Laser Safety Presentation David Baer – Laser Safety Officer Centre for Lasers & Applications...
-
Upload
fernanda-spratt -
Category
Documents
-
view
214 -
download
0
Transcript of Laser Safety Presentation David Baer – Laser Safety Officer Centre for Lasers & Applications...
Laser Safety Presentation
David Baer – Laser Safety OfficerCentre for Lasers & Applications Macquarie University - April 2004
Plan your experiment Source correct optics and mounting
hardware Map out beam paths Do the Laser Safety Calculations
The First Step in Laser Safety
The Laser Classification System
Ap
prox. P
ow
er L
imits for
CW
Visible
Wa
veleng
ths On
ly
Class 4Unsafe for eyes
Unsafe for skin
0.5 W Class 3B Unsafe for eyes
Generally safe for skin
5 mW Class 3A Safe with (0.25 s.) aversion response no viewing aids
1 mW Class 2Visible wavelengths only
Safe with (0.25 s.) aversion response including viewing aids
220μW to 0.4μW
Class 1 No precautions required
Ap
prox. P
ow
er L
imits for
CW
Visible
Wa
veleng
ths On
ly
Class 4Unsafe for eyes
Unsafe for skin
0.5W Class 3B Unsafe for eyes
Generally safe for skin
5mW Class 3R Safe with (0.25 s.) aversion response no viewing aids
0.5W Class 2MVisible wavelengths only
Safe with no viewing aids
1mW Class 2Visible wavelengths only
Safe with (0.25 s.) aversion response including viewing aids
0.5W Class 1M Safe with no viewing aids
220μW to 0.4μW
Class 1 No precautions required
The New Classification System
Why Lasers Are Hazardous
2 Main Factors.
Collimation Effects : More light can be introduced into the eyes compared to other light sources.
Spot Size Effects : Radiation in the 400 – 1400nm region is brought to a sharp focus on the retina. This can increase the radiant exposure (irradiance) by approx 100,000 times.
To Determine the Laser Hazard
6 main factors need to be taken Consideration.
Wavelength
CW or Pulsed Operation
Power or Pulse Energy
Repetition Rate (PRF)
Beam Diameter & Profile
Beam Divergence
Eye Effects Video Segment
Laser radiation effects on the eye.
From Laser Safety Video from Uni. of Southampton.
Laser Safety Eye Effects Video
Loading Video Presentation…………
Laser Effects on Eyes and Skin
Lasers Safety Precautions
Class 1 & 1M Lasers : - No Precautions
Class 2 & 2M Lasers : - No Staring
Class 3R Lasers : - No Staring
(also old Class 3A lasers) - No Magnifiers
Lasers Safety Precautions
Class 3B & - Avoid Exposure
Class 4 Lasers : - Know the NOHD
- Controlled Area
- Use Beam Stops
- Diffuse Reflections Hazardous
- Use Eye Protection
- Interlocks Required
- Chemical / Electrical hazards
Lasers Safety @ the CLA
Majority of lasers are High Power Class IV Lasers Research lasers may have many wavelengths
Laser, Chemical and Electrical safety procedures must be followed
No Laser maintenance after hours
Laser Safety Video
Laser Safety Video presentation from the Laser
Institute of America.
Visit the LIA websites – valuable information on
lasers and safety is available here.
www.lasersafety.org
www.laserinstitute.org
Laser Safety Video
Loading Video Presentation…………
General Lab Safety
Clothing: No watches & rings. Long sleeve clothing encouraged. Wear enclosed footwear in labs.
Tripping hazards: cables, equipment on floors. Use cable trays whenever possible.
Housekeeping: When finished with equipment, put it away. If equipment is broken, get it fixed (see your supervisor).
General Laser Lab Safety Never directly view a laser beam.
Never remove covers from equipment without approval from supervisors – laser, high voltages and other hazards are present.
Although no deaths have been recorded from laser beam exposure, a number of people have been killed by Laser HV Excitation circuits.
Familiarise yourselves with the Australian laser safety standard (present in most labs) and the MSDS folders regarding chemicals and materials you use. If relevant MSDS inform your Supervisor.
Optical – Research Lasers Research Lasers
Multiple wavelengths – selection of laser eyewear
No aperture Stickers
Optical – Table Hardware
Avoid the use of periscopes, keep laser beams in the one horizontal plane on optical tables. (A researcher at a university was permanently blinded aligning a periscope)
Never use horizontal beam posts. (if a mirror is knocked, it can deflect a beam off the horizontal plane)
Optical – Laser Monitoring Use alignment jigs and attenuators during set
up
Consider using remote monitoring (cameras, laser beam analysers, fluorescent crystals and cards)
Optical – Laser Labs
No line of sight between optical tables and hallways. (use internal partitions and optical barriers on tables)
STAGED
Optical – Laser Labs A labyrinth style entryway into labs, giving a safe
area to put on safety equipment (PPE).
A storage rack for laser safety eyewear (labeled with wavelengths etc).
Laser Generated Air Contaminants
Machining polymers can release acidic and carcinogenic by-products
Familiarise yourself with any potential by-products
Consult MSDS, reference books and supervisors
Use adequate extraction
Other Lab Hazards - Chemical
Laser dyes – most dyes are carcinogenic
Insulation Materials – Dusts, Fibres (Wear Masks)
Optical Fibers – Eye hazards
Solvents – flammability
Other Lab Hazards - Electrical High voltages – Always ensure covers are in place. 240 v – No uninsulated connections permitted. Use removable insulated covers on experimental
circuits. Don’t leave live circuits unattended. Safety Concerns - Contact Greg Yates from METS.
Other Lab Hazards - Gases Vacuum system – implosion issues with glass
vessels. Safety glasses must be worn.
Compressed gases – toxicity, flammability and asphyxiation hazards.
Other Lab Hazards - Cryogenic
Liquid nitrogen – burns and asphyxiation hazards.
Liquid N2 can condense O2 from the atmosphere and may cause an explosion.
Ensure you have been trained in the correct way to handle liquid N2.
Do not accompany full Liquid N2 Dewars in Lifts.
Other Lab Hazards - Combinations
High Volts and Solvents/ Oils – Fire risk.
High Voltages and Water – Electric shock.
High Voltage40 kV
Water Cooling
Insulation Materials
Oil Cooling(Hot Oil)
Laser Beam200W
Vacuum System
High Temp 800C
Ionising Radiation from Thyratron
Toxic Gases
UV from Discharge
Plan your experiment Source correct optics and mounting
hardware Map out beam paths Do the Laser Safety Calculations
The First Step in Laser Safety
Conclusion
Always wear correct Laser Safety Glasses
Consider all the implications of your project.
Always think what your doing.
Report any lab problems or concerns to your supervisor and/or myself & Mark Ainsworth.