LED Jersey barrier lights - US Reflector files/LED-Lights/MK-6 Markers.pdf · Leisure Areas Ships...
Transcript of LED Jersey barrier lights - US Reflector files/LED-Lights/MK-6 Markers.pdf · Leisure Areas Ships...
L.E.D.TM
SU Marker Posts - Safety Equipment - Delineators
™ SOLAR MK-6
DESCRIPTION MK-6 markers are a self concealed L.E.D. marker for all types of roadways such as rotaries, dangerous curbs, toll booths, borders, approaching pedestrian passageways, highway ex-its and intersections.
MK-6 Markers stand apart from classic road markings by uti-lizing solar energy as its power source and having the sim-plicity to choose how bright the marker should be and how it flashes, even if a sustained burn is required.
BENEFITS Low tension 0.4 watt, 1 watt and 3 watt LED markers are visible from 360° which is ideally suited for round about markings providing absolute day & night time visibility.
Other applications: Airports Bus Stops Railways Parks Dockyards Pedestrian & Leisure Areas Ships Industrial pathways Landscaping Driveways Loading docs
Illuminate roundabouts & dangerous curbs with absolute visibility
Curb Lighting Wall lighting Day & Night visibility
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
TECHNICAL Function power: 12 or 24 watt Low tension cable with a “Clip and Go” connecting sys-tem in which no specific tooling is required.
MK-6 markers function either in auto synchronized flash mode or continuous mode working proficiently in sunny areas as well as in darker areas.
A safe solution to urban lighting installations in case of breakdown.
Available light sensor technology for automatic functioning.
Long term applications MK-6 technology is protected inside a toughened glass shell offering outstanding L.E.D. long term light transmission and exceptional wear resistance designed to adapt and respond to the future demands of illuminating road marking technology.
Power MK-6 markers can be independently powered using a central solar energy power system using panels and ac-cumulators. Alternatively a direct hard wire to on site power source may be used
MK-6 markers are an excel-lent solution to green long term road illumination technology
Resists 16 tons
Life span 100,000 hours
12 or 24 volts BENEFITSSelf illuminating
EstheticAudible noise warning
All applications
•
•
•
•
••
•
CHARACTERISTICS
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
MK-6 Installation on concrete barriers
Technical™
SOLAR MK-6
INSTALLATIONRecommended installation :
1 Coring the concrete barrier ¾” deep x 4¾” wide (20mm x 120 mm of diameter)
2 Drilling 1 “ diameter at the core center and piercing the concrete barrier. (25mm)
3 Connect the stud to the supply cable which is set behind the concrete barrier.
4 The central power can be provided by a solar panel or by connecting to a local power source
rete barriers
Technical data• MK6 Toughened glass shell
• LED Quantity 1 LED
• LED Color Most all colors available
• Lifespan 100 000 hours
• Light power available
0.4 watt
1 watt
3 watts
• Mechanical resistance > 16 tons
• Power Function: 12 or 24 Volts
• Power
It is necessary to have a central power supply: Solar or local power source
Each stud must be connected to the sup-ply cable.
• Installation Embedding into surface by core drilling
• Diameter of drilling ¾” x 4¾” in depth (120mm x 25mm)
• Recommended glue Epoxy resin
• Recommended distances between each stud
Superior to 6 Yards on exit highway
Superior to 6 yards on roundabouts
Superior to 13 yards on dangerous turns
• Studs connection Quick clip connection system (without any specific tooling)
TM
SU Marker Posts - Safety Equipment - Delineators