LED Bionic Recessed Linear & Wall Wash · 2016-09-07 · PROG (optional)rogrammable light output....
Transcript of LED Bionic Recessed Linear & Wall Wash · 2016-09-07 · PROG (optional)rogrammable light output....
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Bionic™ | Recessed Linear & Wall WashLED
1Recessed Linear02-02-2015
BIO-FLSH-LED4LO-ABW1784 Delivered Lumens19 Watts94 lm/w1.4 Spacing Criteria84 CRI28 R9
2´3´4´6´8´R___ (Row length)
Note: Individual fixtures are not intended for row mounting
Open office illumination, wall washing or grazing,
Housing: Extruded aluminum accommodates a wide range of ceiling systems and complex installations. Armstrong™ TechZone compatible. 4 Optics: Batwing (D1X), Soft Glow (D1), Wall Wash (D1) or precise Wall Graze (D1G). Series: See also our Bionic Perimeter for visual continuity. Our P43 System is nearly identical with the same great optics and a budget-friendly steel housing.
LED27 2700K LED3 3000KLED35 3500KLED4 4000K
FLSH Flush LensREG 1˝ Regressed Lens
LO Low MO Me-dium SO Stan-dardHO HighPROG Pro-gram-mable Light Out-put (Specify desired lm/ft or w/ft)
TMW Textured Matte White Standard
YGW Gloss WhiteY__ Premium ColorCC Custom Color
ABW Acrylic Batwing Lens (D1X Only)
SAL Satin Acrylic (D1 Only)
AWL Acrylic Wall Wash Lens (D1W Only)
AWW Acrylic Wall Grazer Lens (D1G Only)
UNV (120-277)
SC Single Circuit
D1X Symmetric Batwing w/ 1.4 sc (ABW lens only)
D1 Direct (SAL lens only)
D1W Wall Wash (AWL lens only)
D1G Wall Grazer (AWW Only)
D1R Asymmetric to Room (AWL Only)
X1 T-Bar 15/16X1M T-Bar 9/16X2 Dimensional T-bar Armstrong Interlude®X6 Slot GridX3 Hard Ceiling Flange TrimX7BF Hard Ceiling Trimless Mud-over Backer FlangeM Mixed Ceiling
ND Non-DimmingDM10 0-10v 10% Dim-ming (Standard)
DM01 0-10v 1% DimmingSTEP Step Dimming 100-50-OffDML 1% Lutron DimmingDMD 0.1% DALI DimmingDMG 1% DALI Dimming
EML Emergency Battery, Low (D1, D1W ~ 850 delivered lumens, D1G ~ 600)
EMH Emergency Battery, High (D1, D1W ~1175 delivered lumens, D1G ~ 900)
M1 12˝ MR16 module (adj.) 1/50w (max) lampM2 12˝ MR16 module (adj.) 2/50w (max) lampM4 Cross MR16 module (adj.) 1/50w (max) lampC2 90° 2-Way Lit CornerC3 T-Shape 3-Way ConnectorC4 90° 4-Way Mitered ConnectorC8 Wall to Ceiling ConnectorPRUBIN Note: All MR16s by others
TRIM COLOR
NOMLNGTH
OUT-PUT
LEDCOLOR
LENSPOSITION
SERIES SHIELDING VOLT-AGE
CIRCU-ITING
DISTRIBUTION CEILINGSYSTEMS
CONTROLS OPTIONS
Type:
Job:
5LED WARRANTY
YEAR5
LED WARRANTY
YEAR
*
41⁄16˝
67⁄16˝
5˝
6”
57⁄16˝
5˝
41⁄16˝
ABW-D1X
ABW-D1X
SAL-D1
AWL-D1W
SAL-D1 AWL-D1R/W AWW-D1G
*BIO-FLSH-LED4LO-ABW, BIO-FLSH-LED4LO-SAL-D1 and BIO-FLSH-LED4LO-AWL-D1W are DLC QPL listed. For other DLC listings, please consult factory.
5˝
6˝
67/16˝57/16˝
41/16˝41/16˝
5˝
BIO-STD
Stan-dard
LOW MEDIUM STANDARD HIGH
lm/ft 425 665 900 1080w/ft 5 7 10 12
lm/ft 425 665 900 1080w/ft 5 7 10 12
lm/ft 425 665 900 1080w/ft 5 7 10 12
Lumen output may vary +/- 5% 4000K used for lm/ft estimates above 3500K –2% llf, 3000K –4%, 2700K –6%See LED Details PDF for more info
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Bionic™ | Recessed Linear & Wall WashLED
2Recessed Linear02-02-2015
LUMEN MAINTENANCE Designed to last with cool running mid-power LEDs projected to
maintain 90% (L90) of their initial output for 100,000 hours (at HO), and L70 exceeding 150,000 hours.
LED SYSTEM LED modules and drivers are field replaceable.
PROG (optional) Programmable light output. Specify desired lumens or watts per linear foot. Min: 2.5 w/ft, consult factory for requests above 12 w/ft.
BINNING Standard binning (all Prudential LED boards) includes testing at the chip level and board integration to provide consisten color temperature within a 3-step MacAdam ellipse, with +/- 5% lumen output range and +/- .004 Duv.
PRUBIN™ Prudential Ltg’s exclusive ‘job binning’ method that ensures color temperature consistency across all luminaires on a project. Meticulously testing and labeling EVERY LED board to +/- 25 lumens, +/- 50k CCT and +/- .004 Duv — while also separating positive from negative — allows us to match color, hue and intensity throughout a project and provides a consistent color temperature within a 2-step MacAdam ellipse.
LABELS ETL damp labeled and I.B.E.W. manufactured
ELECTRICAL Must specify LED dimming controls. LED fixtures have constant current driver(s) with less than 20% THD when loaded to a minimum of 60%. Drivers sink a maximum of 6mA per driver. DM10 LED drivers are 0-10V dimmable and are compatible with most 0-10V wall slide dimmers and direct 0-10V analog signal dimmers. Max driver size 1.25˝ w x 1˝ h.
CONSTRUCTION
Housing Extruded aluminum>25% PC recycled, 100% recyclable
Lens Acrylic, 100% recyclable
MOUNTING Recessed into drywall or T-bar ceilings
WARRANTY Single-source, 5 year limited warranty covers standard components and construction
Vertical Angle 0 25 45 65 90
0 621 621 621 621 621
5 616 621 630 638 641
15 585 615 657 683 695
25 527 586 643 665 670
35 447 525 577 592 591
45 354 432 476 464 440
55 258 319 344 299 266
65 169 210 213 170 149
75 86 99 96 75 67
85 23 21 19 17 16
90 0 0 0 0 0
Vertical Angle 0 25 45 65 90
0 769 769 769 769 769
5 762 763 763 760 760
15 720 717 709 698 693
25 642 632 612 592 582
35 538 522 494 469 457
45 421 403 373 349 337
55 303 303 263 243 234
65 199 188 171 157 151
75 100 93 84 78 75
85 24 23 21 21 20
90 0 0 0 0 0
Vertical Angle 0 22.5 45 67.5 90
0 923 923 923 923 923
5 1103 1091 1051 987 921
15 1806 1684 1395 1116 895
25 2434 2424 2012 1249 244
35 1799 1887 2127 1401 764
45 1227 1271 1460 1409 650
55 784 804 884 1075 499
65 450 461 488 602 317
75 195 203 203 245 145
85 29 31 34 40 25
90 0 0 0 0 0
BATWING DISTRIBUTION SAL DISTRIBUTION WALL WASH
Low Output:BIO-FLSH-LED4LO-ABW-D1X1784 Delivered Lumens19 Watts94 lm/w84 CRI28 R94000 CCTLight Labs Test #LL041412303R01
Zonal Lumen Summary:0-90 = 100%
Low Output:BIO-FLSH-LED4LO-04-SAL-D11682 Delivered Lumens19 Watts88 lm/w84 CRI28 R94000 CCTLight Labs Test #L041412304R01
Zonal Lumen Summary:0-90 = 100%
Standard Output:BIO-STD-LED3SO-AWL-D1W3184 Delivered Lumens39 Watts82 lm/w82 CRI15 R93000 CCTLight Labs Test #32216
Zonal Lumen Summary:0-90 = 100%621 769 923
(OPTIONAL)
Prudential Ltg. reserves the right to change design specifications or materials without notice. Please visit www.prulite.com for most current data. © 2014 All rights reserved – All products manufactured at: Prudential Ltg. 1774 E. 21st Street, Los Angeles, CA 90058
PRULITE.COM 213.746.0360
Bionic™ | Recessed Linear & Wall WashLED
3Recessed Linear02-02-2015
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7⁄16”
5”
4 1⁄16”6”
5”
4 1⁄16”
5 7⁄16”
(m2) (c2)Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer �ange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11⁄8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7⁄16”
5”
4 1⁄16”6”
5”
4 1⁄16”
5 7⁄16”
(m2) (c2)Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer �ange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11⁄8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
Bionic Wall Wash visual continuity with Bionic open office SAL lens
(m2)(m1)
MOUNTING LOCATIONS
CONNECTORS
(c2)
X1 Adjoining detail
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
version Bversion A
version A version B
version A
Bionic Spec Illos 6 Jan 2015
6 7/16”
5”
4 1/16”6”
5”
4 1/16”
5 7/16”
(m2) (c2)
Connectors
90°
(2) MR 16
5” 12”
12”(m1)
12”
(1) MR 16
5” 5”
Mounting Detail (1) Housing Detail for ¼” - 20 Mounting Conversion Chart
9”
15”
21”
27”
33”
39”
45”
2’Y (From centerline)X
3’
4’
5’
6’
7’
8’
X
YY
¼” Wiring K.O.
Mounting Conversion Chart
9” 15” 21” 27” 33” 39” 45”
2’
Y =*
X = 3’ 4’ 5’ 6’ 7’ 8’
* From centerline
Hanging Drywall Detail
Option to hang drywallfrom backer flange X7BF
Install Options Suspension
Hang ¼-20 orwire from adjustablewire from adjustablehanger bracket
4 optional mounting¼-20 rod positions
Housing knock-outs for ¼-20
Extruded aluminumwall rail (included)
.67”.64”
1”
.64”
1”
.44”
1”
.64”
1”11/8”
X1 X1m X2 X6 X3 X7BF
D1W/D1G Reflector
LED array opposite wall side
Wall
WALL WASH REFLECTOR ORIENTATION4˝
5˝
37/
AWL Lens
Groove on LED side
D1W90TMW
AWL Lens
Smooth lens face
Groove on LED side
Bionic LED | Lens orientation
Wall Wash Wall Graze
D1W-AWL
57/16
5˝
41/16˝
D1G90TMW
AWW Lens
Groove on LED side
Prisms on both sides
D1G-AWW
6¾
87/1 67/1
6¾ 6¾
57/1
43/343/3
4˝
5˝
37/
WALL WASH LENS ORIENTATION