Leakproof FMA® moving floor - Legras-Industries · Leak proof FMA® Floor FMA® Semi-trailers Our...
Transcript of Leakproof FMA® moving floor - Legras-Industries · Leak proof FMA® Floor FMA® Semi-trailers Our...
Leak proof FMA® Floor
FMA® Semi-trailers
Our range of FMA® Moving floor trailers
Stamp of dealer
Side doors Scandinavian
General Purpose Transfer
Heavy duty
For high moisture content cargo
Leakproof FMA® moving floor
FMA® slats
Emptying valve
Liquids collecting
chanels
Rear tank 130 liters or more
Emptying and access for cleaningAccess Hatch for high pressure cleaning Front recovery gutters
P-N
2-F
MA-F
LOO
RS-E
NG
/ D
ocu
men
t non c
ontr
actu
el
/ ©
Leg
ras
Indust
ries
2016
Legras industries : 37, rue Marcel-Paul, BP 204, 51206 Epernay Cedex - FranceTél (+33) 3 26 53 32 10 - Fax (+33) 3 26 51 77 33 - Email : [email protected]
Legras industries is a member of the CARCOSERCO and the FAMADwww.legras.fr
Unbeatable life time Unique technology
The end cap is welded below and above the slat
Sliding steel plate (treated Dacromet)
Each bearing is fitted with a U bolt to an aluminum cross-member
Compatible with up to 9 t forklift
HDPE Sliding bearings
The Legras bearing has a high
resistance to abrasion and impact
giving unrivalled long life. Has
high resistance to cracking. Its
shape prevents the slats from
lifting up. It is fixed with a U bolt
so it cannot slide away with the
slat.
Slats end caps
Critical area where most efforts
and wearing effects take place. The
Legras end caps are designed to bear
all these constraints and prevent
product ingress into the slats.
vertical ribsLegras is the sole manufacturer to offer a full range of floor profiles with vertical ribs giving a better impact resistance and life time expectancy.
Double contact support
Effort is spread over a larger surface area. Maximised sliding surface.
All Legras aluminium floors can be turned to increase service life !
Full length steel chassisSolid welded rear end capsHigh resistance bearings
A combination of optimum technical solutions
Thickness : 7 mm
Thickness : 7 mm
3 mm
3 mm
Thickness : 14 mm
3 mm
Thickness : 7 mm
3 mm
Type 7 and 10 heavy duty Application : heavy products such as household waste, wood logs, etc ... Guaranteded up to 9 t forklift.
Application : Commercial, industrial, black bag and comingled with glass waste.
Type 7 and 10 smoothApplication : fragile products such as paper reels, potatoes etc ... Guaranteded up to 9 t forklift.
Leakproof floor Application : municipal waste with leachates household waste, green waste. Leachates are channeled to a 130 Litres tank.
Overlapping floor Type 14Application : metallic waste, gravel, abrasive products.Guaranteded up to 9 t forklift.
Strong and hardwearing rear sliding plate
Type 17 : Super heavy duty «Impact Plus»
The Legras FMA® floors are compatible with all brands of Hydraulic drive units