Effect of annulus drilling fluid on lateral vibration of ...
Lateral Vibration Prediction Issues Yuriy Batrak
-
Upload
svistomina -
Category
Documents
-
view
376 -
download
5
Transcript of Lateral Vibration Prediction Issues Yuriy Batrak
![Page 1: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/1.jpg)
Lateral Vibration Prediction Issues
Dr. Yuriy BatrakIntellectual Maritime Technologies
Ship Noise and Vibration ConferenceNovember 24, 2010, London
www.shaftdesigner.com
![Page 2: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/2.jpg)
Do we need to predict the lateral vibration?
![Page 3: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/3.jpg)
The one third of the ship problems by cost
for 1998-2006 is related to machinery
![Page 4: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/4.jpg)
Propulsion claims take 2nd place after main engine claims
¼ by costs of the machinery claims
![Page 5: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/5.jpg)
Unduly operating propulsion system causes…
• complete shafting system destruction;
• shaft and shaft elements fatigue life reduction;
• fatigue cracks at the shaft brackets and foundations;
• stern tube bearing fatigue damage;
• increased wear and damage of the sealing;
• excessive noise, hull and superstructure vibrations
Propulsion system lateral vibration contributes to accident rate!
![Page 6: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/6.jpg)
Lateral vibration destroyed high speed shaftline with cardans
Relation (span/diameter) for one of the shafts was exceeded recommended 20
![Page 7: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/7.jpg)
Shafting damages by vessel types
![Page 8: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/8.jpg)
Why tugs and supply vessels?
frequent switching from ahead to astern operation
fatigue and other vibration related damages
![Page 9: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/9.jpg)
Aft stern tube bearing damages
DNV statistics
![Page 10: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/10.jpg)
Bearing material fatigue
DNV Photo
Fatigue damage of the aft stern tube bearing caused by the propeller shaft lateral vibration
![Page 11: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/11.jpg)
Sealing wearing and sea water pollution
Increased lateral vibration speeds up the sealing wearing and promotes sea water pollution with oil
![Page 12: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/12.jpg)
Partially immersed propeller
• increases shaft vibrations
• affects stern tube bearings significantly
![Page 13: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/13.jpg)
Lateral, bending, transverse or whirling vibration?
![Page 14: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/14.jpg)
Classification Societies terms
Classificaton Society Term used
Bureau Veritas (BV) Bending vibration
Germanischer Lloyd (GL) Bending vibration
Korean (KR) Bending vibration
RINA Bending vibration
Russian Maritime Register (RS) Bending vibration
Indian Register of Shipping (IRS) Lateral vibration
Lloyd’s Register of Shipping (LR) Lateral vibration
Nippon Kaiji Kiokai (NK) Lateral vibration
American Bureau of Shipping (ABS) Lateral (Whirling) vibration
Det Norske Veritas (DNV) Whirling vibration, Lateral vibration
China Classification Society (CCS) Whirling vibration
The variety of used terms is a reflection of a certain ambiguity of this type vibration definition
![Page 15: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/15.jpg)
Lateral vibration Lateral vibration occurs when the direction of beam motion is normal to the centerline of a beam.
However to imagine the propulsion system lateral vibration we never think about solid body lateral motions.
The first that we think about is a beam bending deformations when beam points move from side to side up and down due to the shaft flexibility.
Definition:
![Page 16: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/16.jpg)
Lateral, transverse or bending?
• Terms ‘lateral’ and ‘transverse’ accentuate the beam motions
• Term ‘bending’ emphasizes the beam flexibility phenomenon
When the solid body motions are not impossible or we do not take them into account all terms are the SYNONYMS!
![Page 17: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/17.jpg)
LVA Mathematics
![Page 18: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/18.jpg)
www.shaftdesigner.com
( ) ( ) ( ) ( ),t t t t MX CX KX F
( )tX
M
C
K
F
- vector of the deflections and slope angles at the system nodes;
- mass matrix;
- damping matrix;
- stiffness matrix;
- excitation forces vector.
where:
Lateral vibration equation(n-degree-of-freedom mechanical system)
![Page 19: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/19.jpg)
Vibration glossaryFree vibration Occurs when F(t) =0 i.e. a mechanical system vibrates freely after an
initial motion was applied
Forced vibration Occurs where an alternating force F(t) ≠0 is applied to a mechanical system. In forced vibration the alternating force F(t) does not disappear when the excited motion is prevented
Self-excited vibrationOccurs where the alternating force F(t) that sustains the vibration motion is created or controlled by the vibration motion itself. When the motion stops the alternating force F(t) disappears
Steady vibration Vibration of a mechanical system caused by a periodic excitation when free vibration oscillations have decayed.
Harmonic excitation Occurs when the periodic excitation force alternates according to the harmonic law: F(t)=Asin(ωt+ψ)
Transient vibration Occurs when a non periodic alternating force F(t) is applied
Parametric vibration Occurs when mass M and/or damping C and/or stiffness K of a mechanical system are variable (M(t), C(t), K(t)), but not depend on vibration motion
Non liner vibration Occurs when mass M and/or damping C and/or stiffness K of a mechanical system depend on vibration motion X(t)
Non damped vibration Occurs when damping in vibrating system is equal to zero C=0
![Page 20: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/20.jpg)
Weakly damped system
For weakly damped propulsion systems free vibration problem can be solved using the equation for non damped vibration
( ) ( ) .t t MX KX 0
Non damped natural frequencies and mode shapes are the main results of the free vibration calculation.
![Page 21: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/21.jpg)
Non damped natural frequencies and mode shapes
![Page 22: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/22.jpg)
Single span beam excited in two planes simultaneously
For a single span uniform beam, steady non damped forced vibration is a polyharmonical motion which is the sum of the two harmonic motions.
![Page 23: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/23.jpg)
Shaft centerline point orbits
Shaft centerline points have a shape of Lissajou’s figures depending on frequencies relation and phase difference of the motions
![Page 24: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/24.jpg)
Plane-parallel motion
When beam centerline orbit shape is an ellipse or a circle, it moves around geometry axis with a constant angular speed:
This motion is plane-parallel, i.e. shaft sections do not rotate around the cross section center.
x y
![Page 25: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/25.jpg)
Precession
Every point of a flexible rotating shaft moves with angular speed around the tangent to deflection curve of the shaft.
At the same time there are no obstacles for the rotating shaft to vibrate in two orthogonally related planes if correspondent alternating forces are applied.
As a result the shaft axis points will travel in the space along the beam vibration orbits.
In the classical Mechanics the motion of the rotation axis is known as the precession.
![Page 26: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/26.jpg)
Whirling vibration terms
Conventional name for the precession motion of a rotating shaft is whirling.
When the directions of shaft rotation speed ω and circular or elliptical
whirling speed Ω coincide, whirling is referred as a forward whirling.
If the directions are opposite, a circular or elliptical whirling is referred as a backward whirling.
When |Ω|= ω it is the case of a synchronous whirling otherwise it is an
asynchronous whirling |Ω| ≠ ω ).
![Page 27: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/27.jpg)
Whirling of non rotating shaft(lateral vibration in two planes)
0 2 4 6
1
0.5
0
0.5
1
1
1
0 t( )
2 0 t
Ω / ω = 0
Surface point orbit Bending stress
![Page 28: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/28.jpg)
Forward asynchronous whirling
0 2 4 6
1
0.5
0
0.5
1
1 t( )
t
Ω / ω = 5
Surface point orbit Bending stress
![Page 29: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/29.jpg)
Forward synchronous whirling
0 2 4 61
0.5
0
0.5
1
2 t( )
t
Ω / ω = 1
Surface point orbit Bending stress
![Page 30: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/30.jpg)
Backward asynchronous whirling
0 2 4 61
0.5
0
0.5
1
3 t( )
t
Ω / ω = -5
Surface point orbit Bending stress
![Page 31: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/31.jpg)
Main sources of propulsion shafting whirling vibration
• pulsating hydrodynamic forces on propeller;• radial excitation forces in reciprocating engines;• pulsating lubrication pressures in plain bearings;• friction forces in shaft material and couplings.• unbalance;• shaft misalignment due to assembly errors or
manufacture defects;• manufacture defects in gearing.
![Page 32: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/32.jpg)
Summary
1. Vibration of non rotating propulsion shaft system should be referred as a lateral vibration.
2. If the shaft cannot loss contact with the point wise supports lateral vibration may be referred as a bending vibration.
3. Transverse vibration is a bending vibration in the horizontal plane.
4. Simultaneous lateral vibrations of non rotating propulsion shaft system in the vertical and horizontal planes may be considered as a whirling vibration.
5. Vibration of a rotating propulsion shaft system should be considered as a whirling vibration in any circumstances
![Page 33: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/33.jpg)
Gyroscopic effect
![Page 34: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/34.jpg)
Gyroscopic moment
In a propulsion system, equipped with a heavy propeller, gyroscopic effect can influence the whirling vibration. When a huge mass with large polar and diametric inertia moments rotates gyroscopic moment arises:
gyrM
2 ,gyr dM A I 1 p
d
IA S
I
S
pI
dI
- polar inertia;
- diametric inertia;
- whirling factor (positive for forward whirling and negative for backward whirling).
- shaft rotation speed;
- whirling speed;
- shaft slope at the propeller node;
![Page 35: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/35.jpg)
Gyroscopic moment can be positive and negative
• Positive gyroscopic moment increases deflections of a rotating shaft i.e. makes shaft ‘softer’
• Negative gyroscopic moment counteracts shaft deflection i.e. makes shaft ‘stiffer’
![Page 36: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/36.jpg)
Natural frequencies for both types of whirling
Natural frequencies for both types of whirling, calculated depending on shaft rotation speed, usually are shown in the Campbell diagram.
![Page 37: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/37.jpg)
Mode shapes of the multi-span beam whirling vibration
![Page 38: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/38.jpg)
Critical speeds concept
• Speed of a rotating propulsion shaft at which severe vibration occurs is known as a critical speed.
• Critical speeds of weakly damped propulsion system coincide with the natural frequencies of the shaft whirling vibration.
• In cases when shaft is supported by the bearings which have different stiffness in horizontal and vertical plane (anisotropic bearings) twice as many critical speeds exist (separate for vertical and horizontal vibration).
![Page 39: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/39.jpg)
Sources of whirling vibration
![Page 40: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/40.jpg)
The sources of propulsion system whirling vibration
• propeller fluctuating loads; • diesel engine excitation; • oil whirl and oil whip;• hysteretic excitation; • unbalance;• alignment-related errors;• manufacture defects in gearing.
![Page 41: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/41.jpg)
Propeller hydrodynamic loads• Transverse hydrodynamic
loads on the propeller are the main source of the whirling vibration of a propulsion system.
• Transverse hydrodynamic loads arise because an effective hydrodynamic force is not directed along the shaft centerline.
• Hydrodynamic loads must be determined as accurately as possible.
Propeller hydrodynamic loads consist of constant and fluctuating component!
![Page 42: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/42.jpg)
Constant and fluctuating hydrodynamic components
Measured bending stresses in two propeller shaft sections
The fluctuating components of the hydrodynamic loads excite intensive whirling vibration of the propulsion shafting at the range 75-95 rpm.
The red line corresponds to the constant component of hydrodynamic loads.
![Page 43: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/43.jpg)
Locus of the effective thrust force
Locus of the effective thrust force travels along the closed path that results in variable vertical and horizontal moments.The thrust force has some variable inclination angle to the propeller axis that results in variable vertical and horizontal forces.
Propeller hub
![Page 44: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/44.jpg)
Fluctuating components of the propeller hydrodynamic loads
![Page 45: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/45.jpg)
Fluctuating bending moment at the thrust bearing
The fluctuating component of the thrust can excite propulsion shafting whirling vibration owing to an alternate bending moment produced by the thrust bearing.
![Page 46: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/46.jpg)
Diesel engine excitation
• excites whirling vibration in the same way as a torsional vibration is excited;
• the most reliable data for radial components of gas pressures are supplied by the engine manufacturers;
• all the problems of radial diesel engine harmonic coefficients determination is similar to the torsional vibration problems.
![Page 47: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/47.jpg)
Oil whirl and oil whip
Oil whirl and oil whip relevant to high speed rotors
Below twice the first critical speed circulatory forces in lubricating film excite shaft whirling with the speed equal to one-half of the rotation speed.
Oil whip starts at twice of critical speed (mainly at low loaded bearings) and continue exists beyond that speed.
![Page 48: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/48.jpg)
Hysteretic excitation
Whirling of a high speed rotors due to:• hysteretic damping in shaft material,• friction in the shaft couplings
is a self-excited vibration.
Hysteretic excitation is specific for the speeds above the critical speed.
Friction excites a backward whirling
![Page 49: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/49.jpg)
Unbalance
• A propulsion shafting system is never perfectly balanced. Due to material inhomogeneity the center of gravity does not coincide with the rotation axis.
• When the shaft rotates, the eccentric masses produce exciting centrifugal force.
• Unbalance excites forward synchronous whirling.• Significant unbalance of a propulsion systems is
prevented by special technological standards and survey procedures.
![Page 50: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/50.jpg)
Alignment-related errors
Alignment-related errors excite first order synchronous whirling vibration.
Such errors must be prevented by adherence to the technological specifications and standards of shaft manufacture and alignment processes.
![Page 51: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/51.jpg)
Manufacture defects in gearing
Manufacture defects in gearing are the possible source of harmful whirling vibration too. It should be taken into account when whirling vibration problems of geared installations are under consideration.
Gearing excited vibration can be easily identified due to high frequency of vibration. But similar to alignment-related errors they never been taken into account in whirling vibration calculation
![Page 52: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/52.jpg)
Shaft Modeling
![Page 53: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/53.jpg)
Propulsion shaft line and its FEM model
![Page 54: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/54.jpg)
FEM model parametersEvery shaft lumped mass has three characteristics, calculated as a half sum of the adjacent elements characteristics:• mass;• diametric inertia moment;• polar inertia moment.
Every flexible shaft element has five characteristics:• length;• cross section inertia moment;• effective section area;• module of elasticity;• Poisson’s ratio. Section and material
characteristics are the same for vertical and horizontal bending.
![Page 55: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/55.jpg)
Lined elements
When the propeller shaft is lined for sea water corrosion protection element characteristics are calculated using liner dimension and material properties
Inertia moment of a lined element
44 164
L LE EI d d t
E E
![Page 56: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/56.jpg)
Added mass
When the shaft element is submerged in a liquid its mass must be increased by added mass .
20m r
0
m
m
The increasing of propeller shaft mass leads to the lowering of critical speeds!
m
r
R
shaft radius;
stern tube internal radius;
liquid density.
![Page 57: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/57.jpg)
Added mass influenceThe “Rotterdam” ship has 3-blade propeller so the forward whirling of the 3-rd excitation order is of a main importance.
Without added mass of the propeller shaft Added mass of the propeller shaft is taken into account
![Page 58: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/58.jpg)
Flanged couplings
Geometric characteristics of short shaft elements with abrupt changing of diameters (such a shaft flange) must be reduced, because element’s material is not fully involved in bending deformations:
![Page 59: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/59.jpg)
Crankshafts
• complicate structure for mass and stiffness characteristics modeling;• manufacturers never supply mass elastic system for the lateral
vibration;• for the propulsion shafting vibration calculation 3D detailed modeling
is excessive;• elements inertia moments and element stiffness are dependent on
shaft rotation angle.
Crankshaft 3-D solid model
![Page 60: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/60.jpg)
Main bearing loads with one turn
In whirling vibration calculation mean effective values of mass and stiffness characteristics of the crankshaft are usually used.
It is supposed that due to the relatively short distances between engine bearings whirling vibration amplitudes of the whole propulsion system are not affected significantly.
(J. Bergande)
![Page 61: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/61.jpg)
Bearings Modeling
![Page 62: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/62.jpg)
Bearings are the lengthy supports
In whirling vibration propulsion shafting is subjected to bending deformations in two planes and moves within the bearings’ clearance.
![Page 63: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/63.jpg)
Shaft whirling vibration motions
Red Green Blue Pink
The shaft motion orbits measured ABS within the aft stern tube bearing.
![Page 64: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/64.jpg)
Bearing structure train
• lubricating film;• bearing bush;• bearing case;• bearing stool;• hull structure.
![Page 65: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/65.jpg)
The way to model bearing structure train
Dynamic stiffness coefficients of the shaft support as well as damping coefficients are frequency dependent:
( )
yy yz y y
zy zz z z
by z
y z
k k k k
k k k kK
k k k k
k k k k
( )
yy yz y y
zy zz z z
by z
y z
c c c c
c c c cC
c c c c
c c c c
Each matrix’s element consists of two components: lubricating film component and structural component. The main problem is a determination each of these components.
![Page 66: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/66.jpg)
Static and dynamic structural bearing stiffness
Excitation Point Excitation direction
Static stiffness[MN/m]
Dynamic stiff ness Excitation
frequency: 7 Hz [MN/m]
Dynamic stiff ness Excitation
fre quency: 10.5 Hz [MN/m]
Aft end of stern tube bearing
horizontal 850 2300 930
Intermediate bearing horizontal 970 4700 1800Fore engine main bearing
horizontal 4300 7300 3000
Aft end of stern tubebearing
vertical 910 470 1700
Intermediate bearing vertical 1500 870 3600Fore engine main bearing
vertical 3800 4100 4600
Calculated by L. Murawski for chemical tanker (40000 DWT, 180 m length),
![Page 67: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/67.jpg)
Mega-yacht shaft whirling vibration
www.technofysica.nl
The stiffness of bearing support structural component was not agreed with a shaftingdynamic parameters
![Page 68: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/68.jpg)
Lubricating film stiffness and damping
Revolutions
[rpm]
Dynamic stiffness
[MN/m]
Damping
[MNs/m]
30.0 69500 2900
50.0 31000 9500
76.0 25000 538
86.0 24600 471
95.0 24100 419
Lubricating film stiffness is much higher then those for the structural components.
Calculated by L. Murawski
![Page 69: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/69.jpg)
General algorithm of bearing lubricating film stiffness and damping calculation
For the current positions of the bearing defined by shaft alignment calculation the Reynolds’ equation:
3 30 0 00 0
( )6
p p hh h R
R R x x R
has to be solved in iterations to find the solution: function, integrals of which satisfy to shaft system static requirements:
( , )siny
F
R p x dF ( , ) cosz
F
R p x dF
R
0 ( , )h x ,
,x
– shaft radius;– gap thickness between shaft and bearing bush;– lubricant’s density and dynamic viscosity; – shaft angular speed;– shaft surface point coordinates
After the equilibrium solution is found additional dynamic lubrication pressure has to be calculated from the following Reynolds’ equation:
3 3 2 20 0* *
2 20 0
6 cos 3 sin 3 sin
6 sin 3 cos 3 sin
12 sin 12 cos ,
y
z
y z
p pp ph h h h u
R R x x R R x x
p ph h u
R R x x
u u
0 ( , )p x ,y zu u
,y zu u
– lubrication pressure for non vibrating shaft;
– vibration motions;
– vibration velocities;
0 ( , )p x
![Page 70: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/70.jpg)
General algorithm of bearing lubricating film stiffness and damping calculation
Finally dynamic stiffness and damping have to be calculated as the components of dynamic loads:
**( , )siny yy y yz z yy y yz z
F
R p x dF k u k u c u c u
**( , ) cosz zy y zz z zy y zz z
F
R p x dF k u k u c u c u
As can be seen from calculation algorithm, dynamic stiffness and damping coefficients are dependent on bearing shaft alignment parameters. In the case of harmonic excitation dynamic stiffness and damping are to be calculated for each frequency.
![Page 71: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/71.jpg)
Propeller damping
Schwanecke’s formulas derived from unsteady propeller theory calculations:
22
0
0.1536 eF
AD Pc
D A
224
0
0.1128 eM
AD Pc
Z D A
propeller damping coefficients for linear and angular motions
Propeller damping is significant but its influence of the whirling vibration parameters is not as decisive as in torsional vibration case. Propeller is installed in the immediate proximity of the support (aft stern tube bearing) where the motions amplitudes are not considerable.
![Page 72: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/72.jpg)
Whirling vibration parameters as a shaft alignment criteria
![Page 73: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/73.jpg)
Whirling vibration parameters as a shaft alignment criteria
Two screw ship “Rotterdam” has two identical geared installations. Port side shaft line of the ship was run smoothly while the star board shaftline generated the violent vibration.
![Page 74: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/74.jpg)
“Rotterdam” ship alignmentThe measurements performed Machine Support Company by revealed that the shaft lines are aligned differently:
Alignment of the port side shaftline (non vibrating)
Alignment of the star board shaftline (vibrating)
After starboard shaftline was realigned in the same manner as the port side shaftline, harmful vibration disappeared.
![Page 75: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/75.jpg)
Motor and pump misalignment
To work perfect short and rigid motor and pump shafts must be aligned geometrically before mating
![Page 76: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/76.jpg)
Ship shafts misalignment
Propulsion system shafts are always misaligned in the “motor-pump sense”
Shaft flexibility compensates to some extent the misalignment and vibration does not arise
![Page 77: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/77.jpg)
What is a propulsion train shaft alignment?
To align the propulsion train means to find bearings’ space positionsfor which all formulated alignment acceptance criteria are satisfied.
Bearing positions are specified bythe linear and angular offsets:
, , ,x yW W
Currently whirling vibration criterionis not included in shaft alignmentcriteria list! But…
![Page 78: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/78.jpg)
Shaft alignment and shaft whirling vibration are interconnected
Beam spans for vibration calculation purpose are measured between the reaction points. These points are migrating depending on bearings’ positions.
Shaft alignment influences the natural vibration frequencies!
![Page 79: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/79.jpg)
Lubrication pressure distributions
Lubrication pressure distribution and lubricating film properties depends on shaft alignment parameters (bearings positions).
Shaft alignment influences the lubricating film dynamic properties!
![Page 80: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/80.jpg)
Whirling vibration criteria for shaft alignment
• The critical speeds of whirling vibration are not to be in immediate vicinity of shaft nominal speed.
• The sum of the static load and additional dynamic load from whirling vibration shall not exceed the permissible value.
• Bearings are to be reliably loaded. The difference of the static load and additional dynamic load from whirling vibration shall not to be near zero or negative.
If the whirling vibration criteria are not satisfied the shaft alignment must be redesigned.
![Page 81: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/81.jpg)
Conclusions
• Classification Societies require free whirling vibration calculation only. It is quite reasonably because the uncertainties of the excitation loads, dynamic stiffness and damping coefficients make impossible a rigorous prediction of whirling vibration parameters at present.
• Forced whirling vibration calculations, if they are undertaken, should be performed as parametric calculations.
• Propulsion system whirling vibration calculation is in need of further studies and developments.
![Page 82: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/82.jpg)
Recommendations for prevention of the excessive whirling vibration
• Avoid having a long distance between the bearings.
• A bearing placed at the vibration node does not reduce the whirling vibration displacements.
• Too flexible bearings and bearing supports promote whirling vibration
• Couplings should be near a bearing, e.g. a tooth coupling has no bending stiffness.
• Large masses at the shaft free ends are critical. The length of the propeller shaft to the aft of the aft stern tube bearing should be controlled.
![Page 83: Lateral Vibration Prediction Issues Yuriy Batrak](https://reader033.fdocuments.in/reader033/viewer/2022052123/547feeb7b4af9fc9158b5c0c/html5/thumbnails/83.jpg)
Thank you for your attention!
www.shaftdesigner.com