Layout machines - MDM Standard...tion areas are e. g. design, automobile industry, supplying...
Transcript of Layout machines - MDM Standard...tion areas are e. g. design, automobile industry, supplying...
Prec
isio
n m
ade
in G
erm
any
Assistent / Profi / MµTOS
Layout machines
2
AssistentDescription
The Assistent is a manual layout machine with a stable and modular machine concept.
The machine is easy to run even with huge measuring ranges, because of the mounted-
on roller bearings precision guidance. The high-definition scale system, installed in all
axes, always sends the exact measured value and so it contributes significantly to the
accuracy of the machine. Because of the ergonomic handling of the Assistent it is ideal
to perform the most different measuring tasks. The Assistent solves every measuring
assignment, whether equipped with a digital counter for scribing or with a probe system
and an evaluation
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 1200 800 1000
Up to any 2500 3000
Accuracy: 16 + l/100
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Layo
ut m
achi
ne A
ssis
tent
Guidance variation
The Assistent is available as a single and a duplex
version. It is available with the following guidance
variations: Guidance of the X-axis guided side-
ward at the measuring plate / measuring beam.
Guidance of the X-axis guided on the measuring
plate / measuring beam.
Prec
isio
n m
ade
in G
erm
any
3
Assistent - Layout machine
4
ProfiDescription
You will find all positive characteristics of the Assistent also at the CNC layout machine
Profi, such as a modular machine concept, the mounted-on roller bearings precision
guidance and the high-definition scale system. In conjunction with the high-precision
direct drive concept and a powerful measuring machine controller the Profi is a high-
power CNC layout measuring machine. The disengage of the power units for a manu-
al use of the machine is possible (option). As the Profi is suitable for workshops it is
possible to establish the machine in an environment close to the production. Applica-
tion areas are e. g. design, automobile industry, supplying industry, tool manufacture,
mould construction and jig manufacturing.
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 1200 800 1000
Up to any 2500 3000
Accuracy: 16 + l/100
Layo
ut m
achi
ne P
rofi
Guidance variation
The Profi is available as a single and a duplex ver-
sion. It is available with the following guidance va-
riations: Guidance of the X-axis guided sideward at
the measuring plate / measuring beam. Guidance
of the X-axis guided on the measuring plate /
measuring beam.
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Prec
isio
n m
ade
in G
erm
any
5
Profi - Layout machine
6
MµTOSDescription
MµTOS is a premium CNC layout machine. It was designed especially for huge measu-
ring volumes and you can only use it as a CNC machine. Because of the solid machine
concept, the mounted-on roller bearings precision guidance, the high-definition scale
system and the powerful drive engineering the MµTOS owns a maximum on perfor-
mance and accuracy. Depending on the design of the Z-axes (height) we can deliver the
MµTOS in two guidance widths. That is why we can guarantee the high accuracy in the
Y-axes, even with a huge measuring range. A ground level installation with traversable
covers enables an optimal accessibility to big measuring objects. The MµTOS can be
used in an environment close to the production because of the complete capsuled gui-
de tracks. Application areas are e. g. design, automobile industry, supplying industry,
tool manufacture, mould construction and jig manufacturing.
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 2200 1200 1600
Up to any 2500 3500
Accuracy: 20 + l/100 < 60
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Layo
ut m
achi
ne M
µTO
S
Guidance variation
The MµTOS is available as a single and a du-
plex version. It is available with a Guidance of
the X-axis guided sideward at the measuring
plate / measuring beam.
Prec
isio
n m
ade
in G
erm
any
7
MµTOS - Layout machine
8
Controller and handboxesController
We offer a wide range of controllers for all types of coordinate measuring machines.
The field of application is unlimited. Whether layout-CMMs, bridge type CMMs, gear
measuring machines, milling or controller of special machines – we have the exact so-
lution! The controller supports a plurality of probe heads and scan interfaces. At any
time, they are expansible with several options such as a temperature compensation.
You don’t need an additional software because of the INCA3D software-driver. This
increases the user-friendliness and of course also the safety of operation. Certainly,
there is also the possibility to connect the controller with the measuring software via
I++ Interface.
Layo
ut m
achi
ne C
ontr
olle
r an
d ha
ndbo
xes
Prec
isio
n m
ade
in G
erm
any
9
Handboxes
The usability of the measuring system by a handbox is an important item of the daily work. The used handbo-
xes provide you with a remarkable performance, an ergonomic design and high functionality with their robust
and light case, even by difficult operating conditions like in a production area.
Whether with a cable version or a wireless version, with a display or without we offer you the best ease of use.
Cable handbox » Robust and reliable
» Economical standard solution
» Well-tried technology
» Ergonomic design, intuitive handling
Wireless handbox » Robust and reliable
» Free programmable
» Touch screen with all important information
at first sight
10
Probe Systems
Additional options for all measuring machines
Layout machines are compatible with various probe systems:
» PH6 fixed probe head
» PH10T motorised indexing probe head
» PH10M motorized indexing probe head
» PHS1 continuously indexing probe head
» TP20 probe system
» TP200 probe system
» Alternative probe systems on request
» Optical 3D sensors on request
» Change racks for our probe systems on request
» Active pneumatic shock absorption
» Active temperature compensation in all axes incl. workpiece
PH10M with TP20 probe system
PH10M with TP200 probe system
Layo
ut m
achi
ne A
dditi
onal
opt
ions
, Pro
be S
yste
ms
and
Soft
war
e
Prec
isio
n m
ade
in G
erm
any
11
SoftwareINCA3D Highlights
INCA3D is suitable for multisided applications for example at automobile industry, aerospace, design area,
modeling, tool manufacture and measuring of free forming. You can use our software both with manual
machines, CNC machines or measuring arms. The used mathematical calculation methods are certificated
by PTB. The analysis of GD&T is done to ISO 1101 and ASME Y14.5M. INCA3D has an intuitive and automatic
action recognition. Furthermore, INCA3D has an own DMIS converter and a bidirectional I++ DME Interface
(server & client).
INCA3D is intuitive and easy to use for example for geometry, CAD measurement, 3D point cloud management,
scanning, milling, statistic and offline programming on the same operating interface. Because of the high-
power label and report editor you can create any kind of significant measurement reports easy and quickly.
INCA3D support » Tactile, scanning and contact-free probe systems
» Manual and automatically indexable and continuously probe heads
» Change racks
» Additional axis such as rotary tables
» Complete machine error correction (CAA) calculation via 21 parameters
» Machine and workpiece temperature compensation
» Duplex and triplex management in real time via TCP / IP with automatic synchronization
and crash prediction
» Additional Software options, such as different output formats, multipart execution,
high level extensions, macros, tube check
» Incidentally most machines of other manufacturers can be retrofitted to INCA3D Software.
INCA3D user interface
INCA3Dfreeform measurement
MORA Metrology GmbH
Dieselstraße 563741 AschaffenburgGermany
Phone: + 49 (0)6021 4029-0Fax: + 49 (0)6021 4029-329
Mail: [email protected]: www.mora-metrology.de
Layout machines: version 1.0 Mistakes, changes and amendments reserve.
© 2017 CHIMERICAL GMBH - www.chimerical.de
Primus / Primus L / Primus GT
Bridge type machines
Prec
isio
n m
ade
in G
erm
any
Prec
isio
n m
ade
in G
erm
any
32
PrimusDescription
Our bridge type measuring machine Primus presents a compact and stable machine
concept, which is rounded by high-precision air bearing guidance and dynamic gears
in all axes. A high-precision scale system in conjunction with a powerful controller
guarantees the accuracy of the machine. By using granite in all axes, we ensure a
constant thermal behavior of the coordinate measuring machine. Our bridge type
measuring machine Primus you can find in all divisions of the production and the
quality assurance. If in the prototype construction or in run-production - the Primus is
applicable universally.
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 500 700 500
Up to 1500 5000 1200
Accuracy: 1,3 + l/300
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Primus - Bridge type machine
Brid
ge ty
pe m
achi
ne P
rim
us
Prec
isio
n m
ade
in G
erm
any
54
Brid
ge ty
pe m
achi
ne P
rim
us L
Primus LDescription
Our bridge type measuring machine Primus L presents a compact and stable machine
concept. The mass which is moved is reduced because of the overhead guide axis. That
is why we can realise a bigger measuring range of the other axes without resigning
the dynamic and accuracy. The Primus L has also, like the Primus, high-precision air
bearing guidance and dynamic gears in all axes. The high-definition scale system in
conjunction with a powerful controller guarantees a tight accuracy.
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 1200 1500 100
Up to 1800 4000 1600
Accuracy: 1,9 + l/300
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Primus L - Bridge type machine
Prec
isio
n m
ade
in G
erm
any
76
Brid
ge ty
pe m
achi
ne P
rim
us G
T
Primus GTDescription
The high-portal measuring machine Primus GT has, compared to the Primus L, two
overhead guide axes, which are furnished with a dynamic and high-precision twin
drive. Separated by this weight reduction of the mass which is moved we can realise
huge measuring ranges without resigning the dynamic and accuracy. The Primus GT
has also, beside the Primus and Primus L, high-precision air bearing guidance and dy-
namic gears in all axes. The high-definition scale system in conjunction with a powerful
controller complete the entire machine concept.
Measuring ranges and accuracy
Axis X/length Y/width Z/height
From 2500 3000 1800
Up to 3500 10000 3000
Accuracy: 5,5 + l/1000
The stated accuracy true for the smallest measuring range and for a surrounding temperature of 20° C. Special sizes and special accuracies available on request.
Primus GT - Bridge type machine
Additional options for all measuring machines
» Active shock absorption
» Active temperature compensation in all axes incl. workpiece
» Air preparation facilities (e. g. air dryer)
» Delivery systems and palletising systems
Prec
isio
n m
ade
in G
erm
any
98
Brid
ge ty
pe m
achi
nes
Cont
rolle
r an
d ha
ndbo
xes
Controller and handboxesController
We offer a wide range of controllers for all types of coordinate measuring machines.
The field of application is unlimited. Whether layout-CMMs, bridge type CMMs, gear
measuring machines, milling or controller of special machines – we have the exact so-
lution! The controller supports a plurality of probe heads and scan interfaces. At any
time, they are expansible with several options such as a temperature compensation.
You don’t need an additional software because of the INCA3D software-driver. This
increases the user-friendliness and of course also the safety of operation. Certainly,
there is also the possibility to connect the controller with the measuring software via
I++ Interface.
Handboxes
The usability of the measuring system by a handbox is an important item of the daily work. The used handbo-
xes provide you with a remarkable performance, an ergonomic design and high functionality with their robust
and light case, even by difficult operating conditions like in a production area.
Whether with a cable version or a wireless version, with a display or without we offer you the best ease of use.
Cable handbox » Robust and reliable
» Economical standard solution
» Well-tried technology
» Ergonomic design, intuitive handling
Wireless handbox » Robust and reliable
» Free programmable
» Touch screen with all important information
at first sight
Prec
isio
n m
ade
in G
erm
any
1110
Port
alm
essm
asch
ine
Prob
e Sy
stem
s an
d So
ftw
are
Probe Systems SoftwarePrimus GT is compatible with various probe systems:
» PH6 fixed probe head
» PH10T motorised indexing probe head
» PH10M motorized indexing probe head
» PH20 continuously indexing probe head
» REVO continuously indexing probe head
» TP20 probe system
» TP200 probe system
» SP25 scanning probe
» Alternative probe systems on request
» Optical 3D sensors on request
» Change racks for our probe systems on request
INCA3D Highlights
INCA3D is suitable for multisided applications for example at automobile industry, aerospace, design area,
modeling, tool manufacture and measuring of free forming. You can use our software both with manual
machines, CNC machines or measuring arms. The used mathematical calculation methods are certificated
by PTB. The analysis of GD&T is done to ISO 1101 and ASME Y14.5M. INCA3D has an intuitive and automatic
action recognition. Furthermore, INCA3D has an own DMIS converter and a bidirectional I++ DME Interface
(server & client).
INCA3D is intuitive and easy to use for example for geometry, CAD measurement, 3D point cloud management,
scanning, milling, statistic and offline programming on the same operating interface. Because of the high-
power label and report editor you can create any kind of significant measurement reports easy and quickly.
INCA3D support » Tactile, scanning and contact-free probe systems
» Manual and automatically indexable and continuously probe heads
» Change racks
» Additional axis such as rotary tables
» Complete machine error correction (CAA) calculation via 21 parameters
» Machine and workpiece temperature compensation
» Duplex and triplex management in real time via TCP / IP with automatic synchronization
and crash prediction
» Additional Software options, such as different output formats, multipart execution,
high level extensions, macros, tube check
» Incidentally most machines of other manufacturers can be retrofitted to INCA3D Software.
PH10M with TP200 probe system
INCA3D user interface
PH10M with TP20 probe system
PH10M with SP25 scanning probe
PH20 continuously indexing probe head
REVO continuously indexing probe head
INCA3Dfreeform measurement
MORA Metrology GmbH
Dieselstraße 563741 AschaffenburgGermany
Phone: + 49 (0)6021 4029-0Fax: + 49 (0)6021 4029-329
Mail: [email protected]: www.mora-metrology.de
Bridge type machine: version 1.0 Mistakes, changes and amendments reserve.
© 2017 CHIMERICAL GMBH - www.chimerical.de