Lead-Lined Cabinetry · Capintec quality for all of your lead-lined cabinetry and radiation...

Lead-LinedCabinetryLead-LinedCabinetry

Everything about Capintec’s lead-lined cabinetry conveys quality. Attention to detail is what you expect from Capintec...and that’s what you get. Relying on the design, strength and durability of our materials, our line of cabinetry offers multiple options and configurations while assuring safety, easy decontamination & sanitization. They have been specifically designed for use in all areas where radionuclides and radioactive sources are stored, handled, or used.

Our standard line is now available in 3 cabinet widths to meet the needs and space requirements of any lab. You can choose from a selection of pre-configured or specialized cabinet models; configure your own from our selection of “shells” and “inserts” or have cabinets manufactured to your exact specifications.

All of our lead-lined cabinets have been designed with you in mind. They are attractive, and provide the ultimate in versatility and flexibility. Each cabinet may be used as an individual storage module, or combined with other models. They may be easily arranged to meet the changing needs of your department, without the need for time consuming and expensive renovations or alterations. Continuous countertops are available in either stainless steel or optional Corian®.

When quality and performance count, you deserve the peace of mind that comes from your decision to select Capintec products. For over 50 years, Capintec is the company you have relied on and trusted for all of your nuclear medicine product needs. Now, you can rely on Capintec quality for all of your lead-lined cabinetry and radiation shielding products!

Lead-Lined Cabinetry• Frames and work surfaces constructed with AISI 304 stainless

steel to assure easy decontamination and durability• Work surfaces with raised smooth edges to isolate fluid spills and

facilitate quick removal of residual contamination• Design and construction ensures resistance to most corrosive

compounds utilized in laboratories and pharmacies• Choice of 1/4”, 1/2” or 1” lead shielding• All drawers shielded with 1/2” lead• Fully shielded on all sides with solid sheet lead• Corner and door lead shielding is overlapped and consistent with

lead thickness• Doors feature surface mounted key locks to ensure the integrity

of the lead shielding• Heavy duty stainless steel door hinges• Doors can be hinged on right or left• Stainless steel interior and exterior completely encases lead

shielding• Durable powder-coated steel exterior available on request• All inserts are fabricated from stainless steel • Stainless steel countertops with 4” backsplash and spill proof edge• Medical grade DuPont® Corian® countertops including a 4” high

backsplash and spill proof edge, available on request• Optional storage wells and sharps port are available

All Cabinets Feature:

30 Inch Wide Cabinets:4 Drawer Work Station ................................................................ 34 Drawer Waste Storage ............................................................... 3Standard Storage Cabinet ............................................................. 4Standard Waste Cabinet ............................................................... 4

22 Inch Wide Cabinets:Small Storage Cabinet .................................................................. 5Small Waste Cabinet .................................................................... 5

39 Inch Wide Cabinets:Large Flood Waste Storage ........................................................... 68 Drawer Work Station ................................................................ 7Large Storage Cabinet .................................................................. 7

Pre-Configured Cabinet Models

PET Unit Dose Cabinet ............................................................... 6PET Unit Dose Table ................................................................... 8

Specialized Models2

The 30 inch Four Drawer Work Station is one of Capintec’s most versatile designs. The cabinet has 4 drawers with easy-glide rollers for nearly effortless operation, and enough space to hold a variety of items -- radioactive or not. Next to the drawers are 2 adjustable

shelves, with a capacity of 80 lbs. each to hold radioactive materials or waste for decay. In addition, the work surface provides a wide-open space with a 4” backsplash and a spill-restricting lip.

4 Drawer Work Station

Designed to do it all, the 30 inch Four Drawer Waste Storage Unit has drawers to hold your radioactive sources and a large storage area for holding or decay of radioactive waste. With a 6” diameter

stainless steel lined port, a 1/2” thick lead shielded lid in the work surface and a 19 gallon sharps container, this cabinet is an efficient addition to your work area.

DIMENSIONS• Overall: 40”H x 30”W x 24” D (101.6 x 76.2 x 60.9 cm)• Waste Area: 25 3/4”H x 16”W x 18 3/4”D (65.4 x 40.6 x 47.6 cm)• Drawers: 6”H x 6 1/2”W x 17 1/2”D(15.2 x 16 1/2 x 44.4 cm)• Weights: 1,260 lbs. (1/4” lead thickness); 1,720 lbs. (1/2” lead thickness); 2,530 lbs.

(1” lead thickness)

ITEM NUMBERSStainless Steel Cabinet with 1/4” Lead .......................................................... 5000-2021Stainless Steel Cabinet with 1/2” Lead .......................................................... 5000-2022 Stainless Steel Cabinet with 1” Lead ............................................................. 5000-2023

• Four stainless steel drawers with leaded fronts• Lever disconnect drawer glides for easy removal• Each drawer can hold up to 80 lbs.• 19 gallon sharps container• 6” diameter stainless steel lined waste port• 1/2” lead shielded lid

4 Drawer Waste Storage

• Four stainless steel drawers with leaded fronts• Lever disconnect drawer glides for easy removal• Each drawer can hold up to 80 lbs.• Two stainless steel adjustable height shelves

DIMENSIONS• Overall: 40”H x 30”W x 24” D (101.6 x 76.2 x 60.9 cm)• Shelf Area: 25 3/4”H x 16”W x 18 3/4”D (65 2/5 x 40 3/5 x 47 3/5 cm)• Drawers: 6”H x 6 1/2”W x 17 1/2”D (15 1/5 x 16 1/2 x 44 2/5 cm)• Weights: 1,260 lbs. (1/4” lead thickness); 1,720 lbs. (1/2” lead thickness); 2,530 lbs.



3

The 30 Inch Storage cabinet is a highly flexible unit with 2 adjustable shelves and plenty of space to store radioactive materials

or decay radioactive waste. Each of the shelves has a capacity of 80lbs. Additional shelves can be purchased separately at any time.

DIMENSIONS• Overall: 40”H x 30”W x 24” D (101.6 x 76.2 x 60.9 cm)• Shelf Area: 25 3/4”H x 24 1/2”W x 18 3/4”D (65.4 x 62.2 x 47.6 cm)• Weights: 990 lbs. (1/4” lead thickness); 1,390 lbs. (1/2” lead thickness); 2,130 lbs.



• Two stainless steel adjustable height shelves

Standard Storage Cabinet

The 30 Inch Waste Cabinet is the ideal space to safely store all of your radioactive waste. The 19 gallon sharps containers will handle significant quantities of materials, which can be stored in the

cabinet for decay or until they are moved to a separate decay area. The countertop has a 6” diameter stainless steel lined port with a 1/2” shielded lid for easy access to the active waste container.

DIMENSIONS• Overall: 40”H x 30”W x 24” D (101.6 x 76.2 x 60.9 cm)• Waste Area: 25 3/4”H x 24 1/2”W x 18 3/4”D (65.4 x 62.2 x 47.6 cm)• Weights: 1,090 lbs. (1/4” lead thickness); 1,540 lbs. (1/2” lead thickness); 2,410 lbs.


ITEM NUMBERS

Stainless Steel Cabinet with 1/4” Lead .......................................................... 5000-2041Stainless Steel Cabinet with 1/2” Lead .......................................................... 5000-2042Stainless Steel Cabinet with 1” Lead ............................................................. 5000-2043

• Two 19 gallon sharps containers• 6” diameter stainless steel lined waste port• 1/2” lead shielded lid

Standard Waste Cabinet

4

Capintec’s new small cabinet, a great space saver! The 22 Inch Storage cabinet is a highly flexible unit with 2 adjustable shelves and plenty of space to store radioactive

materials or decay radioactive waste. Each of the shelves has a capacity of 80 lbs.

DIMENSIONS• Overall: 40”H x 22”W x 24” D (101.6 x 55.8 x 60.9 cm)• Shelf Area: 25 3/4”H x 16”W x 18 3/4”D (65.4 x 40.6 x 47.6 cm)• Weights: 890 lbs. (1/4” lead thickness); 1,250 lbs. (1/2” lead thickness); 1,890 lbs.




Small Storage Cabinet

Capintec’s new small cabinet, a great space saver! The 22 Inch Waste Cabinet is the ideal space to safely store all of your radioactive waste. The 19 gallon sharps container will handle significant quantities of materials, which can be stored in the

cabinet for decay or until they are moved to a separate decay area. The countertop has a 6” diameter stainless steel lined port with a 1/2” shielded lid for easy access to the active waste container.

DIMENSIONS• Overall: 40”H x 22”W x 24” D (101.6 x 55.8 x 60.9 cm)• Waste Area: 25 3/4”H x 16”W x 18 3/4”D (65.4 x 40.6 x 47.6 cm)• Weights: 890 lbs. (1/4” lead thickness); 1,250 lbs. (1/2” lead thickness); 1,890 lbs.



• Spacious Cabinet with 19 gallon sharps container• 6” diameter stainless steel lined waste port• ½” lead shielded lid

Small Waste Cabinet

5

Capintec’s new large cabinet! The 39 inch Large Flood Waste Storage Cabinet has room for everything; a vertical storage location for flood sources and phantoms, 4-drawers for storing radioactive materials, and a waste area. The 19 gallon sharps container will handle significant

quantities of materials, which can be stored in the cabinet for decay or until they are moved to a separate decay area. The countertop has a 6” diameter stainless steel lined port with a 1/2” shielded lid for easy access to the active waste container.

DIMENSIONS• Overall: 40”H x 39”W x 24” D (101.6 x 99 x 60.9 cm)• Waste Area: 25 3/4”H x 16”W x 18 3/4”D (65.4 x 40.6 x 47.6 cm)• Drawers: 6”H x 6 1/2”W x 17 1/2”D (15.2 x 16 1/2 x 44.4 cm)• Weights: 1,720 lbs. (1/4” lead thickness); 2,230 lbs. (1/2” lead thickness); 3,200 lbs.


ITEM NUMBERSStainless Steel Cabinet with 1/4” Lead .......................................................... 5000-2081Stainless Steel Cabinet with 1/2” Lead .......................................................... 5000-2082Stainless Steel Cabinet with 1” Lead ............................................................. 5000-2083

• Four stainless steel drawers with leaded fronts• Lever disconnect drawer glides for easy removal• Each drawer can hold up to 80 lbs.

Large Flood Waste Storage

DIMENSIONS• Overall: 40”H x 30”W x 24” D (101.6 x 76.2 x 60.9 cm)• Interior (excluding positron and shielded waste container:

25 3/4”H x 24 1/2”W x 18 3/4”D (65.4 x 62.2 x 47.6 cm)

ITEM NUMBERSWith 1/2” Lead (Total Weight 1,710lbs.) ................................................... 5000-2072With 1” Lead (Total Weight: 2,500 lbs.) ..................................................... 5000-2073

RECOMMENDED ACCESSORIESPositron Shield (Weight: 560 lbs.) ................................................................ 7300-29031” Lead PET Shielded Waste Container with Locking Lid ............................ 5730-2271

OPTIONAL ACCESSORIES511 L-Block (Total Weight: 195 lbs.) ............................................................ 0665-2014 Brick Kit for 511 L-Block & PET Unit Dose Cabinet (Weight: 730 lbs.) ....... 5520-20449

• Raised dose calibrator readout mount for easy viewing• Countersunk calibrator chamber mount• Waste Penetration fits shielded sharps container• Supports 511 L-Blocks• Stainless steel countertop and 1” Lead Shielding standard

PET Unit Dose CabinetCompact 30 inch design for PET hot labs with limited space.

6

Capintec’s new large cabinet! The 39 inch Eight Drawer Work Station is a step up from the Four Drawer Work Station. The cabinet has 8 drawers with easy-glide rollers for nearly effortless operation, and enough space to hold a variety of items -- radioactive or not. Next to the drawers are 2

adjustable shelves, with a capacity of 80 lbs. each to hold radioactive materials or waste for decay. In addition, the countertop provides a wide-open space with a 4” backsplash and a spill-restricting lip.

DIMENSIONS• Overall: 40”H x 39”W x 24” D (101.6 x 99 x 60.9 cm)• Shelf Area: 25 3/4”H x 16”W x 18 3/4”D (65.4 x 40.6 x 47.6 cm)• Drawers: 6”H x 6 1/2”W x 17 1/2”D (15.2 x 16 1/2 x 44.4 cm)• Weights: 1,770 lbs. (1/4” lead thickness); 2,300 lbs. (1/2” lead thickness); 3,290 lbs.


ITEM NUMBERSStainless Steel Cabinet with 1/4” Lead .......................................................... 5000-2091Stainless Steel Cabinet with 1/2” Lead .......................................................... 5000-2092Stainless Steel Cabinet with 1” Lead ............................................................. 5000-2093

• Eight stainless steel drawers with leaded fronts• Lever disconnect drawer glides for easy removal• Each drawer can hold up to 80 lbs.• Two stainless steel adjustable height shelves

8 Drawer Workstation

Capintec’s new large cabinet!The 39 Inch Storage cabinet is a highly flexible unit with 2 adjustable shelves and plenty of space to store radioactive materials

or decay radioactive waste. Each of the shelves has a capacity of 80 lbs.

DIMENSIONS• Overall: 40”H x 39”W x 24” D

(101.6 x 99 x 60.9 cm)• Shelf Area: 25 3/4”H x 32 3/4”W x 18 3/4”D

(65.4 x 83.2 x 47.6 cm)• Weights:

1,480 lbs. (1/4” lead thickness); 2,020 lbs. (1/2” lead thickness); 3,000 lbs. (1” lead thickness)

ITEM NUMBERS

Stainless Steel Cabinet with 1/4” Lead ..........................................................5000-2101Stainless Steel Cabinet with 1/2” Lead..........................................................5000-2102Stainless Steel Cabinet with 1” Lead.............................................................5000-2103


Large Storage Cabinet

7

The PET Unit Dose Table provides a safe, compact and economical dose dispensing hot lab center for PET or high energy therapy doses. The dose calibrator and waste shield are flush mounted to optimize work surface area. Sturdy bottom shelf offers convenient storage.

For users who may already have an L-block or calibrator shielding, Capintec offers a basic system (item 5530-20207) which includes the PET UNIT DOSE TABLE, PET Sharp Shield, and calibrator mounting bracket. The calibrator stand will support any Capintec calibrator model.

The full system configuration (item 5530-20208) adds a stainless steel 511 L block and calibrator shield to the basic model.

TABLE DIMENSIONS• 36” h x 36” w x 24” d (91 x 91 x 61 cm)

• calibrator arm extends approximately 20 “ (51 cm) above table top

ITEM NUMBERS• 5530-20207 PET UNIT DOSE TABLE

Includes table, PET Sharp Shield, calibrator hanger assembly (425 lbs)• 5530-20208 PET UNIT DOSE TABLE SYSTEM

Includes table, PET Sharp Shield, calibrator hanger assembly, Stainless Steel PET L Block, Positron Shield (1,212 lbs)• 5530-20209 PET UNIT DOSE TABLE Brick Kit (930 lbs)• 5530-20210 Cosmetic Upgrade

includes side panels and door (75 lbs)

Features• Sturdy stainless steel table design with bottom shelf• PET Sharp Shield is constructed of steel and 1 inch of lead shielding, with lockable hinged cover (Capintec item 5730-2271) • Calibrator Mounting Stand supports either CRC-25 or CRC-55t model calibrators• Stainless steel L Block provides 1.4 inches lead shielding and large 11.6 “ x 9” leaded glass viewing window (Capintec item 0550-0003)• Positron Shield consists of nine interlocking 2 3/8 inch lead rings (Capintec item 7300-2903)• Optional Lead Brick kit is specifically designed to fit snugly around the PET UNIT DOSE TABLE • Optional cosmetic upgrade provides a stainless steel enclosure with door for table base• The cosmetic upgrade is available for both the basic and full system configurations.

PET Unit Dose Table

8

1. Select Insert Options:Capintec has developed three different inserts that can be placed in the cabinet shells to meet the storage and decay needs of your lab. Custom inserts are available by request.

9

Drawer Module• Stainless Steel Construction• Lever disconnect drawer slides for easy removal • 1/2” of lead shielding at front of each drawer• 4 Drawers: 6” H x 6 1/2” W x 17 1/2” D• Capacity: 80 lbs. eachPart Number .................................................5520-30396

Flood Module• Stainless Steel Construction• 3 adjustable vertical dividers allow storage of 4

flood sources or phantoms in a compact space• Fits rectangular phantoms up to 18 1/2” x 25 1/2”

(46.9 x 64.1 cm), and round phantoms up to 20” (50.8 cm) in diameter

Part Number .................................................5520-30416

Shelves• Stainless steel adjustable height shelves are

available for any space in your cabinet. • Any unoccupied space in the cabinet will be

fitted with shelving standards allowing you to install as many shelves as you wish to purchase.

• Additional Shelves may also be purchased for any of the pre-configured cabinets.

Part Numbers:1-Insert Wide ........................................... 5520-004172-Insert Wide ........................................... 5520-004183-Insert Wide ........................................... 5520-004194-Insert Wide ........................................... 5520-00420

2. Choose the Door Opening Direction:The default opening direction for the cabinet doors is right hinge, or right door opening first. If your furniture arrangement requires a left hinge, or left door opening first, please specify your preference to your sales representative.

3. Additional Options• Add a 6” diameter waste penetration with stainless steel chute, ½” lead shielded lid, and large sharps container above nearly any shelf insert or empty space. • Most cabinets can accommodate multiple penetrations if desired. • When purchasing multiple cabinets, contact sales to discuss a single continuous countertop option. • If your requirements are unique, call Capintec for a custom cabinet at 201-825-9500

22 Inch- Left Hinge 30 Inch- Left Hinge 39 Inch- Left Door Opens First

Mini L-Shield:Item #5130-2086

Stainless Steel L-Shield:Item #5550-0002

Standard L-Shield:Item #5130-2090

Illuminated Vial Shield:5/10 ml: Item #5530-2017

T-Vial Shield:Item #0665-0002

Recommended Products

C-Tec™ Syringe Shield:1cc: Item #4300-00302cc: Item #4300-10593cc: Item #4300-00315cc: Item #4300-003210cc: Item #4300-0033

PIN-TEC™ Syringe Shield:1cc: Item #4300-00342cc: Item #4300-00603cc: Item #4300-00355cc: Item #4300-0036

10cc: Item #4300-0037

511 Spring Armed Dose Drawing Station:

W/Body Shield: Item #5510-3003 No Body Shield:

Item #5510-3004

511 Dose-Drawing Syringe Shield:

5cc: Item #0665-201710cc: Item #0665-201120cc: Item #0665-2018

511 C-Tec Syringe Shield:5cc: Item #0665-2020

10cc: Item #0665-201520cc: Item #0665-2021

511 L-Block Table Top Shield:Item #0665-2014

511 Adjustable L-Block Table Top Shield:Item #5530-2077

511 Stainless Steel L-Shield:

Item #0550-0003

Universal 511 T-Vial Shield

Item #5530-2014

PIG-30 & PIG-50:PIG-30: Item #5730-2030PIG-50: Item #5730-2027

Custom Multi-Unit CountertopsContact Sales for more information

Caprac-t Wipe CounterItem #5430-3136

CRC®-PC Smart ChamberHL System - Item #5130-30255

RPh System - Item #5130-30256HL Chamber - Item #5130-20253

RPh Chamber - Item #5130-20254

Area MonitorItem #5250-0162

Ultra Tech T-MAC Elution/Moly Assay SystemItem #5130-2062

CRC®-55tw Dose CalibratorItem #5130-2216

Optility Nuclear Medicine Management Software Optility Nuclear Medicine Management Software................................................................................................................. Item #9501-0033Optility Nuclear Pharmacy Management Software.................................................................................................................Item #9501-0036Optility Commerical Production Management Softwares....................................................................................................... Item #9501-0037

● Nuclear Medicine Management● Commercial Production Management● Nuclear Pharmacy Management

7 Vreeland Road, Florham Park, NJ 07932201.825.9500 or 800.631.3826 • www.capintec.com

and Capintec are registered trademarks of Capintec, Inc.

Lead-Lined Cabinetry · Capintec quality for all of your lead-lined cabinetry and radiation...

Documents

Transcript of Lead-Lined Cabinetry · Capintec quality for all of your lead-lined cabinetry and radiation...