Laser Enclosure to Elevated Rail Assembly
6
Laser Enclosure to Elevated Rail Assembly Wyman Gordon Forging Locator Original Revision: 2/14/2013
description
Laser Enclosure to Elevated Rail Assembly. Wyman Gordon Forging Locator Original Revision: 2/14/2013. Before & After. Step 1: Attach Bolts to Rail Attachment. Loosely attach bolts on both sides of elevated rail attachments. Step 2: Attach Elevated Rail to Laser Enclosure. - PowerPoint PPT Presentation
Transcript of Laser Enclosure to Elevated Rail Assembly
Laser Enclosure to Elevated Rail AssemblyWyman Gordon Forging LocatorOriginal Revision: 2/14/2013
Before & After
Step 1: Attach Bolts to Rail Attachment
Loosely attach bolts on both sides of
elevated rail attachments.
Step 2: Attach Elevated Rail to Laser Enclosure
Slide the elevated rail from the front of the enclosure bracket
to the back by placing the connected nut and bolt into
the track on the bracket
Step 3: Alignment
Align the elevated rail and bracket by positioning the
front rail attachment flush to the front of the enclosure
bracket
Final Step: Tighten Bolts
Tighten bolts in the rail attachment to
the enclosure bracket to finish
assembly