Lct - Pasolink Neo

16
Introduction ROI-S05752 -2- 1.1 Accessing the PASOLINK NEO 1 Connect the Computer (PC) with a USB cable between the LCT port and the USB port, Note: 1. Before connecting the LCT, you need to start to install the USB Driver, Java 2 Runtime and the Dial-up. For the details, refer to Chapter 10 to Chapter 12. 2. Do not perform the dial-up setup before USB driver installation has not been completed. 2 Click on “START” menu button, select “Connect to”, “LCT”, then, “Connect LCT” dial-up dialog is appeared, SELV ! AUX/ALM SC IN/OUT EOW PROTECT CALL MMC MAINT MEMORY IDU XIF IN XIF OUT IF IN/OUT TX RX RESET XPIC CTRL XPIC PWR ODU MD/ CBL PWR PASOLINK NEO ALM 2M IN/OUT-A 2M IN/OUT-B PULL G G G USB Cable PC for LCT USB port PASOLINK NEO IDU LCT NMS NE LCT NMS NE PASOLINK NEO ODU LCT port 100M PORT 1 PORT 2 100M LCT SETUP

Transcript of Lct - Pasolink Neo

Page 1: Lct - Pasolink Neo

Introduction ROI-S05752

-2-

1.1 Accessing the PASOLINK NEO

1 Connect the Computer (PC) with a USB cable between the LCTport and the USB port,

Note: 1. Before connecting the LCT, you need to start to installthe USB Driver, Java 2 Runtime and the Dial-up. Forthe details, refer to Chapter 10 to Chapter 12.

2. Do not perform the dial-up setup before USB driverinstallation has not been completed.

2 Click on “START” menu button, select “Connect to”, “LCT”,then, “Connect LCT” dial-up dialog is appeared,

SELV

!

AUX/ALM SC IN/OUT EOW

PROTECT

CALL MMC

MAINTMEMORY

IDU

XIF IN XIF OUT

IF IN/OUTTXRX

RESETXPIC CTRLXPIC

PWRODUMD/CBL PWR

PASOLINK NEO

ALM2M IN/OUT-A 2M IN/OUT-B

PULL

GG

G

USB Cable

PC for LCT

USB port

PASOLINK NEO IDU

LCT NMS NE

LCT NMS NE

PASOLINK NEO ODU

LCT port

100M PORT 1 PORT 2 100M

LCT SETUP

Page 2: Lct - Pasolink Neo

ROI-S05752 Introduction

-3-

3 The dialog box “Connect LCT” appears,

4 Click on “Dial” button, then the PC is accessed to the IDU,

5 Open the Internet Explorer,

6 Enter URL address: Http//172.17.254.253 of the InternetExplorer and press the “Enter” key,

Page 3: Lct - Pasolink Neo

Introduction ROI-S05752

-4-

7 Enter User ID and password in User/Password entry fields andpress the “Login” button,

Default password of Admin is defined as “12345678”

The password can be changed by Administrator privilege. The LCToperator must have the security system privilege to control of PASOLINKNEO systems. (The password change is described in Chapter 6.3Maintenance 2)

8 Following LCT Open View is displayed, (Cascaded Alarm/Status items are displayed in Main area bydefault.)

User ID Pass Word PrivilegeAdmin ******** Access to the LCT and controlUser (non password) Access to the LCT (monitor only)

PASOLINK NEO LCT Open View (Example)

Page 4: Lct - Pasolink Neo

Installation of USB ROI-S05752

-84-

10. Installation of USB

Following procedure explains when the USB Driver is installed to the PCon Windows Xp.

1. Connect the PC with a USB cable between the LCT port and theUSB port,

2. Select “Install from a list or specific location [Advanced]” andclick on “Next” button,

Page 5: Lct - Pasolink Neo

ROI-S05752 Installation of USB

-85-

3. Insert the CD-ROM of the USB driver to the PC and select“Search for the best driver in these locations” and check “Searchremoval media [floppy, CD-ROM...],” then, click on “Next”button,

4. Click “Continue Anyway” button in the Hardware Installationalert pop-up,

5. USB driver installation will be started,

Page 6: Lct - Pasolink Neo

Installation of USB ROI-S05752

-86-

6. Click “Finish” button in the “Found New Hardware Wizard” afterinstallation has been completed.

Page 7: Lct - Pasolink Neo

ROI-S05752 Dial-up Setting

-87-

11. Dial-up Setting

Following procedure explains when the Dial-up is set to the PC onWindows Xp.

1. Click on “Start”→“Setting”→“Control Panel” and on “NetworkConnections” icon to start the Dialup setting.

2. The “Network Connections” window appears. Click on “Createa new connection” in the Network Tasks category.

Page 8: Lct - Pasolink Neo

Dial-up Setting ROI-S05752

-88-

3. The “Welcome to the New Connection Wizard” windowappears. Click on “Next” button to continue.

4. Select “Connect to the network at my workplace” and click on“Next” button to continue.

Page 9: Lct - Pasolink Neo

ROI-S05752 Dial-up Setting

-89-

5. Select option “Dial-up connection” and click on “Next” button tocontinue.

6. On the “New Connection Wizard” window, enter “LCT” in the“Company Name” entry field and click on “Next” button tocontinue.

Page 10: Lct - Pasolink Neo

Dial-up Setting ROI-S05752

-90-

7. Enter phone number in the “Phone number” entry field and clickon “Next” button to continue.

8. Verify that the connection “LCT” has displayed as the connectionregistered. You can also create a shortcut on your desktop if youneed. Click on “Finish” button.

Page 11: Lct - Pasolink Neo

ROI-S05752 Dial-up Setting

-91-

9. On “Connect LCT” dia-log, click “Properties”,

10. Verify that “Modem-USB Modem Driver [COM(#)]” isdisplayed on the General tab connect using check box, and select“Show icon in notification area when connected” in the LCTProperties dia-log. Then, click on “Configure” button.

Page 12: Lct - Pasolink Neo

Dial-up Setting ROI-S05752

-92-

11. On “Modem Configuration” dia-log, check that unchecked allfive boxes, then click on “OK” button,

12. Retain the default setting on the “Options” tab, click the“Security” tab.

Page 13: Lct - Pasolink Neo

ROI-S05752 Dial-up Setting

-93-

13. Retain the default setting on the “Security” tab, click the“Networking” tab.

14. On the Networking tab, verify that PPP... is displayed in the “Typeof dial-up server I am calling” setting field, unchecked “File andPrinter... and Client for Microsoft....”, “Client for MicrosoftNetworks”.

Page 14: Lct - Pasolink Neo

Dial-up Setting ROI-S05752

-94-

15. Click “Settings” button, unchecked all the boxes in the “PPPSettings” dialog as shown below. Click “OK” to go back to theprevious window. Point “Internet Protocol (TCP/IP)” and thenclick “Properties”.

16. Verify that both “Obtain an IP address automatically” and“Obtain DNS server address automatically” are selected.

17. Click on “Advanced” button,

Page 15: Lct - Pasolink Neo

ROI-S05752 Dial-up Setting

-95-

18. In the “Advanced TCP/IP Settings” dialog, mark check box of“Use default gateway on remote network” and for the PPP linkis unchecked, then Click “OK”.

19. Retain the default setting on the “Advanced” tab and click “OK”.

Page 16: Lct - Pasolink Neo

Java Runtime Install ROI-S05752

-96-96 pages

12. Java Runtime Install

1. Install Java Runtime by double-click on the file name (highlightedbelow).