Laserable and Rotary Materials...
Transcript of Laserable and Rotary Materials...
Materials CatalogueLaserable and Rotary
Trotec offers a wide variety of materials to choose from providing unlimited potential for your business.
4
Lase
rabl
e M
ater
ials
TroLase
TroLase is an UV-resistant acrylic based laminate for both indoor and outdoor applications.
The thin top layer makes detailed engraving possible at high production speeds. Processing creates less residue than with other materials, which reduces the need for cleaning and minimizes processing times.
• Interior Signs• Exterior Signs• Badges• Trophy Plates• Safety Signs
Typical Use
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: Micro-surfaced impact acrylic, 2 ply / 3 plyFinish: matte non-glare, glossThickness: 1/32” / 1/16” / 1/8”Engraving depth: 0.003”Cutting method: laser, saw, shear**Sheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Laser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
**Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.Note: A “G” at the end of each code means “Gloss”
Best Sellers
Red/White1/32“
1/32“
1/32“ 1/32“1/16“
1/16“1/32“1/16“1/8“
1/16“
1/16“
1/16“
1/16“1/8“
1/16“
1/8“1/16“
1/8“1/16“
1/8“
1/8“Yellow/Black Bright Green/White
Black/White
Smoke Grey/White
Blue/White
1/32“ 1/32“1/16“ 1/16“ 1/16“1/8“ 1/8“
1/16“
White/Sky BlueWhite/Red White/Black
L704-203 L704-206 L704-209L704-206G
L602-203 L602-206 L602-209L602-206G
L512-203 L512-206 L512-209L512-206G
L206-203 L206-206 L206-209
L204-203 L204-206 L204-209L204-206G
L402-203 L402-206 L402-209L402-206GL402-209G
L312-206
L205-206
L932-203 L932-206 L932-209
5
TroLase
Laserable Materials
1/16“1/32“ 1/16“
1/16“
1/16“
1/16“
1/16“
1/8“
1/8“
1/8“
1/8“
Sapphire/White Light Blue/White
Purple/White
1/32“
1/16“1/8“
1/16“
1/32“1/16“
1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/16“Yellow/Red
1/8“
Burgundy/White
Orange/White
Celadon Green/White
Evergreen/White
Gloss Black/White
Matte Black/Silver
1/16“
1/16“
1/16“
1/16“
1/2“
Navy Blue/White
Pink/White
Navy Blue/Gold
Red/Gold
Pine Green/Gold
1/16“Almond/Black
1/16“
1/16“
1/16“
1/16“
Dark Brown/White
Walnut/White
Dark Walnut/White
Light Grey/White
Matte Black/Gold
Gloss Black/Gold
1/16“
1/16“
L972-206
L912-203 L912-206 L912-209
L427-206
L417-206
L422-206
L413-206
L842-206
L192-206
L002-206
L322-206
L854-206
L582-206L582-206G
L552-206
L662-206
L557-206
L617-206
L917-206
L706-206
L612-203 L612-206
L622-206 L502-203 L502-206
L562-206
L402-206L402-209
L512-206L512-209
L602-206L602-209
L704-206L704-209
L204-206L204-209
Black/White/ Black
Blue/White/ Blue
Red/White/ Red
Yellow/Black/Yellow
White/Black/ White
Red/Black
Pink/Black
1/16“
1/16“
L604-206
L664-206
1/16“Medium Brown/White
L822-206
Pine Green/White
1/8“
1/32“1/16“
L912-203 L912-206 L912-209
Bright Green/White
1/8“
1/32“1/16“
L932-203 L932-206 L932-209L932-206G1/16“
1/16“Verde Green/Gold
L937-206
6
TroLase Metallic, Plus and Scratch Resistant (SR)
Lase
rabl
e M
ater
ials
TroLase Metallic is an acrylic based laminate with an authentic metallic finish. The thin surface layer allowsdetailed engraving at high production speeds. TroLase Metallic Plus features a special surface coating that makes the material UV-resistant and suitable for outdoor use.The SR materials include a clear top coat which adds protec-tion against scratches, scuffing and fingerprints.
• Interior Signs• Exterior Signs (Metallic Plus)• Badges• Trophy Plates• Safety Signs
Typical Use
TroLase Metallic Plus FeaturesMaterial: Modified impact acrylic, 2 plyFinish: brushed metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*Sheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Laser material
TroLase Metallic & Metallic SR FeaturesMaterial: Micro-surfaced impact acrylic, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: laser, saw, shear*Sheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Laser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
*Recommended for rough cutting prior to finishing. Edge quality with shear may not be acceptable for all applications.
7
TroLase Metallic Plus
TroLase Metallic
Laserable Materials
Brushed Stainless Steel/Black
Brushed Stainless Steel/Blue
Brushed Stainless Steel/Red
Brushed Bright Nickel/Black
Brushed Antique Gold/Black
Brushed Copper/Black1/32“
1/32“ 1/32“ 1/32“
1/32“ 1/32“1/16“
1/16“ 1/16“ 1/16“
1/16“ 1/16“1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“
Smooth Gold/Black
Brushed Gold/Black
European Gold/Black
Brushed Aluminum/Black
Brushed Silver/Black
Smooth Silver/Black
Brushed Copper/Black
Brushed Deep Bronze/Black1/32“
1/32“
1/32“
1/32“
1/32“
1/32“1/16“1/8“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“1/32“
1/16“
1/8“
1/8“
1/8“
1/8“
1/8“
LMT+314-203 LMT+314-206 LMT+314-209
LMT+364-203 LMT+364-206 LMT+364-209
LMT+315-203 LMT+315-206 LMT+315-209
LMT+764-203 LMT+764-206 LMT+764-209
LMT+864-203 LMT+864-206 LMT+864-209
LMT+316-203 LMT+316-206 LMT+316-209
LMT714-203 LMT714-206 LMT714-209
LMT734-203 LMT734-206 LMT734-209
LMT754-203 LMT754-206LMT754-209
LMT354-203 LMT354-206 LMT354-209
LMT334-203 LMT334-206 LMT334-209
LMT344-203 LMT344-206 LMT344-209
LMT894-203 LMT894-206
LMT884-206
Brushed Silver/Black1/16“
Smooth Gold/Black
Brushed Copper/Black
1/16“
1/32“
LMT334-206SR
LMT714-206SR
LMT894-206SR
1/16“ LMT344-206SR 1/8“ LMT344-209SR
1/32“1/16“1/8“
LMT354-203SRLMT354-206SRLMT354-209SR
Brushed Gold/Black1/16“ LMT734-206SR
European Gold/Black1/16“ LMT754-206SR
Brushed Brass/Black1/16“ LMT764-206SR
TroLase Metallic SR
Chrome/Black1/16“ LMT324-206
Smooth Silver/Black Brushed Aluminum/Black
8
TroLase Reverse
Lase
rabl
e M
ater
ials
TroLase Reverse consists of transparent acrylic with a coloured coating on the back. By mirror engraving the image into the back, the coloured layer is removed during the engraving process and the material becomes transparent in these places. By using acrylic paint to inlay the engraved back, a coloured engraving is created. The smooth surface allows for easy cleaning.
• Interior Signs• Exterior Signs• Badges• Safety Signs• Information Signs
Typical Use
Material featuresMaterial: Micro-surfaced impact acrylic with back-coating, 2 plyFinish: matte non-glare, glossThickness: 1/16”, 1/8” Engraving depth: 0.003” Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Laser material
Exterior use
Reverse
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Our Reverse products are very special as we have added the Light Blocker layer – a great feature as it eliminates the shadows from the colour fill at the back.
9
Laserable Materials
Matte Clear/Red
Matte Clear/Burgundy
Matte Clear/Blue
Matte Clear/Sapphire
Matte Clear/Pine Green
Matte/Dark Brown
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
Matte Clear/White
Matte Clear/Grey
Matte Clear/Black
Matte Clear/Gold
Gloss Clear/Gold Matte Clear/Silver
1/16“
1/16“
1/16“
1/16“
1/16“ 1/16“
Gloss Clear/Silver
Matte Clear/Yellow
1/16“
1/16“
LR601-206
LR201-206LR201-209
LR621-206
LR311-206LR701-206
LR511-206
LR401-206LR401-209
LR561-206 LR711-206
LR710-206 LR341-206LR341-209
LR340-206LR340-209
LR911-206
LR841-206
Matte Clear/Ivory1/16“ LR221-206
TroLase Reverse
1/8“
1/8“
1/8“
Matte Clear/Aluminum1/16“ LR351-206
Matte Clear/Green1/16“ LR931-206
1/8“
Gloss Clear/Black1/16“ LR400-206
Matte Clear/Navy Blue1/16“ LR551-206
Matte Clear/Parchment
Matte Clear/Celadon
1/16“
1/16“
LR811-206
LR971-206
Matte Clear/Blueberry1/16“ LR541-206
Tips
10
LaserFlex
Lase
rabl
e M
ater
ials
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
LaserFlex is a transfer film for customizing textiles. The laser can reproduce even the finest details with intricate designs. Once the artwork has been engraved or cut out on the laser unit, the design is applied to the textiles using a transfer press. LaserFlex is characterized by good opacity and high elasticity.
• Customization of T-shirts and fabric bags• Recommended for cotton, polyester, blend-ed fabrics• Less suitable for nylon and coated textiles• Flex on flex is possible for multi colour designs
Typical Use
Material featuresMaterial: Polyurethane on transfer paperSurface: matteThickness: 0.004” Engraving depth: 0.004” Cutting method: laser, shear, scissorsSheet Size: 16.5” x 11.75”
Laser material
Reverse
White
Red
Green
Yellow
Blue
Black
Orange
Navy Blue
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
623SFR 236 623SFR 238 623SFR 241
623SFR 239 623SFR 240 623SFR 243
623SFR 242 623SFR 237
LaserFlex has been specially designed to not only be cut but also to be weeded by laser. This means that it is no longer necessary to mechanically remove excess material between graphics and letters or along edges.
Recommended transfer conditions:Temperature: 165 °CDuration: 17 seconds
LaserFlex film can be washed at up to 60 °C. Any residues can be removed by washing.
Sample Kit0.004“ 623SPK 054
11
Laserable Materials
TroLase Lights
TroLase Lights are highly flexible and robust films with adhesive coating on the back, which can be laser engraved. The self-adhesive film adheres perfectly to various materials such as metals, plastic, rubber, and wood and makes it a popular material in industrial and recognition applications.
• Exterior & Interior Signs• Badges• Trophy Plates• Vinyl Lettering• Labels / Stickers• Labelling of packages
Typical Use
Material featuresMaterial: Micro-surfaced 2 ply plastic, with adhesiveFinish: gloss, brushed metalThickness: 0.004” Engraving depth: 0.001” Cutting method: laser, shearSheet Size: 12” x 24”
Engraving material
Interior use
Exterior use
Laser material
Black/White
White/BlackBrushed Silver/Black
Brushed Brass/Black
Black/Gold
Yellow/Black
Brushed Bronze/Black
Smooth Silver/Black
Smooth Gold/Black
Black/Silver
0.004“
0.004“0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
0.004“
LL61-201
LL62-201LL63-201
LL64-201
LL65-201
LL68-201
LL69-201
LL73-201
LL74-201
LL75-201Red/White0.004“ LL60-201
Brushed Copper/Black0.004“ LL89-201
12
Digital Print Series
Lase
rabl
e M
ater
ials
Trotec offers engravable plastic sheet products that are also print receptive. Trotec Digital Print Series line is developed and designed for printing with UV & LED Curing Inks. The surface is pre-treated for superior ink adhesion. The core material is made of impact modified acrylic which makes it the perfect product for a combination of printing, laser engraving and laser cutting.
• Interior signage• Personal identification• Point of Sale displays• Decorative signs
Applications
Material FeaturesMaterial: Impact modified acrylic, 1 ply / 2 plypre-treated for superior ink adhesionFinish: matte and gloss colours, mirrored, radiant and brushed metalThickness: 1/16”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Laser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Tips
Metallic finishes enhance your graphics and give them an authentic, brilliant metal look.
13
Digital Print Series
Laserable Materials
Products are also available on ABS or polystyrene cores and in other gauges on request. Minimum order quantities may apply.
Gloss White/Blue1/16“ 107955
Gloss White/Red1/16“ 107954
Gloss White/Black1/16“ 107953
Gloss White1/16“ 107952
Matte Red/White1/16“ 108372
Matte Black/White1/16“ 108371
Matte White/Blue1/16“ 107958
Matte White/Red1/16“ 107957
Matte White/BLack1/16“ 107956
Matte White1/16“ 108216
Mirror Silver/Black1/16“ 117422
Mirror Gold/Black1/16“ 117421
Matte Brush Aluminum/Black
1/16“ 107960
Matte SatinBrass/Black
1/16“ 107959
Radiant Gold/Black1/16“ 109073
Radiant Silver/Black1/16“ 109072
14
TroLase ADA Signage
Lase
rabl
e M
ater
ials
TroLase ADA Signage is a single-layer, dyed, acrylic based ma-terial. It is ideal for functional signage in indoor and outdoor areas, for cutting out letters or for creating 3-dimensional signs by mounting cut-out shapes on a base plate. In addition, it is an ideal material for signs featuring Braille.
• Exterior & Interior Signs• ADA Compliant• 3-dimensonal Signs• Model making• Letters & Symbols
Typical Use
Material featuresMaterial: Single-ply modified acrylicSurface: matteThickness: 1/32” / 1/16” / 1/8” / 0.04”Cutting method: laser, saw, shear, rotary engraverSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Laser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
For Braille Accessories see page 61
Best Sellers
Tips
15
TroLase ADA Signage
Laserable Materials
Yellow
White
Bright White
Light Grey
Charcoal GreyClear
Black
Silver
1/32“
1/32“
1/32“1/32“
1/32“
1/16“
1/16“
1/16“
1/16“
1/16“1/16“
1/16“1/32“
1/32“
1/32“
1/8“
1/8“
LS701-103 LS701-106
LS201-103 LS201-106LS201-104
LS204-103 LS204-106 LS204-109LS204-104
LS305-103 LS305-106
LS307-103LS307-106LS307-109
LS101-103 LS101-106LS101-109
LS401-103 LS401-106 LS401-109LS401-103ADH
LS304-103
Red
Burgundy
Green
Blue
Marine Blue
1/32“
1/32“
1/32“
1/32“1/16“
1/16“
1/16“
1/16“
1/8“ 1/8“
LS601-103 LS601-106 LS601-109
LS602-103LS602-106LS602-109
LS901-103 LS901-106
LS501-103 LS501-106 LS501-109
LS502-106
Order TroLase ADA Signage with self-adhesive film applied to the back. This allows you to easily mount letters cut-out from the material plate on base plates or walls. During assembly use the cut material plate as a template for spacing and as a line level. A few tips for best results: - Materials must be even and without bends or distortions.- A cutting grate should always be used when cutting plastics, in order to lift the material.- Remove the protective film, in order to prevent discolouration or excessive smoke.- If excess smoke results, then too much energy is being used. In this case increase the speed.
1/8“1/8“
1/32“
1/16“1/8“
Dark Brown1/32“1/16“
LS803-103LS803-106
0.04“
0.04“
16
TroLase ThinsLa
sera
ble
Mat
eria
ls
TroLase Thins are thinner and more flexible than traditioal engraving materials. As a result, it is particularly suited to applications on curved surfaces. The thin surface coating allows detailed engraving at high production speeds. The acrylic based material is available in matte colours as well as shiny and brushed metal finishes.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Bottle Labels• Business Cards
Typical Use
This material is very often used with a magnetic film applied to the back. To see more information about magnetic films, please turn to page 50.
Material features Material: Micro-surfaced 2 ply plastic, with or without adhesiveFinish: matte non-glare, gloss, brushed metalThickness: 0.02” Engraving depth: 0.003” Cutting method: laser, saw, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Laser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Best Sellers
17
TroLase ThinsLaserable M
aterialsBlack/White
Brushed Gold/Black Brushed Aluminum/Black
Brushed Copper/Black
White/Black
Europ. Brushed Gold/ Black
0.02“
0.02“
0.02“ 0.02“
0.02“0.02“
LT402-202
LT734-202
LT754-202 LT894-202
LT204-202LT354-202
Red/White
Purple/White
White single ply
Celestial Blue./Gold Port Wine/Gold
Yellow/Black
Blue/White
0.02“
0.02“
0.02“
0.02“ 0.02“
0.02“
0.02“
LT602-202
LT582-202
LT202-102
LT577-202 LT677-202
LT744-202
LT512-202
Brushed Bronze/Black
Deep Bronze/ Black
Matte Black/Gold
Gloss Black/ Gold
Brushed Silver/Black
Matte Black/Silver
Black single ply
Gloss Black/ Silver
Trophy Silver/ Black
Smooth Silver/Black
Trophy Gold/ Black
0.02“
0.02“
0.02“
0.02“
0.02“
0.02“
0.02“
0.02“ 0.02“
0.02“
0.02“
LT794-202
LT874-202
LT884-202
LT334-202
LT394-202
LT344-202
LT417-202
LT427-202 LT413-202
LT404-102
LT423-202
Add “-ADH“ to part number when ordering for adhesive backing.
Smooth Gold/Black0.02“ LT714-202
Verde/Gold0.02“ LT937-202
18
TroLase Textures
Lase
rabl
e M
ater
ials
TroLase Textures are two-layer acrylic based materials, suitable for applications in demanding environments, where extra durability and scratch resistance are required. The textured, matte surface is non-reflective, durable and easy to clean. TroLase Textures are UV- and weather-resistant, suitable for indoor and outdoor use.
• Exterior & Interior Signs• Badges• Safety Signs• Control Panels• Industrial Applications
Typical Use
Material featuresMaterial: Co-extruded impact acrylic 2 plyFinish: textured matteThickness: 1/16” / 1/8” Engraving depth: 0.005”, 0.007” Cutting method: laser, saw, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
19
Laserable Materials
Red/White
Yellow/Black
Green/White
1/16“
1/16“
1/16“
1/8“
Sapphire/White
Royal Blue/White
1/16“
1/16“1/8“
White/Red Winter White/Blue Winter White/Black
Ash Grey/Black
Black/White
1/16“ 1/16“ 1/16“
1/16“
1/16“
1/8“
1/8“LTX642-206 LTX642-209
LTX592-206 LTS592-209
LTX244-206 LTX244-209
LTX503-206
LTX205-206
LTX374-206
LTX422-206 LTX422-209
LTX246-206
LTX774-206
LTX962-206Ash Grey/White
1/16“ LTX302-206
Ruby/White1/16“ LTX622-206
Yellow/Dark Brown1/16“ LTX778-206
Teal/White1/16“ LTX992-206
20
ArmorCoreLa
sera
ble
Mat
eria
ls
ArmorCore is a laserable plastic that combines the ease of use of TroLase with the UV stability and durability of an acrylic cap. The satin finish also allows laser users to reproduce old signs created with traditional non-laserable satin plastic.
• Exterior & Interior Signs• Badges• Safety Signs• Control Panels• Industrial Applications
Typical Use
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Material featuresMaterial: Impact acrylic 2 plyFinish: matte or brushedThickness: 1/16” Engraving depth: 0.005” Cutting method: laser, saw, shear
Engraving material
Interior use
Outdoor UseLaser material
White/Black1/16“1/16“
204-227M204-227S
White/Blue1/16“ 205-227M
205-227S1/16“
White/Red1/16“ 206-227M
206-227S1/16“
Grey/White1/16“ 312-227M
Red/White1/16“1/16“
Blue/White1/16“1/16“
Black/White1/16“1/16“
602-227M602-227S
512-227M512-227S
402-227M402-227S
Orange/Black1/16“ 614-227M
Yellow/Black1/16“1/16“
704-227M704-227S
Green/WhitePine Green/White 1/16“
1/16“ 1/16“932-227M932-227S912-227M
21
Laserable Materials
Smart-X Laserable Foam Board
Smart-X is the new print product that provides outstanding
possibilities in the field of visual communications. Smart-X is a
lightweight, all-plastic sheet material with UV and weather
resistant solid polystyrene (HIPS) surface and a core of
expanded polystyrene that is completely moisture-resistant.
• Life-sized fashion Displays
• Lare-format or long and narrow signs
• Self-supporting, free standing structures
• Decoration
• Lettering
• Screen printing
• Shop design/ Shop fitting
Typical Use
Material FeaturesMaterial: Lightweight foam board, 1 ply
Finish: matt
Thickness: 5,0 mm (0.2“), 10,0 mm (0.4“)
Cutting method: laser, saw
Sheet sizes: 47.8“ x 23.8“ (full sheet), 23.8“ x 23.8“ (half sheet), 23.8“ x 11.8“ (quarter sheet)
Rotary material
Interior use
Exterior use
UV PrintLaser material
5 10
White White129013 129014
mm mm
Tips
Smart-X is the world’s only lightweight foam board for external applications without any significant
change in color for a period of up to two years. The following properties make this product unique:
• Outstanding printability for direct-to-substrate digital printing
• Excellent laser cutting properties
• Temperature resistance from -10°C up to +70°C
• Very good weather resistance - UV stability and moisture-resistance; no warping
• Very good recycling properties thanks to homogeneous material composite - 100% recyclable
22
TroGlass Colour Gloss
Acr
ylic
s
This cast acrylic glass is available in a wide range of Colours, in variations of transparent, fluorescent, translucent and non-transparent. Both material sides have a glossy finish. The transparent, fluorescent and translucent Colours offer constant light transmission superior to similar glass Colours.
TroGlass Colour Gloss features all advantages of cast acrylic, especially in terms of impact resistance, light diffusion and handling capabilities.
• Illumination and lighting• Visual co unication – Signage, Display,
POP• Shop fitting• Interior design and furnishing
Typical Use
Material featuresMaterial: cast acrylicFinish: glossTranslucency: transparent, fluorescent, translucent, non-transparentThickness: 1/8”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Tips• Perfect light transmission with up to 92% in clear version - better than that of glass• Impact resistance 8 to 10 times higher than glass• Elegant polished finish when laser cut• High resistance to external agents and UV rays• UV-stable and weatherproof• Easy to work with (laser cut/engrave, bend, glue, thermoforming, milling)
23
Acrylics
TroGlass Colour Gloss
Glass Look
Yellow transparent
Orange transparent
Yellow fluorescent
White translucent
Yellow translucent
Orange translucent
Red translucentCarmine Red translucent
Fuchsia translucent
Orange fluorescent
Red transparent
Green transparent
Dark Green transparent
Red fluorescent
Green translucent
Dark Green translucent
Sky Blue translucent
Blue translucent
Lilac translucent
Green fluorescent
Ice Blue transparent
Blue transparent
Ice Blue fluorescent
White
Grey
Black
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“ 1/8“
1/8“
1/8“
1/8“1/8“
1/8“
1/8“
1/8“
1/8“
1/8“ 1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
117129
117130
117134
117069
117071
117103
117104 117142
117105
117135
117131117143
117139
117140
117136
117123
117124 117125
117126
117141
117137
117132
117133
117138
117070
117127
117128
fluorescent
opal
transparent
Metallic
Metallic Gold
Metallic bright sliver
Metallic Silver
Metallic anthracite-silver
1/8“
1/8“
1/8“
1/8“
129875
129878
129877
129879
24
TroGlass Frosted and LED
Acr
ylic
s
TroGlass Frosted is a heavy-duty cast acrylic glass with a matt, roughly structured surface on both sides (“sandblasted finish”). The frosted surface, combined with the intrinsic hardness of cast acrylic, allows applications where higher material strength and robustness are required. TroGlass LED is a cast acrylic glass, optimized to LED light waves. This allows high light transmission and strong light diffusion while “spot effects”, typical of LED lights, are eliminated.
• Signs• Illumination and backlighted signs• Visual co unication – Signage
Display, POP• Shop fitting• Interior design and furnishing
Typical Use
Material features TroGlass FrostedMaterial: cast acrylicFinish: matt, sandblasted texturesTranslucency: translucentThickness: 1/8”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
TroGlass LED TipsTroGlass LED is an optimized cast acrylic sheet, developed to adjust itself to the particularity of LED lighting:• Colours are formulated to meet the wavelength of LEDs: the sheets maintain the same colour tone withbacklights being turned on and off.• It allows a high light transmission. The strong diffusion characteristics eliminate spot effects.
Material features TroGlass LEDMaterial: cast acrylicFinish: glossTranslucency: translucentThickness: 1/8”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
25
Acrylics
TroGlass Frosted
White Light Pink Ice Blue
Light Yellow Fuchsia Lilac
Orange Mint Green Blue
Red Green
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“
117207 117190 117187
117205 117191 117204
117203 117206 117188
117202 117189
TroGlass LED
White matte Orange Green
White Red Blue
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
117208 117210 117212
117209 117211 117213
26
TroGlass Satins and DuoA
cryl
ics
TroGlass Satins cast acrylic glass is available in a wide range of colours, in variations of transparent, translucent and non-transparent. Both sheet sides have a satin surface that give an elegant and soft feeling and appearance. TroGlass Duo is a cast acrylic glass with one matt and one glossy side. The Night and Day colour variation allows for a change in colour when backlighted. While being black when not backlighted, the colour turns bright with the backlight turned on.
• Illumination and backlighted signs• Visual communication – Signage, Display,
POP• Shop fitting• Interior design and furnishing
Typical Use
Material features TroGlass SatinsMaterial: cast acrylicFinish: mattTranslucency: translucent, non-transparentThickness: 1/8”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
TipsSpecial Product TroGlass Duo Night & Day: allows the creation of sophisticated signs, giving the possibility of having 2 colours in the same product:• black when not backlighted• bright when the sign is backlighted
Material features TroGlass DuoMaterial: cast acrylicFinish: one side matt, one side glossyTranslucency: translucentThickness: 1/8”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
27
Acrylics
TroGlass Satins
White Black
Bright Orange translucent Violet translucent
Lemon Green translucent
Orange translucent Fuchsia translucent Aquamarine translucent
Yellow translucent Light Pink translucent Blue translucent
Clear Red translucent Ice Blue translucent
1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/8“ 1/8“ 1/8“
117055 117059
117054 117041 117057
117036 117068 117035
117052 117037 117040
117034 117038 117039
TroGlass Duo
Night and Day
Black
Clear
White
1/8“
1/8“
1/8“
1/8“
117147
117148
117144
117145
28
TroGlass ReverseA
cryl
ics
TroGlass Reverse is a transparent, cast gloss acrylic with a coloured coating on the reverse side. By reverse engraving the back and infilling the engraved areas with colour or backlighting, an elegant finish can be created. A third layer of Black backing significantly reduces the cleaning time and enhances the depth of colour.
• Interior Signs• Exterior Signs• Safety Signs• Promotional & Display Signage
Typical Use
Material featuresMaterial: Micro-surfaced impact acrylic with back-coating, 2 plyFinish: glossEngraving depth: 0.004”Thickness: 1/8”, 1/5”Cutting method: laser, sawSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Outdoor UseLaser material
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Gloss/White
Gloss/Green
Gloss/Light Blue
Gloss/Gold
Gloss/Red
Gloss/Black
Gloss/Burgundy Gloss/Blue
Gloss/Silver
Gloss/Bronze Gold
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“ 1/8“
1/8“
1/8“
1/5“
1/5“
1/5“
1/5“
1/5“
1/5“
1/5“ 1/5“
1/5“
1/5“
TG4-200
TG5-200
TG4-600
TG5-600
TG4-500
TG5-500
TG4-931
TG5-931
TG4-510
TG5-510
TG4-400
TG5-400
TG4-620
TG5-620
TG4-330
TG5-330
TG4-700
TG5-700
TG4-710
TG5-710
20625
20632
20630
20636
20629
20635
65005
65008
119381
119393
20628
20634
119379
119380
20627
20633
119375
119377
20631
20637
Reverse
29
Acrylics
TroGlass Clear
TroGlass Clear sheets are a great alternative to glass as they offer perfect optical clarity. At the same time they provide the physical benefits of acrylic such as being formable, UV-stable and hard-wearing. Laser engraving produces a white or clear engraved image, depending on the chosen settings. The laser cut produces polished cutting edges and inner contours, no additional post-processing of the material is required.
• Interior Signs• Exterior Signs• Safety Signs• Promotional & Display Signage
Typical Use
Material features Material: Cast acrylic, 1 plyFinish: glossThickness: 3 mm (0.118") / 4 mm (0.158") / 5 mm (0.197") 6 mm (0.236") / 8 mm (0.315") / 10 mm (0.394") 15 mm (0.591") / 20 mm (0.787")Cutting method: laser, saw
Engraving material
Interior use
Outdoor UseLaser material
Clear
Clear
Clear
Clear
Clear
Clear
Clear
Clear
3
4
5
6
8
10
15
20
121800
121801
121862
121863
121865
121867
121868
121869
mm
mm
mm
mm
mm
mm
mm
mm
Full sheet: 23.54'' x 47.24''
1/2 sheet: 23.54'' x 23.54''
1/4 sheet: 23.54'' x 11.69''
Full sheet: 23.54'' x 47.01''
1/2 sheet: 23.54'' x 23.54''
1/4 sheet: 23.54'' x 11.63''
Full sheet: 23.54'' x 47.24''
1/2 sheet: 23.54'' x 23.54''
1/4 sheet: 23.54'' x 11.69''
Full sheet: 23.54'' x 47.24''
1/2 sheet: 23.54'' x 23.54''
1/4 sheet: 23.54'' x 11.69''
Full sheet: 23.54'' x 47.24''
1/2 sheet: 23.54'' x 23.54''
1/4 sheet: 23.54'' x 11.69''
Full sheet: 23.86'' x 47.87''
1/2 sheet: 23.86'' x 23.86''
1/4 sheet: 23.86'' x 11.85''
Full sheet: 23.86'' x 47.87''
1/2 sheet: 23.86'' x 23.86''
1/4 sheet: 23.86'' x 11.85''
Full sheet: 23.86'' x 47.87''
1/2 sheet: 23.86'' x 23.86''
1/4 sheet: 23.86'' x 11.85''
30
TroPlyRo
tary
Mat
eria
ls
TroPly features a thin surface coating, which allows for intri-cate details and fast engraving without shading effects. The reflection-free surface allows clear and easy-to-read designs to be created of the very smallest engraved images.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Information Signs
Typical Use
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: ABS, 2 plySurface: matteThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bitsSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Cut-to-size and individual services: see page 81
Best Sellers
Red/White
Yellow/Black
Blue/White
White/RedWhite/Black
Black/White1/32“
1/8“
1/8“
1/8“
1/8“
1/8“
1/32“
1/32“
1/32“
1/32“1/16“
1/16“
1/16“
1/16“ 1/16“
1/16“
P602-203 P602-206 P602-209
P744-203 P744-206 P744-209
P512-203 P512-206 P512-209
P206-206P204-203 P204-206 P204-209
P402-203 P402-206 P402-209
Not all colour & thickness combinations are stock items, please call for availability
31
TroPlyRotary M
aterials
Orange/White
Bright Green/White
Pine Green/White
Navy Blue/WhiteYellow/Red
Sapphire/White
White/Green
White/Pine Green
White/Blue
Ivory/Dark Brown
Almond/Black
Smoke Grey/White
Light Grey/Black
Walnut/Bright White
Engl. Walnut/ Bright White
Dark Walnut/White
Black/Bright White
Red/Bright White
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
1/32“
1/32“
1/32“
1/32“
1/32“
1/32“
1/32“
1/16“
1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/16“
1/16“
1/32“1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/32“1/16“
Burgundy/White
Light Grey/White
1/32“1/16“
1/16“
Blue/Bright White1/32“1/16“
Purple/White1/32“1/16“
Light Blue/White1/16“
P642-203 P642-206
P622-203 P622-206 P622-209
P612-203 P612-206
P932-203 P932-206 P932-209
P912-203 P912-206 P912-209
P552-206P706-206
P502-206 P502-207
P572-203 P572-206
P582-203 P582-206
P562-206
P172-206
P192-206
P002-206
P209-206
P269-206
P205-206 P205-209
P228-203 P228-206
P854-203 P854-206 P854-209
P312-203 P312-206 P312-209
P322-206
P324-203 P324-206
P412-203 P412-206
Black/White/Black
White/Black/White
Red/White/Red Blue/White/Blue
1/8“
1/8“
1/8“
1/8“
P402-209
P602-209
P204-209
P512-209
1/32“1/16“
Dark Brown/White1/16“
Medium Brown/WhiteP822-203 P822-206
P842-206
Light Grey/Blue1/16“ P325-206
Pink/White1/16“ P662-206
Pink/Black1/16“ P664-206
Yellow/Black/Yellow1/8“ P774-206
1/16“Celadon Green/White
P972-206
32
TroPly Metallic Plus and TroPly Metallic
Rota
ry M
ater
ials
TroPly Metallic is characterized by a precious metal look and is ideal for the finest details with clear contrast as well as fast and cost-efficient processing.TroPly Metallic Plus features a special protective layer, which is particularly resistant to scratches and wear.
• Interior Signs• Badges• Trophy Plates• Safety Signs• Information Signs
Typical Use
TroPly Metallic Plus Features
TroPly Metallic Features
Material: ABS, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bitsSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Material: ABS, 2 plyFinish: brushed or matte metalThickness: 1/32” / 1/16” / 1/8” Engraving depth: 0.003” Cutting method: saw, cutting bitsSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Engraving material
Interior use
Interior use
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
33
Rotary Materials
TroPly Metallic Plus
Brushed Aluminum/Black
Brushed Silver/Black Deep Bronze/Black
European Gold/Black
Brushed Gold/Black
Brushed Brass/Black
Smooth Silver/Black
Smooth Gold/Black1/16“
1/16“ 1/16“
1/16“
1/8“1/16“
1/16“
1/16“
1/16“1/8“
1/8“
1/8“
PMT+734-206 PMT+734-209
PMT+334-206 PMT+884-206
PMT+754-206 PMT+754-209
PMT+764-206
PMT+344-206PMT+344-209
PMT+714-206 PMT+714-209
PMT+354-206 PMT+354-209
TroPly MetallicDeep Bronze/ Black
European Gold/Black
1/32“
1/32“
1/8“1/16“1/16“
1/16“
Brushed Silver/Black
Brushed Copper/Black
Smooth Gold/Black
1/32“1/32“
1/32“
1/8“
1/8“
1/16“1/16“
1/16“
Silver/Black
Brushed Gold/Black1/32“
1/32“
1/8“
1/8“
1/16“
1/16“
Brushed Aluminum/Black
PMT884-206
PMT894-203 PMT894-206
PMT344-203 PMT344-206 PMT344-209
PMT334-203 PMT334-206 PMT334-209
PMT354-203 PMT354-206 PMT354-209
PMT714-203 PMT714-206 PMT714-209
PMT754-203 PMT754-206
PMT734-203 PMT734-206 PMT734-209
1/16“1/16“Brushed Silver/BlueBrushed Gold/Blue
PMT325-206PMT725-206
Brushed Bronze/White1/16“ PMT872-206
1/8“
1/16“Brushed Aluminum/Blue
PMT+355-206
Brushed Copper/Black1/16“ PMT+894-206
Brushed Bronze/White1/16“ PMT+872-206
Smooth Silver/Black1/32“ PMT344-203
PMT344-2061/16“
34
TroPly Satins
Rota
ry M
ater
ials
TroPly Satins are available in a large range of colours, in a brushed gloss finish. The solid top layer provides increased protection against scratches or abrasion. Specially designed for indoor use, where a warm appearance in combination with durability and resistance is required.
• Interior Signs• Badges• Safety Signs• Information Signs
Typical Use
Selected colours are also available in a 3-ply finish. Here, in addition to the surface and core layers there is an extra layer in the colour and thickness of the surface layer applied on the back.
Material featuresMaterial: Acrylic cap / ABS core, 2 plyFinish: brushed glossThickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.012“Cutting method: saw, cutting bits, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
35
TroPly Satins
Rotary Materials
Orange/White
Orange/Black
Yellow/Black
Green/White
Purple/White
Polar White/Black
White/Black
White/Red
Grey/White
Grey/Black
1/32“
1/8“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“
1/16“1/16“
Sapphire/White
White/Green
Red/Black
White/Blue
1/16“
1/16“ 1/16“Airforce Blue/White
Red/White1/16“
Black/White1/16“
PS209-206
PS402-206
PS206-206
PS204-203 PS204-206
PS234-206PS234-209
PS304-206
PS302-206PS582-206
PS532-206 PS205-206
PS512-206
PS932-206
PS704-206
PS614-206
PS612-206
PS604-206
PS602-206
Black/White/Black
White/Black/White
Yellow/Black/Yellow
White/Red/White White/Blue/White
Red/White/Red
Burgundy/White/ Burgundy Green/White/Green
Blue/White/Blue1/8“
1/16“
1/8“
1/8“ 1/8“
1/8“
1/8“
1/8“
1/8“
1/8“
PS402-209PS602-209
PS622-209
PS234-206 PS234-209
PS704-209
PS512-209
PS206-209 PS205-209
PS932-209
Best Sellers
Burgundy/White1/16“ PS622-206
36
TroPly Ultra
Rota
ry M
ater
ials
TroPly Ultra is an UV stable laminate for indoor and outdoor applications in a matte, reflection-free finish. The deeper top layer provides increased protection against damage and makes TroPly Ultra the preferred material for use in harsh environments. TroPly Ultra can also be cut with a laser.
• Exterior & Interior Signs• Badges• Safety Signs• Control Panels• Braille Signage
Typical Use
Material featuresMaterial: Laminated impact acrylic, 2 plySurface: matteThickness: 1/16” / 1/8” Engraving Depth: 0.015“Cutting method: saw, cutting bits, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Cut-to-size and individual services: see page 81 Not all colour & thickness combinations are stock items, please call for availability
Best Sellers
37
TroPly Ultra
Rotary Materials
Red/White
Vintage Gold/Black
1/16“1/8“
Blue/White1/16“1/8“
1/16“Sapphire/White
1/16“Ruby/White
Vintage Silver/Black
1/16“
1/16“1/8“
Yellow/Black
Black/White
1/16“1/8“
1/16“1/8“
Safety Yellow/ Black
1/16“1/8“
Bright Green/White1/16“1/8“
Black/Gold1/16“
White/Red1/16“1/8“
White/Blue1/16“1/8“
White/Black1/16“1/8“
PU602-206 PU602-209
PU632-206
PU704-206 PU704-209
PU794-206 PU794-209
PU932-206 PU932-209
PU204-206 PU204-209
PU205-206 PU205-209
PU206-206 PU206-209
PU562-206
PU512-206 PU512-209
PU417-206
PU402-206 PU402-209
PU384-206 PU384-209
PU774-206
Hunter Green/White1/16“ PU992-206
TroPly HiGloss
Rota
ry M
ater
ials
TroPly HiGloss is an UV-resistant laminate with a high-gloss surface suitable for indoor and outdoor use. A thick top layer provides extra protection and resistance to scratches and abrasion. The material consists of modified acrylic and is therefore suitable for laser cutting. Due to the thickness of the top layer, signs should be created with mechanical engraving devices for best results.
• Exterior & Interior Signs• Badges• Safety Signs• Information Signs• Braille Signage
Selected colours are also available in a 3-ply finish. The surface colour is applied to both sides of thecore, allowing for double sided signs.
Material featuresMaterial: Laminated impact acrylic, 2- / 3 plyFinish: glossThickness: 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
38 Cut-to-size and individual services: see page 81
Typical Use
Not all colour & thickness combinations are stock items, please call for availability
TroPly HiGloss
39
Rotary Materials
Red/White Vintage Gold/ Black1/16“
1/8“ 1/16“1/8“
Sapphire/White1/16“
Yellow/Black
Vintage-Silver/ Black
1/16“1/8“
Blueberry Blue/White1/16“
1/16“1/8“
Safety Yellow/Black Black/White1/16“1/8“
1/16“1/8“
Green/White1/16“1/8“
White/Red1/16“1/8“
Teal Green/White
Black/Gold
1/16“
White/Blue1/16“1/8“
1/16“Blue/WhiteRuby/White
Ivory/Dark Brown
1/16“1/16“
1/16“
1/8“
White/Black1/16“1/8“
PH602-206 PH602-209
PH204-206 PH204-209
PH562-206
PH774-206 PH774-209
PH704-206 PH704-209 PH542-206
PH794-206 PH794-209 PH384-206
PH384-209
PH932-206 PH932-209
PH402-206 PH402-209
PH962-206
PH206-206 PH206-209
PH417-206PH512-206 PH512-209
PH632-206
PH228-206PH205-206 PH205-209
Black/White/ Black
White/Black/ White
White/Red/ White
Red/White/ Red
Green/White/ Green
Blue/White/ Blue
1/8“
1/16“
1/8“
1/16“
1/16“
1/16“1/8“1/8“
PH402-209
PH602-206 PH602-209
PH204-206 PH204-209
PH512-206
PH206-209 PH932-206
Best Sellers
40
TroPly Ultra Reverse
Rota
ry M
ater
ials
TroPly Ultra Reverse consists of transparent acrylic with a coat-ing on the back. A transparent image is created by engraving the coloured back. This engraving can then be filled with colours. The protective transparent acrylic in combination with the relatively deep coloured layer on the back makes TroPly Ultra resistant to adverse external influences and easy to clean.
• Exterior & Interior Signs• Badges• Safety Signs• Information Signs• Braille Signage
Typical Use
Material featuresMaterial: Laminated impact acrylic, 1- / 2 plySurface: matteThickness: 1/32” / 1/16” / 1/8” Engraving Depth: 0.015“ Cutting method: saw, cutting bits, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Reverse
Cut-to-size and individual services: see page 81
Matte/Burgundy
Matte/YellowMatte/Green
Matte/Ivory
Clear single ply1/32“1/16“
1/16“
1/16“1/16“
1/16“
1/16“
1/8“
Matte/China Blue1/16“
Matte/Blueberry Blue
Matte/Black
1/8“1/16“1/16“Matte/Sapphire
Matte/Red
Matte/Vintage Silver
1/8“
1/16“
1/16“
PUR601-206
PUR631-206
PUR701-206PUR911-206
PUR231-206 PUR381-206
PUR541-206
PUR561-206PUR101-103 PUR101-106 PUR101-109
PUR401-206 PUR401-209
PUR371-206 PUR371-209
Matte/White
1/8“1/16“ PUR201-206
PUR201-209
Not all colour & thickness combinations are stock items, please call for availability
41
Rotary Materials
TroPly HiGloss Reverse
TroPly HiGloss Reverse is polished to a high gloss finish and can be marked on the back, thus creating high-quality signage products. The material is UV stable and weather-proof and therefore suitable for indoor and outdoor use. A 3D effect can be achieved by using an appropriate milling cutter. The material is ideal for backlighting.
• Interior Signs• Exterior Signs• Information Signs• Badges• Signs with advertising impact
Typical Use
Material featuresMaterial: Acrylic, 1- / 2 plyFinish: glossThickness: 1/16” / 1/8” Engraving Depth: 0.015“Cutting method: saw, cutting bits, shearSheet sizes: 48” x 24”, 24” x 24” (half ), 24” x 12” (quarter)
Engraving material
Interior use
Exterior use
Reverse
Clear/Red
Clear/Burgundy Clear/Ivory
PHR600-206PHR600-209
PHR630-209 PHR560-209 PHR230-209
1/8“
1/8“ 1/8“ 1/8“
1/16“
Clear/Sapphire
Clear/Yellow
Clear/Black
Clear/Blueberry Blue
Clear/Green Clear/ Teal Green
Clear/Blue
Clear single ply
Clear/White
PHR700-206PHR700-209
PHR540-206PHR540-209
PHR900-206PHR900-209 PHR910-209
PHR400-206PHR400-209
1/8“ 1/8“
1/8“ 1/8“ 1/8“
1/16“ 1/16“
1/16“ 1/16“
PHR510-206 PHR510-209
PHR200-206PHR200-209
PHR100-106PHR100-109
1/16“1/8“
1/8“
1/16“
1/16“
Clear/SilverPHR370-2091/8“
1/8“
42
Anodized Aluminum M
etal
s
Anodized or colour anodized aluminum is suitable both for engraving with a CO2 laser and with mechanical engraving devices. The protective anodized coating remains intact during laser processing. The image contrast is caused by the removal of the coloured coating and almost photographic qualities can be achieved. A detailed, white engraved image is created.
• Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Anodized Aluminum featuresMaterial: Anodized Aluminum, colour coating over silver aluminumFinish: matte, glossThickness: 0.02” / 0.025” / 0.04” / 0.125”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Laser material
Not all colour & thickness combinations are stock items, please call for availabilityCut-to-size and individual services: see page 81
43
Anodized AluminumM
etals
Satin Silver
Satin Gold
Satin Blue
Satin Red
0.025“
0.02“
0.02“
0.02“
9722029-19722629-19729090-19729029-1
9722030-1
9722028-1
9722032-1
Satin Black0.025“ 9722033-1
Stock size 12”x 24” sheets, 24” x 48” available by special order
Bright Gold0.02“ 9722021-1
Bright Silver0.02“ 9722022-1
0.04“ 9722628-1
0.125“0.04“ 0.04“ 9722633-1
0.05“
44
AluminumM
etal
s
Aluminum sheets allow for engraving to a bright silver finish. It is lightweight and easy to cut, providing an economical solution for industrial and awards applications.
• Interior Signs• Trophy and Plague Plates• Machinery ID• Memorial Plates
Typical Use
Laserable Aluminum FeaturesMaterial: Aluminum, colour coating over silver, black, white or gold aluminumFinish: matte, glossThickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availabilityCut-to-size and individual services: see page 81
Aluminum FeaturesMaterial: Aluminum, colour coating over silver aluminumFinish: matte, gloss, brushed Thickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Exterior use
45
Laserable Aluminum
Aluminum
Metals
Gloss Black/Silver0.02“ 1033-1
Bright Silver/Silver0.02“ 1022-1
Satin Blue/Silver0.025“ 3030-1
Bright Red/Silver0.025“ 3026-1
Bright Gold/Silver0.02“ 1021-1
Opaque Brown/Silver0.025“ 3037-1
Satin Copper/Silver0.025“ 3038-1
Dark Green/Silver0.025“ 3039-1
Satin Green/Silver0.025“ 3031-1
Opaque Maroon/Silver0.025“ 3035-1
Matte Black/Silver0.025“ 3041-1
Opaque Yellow/Silver0.025“ 3044-1
Opaque Orange/Silver0.025“ 3036-1
Opaque White/Silver0.025“ 3034-1
Opaque Red/Silver0.02“ 3043-1
Bright Purple/Silver0.025“ 3023-1
Royal Blue/Silver0.025“ 3040-1
Satin Gold/Silver0.02“ 1028-1
Satin Silver/Silver0.02“ 1029-1
Satin Violet/Silver0.025“ 3027-1
Silver Metallic/Black0.02“ 1059-1
Matte Silver/Black0.02“ 1429-1
Black/White0.02“ 1433-1
White/Black0.02“ 1434-1
Matte Gold/Black0.02“ 1428-1
Gloss Black/Gold0.02“ 1095-1
Black/Silver0.02“ 1097-1
Bright Red/Silver0.025“ LASER RED ALU
Dark Green/Silver0.025“ LASER GRN ALU
Bright Blue/Silver0.025“ LASER BLU ALU
Purple/Silver0.025“ LASER PPL ALU
12” x 24” sheets, 24” x 48” available by special order
12” x 24” sheets, 24” x 48” available by special order
0.025“ 3033-1
Satin Silver Double Sided0.04“ 5029-1
Black/Silver0.04“ 5095-1
46
BrassM
etal
s
• Exterior & Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Engraving material
Interior use
Not all colour & thickness combinations are stock items, please call for availabilityCut-to-size and individual services: see page 81
Brass FeaturesMaterial: Clear or coloured lacquer coating over gold brassFinish: matte, gloss, brushedThickness: 0.02” / 0.025”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Laserable Brass FeaturesMaterial: Coloured lacquer coating over gold brassFinish: glossThickness: 0.016”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Premium Engraver’s Leaded Brass FeaturesMaterial: Clear lacquer or metallic plating over brassFinish: satin, glossThickness: 0.02” / 0.025” / 0.125” / 0.04” / 0.062”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Brass is a premium material that results in a lustrous gold finish when engraved. Made from a combination of copper and zinc, it can be oxidized to produce black text. Premium Leaded Brass has a small amount of lead and a much higher copper to zinc ratio which makes it easier to engrave and oxidize to a truer black.
Laser material
47
Laserable BrassM
etals
Gloss Black/Gold0.02“ 8013-1
Bright Red/Gold0.02“ BRIGHT RED BRS
Blue/Gold0.025“ BLUE BRASS
Brown/Gold0.025“ BROWN BRASS
Bright Gold/Gold0.02“ 8011-1
Satin Gold/Gold0.025“ 8012-1
Dark Green/Gold0.025“ GREEN BRASS
Maroon/Gold0.025“ MAROON BRASS
Matte Black/Gold0.025“ MATTE BLK BRS
Opaque Red/Gold0.025“ RED BRASS
Purple/Brass0.025“ PURPLE BRASS
White/Gold0.025“ WHITE BRASS
Royal Blue/Gold0.025“ ROY BLU BRASS
Satin Gold Double-Sided Brass0.025“ 8050-1
Gloss Black/Brass0.016“ 6013-1
Classic Marble Blue/Brass0.016“ 5323-1
Classic Marble Grey/Brass0.016“ 5342-1
Classic Marble Green/Brass0.016“ 5322-1
Classic Marble Red/Brass0.016“ 5335-1
12” x 24” sheets, 24” x 48” available by special order
12” x 24” sheets, 24” x 48” available by special order
Premium Engraver’s Leaded Brass12” x 24” sheets, 24” x 48” available by special order
Satin Yellow0.02“ 8020-1
Satin Yellow0.04“ 9110-1
Satin Yellow0.025“ STN LEAD BRAS
Satin Yellow0.062“ 9030-1
Satin Yellow0.125“ 9081-1
Bright Yellow0.04“ 9120-1
Satin Silver/Gold0.02“ STN SIL BRASS
Satin Copper/Gold0.02“ SATIN COPPER
Brass
48
Steel, Nickel and Sublimation MetalsM
etal
s
Brass coated steel offers the finished look of brass at an economical price. Stainless Steel can be rotary engraved and the unlacquered steel is ideal for engraving with the Cermark product line. Nickel Silver is ideal for oxidizing and for sublimation.
• Exterior & Interior Signs• Type Plates• Serial Numbers• Barcodes• Signs with advertising impact
Typical Use
Brass Coated Steel FeaturesMaterial: Steel with brass plating, with or without colour coatFinish: gloss, brushedThickness: 0.015” / 0.016”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availabilityCut-to-size and individual services: see page 81
Stainless Steel and NickelMaterial: Stainless Steel type 430, type 304, or Nickel SilverFinish: gloss, brushedThickness: 0.015”/0.018”/0.020”/0.022”/0.029”/ 0.050”Cutting method: saw, cutting bits, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Exterior use
Sublimation Metals featuresMaterial: Aluminum, steelFinish: gloss, brushedThickness: 0.02” / 0.025” / 0.032” / 0.04” /
0.062” / 0.125”Cutting method: saw, shearSheet sizes: 24” x 12”
Engraving material
Interior use
Laser material
Exterior use
Sublimatable Metals incorporate a high quality coating which accepts maximum dye transfer with crisp detail. Most can be engraved after printing for additional personalization.
• Name Badges• Awards• Photographic Reproduction• POP Displays
Typical Use
Sublimatable Metals
Recommended Heat Setting: 380 degrees F, 35 seconds, with medium pressure.Our Unlacquered stainless steel can be engraved to black using a Fber laser or CO2 laser and Cermark compound. Nickel can be engraved the same way, or diamond dragged and oxidized to produce black text. Nickel and lacquered steel can also be sublimated.
49
Stainless Steel and Nickel
Brass Coated Steel M
etals
Satin SilverLacquered0.015“ 75770
Sublimation
0.018“ 75700
0.018“ 75811 0.022“ 75785
For black engravings must use Thermark
12” x 24” sheets, 24” x 48” available by special order
Bright SilverUnlacquered
Satin SilverUnlacquered
Satin NickelSilver
0.05“ 75818 0.029“ 758130.05“ 75816
Gloss Black/Brass0.015“ 75820
Gloss Red/Brass0.015“ 71995
Gloss Blue/Brass0.016“ 71993
Laser Sub. White/Brass0.015“ 75831
Gloss Purple/Brass0.015“ 71994
Opaque Blue/Brass0.015“ 75829
Opaque Red/Brass0.015“ 75823
Classic Marble Green/Brass0.015“ 75729
Opaque Green/Brass0.015“ 75827
Classic Marble Red/Brass0.015“ 75740
Classic Marble Blue/Brass0.015“ 75730
0.015“ 75469
Classic Marble Grey/Brass0.015“ 75749
Sublimation
Brass CoatedSteel
SublimationNon-Laserable
Sublimation MetalsSatin Gold DynasubAlum
0.02“ 75574
Gloss White LaserSub Steel0.015“ 75831
Satin Silver Dynasub Alum
0.02“ 110728
Satin Gold Sublicoat Alum0.025“ 75634
White Dynasub Alum0.02“ 110730
0.025“ 75402
0.025“ 75420 0.025“ 75421
Satin Silver Sublicoat Alum
Bright Gold Sublicoat Alum
Bright Silver Sublicoat Alum
Dynasub Satin Bronze Alum0.02“ 755780.015“ 75469
Satin Gold Plated Steel Subli
0.015“ 75770
Satin Silver Laquered S/S Subli
Premium White0.03“ 71189
0.020“ 84156
Satin StainlessSteel Type 3040.022“ 75832
Sublimation
0.018“ 75761
Satin Copper Plated Steel
SublimationNon-Laserable
12” x 24” sheets, 24” x 48” available by special order
50
Met
als
Cut-to-size and individual services: see page 81
DuraBlack™
DuraBlack™ is a coated aluminum with a black surface, which can be marked in white with a CO2 laser. Due to the addi-tional layer of protection, DuraBlack is particularly resistant to environmental influences (weathering, salt water, chemicals, etc.). DuraBlack conforms with various industrial and military standards, including MIL-STD 130N, A-A-50271 (MIL-P-514D) and MIL-STD-15024F, Type L.
• Exterior & Interior Signs• Type Plates• Badges • Materials Handling• Military Signage
Typical Use
Material featuresMaterial: Coated AluminumSurface: matteThickness: 0.005” / 0.020”Cutting method: saw, shearSheet sizes: 24” x 12”
Interior use
Laser material
Black matte0.02“ 7585973-D | 10“ x 12“ x 0.005“ with adhesive
7585974-D | 20“ x 12“ x 0.02“ 7585976-D | 20“ x 24“ x 0.02“
Exterior use
Not all colour & thickness combinations are stock items, please call for availability
51
Metals
Alumamark™
Alumamark™ is a coated aluminum with a brushed or matte metallic surface, which can be marked in black with a CO2 laser. AlumaMark is designed in such a way that even low laser power levels can create a high-contrast engraving.
• Interior Signs• Name Plates• Badges • Trophy Signs• Labels
Typical Use
Material featuresMaterial: Coated AluminumSurface: brushed or matteThickness: 0.005” / 0.020”Cutting method: saw, shearSheet sizes: 24” x 20”, 20” x 12”, 12” x 10”
Interior use
Laser material
Matte Silver
Satin Silver
0.02“ 7585267-D
0.005“ 7585260-D** w/ adhesive
0.02“ 7585271-D*
Mirrored Silver
0.02“ 7585266-D0.02“ 7585268-D w/ adhesive0.02“ 7585270-D*
Satin Gold0.02“ 7585238-D0.02“ 7585231-D*
Mirrored Gold0.02“
7585248-D
0.02“ 7585284-DSatin Red
0.02“ 7585205-D
Satin Bronze0.02“
7585285-D
Satin Brass0.02“ 7585252-D0.02“ 7585253-D*
* 20“ x 24“ ** 10“ x 12“
Satin Yellow0.02“ 7585206-D
Satin Orange0.02“ 7585207-D
Satin 5 Colour Pack0.02“ 7585209-D**
Satin Green0.02“ 7585208-D
Satin Blue0.02“ 7585209-D
52
Woo
ds
Cut-to-size and individual services: see page 81
Solid Wood
Available in five luxurious finishes our solid wood panels are ideally suited for the requirements of laser processing. A sanded, matt and varnished surface offers an authentic high quality appearance and durability. Our panels are incredibly versatile and can be used for a multitude of applications such as small interior signage, interior decorations, fashion accessories and promotional giftware.
• Interior Signs• Arts and crafts• Promotional items• Awards and trophies
Typical Use
Material featuresMaterial: Solid WoodFinish: sanded and varnished, mattThickness: 3/16“ , 1/8“ (Alder)Cutting method: saw, laserSheet size: 23.5“ x 11.75“, 11.75“ x 3.9“ (pack of 20)
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availability
53
Woods
Solid WoodMaple
Cherry
Alder
Oak
Walnut
23.5“ x 11.75“ x 3/16“
23.5“ x 11.81“ x 3/16“
23.5“ x 11.75“ x 3/16“
23.5“ x 11.75“ x 3/16“
23.5“ x 11.75“ x 3/16“
11.75“ x 3.9“ x 3/16“
11.81“ x 3.93“ x 3/16“
11.75“ x 3.9“ x 3/16“
11.75“ x 3.9“ x 1/8“
11.75“ x 3.9“ x 3/16“
11.75“ x 3.9“ x 3/16“
120182
120185
120184
120183
120186
120166
120170
120169
120168
120167
120171
54
Woo
ds
Cut-to-size and individual services: see page 81
Wood Veneer
Our veneered wood is supplied with a formaldehyde free fiber board core with real wood laminated on each side. Sanded smooth with semi-matt varnish, they are suitable for a wide range of applications.
• Interior Signs• Gifts• Architectural model making• Arts and crafts
Typical Use
Material featuresMaterial: Veneered Wood SheetsFinish: semi-matt, sanded and varnished Thickness: 1/8”Cutting method: saw, laserSheet size: 23.5“ x 11.75“
Interior use
Laser material
Exterior use
Not all colour & thickness combinations are stock items, please call for availability
Cherry
Birch
Cedar
Bamboo
MapleWalnut
1/8“
1/8“
1/8“
1/8“
1/8“1/8“
119801
119800
119953
119799
119798119952
55
Woods
Plywood and MDF
The MDF fibreboard panels feature a high surface quality and homogenous fibre structure. The high fibre density allows for great results even in fine-detail laser cutting.The Plywood panels are made from softwood, combining lightweight characteristics with improved dimensional stability. The untreated, bright surface is ideal for laser marking or to be painted on.
• Interior Signs• Gifts• Architectural model making• Arts and crafts
Typical Use
Material featuresMaterial: MDF, Plywood poplarFinish: Untreated Thickness: 1/8”, 1/4”Cutting method: saw, laserSheet size: 48“ x 23.5“ (MDF), 24“ x 11.75“, 11.75“ x 11.75“
Interior use
Laser material
Exterior use
Plywood 23.5“ x 11.75“
MDF 48“ x 23.5“
11.75“ x 11.75“
23.5“ x 11.75“
11.75“ x 11.75“
1/8"
1/8"
1/8"
1/8"
1/8"
1/4"
1/4"
1/4"
1/4"
68987
68995
68988
68996
68997
119957
119956
68990
120164
TipsWe recommend that you allow time for the wood to acclimatise to its new environment before processing. Ideally maintain in an area with constant temperature/humidity.
60
Acc
esso
ries
Badge Findings
All badges engrave to gold. For colour, you can oxidize or colour fill after engraving. Fastners and clipscome in bags of 50, magnets come in bags of 50 pieces.
Fasteners
128-211S
White Bar PinPlastic 1.5“ LongSelf-Adhesive
128-211P
White Bar PinPlastic 1.5“ LongNon-Adhesive
128-103S
Bar PinMetal, 1.5“ LongSelf-Adhesive
128-103P
Bar PinMetal, 1.5“ LongNon-Adhesive
128-612SG
Military Bar 2“Vinyl with ClutchSelf Adhesive
128-612PG
Military Bar 2“Vinyl with ClutchNon-Adhesive
128-611PG
Single Tack with Clutch
Clips
128-503P
Bull Dog Pressure ClipPlastic Base3/4“ x 3/4“
128-503S
Badge Clip, Metal3/4“ Square SwivelSelf-Adhesive
128-205H
Metal Clip with Clear Swivel Strap
Magnets
128-MO1
Steel Cover Magnet
128-MO2
Plastic Cover Magnet
128-MO3
Plastic Cover Magnet
128-MO4
Round Magnet
128-MO5
Triple Magnet Plastic Cover
1.8“x.55“ 1.75“x.5“ 1.3“x.45“
.65“x.65“ 1.8“x.5“
61Visit our website: www.troteclaser.com
Accessories
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG38C 352-MBG38P 352-MBG38CB
Satin Gold 352-MSG38C 352-MSG38P 352-MSG38CB
Bright Silver 352-MBS38C 352-MBS38P 352-MBS38CB
Satin Silver 352-MSS38C 352-MSS38P 352-MSS38CB
Chrome Plated 352-MCP38C 352-MCP38CB
Metal Name Badges
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG12C 352-MBG12P 352-MBG12CB
Satin Gold 352-MSG12C 352-MSG12P 352-MSG12CB
Bright Silver 352-MBS12C 352-MBS12P 352-MBS12CB
Satin Silver 352-MSS12C 352-MSS12P 352-MSS12CB
Chrome Plated 352-MCP12C 352-MCP12CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG58C 352-MBG58P 352-MBG58CB
Satin Gold 352-MSG58C 352-MSG58P 352-MSG58CB
Bright Silver 352-MSB58C 352-MSB58P 352-MSB58CB
Satin Silver 352-MSS58C 352-MSS58P 352-MSS58CB
Chrome Plated 352-MCP58C 352-MCP58CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG34C 352-MBG34P 352-MBG34CB
Satin Gold 352-MSG34C 352-MSG34P 352-MSG34CB
Bright Silver 352-MSB34C 352-MSB34P 352-MSB34CB
Satin Silver 352-MSS34C 352-MSS34P 352-MSS34CB
Chrome Plated 352-MCP34C 352-MCP34CB
Finish Colour Clutch Pin Back Blank
Bright Gold 352-MBG1C 352-MBG1P 352-MBG1CB
Satin Gold 352-MSG1C 352-MSG1P 352-MSG1CB
Bright Silver 352-MSB1C 352-MSB1P 352-MSB1CB
Satin Silver 352-MSS1C 352-MSS1P 352-MSS1CB
Chrome Plated 352-MCP1C 352-MCP1CB
3/8“ x 2 1/4“ Satin Gold
1/2“ x 2 3/8“ Bright Gold
5/8“ x 2 1/2“ Satin Silver
3/4“ x 3“ Bright Silver
1“ x 3“ Chrome Plated
Trotec Laser Canada makes custom name badge blanks. We are able to make virtually any shape and size, ranging from your basic rectangle bevelled tags, rounded corners or custom shapes.
Your Logo Here
Address Here
Your Customer Information Here
Engraving also available
Name Tag Blanks
62
Acc
esso
ries
Badge Accessories
Part Number Size Quantity Colour
440-76000 1/2“ 100/box Silver
440-76400 1“ 100/box Silver
440-76600 1 1/4“ 100/box Silver
440-77400 1“ 100/box Brass
Split Rings
Brass Ornamental Plates
Part Number Sizes Colour
75701 3/8 x 2 1/2 brass ornamental plate Satin Gold
75702 1/2 x 3 brass ornamental plate Satin Gold
75703 3/4 x 3 1/2 brass ornamental plate Satin Gold
75704 3/4 x 4 brass ornamental plate Satin Gold
Part Number Size Quantity Hole Size
440-26006 3/4“ 100/box 4 mm
440-26010 1“ 100/box 4 mm
440-26012 1 1/4“ 100/box 7 mm
440-26013 1 3/8“ 100/box 7 mm
440-26017 1 7/8“ 100/box 8 mm
Brass Tags w/ Hole
Part Number Size Quantity Colour
440-31700 No. 6 Ball Chain 100ft Spool Nickel Plated Steel
440-32100 No. 3 Ball Chain 100ft Spool Nickel Plated Steel
440-31900 No. 6 Connector Ball Chain 100/pkg Nickel Plated Steel
440-32900 Ball Chain End Couplings 100/pkg Nickel Plated Steel
440-32250 No. 3 Connector Ball Chain 100/pkg Aluminum
440-31400 No. 6-4 1/2“ Ball Chain (Pre-Cut) 100/pkg Nickel Plated Steel
Ball Chain
Part Number Size Quantity Colour
972-902-0S 1/2“ Tall 25/bag Silver
972-901-0G 1/2“ Tall 25/bag Brass
S Hooks
64
Acc
esso
ries
Tapes, Velcro & Adhesive
Sublimation Heat Tape
Part Number Description Sizes
058-CW-215-1272 High Temperature Tape for Sublimation 1/2“ x 60 yrds
Engraving Table Tape
Part Number Description Sizes
058-TWO-SIDED Two-Sided Table Tape 1/2“ x 72 yrds
058-TT7147-1966 Two-Sided Table Tape 3/4“ x 60 yrds
Adhesive Rolls and Sheets
Part Number Description Sizes
0583M-ADHESIVE 3M Adhesive 3M Adhesive #9502 24“ x 60 yrds
0583M-468MP 3M Adhesive 3M Adhesive #468MP 24“ x 60 yrds
0583M ADH SHEETS 3M Adhesive 3M Adhesive #9502 12“ x 24“0583M ADHESIVE12 3M Adhesive 3M Adhesive #9502 12“ x 60 yd
0583M-467MP 3M Adhesive 3M Adhesive #9141 12“ x 180 yd058S234 Economy Adhesive Tape, S234 Double Coated 12“ x 60 yds
Magnetic Tape
Part Number Description Sizes
670-PSA-.5 Magnetic Tape w/ PSA 0.060“ x 100‘ x 0.5“
670-PSA-.75 Magnetic Tape w/ PSA 0.060“ x 100‘ x 0.75“
670-PSA-1 Magnetic Tape w/ PSA 0.060“ x 100‘ x 1“
623SUS 225 Magnetic Sheet w/ PSA 12“x24“ Self Adhesive
Velcro Rolls
Part Number Description Sizes
305-190911 Velcro Loop Black 3/4“ x 25 yrds
305-190940 Velcro Hook Black 3/4“ x 25 yrds
305-196256 Velcro Loop Black 1/2“ x 25 yrds
305-196802 Velcro Hoop Black 1/2“ x 25 yrds
305-190984 Velcro Loop Black 1“ x 25 yrds
305-191051 Velcro Hoop Black 1“ x 25 yrds
305-190899 Velcro Loop White 3/4“ x 25 yrds
305-190935 Velcro Hook White 3/4“ x 25 yrds
305-195472 Velcro Loop White 1/2“ x 25 yrds
305-195473 Velcro Hook White 1/2“ x 25 yrds
305-190959 Velcro Loop White 1“ x 25 yrds
305-191033 Velcro Hook White 1“ x 25 yrds
65Visit our website: www.troteclaser.com
Accessories
Foam Tape
Part Number Thickness Sizes
058-CW3016-.5 1/16“ 1/2“ x 36 yrds
058-CW3016-.75 1/16“ 3/4“ x 36 yrds
058-CW3016-1 1/16“ 1“ x 36 yrds
058-CW3016-1.5 1/16“ 1 1/2“ x 36 yrds
058-CW3032-.38 1/32“ 3/8“ x 72 yrds
058-CW3032-.5 1/32“ 1/2“ x 72 yrds
058-CW3032-.75 1/32“ 3/4“ x 72 yrds
058-CW3032-1 1/32“ 1“ x 72 yrds
058-CW3032-2 1/32“ 2“ x 72 yrds
058-S400818-.75 1/8“ 3/4“ x 25 yrds
Double Sided Application Tape - Scapa
Part Number Sizes
0584403-.25 1/4“ x 36 yrds
0584403-.5 1/2“ x 36 yrds
0584403-.75 3/4“ x 36 yrds
0584403-1 1“ x 36 yrds
0584403-1.5 1 1/2“ x 36 yrds
0584403-2 2“ x 36 yrds
0584403-3 3“ x 36 yrds
0584403-4 4“ x 36 yrds
0584403-12 12“ x 36 yrds
Double Sided Application Tape - TESA
Masking
Part Number Sizes
058-GXP775-6 6“ x 72 yrds
058-GXP775-8 8“ x 72 yrds
058-GXP775-12 12“ x 72 yrds
Part Number Sizes
058TT4970-.38 9mm x 55m (3/8 in)
058TT4970-.5 12mm x 55m(1/2 in)
058TT4970-.75 19mm x 55m (3/4 in)
058TT4970-1 25mm x 55m (1 in)
058TT4970-1.5 38mm x 55m (1.5 in)
058TT4970-2 50mm x 55m (2 in)
058TT4970-3 75mm x 55m (3 in)
058TT4970-4 101.6mm x 55m (4 in)
Part Number Sizes
058A754288 Film, Blue PVC Surface 3mil x 12“ x 330
623SUS 188 LiquaMask - Half Gallon
623SUS 189 Liquid Mask - Quart
700LASERS EDGE 6“ x 25 yds Lasers ft Edge (red)
66
Acc
esso
ries
Tapes, Velcro & Adhesive
Not all colour & thickness combinations are stock items, please call for availability
Felt Pads
Oxidizer
Part Number Description Volumes
786-A384-8 A-384 Oxidizer for Aluminum 8 oz
786-A384-4 A-384 Oxidizer for Aluminum 4 oz
786-B/OX324-8 B/OX 324 Oxidizer for Brass 8 oz
786-B/OX324-4 B/OX 324 Oxidizer for Brass 4 oz
Part Number Description Sizes
972-928-00 1/2“ diameter 1,000/roll
Multi Mat
Part Number Description Sizes
G01-MULTI MAT Sold by the Square Foot Master Sheet - 24“ x 48“
Laser Foil
Part Number Description Sizes
700-FOIL BLUE Metalized Blue Foil 6“ x 25‘
700-FOIL BR GOLD Metalized Bright Gold Foil 6“ x 25‘
700-FOIL GREEN Metalized Bright Green Foil 6“ x 25‘
700-FOIL RED Metalized Red Foil 6“ x 25‘
700-FOIL SILVER Metalized Bright Silver Foil 6“ x 25‘
700-FOIL STN GOLD Brushed Gold Foil 6“ x 25‘
Cleaning Products
Part Number Description
TRP69248 LENS CLEANER
TRP69249 LENS TISSUE
875-20009 4oz Triflow Lubricant
67Visit our website: www.troteclaser.com
Accessories
Cable Tags
Trotec Laser Canada stocks stainless steel cable tags in the most common sizes and configurations, all laser cut or die punched to ensure consistency from piece to piece and from order to order. They are ideal for use with the Cermark metal marking compounds, or for direct marking with Fiber lasers or rotary engravers. Custom sizes and hole configurations are available upon request.
Part Number Description SAP
TAG1.5SS 1 1/2 in Dia. Tag w/ .250 in hole, #304 75933
TAG1H343 3/4 x 3 Cable tag with 1/8 holes, #304 SS 75934
TAG1H343.25H 3/4 x 3 Cable tag with 1/4 hole, #304 SS 75935
TAG3/4X4 3/4 x 4 Cable tag with 4 slots, #304 SS 86492
TAGCABLE .75X3SS 3/4 x 3 Cable tag with 4 slots, #304 SS 75936
TAGCABLE 1X2SS2H 1 x 2 Cable tag w 2 holes (.125) #304 SS 75938TAGCABLE 1X3 1 x 3 Blank Cable tag SS - no holes 75939
TAGCABLE 1X3SS 1 x 3 Cable tag with 4 slots, #304 SS 75942
TAGCABLE 1X3SS1H 1 x 3 Cable tag w 1 hole (.250) #304 SS 75943
TAGCABLE 1X3SS2H 1 x 3 Cable tag w 2 holes (.125) #304 SS 75945
TAGCABLE 1X3SSUM 1 x 3 Cable tag with 4 slots, unmasked 75946
TAGCABLE 1X4 1 x 4 Cable tag with 1 hole .250 75937
TAGTG12-0003 2 in Dia. tag with 1 hole, #304 #4 SS 75948
1 x 3 Cable tag w 2 holes (.125“)
2 in Dia. tag with 1“ hole1 x 3 Cable tag with 4 slots
3/4 x 3 Cable tag with 4 slots
3/4 x 3 Cable tag with 1/4“ hole 1 x 2 Cable tag w 2 holes (.125“)
3/4 x 3 Cable tag with 1/8“ holes1 x 3 Cable tag with 1/4“ holes
75935 75938 75942 75948
75936 75945 75943 75934
68
Acc
esso
ries
Trophy Shields & Pet Tags
Our trophy shields and pet tags are die punched for consistent size and quality, from the best engravea-ble materials for easy personalization.
1.5“ x 1.25“ 75513Bright Silver
Trophy Shields
1.5“ x 1.25“ 75512Bright Gold
1.5“ x 1.25“ 75521Satin Silver
1.5“ x 1.25“ 75515Satin Gold
1.5“ x 1.25“ 75522Black
1.5“ x 1.5“ 75507Bright Gold
1.5“ x 1.5“ 75510Black
1.5“ x 1.5“ 75509Bright Silver
1.5“ x 1.5“ 75529Black
1.5“ x 1.5“ 75528Bright Silver
1.5“ x 1.5“ 75527Bright Gold
Laserable Shields
1.5“ x 1.25“ 75525Matte Silver (will laser to black)
1.5“ x 1.25“ 75523Gloss Black (will laser to gold)
1.5“ x 1.25“ 75524Matte Gold (will laser to black)
1.5“ x 1.5“ 75511Gloss Black (will laser to gold)
Stainless Steel Pet Tags
1 1/16“ x 1 7/16“ 0.032SAP 75270 951-L 6 SS
Fire Hydrant
SAP 75280 951-L 9 SS
Heart
1“ x 1 1/2“ 0.032SAP 75196 951-L 1 SS
Dog Bone
1 1/4“ DiameterSAP 75198 951-L 15 SS
Circles1 1/4“ x 1 1/8“
2“ x 1.15“ 122261
Military Tag
1 5/16“ DiameterSAP 75883 972-991-00
Circle w/Loop
69Visit our website: www.troteclaser.com
Accessories
Anodized Aluminum Pet Tags
0.8“ x 0.95“
122233 122226122231 122230122227 122232122229 122228
122222 122213122220 122219122214 122221122218 122217
122212 122205122210 122209122206 122211122208 122207122204 122197122202 122201122198 122203122200 122199
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
122162 122134122140 122139122135 122141122138 122137122171 122163122169 122168122165 122170122167 122166
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
122252 122244122250 122249122245 122251122248 122246122243 122235122241 122240122237 122242122239 122238
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
122179 122172122177 122176122173 122178122175 122174
122195 122188122193 122192122189 122194122191 122190122187 122180122185 122184122181 122186122183 122182
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
S-L-
122260 122253122258 122257122254 122259122256 122255
753767536175359 7536275360 753717527275271 7527375274
S- S-L-
S-L-
S-L-
S-L-
S-
7534375331 7534475342 75347
7538675384 7538775385 75388
Gold Red Blue Purple Pink Green Silver Black
Dog
0.87“ x 0.9“
Cat
Small - 0.83“ x 1.2“
Bone
Large - 1.57“ x 1.1“
Small - 0.8“ x 0.87“
Heart
Large - 1.5“ x 1.3“
Small - 1“ x 1“
Heart w/ Loop
Large - 1.2“ x 1.25“
Small - 0.1“ x 0.1“
Circle
Large - 1.25“ x 1.25“
1.06“ x 1.06“
Circle w/ Loop
2“ x 1.14“
Military
Small - 1“ x 0.87“
Hydrant
Large - 1.03“ x 1.3“
2“ x 1.14“
Mouse
1.5“ x 0.06“
Dog House
76
Acc
esso
ries
JRS Sign Frames
JRS Sign Frames and Holders are made from high quality components in the USA. They perfectly accent your engraved plastic nameplates, and add a finished look to directional and tactile signage. Custom frames can be made to your specifications, call for a quotation on your design.
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
54 1-1/4“ 1/16“
70 1-1/2“ 1/16“
19 1-1/2“ 1/8“
14 1-5/8“ 1/16“
48 2“ 1/16“11 2“ 1/8“16 3-1/4“ 1/8“
A
B
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
Part No. Insert Size A Insert Size B
85 3/4“ 1/16“
25 1“ 1/16“
Part No. Insert Size A Insert Size B
59 2“ 1/16“A
B
A
B
A
B
Desk Holders
Available Lengths: 4” / 6” / 8” / 10” / 12”
Available Lengths: 8” / 10”
Available Lengths: 8” / 9” / 10” Available Lengths: 8” / 9” / 10”
Available Finishes: Bright Rose Gold, Bright Silver, Satin Silver, Black, Bright Yellow Gold
77
Counter & Desk Bases
Part No.
Insert Size A
Insert Size B
Max. Sign Height
15 3/4“ 1/16“ 2“
50 15/16“ 1/16“ 3“
97 1-7/16“ 1/16“ 7“
17 1-3/32“ 1/8“ 4“55 2-1/2“ 1/8“ 8“
Available Lengths: 6” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
40 1-1/4“ 1/16“ 2“
Available Lengths: 3-3/4” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
35 1-1/4“ 1/16“ 6“
42 1-1/4“ 1/8“ 6“
22 2-1/2“ 1/16“ 12“
39 1-1/4“ 3/32 6“
Available Lengths: 3/3-4” / 8” / 10” / 12”
Part No.
Insert Size A
Insert Size B
Max. Sign Height
P100 2“ 1/16“ 6“
Available Lengths: 8” / 10”
Wall & Corridor Brackets
A
B
Part No. Insert Size A Insert Size B
86 1/2" 1/16"
100 5/8" 1/16"
44 3/4" 1/16"
28 1" 1/16"
47 1-1/4" 1/16"
29 1-1/2" 1/16"
95 1-1/2" 1/8"46 1-5/8" 1/16"87 1-3/4" 1/16"88 1-3/4" 1/8"36 2" 1/16"94 2" 1/8"89 2-1/2“ 1/16"90 2-1/2" 1/8"37 3" 1/16"52 3" 1/8"49 4" 1/16"51 4" 1/8"
Available Lengths: 4” / 6” / 8” / 10” / 12” / 36”
Part No.
Insert Size A
Insert Size B
56 1" 1/16"57 1-1/2" 1/16"
58 2" 1/16"
Accessories
Available Lengths: 4” / 6” / 8” / 9” 10” / 12” / 36”
Part No. Insert Size A Insert Size B
38 2-1/2“ 1/8“
Available Lengths: 2” / 3” / 4” / 5” 10” / 12” / 36”
78
Acc
esso
ries
Part No.Insert Size A
Insert Size B
Insert Size C
23 2“ 1-1/2“ 1/16“
Desk Holders
Available Lengths: 9” / 10” / 12” Available Lengths: 6” / 8” / 10”
B
c
A
B
c
A B
A
BcAvailable Lengths: 8” / 10” Available Lengths: 6” / 8” / 10”
Part No.Insert Size A
Insert Size B
Insert Size C
61 1“ 1-1/4“ 1/16“
Part No.Insert Size A
Insert Size B
Insert Size C
60 2“ 1-1/2“ 1/16“
Part No.Insert Size A
Insert Size B
Insert Size C
71 1-1/4“ 1-1/4“ 1/16“
33 2“ 2“ 1/16“
Desk Holders
Part No.Insert Size A
Insert Size B
Insert Size C
Insert Size D
112 1-1/2" 1-1/2" 1-1/2" 1/16"
106 1" 1" 1" 1/16"
109 3/4" 3/4" 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
Insert Size B
Insert Size D
115 2" 1" 1/16"
107 1-1/2" 1" 1/16"
108 1-1/4" 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
Insert Size D
103 1" 1/16"
114 3/4" 1/16"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
75 1/16"
83 1/8"
Available Lengths: 6” / 8” / 10” / 36”
Part No.Insert Size A
76 1/16"
84 1/8"
Available Lengths: 36”
Part No.Insert Size A
27 1/16"
Available Lengths: 36”
Part No.Insert Size A
78 1/16"
Available Lengths: 36”
Part No.Insert Size A
77 1/16"
Available Lengths: 36”
79
Architectural Aluminum Frames
Part No. Insert Size Style
341-66 1/16" 3/8" Radius Corner
641-66 1/8" 3/8" Radius Corner
241-66 1/16" Square Corners
541-66 1/8" Square Corners
Available Lengths: 6” x 6” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.
Accessories
Part No. Insert Size Style
341-88 1/16" 3/8" Radius Corner
641-88 1/8" 3/8" Radius Corner
241-88 1/16" Square Corners
541-88 1/8" Square Corners
Available Lengths: 8” x 8” frame containing 1” x 6” extrusion for a 1/16” message plate and a second 1/16” slot for a 1” x 3” Slider plate to uncover alternating messages.
Part No. Insert Size Style
344-23 1/16" 3/8" Radius Corner
644-23 1/8" 3/8" Radius Corner
244-23 1/16" Square Corners
544-23 1/8" Square Corners
Available Lengths: 2” x 13” slider frame is designed for 2” x 10” message plate to slide left or right to expose message at opposite end.
80
Acc
esso
ries
Stand-offs are made of solid stainless steel for durability and long lasting quality appearance. Alternative
sizes and fixing options offer a wide range of sign and mounting options.
Screw caps are the easy to use alternative to give a high-quality appearance to a regular screw. A simple
cap holder is applied together with the sign using a standard screw. The elegant cap made of solid stain-
less steel provides for an elegant cover.
Stand-off R15-15-FL and R20-20-FL
Stand-off S15-15-FK and S25-25-FK
Description Product SizePackage options
Order No.
Stainless matt, round, flat head, left-hand thread
R15-15-FL Diameter: 15mm (0.59“) Wall distance: 15mm (0.59“)Sign hole: 11mm (0.43“)Thickness of sign: 2-5mm
(0.08“-0.2“)
4 pieces, incl. mounting srews
128994
Pack of 50 pieces
129000
R20-20-FL Diameter: 20mm (0.78“) Wall distance: 20mm (0.78“) Sign hole: 13mm (0.51“)Thickness of sign: 3-18mm
(0.12“-0.7“)
4 pieces, incl. mounting srews
128999
Pack of 50 pieces
129005
Description Product SizePackage options
Order No.
Stainless matt, square, flat head, hex key fixing
S15-15-FK Height/Width: 15mm (0.59“) Wall distance: 15mm (0.59“) Sign hole: 11mm (0.43“)Thickness of sign: 2-5 mm
(0.08“-0.2“)
4 pieces, incl. mounting screws + hex key
128998
Pack of 50 pieces
129004
S25-25-FK Height/Width: 25mm (0.98“) Wall distance: 25mm (0.98“) Sign hole: 16mm (0.63“) Thickness of sign: 2-10 mm
(0.08“-0.4“)
4 pieces, incl. mounting screws + hex key
128997
Pack of 25 pieces
129003
Stand-Offs & Mounting Fixtures
81
Accessories
Screw caps
Stand-off R20-15-FK
Description Product SizePackage options*
Order No.
Stainless matt, rount, flat head, hex key fixing
R20-15-FK Diameter: 15mm (0.59“) Wall distance: 20mm (0.78“) Sign hole: 11mm (0.43“)Thickness of sign: 1-12mm
(0.04“-0.47“)
4 pieces, incl. mounting screws
128996
Pack of 50 pieces
129002
DescriptionPackage options
Product SizeOrder No.
Stainless matt, round screw cap, left-hand thread
Pack of 20 pieces incl. screw-holder + cap
R10/3-FL Diameter: 10mm (0.39“) Screw size: 3mm (0.12“)
129006
R15/3.5-FL Diameter: 15mm (0.59“) Screw size: 3.5mm (0.14“)
129007
R18/4.5-FL Diameter: 18mm (0.71“) Screw size: 4.5mm (0.18“)
129008
Stand-off E16-16-FK
Description Product SizePackage options*
Order No.
Stainless matt, round, flat head, edge grip, x key fixing
E16-16-FK Diameter: 16mm (0.62“) wall distance: 16mm (0.62“) Thickness of sign: 3mm (0.12“)
4 pieces, incl. mounting screws + hex key
128995
Pack of 50 pieces
129001
Tips*Package options:
Please consider that pack of 25 and 50 pieces are without mounting screws or hex keys.