LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C....
Transcript of LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C....
![Page 1: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/1.jpg)
C. Qian - ECRIS2020, MSU, 1
LECR5 Development and Status ReportC. Qian1,2, L. T. Sun1,2, Z. H. Jia1,3, W. Lu1, L. B. Li1,2, X. Fang1, J. W. Guo1, J. J. Chang1, J.
R. An1, J. D. Ma1, H. Wang1, Y. M. Ma1, Y. C. Feng1, X. Z. Zhang1, and H. W. Zhao1,2
1)Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China2)School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing
100049, China3)School of Nuclear Science and Technology, Lanzhou University, Lanzhou 730000, China
E-mail address: [email protected]
![Page 2: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/2.jpg)
C. Qian - ECRIS2020, MSU, 2
Design of LECR5
Testing setup and Platform construction
Commissioning for Ion Beams• Gaseous ion beams production• Metal ion beams production
Summary
Outline
![Page 3: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/3.jpg)
C. Qian - ECRIS2020, MSU, 3
Design of LECR5
Testing setup and Platform construction
Commissioning for Ion Beams• Gaseous ion beams production• Metal ion beams production
Summary
Outline
![Page 4: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/4.jpg)
C. Qian - ECRIS2020, MSU, 4
Background introduction
DTL + RFQ
Synchrotron0.28 ~ 2.8 T·m
MEBT
HEBT
LEBT
Space Environment Simulation Research Infrastructure (SESRI)Heavy Ion Energy 8 ~ 85 MeV/u (Proton Energy100 ~ 300 MeV)
Ions Current Ion energy NRMS
H2+ ≥250 euA
4 keV/u
≤0.24He2+ ≥200 euA
≤0.1584Kr18+ ≥84 euA209Bi32+ ≥50 euA
The requirement of the ECR ion source
ECRIS
![Page 5: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/5.jpg)
C. Qian - ECRIS2020, MSU, 5
Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz (eμA) LECR4-18 GHz (eμA)40Ar 8+ 310 1100 1717
9+ 200 720 1075
11+ 105 325 503209Bi 28+ 45 207Pb30+/18 118
31+ 20 70
Design considerations of ECRIS
• All permanent Magnet ECRIS and 14.5 GHz room temperature
ECRIS can’t meet the requirement of the bismuth ion beam.
• High performance 18 GHz room temperature ECRIS can meet all ion
beam requirements.
Beam intensity produced by two types of typical ECRIS in IMP
![Page 6: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/6.jpg)
C. Qian - ECRIS2020, MSU, 6
Design parameters of LECR5
LECR5 LECR4 SECRAL(18 GHz)f (GHz) 18 18 18Binj (T) ≥2.5 2.4 2.5
Bmin (T) 0.33~0.53 0.53 ~0.5Bext (T) ≥1.2 1.3 1.4Brad (T) ≥1.2 (r=40) ~1.0 (r=38) 1.4 (r=63)
Mirror length 340 mm 307 mm 420 mmPlasma Chamber 80 mm 76 mm 126 mm
Design parameters in comparison of other ECRIS
The magnetic field configurations of the LECR5 are similar for those
of SECRAL operating at 18 GHz.
• Injection and radial magnetic field as high as possible.
• The minimum magnetic field in the middle can be adjusted.
• Plasma chamber as large as possible.
![Page 7: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/7.jpg)
C. Qian - ECRIS2020, MSU, 7
Layout structure of LECR5
Extraction CoilsInjection Coils
Middle Coils for Bmin
Hexapole Magnet(Halbach-36 blocks)
L: 620 mm
D: 640 mm
Insert Iron for Binj
Φin=88 mmΦout=188 mm
![Page 8: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/8.jpg)
C. Qian - ECRIS2020, MSU, 8
Design of LECR5
Testing setup and Platform construction
Commissioning for Ion Beams• Gaseous ion beams production• Metal ion beams production
Summary
Outline
![Page 9: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/9.jpg)
C. Qian - ECRIS2020, MSU, 9
Source Assembly of LECR5Injection component Plasma Chamber and
Hexpole MagnetPlasma Electrode
Screening Electrode andGround Electrode
Axial Coils
Insulating Layer
![Page 10: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/10.jpg)
C. Qian - ECRIS2020, MSU, 10
Radial magnetic field of LECR5
-1.3
-1.1
-0.9
-0.7
-0.5
-0.3
-0.1
0.1
0.3
0.5
0.7
0.9
1.1
1.3
0 40 80 120 160 200 240 280 320 360Br (T
)
Angle(°)
R=40 mm Measurement Dates
![Page 11: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/11.jpg)
C. Qian - ECRIS2020, MSU, 11
Axial magnetic field of LECR5
0.00
0.50
1.00
1.50
2.00
2.50
3.00
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340
Bz
(T)
Z (mm)
1300-500-1200-Caculation
1300-500-1200-Measurement
Insert Iron
100%
Plasma Electrode
![Page 12: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/12.jpg)
C. Qian - ECRIS2020, MSU, 12
Testing Platform of LECR5
LECR5Solenoid
Dipole
Beam Diagnostic
![Page 13: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/13.jpg)
C. Qian - ECRIS2020, MSU, 13
Beam optical design of Testing PlatformHV=8 kV, I0= 1.5 emA, H2
+=500 euA, SSC=70%Beam spot size X emittance Y emittance
HV=26.125 kV, I0= 5.0 emA, Bi32+=65 euA, SSC=70%Beam spot size X emittance Y emittanceBeam spots position
![Page 14: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/14.jpg)
C. Qian - ECRIS2020, MSU, 14
Performance Testing of LECR5Data:01-18-2020
0
500
1000
1500
2000
2500
0 0.5 1 1.5 2 2.5
Beam
Inte
nsity
(eμA
)
Microwave Power (kW)
LECR4 SECRAL@18 GHz
Testing conditions:
•Heating frequency: 14.5 +18 GHz
•Plasma chamber material: Stainless steel
•Plasma Electrode Aperture: Φ8 mm
•Screening Electrode Aperture: Φ16 mm
•FC Negative Biased Voltage: -150 V
O6+
LECR5 has demonstrated its performance.
![Page 15: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/15.jpg)
C. Qian - ECRIS2020, MSU, 15
Design of LECR5
Testing setup and Platform construction
Commissioning for Ion Beams• Gaseous ion beams production• Metal ion beams production
Summary
Outline
![Page 16: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/16.jpg)
C. Qian - ECRIS2020, MSU, 16
Gaseous Ion Beams Production385eμA-40Ar12+
0
20
40
60
80
100
120
140
160
180
200
90 95 100 105 110 115 120 125 130
Beam
Inte
nsity
(eμA
)
Dipole Current (A)
23+
HV=28 kV, I0=2.64 emASV=-0.9 kV, IS=0 emAP18GHz=1.5 kW, 23+Iq=73 eμA
24+25+
26+
22+ 21+ 20+ 19+18+
17+
O3+/16+O4+O5+
15+
Optimizing the production of highly charged krypton ion beams
Tuning Conditions:• Heating frequency: Single 18 GHz• Plasma chamber material: Stainless steel• Plasma Electrode Aperture: Φ8 mm
• Screening Electrode Aperture: Φ16 mm• FC Negative Biased Voltage: -150 V
![Page 17: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/17.jpg)
C. Qian - ECRIS2020, MSU, 17
Gaseous Ion Beams Production338eμA-129Xe20+
145eμA-129Xe27+
Optimizing the production of highly charged xenon ion beams
0
50
100
150
200
250
300
350
400
100 110 120 130 140 150 160
Beam
Inte
nsity
(eμA
)
Dipole Current (A)
HV=28 kV, I0=4.31 emASV=-0.9 kV, IS=0 emAP18GHz=1.5 kW, 27+Iq=145 eμA
17+18+19+20+21+22+23+
25+26+
27+
28+
29+30+
31+
O4+ O3+/24+ O2+/16+
16+
Tuning Conditions:• Heating frequency: Single 18 GHz• Plasma chamber material: Stainless steel• Plasma Electrode Aperture: Φ8 mm
• Screening Electrode Aperture: Φ16 mm• FC Negative Biased Voltage: -150 V
![Page 18: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/18.jpg)
C. Qian - ECRIS2020, MSU, 18
Gaseous Ion Beams Production
LECR5 has the potential to produce intense highly charged ion beams.
Ions Charged State LECR5(eμA)18 GHz<2 kW
LECR4(eμA)18 GHz<2 kW
SECRAL(eμA)18 GHz <3.2 kW
16O 6+ 2120 21107+ 458 560
16Ar 11+ 521 62012+ 385 430 51014+ 121 185 27016+ 25 23 73
86Kr 18+ 22020+ 12023+ 7326+ 32
209Xe 20+ 338 430 50523+ 263 27526+ 200 205 41027+ 145 135 30628+ 104 92
Gaseous ion beam results of LECR5 in comparison with other ECR ion sources
![Page 19: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/19.jpg)
C. Qian - ECRIS2020, MSU, 19
Intense highly charged Ion beam Emittance
HV=28 kV, Io=4.31 emA, 129Xe27+=145 eμA
H: 0.1(nrms) V:0.11(nrms)
![Page 20: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/20.jpg)
C. Qian - ECRIS2020, MSU, 20
Metal Ion Beams ProductionMicro-oven
Off-line test results
Micro-Oven 2D Section
Tuning Conditions:• Heating frequency: 14.5 +18 GHz• Plasma chamber material: Aluminum• Micro-oven port Aperture: Φ4 mm• Plasma Electrode Aperture: Φ8 mm• Screening Electrode Aperture: Φ16 mm• FC Negative Biased Voltage: -150 V
![Page 21: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/21.jpg)
C. Qian - ECRIS2020, MSU, 21
0
10
20
30
40
50
60
98 103 108 113 118 123 128 133 138 143 148
Beam
Inte
nsity
(eμA
)
Dipole Current (A)
HV=25 kV, I0=1.28 emASV=-0.4 kV, IS=0.22 emAP18GHz=1.8 kW, P14.5GHz=0.26 kW41+Iq=22 eμA,
2527
2829
303132
3334353637
3840
414243
4445
4647
48
O4+ O3+ O2+
49
Optimizing the production of highly charged bismuth ion beams
LECR5 can produce highly charged heavy ion beams.
Metal Ion Beams Production
![Page 22: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/22.jpg)
C. Qian - ECRIS2020, MSU, 22
81eμA-Bi32+
41eμA-Bi36+
Ion Beam Spots with different charged state.
Metal Ion Beams Production
![Page 23: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/23.jpg)
C. Qian - ECRIS2020, MSU, 23
Ions Charged State LECR5(eμA)14.5+18 GHz<2.2 kW
LECR4(eμA)18 GHz<2 kW
SECRAL(eμA)18 GHz <3.2 kW
209Bi 30+ 119 191
31+ 101 92 150
32+ 81 63
41+ 22 22
45+ 12.5 1550+ 3.8 1.5
Bismuth ion beam results of LECR5 in comparison with other ECR ion sources
X:0.07(nrms) Y:0.09(nrms)
Metal Ion Beams Production
![Page 24: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/24.jpg)
C. Qian - ECRIS2020, MSU, 24
Commissioning for project requirements
Ions Intensity(eμA) X (nrms) Y (nrms)H2
+ 266>250 0.14<0.2 0.15<0.24He2+ 204>200 0.15 ≤ 0.15 0.14<0.15
84Kr18+ 88>84 0.09<0.15 0.11<0.15209Bi32+ 51>50 0.05<0.15 0.05<0.15
Results of ion beams commissioning in comparison with requirements
SlitX=12mmSlitY=12mm
SlitX=14mmSlitY=12mm
SlitX=10mmSlitY=12mm
SlitX=12mmSlitY=16mm
H2+ 4He2+ 84Kr18+ 209Bi32+
![Page 25: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/25.jpg)
C. Qian - ECRIS2020, MSU, 25
LECR5 Milestone and Status
02. 2016 ─ Project proposed, called LECR5-SESRI.
07. 2018 ─ Final Overall design finished.
07. 2019 ─ Overall assembly and first beam analyzed at IMP.
04. 2020 ─ LECR5-SESRI commissioning for intense highly
charged ion beams.
Next: Ready to transport to Harbin, Commissioning with RFQ.
![Page 26: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/26.jpg)
C. Qian - ECRIS2020, MSU, 26
Design of LECR5
Testing setup and Platform construction
Commissioning for ion beams• Gaseous ion beams production• Metal ion beams production
Summary
Outline
![Page 27: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/27.jpg)
C. Qian - ECRIS2020, MSU, 27
Summary
1. A high performance 18 GHz room temperature ECR ion source was
successfully constructed.
2. Some outstanding results of highly charged ion beams have been
produced.
3. Excellent quality of intense heavy ion beam has been obtained.
Better results will be obtained by further optimizing conditions:
1. Multi-frequency heating.
2. Higher microwave power up to 3 kW.
![Page 28: LECR5 Development and Status Report...32+ ≥ 50 euA The requirement of the ECR ion source ECRIS C. Qian - ECRIS2020, MSU, 5 Ions Charged State LAPECR2 (eμA) LECR3-14.5 GHz(eμA)](https://reader033.fdocuments.in/reader033/viewer/2022052105/6040cb1046ebac55b353baf7/html5/thumbnails/28.jpg)
C. Qian - ECRIS2020, MSU, 28
谢谢!Thanks for your attention!