LED LIGHTING POWER CONVERTER - KUMHO ELECTRIC · 2015-09-16 · LED LIGHTING POWER CONVERTER...

LED LIGHTING POWER CONVERTER

LED LIGHTING POWER

CONVERTER UNIVERSAL


Product Features

· Active power-factor compensation circuits is built-in · Excellent quality and durability · Prevent the risk of fire by avoiding use of explosive components · Unused cooling fan (reduce noise, extend product life cycle) · Capacity of maintaining low temperature due to best heat dissipating system · Replacement cost saving due to excellent durability (50,000hours) · Designed as IP67 to use for indoor and outdoor · Over 90% of high efficiency products · Qualified to Industrial LED lighting and LED street lighting


Appearance

Product Specifications

MODEL INPUT OUTPUT [48V / 36V / 30V] SHAPE

1

60w LPS-FUIN60WXXV-V1

100-277Vac~

1.12A / 1.50A / 1.80A

172*67*39mm 70w LPS-FUIN70WXXV-V1 1.31A / 1.75A / 2.10A

80w LPS-FUIN80WXXV-V1 1.50A / 2.00A / 2.40A

2


223*67*39mm




3 200w LPS-FUIN200WXXV-V1 3.75A / 5.00A / 6.00A 226*67*39mm

1 2 3


Electrical and Photometric Data

Highlights (60W)

Model LPS-FUIN60W48V-V1 LPS-FUIN60W36V-V1 LPS-FUIN60W30V-V1

POWER

Output Voltage 48V 36V 30V

Rated Current 1.12A 1.50A 1.80A

Rated Power 54W

Line Regulation ±2%

Load Regulation ±1%

INPUT

Voltage Range 100 ~ 277VAC

Frequency Range 47 ~ 63Hz

Power Factor >0.97/230VAC @100% Load,

>0.98/115VAC @100% Load

Efficiency(Typ.) 90% / 230VAC 88% / 115VAC

AC Current 0.27A/230VAC 0.53A/115VAC

Rated Power 60W ±5%

Inrush Current 25A/230VAC

Leakage Current <0.2㎃/115VAC <0.4㎃/230VAC

PROTECTION

Over Current 2.0A 3.0A 3.5A

Short Circuit Hiccup mode, recovers automatically after fault condition is remove

Over Voltage 54~60V 41~46V 41~46V

ENVIROMENT

Operating Temperature -35℃ ~ 60℃ (Refer to output load derating curve)

Operating Humidity 20 ~ 90% RH

Storage Temperature ,

Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC

Safety Standards EN61347-1, EN61347-2-13, IP67 approved

EMI Compliance to EN55015, EN55022 Class B

Harmonic Current Compliance to EN6100-3.2 Class C,, EN6100-3-3

EMS Immunity Compliance to EN6100-4-2,3,4,5,6,8,11, EN61547

ETC


Highlights (70W)


POWER



Rated Power 63W



INPUT



Power Factor >0.97/230VAC @100% Load, >0.98/115VAC @100% Load

Efficiency(Typ.) 90% /230VAC 88% /115VAC





PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC


EMI Compliance to EN55015, EN55022 ClassB

Harmonic Current Compliance to EN6100-3.2 ClassC,, EN6100-3-3


ETC



Highlights (80W)


POWER



Rated Power 72W



INPUT









PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC




Highlights (90W)


POWER



Rated Power 81W



INPUT









PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC



Highlights (100W)


POWER



Rated Power 90W



INPUT









PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC



Highlights (120W)


POWER



Rated Power 108W



INPUT









PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC



Highlights (150W)


POWER



Rated Power 135W



INPUT









PROTECTION




ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC



Highlights (200W)


POWER


Rated Current 3.75A 5A 6A

Rated Power 180W



INPUT





AC Current 0.90/230VAC 1.78A/115VAC




PROTECTION

Over Current 4.5A 6A 7A



ENVIROMENT




Humidity -40 ~ 80℃, 10 ~ 95% RH

SAFETY &

EMC





ETC


Pre-Installation Checklist products

Identification of Input Power

- Verify ballasts and input power

- Verify if input power is supplied constantly

Check for leakage of electricity and grounded

- Check for short circuit in case of rainfall and snowfall

- Check grounding of lighting fixture and ballast

Ambient Temperature

- Recommended Service Temperature: ordinary temperature

- Ordinary temperature : -20 ℃ ~ 60 ℃

Condition of Lighting Fixture

- Do not use sealed lighting equipment

- Confirm product contents and use specified products only

- Do not use if short circuit occurs caused by crack near socket connection (welding & coupling) or lampshade

※ Products that are damaged as a result of external causes, conditions demonstrating misuse, improper

installation, not following instructions, improper or inadequate maintenance, accident, or tampering are

excluded under the warranty.


Precautions

Please follow above installation instruction and install accurately -Products that are damaged due to improper installation is excluded under the warranty. Do not use in power supply other than a frequency tolerance and the rated power – It may result in fire and equipment damage. Do not operate at lighting fixture or circuit which has dimming function – It may result in fire and equipment damage. Avoid unstable locations when installing the equipment – It may result in failure from falling Do not operate the equipment outside -20 ~ 50℃ range of ambient temperatures – It may result in fire and failure If the equipment is installed when the ambient temperature is high, pay attention to ventilation of the equipment – It may result in fire and shortening product life cycle Do not repair, remodel, disassemble arbitrarily without following instructions – It may result in safety accident and failure Do not drop, giving a shock, applying force, and scratch. – It may result in failure Do not touch a lamp while it is on, and after lights-out within the next few minutes – It may result in burns and injuries Do not use surrounding a wet or humid environment – It may cause injuries by defective insulation, fall, etc. It may cause noise when lights-on near audio and video devices, such as Radio, TV – When noise occurs, move electric device over 1m (3ft) from the lighting equipment Do not spray chemical on the lamp – It may result in discoloration and deterioration Do not seal the lighting equipment or covered by a painting – It may cause of overheating, and it can lead to fire and injuries Do not use it near combustible/inflammable material, such as gasoline, acid, etc. – It may cause corrosion, shortening product life cycle, and it may leads to fire and explosion Making frequent flickering may result in shortening product life cycle


Certification

Conduction Noise : CE CLASS (B) -3dB

Radiation Noise : CE CLASS (B) -3dB

Vibration Resistant : Power supply normally operated without breakage after Vibration test

1) FREQUENCE :5 => 60 => 5 Hz

2) ACCELERATION : 0.5 G

3) Direction : X, Y, Z

4) Operating Time : 3 minutes

POWER ON/OFF TEST :

Power supply requires On/Off switching test over a 1,000 times on minimum input, normal load, and maximum

output

SURGE TEST

Do not have any breakage, ignition and fuming when it is applied 5 times of ±3KV to between L1-L2

Do not have any breakage, ignition and fuming when it is applied 5 times of ±6KV to between L1(L2)-F.G

ESD TEST

There should be no problem when following electrostatic noise is applied by condenser emission method

Condition : ⓐ Applied Voltage : Air ±15KV, Contact ±8KV

ⓑ Applied number : 10

ⓒ Capacitance: 150pF

ⓓ Discharge Resistance: 330Ω

ⓔ Interval : 1 sec 1 second

Leakage Current

When measuring between Live and 2nd GND, between Neutral and 2nd GND with input impedance meter of

1KΩ with rated Input and no load condition, it requires below 0.5mA

Insulation Resistance

The product requires above 100MΩ of insulation resistance of input and output sides when it applied DC500V.

At this time, measure input and output terminal, each tied separately

High Pot or Withstand Voltage

The product should be no problem when it is applied 3KV AC power (Cutoff Current 10mA) to input and

output sides for 1 minute [3.7KV/1sec.]


Certification

LED LIGHTING POWER CONVERTER - KUMHO ELECTRIC · 2015-09-16 · LED LIGHTING POWER CONVERTER...

Documents

Transcript of LED LIGHTING POWER CONVERTER - KUMHO ELECTRIC · 2015-09-16 · LED LIGHTING POWER CONVERTER...