LAYING INSTRUCTION AND IMPORTANT...
Transcript of LAYING INSTRUCTION AND IMPORTANT...
LAYING INSTRUCTION AND IMPORTANT INFORMATION
LAMINATE FLOORING
1
• Check the product thoroughly before installing it or giving it to your installer
• Products with defects should never be installed
• Make sure the purchased product is in line with in-store sampling
• Before you start, check boxes compatibility together (Gloss rate, Coloring, Embossing)
• Installation must be done by a specialized installer with good knowledge of laminate flooring
• To avoid dissatisfaction, test a control board before starting the installation (hardness, scratches, impact)
• The ambient humidity of the room must not exceed 60% during installation
• Plywood subfloor moisture must not exceed 11% during installation
• The moisture content of the concrete subfloor must not exceed 4% during installation
• Painting, plastering and slab repairs must be completed within 45 days
• Moisture must be stable and controlled before laying
• Expansion moldings should always be considered during installation
• Make sure that the membrane is compatible with the product that will be installed
• Check if the purchased product is compatible with the Glycol and Electric Radiant Heating System
• A floating installation must always allow the product to expand or contract
• Tables, chairs, appliances and other furniture must be always protected
• A defect that is visible before installation is not covered by the manufacturer’s warranty
• Failure to follow instructions will automatically void the manufacturer’s warranty
• If in doubt about the quality of the products, stop the installation and contact your dealer
• An installed product is considered to be accepted by the consumer
2