LBX Online Magazine

Item ID: 12068Contact: TomPh: 800-315-9950 x604

Item ID: 12131Contact: DarenPh: 800-315-9950 x603

DEALS OF THE MONTH

2001 MULTITEK 2020 LDSC FIREWOOD PROCESSOR

2003 PETERBILT 379 W/BOX

Item ID: 12112Contact: TomPh: 800-315-9950 x604

2005 VALMET 890.2 20-TON FORWARDER

INDUSTRIAL: MID-LEVEL: ENTRY-LEVEL:

800.553.0182WoodmizerIndustrial.com

If you want to take your operation to the next level, look to Wood-Mizer’s full line of resaws. With industrial, mid-level, and entry-level machines, these resaws help you reduce cost, increase yield, and grow profi ts.

Now is the time to revitalize your operation and get results with a Wood-Mizer ReSaw.

Rugged, high production, low maintenance

Extremely accurate, single and multi-head band resaws yield more lumber, value, and profi t

Breakdown cants with pinpoint accuracy

Thin-kerf provides higher yields and productivity

Since 1986 - The Original (800) 315-9950 or (615) 349-1890

February 2011

Traveling Arch SawHydraulically controlledNo manual cuttingOur most popular turn key system

Portable Yard SawModel 200MP-7-SS GasModel 100MP-7-SS Electric3 inch side shift, a standard feature

Automatic Strapping SystemAttach bottom crossersSide squeeze incorporatedPolyester strap Flush End Bump Rollcase

Reduce or eliminate your end trims

L-M Deck Cut Off Saw3 foot to 12 foot bar lengthsHydraulically controlled

PALLET STOCK, STUDS, I-JOISTS, STRUCTURAL COMPONENTS THE L-M SAWS, WILL TAKE YOU TO THE NEXT LEVEL!

Leading the industry in bundle cross cut systems since 1957!

The New L-M “I-CUT” Bundle cross cut system!* 60’ long frame to precision cut your I-Joists* Precision accuracy of +- 1/32”* Shorter system are available to process all your cutting needs* Tremendous labor savings, Guaranteed!

New Design!New Technology!

L-M Equipment Co. LtdPhone: 604-431-8800 Toll Free: 1-800-455-8807 Web Site: www.LMSaws.com E-Mail: [email protected]

The Verticut P4 System now offers scan and cut technology, reducing operator error by using a bar code system!

Visit our web site www.LMSaws.com to see our complete product line and videos!

P.O. Box 108 • 125 Airport Road • Grangeville, Idaho • 83530

CALL OR EMAIL

(503) [email protected]

(800) 282-5597

(208) 983-0633

YOUR EQUIPMENT DOLLARS GO FURTHER WITH US– GIVE MIKE A CALL –

JEM MACHINE, INC. www.JemMachine.com"Your Full Source of Good

Sawmill Equipment"

INVENTORY CHANGES DAILY

FALCON/KIMWOOD HOG

WEIGHT STRAIN BANDMILLS

(2) 24-UNIT CHIP BINS MORBARK STAC TRAC

$24,500

$4,900

ARMSTRONG #4Bargain Basement Price!

NICHOLSON 22” A5

6X6 PRECISION CHIP SCREEN

20 USNR DBL LENGTH INFEED

JEFFREY 40x40 HAMMER HOG

48” HORIZONTAL CHIPPER

MAKE OFFER!

For Classifieds Call Your LBX REP at 1-800-315-9950 The Original Lumberman’s Exchange n 5

FOR CLASSIFIEDS Call 800.315.9950

See pictures, prices, and Location of all equipment at

www.LBXonline.comBANDMILLS & HEADSAWS

Timber Harvester 36HTE Band Sawmill - Purchased new in Oct. of 2005 for $41,690. It has the following extra features 1. Hydraulic power rolls- for exiting large cants/timbers 2. 30 HP Electric three phase motor 3. Large roller guide assembly 4. 3rd log post 5. Dual chain drive assembly 6. Electric Set works 7. Dragback guide assembly 8. 4’ bed extension Saw is capable of sawing up to 22’ long We were sawing 5-6 MBF per day when we took it out of production. Everything is in working condition. Ran indoors forless than 8 months. Replaced with a larger saw. - Item ID-10489 - Contact-Chris WOODS - Phone- 800.315.9950 Ext- 600

BLOWERSKoger Blower - 75-hp, 54”x16” fan, 18” inlet and 18” outlet - Item ID-10849 - Daren 800-315-9950 x603Phelps blower with 20 HP motor - Phelps blower with 20 HP motor - Item ID-11742 - Daren 800-315-9950 x603

CARRIAGES & DRIVESSalem 4-headblock Carriage - Left handed - Item ID-10846 - Daren 800-315-9950 x603

CHIPPERSCM&E 36” chipper. Bottom discharge - 75 HP - Item ID-11751 - Daren 800-315-9950 x6032000 BANDIT 150XP - CUMMINS 3.9L DIESEL 12 IN. CAPACITY - Item ID-11790 - Daren 800-315-9950 x6032008 Dynamic 585 Chipper - Factory Rebuilt with upgraded components including new discharge chute, new larger bearings, new larger feed pins, new access panels to chip chamber wear plates. JD 500 HP engine with 2200 hours. Limited factory warranty on upgraded features. - Item ID-12059 - Tom 800-315-9950 x6042008 Model 570 Dynamic Chipper - 1830 Hours; New Drum at 750 hours; Cummings

** INFO LINK **AJD Forest ..............................16

Amark .....................................12

Anson ........................................7

AWMV ......................................1

B & B Mfg. .............................31

B. H. Payne .............................15

Baker .................................17, 38

Bartlett Saw Service ................32

Bay Equipment ........................39

Ben Jones Equipment ........19, 27

Buck Equipment (AIM) .........16

Canadian Mill Equipment .......21

Cardinal Wireless ....................30

Cord Master ............................20

Corley Mfg ..............................35

CRD Metalworks ....................14

Dyna Products .........................18

Five Star Lumber Co,. LLC ......9

Henry Repeating Rifles ...........34

Hutto Wood Products ..............11

James G. Murphy..................10

Jem Machine .............................4

Litco ........................................15

LM Equipment, Canada ............3

M&F Gauge ............................25

Machinery Sales Co., Inc. .........8

Menominee Saw ......................26

Midwest Sharpening Service ..28

Multitek ...................................22

Phase-A-Matic ........................29

Piper’s Saw Shop ....................24

Resource Recovery .................29

Rotochopper ............................40

Row Electric ............................38

Sawmill Exchange ..................33

Select Sawmill ..................23, 37

Suffolk Machinery ....................2

US Blades................................36

Winston Equipment .................21

Woodmizer ........................13, 17

X-S Iron ..............................9, 13

Original

The Original Lumberman’s Exchange is published monthly by Woods Publishing, P.O. Box 1916, Columbia, TN 38402. All rights reserved. All editorial/advertorial submissions are used at the discretion of the publisher and may be edited for purposes of clarity and space. Although all efforts have been made to ensure accuracy of content submitted by advertisers and writers the Lum-berman’s Exchange, its principles and associates are not held liable for errors or omissions. Reproduction in whole or part prohibited with-out writ-ten consent.

©2011 by Woods Publishing.

Your #1 Source for Forest Industry

Products!

The Lumberman’s Exchange is published monthly and is circu-lated internationally to sawmills, loggers, pallet makers, recyclers and industrial woodworking plants.

PUBLISHER Woods Publishing

ADVERTISING SALES Morris Woods (615) 349-1890 [email protected]

DESIGN DIRECTOR Heninger & Associates [email protected]

EQUIPMENT REPS Equipment Representative Daren Bodine (800) 315-9950 x603

Equipment Representative Tom Hirt (800) 315-9950 x604

MAILING ADDRESS P.O. Box 1916 Columbia, TN 38402-1916 (615) 349-1890 Phone (931) 233-0802 Fax

AD SUBMISSIONS May be sent to— [email protected]

POSTMASTER Send address changes to: Lumberman’s Exchange P.O. Box 1916 Columbia, TN 38402

** Auctions **JAMES G. MURPHY — Page 10

WWW.MURPHYAUCTION.COMPUBLIC AUCTION

STIMSON LUMBER COMPANY

49800 SW Scoggings Valley Rd., Gaston, Oregon

If y

ou

ne

ed

to

Ch

an

ge

yo

ur

Ad

dre

ss o

r

Ad

d Y

ou

r N

am

e t

o o

ur

ma

ilin

g l

ist,

th

en

p

lea

se c

om

ple

te t

his

fo

rm a

nd

ma

il t

o:

Th

e Original

Lu

mb

erm

an

’s E

xch

an

ge

❑ P

leas

e Ad

d ❑

Ple

ase

Chan

ge ❑

Ple

ase

Rem

ove

Co

mp

an

y N

am

e*

*Com

pany

nam

e an

d ad

dres

s re

quire

d to

pro

cess

you

r cha

nge.

✁

6 n February 2011 Visit us online at www.LBXonline.com!

EQUIPMENTREPRESENTATIVES

Daren Bodine Phone: 800-315-9950 Ext. 603

Tom HirtPhone: 800-315-9950 Ext. 604

CALL US TODAY FOR ALL YOUR USED

EQUIPMENT NEEDS!

DEALS OF MONTH FROM– JANUARY –

See Photos online at


1996 BARKO 275B

2002 WOODMIZER LT-40HDG-25

Powerful 8 wheeled forwarder with many options. Good condition and well maintained. Eco Tracks. Incredible flotation for working in soft ground conditions. Uses less than 4 gal/hour! Extra strong loader for handling large loads. Huge cab with Maxi control system that monitors all systems. Ready to go to work TODAY! Priced way below market. TN

Item ID: 12068Contact: Tom 800.315.9950 Ext. 604


2005 VALMET 890.2 20-Ton Forwarder

FREE EQUIPMENT LISTINGS! CALL –(800) 315-9950

325 HP Engine; New wear plates in belly pan and discharge chute. Remote Control. Runs good. - Item ID-12061 - Tom 800-315-9950 x60448” Precision Chip Pack with 90’ vibrating conveyor - Precision 48” 3 knife chip pac, 5x5 screener, with a brand new Y valve and 90’ vibrating conveyor, 100 hp electric motor on the chipper, 15 hp motor on the blower, and a 3hp motor on the shaker. This machine is in very good condition and is ready to work. - Item ID-12128 - Daren

800-315-9950 x60366” Fulghum 8 Knife Chipper - with a 250 hp motor, $7500. - Item ID-10478 - Chris 800.315.9950 x600Fulghum 54” 8 knife chipper - Horizontal feed. Vertical discharge. No motor. No pulley on machine but a bushing is present. - Item ID-11737 - Daren 800-315-9950 x603HMC 48” Chipper - HMC 48”side entry, top discharge chipper. It hs a model CM 48. Serial 23-111. It has a 75 HP 208-230/460 totally enclosed motor and is a very clean looking machine - Item ID-

11750 - Daren 800-315-9950 x603Hydraulic Feed Chipper - BANDIT 4B Cummins Power, Works Well - Item ID-11806 - Daren 800-315-9950 x603Precision 48 Chipper & Shaker - Fines blower and dual trailer shoot. 125-hp electric motor and 36’ vibrating conveyor. - Item ID-11667 - Daren 800-315-9950 x603Trelan DL18 Whole Tree Chipper - Powered by a 475-hp Cat 3406 diesel engine. Has a knuckleboom loader. Will chip up to an 18” diameter log. Is pulled with a semi tractor. Cab has sound protection and

TMT Chipping EdgerSchurman 6TA48 CombinationUkiah 6” x 48” Gang EdgerSchurman 12” Double Arbor Gang

FILING ROOM EQUIPMENTVollmer Cana E (8)Wright Mod. 1801 (3) Weinig R 934 Profile GrinderErma 71” Mag Bed GrinderNewman G-200 GrindersHanchett Knife Grinders (10)Wright W-1600 Auto TipperWright W-150 MSM Top & FaceArmstrong No. 90 EqualizerArmstrong Dual Side GrinderArmstrong Side ProNewman G-20 Rotary Armstrong No. 4 RH B.S. GrinderArmstrong No. 25 CircleHanchett DN-40 Knife GrinderArmstrong No. 4 LH B.S. GrinderArmstrong No. 4 B.S. Stretcher Roll

HOGS & PULVERIZERSJeffrey 36 x 60 ShredderJacobson Horizontal HogZeno Low-Noise GrinderWest Salem Big Brute GrinderJacobson Hammer MillW. Salem 52” Horizontal GrinderJeffrey 56 WB Hammer HogLamb HX 750 Hammer Hog Kimwood Rotary HogJeffrey 76WBH Horiz. HogGruendler 50XE Hammer Hog

MISCELLANEOUSDog Ear MachineSmith Twin Horizontal ResawGlobe Strip SawMorbark Stac Trac, NEWMereen Johnson 424DC RipsawIndustrial 3496 Finger JointerIndustrial FJS-25 Finger J. SystemHurricane 28” Chop SawFruilmac End Matcher

(866) 241-2977

OVER 13 ACRES OF GREAT BUYS ON USED EQUIPMENT!For complete equipment list, visit our website:

OR CALL AND ASK FOR DEPT. LX

Woods Planers 412M, 414M, 407M, 409M. 415M Woods Moulder 132M

Yates Planers A-20, A-62, A-66 Stetson-Ross Planers 6-12-A1, 6-12-C1, 6-10-A1, 6-14-D1

Mattison Moulders 276, 226, 228SAVE BIG ON MOTORS AND MAJOR PARTS!

WE ARE PARTING OUT

WORLD’S LARGEST INVENTORYNew & Used Sawmill & Planing Mill Equipment

9802 North Vancouver Way

Portland, Oregon 97217

WE ARE OVERSTOCKED! PRICES REDUCED!TAKE ADVANTAGE OF THIS CHANCE TO SAVE BIG!

BANDMILLS & HEADRIGSSalem 6’ Air Strain BandmillKockums 6’ QuadMaxi Mill with 6’ QuadSalem 7’ RH BandmillSalem 5’ Air Strain BandmillL&B 6’ Air Strain TwinsMcDonough 62” Twin Air Strain

CARRIAGES & DRIVESSalem Linear 36" 2-BlockTyrone 240 Hydraulic Drive Corley 40” Hydraulic 3-BlockSalem 24” 3-Block Linear CarriageUSNR 2000, 42" Stud CarriageSalem 60” 4-Block CarriageSalem 42” 4-Block Carriage

CHIPPERS & SCREENSBM&M 5’X14’ ScreenRotex 6’X16’ ScreenPrecision 58” Horizontal FeedWest Salem 58" Horizontal FeedPrecision 8X8 ScreenKockums 8X8 ScreenPrecision 66" Horizontal F.Precision 118” HFBD ChipperPrecision 96” Whole LogPrecision 48” Horizontal F.B.C. 6140 Slant DiscCM&E 36” Rechipper

DEBARKERSNicholson 35" A-2 DebarkerNicholson 22” A-5 DebarkerNicholson 44” A-2 Debarker

EDGERS & GANGSPendu Double Arbor GangSchurman Late 4” x 36” Shifting

(4) Peerless 24-Unit BinsPeerless Trailer DumperSamuels Plastic Strapper (1) 60-Unit Peerless BinL&M Log Cut-Off SawsTimesaver Sanders (6)Lumber Stackers (3)Irvington 20’ Trimmer, 1’ SawsMereen-Johnson 48” Ripsaw Sullair V-200TS Compressor5-Arm Hyd. Tilt HoistSticker Recovery SystemIrvington Planer Trimmers

PLANERS & MOULDERSWeinig Hydromat 23Weinig Powermat 2000Stetson-Ross Timber SizerWeinig Powermat 2000Mattison 226 12” MoulderMattison 228 16” MoulderDiehl 6-head TF MoulderBuss 55 Double SurfacerBuss 88 Double SurfacerWadkin 6-Head MoulderYates A-20 10-KnifeWeinig U22A, 6-headWadkin 7-Head MoulderNewman M-990H 20-KnifeNewman 382 Double SurfacerNewman M712 12-KnifeS-R 6-10-A1 10-KnifeCoastal 24” 20-knife PlanerS-R 6-14-D1 24” 16-KnifeS-R Chip BlankersWeiniig P22N 5-Head

RESAWSMcDonough 54” Twin Horizontal 36” Tri-State Tilting ResawTurner 48” Rollfeed ResawTurner 52” Rollfeed ResawSalem 6’ Horiz. Air StrainKockums 6’ Horiz. Twin Air StrainMcDonough 62” Linebar Resaw


06 John Deere 650J - Closed cab with heat and air, new undercarriage, 85% on tracks, forestry package, new paint, showing 3,114 hrs. ................... $58,500

00 John Deere 650H - 6-way hydraulic blade, forestry package, undercarriage fair, new injector pump, showing 9,975 hrs. ....

............................................. $39,500

01 Timco 425D Feller Buncher - Rebuilt motor, 80% on tracks and undercarriage, 33 inch bar saw with laterial tilt head, showing 7,100 hrs. ............................... $105,000

96 John Deere 750C - D6 Berco under-carriage, 6-way hydraulic blade, forestry package, new track pads and paint, show-ing 8,127 hrs., in excellent shape $30,000

81 John Deere 850 - 12ft 6 way hydraulic blade, forestry package, 65% on tracks and undercarriage, showing 6,267 hrs. ............................................................... $14,000

88 John Deere 550G - 6-way hydraulic blade, forestry package, 70% on tracks and undercarriage, showing 7,185 hrs. ............................................................... $21,500

98 Husky Brute XL 175 with CRT Bucksaw - Cummings 6 BT, continous turn grapple, on a Pitts pintel hook trailer .. ..................................................................... $27,500

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988

Located in Central Wisconsin• Scragg Mill: Processing Bolt • Timber and CantsCut stock, stakes, etc. • Fully operational • 1.2 M BTU Biomass Burner for • Heat and (2) Gas Fired Heating Systems 20,000 sq. ft. production area• Completely renovated in 2009•

SCRAGG MILLFOR SALE

CALL TODAY(510) 795-7204

2003 Peterbilt 379 w/Box & New Serco 8500VIN: 2XP5D89X13M591354; CAT 475 HP Diesel; Air Trac Suspension; Aluminum Wheels; 24.5 Tires; Truck in excellent condition. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup. Customer will sell separately. Ark.

Item ID: 12112Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2005 CordKing 60 Firewood ProcessorItem ID: 12027Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2006 JD 748GIII Dual Arch SkidderApprox. 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Tight center section and cradle. Unit working every day. TN

Item ID: 12117Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

heat. Rebuilt from the ground up, new wheel bearings, new face plate for chipper wheel, changed Detroit engine to Cat engine went from 300-hp to 425-hp, added new belts and heavier bearings. Only run about 6 months after rebuild. Can be used to make fuel-wood. Is ready to go, needs no work. Was manufactured in the mid 80’s. extra knives that come with it - Item ID-11292 - Daren 800-315-9950 x603

CHOP SAWSBlock saw - This well-guarded block saw has a 4x6 capacity. Blocks drop into a small elevator. It has a motor on the elevator and one on the saw. Motor controls are present. Air is hooked up to actuate the saw stroke. Feed is manual. Block length is adjustable - Item ID-11838 -

Daren 800.315.9950 x603COMPLETE SAWMILLS

2005 Timberharvester Sawmill - Purchased new in December 2005, has 1550 hours, powered by a 47-hp Lombardini diesel,

log debarker, computer setworks, can cut up to a 36”x21’ log. Stored and run

!"#

James G. Murphy Inc.Commercial & Industrial Auctioneers

18226 68th Ave NE, Kenmore, WA 980281.800.426.3008 - 425.486.1246

murphyauction.com

PUBLIC AUCTION!"#$!%&'()$*+,'-%$./&0

!"#$%&&'()&"*+,$%&&(-./%0$+*1'(23&&%*4(!1356

789(:(;-<=-!<8>(:(982?@(A),+B%+#(C:D'(E/+FG"H'(9",5I(J(3,(KH(8003%*1$+*1

D7CLL(!;(!5344%*F(M"&&+H(2G'(N"F13*'(O2

=%5I3&F3*(8:J(<+K",6+,P(!#%*4(EH0+(?/13QQ(!"#FP( (R356/$F(ST(@+"G,%4(U"*G$%&&P(R356/$F(E#%*(U"*G$%&&P(!"&+$(?",,%"4+P(?O-(U3",G( O01%$%V+,FP( J77W( ?O-( -G4+,P( ?O-( E,%$$+,P( ?O-( X:U",(<,30(Y++G(!3,1+,P(R356/$F(WC(?I%00+,P(!5,++*FP(?I%0(Y++G+,FP(U&3#+,FP(!1+1F3*(23FF(CZJW()&"*+,P(@%:E+5I(E,%$(!"#P(@%:E+5I([A:U%*(!3,1+,P(!1%56+,(!1"56+,P(Y%&%*4(\(N,%*G%*4(233$(-./%0$+*1P(23&&5"F+FP(E,"*FQ+,FP(?3*B+H3,FP(9??TF(\(-&+51,%5FP(@HG,"/&%5FP(?3$0,+FF3,FP(!I30(-./%0$+*1(\(E33&FP(23&&%*4(!1356P(9/5I(93,+(!

"#$%&'()*!+,!-,).(/!0(#$%/(1!2*!3,/(4*!5/,6(!327%8%*9

(:;<!=$9(/4!>/('%$'

?@--!3A0!@+!B--CDE0@E"F!=0A?GC0"

=O(9]=]9^9!((_((=O(2-!-2M-!


NEW HUTTO 14” PTO SHAVING MILL

$22,900

Also available from Hutto Wood Products:

(803) 317-3129www.huttoshavingmill.com

‘93 Mack w/ ‘99 Serco 8000 Loader93 Mack CL713; Mac E-7 400hp engine; 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires; Factory built double steel frame; Complete HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4’ squirt boom; This is a factory built Log Truck. MO


‘92 Ford L8000 w/1996 Series XL235E LX235E Log LoaderItem ID: 12025Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

1996 225A Timberjack SkidderItem ID: 11991Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Simonds Vertical Circle Saw LevelerExcellent Condition. Only 3984 Hours. Like new. Ball Type KRO-9702. Reduces run-out allowing saws to cut more accurately. Removes irregularities. Laser readings are displayed on digital screen. Able to process saws from 3” up to 32” diameter and plate thickness up to .150” thick. Seller will provide set up and training. Half the price of new! MAItem ID: 12084Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

inside. - Item ID-11584 - Daren 800-315-9950 x603Meadows #2 Sawmill - Meadows #2 carriage - 15’ OAL with 4 headblocks - 3 hydraulic dogs - 5 axles, hydraulic setworks with pantograph arm assembly to carry hydraulic & electric lines from carriage to husk

- clock face lumber dial - controls for setworks & dogs. Meadows #2 track frame, with idler assembly. Reckart hydraulic feed package with 40-hp electric motor. Mellott log turner. 35’ log deck with stop & load. 130KW generator. - Item ID-11086 - Daren 800-315-9950 x603Sawmill With Chipper -

Carthage carriage, helle sawmill and chipper - Item ID-11992 - Daren 800-315-9950 x603

EDGERS & GANGSMeadows 7” X 48” Combination edger - Serial # T7-1738-99. Was once used with a shifting saw. Some, but not all of the parts for this are present. There are three 23” split strob saws. There is an integrel hydraulic system on this machine. 8’ outfeed. 10’ infeed with hydraulic roller holdover and two air popup pushover chains. Remote operator station. Hydraulic press roll lifter. Main shaft is 2-15/16”. There is no main motor present. There is a mast for shifting lasers but the system is not complete. Footprint of unit: 7’ X 22’ - Item ID-11733 - Daren 800-315-9950 x603Miner Edger - 40 HP Electric motor, 4” x 32” capacity, up


Let us reprocess them $25 per 100

Now have Factory Seconds $25 per 100 sticks

Save

Your

Stubs &

Pieces!➨

Our newest color—Light Blue

1979 Timberjack 230 Forwarder1979 Timberjack 230 Forwarder (12122)Very good condition for the age. Extra long frame. Tires: 67-34-25 at 60% Detroit engine (3-53). Front Blade. Husky loader with grapple has excellent lift capacity. Currently loading hardwood logs. Great flotation. KY


www.LBXonline.com

2005 JD 650J Dozer w/Winch3200 total machine hours, 25 hrs on complete new severe duty bottom and complete service, and winch update by JD dealer. Optional lights package. Heater, air suspension seat. No tears in upholstery, no dents in grille. Very nice dozer. The winch update included an updated pump and gears. Pulls great! Below market price. OH


www.LBXonline.com

2005 Prentice 280 TMS LdrLESS THAN 1000 hrs. NOT A TYPO! Cummins engine and a 42” Hultdins grapple. Comfort cab with AC/Heat/Stereo. CTR 42IP Sawbuck included. This is as close to buying a new loader as you will get! Customer never got job the machine was intended for. Fantastic value. Ready to work! TN

Item ID: 12121Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

to (4) blades, 7’ Infeed, 8’ outfeed - Item ID-10789 - Chris 800.315.9950 x600Ogam chain drive open arm gangsaw. - 2 Main drive motors included. 10 HP and 30 HP. - Item ID-11744 - Daren 800-315-9950 x603Vertical edger for RH mill - 50 HP, 20” F saws with carbide bits, solenoid valves, splined arbor. Good looking edger. - Item ID-11781 - Daren 800-315-9950 x603

FIREWOOD PROCESSORS2001 Multitek 2020 ldsc firewood processor with 20ft conveyer - Engine and Hydrolic pump replaced 820 hrs ago. Yanmar 65hp diesel engine, 404 Pitch Chain. This machine has a total of 3000 hours total on the machine - Item ID-12131 - Daren 800-315-9950 x6032005 2040xp2 Firewood Processor + 30’ Conveyor - 80 hp John Deere Diesel, 30’ Conveyor, 2-strand roller chain, hydraulic lift, 40’ long, 20” log capacity, 8-way wedge, 3,300 hours 5th strand live

deck arm for processing blocks as short as 24” (normally a $2,000 option),

Very Well Maintained Heated Operator Cabin, Pilot Electric/Hydraulic Joysticks Safety


99 John Deere 648 GII Grapple Skidder - Single function grapple, decent tires, approx. 9,900 hrs. ............. ..................................................................... $35,000

98 John Deere 640 GII Cable Skidder - New front tires and decent rear tires, approx. 9,500 hrs. ............ $35,000

88 John Deere 640D Cable Skidder - Fair condition, 17,456 hrs. .................................................... $15,000

FEC Flat Deck Bucksaw 3-line hookup ............... $3,000

CRT 42 Flat Deck Bucksaw 3-line hookup .......... $3,000

07 John Deere 450J - Closed cab with heat and air, 6-way hydraulic blade, Full forestry package, 60% on Track and un-dercarriage, showing 3,174 hrs . $42,500

96 John Deere 550G - 6-way hydraulic blade, lever steer, 50% on tracks, 70% on undercarriage, new paint, forestry package, showing 11,279 hrs. ......................... ..$25,000

89 John Deere 550G - 6-way hydraulic blade, limb risers and screened in cab, 80% on undercarriage, new tracks and paint, showing 6,442 hrs. ...................... .....$19,000

Contact Us for Your Equipment Needs. If we don't have it, we can find it!

304.872.2988

Copyright 2011, Wood-Mizer Products, Inc.

Tough winter weather is here, but that doesn’t mean you have to put a freeze on sawing. To maintain your production and quality, use the leading profile ground blade in the industry: Wood-Mizer Blades. Ask for the 4 or 7 degree in higher horsepower, larger sawing environments, or the 9 degree in low horsepower and smaller log applications.

Lames à bande d'alliage haute qualité

Lames à bande d'alliage haute qualité

800.522.5760 | SawFaster.com

‘00 Daewoow/Denharco DM3500 Stroke Delimber

Item ID: 12026Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

2006 SALSCO 3D Shaving MillItem ID: 11977Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Seat, Clean Out Pan Option (normally $1,000 option - Item ID-11871 - Daren 800-315-9950 x6032005 Built-Rite model 50 SCP processor - Includes Auto log stop, 3 strand live deck, 4 1/2” cylinder, cab with heat & A/C, 750 hrs, 68 HP Kubota diesel - Item ID-11619 - Daren 800-315-9950 x6032006 Cord King 60 firewood proccessor - 600 hours, with 30 ft. conveyor, 120hp John Deere diesel engine, Heated operators cab, Stereo in operators cab. 58 ton ram serial#M160JDT2411177 - Item ID-12027 - Daren 800-315-9950 x6032006 Timber Wolf Firewood Processor with 26’ conveyor - 2006 Timber Wolf Firewood Processor with 26’ conveyor, 1750 Hrs, auto cycle, operator cab, - Item ID-12020 - Daren

800-315-9950 x603Best Value Portable Log Splitter - Small manufacturer in PA has made the best valued log splitter. Handles logs up to 32”. Uses 13HP Honda motor. Manual start but electronic option is available. Has Log Lift. Uses 4-way wedge adjustable to single two way. Great Value! PA - Item ID-12062 - Tom 800-315-9950 x604Simplex Chomper 14 - Chomper firewood processor, model simplex 14, will handle logs up to 14” in diameter unlimited length . Can do one cord in approx 1 1/2 hours with one man , cut split and ready to go . Uses a hydraulic shear instead of a saw so no sharpening , can split two or four ways. In Maine - Item ID-11707 - Daren 800-315-9950 x603

TIMBERWOLF Pro-HD XL Inline Firewood Processor - 80hp John Deere, Auto cycle, 8 way wedge, 16’ live deck, Cuts & splits up to 3 cords/hour, This machine was a demo unit and has very low hours. Also includes a partial factory warranty - Item ID-12013 - Daren 800-315-9950 x603

FORKLIFTS1985 Cat 8000# Forklift - V80E type d. Axle repaired and transmission fixed. - Item ID-12124 - Daren 800-315-9950 x6031987 Hyster 25,000# forklift - 8’ forks; new Perkins diesel engine; dual front wheels; 25,000#; side shift; heat in cab. Runs great. - Item ID-11672 - Daren 800-315-9950 x603


Chainsaw or Circle Blade, the Woodbine PRO “20”DOES IT ALL!

Simple Controls &Push Button Splitting

Circular Saw Saveson Maintenance

50 BHP CAT Power —STANDARD!

Introducing the NEW Woodbine PRO “20”

Designed to Work —

NOT TO BE WORKED ON!

Giving You More For Less Is The Woodbine Way.Call 888-667-8580 now to learn more!

Ordering Parts

is a breeze at

www.crdmetalworks.com

17 Hyde Hill Road, Williamsburg, MA 01096www.crdmetalworks.comEmail: [email protected]

Performance, Power & ProfitFirewood Processors

Visit our websitefor the Newest Video of The Rapido Loco Junior & The Profitable Rapido

Loco Lineup

Avaliable with .404 Harvester Chainsaw or Circular Saw Cutting System (50")

increased production.

These Features — ALL STANDARD! — Not Expensive Upgrades!

for Chainsaw or

for Circle Blade Option...

2008 Timbco/Valmet 445FXLw/Quadco 22” Saw Head; Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 3200 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value! If you need a strong machine for tough duty, this is it! TN


1996 Timbco 445EXL Tracked Feller Buncher Well maintained. History of maintenance available from owner. Final drive oil samples tested clean. Cummins Engine. Cat side frames. Quadco saw head. Good condition. Runs good. Great price! Customer ready to sell. Will consider helping with freight. West Coast machine.


www.LBXonline.com

1995 Nissan Forklift - 15,500lb Capacity, Model: DF05N70V, Diesel, Pneumatic, Side Shift, 2-Stage Mast, 177 Max Mast Height, Hour Meter Reads: 8,224, S/N: 001800 - Item ID-11892 - Daren 800-315-9950 x6031997 Hyster Model H280XL - Forklift with 8731 hours; 100” forks; Side Shift; Perkins engine. Enclosed cab; Good condion. - Item ID-12045 - Tom 800-315-9950 x6041998 Hyster Model H80XL2 - 8135 hours; Perkins engine; Sideshift; Free Travel Boom; Lowered Boom Height: 93” 46” Forks; Raised Fork Height: 194”; Runs and operates well. Good backup machine or for limited use. - Item ID-12049 - Tom 800-315-9950 x6042000 Hyster H155XL Forklift - 15,000 lb Capacity, LP Gas, Rough Terrain, Pneumatic, Tilt, Side Shift, 2-Stage Mast, 173.2 Max Height, Hour Meter Reads: 3,938, S/N: F006D05789X - Item ID-11893 - Daren 800-315-9950 x6032004 Moffett Model M5500 Truck Mounted Forklift - 1418 Hours; Kubota Diesel; 4’ Forks,

Side shift, 4 Way steer, 12’ Mast, Tires Front 31.5X13-16.5, Rear 31X15.5-15. If you deliver products on a truck, this forklift goes with you. Top brand in the industry. Priced to sell. - Item ID-12069 - Tom 800-315-9950 x604Case 586C Forklift - Forklift with good rubber, good brakes and runs good. Has side shift. 1982 year model. Case 4-cylinder. ITEM IS SOLD!!!! - Item ID-11457 - Daren 800-315-9950 x603Hyster Forklift - 2WD, LPG, Pneumatic Tires, Est 8000LB Capacity, Sideshift, ROP, Hours Shown As 3451. - Item ID-12002 - Daren 800-315-9950 x603

GENERATORS350 KVA Cummins - Genset with 9000 hours. - Item ID-11994 - Daren 800-315-9950 x60375KW Diesel Turbo Generator - 770 hrs on it. w/ a hercules Deisel Engine & right now it’s wired for 3 phase. No fuel tank underneath it, it was a platform. Very good Condition! - Item ID-10491 - Chris 800.315.9950 x600


When You Buy Your Circular Saws From B.H. Payne

You’ve Bought the best... We Guarantee It!

Make Sure To Ask For Our Free, Complete Saw CatalogWe Manufacture & Sell Inserted Tooth Headsaws, Solid Tooth

Saws, Inserted Tooth Cutoff Saws & Carbide Saws. We also

Stock & Sell Bits & Shanks, Carbide Tips, Diamond Wheels,

Knife Grinding Wheels, Saw Gumming Wheels & Knives.

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627Quality Brand

Reg. U.S. Pat Off

Circular SawsSaw Bits and Shanks

Circular KnivesCarbide Tipped Saws

Carbide Strobe ® SawsB.H. Payne & Company

Saw Manufacturers

Traditional Quality CombinedWith Todays Technology

Call 800 752-0627

Here’s What You Get With Every B.H. Payne Saw• Saws manufactured from only the Highest Quality Nickel Alloy Steel.• Each Saw Milled with State-Of-The-Art Precision CNC Milling Machine.• We Tension Your Saw to Your RPM Speed BEFORE Leaving Our Factory.• Your Satisfaction - Completely Guaranteed.

B.H. Payne & Company, Inc.P.O. Box 90608East Point, GA 30364404 761-8711Fax 404 761-5398

“Since 1890”

E-mail: [email protected] Web Site: www.paynesaws.com

1992 Bell Super TItem ID: 11898Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

LATE 70’S 230 Timberjack ForwarderItem ID: 11993Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

KNIFE GRINDERSHanchett Band Sharpener - Sharpener with stretcher and shaver - Item ID-11601 - Daren 800-315-9950 x603Hanchett Circular saw grinder - Hanchett Circular saw grinder This circular saw grinder appears to be capable of grinding up to a 36” diameter saw. Plate info: Size 724. Serial # 8109 - Item ID-11746 - Daren 800-315-9950 x603Schneider Pattern Knife Grinder - Schneider Pattern Knife Grinder - Item ID-11743 - Daren 800-315-9950 x603

LOG BOOM CRANES1984 BARKO 80BC - Log loader, includes the International truck, sn#15298 - Item ID-11428 - Daren 800-315-9950 x603

LOG TURNERSLog deck headframe with Mellott chain turner. - Deck is intended for a RH mill. Chain spacing as viewed from carriage Right to Left: 0”-60”-118”. Turner is at 45”. Stop & Loader and deck drive shaft are 2-7/16”. Gearmotor is 3 HP (3 phase) with #100 Roller chain drive. Unit size: Length-132” Width-77” height-64”. Sprockets are 1” wide at tooth area. 12 tooth. 2-5/8” spacing. Would work for H-78 chain. - Item ID-11778 - Daren 800-315-9950 x603Mellot log turner & Hydraulic system - The Mellot Log Turnner Comes With With Joystick Control Valve And Hydraulic System. - Item ID-11752 - Daren 800.315.9950 x603

LOGGING EQUIPMENT1969 Fiat Allis articulating loader - 1969 Fiat Allis articulating loader with Log Forks Needs fuel tank cleaned out but works otherwise - Item ID-11437 - Daren 800.315.9950 x6031974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers - 1974 BARKO 160 Knuckleboom Loader Log Loaders/Stackers, Detroit engine, mounted on IH truck, with Barko 42 grapple - Item ID-11979 - Daren 800-315-

9950 x6031978 CAT 518 Grapple Skidder - 23.1x26 Tires, tires 40%, Gearmatic Winch & Esco Grapple, Center Pins are tight - Item ID-11800 - Daren 800-315-9950 x6031978 TIMBERJACK 225 - DETROIT POWER-MANUAL SHIFT, Tires are 50%, Due to age of machine ares are unknown - Item ID-12031 - Daren 800-315-9950 x6031978 Timberjack 240A Cable Skidder - Strong simple unit. In use today pulling hardwood logs. 28” tires at 40%. Detroit engine. MO. Engine recently rebuilt and valves freshly sealed. - Item ID-12123 - Tom 800-315-9950 x6041979 JD 440C Cable Skidder - Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows


AJD Forest ProductsPremium Kiln Dried Hardwoods

Northern Red Oak is Our SpecialtyLake States Largest Producer of Industrial Lumber

P.O. Box 629 • Grayling, MI 49738 • (989) 348-5412 • FAX: (989) 348-2500

Email: [email protected] • Web: www.ajdforestproducts.com

2008 Valmet 603 3-Wheeled Feller Buncherwith Hot Saw; Only 3800 hours; 18” bunching saw head; Cummins 4-cyl engine with 130HP; Enclosed cab with heat/air/stereo; 28” tires at 70%; Very good condition. Great thinning machine with zero turn radius. Economical to operate, engine burns 4.5 gal/hour. Has cut up to 14 loads/day. Inexpensive to use and to transport. Call for more details. LA


2009 Tigercat E620C Grapple SkidderLess than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive; Strongest center section in market. You won’t find Tigercat skidders like this on the market! Don’t wait for long factory delivery…this unit can be pulling wood today! AR


www.LBXonline.com

3400. Color - Yellow. VIN #: 440C334150T - Item ID-12091 - Tom 800-315-9950 x6041979 Timberjack 230 Forwarder - Very good condition for the age. Extra long frame. Tires: 67-34-25 at 60% Detroit engine (3-53). Front Blade. Husky loader with grapple has excellent lift capacity. Currently loading hardwood logs. Great flotation - Item ID-12122 - Tom 800-315-9950 x6041980 DEERE 540B Grapple skidder - Swinging Grapple,

winch, front tires are 70% and rears are 85% or better, new batteries and a new seat. - Item ID-12010 - Daren 800-315-9950 x6031981 (est) Clark 666 Cable Skidder - Unknown hours; Many recent improvements - New 6BT8.3 Cummins with 1500 hours; New Service Brake; New Parking Brake; 23.1 x 26 tires at 50%; Runs good; Very strong power train. - Item ID-12054 - Tom 800-315-9950 x6041982 540B Grapple Skidder -

New engine and Transmission 2000 hrs on both, bottom center pin is new, top has a little wear, tires are at 40% power shift Transmission. Pictures are coming soon - Item ID-11569 - Daren 800-315-9950 x6031984 DEERE 540B - Cable Skidder, New 23x126 tires on rear. 8000 hrs - Item ID-11875 - Daren 800-315-9950 x6031984 DEERE 540B - Cable Skidder, 20,000# winch capacity, 7 ft blade, articulating, 4 cyl JD turbo

dsl @ 90 hp, powershift 6 fwd/3 rev, 7 ft blade, 18,700# machine, 20,900# capacity front tires 50% reares 30% - Item ID-11566 - Daren 800-315-9950 x6031984 John Deere 640D Cable Skidder - NEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NC - Item


Last chance for 2010 prices on portable sawmills.

Prices only good until February 28, 2011. Call or go online for pricing.

Copyright 2011, Wood-Mizer Products, Inc.

800.553.0182 woodmizer.com

‘99 Tigercat 860 Stroke DelimberItem ID: 11886Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

Sawmill with ChipperItem ID: 11992Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

ID-12092 - Tom 800-315-9950 x6041987 FORD L9000 - TWO BUNK OR 4 SETS OF BOSTERS, 366,000 mile, vin#A55219 tri axle, Cat 3406 diesel engine, 8LL transmission and 370 rears, prentice 120c - Item ID-11844 - Daren 800-315-9950 x6031988 DEERE 648D - Front tire are 70% rear are 50%, Machine runs good - Item ID-11432 - Daren 800-315-9950 x603

1988 FORD L9000 - 425 hp Caterpillar engine, 702,000 miles, 10 Spd transmission, air ride suspension, with a Prentice knuckleboom loader - Item ID-11846 - Daren 800-315-9950 x6031989 CAT D5H TSK - 1989 CAT D5H TSK, WITH WINCH & FAIRLEED-GOOD PAINT-GOOD SHAPE, 6-Way - Item ID-12029 - Daren 800-315-9950 x6031990 FORD A64 Wheel Loader - 1990 FORD A64 Wheel Loader


For Firewood Production - Take Your Pick

*Production rate may vary based upon log size, quality, power source used and operator skill.

The DYNA SC-14 OR SC-16

Packed and ready to go!

12 Years of Building Quality Machines!

toll free: 1.888.820.3962local: 231.734.4433fax: 231.734.36816228 60th Avenue, Evart, MI 49631

Both Give you High Production in an

Affordable and Profitable Processor The SC-14 (pictured) Offers

DYNA Portable Sawmills

Shell Forest Products, Harrodsburg, KY Marty Shell 859.325.3694

Great Lakes Firewood, Twin Lake, MI Dennis Blankenship 231.206.4073

Sensenig Repair, Mio, MI Dennis Sensenig 989.848.8346

Warrick Hallet Carpentry, Glencoe, MN Warrick Hallet 320.864.4340

PDG Sales, Medina, NY Philip Graber 585.798.2969 SC-16 Demo Model Available

North Country Hydraulics, Potsdam, NY Ben Deschaine 315.842.0388

Riehl’s Sawmill Sales, Lykens, PA Amos Riehl 717.365.3852

Lickity Split Firewood Equip., Stetsonville, WI Clayton Szydel 715.550.1077

Timberline Landscape, Davis, WV Bill Mollard 304.940.0749

Call the Dealer Nearest You!


EXPERTLY BUILT AND SOLD by a company you can depend on!

Fulghum 66” ChipperBaker AX 12” Resaw

250 HP WEG SoftstarterDiehl Straight Line RipsawJocar Linebar ResawNewman S382 Dbl Surface Planer

Mereen Johnson 424 Slat Bed Gang RipsawUSNR Edger Infeed

Skylead YarderItem ID: 11527Contact: DarenPh: 800-315-9950 x603www.LBXonline.com

1993 Timbco 425Item ID: 11582Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2004 CAT 950GII Front-End Loader950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped with GP bucket and adding new 23” tires before sale. Good working machine. OR


‘08 Terex TXL-400-2 Front End Loader5 yard capacity; Factory warranty; 747 hours; 26.5 tires; Weight 49,900 lbs; Discounted for quick sale. VT


www.LBXonline.com

with forks, - Item ID-12032 - Daren 800-315-9950 x6031991 Cat 518 grapple skidder - 1991 Cat 518 grapple skidder All belly pans and sheet metal were removed so the

machine could be steam cleaned. All the cylinders have been packed. The radiator is rebuilt with new tanks. New starter has been installed. A couple of new guages were installed. New hinge pins and steering pins installed. All

filters and fluids have been changed. Many hoses have been replaced. Winch has been rebuilt. Brakes work good. New exhaust muffler and pipe installed. Tires have about 35% tread. Seat is in good condition. New paint and decals. - Item ID-11832 - Daren 800-315-9950 x6031991 Hydro Ax 221 - 1991 Hydro Ax 221 hour meter broken good tread good

Highest Production

Lowest Maintenance

GUARANTEED!!!

Trailer: Tandem axle, 8’6” wide, 22’-30’ long, 11’8” high, 5-7 tons, Electric brakes.

Saw: Superior Carbide Slasher - Cut wood instead of sharpen chains 36” to 60” diameter, 2 ga Carbide Slasher.

Engine: 50 to170 HP or PTO Drive with user’s tractor.

Hydraulics: Commercial Shearing

Splitter: 35 - 72 tons, 3-5 second cycle time; 2, 4, 6, 8, 10, 12, 14 & 21 way pkg wedge. Capacity - 4” to 27” Log diameter 0” to 48” Block Length Lifetime warranty on the entire splitter chamber.

Infeed Conveyor: 16” - 30” long Hydraulic powered.

Clean out Hopper: Get rid of bark and wood slivers before being conveyed away.

2040 ROGERS ROAD,PERTH ,ONTAR IO K7H 1P9CANADA

www.cord-master.comEmail : [email protected]

NEWGRAPPLESYSTEMNow Available!

Today!888-219-9663


Authorized Dealer for:

In Stock and Available Now!New, Used and Refurbished Equipment

58” Chipper (Rebuilt by Precision with a Precision warranty!)

ALSO AVAILABLE:

Barn Sweeps

Vibrating Conveyors

Debarkers

Chip Units

Soft Start Starters

Electric Motors (New & Used)

FEATURED ITEMS:

Jeffrey 75hp Hog; Like New!

58” Morbark Chipper

6x6 Precision Screen with Cyclone

Precision 58” 6-Knife Chip Pack

Looking for Quality Sawmill Equipment—Look No More!

Winston EquipmentMark Johnson (205) 522-0519 or Dan Hogan (205) 300-8447

DOUCET CLAMP CARRIER

(800) 319-8871

Exceptional Prices Excellent Service

Meadows #2 SawmillItem ID: 11086Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1984 John Deere 640D Cable SkidderNEW TRANSMISSION; John Deere 6cyl Diesel Engine; 30.5 x 32 tires at 70%. Great flotation. Winch works well; Runs good. VIN #: 640DC513656 NCItem ID: 12092Contact: Tom Ph: 800-315-9950 x604www.LBXonline.com

running condition includes bush hog attachment - Item ID-11769 - Daren 800-315-9950 x6031991 Hydro Ax 221 - John Deere, 4-cylinder Koehring 18” high speed disc saw 28L x 26 tires enclosed cab with heat and air - Item ID-11770 - Daren 800-315-9950 x6031992 Ford L8000 with a 1996 Series XL235E Log Loader - 1992 Ford L8000, Serial # 1FDYW82A8NVA07578, TK Body Style, 307,000 miles, 225 hp, 7 speed Transmission, a/c, 410 gear ratio, hendrickson suspension 1996 Series XL235E Log Loader, new complete engine, 116 hp, 42” Log Grapple, - Item ID-12025 - Daren 800-315-9950 x6031992 GMC Truck with 1996 HM38 Production Drill - 29’ Drill Depth - Less than 200 hours since replacement of Bar & Barrell; 3” Kelly Bar; Funk 12,000 transmission - Less than 50 hours since rebuilt; Ford CSG 300 gasoline Engine; Rebuilt V-70 valve; Less than 100 hrs; Rebuilt

Hydraulic Pump Less than 100 hrs; Reinforced Table; Mechanical drive & Hydraulic bar; 18” Ring Gear Torques to 42,000 ft. lbs; Swing Base; Mounted on Tandem Axle Carrier; Auger Capacity up to 72” intermittent or 54” Constant; Carrier-1992 GMC/Volvo Diesel Tandem Axle Truck - less than 200,000 mi. - Item ID-12056 - Tom 800-315-9950 x6041992 Prentice 180D Log Loader - w/Cummins engine

mounted on Pitts Trailer. Good condition with 7,700 hours - Item ID-11434 - Daren 800-315-9950 x6031993 FREIGHTLINER FLD12064ST - Detroit 60

series engine, 425 hp, 18spd transmission, 4.10 gear ratio, Barko 80 LOADER, Reman


Multitek Firewood ProcessorsIncrease Your Productivity and Profitability

Made in the U.S.A.

1979 JD 440C Cable Skidder Rebuilt Deere 4 cyl. engine; Manual Transmission, Body- good, open cab w/ ROPS, dozer blade, diff locks, winch with cable; Tires - 16.9 x 30 4@30%; Hour meter shows 3400. Color - Yellow. VIN #: 440C334150T

Item ID: 12091Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

1997 Bell Ultra C Feller BuncherKoehring 18” Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition. Great for thinning and very stingy on fuel. Plus this machine is easy to transport behind a one ton pickup. Smart way to cut when on a tight budget. NC


www.LBXonline.com

TRANS Dec. 07, Both rear end recently rebuilt, full synthetic fluids in trans & rear ends. Full double frame. Full Locking

Rears. Well Maintained Truck Bed legnth 19’6”, air ride suspension Front tires 60%, new set of drives - Item ID-11641 - Daren 800-315-9950 x6031993 Timbco 425 - With dangle head; new under-carriage and runs great. Has all books. - Item ID-11582 - Daren 800-315-9950 x6031993 Timberjack 380 C Skidder - 23.1x26 rubber, Esco grapple, winch, enclosed cab, Cummins engine, rebuilt motor and transmission. - Item ID-11534 - Daren 800-315-9950 x6031994 Cat 518C Skidder - The engine was rebuilt 3 months ago. An extra Lufkin winch is included. Has 3400 size tires on it. - Item ID-11856 - Daren 800-315-9950 x6031994 John Deere 640E Cable Skidder - Screened in Cab, 23.1 x 26 tires Ice chains rear and Bear Paws on the front. Exellent condition. Hrs are 11,000 - Item ID-11653 - Daren 800-315-9950 x603

1995 Hydro-Ax 411E - 1995 Hydro-Ax 411E, 7236 hours, 18” Koehring Sawhead, 28L-26 Tires, 4WD, inclosed cab w/heat - Item ID-11673 - Daren 800-315-9950 x6031995 International 4700 Grapple Truck - 14’ Brush body, 4-1/2 ton boom, DT 466 engine, spring suspension, 239902 on the odometer. - Item ID-11883 - Daren 800-315-9950 x6031995 International 9300 Log Truck - Tri-axle, with 235,000 original miles. Has 2007 Hood 7000 loader. Drive tires are 98% stear tires are 50% and tag tires are 50%; Dayton hubs. 46,000 rears. - Item ID-11502 - Daren 800-315-9950 x6031995 Tigercat Model 720 FB w/5000 Bunching Head - 5638 Hours; Cummins 190HP; Tires: 28LX26; 2@80%; 2@30%; Paint - Fair; Body - Good; Glass - Fair; Cutting Disc Good. Runs good. Excellent value. - Item ID-12051 - Tom 800-315-9950 x6041996 511EX Hydro-Ax With


1997 CAT 515 Skidder Item ID: 11857Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1997 CAT D5H TSKIIItem ID: 12012Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Bunching Saw Head - Hours est at 6800. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. - Item ID-12072 - Tom 800-315-9950 x6041996 BARKO 275B - 6BTA Cummins Engine, 52” Rotobec Grapple - Item ID-12076 - Daren 800-315-9950 x6031996 Freightliner 120c - knuckleboom mounted behind cab, Cat 10 speed. Great for picking up logs and loading. - Item ID-11435 - Daren 800-315-9950 x6031996 GMC Topkick - Includes 3126 Cat Automatic transmission. Has an Ampiroll 90L Hook Lift installed that has 12,500 pound capacity. Truck runs well. - Item ID-11101 - Daren 800-315-9950 x6031996 Timbco 445B Leveling Feller Buncher - Quadco 22’ Hot Saw: Hour meter shows 6700 hours, but owner says meter was changed. Est.

hours are 13,000. Runs good. Detailed maintenance history available. Motivated Seller. - Item ID-12075 - Tom 800-315-9950 x6041996 Timbco 445-B w/ 22” Quadco Hot Saw - 1996 Timbco 445-B w/ 22” Quadco Hot Saw 40 degree tilt, Self- leveling, 4000 hours on old meter, on new meter 6530 hours, Ser:# FT4C 811 012496, Reman pumps were installed with the new hour meter. May 2003, Rebuilt Cummins 6CTA installed at 1000 hrs. June 2004, 2 idlers installed at 1800 hrs. Dec 2004, New Berco rails , pads and sprockets installed at 3400 hrs. Apr. 2006, New updated swing bearing and house tilt pins; bushing installed at 3950 hrs. Dec. 2006, Pump drive and implement pump rebuilt at 4200 hrs. Apr. 2007, New Cat track motor installed at 4550 hrs. Sept. 2007, 3500 hr. used swing box from Fraley installed at 4800 hrs. Jan 2008, All new track rollers on right side installed at 4950 hrs. Jan 2008, New saw head tilt flange

installed at 5150 hrs. Sept 2008, Used boom from Fraley installed at 5230 hrs. Sept 2008, Stick cylinder resealed at 5280 hrs. Oct 2008, Main valve resealed at 5370 hrs. Oct 2008, Injector pump rebuilt at 5890 hrs. Jan 2009, Boom cylinder resealed at 6020 hrs. Feb 2009 Shaft seals in pumps, tool cylinder resealed, and new AC pump installed at 6100 hrs. Aug 2009, New saw teeth installed at 6430 hrs. Nov 2009 - Item ID-12037 - Daren 800-315-9950 x603

1997 Bell Ultra C Feller Buncher - Koehring 18” Hot Saw; 5073 hours; 28L tires with chains; Cummins 4 cylinder with 110HP; Joystick controls. Good condition. Great for thinning and very stingy on fuel. Plus this machine is easy to transport behind a one ton pickup. Smart way to cut when on a tight budget. - Item ID-12118 - Tom 800-315-9950 x6041997 Cat 515 Skidder - Cab has A/C. Has 28L26 tires. Engine rebuilt 9 months ago. - Item


PIPER’SSaw Shop

800 • 845 •6075

Promotional Pricing OfferSimonds Red Streak Hard Back

1-1/4” x .042 x 3/4” or 7/8”Length 13’2”

$14.27 eachTell us you saw it here!

Limited

Time

Only

Adjustable Loading RampItem ID: 12110Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2001 CAT D5H TSK II Grapple & WinchItem ID: 12083Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

ID-11857 - Daren 800-315-9950 x6031997 CATERPILLAR D5H TSK II - 6,330 hours, 6/Way Dozer, Canopy w/Sweeps, Winch, Esco Single Function Grapple :U/C 60% approx., Pads 22in SBG R/P/B 50% SEGS 50% BAL, 50% Track Guards : Front/Rear/ Side Screens, Grapples w/Ext, shipping dimensions weight 43,000lbs HEIGHT 10ft 5in LENGTH 17ft 10in WIDTH 8ft 9in - Item ID-12012 - Daren 800-315-9950 x6031997 Husky XL235 on Mack Truck - Fair condition but runs good. Good back up loader.

Standard lever controls. Clean for its age. Priced to sell. - Item ID-12066 - Tom 800-315-9950 x6041997 MACK CL713 with 18ft Petty built Pup trailer - 1997 Mack CL713 EZ427 replacement engine with 220k in Dec. 09, NEW! 18sp tran replaced by Mack Dec.08, 120C Prentice Loader, 22.5FT Rack, with Petty Built Pup Trailer (18.3ft).... Drive tires are at 40% and ster tires are rated at 50-60% - Item ID-12130 - Daren 800-315-9950 x6031998 Bell Ultra THP - Totally rebuilt, 7-1-08. engine,trans,drive motors, reconditioned a/c. New prime X 23x26 tires, new 3/4 rud multi-ring chains. New firestone rear tire. 30” dangle saw. Working daily. 5300 total hours. - Item ID-11679 - Daren 800-315-9950 x6031998 PRENTICE 310E - Machine is ready to work, overall condition “GOOD” - Item ID-12033 - Daren 800-315-9950 x6031998 PRENTICE 620 WITH DENNHARCO DHT550 COMPUTERIZED MEASURING-TOPSAW-BUTT SAW-FORESTRY CAB and 8,540 hours - Item ID-11888 - Daren 800-315-9950 x6031998 Volvo truck w/160 Barco Log Loader - Volvo truck w/Volvo diesel engine, 5 speed transmission - Air brakes 160 Barco Log Loader 4 cylinder Detroit diesel engine Hydraulic system is good Runs great - Item ID-11436 - Daren 800-315-9950 x6031999 BELL TF120B Feller Bunchers - One owner machine, it is on D5 cat tracks, Hours not known; meter not working. - Item ID-11480 - Daren 800-315-9950 x6032000 Daewoo with Denharco DM3500 stroke delimber - 2000 Daewoo with Denharco DM3500 stroke delimber, this is a bank repo an is open to offers - Item ID-12026 - Daren 800-315-9950 x6032001 CAT D5H TSK II - 8,102 hours, Cab with A/C, Six Way Blade, Fixed Esco 120” Grapple w/Winch, U/C 85%,


REAL TUFF BALER&BAGGERTM

Phone: (325) 641-8300 Fax: (325) 643-3243Manufactured by M & F Gauge & Specialty Co., Inc.

PO Box 693 • Brownwood, Texas 76804www.realtuffbaler.com

$13,907

BUILT TO LAST

Save $$$ on Bedding—Bale it Yourself!

Electric or Diesel, Manual or Automatic

Real Tuff Baler Dimensions & Specifications- (2) Hydraulic Cylinders are controlled by

using a two spool valve

- 30 H.P. motor (220/440 volt 3 phase) starter not included

- 25 G.P.M. Pump

- 50 Gallon reservoir capacity

- Only the highest quality industrial com-ponents are used

2007 John Deere 700J LT DozerOnly 1155 Hours! John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6“ blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. NCItem ID: 12094Contact: Tom 800.315.9950 Ext. 604

www.LBXonline.com

GREAT ROAD - BUILDER -

2004 Tigercat 630C Grapple Skidder12,295 hours but well maintained. Center section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NCItem ID: 12093Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2002 John Deere 230C LC Excavator w/ThumbCurrently working; Only 5200 Hrs; Cab w/ heat and A/C - Works, Glass good; minor dents all around but works good; New chains and sprockets about 300 hrs. ago. TNItem ID: 12097Contact: Tom800.315.9950 Ext. 604www.LBXonline.com

2001 Husky 235 Loader Mounted on Mack Truck9600 hours; Lever Controls; Runs good; Good backup loader. Priced to move! TX


www.LBXonline.com

rebuilt transmission - Item ID-12083 - Daren 800-315-9950 x6032002 John Deere 230C LC Excavator with thumb - Currently working; Only 5200 HRS; CAB W/ HEAT AND AC - WORKS GLASS GOOD; MINOR DENTS ALL AROUND BUT WORKS GOOD; NEW CHAINS AND SPROCKETS ABOUT 300 HRS AGO - Item ID-12097 - Tom 800-315-9950 x6042003 Cat 525B Grapple Skidder - S/N 3KZ00897, 10,496 Hours, EROPS, ESCO Grapple w/ winch, 30.5 X 32 Tires 60%. Machine is in Tennessee - Item ID-11986 - Daren 800-315-9950 x6032003 Morgan 2 Saw Trimsaw - This machine was bought new and never was really used, less than 50 hours if that, machine has never been painted it wwas just not used. - Item ID-11904 - Daren 800-315-9950 x6032004 72” CSI R72 Circle Saw - Hydraulic. 20’ deck. Sold without the blade. New blade is additional $3500. Was over $40,000 new, 2 years ago. machine needs a new blade, 1500 hrs, it was used to cut logs - Item ID-12125 - Daren 800-315-9950 x6032004 Barko 495MH Mounted on Trailer - 3280 hours, Hydraulics for a self

propelled carrier; Bar Slasher Hydraulics; Cummins engine; Rotobec 5052 grapple. Very good condition. Poor paint. Dry and tight. - Item ID-12065 - Tom 800-315-9950 x6042004 Cat 287B - 2004 year model, on tracks. 1390 hours. Cab with A/C and hand controls. Tooth bucket. This is a one owner machine. - Item ID-11652 - Daren 800-315-9950 x6032004 Cat 950GII Front End Loader - 950G currently has 18,111 hours on meter and is equipped with Hydraulic Coupler, Automatic Greasing System, Fire Suppression, and 20.5 x 25 Tires. S/N 950GCAXR00269. Equipped with GP bucket and having new 23” tires before sale. - Item ID-12100 - Tom 800-315-9950 x6042004 DEERE 648G III - 1420 hrs, 50% on tires, Pins are tight - Item ID-12030 - Daren 800-315-9950 x6032004 JD 648GIII Single Arch Grapple Skidder - Well maintained; 8200 hours - engine rebuilt at 7100 hours; Price reduced to allow for new tires for buyer; Pulls strong. Motivated Seller - Item ID-

12067 - Tom 800-315-9950 x6042004 Tigercat 630C Grapple Skidder - 12,295 hours but well maintained. Center


JOCKEY GRINDER OWNERS!!!

“EZ-SLIDE” TOOTH STOP & TOOTH REST

This Patented, Spring Loaded Design• Allows for EZ sliding of the grinding wheel to the tooth.

• Eliminates the sticky divots of the old style wear plates.

• Saves you time and money with better control of the sharpener and

more consistent sharpening of your saw teeth.

The high quality stainless steel wear plate contacts the tooth as the aluminum frame and grinder move to sharpen the tooth.

Call 1-800-582-0470 TODAY

Our sawyers say they will not go back to

the old style parts.

Joe NowakLumberjack HardwoodsMenominee, Michigan

This is one of the best innovations in our industry to

come along in years. Where was this 30 years ago?

Kevin Mueller Mueller Brothers TimberOld Monroe, Missouri

www.menomineesaw.com

48” Precision Chip Packw/90’ Vibrating ConveyorItem ID: 12128Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2005 Bronco Model 2006 Pallet Nailing SystemItem ID: 12108Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

section tight. Cummins C8.3 - 240 horse power; Dual Arch Tigercat Bunching Grapple; Steering tight; Some slack in front cradle; 34” Tires at 40% VIN #: 6302024 NC - Item ID-12093 - Tom 800-315-9950 x6042004 Valmet 425 Ex-10 Harvester - 4700 hours: Timbco self leveling carrier with Cat D6 side frames; Long reach harvesting boom of 35’; Valmet 360 harvesting head is fast and efficient; Well maintained with service history. - Item ID-12074 - Tom 800-315-9950 x6042005 CAT 525B Grapple Skidder - 8100 hours, EROPS

w/ AC Single Arch w/ Grapple & Winch tires are 25% - Item ID-12028 - Daren 800-315-9950 x6032005 JD 650J Dozer w/Winch - 3200 total machine hours, 25 hrs on complete new severe duty bottom and complete service, and winch update by JD dealer. Optional lights package. Heater, air suspension seat. No tears in upholstery, no dents in grille. Very nice dozer. The winch update included an updated pump and gears. Pulls great! - Item ID-12120 - Tom 800-315-9950 x6042005 John Deere 550J - This


EXPERTLY BUILT AND SOLD by a company you can depend on!

Our New Shaving MillsBig Production Affordable Price!

800-241-8983FAX 706-324-0047

Our New Shaving Mills Give You Big Production at an Affordable Price!

Financing Available

Expertly built and sold by a company you can depend on.

1990 Ford A64 Wheel LoaderItem ID: 12032Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1987 CAT D4H TSKw/Winch and Forestry Package

Item ID: 12026Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

has only 1981 hours, has a cab with A/C, 24” pads, rear cab screens and front limb risers. The pins and bushings have been turned and the sprockets have been replaced. - Item ID-11661 - Daren 800-315-9950 x6032005 Prentice 280 TMS Loader - Less than 1000 hrs. Cummins engine and a 42” Hultdins grapple. Comfort cab with AC/Heat/Stereo. CTR 42IP Sawbuck included. This as close to buying a new loader as you will get! Customer never got job the machine was intended for. Fantastic value. Ready to work! TN - Item ID-12121 - Tom 800-315-9950 x6042005 Prentice Model 410E w/TMS Package - 2730 Hours; 52” Grapple; CTR Model 450 Pull Through Delimber; Prentice TMS System with III Series Trailer; Very good condition. Well Maintained. KY - Item ID-12079 - Tom 800-315-9950 x6042005 Valmet 890.2 20 ton Forwarder - 10,450 hours.

Rear Bogeys recently sealed. 8 wheeled. Good condition and well maintained. Eco Tracks. Best price available for a 20 ton Forwarder in this condition. Ready to go to work TODAY! Motivated Seller! - Item ID-12068 - Tom 800-315-9950 x6042006 Barko 495 Crawler Loader - 48” Hydraulic Cab Riser; 32’ reach; Totally gone through with new pins bushings and engine service. 9463 hours. Undercarriage is 90% with 28” pads. Has delimber and bar saw slasher hydraulics. - Item ID-12102 - Tom 800-315-9950 x6042006 Barko 495 Crawler Loader - 5008 hours; Unit has 48” hydraulic cab riser that totally folds forward for legal height transport; Undercarriage is 90% with wide 36” pads. Equipped with both delimber and bar saw hydraulic package. 32’ reach and Rotobec 48” grapple. Excellent condition for yard

machine or working at set. Priced to sell. - Item ID-12103 - Tom 800-315-9950 x6042006 Cat 420E Loader Backhoe - Comfort cab with AC/Stereo; Extend-a-hoe; 400 hours; Aux hydraulics; 4 WHEEL DRIVE; 24” back hoe bucket - Item ID-12071 - Tom 800-315-9950 x6042006 Cat D6R Dozer with Semi-U Blade - 2821 Hours;

24” pads. 12’4” Blade, Power tilt blade, Runs and operates good. Under carriage good, sprockets, rails, and pads good; Cab & Air; Cat C-9 Diesel Engine. - Item ID-12058 - Tom 800-315-9950 x6042006 JD 700J Dozer with Winch - Very clean dozer with winch and low hours of 1869. Enclosed cab with comfort


2004 Deere 648G IIIItem ID: 12030Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

1989 CAT D5H TSKItem ID: 12029Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

2006 JD 700J XLT Dozer1075 Hours. Excellent condition. Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. One owner machine. Ready to sell.Item ID: 12073Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

package. Runs strong and is priced to sell. Excellent value and worth a look. NC - Item ID-12101 - Tom 800-315-9950 x6042006 JD 700J XLT Dozer - 1075 Hours. Excellent condition.

Very well maintained. Comfort cab with air and stereo. Work light package. Undercarriage at 90%. - Item ID-12073 - Tom 800-315-9950 x6042006 JD 748GIII Dual Arch Skidder - Approx 8400 hours; Very well maintained; 30.5 tires at 40%; Sweda axles; Winch. Unit working everyday. - Item ID-12117 - Tom 800-315-9950 x6042006 NEW Fuchs 460 Log Loader - 44’ Reach. 212 Demo Hours. Rotobec 5012 Grapple. Hydraulic raising cab for excellent operator visibility. Priced well below dealer cost. Motivated Seller. Great storage yard machine. - Item ID-12064 - Tom 800-315-9950 x6042006 PRENTICE 384 mounted on a Mack Truck - 4600 hours, has been on a yard since 2006 - Item ID-12008 - Daren 800-315-9950 x6032007 John Deere 700J LT Dozer - 1,155 Hours; John Deere 6068 6cyl Diesel; 6 way blade, 10’ 6” blade, EROPS, Corner bits and cutting edge good; Very clean and very good condition; No winch. VIN #: T0700JX148380; Excellent value. - Item ID-12094 - Tom 800-315-9950 x6042007 Tigercat M760 Mulcher - Cat C13 TAAC Tier III engine. 415 HP. Equipped with FAE mulching Head model 500/U225C. Excellent condition. Rebuilt engine, replaced FAE rotor, replaced FAE head, new starter and batteries installed in 2009. INCLUDES: Spare Components - Radiator, fan controller computer, 12 blade fan, hydraulic, engine oil, and air filters, FAE teeth-approx. 30; FAE bolts-approx. 50; nordlock washers for FAE, FAE tool-holders, FAE drive belts, owner’s manuals, service manual, parts manual, C13 engine manual - Item ID-12132 - Tom 800-315-9950 x6042008 JD 2554 Harvester with Waratah 624 Processing Head - 4700 hours; Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Well maintained. Below market

price. - Item ID-12087 - Tom 800-315-9950 x6042008 Terex TXL-400-2 Front End Loader - 5 yard capacity; Factory warranty; 747 hours; 26.5 tires; Weight 49,900 lbs; Discounted for quick sale. VT - Item ID-12114 - Tom 800-315-9950 x6042008 Timbco/Valmet 445FXL with Quadco 22” Saw Head - Latest Model of Tracked Feller Buncher from Valmet with Heavier Komatsu undercarriage. 3200 hours. Excellent condition. 28” double grousers. Leveling cab. 360 degree rotator on Quadco saw head gives great flexibility in production. Customer selling due to job changes. Great value! - Item ID-12119 - Tom 800-315-9950 x6042008 Valmet 603 Three Wheeled Feller Buncher - 3700 hours; 18” Bunching Saw Head; 28” tires at 70%; Rear tire 20%; Cummins 4-cyl, 130 HP uses 4.5 gal/hr.; Very good condition. Excellent thinning machine - Item ID-12053 - Tom 800-315-9950 x6042008 Valmet 860.3 Forwarder - 16 ton capacity. Low hours - 2850. Excellent condition and well maintained. HD grapple; Engine guard; 8 wheeled; Blade; Tracks do not come with machine. Customer job changed. Must sell for what is owed. Great value! Uses 3.8 gal/hour. - Item ID-12133 - Tom 800-315-9950 x6042009 Tigercat E620C Grapple Skidder - Less than 1900 hours; 44” high flotation tires; Excellent condition; Seller shut down job; Save thousands over new 2011 unit. Hydrostatic drive; Strongest center section in market. You won’t find Tigercat skidders like this on the market! - Item ID-12106 - Tom 800-315-9950 x604225A Timberjack Skidder - In ready to work condition. 1986 year model with a 353 Detroit engine. - Item ID-11991 - Daren 800-315-9950 x603230 Timberjack Forwarder - Late 70’s model forwarder. Is powered by a Detroit 353, has a Husky Brute loader, tire size


Beaver Model 18

Coming Soon4 New Models

2008 Vermeer BP8000 Bale ProcessorBP 8000 bale processor. Machine has big tires and remote for cab. It is not a final cut machine. Excellent condition. MSItem ID: 12099Contact: Tom800.315.9950 Ext. 604

www.LBXonline.com

‘08 JD 2554 Harvester w/Waratah 624 Processing Head4700 hours; Waratah 624 Harvesting Head. Great for both in woods harvesting or deck processing. Get more value from every stem! Motivated Seller! Well maintained. Below market price. LA


is 24-5-32. Engine completely rebuilt 3000 hours ago. - Item ID-11993 - Daren 800-315-9950 x603510 International Wheel Loader - Please call for information. Photos coming soon. - Item ID-11990 - Daren 800-315-9950 x603“518 Cat Grapple Skidder - Late 80’s 4WD Drive; Cat winch, maintained machine.; 30.5 x 32 Tires, 95% rubber. 130-hp, all pins are good. - Item ID-11078 - Chris 800.315.9950 x60098’ 620 Prentice Track Cutter - Quadco saw / 80% under carriage / rebuilt finals / John Deere engine 6,000 hrs. on it. - Item ID-10479 - Chris 800.315.9950 x600Barko 160A with Chop Saw - 1992 year model. Chop Saw 2000 or 2001 included. - Item ID-11117 - Daren 800-315-9950 x603“Bell Super T - 1992 year model, serial number BCH3953, 23.1x26 tires. Needs a head - Item ID-11898 - Daren 800-315-9950 x603Case 580 Fork Lift - Mid 70’s Fork Lift 580 Case, High Lift, Good Condition - Item ID-11493 - Daren 800-315-9950 x603Cat 518 Grapple Skidder - 1980 year model with grapple, winch and canopy. Hours

unknown; no meter. - Item ID-11103 - Daren 800-315-9950 x603Cat 518C Grapple Skidder - 1995 year model. With grapple & winch. 12000 hours - 200 hours since engine and transmission were rebuilt. Really good condition. Tires are 28 X 46. Open cab. - Item ID-11293 - Daren 800-315-9950 x603Cat 545 Grapple Skidder - 2003 year model. Please call for information. - Item ID-10996 - Daren 800-315-9950 x603Cat 545 Grapple Skidder - 2004 year model. Call for more information. - Item ID-10997 - Daren 800-315-9950 x603CAT D4H TSK WITH WINCH AND FORESTRY PKG - CAT D4H TSK WITH WINCH AND FORESTRY PKG. Is a year 1987. Only 7500 original hours. - Item ID-12024 - Daren 800.315.9950 x603Caterpillar D6R - Caterpillar D6R with winch, hours 8211, s/n 5LN00696 - Item ID-11906 - Daren 800-315-9950 x603DEERE 440 - S/N #090370, with a winch - Item ID-11431 - Daren 800-315-9950 x603Gyro Trac GT25 - Machine has

1278 hours. - Item ID-11801 - Daren 800-315-9950 x603Hood 28000 Loader - Year model 2004; 72” hot saw; only 340 hours. - Item ID-11418 - Daren 800-315-9950 x603John Deere 240 - Skid Loader 52HP 1785 Hours. Excellent Condition. 12x16.5 Tires 75% More Details Soon. THANKS FOR LOOKING. - Item ID-11799 - Daren 800.315.9950 x603John Deere 290 - With Elite processing head, 2 roller. 4

cylinder John Deere engine. Very good undercarriage. - Item ID-10934 - Daren 800-315-9950 x603John Deere 640E Skidder - 1993 year model, 6 cylinder, powershift transmission, no leaks - Item ID-11989 - Daren 800-315-9950 x603John Deere 643D - 1995 year model. 22” kohring sawhead. tires are 70%, Motor is new replaced last month, 8000 hours on machine. heated


CARDINAL WIRELESS5775 Park Plaza Ct.

Indianapolis, IN 46220317 577 9944 www.cardinal-wireless.com

TWO-WAY RADIOSUp to fifteen miles of loud, clear range

and NO airtime charges.

FREE shipping for minimum 3 units

GPS TRACKINGfor Truck Fleets

ASSET TRACKINGfor Construction Equipment, Generators,

Trailers and Rental Equipment

GATEGUARD®

Remote Gate Control and Radio Communication

Call today for more information:

8 0 0 - 3 3 2 - 3 2 6 8w w w . c a r d i n a l - w i r e l e s s . c o m

HEADSETSfor Hearing Protection

NEW - Pitts LB52-24D Tri-Axle Detach Trailer2008 Model. No miles. Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel wells. Priced below market. NC


www.LBXonline.com

NEW Pitts LT42 8UL 8” Center Drop Log TrailerWidth: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC Note: Photo shows exact trailer but painted red. Unit available is painted black.


www.LBXonline.com

and A/C cab. - Item ID-11414 - Daren 800-315-9950 x603John Deere 648D Skidder - Has new hydraulic pumps, has winch, runs great, 8332 hours. - Item ID-11711 - Daren 800-315-9950 x603Koehring Hot Saw - 22” head.† Very good condition. The bottom pin is 2” around and 12” long. The top pin is 2-1/2” around and 4-3/8” long. - Item ID-11469 - Daren 800-315-9950 x603

Metavic Log Loader trailer - Log loader trailer is 2 years old, has 12’ boom with a 30” grapple. 12’ bunk, will hold 20” logs/polewood, has 6500lb winch, 110’ 5/16” cable. - Item ID-11362 - Daren 800-315-9950 x603NEW Pitts LB52-24D Tri-Axle Detach Trailer - 2008 Model. No miles. Black paint. Has Pony motor, Fold out outriggers, 5 position neck, D rings, and covered wheel

wells. Priced to sell! NC - Item ID-12089 - Tom 800-315-9950 x604NEW Pitts LT42-8UL 8” Center Drop Log Trailer - Width: 8’6”; Color: Black; Additional Info: 4-Bolsters - Log Trailer Length: 42’ Model #: LT40-8UL - Log Trailer Weight: 8,900 FOB: NC - Item ID-12090 - Tom 800-315-9950 x604Serco 8500 Log Loader - Model 8500, Not mounted - Item ID-12007 - Daren 800-315-9950

x603Skylead Yarder - $40,000 in new parts. Brand new motor 300 hours ago; new turbo, injector pump, new lines, new radios, new batteries, new haulback brake, new drive chain, strawline brake, etc. In good condition. 1999 year model. - Item ID-11527 - Daren


Sell Your WOOD – $300/cord or More!Double or triple your profits by shrink wrapping wastewood - fore-wood with WOOD-PAKer! Attractive various size packages can be obtained with our high production, easily operated and affordable machines. Eight machines available. The ideal equipment for produc-ing square bundles-palletizable for ease in storage and transporting. Inquire for free details. Video and Package samples at nominal fee.

B & B Manufacturing

SHRINK WRAP FIREWOOD/WASTEWOOD

1998 Prentice 310EItem ID: 12033Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

‘78 Timberjack 225Item ID: 12031Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Morbark 58 ChipperItem ID: 12082Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

800-315-9950 x603Tigercat 860 Stroke Delimber - 1999 year model bought new in 2001. Excellent condition and ready to work. Delimber is a Denharco DM3500. Machine is a one owner, one operator machine. - Item ID-11886 - Daren 800-315-9950 x603Timbco 425 Feller Buncher - 1996 year model with Quadco hot saw. 40” tilt, new pump and drive motor. Great shape. - Item ID-11031 - Daren 800-315-9950 x603Timbco 425 with Bar Saw Head - 2002 year model powered by a 260-hp Cummins engine. Has 33” Timbco Bar saw head. Has 3300 hours, in good condition and very work ready. - Item ID-11340 - Daren 800-315-9950 x603Timberjack 380 - Dual function grapple with winch. 30.5.32 rubber. 453 Detroit diesel. - Item ID-11072 - Daren 800-315-9950 x603Timberjack 380 Grapple Skidder - Esco grapple, 453 Detroit Engine. Engine and transmission are strong, pins are tight. 1980 Year model. - Item ID-10950 - Daren 800-315-9950 x603Trim All “All in One” Trim Saw Attachment - Order through Lumberman’s Exchange at great prices. This attachment can replace the bucket on a skid steer, loader/backhoe, or farm loader and turn it into a trimming saw at a fraction of the cost of large trimming machines. Reach from 23’ to 75’ depending on model. 3 models to choose from. Optional rotating saw and swing out arm for maximum flexibility and greatest performance. Clear power lines, dead limbs, or widen right of ways with 24” saw blade with carbide tips. - Item ID-12105 - Tom 800-315-9950 x604

MISCELLANEOUSDip Tank System - Installed in 1996. Tank is 10’ wide X 20’ long X 94” deep. Infeed deck is 21’ long X 13’6” wide. Infeed rollcase is 20’ long X 66” wide. Infeed drive is 10-hp. Outfeed rollcase is 45’ long

X 66” wide. 2 storage decks, one is 20’L X 11’3”W the other is 20’L X 10’3”W. Hydraulic unit is 50-hp, 3 phase. New cost $230,000. (Building in photos is not included.) - Item ID-10850 - Daren 800-315-9950 x603Hough 65 Motor for Salvage - w/ a good cummins CN6 motor & converter. - Item ID-10480 - Contact-Chris WOODS - Phone- 800.315.9950 Ext- 600

Milling machine - Cincinnati #2 vertical milling machine. - Item ID-11797 - Daren 800.315.9950 x603

MOULDERSFukami 6 head moulder - Fukami 6 head moulder NTX-150 - Item ID-11753 - Daren 800-315-9950 x603

PALLET MACHINERY2005 Bronco Model 2006 Pallet Nailing System - Pallet nailing system with roll-out. Was used

to build 48”x40”. New in 2005. One owner. - Item ID-12108 - Daren 800-315-9950 x603Bob Hanna Double Head Pallet Notcher. Item ID-11815 - Daren 800-315-9950 x603Hawk Bandsaw Dismantler - Powered by a 3-phase, 15-hp electric motor. Has a 64” table. Can be a one or two-man machine. Large tires for extended blade life. Capacity is 50-80 pallets per hour.


1996 511EX Hydro-Axw/Bunching Saw HeadGood working unit for moderate applications. Only 200 hours on factory reconditioned hydraulic motors and pumps. Comfort cab with working air. 28L tires with chains at 50%. Saw head has side pocket for cutting larger trees. Very well maintained machine. Approx. 6800 hours. Owner ready to sell. WS


2004 Valmet 425 EX-10 Harvester4700 hours; Valmet 360 Proc. Head. Fast and efficient measuring. In woods or at the deck. Leveling machine for working steep grades. 35’ reach makes this a great thinning machine. Easily does 5th row thinning. Low fuel consumptions too! See more photos at www.lbxonline.com

Item ID: 12074Contact: Tom 800.315.9950 Ext. 604www.LBXonline.com

2007 TIGERCAT

M760 MULCHER

Cat C13 TAAC Tier III engine. 415 HP. Equipped with FAE mulching Head model 500/U225C. Excellent condition. Rebuilt engine, replaced FAE rotor, replaced FAE head, new starter and batteries installed in 2009. INCLUDES over $15,000 of Spare Components such as Radiator and fan controller computer. Plus owner’s manuals, service manual, parts manual, C13 engine manual. CO


www.LBXonline.com

2007 Monarch Dynasty Motor HomeUnbelievable package! Less than 30,000 miles! Luxury at its’ best. Came to seller from Bank Repo. Allison Automatic Transmission; Cummins Diesel. Surround sound entertainment with 3 TV’s! This is a top of the line motor home for a price you won’t believe. Call us for more amazing details of the features. If you want to cruise the highways....here is the way to go! NC


Manufactured by Saw Service & Supply Co. - Item ID-11065 - Daren 800-315-9950 x603Mark I Pallet Dismantler - One-man, 62” table Mark I - Item ID-11811 - Daren 800-315-9950

x603Pallet Chief lll nailer auto nailer. - Item ID-11812 - Daren 800-315-9950 x603Smart Bandsaw Dismantler - 64” table. Two-man operation. Less than 100 hours on a

complete rebuild. Powered by a 15-hp 3-phase motor. Push button table height adjustment. 400-700 pallets per 8 hour shift. Manufactured by Smart Products. - Item ID-11066 - Daren 800-315-9950 x603

Third Man Inc. Pallet Nailing Unit - Third Man Pallet Nailing Unit, Model TMN-075, S/N PJ0075, Handles Up To 48 x48, Does 3 Or 4 Stringer Pallets. - Item ID-11890 - Daren 800-315-9950 x603Third Man Nailer with Stacker - Third Man Nailer with Stacker - Item ID-11809 - Daren 800-315-9950 x603Williams 200 H.P. Hammermill Grinder - This 200 H.P. hammermill was recently removed from a sawmill where it was being used to grind wood waste to boiler fuel for several large industrial customers. This grinder has a very large capacity and would work well in the grinding of whole pallets because it has a top opening size of 27” X 52”. This grinder is powered by a 200 H.P. electric motor that operates at 1200 RPM and uses 460 voltage for its power. The electric motor is direct coupled to the grinder through a shear coupler to prevent damage from being done to the grinder.


SAWMILL EXCHANGENorth America's Largest Source

of Used Portable Sawmills.

Over 800 Ads:

and Much More!!

The Place to Sell Your Equipment

800-459-2148

2004 Morbark N-Viro Mulch 2000Item ID: 12109Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

1993 Morbark 1200 Tub GrinderItem ID: 12126Contact: Daren800.315.9950 Ext. 603

www.LBXonline.com

CAT D4H TSK w/ Winch & Forestry Pkg.

Item ID: 12024Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

This machine is equipped with a bar type screen that determines the size material the machine is going to produce. Of course this screen can be changed to achieve many different size materials being produced from the same machine. This machine comes with a size # 6 motor starter and 600 amp breaker which are enclosed in a large free standing electrical cabinet. This is a very nice clean unit and would work ideally for many grinding applications. - Item ID-12011 - Daren 800.315.9950 x603

PLANERSComplete Planer Mill - Yates American A20, 8 knife, belt driven with top and bottom profile; 54” McDonough Resaw; heaby motorized conveyor chain; XL ripper; Goff cleat machine; 2 double end trimmers; DeWalt radial arm saw. Includes all motors and dust collection systems. - Item ID-10994 - Daren 800-315-9950 x603Newman 4-sided planer - This 6-3/4” x 16” capacity 4 sided planer has been updated with separate motors for the feed, top head, bottom head, and both of the side heads. It has sat idle for some time but is restorable. I overhauled the side heads and they have been stored inside. This machine differs from most 500 models in that it has 9” feed rolls rather than 8”. - Item ID-11729 - Daren 800-315-9950 x603Newman S682 two sided planer. 6”x30” capacity. 6 knife heads - 30” Width, 6” max. & 1/4” min. thickness cap., shortest stock 46” (not butted) 20” butted; manual thickness adjustment. Equipped with: 40 HP - 3,600 RPM Direct drive motor to top head, 20 HP - 3,600 RPM direct drive motor to bottom head, both heads with NEWMAN 6-knife straight cutterheads, 7” max. cutting circle. - Sectional top chipbreaker with 3” wide hardened steel sections, 1-1/2” max. travel. 10 HP Mechanical feed drive, variable feed speed

from 50 - 150 FPM, feed system with (6) 8” dia. feed rolls, (2) top infeed rolls sectional with 2” wide segments allowing 5/16” independent yield and 1-1/2” yield of the entire roll, max. cut top 1-1/2” and 1/4” bottom. - Item ID-11747 - Daren 800-315-9950 x603Yates American planer - 18” model J18, 2-speeds, 3-phase, new knives, +/-.005 on the cut, ready to work! - Item ID-11860 - Daren 800-315-9950 x603

PORTABLE SAWMILLTimber Harvester Sawmill - 5600hrs runs and works great, cuts 30”wide and 21’long 30hp Deutz motor fully hydraulic mill - Item ID-11895 - Daren 800-315-9950 x603

RECYCLING EQUIPMENT1990 Morbark 16 Chip Harvestor new Cat engine whole tree chipper with 16” diameter capcity, cab and grapple loader, grapple loader is in good condition, 1000 hours on new Cat engine, only 3500 original hours, new clutch, new belt, new bearings, needs some paint, some dents in the cage, but overall mechanically sound whole tree chipper. - Item ID-11863 - Daren 800-315-9950 x6031991 Haybuster IG-8 tub grinder - 1100 hrs, 2” screens, john deere diesel engine, swing hammers have been replaced, discharge belt has been recently replaced, only used to regrind bark - Item ID-11864 - Daren 800-315-9950

x6031993 Morbark 1200 Tub Grinder - rebuilt by Morbark in 1999. Equipped with grapple, 650-hp Cat Diesel engine, rebuilt clutch, rebuilt hammermill, oversized hammermill and wider-longer conveyor. 9500 hrs approx. - Item ID-12126 - Daren 800-315-

9950 x6031994 Duratech HD8 tub grinder - Has only 204 hours


“Henry rifles will only be made in America or they

won’t be made at all.” Anthony Imperato

President of Henry Repeating Arms

For a FREE color catalogvisit www.henryrifles.com

or call Toll Free (866) 200-2354

It’s not a prideful boast. It’s a solemn oath from all of us at Henry Repeating Arms. Every Henry rifle is and always will be made in America by American workers. Decent, hard working folks like you who take great pride in their work. We won’t follow the path of other manufacturers who have their products made overseas and slap their name on them. When you read the rollmark on the barrel of a Henry, it’s going to read Made in the USA. We start with only the finest ingredients - gun barrel quality steel from Ohio, genuine American walnut from Missouri and Iowa, steel castings from Wisconsin and brass components from Pennsylvania. We manufacture a rifle that you will be proud to own – with the smoothest action, flawless reliability, and pinpoint accuracy. Made in America with the same integrity as the Henry rifle President Lincoln owned. We are a family owned business and we stand behind every rifle that leaves our plant. You will find our customer service second to none, and we’ll do whatever it takes to guarantee your complete satisfaction. We invite you to become part of the Henry family. Please order our free catalog, which includes information about our rifles, a list of dealers in your area and a free Henry decal.

Henry .22 Lever Frontier Model with Octagonal Barrel. An affordable, beautiful rifle with superior tack-driving accuracy. Crafted by American workers for American shooting enthusiasts.

Henry Golden Boy .22 LR /.22 Mag / .17HMR

Henry Big Boy .44 Magnum / 45C / .357 Mag

Henry Acu-Bolt .22 LR / .22 Mag / .17 HMR

Henry U.S. Survival .22 LR

®


Carriage Linear & Set ShaftLewis Controls “Electronics for sawmills by sawmillers”

The Most Complete Line of Sawmill Machinery Since 1905!

Call (423) 698-0284

1985 CAT 8000# ForkliftItem ID: 12124Contact: Daren 800.315.9950 Ext. 603www.LBXonline.com

Trelan DL18 Whole Tree ChipperItem ID: 11292Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

on it! John Deere turbo diesel with 131 horsepower, new under belt, new roller bearing, new hydraulic pump, and new exhaust. swinging hammers on mill, 2 sets of screens included (3” and 1 7/8”), 10’ discharge conveyor, good tires, 25/16” ball hitch on trailer. original owner’s manual included, ready to go to work on your yard waste or pallets! Duratech CO. also owens Hay buster. The Haybuster nane tells you that it is more for farming and the Duratech name tells you that it is for heavy duty work such as gring heavy material, but they bouth fall under the DURATECH name as the company is DURTACH INC. - Item ID-11861 - Daren 800-315-9950 x6031994 Haybuster HD-10 Tub Grinder - Powered by a John Deere Diesel Engine, Hydraulic Driven Tub and Conveyors, 10’ tub size, Hour Meter Reads: 920 Hrs, S/N: 18-1-49-0312 - Item ID-11693 - Daren 800-315-9950 x6031995 MORBARK 1250 - Fixed Hammers, Knuckle Boom, Cab, and 36” Tarantula Heavy Duty Grapple, Tripple Axle, Magnetized Pulley Conveyor, Cat 3412DITTA, 750HP Engine. 1st Hour Meter Replace:6425. 2nd Hour Meter Replaced: 634. - Item ID-11704 - Daren 800-315-9950 x6031995 WHO P12-56 Tub Grinder - Cat 500 hp, hyd raising tub, updated/new hammer mill, new tub floor, clean unit ready for work. - Item ID-11818 - Daren 800-315-9950 x6031996 Morbark 2400 Chipper - Twin Disc Clutch,New Paint and Decals,Panels in Great shape,Pintle Hitch,New Knives,12X16.5 Tires - Item ID-11879 - Daren 800-315-9950 x6031999 CBI Model 4800 Grinder - 1680 Hours: Twin Disc Clutch; Flex reversible fan, Remote control, Weight 93,000 lbs., Tires 445/65R22.5, New teeth, Updated hammers, Full engine service just completed; Cat 3412 engine w/12 cylinders; Ready to go to work; Very

good condition - Item ID-12047 - Tom 800-315-9950 x6042000 Morbark 30/36 - Morbark 3036 New $30,000 upgrade done by factory including HD drum, new belts, bearings Hyd. pump. babbitt knives cat 3306 turbo engine with 335 HP new brakes, new paint and decals no leaks or drips never any trouble with engine. This 2001 is in great shape and ready to work!! - Item ID-11804 - Daren 800-315-9950 x6032000 Morbark 3036 Whole Tree chipper - Loader, Joystick controls with A/C and heat. New drum and bearings. serial# is 4661100-3036 - Item ID-11363 - Daren 800-315-9950 x6032002 Brush Bandit 250 - 12” capacity disc-style chipper with auto-feed Cat 115 horsepower engine, in 2006 engine got new assembly and doghouse, 137+/- hours on new engine, 1260+/- hours on frame, upper feed wheel hydraulic lift, work ready! - Item ID-11835 - Daren 800-315-9950 x6032003 Morbark 7600 - 3200 hours on a Cummins 12-cylinder engine, 1000 horsepower, ran daily, magnetic end pulley, wireless remote, 5X5, 8X8 screens, Twin Disc clutch, tight clutch, new mill rods, balanced mill, new lights, 85%-95% tires, very good value for a horizontal grinder this size! - Item ID-11830 - Daren 800-315-9950 x6032003 PETERBILT 379 with Box and new Serco 8500 - VIN: 2XP5D89X13M591354 ; CAT 475 HP Diesel; Air Trac Suspension; Aluminum Wheels; 24.5 Tires; Truck in excellent condition. Double Frame. Has new box and new Serco 8500 loader. Perfect for storm or FEMA cleanup. Customer will sell separately. AR - Item ID-12112 - Tom 800-315-9950 x6042003 ROTOCHOPPER CP118 - Portable wood chip processor with coloring unit. This machine runs good but has an electric problem it keeps flipping the circuit

breaker for the conveyor and auger Sold at this price As Is needing work to electric has extra screens, 2” screen. Will produce 35 - 40 yards per hour - Item ID-11973 - Daren 800-315-9950 x6032004 BANDIT 3680 Beast Horizontal Grinder, approx. 4500 hrs., working Daily - Item ID-11819 - Daren 800-315-9950 x6032004 Bandit Beast - Powered by a V12 800-hp Cat diesel

engine. 2300 hours. Photos coming soon. - Item ID-11233 - Daren 800-315-9950 x6032004 Morbark N-viro Mulch 2000 - 1994 year model. Powered by a 21-hp Kuboto Diesel. Has a 5 yard infeed hopper, mixing screw and colorant pump. 35’ auger, new motor on color pump and can process around 30 yards per hour. - Item ID-12109 - Daren


Why?Why?We use only the highest quality nickel alloy steel •

NEW• state of the art CNC milling centers for perfect pocket geometry

100 + years of combined hammering and •

manufacturing experience Proudly made in the • USAStock to 10 days on standard sizes•

Nations largest distributor/manufacturer of saws •

and knives

www.usblades.net

CALL 800-862-4544Locations in

Hampden, ME Meridian, MS Florence, SC West Monroe, LA

800-315-9950 x6032004 Vermeer HG6000 Demolition Grinder - SN:1VRY4531341000129, Cat C16 Diesel 630 HP, Hour Meter Reads: 1,791. Located in Ohio - Item ID-12116 - Daren 800-315-9950 x6032006 Bandit 2680 Horizontal Grinder - Only 765 hours; Cummins 400HP engine; 4’ wide fixed discharge belt, Wireless remote, Water dust supression system, 315/80R22.5 tires. This machine is very clean in excellent condition. - Item ID-12048 - Tom 800-315-9950 x604“2006 Morbark 18 chipper - 180hp Cat, 160 hours, tandem axle. 10,000lbs, curbside jack, 65”x38” feed chute, 36” drum with controlable airflow, 48 gallon lockable fuel tank, manuals and paperwork included. - Item ID-11355 - Daren 800-315-9950 x6032008 Vermeer BP8000 Bale Processor - BP 8000 bale processor. Machine has big tires and remote for cab. It is not a final cut machine. Excellent condition. MS - Item ID-12099 - Tom 800-315-9950 x604Dura Tech HD-8 Tub Grinder - Haybuster tub grinder, 8’ opening on tub, 16” x 10’ discharge conveyor, trailer mounted, 215/75R17.5 tires, John Deere diesel engine 110-hp, 705 hours. New clutch, new hitch and new oil temperature guage. Maintenance done, changed out fuel and oil filters; changed the oil. - Item ID-11803 - Daren 800-315-9950 x6031999 Duratech HD12, 12’ tub grinder - great running tub grinder with brand new mill, new clutch pak, new tub ring, only 100 hours on rebuilt Cat engine 460 horsepower, swing hammers, hydraulic tilt tub, 5 sets of screens included 1”, 2”, 3”, 4”, and composting screen, magnetic head pulley, 2 extra sets of hammers, includes regular tires and foam-filled tires for yard use - Item ID-11848 - Daren 800-315-9950 x603Duratech IG-10 Tub Grinder - Powered by a 300-hp diesel engine. Has 3000 hours. Magnet on the discharge. New hammermill and new belts. 2” screens. - Item ID-11320 - Daren 800-315-9950 x6031992 Haines Bagger, single bagger, stationary, with large hopper, sealer, take-away belt, 8’ X 18” Ruff Top elevated conveyor, originally set up for bagging sand and gravel, owner used only a short while, and then it sat. always stored indoors, single phase electric see a similar model by Haines..click HERE Haines manufacturer still provides parts for this older unit. - Item ID-11826 - Daren 800-315-9950 x603Haybuster H1000 PTO Tub Grinder - Tub has been re-inforced. Belts are almost new. Mid 80’s model. Has either 2 or 3” screen. Is 10’ wide at top of flair. TRANSPORT DIMENSIONS Width 10 ft. 3 in. (3.12 m) Length 21 ft. 4 in. (6.50 m) Height 10 ft. 2 in. (3.10 m) - Item ID-11554 - Daren 800-315-9950 x603Haybuster IG-8 Tub Grinder - Powered by a 110-hp John Deere diesel engine. Has only 1034 hours. Includes a 1” and 1-1/2” screen. 8’ discharge conveyor. - Item ID-11426 - Daren 800-315-9950 x603Morbark 1200 Tub Grinder - Powered by a Cat 3412 650-hp diesel motor. Includes a Morlift 350 grapple; lots of new parts; freshly painted; air compressor; heat and A/C in the cab; magnetic head pulley. - Item ID-11660 - Daren 800-315-9950 x603Morbark 290 Wood Chipper - everything done and ready for spring, great machine for landscaper or a second back up machine for a small tree company; chipper has


1999 Prentice 620 HarvesterPonsse processing head; New undercarriage; Engine replaced 1000 hours ago. Very strong machine. Good value. Quebec, Canada


www.LBXonline.com

2008 Valmet 860.3 Forwarder16 ton capacity. Low hours - 2850. Excellent condition and well maintained. HD grapple; Engine guard; 8 wheeled; Blade; Tracks do not come with machine. Customer job changed. Must sell for what is owed. Great value! Uses 3.8 gal/hour. MS


www.LBXonline.com

always started and chipped; extra sharpened blades; it has a cummins diesel engine; 88 horse power; has new tires and brakes - Item ID-11897 - Daren 800-315-9950 x603MORBARK 58 3-knife Chipper - This machine is ready to work - Item ID-12082 - Daren 800-315-9950 x603Morbark Tree Shear - 20” Morbark SB52 Superbuncher tree shear. - Item ID-11468 - Daren 800-315-9950 x603Vermeer 400L Tub Grinder - This grinder has a cab, grapple and magnetic head pulley. It is powered by a 400-hp Cat diesel engine. Unit is on a triple axle trailer and has only 2300 hours. Also a folding discharge conveyor. - Item ID-10539 - Chris 800.315.9950 x600

RESAWS42” Mcdonough Band Resaw - Verticle special “V” shape infeed allows cutting 4 by 4 on a diagnal. - Item ID-10477 - Chris 800.315.9950 x600Morgan band resaw - has automatic return belt, 220/440, 3-phase, early 90’s model - Item ID-11866 - Daren 800-315-9950 x603

ROLLING STOCK1974 Peterbuilt Water Truck - Model 351; Good condition. Runs and pumps water well. - Item ID-12060 - Tom 800-315-9950 x6041983 Mack Cruiseliner w/tail mount 1986 Hood 7000 Series loader - Mack E6-350, 800k+

miles, 9 speed Fuller trans, 20k lb.front axle w/ floats, 44k lb. rears. New in last 2 years - windshield, paint, front rims, tires, batteries, reman transmission, conversion to S-cam brake assemblies on front axle, rear brake shoes, air compressor, air dryer, rear suspension w/ trunion, buckets, bushings, truss rods and frame rail, front grille, cab jack pump, recent clutch adjustment, fluids changed and more. Rubber at 75 percent, some minor leaks. Parts truck available. Hood 7000 loader w/ 22-foot boom, butt grapple and 11k# lift capacity @ 10 feet. New in last 2 years - main boom cylinder, left grapple cylinder, rod ends in right grapple and jib boom cylinders, all other cylinders repacked and/or rebuilt as needed, external filter assembly, valve sections and spools, most swivels and hard/soft lines. Some minor leaks. will take offers! - Item ID-11796 - Daren 800-315-9950 x603

SAW GRINDERS & STRETCHERSArmstrong Band grinder. - Nice #4 L.H. Serial RB 6642. Air back feed. 3 Stands. Updates. Cams: 50E 4U W, 50E 4U F - Item ID-11777 - Daren 800-315-9950 x603

SAWMILL1995 Simonds Automatic Bandsaw Leveler - Excellent Condition. Will improve cutting accuracy, filing room

safety, saw life, leveling quality and filing room productivity. The paybacks from automatic leveling - less deviation, kerf reductions, and simplified saw maintenance. Great value and a smart investment! - Item ID-12085 - Tom 800-315-9950 x6041995 Simonds Vertical Circle Saw Leveler - Excellent Condition. Low Hours-3984 Hours. Runs and looks like new. Ball Type KRO-9702. Serial # 05-9702-1131 Reduce run out with this machine allowing your saws to cut more accurately. Remove all lumps and bumps. Laser readings of the saws flatness are displayed on digital

screen. Able to process saws up to 32” diameter and plate thickness up to .150” thick. - Item ID-12084 - Tom 800-315-9950 x6042005 Cooks Acu-track AC 36 Heavy Duty, Machine has 1300 hrs on it, 51 HP Perkins Diesel. Runs the band saw which has a inch and half wide band on it, 12HP Kochler Gas Motor. Powers the hydrolic controls, it comes with a De-barker/De-Mudder to save wear and


FAX TO: 800-248-4479 419-244-8887 419-248-4479

[email protected]

‘01 Timberjack 360D Cable SkidderGood condition. Runs strong. Chains on all 4 tires. Rubber about 25%. Enclosed cab. Quebec, Canada


www.LBXonline.com

‘94 Timberjack 230A Cable SkidderRebuilt Engine; 18.4x26 tires at 90%; Pulls great; Owner retiring.


www.LBXonline.com

tear on blades and keep them sharp, it has self log loader, and it comes with Extra Blades. Fully maintained, Oil is changed every 150 hrs. It will cut aprox on average 3,000 board foot a day. - Item ID-11902 - Daren 800-315-9950 x6032007 Cooks Portable Sawmill with portable edger - 2007 AC-36 Cooks Portable Sawmill with portable edger, 301 hours, tires are in good condition and ready to work. 51-hp diesel, setworks, mudsaw, sharpener. Edger is a Cooks 14” - Item ID-12016 - Daren 800-315-9950 x603Armstrong #4 - Bandsaw

Sharpener - complete sharpener for left hand blades from 6” to 14” wide. Comes with a complete full set of saw stands, back feed arm, and filing clamp. Features “Sidewinder” spring loaded feed finger, carbide face plate, plastic cams, and Allen Bradley frequency drive for variable speed on the grinding wheel. Will grind 4” or narrower bands with slight modification. - Item ID-11618 - Daren 800-315-9950 x603Complete Select Sawmill - 6” double cut bandmill. Can produce 15,000 to 20,000 board feet per day. Mill has 1500 hours. Comes with 48 extra blades worth $10,000. purchased new by current

owner. - Item ID-12127 - Daren 800-315-9950 x603Log Decks - The bright colored long deck is a 30’ 2 strand with stop and loader and hydraulic drive. Strand spacing is 48”. Deck is based on 5x10 tube frame. Underneath is a 14’ 2 strand deck with 80” strand spacing. There is a gear box but no motor. Could be hydraulic or electric. can be solld separt MAKE OFFER! - Item ID-11731 - Daren 800-315-9950 x603Lumber transfer 16 ft 4 strand 50 ft 4 strand Green Chain - Item ID-11669 - Daren 800-315-9950 x603

SHAVING EQUIPMENT2006 SALSCO 30 Shaving Mill - Hour meter is not working properly, 83 hp cat, Box is 102”x 30”, has a blower and all knives in blower are in good shape - Item ID-11977 - Daren 800-315-9950 x6032007 SALSCO 30 Shaving Mill with Blower, 1686 hours, 83 hp Cat Engine, Box is 120”x 30” - Item ID-11978 - Daren 800-315-9950 x603Shaving Mill - Shop built, set up 1 year ago. Box is 48”W x 5-1/2’L. All electric, powered a 3-phase electric motor with converter. Comes with all electrical boxes. 2 heads with 3 knives per head. Powered by a 60-hp motor. Includes deck to feed and discharge conveyor. Processes 2 truck loads per hour. Runs about

$150 per month in electric use. - Item ID-11975 - Daren 800-315-9950 x603

TRIM SAWS

AmbitrimGANG TRIM SAW

Fully adjustable. Fully automatic.18”-diameter circular saw blades.

Saws material up to3!” thick " 12” wide.Call (573) 663-7711

Call toll-free: (800) 548-6914

www.logtolumber.com

1988 Mack RW713 Day Cab Log Truck - Mack E6-350, 350 HP, 15 Speed Eaton Fuller Transmission, Spring Ride, GVWR: 52,000, Odometer Reads: 612,933, VIN: 1M2AY10Y0JM003060 - Item ID-12000 - Daren 800-315-9950 x6031989 International Truck with Barko Loader - Model F-2574. 228” wheelbase, 312,000 miles, 100,000 on new Cummins 400 diesel engine; tires are 70%; truck has fresh paint. No leaks, clean and dry 1998 Barko Loader. - Item ID-11655 - Daren 800-315-9950 x6031989 Kenworth T800 Log


HEAVY DUTY FORKSAT BIG SAVINGS

■

■

■

BAY EQUIPMENT CO. / (616) 392-1811

Above forks have capacities from 12,000 lbs. to 30,000 lbs. per pair.

Also, 4”, 5”, 6” thick forks to 168” long.‘97 Mack CL713 w/ 18’ Petty-Built Pup TrailerItem ID: 12130Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Complete Select SawmillItem ID: 12127Contact: Daren 800.315.9950 Ext. 603

www.LBXonline.com

2005 CAT 525B Grapple SkidderItem ID: 12028Contact: Daren800.315.9950 Ext. 603www.LBXonline.com

Truck w/Log Trailer - Cat 3406B Diesel Engine, Fuller RT0187 18-Speed Transmission, 425 Horsepower, 80,000 GVW, 230 Wheelbase, Odometer Reads: 946,784, VIN: 1XKDDB9X6KS536125, with 1984 White Log Trailer, 26’ Length, VIN: SA100WHITLOG84529 - Item ID-12001 - Daren 800-315-9950 x6031996 Clement End Dump Trailer, 24FT X 96IN - Tandem Axle, Spring Suspension, Air Brakes, Steel Wheels, GVW 77120, - Item ID-11997 - Daren 800-315-9950 x6031996 Freightliner w/Prentice 120C Knuckleboom - Knuckleboom mounted behind the cab, Cat 10 speed - Item ID-11593 - Daren 800-315-9950 x6031996 Peterbilt Model 377 - 1996 peterbilt tamdan, 22 foot silage bed with end dump and hyd. gate,roll over tarp, would make a very good grain truck. 9 speed trans. 80% rubber, 475 cat engine, good truck ready

to go to work. just put new shocks on front. bed sides are 60”. - Item ID-11597 - Daren 800-315-9950 x6031997 Mack CH613 w/1997 Sta-Lite Log Loader Trailer - E7 Mack Engine 454-hp; 354,000 miles; 18-speed transmission; 12,000# front axles; 40,000# rear axles; Suspension Air Ride; 80% air brakes, PS, AC, airslide 5th, cruise control, hyd wet kit for log loader, alum headache rack, dual exhaust, includes 1997 Sta-Lite 45 ft x 96” log loader trailer - Item ID-11588 - Daren 800-315-9950 x6031998 MACK CL713 - w/ a 1998 Serco Loader, 25’ Boom, 1/4 Butt Grapple, Pintle Hitch, Tractor Package, Power Divider, Heated Mirrors, AC, Cruise Control. Front axle 20,000, Rears 44,000, Camelback suspension, 135,155 miles, 460 hp, 18 Spd transmission. - Item ID-11529 - Daren 800-315-9950 x6031999 Mack CL 700 Log/Loader Truck w/Tri axle Rosa Pup E-7 Mack @ 460 hp. , 8LL trans.,

cruise, Serco 8000 Loader, dual stack, tool box, alumin fuel tank, just had $11,000 in motor, $4,000 in trans and $6,000 in front/rear tandems 1999 Rosa Crib Trailer 3 axle, a/ride, 22’ deck, 22.5 tires, aluminum wheels, hub piloted - Item ID-11530 - Daren 800-315-9950 x6032002 MACK GRANITE CV713, 464hp, 664,500 miles, 18 spd, air ride suspension, 2002 SERCO 7500 LOADER AND 1996 ROSA PUP TIRES AND BRAKES at 80% - Item ID-11700 - Daren 800-315-9950 x6032003 Mack CH613 - With E7 425 Mack engine, 9 speed, wet kit, air slide fifth wheel, air ride suspension, air conditioning. 210,000 miles. Good tires. - Item ID-11087 - Daren 800-315-9950 x603‘93 Mack with ‘99 Serco 8000 Loader - 93 Mack CL713; Mac E-7 400hp engine; ONLY 160,000 MILES!! 20,000 lb front and 44,000 lb rear; Camel back rear suspension ; New 20-ply steel tires @ 80%; Factory built double steel frame; Complete

HD Mack power train (engine, trany, diff); 3:86 ratio; Jake brake and diff lockout ; 99 Serco 8000# loader with 4 squirt boom; This is a factory built Log Truck. - Item ID-12098 - Tom 800-315-9950 x604

WOODWORKINGMcDonough 54”band saw - This is a square column, weight strain machine. The serial # is 54 1076. - Item ID-11741 - Daren 800-315-9950 x603

Why Is Rotochopper So Special???

Why is it so hard to find a used Rotochopper? Why are our customers so loyal?

Intelligent Design

Technologically advanced grinders that make precisely the right particle size for biomass fuel, landscape mulch, animal bedding, wood flour, wood pellets, gasification, cellulosic ethanol, etc.

Thrifty, energy efficient grinders built for the 21st century and backed up with . . . World class factory service and support.

Give us a call and let a Rotochopper save YOUR world by grinding YOUR products . . . .

“Perfect In One Pass” .

217 West Street St. Martin, MN 56376

6084523651 3205483586

http://www.rotochopper.com [email protected]

Grinding Ag Biomass Grinding Forestry Biomass

Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel



Intelligent Design






6084523651 3205483586



Electric Diesel

THE LUMBERMAN’S EXCHANGE

Post Office Box 1916Columbia, Tennessee 38402

PRSRT STD.U.S. Postage

PAIDPermit No. 212

Pulaski, TN

LBX Online Magazine

Documents

Transcript of LBX Online Magazine