaller than 2mm) and are easily populated onto printed circuit boards.
• Toxicity:
LEDs do not contain mercury unlike fluorescent lamps and tubes.
LED Lighting Systems Uses and Applications
LED Applications
InteriorLighting
ExteriorLighting
ArchitecturalLighting
Street LightsSolar Lights
SpotlightsEmergency Lights
DisplayBacklighting
From NASA using LED lights to grow plants in space to LED bulbs used at private residences, LED lighting solutions are available for every use that CFL and Incandescent lights have been used for till date…and more.
• Bulbs• Downlighters• Solar home lights• Ceiling lights• Tubelights• Streetlights / Solar Streelights• Flood lights/Façade lights• Aviation warning lights• Traffic Signals• High bay industrial lights• Billboard lights for advertising• Moving display boards• Color changing architectural lights• Solar road studs / Solar delineators
Energy Saving Calculator Comparison between LED lights and existing light fittings
Name of the LED Product
Light load in
Watt (LED)
Hours of use
in a day
Existing Light
load in Watt
Electricity Cost per unit in
Number of units
consumed per Annum for the
LED Load
Electricity cost in per annum for LED Load
Number of Units
consumed per annum for
Normal Light Load
Electricity cost in per annum for
Normal light Load
Annual Savings in
(Normal Lights- LED lights)
Initial cost in
for normal fitting
Maintenance Cost in per annum for
Normal Lights
Initial cost of
LED fitting
ROI to customer
per annum
LED Down Light of 18 Watt D-LITE LX replacing 2X18
Watt of CFL
18 12 40 6 78.84 473.04 175.2 1051.2 578.16 2480 1000 5800 47.53494
LED Tube Light of 2X20 Watt Lite
Master replacing 2X40 Watt of FTL
Tube
40 12 96 6 175.2 1051.2 420.48 2522.88 1471.68 1960 1000 6000 61.180198
LED Celling Light of 30 Watt
replacing 4X14 Watt of FTL Tube
30 12 70 6 131.4 788.4 306.6 1839.6 1051.2 4500 1200 9900 41.688889
The ROI is less than 2 years and The Organization would start earning by implementing LED Lights from 3rd year. These fittings are FIT IT FORGET IT systems. There is no replacement or maintenance required for the next 10 years. There is no heating in the products and therefore reduces the AC bills. The life of the product is more than 10 years and Instapower offer a 5 year warranty on the product. There is no mercury in LED and therefore environmentally friendly. LEDs promote the Green Technology The reduction in the AC bill which will result due to implementation of LED's has not been considered by us
Energy Saving Calculator Comparison between LED lights and existing light fittings
Name of the LED Product
Light load in
Watt (LED)
Hours of use
in a day
Existing Light
load in Watt
Electricity Cost per unit in
Number of units
consumed per Annum for the
LED Load
Electricity cost in per annum for LED Load
Number of Units
consumed per annum for
Normal Light Load
Electricity cost in per annum for
Normal light Load
Annual Savings in
(Normal Lights- LED lights)
Initial cost in
for normal fitting
Maintenance Cost in per annum for
Normal Lights
Initial cost of
LED fitting
ROI to customer
per annum
LED Street Light of 120 Watt Zenith
replacing 250 Watt of HPSV
120 12 295 6 525.6 3153.6 1292.1 7752.6 4599 14600 2000 30000 42.85065
LED Street Light of 36 Watt replacing 70 Watt of HPSV
36 12 96 6 157.68 946.08 394.2 2365.2 1419.12 6000 2000 15000 37.99022
The ROI is less than 2 years and The Organization would start earning by implementing LED Lights from 3rd year. These fittings are FIT IT FORGET IT systems. There is no replacement or maintenance required. The life of the product is more than 10 years and Instapower offers a 5 year warranty on the product. There is no mercury in LED and therefore environmentally friendly. LEDs promote the Green Technology.
Why Instapower? Pioneers of LED Lighting
• Pioneers of LED lighting concept in India
• A TUV certified ISO 9001 and 14001 organization
• Recognized as an ESCO organization by The Bureau of Energy Efficiency, Government of India
• Over 100 LED products manufactured indigenously
• Over 300,000 installations of LED lights in India and abroad
“To provide Innovative, High Quality and Cost Effective LED Energy Efficient Lighting Solutions – for residential and institutional use – and boosting adoption of LED’s illumination in India and around the world as part of our Go Green With LED mission.”
Our VisionA leading name in power electronics for over two decades, Instapower diversified into manufacturing energy efficient lighting systems using LEDs in 2003. With a strong R&D base at Gurgaon and an over 30,000 sq ft. state-of-the-art manufacturing facility at Roorkee, it has a vast, indigenously manufactured product range that is well accepted within India and the rest of the world (exports to over 25 countries).
The Organization
• A state-of-the-art 30,000 sq ft manufacturing andtesting unit at Roorkee, Uttarakhand.• Employing over 200 skilled personnel
Our Vision
The Organization
• An R&D wing in Udyog Vihar, Gurgaon
The Organization
• Registered office in New Delhi
The Organization - Certifications
AAI Udaipur Completion Certificate, AAI, Udaipur
The Organization - Certifications
RDSO Approval For Emergency LightRDSO Approval Integrated LED Signal
The Organization - Certifications
BHEL ApprovalCPWD Approval
The Organization - Certifications
ISO 14001: 2004 ISO 9001: 2008
The Organization - Certifications
DSIR Certification ESCO, BEE Approval
The Organization
• Exporting to over 25 countries worldwide
• Afghanistan• Argentina• Australia• Bangladesh• Denmark• Egypt• Gabon• Ghana• Greece• Kuwait• Libya• Malaysia• Mauritius• Nepal• Nigeria• Oman• Pakistan• Saudi Arabia• Spain• Sri Lanka• Sudan• Tanzania• UAE• UK• USA• Vietnam
Why Instapower? Value Proposition
The Instapower Value Proposition is built over 4 key elements
Strong R&D Initiatives
100% Backward
Integration
Competitive Pricing
PAN India Sales
Network
• Customization of products as per client’s requirements.• Ensure quality checks at every level.• Ensures timely deliveries.
• Effective Sales and Service support anywhere in India.
• Product and design innovations to adapt to local conditions.• Superior product offerings using latest and improved technologies
• Manufacturing facility in the excise-free state of Uttarakhand.• Constant technological innovation by in-house R&D using better and more cost effective technologies.
Why Instapower? Innovation through R&D
Instapower has a strong R&D wing that works diligently at harnessing technology and towards product and design innovation to meet the diverse needs of its various clients for energy efficient lighting systems. It has filed for over 10 product patents and 30 design patents in various categories of LED lighting systems. A few are listed below:
Product name Patent no. Design no. Date
Light with Ceiling Fixture 3739 225771 13-11-2009
Light with Ceiling Fixture 3736 225773 13-11-2009
Ceiling Light 0210 225775 13-11-2009
Aviation Light 1043 223600 02-07-2009
LED Street Light 6141 227243 16-02-2010
LED Bulb 6263 227244 16-02-2010
LED Street Light 6140 227246 16-02-2010
Lamp Shade 5935 228618 16-04-2010
Why Instapower? Commendations & Recognitions
Instapower has received several Commendations and Recognitions for its unrelenting efforts in introducing and propagating the use of LED based Energy Efficient Lighting Systems in India.
Received commendation from Smt. Shiela Dixit, Hon’ble Chief Minister of Delhi, for un-wavering commitment towards development and promotion of energy efficient technologies.
Products tested by various prominent laboratories such as National Physical Laboratory (NPL), ERDA, ERTL, IIT, ARAI (Pune). These are the country’s top laboratories and have international recognition.
LED Lighting products approved by Military Engineering Services. Instapower is the only company till date to be awarded such an approval at an all India level.
Instapower Product has been approved by RDSO, BHEL, PGCIL, NTPC at and all india level .
Why Instapower? Board of Directors
Board of Directors• Retired as the first Director General of C.P.W.D in 1979.• Was Chairman and Managing Director of NBCC besides being an advisor to several government organizations.• Member of the Governing Body of Delhi Public School Society, which runs 140 schools in India and abroad.
V. R. VaishChairman
• Alumnus of IIT-Delhi, he is a first generation entrepreneur. Also a fellow of the Institution of Lighting Engineers.• Founded Instapower in 1990, manufacturing power conditioning equipments as UPS and Invertors.• Diversified into manufacturing LED Lighting Systems in 2003.
H. R. VaishManaging Director
• A fellow member of Institute of Chartered Accountants in England & Wales and ICA of India.• Retired as Senior VP – Allied Businesses, Corporate and Government Affairs at Ranbaxy• A keen spokesperson for the pharmaceutical industry at various trade forums.
B. K. RaizadaDirector
• An M.Com, L.L.B., MBA-Finance, C.A.I.I.B., he is a leading practicing advocate.• Former legal advisor to IFCI.
S. S. L. GuptaDirector
• An Electronics and Communications Engineer from Punjab Engineering College, Chandigarh.• Fellow of Institute of Electronics & Telecommunication Engineers (India) for over 20 years.• Retired in 2008 as Wireless Adviser to Government of India, Ministry of Communication & IT.
P. K. GargDirector
• An Electrical Engineering Alumnus from IIT-Delhi.• Professor and Dean at G. L. Bajaj Institute of Technology & Management, Greater Noida.• Over 12 years of teaching experience and over 20 years of Industry experience.
K. S. MehtaDirector
Products and Projects Product Lines and applications
InstapowerLED Product Lines
Indoor Lights
Outdoor Lights
Architectural Lights
Aviation Lights
Landscape Lights
Display Boards
Road Safety Lights
-Theme based lighting- Garden lighting- Decorative lighting- Building façade lighting
Stairs - Pathways -
Planters -Water bodies -
Backlit signage -3D Character signage -
Destination Boards -
- Aviation warning lights (Low/Medium/High Intensity)
Traffic Lights -Traffic Blinkers -
- General Lighting- Street Lights- Façade Lighting- Flood Lights-Security Lights- Lanterns
- Recessed spot/ceiling Lights- Surface mounted ceiling Lights- Ceiling suspended Lights- General Lighting- Emergency Lights- Edge lit Indoor Signage
Products and Projects Sampling of product portfolio
Product specifications and technical details can be viewed on www.instapower.comor ask for our Product Catalogue 2011
Products and Projects Projects and Installations
Delhi Secretariat Landscape Lights, Architectural Lights, Outdoor Lights
Rail BhawanArchitectural Lights,
Outdoor Lights
BHELIndoor LIghts
Products and Projects Projects and Installations
Solar Power Medium Intensity Aviation Light at Udaipur AirportNano Zenith Solar
Products and Projects Projects and Installations
Signage Board - Similar boards can be fabricated for outside the airports.
Products and Projects Projects and Installations
ONGC Indoor Lights
Apollo HospitalIndoor Lights,
Architectural Lights,Landscape Lights
Safdarjung HospitalIndoor Lights,
Architectural Lights,Landscape Lights
Advantages of using LED Lights by The Organization
• The LED Display Boards manufactured by us indigenously in India unlike others suppliers who are
importing in SKD units.
• It will reduce the power consumption by 60% and therefore saving of electricity costs.
• It comes with a 3 year warranty. ROI is within 3 years.
• The life of the product is more than 10 years. Fit it Forget it.
• The power backup load (Generator), Cable Size will reduce significantly.
• For Indoor lighting the AC load will reduce and the Air conditioning will become more effective.
• Huge saving in operational cost and maintenance cost. In case of Solar Installations the battery
and solar size will reduce significantly.
• The common area load can be directly connected to Solar Panels as per the Green Building norms.
• There is no mercury content therefore Environment friendly. Promotes Green Technology
Key Customers
Contact UsCorporate Office :
457, Udyog Vihar, Phase - V, Gurgaon - 122 016, HaryanaT : +91 124 412 4000 F : +91 124 412 4034
Registered Office :
S-19, Panchshila Park,New Delhi – 110 017T : +91 11 2604 5000 F : +91 11 2601 4770
Manufacturing Unit :
103, Raipur Industrial Area,Bhagwanpur, 15.5 Km.Roorkee-Dehradun Highway,Uttarakhand – 247 661