Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours...
-
Upload
nancy-long -
Category
Documents
-
view
213 -
download
0
Transcript of Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours...
![Page 1: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/1.jpg)
Lathe machining (simple)Lathe machining (simple)
Contents
![Page 2: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/2.jpg)
Geometry model definitionGeometry model definition
In the given example the 2D contours for the part and the workpiece are created with 2D Geometry subsystem.
Contours of the part and the workpiece
Contour image in the graphic window
A folder containing the geometry of the part and the workpiece drafted with the 2D Geometry
Contents
![Page 3: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/3.jpg)
Machine selectionMachine selection
Lathe ZX machine will be used for the current project .
Machine parameters menu
Machine selection dialog
List of available machines
Desired machine
Contents
![Page 4: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/4.jpg)
Part definintionPart definintion
The part is defined as a solid of rotation of the part contour that we created earlier.
Machining tab
Part tab
Create solid by rotation
Part contour
Rotation solid
Contents
![Page 5: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/5.jpg)
Workpiece definitionWorkpiece definition
The workpiece is created in the same way as the part, by rotating the workpiece contour defined earlier.
Workpiece tab
Default workpiece
Create solid by rotation
Workpiece rotation solid
Rotation solid
Workpiece contour
Contents
![Page 6: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/6.jpg)
Creating operationCreating operation
The first operation is Lathe Facing.
Create operation menu
Roughing operations group
Lathe Facing operationNew operation
Contents
![Page 7: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/7.jpg)
Job assignmentJob assignment
Part contour
The default job assignment for the new operation is the solid of rotation of the contour of the part that we labeled as Part earlier.
Rotation solid
Contents
![Page 8: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/8.jpg)
Machining parametersMachining parameters
Active operation
Machining parameters of operation
Lets examine main parameters of the Lathe facing operation.
Contents
![Page 9: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/9.jpg)
ToolToolВыбор инструмента из группы External toolholder определяет выбор режущей пластины и державки
Выбор инструмента из группы External toolholder определяет выбор режущей пластины и державки
Select a tool from the External toolholder group to define the insert and toolholder
Contents
![Page 10: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/10.jpg)
Feeds/Speeds and Lead in/Lead outFeeds/Speeds and Lead in/Lead out
Cutting speed is constant regardless of machined sureface diameter
Lead in/Lead out под определенным углом на заданном расстоянии
Lead in/Lead out at specified angle and at set distance
Contents
![Page 11: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/11.jpg)
ParametersParameters
Number of roughing passes
Finishing pass
Lead in value
Contents
![Page 12: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/12.jpg)
Toolpath calculationToolpath calculation
Perform toolpath calculation
A sign that toolpath is calculated successfully
Toolpath
Toolholder and insert
Contents
![Page 13: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/13.jpg)
Machining simulationMachining simulation
Workpiece
Tool
Machining result of the Lathe Facing operation
Contents
![Page 14: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/14.jpg)
Create operationCreate operation
The next operation is the Lathe Roughing operation. Select the Fill parameters option to pass the previous operation’s parameters into the new one.
Create operation menu
Roughing operations group
Lathe Roughing operation
Use Fill parameters option to copy parameters from the previous operation into the new one
New operation
Contents
![Page 15: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/15.jpg)
We selected the Fill parameters for when creating the new operation so all parameters from the Lathe Facing operation(including the job assignment) were passed into the new operation. Therefore the Lathe Roughing operation’s job assignment is the solid of ration of the Part contour defined earlier
Job assignmentJob assignment
Part contour
Rotation solid
Contents
![Page 16: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/16.jpg)
Toolpath calculationToolpath calculation
Run toolpath calculation
Calculated toolpath
Green tick for success
Contents
![Page 17: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/17.jpg)
Machining simulationMachining simulation
Material left from previous operation
Tool
Machining result of the Lathe Roughing operation
Contents
![Page 18: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/18.jpg)
Create operationCreate operation
The next operation we add to the project is the Lathe Finishing operation.
Create operation menu
Operations group
Lathe Finishing operation
New opearation
Contents
![Page 19: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/19.jpg)
Operation can specify several areas of part as job assignment.
Job assignmentJob assignment
Select previously defined contour of rotation solid as job assignment
Job assignment
Select method of definition of the job assignment
Definition method – Between two points
The job assignment – a part of the contour bounded by to points
Contents
![Page 20: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/20.jpg)
Machining parametersMachining parameters
Contents
![Page 21: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/21.jpg)
ToolpathToolpath
Calculate the toolpath
Calculation successful
Toolpath
Contents
![Page 22: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/22.jpg)
Machining simulationMachining simulation
Residual material of previous operations
Machining result of Lathe Finishing operation
Contents
![Page 23: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/23.jpg)
Create operationCreate operation
Next operation - Lathe Grooving operation.
Create operation menu
Group of operations
Lathe Grooving operation
New operation
Contents
![Page 24: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/24.jpg)
Job assignment will be a part of the contour used to create the rotation solid of the part defined as the Part earlier.
Job assignmentJob assignment
Job assignment – a part of the contour bounded by two points
Definition method – between two points
Contents
![Page 25: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/25.jpg)
Operation parametersOperation parameters
Contents
![Page 26: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/26.jpg)
ToolpathToolpath
Calculate toolpath
Indicates calculation success
Toolpath
Contents
![Page 27: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/27.jpg)
Machining resultMachining result
Residual material of previous operations
Lathe Finishing operation’s machining result
Contents
![Page 28: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/28.jpg)
Tools list formingTools list forming
Create Tools list
Tools list dialog
Views configuration
Objects visibility panel
Document template
Contents
![Page 29: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/29.jpg)
Tools listTools list
List of operations
Document heading
List of tools
Machining time
Views of geometry model
Contents
![Page 30: Lathe machining (simple) Contents. Geometry model definition In the given example the 2D contours for the part and the workpiece are created with 2D Geometry.](https://reader030.fdocuments.in/reader030/viewer/2022032703/56649d1c5503460f949f1a52/html5/thumbnails/30.jpg)
PostprocessorsPostprocessors
NC-program generation
Postprocessor file
NC-program file
NC-program listing
Contents