Laser Enclosure to Elevated Rail Assembly Wyman Gordon Forging Locator Original Revision: 2/14/2013.
6
Laser Enclosure to Elevated Rail Assembly Wyman Gordon Forging Locator Original Revision: 2/14/2013
-
Upload
kendall-wetherby -
Category
Documents
-
view
217 -
download
0
Transcript of Laser Enclosure to Elevated Rail Assembly Wyman Gordon Forging Locator Original Revision: 2/14/2013.
Step 1: Attach Bolts to Rail Attachment
Loosely attach bolts on both sides of
elevated rail attachments.
Step 2: Attach Elevated Rail to Laser Enclosure
Slide the elevated rail from the front of the enclosure bracket
to the back by placing the connected nut and bolt into
the track on the bracket
Step 3: Alignment
Align the elevated rail and bracket by positioning the
front rail attachment flush to the front of the enclosure
bracket