Launch and Recovery Systems • Low dip A-frame with ...€¦ · A-frame handling systems MacArtney...
Transcript of Launch and Recovery Systems • Low dip A-frame with ...€¦ · A-frame handling systems MacArtney...
08
Our hydraulic driven LARS can be designed as portable systems, compact fixed
systems or as fully integrated winch and handling systems.
Docking mechanisms and turntable designs can be supplied in a range of
standard designs or tailor made to suit the requirements of the application and
the winch. The A-frame can be mounted on a single skid or as separate units as
preferred. If the winch is hydraulic driven, the power unit for the winch can also
be used to power the LARS.
All systems are designed and built according to DNV’s Standard
for Certification no. 2.22 - Lifting Appliances.
Portable A-frame handling systems
Our compact portable A-frame systems are designed to incorporate
our Cormac and oceanographic winches for efficient handling of
inspection ROVs, side scan sonar, survey equipment, oceano-
graphic instrumentation and a wide range of other equipment.
They are easy to control and provide the outreach needed
for safe launch and recovery. They can be supplied
with or without a power unit. We also offer other
basic over the side handling systems, including
J-frames and davits.
Launch and Recovery Systems
MacArtney launch and recovery systems (LARS) provide reliable and fully controllable deployment, operation and recovery of a wide scope of equipment – from small sonar and oceanographic systems to large work class ROVs.
Compact A-frame handling systems
MacArtney compact A-frame systems require mini-
mum deck space. Systems can be supplied as standard
or tailor made, with or without telescopic arms.
Standard systems:
• ArticulatingA-frame
• 45°launchpositionA-frame
• 45°launchpositionA-framewithtelescopic
arms
• HorizontallaunchpositionA-frame
with telescopic arms
• LowdipA-framewithtelescopicarms
Container integrated
A-frame handling systems
MacArtney can offer a range of launch and recovery
systems with built in umbilical and guide wire winches
integrated into a standard 20’ container. The winch and
A-frame are designed to DNV’s Standard for Certification
no. 2.22 - Lifting Appliances. The container frame is
designed to meet DNV 2.7-1 approvals for transportation
and installation around the world.
Container integrated handling system Portable articulating A-frame handling system
MacArtney launch and recovery system with standard A-frame
Articulating A-frameHorizontalA-frame
Profiling current meter system
• A-framew.skidforwinch• Cormac5winch• Slipring• 3000msteelarmouredcable• Installationofslipring• Terminationandspoolingofcable• Profilingcurrentmeter• SparepartsforA-frameandwinch• Installation,commissioning,SATandtraining
Entire solution supplied by MacArtney
Compensat
ion
Act
ive Heave
MAC
Deck unit
Current meter
Cormac 5winch
Steel armoured coax cable
A-frame
Slip ring