LED - LAMPS AND LIGHTS - germantechno.co.zagermantechno.co.za/germanOnline/ARTEKO.pdf · LED -...

21
LED GERMAN MANUFACTURER OF LED - LAMPS & LIGHTS LED - LAMPS AND LIGHTS

Transcript of LED - LAMPS AND LIGHTS - germantechno.co.zagermantechno.co.za/germanOnline/ARTEKO.pdf · LED -...

LEDGERMAN MANUFAC TURER OF LED - LAMPS & L IGHTS

LED - LAMPS AND LIGHTS

3LED

LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

Products Page

General Purpose Bulbs 4-5Spotlights 6-7Tracklights 8-9Downlights 10-12Show Case Lamps 13Wall Lamps 14-15Table and Reading 16-17Ceiling Lamps 18-19Floor Lamps 20Pin Base Lamps 21Micro Modules 22Modules 23Strip Lights 24In Line Lamps 25Tubes 26-27Outdoor Lamps 28-29Flood & Spotlights 30-31Special Lamps 32High Bay Lamps 33Street Lamps 34-35LED Benefits 36EU Energy Efficiency Program 37Lighting Terms made easy! 38-39

LED stands for Light Emitting Diode, but for us it stands for: Light Efficiently DefinedLED technology has been developed to replace conventional lighting products. The advantages of using LED technology are numerous, for example, it‘s long life-span, significant energy & cost savings, creates only little to no heat.

LED technology is now available for almost every type of application and fitting, including tubes.

...... Benefit from the Advantages of LED!

Benefits: Energy and Cost savings• Up to 90% energy saving.• LED chip life of about >50,000

operating hours which results in reduced replacement costs.

• Cool operation with reduced air conditioning costs.

• Low maintenance costs and highly recyclable.

Benefits: Security• Improved fire safety – cool

operating.• Voltage fluctuations between

85-265V are allowed.• Safety standard class up to

IP68.

Benefits: Health• No harmful UV light.• No harmful IR light.• No humming, shimmer and

flickering.• No dangerous gases or

mercury content.

Benefits: Environment• 100% recyclable.• No hazardous or special waste.

Advantages of using LED• 100% Luminosity and high

colour rendering of illumi-nated objects.

• In excess of 1 million cycles.• Vibration proof.• Dust and waterproof.• LED attracts 50% less insects.• Five years guarantee

(unless otherwise stated)

LED -Lighting for every Application

Example: Industry (AW Niemeyer, Hamburg, Germany) Example Retail (BoConcept, Hamburg, Germany, Am Fischmarkt)

C O N T A C T U S :Hamburg: +49 40 8990 9150

Bahrain: +973 3636 3428Johannesburg: +27 10 237 0052

We are manufacturer of LED lamps and lights since 1995. Our headquarters

are in Hamburg, Germany and have many years of experience in

designing and manufacturing LED products as a registered manufacturer

under the European “WEEE” legislation for LED products.

With our selected product portfolio, we endeavour to offer products of

distinguished quality, aesthetically pleasing, reliable performance and good

value for money.

Consulting. – We advise on “lighting with LED technology“ and always take customer requirements into account.

Lighting concepts. - LED lighting concepts are developed and visualized for the required applications.

Lighting design. - We ensure that ARTEKO® LED lighting products always fulfil applicable standards and directives (in particular the workplace guidelines) and provide customers with an objective proof of effectiveness.

Light laboratory. - The most modern light laboratory ena-bles ARTEKO® to provide the highest standards and quality - for long-term benefit to our customers.

Profitability. – We determine potential savings and com-pute the profitability of LED investment.

What we can do for you. – Our catalogue shows our range of products - exclusively selected. However, if you cannot find lighting techniques you are looking for, please talk us. Through continuous innovation, this may appear only in sub-sequent catalogues. Find constant updates on our website and visit it regularly: www.arteko-led.com.

Do you want to see the applications of LED personally? Call us, to make an appointment or visit our showrooms:

4 5LED LED

currently not available

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more General-Purpose Bulbs

Bulb CornGeneral-purpose bulb for outdoor or industrial applications.

LED Driver: internal.

Product Details*• SMD-Chip• 6-13 Watt ±10%• 470-1000 Lumen• Colour Rendering Index: RA>65• Light Colour/s: 3250 K,

4250 K• Beam angle: 360º• Base: E27

Bulb U-LineBased on the technology of ARTEKO® LED tube S2. Optimized driver cooling due to the central location in the centre of the light elements. General-purpose bulb for all applications.

LED Driver: internal.

Product Details*• SMD-Chip• 9-20 Watt ±10%• 700-1700 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3150 K, 4150 K,

6250 K• Beam angle: 360º• Base: E27

LED-BulbLED-Filament technology.

Pleasant and warm illumination.Available with clear glass.

Suitable for all luminaires in which the classic light bulb found its place.

Product Details*• Chip: LED-Filament• 4-8 Watt ±10%• 430-780 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K• Beam angle: 360º• Base: E27

LED-Bulb Candle Chip LED-Filament. Pleasant and warm illumination.Available with clear glass.

Suitable for all luminaires in which the classic light bulb found its place.

Product Details*• LED-Filament technology• 2-3 Watt ±10%• 180-280 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K• Beam angle: 360º• Base: E14

“The bulb is back – in good old shape!“

General-Purpose Bulbs

Lamp:Gerd Dieckhoff Design

6 7LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Spotlights

“Spotlights - to highlight objects.“

Spotlight SP 6 g With Mounting Ring and stable mounting springs. Tilts up to 30 °.

Perfect for Hotels, Hospitality and Retail applications.

LED Driver: external.

Product Details*• Sharp MOB-Chip• 10-11 Watt ±10%• 560-615 Lumen• Colour Rendering Index: RA>80,

RA>90, RA>95• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 24º, 38º, 60º• Dimmable with external Driver

Spotlight SP 6 h Finely crafted with a very accurate reflector layer. The visual appearance is similar to that of traditional halogen MR16 spot.

Perfect for Hotels, Hospitality and Retail applications.

LED Driver: external.

Product Details*• Sharp MOB-Chip• 8-11 Watt ±10%• 340-615 Lumen• Colour Rendering Index: RA>80,

RA>90, RA>95• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 24º, 38º, 60º• Dimmable with external Driver

Spotlight SP 6 i Finely crafted with a very accurate reflector layer. The visual appearance is similar to that of traditional halogen MR16 spot. With different mounting rings.

Perfect for Hotels, Hospitality and Retail applications.

LED Driver: external.

Product Details*• Sharp MOB-Chip• 8,5 Watt ±10%• 700-770 Lumen• Colour Rendering Index: RA>80,

RA>90,• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 24º, 38º, 60º• Dimmable with external Driver

Spotlight PAR IP 65 Perfect for exterior application, due to it‘s IP65 rating. Available as PAR 20, PAR 30 and PAR 38.

Perfect for landscape, parks or general Purpose exterior illumination.

LED Driver: internal.

Product Details*• Cree-Chip• 5-18 Watt ±10%• 380-1300 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2850 K, 3250 K,

4250 K, 6250 K• Beam angle: 30º• Base: E27• Some models are dimmable

Spotlight SP 8 retrofitMade to operate with Halogen-Driver-Systems. Simply replace Perfect for Hotels, Hospitality and Retail applications.

LED Driver: external.

Product Details*• Cree-Chip• 5,5 Watt ±10%• 370 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 38º, 60º• Base: GU5,3• Dimmable with external Driver

Spotlight AR 111-RGlare free illumination due to “upside down“-mounted LED-Chip.

Perfect for Hotels, Hospitality and Retail applications.

LED-Driver: internal for 12 Volt, external for 15V / 38V.

Product Details*• Sharp-Chip• 10-14,8 Watt ±10%• 500-800 Lumen / 4200-6000 cd• Colour Rendering Index: RA>80• Light Colour/s: 2700 K• Beam angle: 24º• Base: G53• Dimmable only with external Driver

“Alsterkrug Hotel” in Hamburg, Germany

Spotlights

8 9LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Tracklights

“Tracklights are very flexible. Changing products – sustainable and perfectly highlighted.“

Tracklight TR 15 STAnDARD

For 3-Phase-Rail Systems.Horizontally by 350º and tilts vertically by ±90º.

Made to replace CDM-T-Lamps.

Perfect for Shop and Retail applications.

LED Driver: external (built into the case).

Product Details*• Bridgelux -Chip• 32 Watt ±10%• 3450 Lumen• Colour Rendering Index: RA>80 / RA>90

/ RA>97• Light Colour/s: 2700 K, 3000 K,

4200 K• Beam angle: 16º, 30º, 38º

Tracklight TR MuseumsAvailable in 4 different RAL-Colours.

Very pleasing illumination, hence perfectly suited for Museums. LED Driver: external (built into the case).

Product Details*• Sharp-Chip• 7,5-15,5 Watt ±10%• 870 Lumen• Colour Rendering Index: RA>93• Light Colour/s: 2700 K, 3000 K,

4200 K• Beam angle: 16º-22º infinitely

variable• Dimmable on track spotlight

Tracklight Rail-SystemSuitable for Surface- (MK) or recessed (MR) mounting.

Accessories: Fasteners to design extensive Track Light Rail-Systems.

Tracklight TR 10Available with clear or matt glass.

Perfect for Galleries, Museums, Hotels and Hospitality. LED Driver: external (built into the case).

Product Details*• Epistar-Chip• 15 Watt ±10%• 1250 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4200 K,

6400 K• Beam angle: 100º• Optional dimmable

Tracklight TR 1For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±90º.

Made to replace CDM-T lamps.

Perfect for Shops and Retail applications.

LED Driver: external (built into the case).

Product Details*• Bridgelux- or OSRAM-Chip• 16,5-34 Watt ±10%• 1950 - 4100 Lumen• Colour Rendering Index: RA>80

/ RA>90• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 16º, 17º, 24º, 29º • Optional dimmable

Tracklight TR MultiThe LED-Multitrack-Case can be equipped with all MR16 LED-Spotlights.

Horizontally by 350º and tilts vertically by ±178º.

Fixing of spot with Top-Ring (screw able ).

LED Driver: for GU10-Base Models included.

Also available with GU5, 3-base.

Tracklight TR 14 STAnDARDFor 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±45º. With AC or DC Chip.

Made to replace CDM-T-lamps.

Perfect for Shops and Retail applications.

LED Driver: external (built into the case).

Product Details*• OSRAM Prevaled-Chip• 13-25 Watt ±10%• 760-2050 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000

K, 4000 K• Beam angle: 24º• Dimmable with DC Chip

Tracklight TR 15 FoodSimilar to TR 15, but perfectly tailored for the Food-Sector to illuminate Vegetables, Fruits and Meat Products. Colour spectrum specifically developed for food presentation.Four different Chip-Versions available.

Perfect for Food-Sector & Supermarkets.

LED Driver: external (built into the case).

Product Details*• Tridonic STARK SLE GEN3-19• 30 Watt ±10%• 1700-2490 Lumen• Beam angle: 15º

Tracklight TR 2For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±170º.Available with horizontal or vertical case.

Perfect for Shops and Retail applications.

LED Driver: external (built into the case).

Product Details*• Bridgelux RS- or OSRAM Chip• 34 Watt ±10%• 4100 Lumen• Colour Rendering Index: RA>80

/ RA>90• Light Colour/s: 2700 K, 3000 K,

4200 K• Beam angle: 17º, 29º• Optional dimmable.

“E. von Daniels Concept Store“ – Schützenstraße 21, Hamburg

Tracklight TR 20For 3-Phase-Rail-Systems. Horizontally by 350º and tilts vertically by ±120º.

Perfect for Shops and Retail applications.

LED Driver: internal.

Product Details*• Bridgelux or OSRAM Chip• 32 Watt ±10%• 3750 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 12º, 24º, 36º, 60º• Optional dimmable.

Tracklights

10 11LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

Downlight DL 2 STAnDARD

Fixed Downlight with matt aluminium reflector.

Perfect for Hotels, Hospitality and Retail applications.

LED Driver: AC Model internal, DC Model external.

Product Details*• OSRAM Prevaled Cube AC Chip• 13-40 Watt ±10%• 1050-3160 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 44º• Optional dimmable

... more Downlights

Downlight DL 4 STAnDARDStandardized 6”-Format, fixed, with matt Aluminium reflector.

Perfect for Retail applications, Hotels and Hospitality applica-tions.

LED Driver: AC Model internal, DC Model external.

Product Details*• OSRAM Prevaled Cube AC Chip• 13-26 Watt ±10%• 1050-2080 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 96º• Optional dimmable

Downlight DL 3Horizontal 360º and vertical tilts by 55°. Facet reflector.

Perfect for Retail applications, Hotels and Hospitality applica-tions.

LED Driver: external.

Product Details*• OSRAM or Bridgelux Chip• 31 Watt ±10%• 3450 Lumen• Colour Rendering Index:

RA>80, RA>90• Light Colour/s: 2700 K,

3000 K, 4000 K, 6400 K• Beam angle: 12º, 29º• Optional dimmable

Downlight DL 4 aPStandard downlight, fixed, with matt Aluminium reflector. For surface mounting.

Perfect for Retail applications, Hotels and Hospitality applica-tions.

LED Driver: AC Model internal, DC Model external.

Product Details*• OSRAM Prevaled Cube AC Chip• 13-26 Watt ±10%• 1050-2000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 96º• Optional dimmable

Downlight DL 5 STAnDARDStandardiized 8”-Format, fixed, with matt Aluminium reflector.

Perfect for Retail applications, Hotels and Hospitality applica-tions.

LED Driver: AC Model internal, DC Model external.

Product Details*• OSRAM Prevaled Cube AC Chip• 13-40 Watt ±10%• 1050-3160 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 110º• Optional dimmable

Downlight DL 6 STAnDARDWith Aluminium reflector.

Perfect for Retail applications, Hotels and Hospitality applica-tions.

LED Driver: AC Model internal.

Product Details*• OSRAM Prevaled Cube AC Chip• 13-40 Watt ±10%• 1050-3160 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 110º• Optional dimmable

Downlight DLa 1 /DLa 2Round shape for installation in appropriate ceiling openings. Central Diffuser on the front glass. Available in five different housing Colours and with IP65 rating.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Epistar MCOB-Chip.• 15-25 Watt ±10%• 1215-2025 Lumen• Colour Rendering Index: RA>75• Light Colour/s: 3000 K, 4200

K, 6400 K• Beam angle: 45º, 58º• Optional dimmable

Downlight DLa 3Rectangular in shape, tilted to the long axis. With central diffuser on the front glass. Available in five different housing Colours.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Epistar MCOB-Chip.• 20 Watt ±10%• 1600 Lumen• Colour Rendering Index: RA>72• Light Colour/s: 3000 K, 4200

K, 6400 K• Beam angle: 67º• Optional dimmable

Downlight DLa 4Square in shape, fixed. With central diffuser on the front glass. Available in five different housing Colours.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Epistar MCOB-Chip.• 20 Watt ±10%• 1600 Lumen• Colour Rendering Index: RA>85• Light Colour/s: 3000 K, 4200 K,

6400 K• Beam angle: 48º• Optional dimmable

Downlight DL 1 STAnDARD

Available as rotating, tilting or fixed model. Be equipped with two differ-ent reflectors.

Perfect for Hotels, Hospitality and Retail applications.

LED Driver: AC Model internal, DC Model external.

Product Details*• OSRAM Prevaled-Chip• 13-25 Watt ±10%• 800-2000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000 K, 4000 K• Beam angle: 12º, 29º, 46º• Optional dimmable

“Downlights are characterized by their dynamic light accentuation.“

Downlight DLc 2.1Cardanic suspension of the spot-light, Facet reflector. Available in three different housing Colours.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Bridgelux- or OSRAM-Chip.• 34 Watt ±10%• 4100 Lumen• Colour Rendering Index: RA>80 / RA>90• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 17º, 29º• Optional dimmable

Downlight DLc 1Horizontal and vertical tilts by 45°. Facet reflector. Available in three different housing Colours.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Bridgelux- or OSRAM-Chip.• 34 Watt ±10%• 4100 Lumen• Colour Rendering Index: RA>80 / RA>90• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 17º, 29º• Optional dimmable

“Casa delle scarpe” – „Elbe-Einkaufs-Zentrum“ (Mall), Hamburg

Downlights

Available also as Model DL 1 FoodPerfect food sector for the illumination of vegetables, fruit and meat.

12 13LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

Downlight DLe 1For ambient lighting. Available in three different dimensions and three different operating voltages.

Perfect for Retail applications, Offices, Hospitals and public buildings.

LED Driver: external.

Product Details*• 14-44 Watt ±10%• 1150-4600 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 65º, 70º, 73º• Optional dimmable

Downlight DLe 2For ambient lighting. Available in three different dimensions and three different operating voltages.

Perfect for Retail applications, Offices, Hospitals and public buildings.

LED Driver: external.

Product Details*• 8-45 Watt ±10%• 660-4400 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 100º• Optional dimmable

... more Downlights

“Betten Remstedt“ (Bedding) – Alsterdorfer Straße in Hamburg

... more Show-Case Lamps

“Show-case lamps are fine and elegant -very small light emitters, but with great effect.“

Show Case Lamp VL 2Filigree and slim design. This lamp is itself a work of art.Without being obtrusive, they can be po-sitioned in the room or in the showcase, to light up watches, jewellery, small Art and Exhibition items or pictures. Adjust-able single-LED directional beam head. Available in three different Colours.

Perfect for the Retail applications sector, especially Jewellery.

LED Driver: external.

Product Details*• CREE-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80 / RA>90• Light Colour/s: 2700 K, 3000 K, 4000 K,

6000 K• Beam angle: 20º, 40º, 60º• Optional dimmable

Show Case VL 4One head equipped with three spotlights. Adjustable LED directional beam head. Suitable for indoor use. Available in four different colours.

Perfect to illuminate Watches, Jewel-lery, small Art and Exhibition Items or Pictures.

LED Driver: external.

Product Details*• CREE-Chip• 3x 1 Watt ±10%• 3x 70 Lumen• Colour Rendering Index: RA>80, RA>90• Light Colour/s: 2700 K, 3000 K, 4000

K, 6000 K• Beam angle: 110º• Optional dimmable

Show Case VL 1Filigree and slim design. Adjustable single-LED directional beam head. Available in three different colours.

Perfect to illuminate Watches, Jewel-lery, small Art and Exhibition Items or Pictures.

LED Driver: external.

Product Details*• CREE-Chip• 3 Watt ±10%• 210 Lumen• Colour Rendering Index: RA>80, RA>90• Light Colour/s: 2700 K, 3000 K, 4000

K, 6000 K• Beam angle: 20º, 40º• Optional dimmable

Show Case VL 5One or two heads, with three spotlights. Adjustable LED directional beam head. Suitable for indoor use. Available in three different Colours.

Perfect to illuminate Watches, Jewel-lery, small Art and Exhibition Items or Pictures.

LED Driver: external.

Product Details*• CREE-Chip• 3x 1 / 2x 3x 1 Watt ±10%• 105 / 210 Lumen• Colour Rendering Index: RA>80, RA>90• Light Colour/s: 2700 K, 3000 K, 4000

K, 6000 K• Beam angle: 75º• Optional dimmable

Show Case LampsDownlights

Downlight DLc 5Horizontal rotates, tilts vertically. Available with two different chips. In three differ-ent housing Colours.

Perfect for Retail, Clothing Shops, Hotels and Hospitality applications.

LED Driver: external.

Product Details*• Bridgelux or OSRAM-Chip.• 34 Watt ±10%• 4100 Lumen• Colour Rendering Index:

RA>80, RA>90• Light Colour/s: 2700 K,

3000 K, 4000 K• Beam angle: 17º, 29º• Optional dimmable

Downlight DLc 2.2 / DLc 2.3Alike DLc 2.1 but with two or three spotlights. Each radiator is sepa-rately cardanically suspended.

Perfect for Retail applications, Hotels, Hospitality and Offices.

LED Driver: external.

Product Details*• Bridgelux- or OSRAM-Chip.• 68 / 102 Watt ±10%• 8200 / 12300 Lumen• Colour Rendering Index: RA>80 / RA>90• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 17º, 29º• Optional dimmable

14 15LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Wall Lamps

Wall Lamp WL 2Square in shape. Matt glass. Available in three housing colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 1 Watt ±10%• 100 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP20 Rated

Wall Lamp WL 3Square in shape. Matt glass. Available in three housing colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 1 Watt ±10%• 100 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP44 Rated

Wall Lamp WL 4Square in shape. Matt glass. Available in three housing colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 1-3 Watt ±10%• 100-300 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP20 Rated

Wall Lamp WL 5Elongated, rectangular in shape. Matt glass. Available in three housing colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 1-3 Watt ±10%• 100-300 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP20 Rated

Wall Lamp WL 6Rectangular in shape. Matt glass. Available in three housing Colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with Coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 2-6 Watt ±10%• 180-540 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP20 Rated

Wall Lamp WL 7Square in shape. Matt glass. Available in three housing Colours.

Perfect for stairwells, corridors, hallways and entrance areas.

Alternatively also available with Coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 2-6 Watt ±10%• 180-540 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K and in red, green, blue, amber

• IP20 Rated

Wall Lamp WL 8Horizontally rotates by 350 ° and tilts vertically to 350 °. With clear or matt glass.

Perfect for illuminating objects of art in Museums or for Hotels and restaurants.

LED Driver: external.

Product Details*• Epistar-Chip• 15 Watt ±10%• 1215 Lumen• Colour Rendering Index: RA>80• Light Colour/s:

3000 K, 4200 K, 6400 K• Beam angle: 125º• Dimmable

Wall Lamp SiziliaCeiling / floor spotlight of an exclusive kind. Two centrally located glass lenses, under each one LED chip radiates upward and downward. Lamp housing rotates.

Perfect as a reading lamp next to the bed or in corridors or lobbies.

LED Driver: external.

Product Details*• Citizen-Chip• 2 x 5 Watt ±10%• 2 x 410 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K

Wall Lamp WL 1Square shape. A reflector creates a beautiful, down directed, soft light. With frosted security glass. In three housing colours.

Suitable for stairwells, corridors, hallways and entrance areas.

Optional also available with coloured LED bulbs in red, green, blue and amber.

LED Driver: external.

Product Details*• CREE-Chip• 1 Watt ±10%• 100 Lumen• Colour Rendering Index: RA>80• Light Colour/s:

3000 K, 4000 K, 6000 K and monochromatic Colours: red, green, blue, amber

• IP20 rated

“Wall Lamps provide safety and orientation in walking area.“Wall Lamps in a driveway

Wall Lamps

16 17LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Table & Reading Lamps

Reading Lamp TL 3Timelessly elegant.Flexible lamp arm.On and off switch.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 25º, 45º• Optional dimmable

Reading Lamp TL 4Fine and elegant.Flexible luminary arm.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 25º, 45º• Optional dimmable

Reading Lamp TL 5Space saving. Adjustable, directional head.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 25º, 45º• Optional dimmable• Remote-Control

Reading Lamp TL 6Fine and elegant.Flexible lamp arm.On and off switch.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 25º, 45º• Optional dimmable

Reading Lamp TL 7Fine and elegant. Flexible lamp arm.On and off switch.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 25º, 45º• Optional dimmable

Reading Lamp TL 8Space saving. Adjustable, directional head. On and off switch.

Perfect as a reading lamp next to the bed or indoors.

Integrated LED Driver (not dimmable).

Product Details*• Cree-Chip• 1 Watt ±10%• 70 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 22º, 38º, 60º• Optional dimmable

Table Lamp GardaHousing made of black plastic, horizontally rotates by 270 °. Switchable brightness in three light colours in two stages. Double jointed arm and foot in satin Diecast aluminium.

Product Details*• 6 / 9 /12 Watt ±10%• 660 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 4100 K / 6400 K,

switchable• Beam angle: 160º

“Table lamps are unbeatable in their individual application -Reading lamps for clear light and tireless reading.“

Reading Lamp TL 8

Table Lamp LagoHousing, double jointed arm and foot in satin Diecast aluminium. Lamp housing 180 ° horizontally rotatable.

External Driver included.

Product Details*• 9 Watt ±10%• 400 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 4000 K• Beam angle: 160º

Table Lamp RomaLamp made of satin diecast aluminium. Luminary housing with matt glass.

External Driver included.

Product Details*• 5,4 Watt ±10%• 300 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 4000 K• Beam angle: 160º

Table & Reading Lamps

18 19LED LED

DKL 18

DKL 7 Slim line

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Ceiling Lamps

Ceiling Panel DKL 51 STAnDARDWith 2 Modules (2 light sources).

Perfect for general lighting applications.

LED Driver: external.

Product Details*• OSRAM Prevaled Linear-Chip• 43 Watt ±10%• 5200 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Optional dimmable: 1-10V, Dali

Ceiling Panel DKL 52 STAnDARDWith 2 Modules (2 light sources).

Perfect for general lighting applications.

LED Driver: external.

Product Details*• OSRAM Prevaled Linear-Chip• 40 Watt ±10%• 5000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Optional dimmable: 1-10V, Dali

Pendant Lamp DKL 5 Slender round shape.

Suitable for office, retail applica-tions and services.

LED Driver: internal.

Product Details*• Cree-Chip• 3x 1 / 3x 3 Watt ±10%• 270 / 810 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 15º, 30º

Ceiling Lamp DKL 12Surface mounted luminary in round or square shape.

Perfect for hallways, stairwells, and general indoor applications.

LED Driver: external.

Product Details*• Epistar-Chip• 8-30 Watt ±10%• 640-2430 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4200 K,

6000 K• Beam angle: 120º

Ceiling Panel DKL 7Recessed or surface mounted.Six different sizes available.Optional recessed model available. Excellent uniform light. Also avail-able as standard model for recessed mounting.

Perfect as workplace illumination in offices, retail and production applications.

LED Driver: internal and external.

Product Details*• SMD-Chip• 32-45 Watt ±10%• 5000-6920 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 4250 K,

6500 K• Beam angle: 120º• Optional dimmable

Ceiling PanelDKL 50 STAnDARDThree or four rows of modules (3 or 4 light sources).

Perfect for general lighting applications.

LED Driver: external.

Product Details*• OSRAM Prevaled Linear-Chip• 30-44 Watt ±10%• 3900-5200 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Optional dimmable: 1-10V, Dali

“Ceiling lights – harmonic illuminated lamps – in an elegant and timeless design.“

Pendant Lamp DKL 18Modern and stylish design. 80% of the light rays downward and 20% upward.  Perfect as a desk lamp or above the reception desk.

LED Driver: external.

Product Details*• 55 Watt ±10%• 5880 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 120º

Ceiling Lamp DKL 6 Dome Universal lighting, round in shape.

Perfect for hallways, stairwells and general applications.

LED Driver: external.

Product Details*• SMD-Chip• 11-21 Watt ±10%• 720-1680 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 120º• Optional dimmable

Ceiling Panel DKL 7 Slim lineRecessed or surface mounted.Six different sizes available.Optional recessed model available. Excellent uniform light.

Perfect for office, retail applications and production.

LED Driver: external.

Product Details*• 10-58 Watt ±10%• 900-5100 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 4250 K,

6500 K• Beam angle: 120º• Optional dimmable

Automobile Wichert – Bornkampsweg, Hamburg, Germany

Ceiling Lamps

Thickness 11 mm only.

20 21LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

“Floor lamps – glare-free light for the office and at home.“

Floor Lamp ST 1Stylish LED floor lamp with top and bottom lighting unit and 2-channel driver. Radiation 70% upwards (channel 1) and 30% downwards (channel 2). Each channel is switched separately. Thus, the light can be switched in two stages: 50% and 100%. Adjustable footplate.

Optional presence detector and lighting circuit.

Base: Steel. Shaft and head: aluminium. Lamp cover: macrolon glass.  Perfect for the modern office or living area.

LED Driver:Min. 60.000h, ENEC-Certificate, 2-Channel.

Product Details*• OSRAM-Chip• 106 Watt ±10%• 11.000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K• Beam angle: 2x 135º

(Up- and Downwards)• Optional dimmable

... more Pin-Base Lamps

Pin-Base Lamps STL 1Lamp with optimal heat dissipa-tion. Multi-socket for all G24d- and G24 q-versions (1, 2 and 3). Lamp socket rotates.

Perfect for hallways, stairwells and general applications.

LED Driver: internal or external.

Product Details*• 5-13 Watt ±10%• 420-1200 Lumen• Colour Rendering Index: RA>78• Light Colour/s: 3000 K, 4250 K,

5750 K• Beam angle: 120º• Base: Multisocket

Pin-Base Lamps STL 3Lamp with optimal heat dissipa-tion. Perfect for hallways, stairwells and general applications.

LED Driver: external.

Product Details*• Itswell-Chip• 6-8 Watt ±10%• 430-620 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 4250 K• Beam angle: 140º• Base: 2G7

Pin-Base STL 5Four different lengths making this a very versatile lamps.

Perfect for corridors, stairwells and general applications.

LED Driver: internal or external.

Product Details*• 9-22 Watt ±10%• 540-1320 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 140º• Base: 2G11

“Pin-Base Lamps - convenient lighting for multiple applications.“

Pin-Base Lamps STL 2Lamp with optimal heat dissipa-tion.

Perfect for hallways, stairwells and general applications.

LED Driver: external.

Product Details*• Itswell-Chip• 6-8 Watt ±10%• 430-620 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 4250 K,

5750 K• Beam angle: 140º• Base: G23

Floor Lamps Pin-Base Lamps

22 23LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

KL 1Ceramic housing and copper heat sink.

Perfect for “starry sky“ and fine lighting effects.

LED Driver: external.

Product Details*• Cree-Chip• 1,5 Watt ±10%• ca. 90 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 6500 K• Beam angle: 360º• Base: G4

“Micro-Modules – massive light when space is limited.“

Micro-Modules

Illuminated CeilingsFour different module sizes and is cuttable.

Perfect for ceiling lighting, light boxes and neon signs.

LED Driver: external.

Product Details*• 17-30 Watt ±10%

(depending on module size)• 1296-2304 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

6000 K• Beam angle: 120º• Dimmable with selected driver

“Modules provide large, but uniform illumination.“

LED modules produce uniformly bright and streak-free lighting. The light image is completely quiet - no flagging and fibrillation.

Equip light frames with ARTEKO® LED modules in standardized formats.

Round, rectangular or irregularly shaped design wit-hout limit, as the modules are cuttable.

... more Modules

BillboardsFive different module sizes, which makes each billboards size possible.

Suitable for billboards, light boxes or illuminating ceilings.

LED Driver: external.

Product Details*• 0,6-8,6 Watt ±10%

(depending on Module size)• 30-480 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 4000 K• Beam angle: 120º• dimmable with selected Driver

Frame ModuleSingle or double sided il-luminated displays for indoor lighting. Modules in three lengths available.

Perfect for billboards.

LED Driver: external.

Product Details*• 7,5-37,5 Watt ±10% • 300-1500 Lumen• Colour Rendering Index: RA>75• Light Colour/s: 4000 K• Beam angle: 16º• dimmable with selected Driver

LME-ModuleInnovative Modules for individual lighting design.

Perfect for office and shop.

LED Driver: external.

Product Details*• 4,5-10 Watt ±10%• 540-1050 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 2700 K, 3500 K,

4500 K• Beam angle: 160º

Modules

Billboards UCI – Bochum, Germany (Cinema)

Billboards Smiley’s – Hamburg, Germany

24 25LED LED

1500

600

1200

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

SRP 1 RGBRGB Strip Light for accessories: Amplifier AMP 1 and Controller CTR 1.

Suitable for indoor light arrange-ments.

LED Driver: external.

Product Details*• 7,2-14,4 Watt ±10% (each Metre)• 12 Volt DC• 30 or 60 LED each Metre• Colour Rendering Index: RGB• Dimmable with Controller

“Striplights – for versatile applications.“

... more Striplights

SRP 3Flexible Strip Light, cuttable every 3 LEDs. Normal lighting.

Perfect for shelf or cove lighting.

LED Driver: external.

Product Details*• 14,4 Watt ±10% each Metre• 12 Volt DC• 60 LED / Metre• Light Colour/s: 2700 K, 3000 K,

4000 K• Beam angle: 120º

SRP 10Flexible Strip Light, cuttable every 3 LEDs Normal light and monochromatic Colours.

Perfect for shelf or cove lighting.

LED Driver: external.

Product Details*• 4,8-9,6 Watt ±10% each Metre• 12 Volt DC• 60 or 120 LED / Metre• Light Colour/s: 3000 K, 5000

K, 8000 K and red, green, blue, amber, yellow

• Beam angle: 120º

SRP 12230 Volt (High-Volt), can also be used for outdoor applications up to 150 metres in length with one Driver.

Perfect for accompaniment light-ing, corridors, stairwells.

LED Driver: external.

Product Details*• 3,5-7 Watt ±10%• 230 Volt AC• Light Colour/s: 3000 K, 6500 K

and red, green, blue, amber• Beam angle: 120º• Dimmable with Leading-Edge

dimmer

Aluminium ProfileMount strip lights secure. Material anodized Aluminium. For surface, ceiling, or corner mounting.

Plastic cover, round or flat, in clear, frosted or milky available.

End caps.

ARTEKO ® LED strip lights are something very extraordi-nary. LED Chips, embedded in a narrow slim silicone tubing for laying over long distances.

Combination of different sizes with each other.

Controlling of the RGB model via an amplifier and con-trol module with preset sequential programs such as the impressions of a colourful waterfall or blinking mo-tion illusions.

If you prefer a more discreet and quiet scenario, choose the soft light transitions with many beautiful colours.

Striplights

In Line Lamp LL 5Can be used singly or in a row light band. Available in three different lengths.

Fast assembly without to open the lamp!

Perfect for shop, warehouse and general applications.

LED Driver: external.

Product Details*• 25-49 Watt ±10%

(depending on Size)• 2400-5600 Lumen• Colour Rendering Index: RA>70, RA>80• Light Colour/s: 3250 K, 4750 K,

6250 K• Beam angle: 120º• Dimmable with selected dimmer

“In Line Lamps – practical and flexible to illuminate long distances.Plug-n-go!“

... more In Line Lamps

Light BandFast assembly without opening the lamp to open!In four base sizes. Additional Features: Blind lighting bands in three lengths and a Track Light Rail for integration of Track Lights in the light band.

Perfect for shop, warehouse and general applications.

LED Driver: external.

Product Details*• 11,5-57,6 Watt ±10%• 1220-6220 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 4750 K,

6250 K• Beam angle: 120º

In Line Lamps

26 27LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Tubes

Series 2Retrofit. Adjustable base. Also suitable for emergency power systems. Also available with 80º beam angle.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: retrofit. (Magnetic/Electronic Ballast only)

Product Details*• Epistar-Chip• 8-22 Watt ±10%• 720-2100 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2600 K, 3150 K,

4150 K, 4750 K, 6250 K• Base: G13

Series 5 – T5• T 5 Tubes with clear or frosted

Cover• Round design

Perfect for general applications.

LED Driver: external.

Product Details*• SMD 2835 Chip• 10-30 Watt ±10%• 950-2950 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 4150 K, 6250 K• Base: G5

Series 6Retrofit. Adjustable base.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: retrofit. (Magnetic/Electronic Ballast only)

Product Details*• Epistar-Chip• 8-30 Watt ±10%• 900-3180 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2600 K, 3150 K,

4150 K, 4750 K, 6250 K• Base: G13

Model Series 6 Sensor: with motion and energy saving mode: after 60 seconds of no motion detection, tubes turn down to a power of 15% only.

Series 3With external drivers up to 100,000 hours of life-span. Adjustable base.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: external.

Product Details*• Epistar-Chip• 8-28 Watt ±10%• 900-3180 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2600 K, 3150 K,

4150 K, 4750 K, 6250 K• Base: G13

Series 6 sensorWith motion and energy saving mode: after 60 seconds of no motion detection, tubes turn down to a power of 15% only. Adjustable base.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: retrofit. (Magnetic/Electronic Ballast only)

Product Details*• Epistar-Chip• 8-25 Watt ±10%• 720-2200 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2600 K, 3150 K,

4150 K, 4750 K, 6250 K• Base: G13

The proportion of artificial light from fluorescent tubes in factories, parking garages and many households is around 75%. Because they are extremely well suited for applications that require a long and uniform illumination.

However, they have many disadvantages. Conventional fluorescent lamps contain environmentally harmful substances such as mercury and different noble gases. Through these harmful content, the fluo-rescent tubes have to be disposed of as hazardous waste. In addi-tion, fluorescent light require a certain amount of time until it devel-

ops its full brightness and quickly turn hot. Other weaknesses are buzzing, fatigue and flickering. ARTEKO® LED tubes do not contain any toxic materials and require no ballast. They have a standard G13 socket. The life-span of our LED tubes is significantly longer, were they reach at least 50,000h.

Series 7Due to it‘s external Driver up to 100.000h lifespan. Adjustable Base.

Perfect for Industry, Warehouse, Workshop, Production and general lighting.

LED Driver: external.

Product Details*• Epistar-Chip• 8-33 Watt ±10%• 900-3750 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2600 K, 3150 K, 4150 K, 4750 K, 6250 K• Base: G13

Series 8Oval design. Retrofit. Adjustable base.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: retrofit. (Magnetic/Electronic Ballast only)

Product Details*• Epistar-Chip• 10-30 Watt ±10%• 1000-3100 Lumen• Colour Rendering Index: RA>80,

RA>90• Light Colour/s: 2600 K, 3150 K,

4150 K, 6250 K• Base: G13

Series 10LED-Tubes with S14s- or S14d-base.

LED Driver: internal.

Product Details*• SMD-Chip.• 6 Watt ±10%• 380 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2700 K, 4500 K• Beam angle: 140º• Base: S14s or S14d

Tube Fixture Sport“Ball resistant grid“ for T8 LED tubes. Grid reinforced with steel wires and secured with screws, to prevent falling out.

For 2 or 3 tubes.

• Base: G13• for tube lenght of 1500 mm

Light Band SystemFast-assembly lighting system for 1 or 2 tubes.

Accessories: • Suspension • Rail 5-pin/7-pin • Rail connector • Reflectors • Grid • Cover • Fluorescent tube support • Fluorescent tube fixture IP65• Stainless Steel tube fixture

“LED Tubes – perfect for any industrial and logistic applications.“

Series 9Oval design. External Driver.Adjustable base.

Perfect for industrial, warehouse, workshop, manufacturing and general applications.

LED Driver: external.

Product Details*• Epistar-Chip• 9,5-28 Watt ±10%• 950-2950 Lumen• Colour Rendering Index: RA>80,

RA>90• Light Colour/s: 2600 K, 3150 K,

4150 K• Base: G13

Warehouse „A.W. Niemeyer“ – Hamburg, Germany

Retrofit – Safety is our top priority. The replacement of light bulbs is usu-ally not a problem. For fluorescent lamps that is not always that easy and should be performed by a specialist/electrician.

Some of our LED tube models, are of a “retro-fit“ design, this means fluorescent tubes can be simply replaced as a LED starter is included. But always consider the type of the existing ballast.

Tube Fixture Standard60-150 cm

Tube Fixture IP65

60-150 cmfor 1 and 2 tubes

Tube FixtureETREdelstahl 60-150 cmfor 1 and 2 tubes

Tubes

28 29LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Outdoor Lamps

Wall washerMatrix Flood RGBFor impressive facade lighting.RGB with digital control by standard DMX 512 protocol. IP67 rated.

Perfect for buildings, objects, and all applications with Colour-shaping effect.

LED Driver: Further Accessories for full function required.

Product Details*• 108 Watt ±10%• Light Colour/s: RGB• Beam angle: 15º, 25º, 30º, 45º,

60º

Wall washerSpot RGBFor impressive facade lighting.RGB with digital control by standard DMX 512 protocol. IP66 rated.

Perfect for buildings, objects, and all applications with Colour shaping effect.

LED Driver: Further Accessories for full function required.

Product Details*• 9 Watt ±10%• Light Colour/s: RGB• Beam angle: 15º, 25º, 30º, 45º,

60º

Wall washerFor impressive facade lighting.RGB with digital control by standard DMX 512 protocol. IP65 rated. Also available in monochromatic lighting Colours.

Perfect for buildings, objects, and all applications with Colour shaping effect.

LED Driver: Further Accessories for full function required.

Product Details*• 36-108 Watt ±10%• Light Colour/s: RGB, red, green,

blue, white, amber• Beam angle: 15º, 25º, 30º, 45º,

60º

Spike soloE27 socket and rubber gasket for moisture protection. Vertical adjustable housing. As LED outdoor lamp particularly suitable for IP65 rated PAR 30 and PAR 38 bulbs.

Perfect for corniche, promenades, gardens and outdoor objects.

Accessories• Controller CTR 2 for RGB

Outdoor Lamps• Amplifier AMP 2 for RGB

Outdoor Lamps

Recessed Lamp HofWith extremely powerful high power LED chip and a very corrosion resistant, round or square, stainless steel ring.

Perfect for corniche, promenades, gardens and outdoor objects.

LED Driver: internal.

Product Details*• 3-10 Watt ±10%• 290-990 Lumen• Colour Rendering Index: RA>60

/ RA>70• Light Colour/s: 3000 K, 6500 K

Walkway LampAmrum and FoehrBeautiful and slim design. For 230 volt power connection with E27 Base.

Perfect for corniche, promenades, gardens and outdoor objects.

“Outdoor lighting – architecture accentuate with lighting.“

Recessed MinispotHigh quality 304 stainless steel housing. IP65 rated.

Perfect for stairwells, elevators and decorative accent lighting.

LED Driver: external.

Product Details*• OSRAM OSLON-Chip• 3 Watt ±10%• 260 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 4100 K• Beam angle (Lense): 30º, 45º, 60º, 90º• Beam angle with vandal-safe

security Glass: 120º

Wall washerPAR RGBFor impressive facade lighting.RGB with digital control by standard DMX 512 protocol. Lamp: IP68 rated. Controller: IP65 rated.

Perfect for buildings, objects, and all applications with Colour shaping effect.

LED Driver: Further Accessories for full function required.

Product Details*• 40-78 Watt ±10%• Light Colour/s: RGB• Beam angle: 15º, 25º, 30º, 45º,

60º

Billboards FloodlightFor an excellent and uniform illumination of large billboards or billboards. The 75 watt version replaces conventional 450 watt halogen spotlights. For billboards up to 6 meters in height.

Perfect for posters, shop signs, facades and billboards.

LED Driver: internal.

Product Details*• Cree-XP-E-Chip• 50-80 Watt ±10%• 4500-7500 Lumen• Colour Rendering Index: RA>75• Light Colour/s: 3250 K, 4750 K,

6250 K

Outdoor Lamps

Outdoor Lamp KielWith an extremely high-power LED chip. Available in three Colours.

Suitable for parks, natural areas open to the public and general walkways.

LED Driver: external.

Product Details*• 33 Watt ±10%• 3000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 5350 K• Beam angle: 160º

30 31LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Floodlights

Floodlight FS 5Available as Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.

Perfect to illuminate larger sized areas.

LED Driver: internal.

Product Details*• 45-81 Watt ±10%• 4400-7700 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2700 K, 3000 K,

4000 K, 5000 K, 6500 K, red, green, yellow, blue

• Beam angle: 22º

FloodlightFL 7 / FS 7 GeniusFL 8 / FS 8 Genius CompactAvailable as Floodlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip.

Perfect to illuminate larger sized areas, Industrial applications, Street lighting and many more.

LED Driver: internal.

Product Details*• OSRAM OSLON Square-Chip• 30-400 Watt ±10%• 3600-48000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 6500 K• Beam angle: 20º, 60º, 120º

Projection lightFP 7 Genius ProjectionFP 8 Genius CompactAvailable as Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip.

Perfect to illuminate larger sized areas, Industrial applications, Street lighting and many more.

LED Driver: internal.

Product Details*• OSRAM OSLON Square-Chip• 30-400 Watt ±10%• 3600-48000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 6500 K• Beam angle: 60º, 120º

Floodlight FL 9 PIRFloodlight for outdoor applications with PIR motion detector. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip.

Perfect to illuminate smaller sized areas.

LED Driver: internal.

Product Details*• 27-58 Watt ±10%• 2200-5500 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 4750 K• Beam angle: 75º

Floodlight FL 12 MegaReplaces conventional 2000 watt metal halide lamps.Waterproof with a low condensate tendency. With OSRAM OSLON Square chip.

Perfect for factories, shipyards, outdoors, industrial and harbours, sports courts.

LED Driver: internal.

Product Details*• 500-1000 Watt ±10%• 77500-155000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 4000 K, 5700 K• Beam angle: 87º/21º

Floodlight FL 1For Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and as RGB floodlight.

Perfect to illuminate smaller sized areas.

LED Driver: internal.

Product Details*• 11-21 Watt ±10%• 1200-2400 Lumen• Colour Rendering Index: RA>75,

RA>80• Light Colour/s: 3250 K, 4750 K,

6500 K, red, green, yellow, blue• Beam angle: 110º• optional dimmable

Floodlight FL 3 / FS 3Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.

Perfect to illuminate medium sized areas.

LED Driver: internal.

Product Details*• 46-57 Watt ±10%• 4400-5500 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2700 K, 3000 K,

4000 K, 5000 K, 6500 K, red, green, yellow, blue

• Beam angle: 50º, 100º

Floodlight FL 11The FL 11 can be adjusted to require-ments from 24 to 70 watts. The elegant design, allows the use even in exposed position/location.

LED Driver: internal.

Product Details*• Bridgelux VERO29-Chip• 27-76,8 Watt ±10%• 3800-9450 Lumen• Colour Rendering Index: RA>70,

RA>80, RA>90• Light Colour/s: 2700 K, 3000 K,

4000 K, 5000 K• Beam angle: 100º• Optional dimmable

“Floodlights – increase security with LED Lighting.“

Floodlight FL 2 / FS 2Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.

Perfect to illuminate smaller sized areas.

LED Driver: internal.Also available with rechargeable battery.

Product Details*• 23-35 Watt ±10%• 2200-3300 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2700 K, 3000 K,

4000 K, 5000 K, 6500 K, red, green, yellow, blue

• Beam angle: 50º, 100º

Floodlight FL 6 / FS 6Available as Flood or Spotlight for Indoor and Outdoor applications. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.

Perfect to illuminate larger sized areas.

LED Driver: internal.

Product Details*• 91-151 Watt ±10%• 8800-15400 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 2700 K, 3000 K,

4000 K, 5000 K, 6500 K, red, green, yellow, blue

• Beam angle: 22º, 75º

Floodlight FL 4Floodlight for Indoor and Outdoor applications. Asymmetric Reflector. Diecast aluminium housing, reflector made of high purity aluminium, safety glass, durable ballast, LED high-power chip. Also available in monochromatic lighting Colours and for 230 Volt AC, 12 Volt DC or 24 Volt DC.

Perfect to illuminate medium sized areas.

LED Driver: internal.

Product Details*• 56-92 Watt ±10%• 4300-7200 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3250 K, 4750 K,

6500 K, red, green, yellow, blue• Beam angle: 75º

Floodlights

32 33LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Special Lamps

FLexP 2Safety floodlight for use in potentially dangerous environments. With antistatic, anticorrosive paint type WF2. Diecast aluminium housing. Hardened glass lens.

Rated: Ex d IIB T6 (Explosion protection). ATEX certified

Perfect for heavy industry, shipyards, offshore installations, tunnels and more.

LED Driver: internal.

Product Details*• 60-120 Watt ±10%• 5700-11500 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 5000-6500 K,• Beam angle: 60º, 120º and

140º horizontal / 70º vertical

Grow LampGrow Lamp for efficient plant growth.With OSRAM Chip.

Perfect for greenhouses, plant breeding and flowers.

LED Driver: internal.

Product Details*• 100-500 Watt ±10%

FLexP 1Safety floodlight for use in poten-tially dangerous environments. With antistatic, anticorrosive paint type WF2. Diecast aluminium housing. Hardened glass lens.

Rated: Ex d IIB T6 (Explosion protec-tion). ATEX certified

Perfect for heavy industry, ship-yards, offshore installations, tunnels and more.

LED Driver: internal.

Product Details*• Bridgelux-Chip• 20-50 Watt ±10%• 1800-4600 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 5000-6500 K• Beam angle: 60º, 120º and

140º horizontal / 70º vertical

“Special light – for special applications.“

Special Lamps

... more High-Bay Lamps

High-Bay HL 2High-Efficient OSRAM OSLON Square-chip. The cabinet surface is sealed with silicone and therefore very resistant to environmental influ-ences.

Diecast aluminium housing.

Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas.

LED Driver: internal.

Product Details*• 60-180 Watt ±10%• 6750-21870 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3500 K, 6000 K• Beam angle: 30º, 60º

High-Bay HL 3High performance OSRAM OSLON Square-chip. For high ambient temperatures up to + 90 ° C. Housing waterproof and with a low condensate tendency. 13 different position settings, due to flexible headband.

Diecast aluminium housing.

Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas.

LED Driver: internal.

Product Details*• 90-500 Watt ±10%• 10200-52000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 4000 K,5700 K• Beam angle: 25º, 45º, 60º, 90º

High-Bay HL 4Housing white powder coated. Reflector mounted separately.

Diecast aluminium housing.

Perfect for factories, warehouses, exhibition.

LED Driver: internal.

Product Details*• 60-120 Watt ±10%• 5700-11400 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 4000 K,

5700 K• Beam angle: 90º

High-Bay HL 1High-Efficient LED chip. The cabinet surface is sealed with silicone and therefore very resistant to environmental influences. Diecast aluminium housing with glass cover. Different Reflectors made of high purity aluminium or poly carbonate.

Perfect for factories, warehouses, schools, gymnasiums, yards and outdoor areas.

LED Driver: internal.

Product Details*• 66-109 Watt ±10%• 7200-12000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 6500 K• Beam angle: 30º, 60º

“High-Bay Lamps – light for spacious illumination.“

Aluminium Reflector 30º

Aluminium Reflector 60º

Prismatic Reflector

High-Bay Lamps

34 35LED LED

* The product details represents the minimum and maximum performance of all product models. Model specific details please see the data sheets, available at: www.arteko-led.com/online-katalog/

... more Street Lamps

Street Lamp AirportExtremely powerful high-power LED chip. High brightness and clear Colours. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.

AC 230 V AC, 12 volts DC or 24 volts DC.

For posts: 12-30 Metre.

LED Driver: internal.

Product Details*• 158-218 Watt ±10%• 17500-25000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 4000 K,

6500 K• Beam angle:

Single 140 W: 4 x 65º, Total 80º x 130º

Street Lamp BonnCan be mounted on top or side of post. Very lightweight model.Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.

AC 230 V AC, 12 volts DC or 24 volts DC.

For posts: 3-7 Metre.

LED Driver: internal.

Product Details*• 22-45 Watt ±10%• 2100-4200 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 4000 K,

6500 K• Beam angle: 120º

Street Lamp Bonn IICan be mounted on top or side of post. Very lightweight model.Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.

AC 230 V AC, 12 volts DC or 24 volts DC.

For posts: 7-15 Metre.

LED Driver: internal.

Product Details*• 55-90 Watt ±10%• 5250-8400 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 4000 K,

6500 K• Beam angle: 120º

Street Lamp GeniusOSRAM OSLON Square-chip. The “All-in-one“ light. Can be used as street light, flood or spotlight.

AC 230 V AC, 12 volts DC or 24 volts DC.

Perfect for heavy industry and foundries.

For posts: 12-50 Metre.

LED Driver: internal.

Product Details*• OSRAM OSLON Square-Chip• 400 Watt ±10%• 48000 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 6000 K• Beam angle: 140º x 60º

Street LampGenius compactOSRAM OSLON Square-chip. The “All-in-one“ light. Be used as street light, flood or spotlight.

AC 230 V AC, 12 volts DC or 24 volts DC.

Perfect for heavy industry and foundries.

For posts: 12-35 Metre.

LED Driver: internal.

Product Details*• 30-270 Watt ±10%• 3600-32400 Lumen• Colour Rendering Index: RA>80• Light Colour/s: 3000 K, 6000 K• Beam angle: 140º x 60º

Street Lamp Cologne IIExtremely powerful high-power LED chip. High brightness and clear Colours. Perfect heat dissipation. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.

AC 230 V AC, 12 volts DC or 24 volts DC.

For posts: 7-20 Metre.

LED Driver: internal.

Product Details*• 58-138 Watt ±10%• 5250-12600 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 4000 K,

5700 K• Beam angle: 148º

Accessorie SpigotFully galvanized iron.

Rain endcap included.

Accessorie Reducing PipeFully galvanized iron.

Street Lamp CologneExtremely powerful high-power LED chip. High brightness and clear Colours. Diecast aluminium housing with high intensity, safety glass cover, reflector made of high purity aluminium.

AC 230 V AC, 12V DC or 24V DC.

For posts: 3-7 metres.

LED Driver: internal.

Product Details*• 22-44 Watt ±10%• 2500-5000 Lumen• Colour Rendering Index: RA>70• Light Colour/s: 3000 K, 5000 K,

6500 K• Beam angle: 120º x 80º

“LED Street Lamps – increased safety in public areas.“

Sewage Plant in Geesthacht, Germany

Terminal „H.&J. Brüggen“ in Lübeck, Germany

Street Lamps

36 37LED LED

Energy Saving Bulbs (CFL)Efficient and versatile. Many different light colours and shapes available. Life-span depends on the quality and range between 6,000 and 10,000 hours. Attention: CFL contain hazardous sub-stances such as Mercury.

Incandescent Bulb

FluorescentTubes

Halogen* Energy SaverCFL*

LED*

20%

up tp

60%

up to

90%

*

up to

80%

*

* Bulbs have the ability to create at least as much brightness compared to incandescent bulbs.

The “Efficiency Stars“ of bulbs

LED Bulbs (Light Emitting Diodes)Efficient, durable, sturdy. Suitable as a replacement for incandescent and any other lighting application. Life-span depends on quality and range between 15,000 and 100,000 hours.

Efficient Halogen BulbsThe efficient light bulb. Particularly warm light and good colour rendering. Life-span depends on the quality and range between 2,000 and 4,000 hours.

LED Benefits - Save up to 90 percent electricity

Efficient bulbs consume much less electricity than conventional ones. With the right light, up to 90 percent of electricity and cost could be saved.

Ener

gy C

onsu

mp

tion

in %

Incandescent Bulb

Halogen Energy SaverCFL

LED

Energy Efficiency Program of the EU

Lumen is a unit of measure for light energy. In other words, the total light output from an electric source is expressed in lumens. The higher the Lumen rating, the brighter the light to the human eye.

Watts are used to measure power con-sumption. Often individuals confuse a „wattage“ rating with a “lumen“ rating. Lumens describe the brightness of the lamp, wattage describes the power it takes (on your utility bill) to operate that lamp.

In general, however, a higher wattage lamp will normally produce more light (more lumens) than a lower wattage lamp OF THE SAME TYPE.

Good to know - Lumen vs. Watt

Light bulb packages will standardize with new labels which will make it much easier to buy the most efficient light bulb, regardless if LED, CFL, fluorescent or halogen.

The main indicator on the light bulb package will be “Lumen” that will replace the current “Watts.” Lumen represents the amount of light emitted by a light source and is a more accurate measure of the brightness of a bulb.

So no matter what kind of bulb, simply comparing lumens will enable you to com-pare the brightness level each bulb will deliver. After you determine the lumen level you prefer, you can then look to other indicators such as the energy efficien-cy, lifetime run cost, and dim-ability to select the ideal bulb for your application.

Brig

htne

ss in

lum

en (l

m)

38 39LED LED

Lighting Terms made easy!

Have you ever wondered what candelas, lumens and lux REALLY are? Well, you can research it. You can Google it. And read article after article, getting more and more confused in the process. The following explanation aims to summa-rise and simplify the magic of Lighting Terms for those light measuring tools.

Did you know: The light intensity of the sun equals about 20,000,000,000,000,000,000,000 candelas!

What is Candela, Lumen and Lux? ... a very simple explanation!

One lumen = the amount of light produced by a 1 candela source

radiating out through 1 steradian (one steradian is about 1/12.57 of a sphere) - in this case 1 m² of this

sphere.

One candela = the light inten-sity from a candle (more or less).

One lux = the illumination pro-duced when there is one lumen

falling on one square metre.

Example: Let`s say a light source produces 100 lumens and illuminates the spot on the wall at 100 lux.

100 lumens and wide beam -> 100 lux

If we narrow the beam so that the il-luminated spot on the wall is reduced by 1/10, the number of lumens is still the same, 100 lumens, but now all these 100 lumens are ten times as “concentrated”, making the spot on the wall ten times brighter; 1000 lux.

Another Example: =Let`s assume this light source illuminates a 1m² spot on the wall - 1 metre away - at 10 Lux.

1 m²10 lux

4 m²2.5 lux

Then we move the light source 1 Metre further away from the wall. Now the spot on the wall is four times as big (inverse-square-law), making it 4m². So instead of concentrating the lumens, as we did before, we are SPREADING THEM OUT, giving a lux value of 10/4 = 2.5 lux!

100 lumens and narrow beam -> 1000 lux

1 Metre

2 Metre

Lighting Terms made easy!

Beam Angle

Rang ing between 0 and 360 degrees, it is the direction light is emit ted by a par tic u-lar bulb. The com mon incan des cent bulb has a beam angle close to 350 degrees because it sends light in all directions ex-cept where it plugs into the light socket.

LED´s, on the other hand, can be focused or dispersed. As the beam angle increases, the intensity of the light decreases be-cause the light is dispersing over a wider range.

On the other hand, as the beam angle decreases, the light be-comes more focused, which results in a more tightly-focused, intense beam of light.

Note: LED bulbs have the property that the luminance (lumens) is depending on the colour-temper-ature (degrees Kelvin) of the generated light. Warm-white lights with the same power are a little less bright than the day-light version.

CRI or RA (Colour Rendering Ability)

Colour rendering is the ability of a light source to produce COLOUR in objects. The colour rendering index is ranging between 0-100 and 100 is best in produc-ing vibrant colour in objects. So in essence, light with a colour rendering ability of 80 will produce more vibrant colour in the same object than a light source with a colour rendering ability of 60, etc.

Light produced from LED lamps by a diode (Light Emitting Diode). Here we explain the main terms which are as-sociated with LED lamps & lights:

Colour Temperature

Kelvin, described as a temperature or K, expresses the overall colour of a light source itself. When you describe a light as

being either ‚cool‘ or ‚warm‘ it‘s the col-our temperature that you‘re discussing. Lamps range in colour from about 2100K to 10000K. Lower colour temperatures (ex 3000K) represent ‚warmer‘ light, high-er (ex 4100K +) represent ‚cooler‘ light.

Warm-white will be used for a cosy atmos-phere in living rooms, natural-white and day-light where it comes to bright illumi-

nation and the best visibility of the illumnated area - for ex-ample in the workplace.

Warm-White Natural-White Cool/Daylight-White

Color temperature

Beam angle

Headquarter:

ARTEKO® LEDHolstenkamp 4022525 HamburgFederal Republic of Germany

T: +49 40 89909-150F: +49 40 89909-199E: [email protected]: www.arteko-led.com

Branch Office Middle-East:

ARTEKO® Engineering Middle-EastP.O. Box 21207ManamaKingdom of Bahrain

T: +973 36 36 34 28F: +49 40 89909-199 E: [email protected]: www.arteko-led.com

Sole Agent Southern Africa:

German Techno Importers (Pty) Ltd.P.O. Box 66385Broadway 2020South Africa

T: +27 10 237 0052F: +27 86 503 0379E: [email protected]: www.arteko-led.com

© 2014 ARTEKO, Hamburg, Germany.

All rights reserved.

ARTEKO is a registered manufacturer in Europe under the “WEEE” legislation (Stiftung EAR) with the registration No. DE84915749.

Jurisdiction and Performance Hamburg, Germany. We trade on the basis of our General Terms and Conditions only!

Through constant product innovations, the specifications of the products are subject to change.

For errors of any kind, we take no responsibility. Colour variations are due to printing.

Please refer to our website for product and data-sheets at: www.arteko-led.com